summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2019-11-06Merge tag 'stm32-dt-for-v5.4-fixes-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixes STM32 DT fixes for v5.4, round 2 Highlights: ----------- Fixes for STM32MP157: -Fix CAN RAM mapping -Change stmfx pinctrl definition for joystick and camera. Due to stmfx pinctrl fix done in v5.4-rc cycle, camera and joystick were no longer functional. * tag 'stm32-dt-for-v5.4-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: change joystick pinctrl definition on stm32mp157c-ev1 ARM: dts: stm32: remove OV5640 pinctrl definition on stm32mp157c-ev1 ARM: dts: stm32: Fix CAN RAM mapping on stm32mp157c ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157 Link: https://lore.kernel.org/r/d316b81f-a8d7-e9be-fe3c-73a242e7d941@st.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-06ARM: dts: stm32: change joystick pinctrl definition on stm32mp157c-ev1Amelie Delaunay
Pins used for joystick are all configured as input. "push-pull" is not a valid setting for an input pin. Fixes: a502b343ebd0 ("pinctrl: stmfx: update pinconf settings") Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-11-06ARM: dts: stm32: remove OV5640 pinctrl definition on stm32mp157c-ev1Amelie Delaunay
"push-pull" configuration is now fully handled by the gpiolib and the STMFX pinctrl driver. There is no longer need to declare a pinctrl group to only configure "push-pull" setting for the line. It is done directly by the gpiolib. Fixes: a502b343ebd0 ("pinctrl: stmfx: update pinconf settings") Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-11-06ARM: dts: stm32: Fix CAN RAM mapping on stm32mp157cChristophe Roullier
Split the 10Kbytes CAN message RAM to be able to use simultaneously FDCAN1 and FDCAN2 instances. First 5Kbytes are allocated to FDCAN1 and last 5Kbytes are used for FDCAN2. To do so, set the offset to 0x1400 in mram-cfg for FDCAN2. Fixes: d44d6e021301 ("ARM: dts: stm32: change CAN RAM mapping on stm32mp157c") Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-11-06ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157Patrice Chotard
Relax qspi pins slew-rate to minimize peak currents. Fixes: 844030057339 ("ARM: dts: stm32: add flash nor support on stm32mp157c eval board") Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-11-05ARM: dts: sun6i: Remove useless reset-namesMaxime Ripard
The HDMI controller definition in the A31 DTSI has a reset-names property, yet the binding for that controller doesn't declare it. Remove it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Chen-Yu Tsai <wens@csie.org>
2019-11-05dts: arm: sun8i: h3: Enable deinterlace unitJernej Skrabec
Allwinner H3 SoC contains deinterlace unit, which can be used in combination with VPU unit to decode and process interlaced videos. Add a node for it. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-11-05ARM: dts: sunxi: h3/h5: Add MBUS controller nodeJernej Skrabec
Both, H3 and H5, contain MBUS, which is the bus used by DMA devices to access system memory. MBUS controller is responsible for arbitration between channels based on set priority and can do some other things as well, like report bandwidth used. It also maps RAM region to different address than CPU. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-11-04vmlinux.lds.h: Replace RW_DATA_SECTION with RW_DATAKees Cook
Rename RW_DATA_SECTION to RW_DATA. (Calling this a "section" is a lie, since it's multiple sections and section flags cannot be applied to the macro.) Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # s390 Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: linux-alpha@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: linux-ia64@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Will Deacon <will@kernel.org> Cc: x86-ml <x86@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20191029211351.13243-14-keescook@chromium.org
2019-11-04vmlinux.lds.h: Move NOTES into RO_DATAKees Cook
The .notes section should be non-executable read-only data. As such, move it to the RO_DATA macro instead of being per-architecture defined. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # s390 Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: linux-alpha@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: linux-ia64@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Will Deacon <will@kernel.org> Cc: x86-ml <x86@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20191029211351.13243-11-keescook@chromium.org
2019-11-04ARM: dts: imx6ul-kontron-n6x1x-s: Remove an obsolete comment and fix indentationFrieder Schrempf
The ECSPI1 is not used for a FRAM chip, so remove the comment. While at it, also change some whitespaces to tabs to comply with the indentation style of the rest of the file. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04ARM: dts: imx6ul-kontron-n6x1x-s: Add vbus-supply and overcurrent polarity ↵Frieder Schrempf
to usb nodes To silence the warnings shown by the driver at boot time, we add a fixed regulator for the 5V supply of usbotg2 and specify the polarity of the overcurrent signal for usbotg1. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04ARM: dts: imx6ul-kontron-n6x1x: Add 'chosen' node with 'stdout-path'Frieder Schrempf
The Kontron N6x1x SoMs all use uart4 as a debug serial interface. Therefore we set it in the 'chosen' node. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04ARM: dts: Add support for two more Kontron evalkit boards 'N6311 S' and ↵Frieder Schrempf
'N6411 S' The 'N6311 S' and the 'N6411 S' are similar to the Kontron 'N6310 S' evaluation kit boards. Instead of the N6310 SoM, they feature a N6311 or N6411 SoM. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04ARM: dts: imx6ul-kontron-n6310-s: Move common nodes to a separate fileFrieder Schrempf
The baseboard for the Kontron N6310 SoM is also used for other SoMs such as N6311 and N6411. In order to share the code, we move the definitions of the baseboard to a separate dtsi file. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04ARM: dts: imx6ul-kontron-n6310-s: Disable the snvs-poweroff driverFrieder Schrempf
The snvs-poweroff driver can power off the system by pulling the PMIC_ON_REQ signal low, to let the PMIC disable the power. The Kontron SoMs do not have this signal connected, so let's remove the node. This fixes a real issue when the signal is asserted at poweroff, but not actually causing the power to turn off. It was observed, that in this case the system would not shut down properly. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Fixes: 1ea4b76cdfde ("ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04ARM: dts: Add support for two more Kontron SoMs N6311 and N6411Frieder Schrempf
The N6311 and the N6411 SoM are similar to the Kontron N6310 SoM. They are pin-compatible, but feature a larger RAM and NAND flash (512MiB instead of 256MiB). Further, the N6411 has an i.MX6ULL SoC, instead of an i.MX6UL. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04ARM: dts: imx6ul-kontron-n6310: Move common SoM nodes to a separate fileFrieder Schrempf
The Kontron N6311 and N6411 SoMs are very similar to N6310. In preparation to add support for them, we move the common nodes to a separate file imx6ul-kontron-n6x1x-som-common.dtsi. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04ARM: dts: imx7ulp-evk: Use APLL_PFD1 as usdhc's clock sourceAnson Huang
i.MX7ULP does NOT support runtime switching clock source for PCC, APLL_PFD1 by default is usdhc's clock source, so just use it in kernel to avoid below kernel dump during kernel boot up and make sure kernel can boot up with SD root file-system. [ 3.035892] Loading compiled-in X.509 certificates [ 3.136301] sdhci-esdhc-imx 40370000.mmc: Got CD GPIO [ 3.242886] mmc0: Reset 0x1 never completed. [ 3.247190] mmc0: sdhci: ============ SDHCI REGISTER DUMP =========== [ 3.253751] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00000002 [ 3.260218] mmc0: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000001 [ 3.266775] mmc0: sdhci: Argument: 0x00009a64 | Trn mode: 0x00000000 [ 3.273333] mmc0: sdhci: Present: 0x00088088 | Host ctl: 0x00000002 [ 3.279794] mmc0: sdhci: Power: 0x00000000 | Blk gap: 0x00000080 [ 3.286350] mmc0: sdhci: Wake-up: 0x00000008 | Clock: 0x0000007f [ 3.292901] mmc0: sdhci: Timeout: 0x0000008c | Int stat: 0x00000000 [ 3.299364] mmc0: sdhci: Int enab: 0x007f010b | Sig enab: 0x00000000 [ 3.305918] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00008402 [ 3.312471] mmc0: sdhci: Caps: 0x07eb0000 | Caps_1: 0x0000b400 [ 3.318934] mmc0: sdhci: Cmd: 0x0000113a | Max curr: 0x00ffffff [ 3.325488] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x0039b37f [ 3.332040] mmc0: sdhci: Resp[2]: 0x325b5900 | Resp[3]: 0x00400e00 [ 3.338501] mmc0: sdhci: Host ctl2: 0x00000000 [ 3.343051] mmc0: sdhci: ============================================ Fixes: 20434dc92c05 ("ARM: dts: imx: add common imx7ulp dtsi support") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Tested-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04ARM: dts: imx: add devicetree for Kobo Clara HDAndreas Kemnade
This adds a devicetree for the Kobo Clara HD Ebook reader. It is on based on boards called "e60k02". It is equipped with an imx6sll SoC. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04ARM: dts: add Netronix E60K02 board common fileAndreas Kemnade
The Netronix board E60K02 can be found some several Ebook-Readers, at least the Kobo Clara HD and the Tolino Shine 3. The board is equipped with different SoCs requiring different pinmuxes. For now the following peripherals are included: - LED - Power Key - Cover (gpio via hall sensor) - RC5T619 PMIC (the kernel misses support for rtc and charger subdevices). - Backlight via lm3630a - Wifi sdio chip detection (mmc-powerseq and stuff) It is based on vendor kernel but heavily reworked due to many changed bindings. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-03Merge tag 'mvebu-dt-5.5-1' of git://git.infradead.org/linux-mvebu into arm/dtOlof Johansson
mvebu dt for 5.5 (part 1) - Enable L2 cache parity and ECC on a Armada XP SoC family and allow to use in on the Armada 38x SoCs too. - Use correct name for the rs5c372a on synology (Kirkwood based) - Rename "sa-sram" node to "sram" on dove * tag 'mvebu-dt-5.5-1' of git://git.infradead.org/linux-mvebu: ARM: dts: armada-xp: add label to sdram-controller node ARM: dts: mvebu: add sdram controller node to Armada-38x ARM: dts: armada-xp: enable L2 cache parity and ecc on db-xc3-24g4xg ARM: dts: dove: Rename "sa-sram" node to "sram" ARM: dts: kirkwood: synology: Fix rs5c372 RTC entry Link: https://lore.kernel.org/r/8736f44q9l.fsf@FE-laptop Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'tegra-for-5.5-arm-defconfig' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig ARM: tegra: Default configuration changes for v5.5-rc1 Enables the Tegra VDE driver by default. This is currently in staging but can be used with existing userspace to do hardware-accelerated video decoding of H.264 streams. * tag 'tegra-for-5.5-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Enable Tegra VDE driver in tegra_defconfig Link: https://lore.kernel.org/r/20191102144521.3863321-7-thierry.reding@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'tegra-for-5.5-arm-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt ARM: tegra: Device tree changes for v5.5-rc1 Adds support for CPU frequency scaling on Tegra20 and Tegra30, EMC frequency scaling on Tegra30, SMMU support for VDE on Tegra30, the STMPE ADC found on Toradex T30 modules as well as fixes for eDP support on Venice2. * tag 'tegra-for-5.5-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: cardhu-a04: Add CPU Operating Performance Points ARM: tegra: cardhu-a04: Set up voltage regulators for DVFS ARM: tegra: trimslice: Add CPU Operating Performance Points ARM: tegra: paz00: Add CPU Operating Performance Points ARM: tegra: paz00: Set up voltage regulators for DVFS ARM: tegra: Add CPU Operating Performance Points for Tegra30 ARM: tegra: Add CPU Operating Performance Points for Tegra20 ARM: tegra: Add Tegra30 CPU clock ARM: tegra: Add Tegra20 CPU clock ARM: tegra: Add External Memory Controller node on Tegra30 ARM: tegra: nyan-big: Add timings for RAM codes 4 and 6 ARM: tegra: Connect SMMU with Video Decoder Engine on Tegra30 ARM: tegra: Add eDP power supplies on Venice2 ARM: tegra: Add SOR0_OUT clock on Tegra124 ARM: tegra: Add stmpe-adc DT node to Toradex T30 modules Link: https://lore.kernel.org/r/20191102144521.3863321-6-thierry.reding@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-04ARM: dts: vf-colibri: fix typo in top-level module compatibleMarcel Ziswiler
Fix typo in top-level module compatible. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-03Merge tag 'tegra-for-5.5-arm-core' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/soc ARM: tegra: Core changes for v5.5-rc1 Contains two fixes for CPU idle and suspend/resume on early Tegra SoCs. * tag 'tegra-for-5.5-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Use WFE for power-gating on Tegra30 ARM: tegra: Fix FLOW_CTLR_HALT register clobbering by tegra_resume() Link: https://lore.kernel.org/r/20191102144521.3863321-5-thierry.reding@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'sunxi-config-for-5.5-2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig Two new drivers enabled in sunxi_defconfig: one for the PHY found on multiple boards, one for the new crypto driver. * tag 'sunxi-config-for-5.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: configs: sunxi: Enable MICREL_PHY ARM: configs: sunxi: add new Allwinner crypto options Link: https://lore.kernel.org/r/27125172-7ce8-427e-83f9-8e9bd69d50a4.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'sunxi-dt-for-5.5-1' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual bunch of DT patches, with this time mostly: - Mali GPU support for the H6 - Two new crypto drivers enablement - A few fixes to our DTs, fixed through the validation effort - New boards: NanoPi Duo2 * tag 'sunxi-dt-for-5.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (22 commits) dt-bindings: arm: sunxi: add FriendlyARM NanoPi Duo2 ARM: dts: sun8i: add FriendlyARM NanoPi Duo2 arm64: allwinner: h6: Enable GPU node for Tanix TX6 arm64: dts: allwinner: bluetooth for Emlid Neutis N5 ARM: dts: sunxi: h3/h5: add missing uart2 rts/cts pins ARM: dts: sun9i: a80: Add Security System node ARM: dts: sun8i: a83t: Add Security System node arm64: dts: allwinner: sun50i: Add Crypto Engine node on H6 arm64: dts: allwinner: sun50i: Add crypto engine node on H5 arm64: dts: allwinner: sun50i: Add Crypto Engine node on A64 ARM: dts: sun8i: H3: Add Crypto Engine node ARM: dts: sun8i: R40: add crypto engine node dt-bindings: crypto: Add DT bindings documentation for sun8i-ce Crypto Engine arm64: dts: allwinner: Add mali GPU supply for H6 boards arm64: dts: allwinner: Add ARM Mali GPU node for H6 ARM: dts: sun8i: a83t: a711: Add touchscreen node ARM: dts: sun5i: olinuxino micro: Fix AT24 node name ARM: dts: sun9i: Add missing watchdog clocks arm64: dts: sun50i: sopine-baseboard: Expose serial1, serial2 and serial3 arm64: dts: allwinner: orange-pi-3: Enable UART1 / Bluetooth ... Link: https://lore.kernel.org/r/1bf18c83-f41d-4353-9ca2-9585b8693df2.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03ARM: dts: atlas7: Fix "debounce-interval" property misspellingGeert Uytterhoeven
"debounce_interval" was never supported. Link: https://lore.kernel.org/r/20191101160356.32034-3-geert+renesas@glider.be Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Barry Song <baohua@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'renesas-arm-soc-for-v5.5-tag1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/soc Renesas ARM SoC updates for v5.5 - Drop legacy DT clock support on R-Car Gen2. * tag 'renesas-arm-soc-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: shmobile: rcar-gen2: Drop legacy DT clock support Link: https://lore.kernel.org/r/20191101155842.31467-3-geert+renesas@glider.be Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'renesas-arm-defconfig-for-v5.5-tag1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig Renesas ARM defconfig updates for v5.5 - Refresh shmobile_defconfig for v5.4-rc1. * tag 'renesas-arm-defconfig-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: shmobile: defconfig: Refresh for v5.4-rc1 Link: https://lore.kernel.org/r/20191101155842.31467-2-geert+renesas@glider.be Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'omap-for-v5.5/prm-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt PRM reset control dts changes for v5.5 merge window This series of changes adds the PRM reset driver nodes for am3/4, omap4/5 and dra7 SoCs. The reset driver changes make it easier to add support for various accelerators for TI SoCs in a more generic way. Note that this branch is based on the PRM reset driver changes branch. * tag 'omap-for-v5.5/prm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap5: Add PRM data ARM: dts: am43xx: Add PRM data ARM: dts: am33xx: Add PRM data ARM: dts: omap4: add PRM nodes ARM: dts: dra7: add PRM nodes soc: ti: omap-prm: add omap5 PRM data soc: ti: omap-prm: add am4 PRM data soc: ti: omap-prm: add dra7 PRM data soc: ti: omap-prm: add data for am33xx soc: ti: omap-prm: add omap4 PRM data soc: ti: omap-prm: add support for denying idle for reset clockdomain soc: ti: omap-prm: poll for reset complete during de-assert soc: ti: add initial PRM driver with reset control support dt-bindings: omap: add new binding for PRM instances Link: https://lore.kernel.org/r/pull-1572623173-281197@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03ARM: dts: mmp3-dell-ariel: Add a serial point aliasLubomir Rintel
Make sure UART3, where the console is, is called ttyS2. That is consistent with the early console. Link: https://lore.kernel.org/r/20191031163455.1711872-5-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03ARM: dts: mmp3-dell-ariel: Add a name to /memory nodeLubomir Rintel
Ponted out by DTC: <stdout>: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name Link: https://lore.kernel.org/r/20191031163455.1711872-4-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03ARM: dts: mmp3: Fix /soc/watchdog node nameLubomir Rintel
There's a typo there that rightfully upsets DTS: <stdout>: Warning (simple_bus_reg): /soc/watchdog@2c000620: simple-bus unit address format error, expected "e0000620" Link: https://lore.kernel.org/r/20191031163455.1711872-3-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03ARM: dts: mmp3: Add a name to /clocks nodeLubomir Rintel
It should have one and DTC is indeed unhappy about its absence: <stdout>: Warning (unit_address_vs_reg): /soc/clocks: node has a reg or ranges property, but no unit name Link: https://lore.kernel.org/r/20191031163455.1711872-2-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03ARM: ASPEED: update default ARCH_NR_GPIO for ARCH_ASPEEDTao Ren
Increase the max number of GPIOs from default 512 to 1024 for ASPEED platforms, because Facebook Yamp (AST2500) BMC platform has total 594 GPIO pins (232 provided by ASPEED SoC, and 362 by I/O Expanders). Link: https://lore.kernel.org/r/20191031014040.12898-1-rentao.bupt@gmail.com Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03ARM: dts: Add RDA8810PL GPIO controllersManivannan Sadhasivam
Add GPIO controllers for RDA8810PL SoC. There are 4 GPIO controllers in this SoC with maximum of 32 gpios. Except GPIOC, all controllers are capable of generating edge/level interrupts from first 8 lines. Link: https://lore.kernel.org/r/20191030101154.6312-2-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'hisi-armv7-soc-for-5.5' of git://github.com/hisilicon/linux-hisi ↵Olof Johansson
into arm/soc ARM: mach-hisi: Hisilicon SoC updates for 5.5 - drop the ARCH_MULTI_V7 dependency in the sub-menu of ARCH_HISI since ARCH_HISI depends on ARCH_MULTI_V7 * tag 'hisi-armv7-soc-for-5.5' of git://github.com/hisilicon/linux-hisi: ARM: hisi: drop useless depend on ARCH_MULTI_V7 Link: https://lore.kernel.org/r/5DB9593D.9050904@hisilicon.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge branch 'for_5.5/keystone-dts' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/dt * 'for_5.5/keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: configs: keystone: enable cpts ARM: dts: k2l-netcp: add cpts refclk_mux node ARM: dts: k2hk-netcp: add cpts refclk_mux node ARM: dts: k2e-netcp: add cpts refclk_mux node ARM: dts: k2e-clocks: add input ext. fixed clocks tsipclka/b ARM: dts: keystone-clocks: add input fixed clocks Link: https://lore.kernel.org/r/1572372856-20598-2-git-send-email-santosh.shilimkar@oracle.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge branch 'for_5.5/driver-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers * 'for_5.5/driver-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: memory: emif: remove set but not used variables 'cs1_used' and 'custom_configs' soc: ti: omap-prm: fix return value check in omap_prm_probe() soc: ti: omap-prm: add omap5 PRM data soc: ti: omap-prm: add am4 PRM data soc: ti: omap-prm: add dra7 PRM data soc: ti: omap-prm: add data for am33xx soc: ti: omap-prm: add omap4 PRM data soc: ti: omap-prm: add support for denying idle for reset clockdomain soc: ti: omap-prm: poll for reset complete during de-assert soc: ti: add initial PRM driver with reset control support dt-bindings: omap: add new binding for PRM instances Link: https://lore.kernel.org/r/1572372856-20598-1-git-send-email-santosh.shilimkar@oracle.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-04ARM: imx: use generic function to exit coherencyStefan Agner
The common ARM architecture code provides a generic function to exit coherency called v7_exit_coherency_flush(). Replace the machine specific implementation using the generic function. Tested on a i.MX 6Dual by hotplugging the secondary CPU under load through sysfs several 1000 times. Tested-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-02Merge tag 'socfpga_dts_updates_for_v5.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.5 - Arria10 - modify QSPI read-delay property - Agilex - Add QSPI support - Enable USB and LEDs - Add service layer, fpga manager support - Stratix10 - Update QSPI reg address * tag 'socfpga_dts_updates_for_v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: agilex: add service layer, fpga manager and fpga region arm64: agilex: enable USB and LEDs on agilex devkit arm64: dts: altera: update QSPI reg addresses for Stratix10 arm64: dts: agilex: add QSPI support for Intel Agilex ARM: dts: arria10: Modify QSPI read_delay for Arria10 Link: https://lore.kernel.org/r/20191029143737.24850-1-dinguyen@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-02Merge tag 'sunxi-fixes-for-5.4-2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes One fix for the A83t powerdown, and one for the TBS A711 tablet wifi suspend * tag 'sunxi-fixes-for-5.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: sunxi: Fix CPU powerdown on A83T ARM: dts: sun8i-a83t-tbs-a711: Fix WiFi resume from suspend Link: https://lore.kernel.org/r/3935640c-289c-40b2-b156-79787aed8c60.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-02Merge tag 'imx-fixes-5.4-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.4, 2nd round: - Get SNVS power key back to work for imx6-logicpd board. It was accidentally disabled by commit 770856f0da5d ("ARM: dts: imx6qdl: Enable SNVS power key according to board design"). - Fix sparse warnings in IMX GPC driver by making the initializers in imx_gpc_domains C99 format. - Fix an interrupt storm coming from accelerometer on imx6qdl-sabreauto board. This is seen with upstream version U-Boot where pinctrl is not configured for the device. - Fix sdma device compatible string for i.MX8MM and i.MX8MN SoC. - Fix compatible of PCA9547 i2c-mux on LS1028A QDS board to get the device probed correctly. * tag 'imx-fixes-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mn: fix compatible string for sdma arm64: dts: imx8mm: fix compatible string for sdma ARM: dts: imx6-logicpd: Re-enable SNVS power key soc: imx: gpc: fix initialiser format ARM: dts: imx6qdl-sabreauto: Fix storm of accelerometer interrupts arm64: dts: ls1028a: fix a compatible issue Link: https://lore.kernel.org/r/20191029110334.GA20928@dragon Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-02ARM: dts: sun8i: add FriendlyARM NanoPi Duo2Karl Palsson
This is an Allwinner H3 based board, with 512MB ram, a USB OTG port, microsd slot, an onboard AP6212A wifi/bluetooth module, and a CSI connector. Full details and schematic available from vendor: http://wiki.friendlyarm.com/wiki/index.php/NanoPi_Duo2 Signed-off-by: Karl Palsson <karlp@tweak.net.au> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-11-01ARM: shmobile: defconfig: Refresh for v5.4-rc1Geert Uytterhoeven
Update the defconfig for Renesas ARM boards: - Drop CONFIG_ARM_ERRATA_754322=y (auto-enabled since commit 2eced4607a1e6f51 ("soc: renesas: Enable ARM_ERRATA_754322 for affected Cortex-A9")), - Drop CONFIG_MTD_M25P80=y (removed in commit b35b9a10362d2034 ("mtd: spi-nor: Move m25p80 code in spi-nor.c")), - Drop CONFIG_LCD_CLASS_DEVICE=n (no longer auto-enabled since commit bcd69da98e36afcc ("video: backlight: Drop default m for {LCD,BACKLIGHT_CLASS_DEVICE}")). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191025135325.32242-1-geert+renesas@glider.be
2019-11-01ARM: dts: aspeed-g5: Add SGPIO descriptionHongwei Zhang
Add SGPIO node to the ASPEED AST2500 device tree. Signed-off-by: Hongwei Zhang <hongweiz@ami.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-01ARM: dts: aspeed: yamp: Use common dtsiTao Ren
Simplify the Yamp device tree by using the common dtsi. In addition this enables the following the second firmware flash and the eMMC device in slot #1. Signed-off-by: Tao Ren <taoren@fb.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-01ARM: dts: aspeed: minipack: Use common dtsiTao Ren
Simplify the Minipack device tree by using the common dtsi. In addition this enables the enabling the second firmware flash, and updates it's size from 32MB to 64MB. It also enables the eMMC device in slot #1. Signed-off-by: Tao Ren <taoren@fb.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
generated by cgit (git 2.34.1) at 2025-09-18 08:39:52 +0000