summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2020-03-25Merge tag 'stm32-dt-for-v5.7-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.3, round 1 Highlights: ---------- - Add support for DH Electronics DHCOM SoM and PDK2 rev. 400 carrier board. It is based on stm32mp157c SoC. - Add OTG full support on stm32mp15. - Fix issues seen during yaml validation on stpmic and stmfx. - Add i2c power/wakeup support on stm32mp15. - Add card detect on sdcard on stm32mp boards * tag 'stm32-dt-for-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (25 commits) ARM: dts: stm32: use correct vqmmc regu for eMMC on stm32mp1 ED1/EV1 boards ARM: dts: stm32: add disable-wp property for SD-card on STM32MP1 boards ARM: dts: stm32: add cd-gpios properties for SD-cards on STM32MP1 boards ARM: dts: stm32: Do clean up in stmpic nodes on stm32mp15 boards ARM: dts: stm32: Rename stmfx joystick pins on stm32mp157c-ev1 ARM: dts: stm32: add cpu clock-frequency property on stm32mp15x ARM: dts: stm32: add wakeup-source in all I2C nodes of stm32mp157c ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp157c-ed1 ARM: dts: stm32: add i2c2/i2c5 sleep pinctrl on stm32mp157c-ev1 ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp15xx-dkx ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp15 DK boards ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp157c-ed1 ARM: dts: stm32: Correct stmfx node name on stm32mp157c-ev1 board ARM: dts: stm32: Correct stmfx node name on stm32746g-eval board ARM: dts: stm32: add resets property on all DMA nodes on stm32mp151 ARM: dts: stm32: enable USB OTG Dual Role on stm32mp157c-ev1 ARM: dts: stm32: add USB OTG pinctrl to stm32mp15 ARM: dts: stm32: add USB OTG full support on stm32mp151 ARM: dts: stm32: remove useless properties in stm32mp157a-avenger96 stmpic node ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board ... Link: https://lore.kernel.org/r/ded09d01-df47-9572-4679-34669bff8916@st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'renesas-arm-dt-for-v5.7-tag2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.7 (take two) - LCD/touchscreen support for the iwg22d-sodimm board. * tag 'renesas-arm-dt-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: dts: iwg22d-sodimm: Enable touchscreen ARM: dts: iwg22d-sodimm: Enable LCD panel Link: https://lore.kernel.org/r/20200313154304.1636-2-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'sunxi-dt-for-5.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner Device Tree Changes for v5.7 A fairly large set of changes for v5.7, including some new devices. SoC specific changes: - SPI on H6 SoC enabled - Thermal sensor on R40 SoC enabled - Deinterlace core hardware on A64 SoC enabled - Redundant assigned-clocks properties removed - required clock rates are now enforced by drivers - LVDS panel support on A20 SoC enabled - PMU compatible fixed for H5 and H6 SoCs - Thermal trip points added for A83T and H5 SoCs - (Image) Rotation core hardware on A83T and A64 SoCs enabled Device specific changes: - Pine64 PineTab and PinePhone added - Various cleanups and improvements for Pine64 PineBook - GPIO pin bank regulator supplies added for A64-OlinXino - eMMC enabled on Orange Pi 3 - PocketBook Touch Lux 3 added - Linutronix Testbox v2 added - Ethernet enabled on Orange Pi One Plus - HDMI enabled on H6-based Orange Pi boards * tag 'sunxi-dt-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (46 commits) arm64: dts: allwinner: a64: add node for rotation core ARM: dts: sun8i: a83t: Add device node for rotation core arm64: dts: allwinner: a64: Fix display clock register range ARM: dts: sunxi: Fix DE2 clocks register range arm64: dts: allwinner: h6: orangepi: Enable HDMI arm64: dts: allwinner: h6: orangepi-one-plus: Enable ethernet arm64: dts: allwinner: h6: Move ext. oscillator to board DTs arm64: dts: allwinner: Add initial support for Pine64 PinePhone dt-bindings: arm: sunxi: Add PinePhone 1.0 and 1.1 bindings arm64: dts: sun50i-a64: Add i2c2 pins ARM: dts: sunxi: h3/h5: add r_pwm node arm64: allwinner: a64: enable LCD-related hardware for Pinebook ARM: dts: sun8i-a83t: Add thermal trip points/cooling maps ARM: dts: sun8i-h3: Add thermal trip points/cooling maps arm64: dts: allwinner: h6: Fix PMU compatible arm64: dts: allwinner: h5: Fix PMU compatible ARM: dts: sun8i-a83t-tbs-a711: Drop superfluous dr_mode arm64: dts: sun50i-h5-orange-pi-pc2: Add CPUX voltage regulator ARM: dts: sun5i: Add PocketBook Touch Lux 3 support dt-bindings: arm: sunxi: Add PocketBook Touch Lux 3 ... Link: https://lore.kernel.org/r/20200313055459.GA19820@wens.csie.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'arm-soc/for-5.7/devicetree' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/dt This pull request contains Broadcom ARM-based SoCs Device Tree changes for 5.7, please pull the following: - Stefan adds GPIO labels to the Raspberry Pi 4 Model B board DTS - Nicolas moves the eMMC2 controller into its separate node in order for platform firmware to perform the necessary "dma-ranges" property patching based on the chip revision since the eMMC controller has different addressing constraints. - Florian convers a whole bunch of Broadcom boards bindings from text to YAML. * tag 'arm-soc/for-5.7/devicetree' of https://github.com/Broadcom/stblinux: dt-bindings: arm: Document Broadcom SoCs 'secondary-boot-reg' dt-bindings: arm: bcm: Convert Vulcan to YAML dt-bindings: arm: bcm: Convert BCM11351 to YAML dt-bindings: arm: bcm: Convert BCM4708 to YAML dt-bindings: arm: bcm: Convert BCM23550 to YAML dt-bindings: arm: bcm: Convert BCM21664 to YAML dt-bindings: arm: bcm: Convert Stingray to YAML dt-bindings: arm: bcm: Convert Northstar 2 to YAML dt-bindings: arm: bcm: Convert Northstar Plus to YAML dt-bindings: arm: bcm: Convert Hurricane 2 to YAML dt-bindings: arm: bcm: Convert Cygnus to YAML ARM: dts: bcm2711: Move emmc2 into its own bus ARM: dts: bcm2711-rpi-4-b: Add SoC GPIO labels Link: https://lore.kernel.org/r/20200311212012.9418-2-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'omap-for-v5.7/dt-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omaps for v5.7 merge window Few device tree changes for omaps for v5.7 to configure omap5 AESS module and to add idle_states for am335x and am437x cpuidle. * tag 'omap-for-v5.7/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am4372: Add idle_states for cpuidle ARM: dts: am33xx: Add idle_states for cpuidle ARM: dts: Configure omap5 AESS Link: https://lore.kernel.org/r/pull-1583511417-919838@atomide.com-4 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'versatile-dts-v5.7-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/dt Versatile DTS updates for the v5.7 series take one: - Schema validation for the top level of all ARM reference designs: Integrator, Versatile, RealView, Juno. - Clean up some node names in the trees so they pass validation fine. - Drop the old text bindings. - A top level DMA ranges patch from Rob. * tag 'versatile-dts-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM/arm64: dts: Rename SMB bus to just bus dt-bindings: arm: Drop the non-YAML bindings dt-bindings: arm: Add Versatile Express and Juno YAML schema dt-bindings: arm: Add RealView YAML schema dt-bindings: arm: Add Versatile YAML schema dt-bindings: arm: Add Integrator YAML schema ARM: dts: RealView: Fix the name of the SoC node ARM: dts: Versatile: Use syscon as node name for IB2 ARM: dts: integratorap: Remove top level dma-ranges Link: https://lore.kernel.org/r/CACRpkdbbniYVnsE-pAmU2qCerswserNgEFtY48XQ+_K+DUNC9Q@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'renesas-arm-dt-for-v5.7-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.7 - Miscellaneous fixes and improvements. * tag 'renesas-arm-dt-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: dts: rzg1: Add reset control properties for display ARM: dts: rcar-gen2: Add reset control properties for display ARM: dts: r8a7745: Convert to new DU DT bindings ARM: dts: r7s72100: Add SPIBSC clocks ARM: dts: renesas: Group tuples in operating-points properties ARM: dts: renesas: Add missing ethernet PHY reset GPIO on Gen2 reference boards Link: https://lore.kernel.org/r/20200226110221.19288-2-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'tegra-for-5.7-cpuidle' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/soc cpuidle: tegra: Changes for v5.7-rc1 These changes unify CPU idle support for Tegra20, Tegra30 and Tegra114. * tag 'tegra-for-5.7-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: cpuidle: tegra: Disable CC6 state if LP2 unavailable cpuidle: tegra: Squash Tegra114 driver into the common driver cpuidle: tegra: Squash Tegra30 driver into the common driver cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle Link: https://lore.kernel.org/r/20200313165848.2915133-9-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'zynq-soc-for-v5.7' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann
arm/soc ARM: Xilinx Zynq SoC patches for v5.7 - Use proper clock header in soc code * tag 'zynq-soc-for-v5.7' of https://github.com/Xilinx/linux-xlnx: ARM: zynq: Replace <linux/clk-provider.h> by <linux/of_clk.h> Link: https://lore.kernel.org/r/005af9f0-85b5-7bac-2d99-5bb3857debb3@monstr.eu Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'at91-5.7-soc' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/soc AT91 SoC for 5.7 - Rework PM to support sam9x60 * tag 'at91-5.7-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: pm: add quirk for sam9x60's ulp1 ARM: at91: pm: add plla disable/enable support for sam9x60 clk: at91: move sam9x60's PLL register offsets to PMC header ARM: at91: pm: s/sfr/sfrbu in pm_suspend.S ARM: at91: pm: add pmc_version member to at91_pm_data ARM: at91: pm: add macros for plla disable/enable ARM: at91: pm: revert do not disable/enable PLLA for ULP modes ARM: at91: pm: use proper master clock register offset ARM: at91: Drop unneeded select of COMMON_CLK Link: https://lore.kernel.org/r/20200322090116.GA208895@piout.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'imx-soc-5.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/soc i.MX SoC changes for 5.7: - A number of cleanups from Anson Huang to remove unneeded includes, drop unnecessary newlines and base check etc. - Apply Cortex-A9 specific errata only to Cortex-A9 based i.MX SoCs and avoid impacting Cortex-A7 based designs. * tag 'imx-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: Drop unnecessary src_base check ARM: imx: Remove unnecessary blank lines ARM: imx: Add missing of_node_put() ARM: imx: Remove unused include of linux/of.h on mach-imx6sl.c ARM: imx: Remove unused includes on mach-imx6q.c ARM: imx: Remove unused include of linux/irqchip/arm-gic.h ARM: imx: limit errata selection to Cortex-A9 based designs Link: https://lore.kernel.org/r/20200318051918.32579-2-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'mvebu-arm-5.7-1' of git://git.infradead.org/linux-mvebu into arm/socArnd Bergmann
mvebu arm for 5.6 (part 1) Various cleanup: On Orion5x: - Drop unneeded select of PCI_DOMAINS_GENERIC - Remove unneeded variable ret - Replace setup_irq() by request_irq() On Dove: Mark dove_io_desc as __maybe_unused * tag 'mvebu-arm-5.7-1' of git://git.infradead.org/linux-mvebu: arm: mach-dove: Mark dove_io_desc as __maybe_unused ARM: orion: replace setup_irq() by request_irq() ARM: orion5x: ts78xx: Remove unneeded variable ret ARM: orion5x: Drop unneeded select of PCI_DOMAINS_GENERIC Link: https://lore.kernel.org/r/87eetux7um.fsf@FE-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'tegra-for-5.7-arm-core' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/soc ARM: tegra: Core changes for v5.7-rc1 These patches a preparatory work to move the CPU idle drivers into drivers/cpuidle. * tag 'tegra-for-5.7-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: cpuidle: Remove unnecessary memory barrier ARM: tegra: cpuidle: Make abort_flag atomic ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2 ARM: tegra: Make outer_disable() open-coded ARM: tegra: Rename some of the newly exposed PM functions ARM: tegra: Expose PM functions required for new cpuidle driver ARM: tegra: Propagate error from tegra_idle_lp2_last() ARM: tegra: Change tegra_set_cpu_in_lp2() type to void ARM: tegra: Remove pen-locking from cpuidle-tegra20 ARM: tegra: Add tegra_pm_park_secondary_cpu() ARM: tegra: Compile sleep-tegra20/30.S unconditionally Link: https://lore.kernel.org/r/20200313165848.2915133-5-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'stm32-soc-for-v5.7-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/soc STM32 SoC updates for v5.7, round 1 Highlights: ---------- - Add early console support for all STM32 SoCs: F4/F7/H7/MP1 * tag 'stm32-soc-for-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: debug: stm32: add UART early console support for STM32MP1 ARM: debug: stm32: add UART early console support for STM32H7 ARM: debug: stm32: add UART early console configuration for STM32F7 ARM: debug: stm32: add UART early console configuration for STM32F4 Link: https://lore.kernel.org/r/4e427e37-99c9-239a-f3f8-a3bf50eb1eb2@st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'sunxi-core-for-5.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/soc Allwinner Core Changes for v5.7 Just one change for our mach code for including the correct clk header. * tag 'sunxi-core-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: sunxi: Replace <linux/clk-provider.h> by <linux/of_clk.h> Link: https://lore.kernel.org/r/20200313055342.GA19760@wens.csie.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'arm-soc/for-5.7/soc' of https://github.com/Broadcom/stblinux into ↵Arnd Bergmann
arm/soc This pull request contains Broadcom ARM-based SoCs changes for 5.7, please pull the following: - Geert drops redundant selects for Broadcom SoCs which are already implied by ARCH_MULTI_V6_V7 * tag 'arm-soc/for-5.7/soc' of https://github.com/Broadcom/stblinux: ARM: bcm: Drop unneeded select of PCI_DOMAINS_GENERIC, HAVE_SMP, TIMER_OF Link: https://lore.kernel.org/r/20200311212012.9418-3-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'omap-for-v5.7/pm33xx-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc PM changes for am335x and am437x for v5.7 merge window A series of changes from Dave Gerlach to enable basic cpuidle support for am335x and am437x based on generic cpuidle-arm driver. * tag 'omap-for-v5.7/pm33xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: omap2plus_defconfig: Add CONFIG_ARM_CPUIDLE soc: ti: pm33xx: Add base cpuidle support ARM: OMAP2+: pm33xx-core: Extend platform_data ops for cpuidle ARM: OMAP2+: pm33xx-core: Add cpuidle_ops for am335x/am437x dt-bindings: arm: cpu: Add TI AM335x and AM437x enable method Link: https://lore.kernel.org/r/pull-1583511417-919838@atomide.com-2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'omap-for-v5.7/soc-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc SoC changes for omaps for v5.7 merge window A change to improve the warning output for device tree data mismatch as compared to legacy platform data for ti-sysc related interconnect target modules. And change omap1 to request_irq() instead of setup_irq(). * tag 'omap-for-v5.7/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: replace setup_irq() by request_irq() ARM: OMAP2+: Improve handling of ti-sysc related sysc_fields Link: https://lore.kernel.org/r/pull-1583511417-919838@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'renesas-arm-soc-for-v5.7-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/soc Renesas ARM SoC updates for v5.7 - Enable ARM global timer on Cortex-A9 MPCore SoCs, - A minor cleanup. * tag 'renesas-arm-soc-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: shmobile: Replace <linux/clk-provider.h> by <linux/of_clk.h> ARM: shmobile: Enable ARM_GLOBAL_TIMER on Cortex-A9 MPCore SoCs Link: https://lore.kernel.org/r/20200226110221.19288-3-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'at91-5.7-defconfig' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/config AT91 defconfig for 5.7 - Add sama5d4 watchdog to at91_dt_defconfig as it is present on sam9x60 * tag 'at91-5.7-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: configs: at91: enable sama5d4 compatible watchdog Link: https://lore.kernel.org/r/20200322085711.GA208700@piout.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'omap-for-v5.7/defconfig-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/config Defconfig changes for omaps for v5.7 merge window We want to enable some more features for omap2plus_defconfig to make it more usable: - Enable scururity for ext4 so setcap works - Enable simple-pm-bus so it can be later on be configured in the dts files as needed - Enable zram as loadable modules as we do have devices using it - Enable more devices for droid4 for 1-wire battery eeprom and isl29028 proximity sensor - Enable mcpdm clocks from the PMIC as loadable modules - Enable ina2xx_adc as loadable module - And finally let's also omap2plus_deconfig for moved and dropped options * tag 'omap-for-v5.7/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: omap2plus_defconfig: Update for moved and dropped options ARM: omap2plus_defconfig: Enable ina2xx_adc as a loadable module ARM: omap2plus_defconfig: Enable McPDM optional PMIC clock as modules ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules ARM: omap2plus_defconfig: Enable zram as loadable modules ARM: omap2plus_defconfig: Enable simple-pm-bus ARM: omap2plus_defconfig: Enable ext4 security for setcap Link: https://lore.kernel.org/r/pull-1584575344-983293@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'imx-defconfig-5.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/config i.MX defconfig changes for 5.7: - A seris from Li Yang to make defconfig useful for NXP LS family SoCs. Most drivers are built as module there, but those helping boot system with NFS are enabled built-in. - Enable i.MX8MP pinctrl and i.MX8MM thermal driver support in defconfig. - Enable i.MX DRM driver support for multi_v7_defconfig. - Enable ATMEL_MXT and AD7879 touch support for imx_v6_v7_defconfig. * tag 'imx-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (22 commits) arm64: defconfig: Enable e1000 device arm64: defconfig: Enable PHY devices used on QorIQ boards arm64: defconfig: Enable RTC devices for QorIQ boards arm64: defconfig: Enable flash device drivers for QorIQ boards arm64: defconfig: Enable ARM Mali display driver arm64: defconfig: Enable QorIQ GPIO driver arm64: defconfig: Enable QorIQ IFC NAND controller driver arm64: defconfig: Enable ARM SBSA watchdog driver arm64: defconfig: Enable QorIQ cpufreq driver arm64: defconfig: Enable NXP/FSL SPI controller drivers arm64: defconfig: Enable ENETC Ethernet controller and FELIX switch arm64: defconfig: Enable QorIQ DPAA2 drivers arm64: defconfig: Enable QorIQ DPAA1 drivers arm64: defconfig: Enable NXP flexcan driver arm64: defconfig: run through savedefconfig for ordering arm64: defconfig: Enable CONFIG_IMX8MM_THERMAL as module arm64: defconfig: add i.MX system controller thermal support ARM: multi_v7_defconfig: enable drm imx support arm64: defconfig: Enable CONFIG_PCIE_LAYERSCAPE_GEN4 ARM: imx_v6_v7_defconfig: Enable TOUCHSCREEN_AD7879 ... Link: https://lore.kernel.org/r/20200318051918.32579-6-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'qcom-defconfig-for-5.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/config Qualcomm ARM defconfig updates for v5.7 Enable QRTR and the Broadcomm bluetooth driver in the qcom_defconfig, for usage on the 8974 devices. * tag 'qcom-defconfig-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: qcom_defconfig: Enable QRTR ARM: qcom_defconfig: add Broadcom bluetooth options Link: https://lore.kernel.org/r/20200318043931.GC470201@yoga Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'samsung-defconfig-5.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/config Samsung defconfig changes for v5.7 1. Enable Energy Model and Multi-core scheduler because they fit common use of Exynos SoCs - mobile devices, 2. Enable more drivers for GalaxyS3/Trats2. * tag 'samsung-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: exynos_defconfig: Add more drivers for GalaxyS3/Trats2 ARM: exynos_defconfig: Enable SCHED_MC and ENERGY_MODEL ARM: exynos_defconfig: Enable SquashFS and increase RAM block device size Link: https://lore.kernel.org/r/20200316175652.5604-2-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'tegra-for-5.7-arm-defconfig' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/config ARM: tegra: Default configuration changes for v5.7-rc1 These patches enable the new, unified CPU idle driver for Tegra20, Tegra30 and Tegra114. * tag 'tegra-for-5.7-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Enable Tegra cpuidle driver in tegra_defconfig ARM: multi_v7_defconfig: Enable Tegra cpuidle driver Link: https://lore.kernel.org/r/20200313165848.2915133-7-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'arm-soc/for-5.7/defconfig' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/config This pull request contains Broadcom ARM-based SoCs defconfig changes for v5.7, please pull the following: - Marek enables the Raspberry Pi 4 specific drivers: GENET, thermal, and GPIO regulator support in bcm2835_defconfig * tag 'arm-soc/for-5.7/defconfig' of https://github.com/Broadcom/stblinux: ARM: bcm2835_defconfig: add support for Raspberry Pi4 Link: https://lore.kernel.org/r/20200311212012.9418-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'oxnas-arm-soc-dt-fixes-for-5.6' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/narmstrong/linux-oxnas into arm/fixes - interrupt controller mask init fix to avoid spurious irq after soft reset * tag 'oxnas-arm-soc-dt-fixes-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/narmstrong/linux-oxnas: ARM: dts: oxnas: Fix clear-mask property Link: https://lore.kernel.org/r/1cc83d6b-78de-9160-59bf-77cfe726a365@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'arm-soc/for-5.6/devicetree-fixes-part2' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.6, please pull the following: - Nick fixes the missing pinctrl-names property for the Raspberry Pi Zero Wireless DTS - Nicolas fixes the VC4 firmware node dma-range property which does not have the limitations of the soc's bus node * tag 'arm-soc/for-5.6/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux: ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations ARM: bcm2835-rpi-zero-w: Add missing pinctrl name Link: https://lore.kernel.org/r/20200323025246.22713-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'omap-for-v5.6/fixes-rc6-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Few more fixes for omaps Just few dts fixes: - A fix droid4 touchscreen stopping working with lost gpio interrupts - Also limit omap5 dma range similar to what we've recently done for dra7 * tag 'omap-for-v5.6/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap5: Add bus_dma_limit for L3 bus ARM: dts: omap4-droid4: Fix lost touchscreen interrupts ARM: dts: dra7: Add bus_dma_limit for L3 bus ARM: dts: N900: fix onenand timings ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode Link: https://lore.kernel.org/r/pull-1584575254-461940@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25ARM: dts: exynos: Fix regulator node aliasing on Midas-based boardsMarek Szyprowski
Commit d4ec0cb05064 ("ARM: dts: exynos: Add support for the touch-sensitive buttons on Midas family") added a new fixed regulator ("voltage-regulator-6") to base "midas" .dtsi, but it didn't update the clients of that .dtsi, which define their own fixed regulators starting from the "voltage-regulator-6". This results in aliasing of the regulator dt nodes and breaks operation of OLED panel due to lack of power supply. Fix this by increasing the numbers in the fixed regulator names for those boards. Link: https://lore.kernel.org/r/20200316173710.3144-1-krzk@kernel.org Fixes: d4ec0cb05064 ("ARM: dts: exynos: Add support for the touch-sensitive buttons on Midas family") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'imx-fixes-5.6-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.6, round 2: - Fix minimum voltage setting of vdd_arm and vdd_soc on i.MX6 phycore-som board. * tag 'imx-fixes-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6: phycore-som: fix arm and soc minimum voltage Link: https://lore.kernel.org/r/20200316032555.GD17221@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'sunxi-fixes-for-5.6-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Allwinner Fixes for 5.6 - part 2 This follows up on the previous 5.6 fixes tag with a fix for the A33 Security System (crypto offloading hardware). The hardware was found to not be compatible with existing hardware and a new compatible was needed. The driver change was picked up right before the previous -rc6 and the DT bindings and DT changes were not picked up. The goal is to have all the changes in the same release, that is v5.6. * tag 'sunxi-fixes-for-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: a33: add the new SS compatible dt-bindings: crypto: add new compatible for A33 SS Link: https://lore.kernel.org/r/20200313060727.GA23962@wens.csie.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'sunxi-fixes-for-5.6' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Allwinner Fixes for v5.6 A pretty normal set of fixes for v5.6: - Fix reversed macros used for A83T EMAC clock and reset - Fix camera regulator voltage and USB OTG for TBS-A711 - 16-bit / 8-bit mixed read fix for our RSB driver - Fix SPI controller base address for R40 - Reorder device nodes based on base address for R40 * tag 'sunxi-fixes-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: r40: Move SPI device nodes based on address order ARM: dts: sun8i: r40: Fix register base address for SPI2 and SPI3 ARM: dts: sun8i: r40: Move AHCI device node based on address order bus: sunxi-rsb: Return correct data when mixing 16-bit and 8-bit reads ARM: dts: sun8i-a83t-tbs-a711: Fix USB OTG mode detection ARM: dts: sun8i-a83t-tbs-a711: HM5065 doesn't like such a high voltage ARM: dts: sun8i: a83t: Fix incorrect clk and reset macros for EMAC device Link: https://lore.kernel.org/r/20200313055233.GA19649@wens.csie.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'omap-for-v5.7/ti-sysc-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/drivers Driver changes for ti-sysc for v5.7 merge window Driver changes for ti-sysc interconnect target module driver mostly to be able to probe display subsystem (DSS) without platform data: - Rename clk_enable/disable quirks to less confusing pre and post reset quirks - Enable module reset to work with modules with no sysconfig register - Also consider non-existing module register when matching quirks - Don't warn with nested ti-sysc devices - Implement basic SoC revision handling - Detect DSS related devices - Implement DSS reset quirks Note that there is also a DSS driver specific probe fix to allow probing devices configured for interconnect target module data that was agreed to be merged along with the ti-sysc driver changes. And then there also changes to handle RTC, EDMA and PRUSS: - Add module unlock quirk for RTC - Detect EDMA modules - Add support for handling PRUSS * tag 'omap-for-v5.7/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Add support for PRUSS SYSC type dt-bindings: bus: ti-sysc: Add support for PRUSS SYSC type bus: ti-sysc: Detect EDMA and set quirk flags for tptc bus: ti-sysc: Fix wrong offset for display subsystem reset quirk bus: ti-sysc: Implement display subsystem reset quirk bus: ti-sysc: Detect display subsystem related devices bus: ti-sysc: Handle module unlock quirk needed for some RTC bus: ti-sysc: Implement SoC revision handling bus: ti-sysc: Don't warn about legacy property for nested ti-sysc devices bus: ti-sysc: Consider non-existing registers too when matching quirks bus: ti-sysc: Improve reset to work with modules with no sysconfig bus: ti-sysc: Rename clk related quirks to pre_reset and post_reset quirks bus: ti-sysc: Fix 1-wire reset quirk drm/omap: Prepare DSS for probing without legacy platform data Link: https://lore.kernel.org/r/pull-1583511417-919838@atomide.com-3 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25ARM: Use reboot_cpu instead of hardcoding it to 0Qais Yousef
Use `reboot_cpu` variable instead of hardcoding 0 as the reboot cpu in machine_shutdown(). Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <linux@armlinux.org.uk> Link: https://lkml.kernel.org/r/20200323135110.30522-6-qais.yousef@arm.com
2020-03-25ARM: Don't use disable_nonboot_cpus()Qais Yousef
disable_nonboot_cpus() is not safe to use when doing machine_down(), because it relies on freeze_secondary_cpus() which in turn is a suspend/resume related freeze and could abort if the logic detects any pending activities that can prevent finishing the offlining process. Beside disable_nonboot_cpus() is dependent on CONFIG_PM_SLEEP_SMP which is an othogonal config to rely on to ensure this function works correctly. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <linux@armlinux.org.uk> Link: https://lkml.kernel.org/r/20200323135110.30522-5-qais.yousef@arm.com
2020-03-25.gitignore: add SPDX License IdentifierMasahiro Yamada
Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25backlight: corgi: Convert to use GPIO descriptorsLinus Walleij
The code in the Corgi backlight driver can be considerably simplified by moving to GPIO descriptors and lookup tables from the board files instead of passing GPIO numbers using the old API. Make sure to encode inversion semantics for the Akita and Spitz platforms inside the GPIO lookup table and drop the custom inversion semantics from the driver. All in-tree users are converted in this patch. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-24ARM: dts: tango4: Make /serial compatible with ns16550aLubomir Rintel
ralink,rt2880-uart is compatible with ns16550a and all other instances of RT2880 UART nodes include it in the compatible property. Add it also here, to make the binding schema simpler. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Mans Rullgard <mans@mansr.com> Link: https://lore.kernel.org/r/20200320174107.29406-8-lkundrak@v3.sk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24ARM: dts: mmp*: Make the serial ports compatible with xscale-uartLubomir Rintel
XScale serial port driver is perfectly capable of supporting this hardware. A separate compatible string is probably a historical mess. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200320174107.29406-7-lkundrak@v3.sk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24ARM: dts: mmp*: Fix serial port namesLubomir Rintel
A preferred node name for serial ports is "serial": mmp2-olpc-xo-1-75.dt.yaml: uart@d4030000: $nodename:0: 'uart@d4030000' does not match '^serial(@[0-9a-f,]+)*$' ... Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200320174107.29406-6-lkundrak@v3.sk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24ARM: dts: mmp2-brownstone: Don't redeclare phandle referencesLubomir Rintel
Extend the nodes by their phandle references instead of recreating the tree and declaring references of the same names. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200320174107.29406-5-lkundrak@v3.sk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24ARM: dts: pxa*: Make the serial ports compatible with xscale-uartLubomir Rintel
Some drivers that claim to support mrvl,mmp-uart default to a reg-shift of two, some don't. Be explicit to be on a safe side. With that in place, a XScale serial port driver is perfectly capable of supporting the MMP serial port. Add a compatible string. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200320174107.29406-4-lkundrak@v3.sk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24ARM: dts: pxa*: Fix serial port namesLubomir Rintel
There's a preferred node name for serial ports, and it's not "uart": pxa910-dkb.dt.yaml: uart@d4017000: $nodename:0: 'uart@d4017000' does not match '^serial(@[0-9a-f,]+)*$' ... Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200320174107.29406-3-lkundrak@v3.sk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24ARM: dts: pxa*: Don't redeclare phandle referencesLubomir Rintel
Extend the nodes by their phandle references instead of recreating the tree and declaring references of the same names. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200320174107.29406-2-lkundrak@v3.sk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24arm: Remove the ability to set HYP vectors outside of the decompressorMarc Zyngier
Although we have to bounce between HYP and SVC to decompress and relocate the kernel, we don't need to be able to use it in the kernel itself. So let's drop the functionnality. Since the vectors are never changed, there is no need to reset them either, and nobody calls that stub anyway. The last function (SOFT_RESTART) is still present in order to support kexec. Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-03-24arm: Remove GICv3 vgic compatibility macrosMarc Zyngier
We used to use a set of macros to provide support of vgic-v3 to 32bit without duplicating everything. We don't need it anymore, so drop it. Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Will Deacon <will@kernel.org> Acked-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@arm.com>
2020-03-24arm: Remove HYP/Stage-2 page-table supportMarc Zyngier
Remove all traces of Stage-2 and HYP page table support. Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Will Deacon <will@kernel.org> Acked-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@arm.com>
2020-03-24arm: Remove 32bit KVM host supportMarc Zyngier
That's it. Remove all references to KVM itself, and document that although it is no more, the ABI between SVC and HYP still exists. Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Will Deacon <will@kernel.org> Acked-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@arm.com>
2020-03-24arm: Remove KVM from config filesMarc Zyngier
Only one platform is building KVM by default. How crazy! Remove it whilst nobody is watching. Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Will Deacon <will@kernel.org> Acked-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@arm.com>
generated by cgit (git 2.34.1) at 2025-09-16 13:57:15 +0000