summaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2020-01-07powerpc/mpic: constify copied structureJulia Lawall
The mpic_ipi_chip and mpic_irq_ht_chip structures are only copied into other structures, so make them const. The opportunity for this change was found using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1577864614-5543-10-git-send-email-Julia.Lawall@inria.fr
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2020-01-06powerpc/85xx: Get twr_p102x to compile againSebastian Andrzej Siewior
With CONFIG_QUICC_ENGINE enabled and CONFIG_UCC_GETH + CONFIG_SERIAL_QE disabled we have an unused variable (np). The code won't compile with -Werror. Move the np variable to the block where it is actually used. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191219151602.1908411-1-bigeasy@linutronix.de
2020-01-06powerpc/pseries/svm: Allow IOMMU to work in SVMAlexey Kardashevskiy
H_PUT_TCE_INDIRECT uses a shared page to send up to 512 TCE to a hypervisor in a single hypercall. This does not work for secure VMs as the page needs to be shared or the VM should use H_PUT_TCE instead. This disables H_PUT_TCE_INDIRECT by clearing the FW_FEATURE_PUT_TCE_IND feature bit so SVMs will map TCEs using H_PUT_TCE. This is not a part of init_svm() as it is called too late after FW patching is done and may result in a warning like this: [ 3.727716] Firmware features changed after feature patching! [ 3.727965] WARNING: CPU: 0 PID: 1 at (...)arch/powerpc/lib/feature-fixups.c:466 check_features+0xa4/0xc0 Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Tested-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191216041924.42318-5-aik@ozlabs.ru
2020-01-06powerpc/pseries/iommu: Separate FW_FEATURE_MULTITCE to put/stuff featuresAlexey Kardashevskiy
H_PUT_TCE_INDIRECT allows packing up to 512 TCE updates into a single hypercall; H_STUFF_TCE can clear lots in a single hypercall too. However, unlike H_STUFF_TCE (which writes the same TCE to all entries), H_PUT_TCE_INDIRECT uses a 4K page with new TCEs. In a secure VM environment this means sharing a secure VM page with a hypervisor which we would rather avoid. This splits the FW_FEATURE_MULTITCE feature into FW_FEATURE_PUT_TCE_IND and FW_FEATURE_STUFF_TCE. "hcall-multi-tce" in the "/rtas/ibm,hypertas-functions" device tree property sets both; the "multitce=off" kernel command line parameter disables both. This should not cause behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Tested-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191216041924.42318-4-aik@ozlabs.ru
2020-01-06powerpc/pseries: Allow not having ibm, hypertas-functions::hcall-multi-tce ↵Alexey Kardashevskiy
for DDW By default a pseries guest supports a H_PUT_TCE hypercall which maps a single IOMMU page in a DMA window. Additionally the hypervisor may support H_PUT_TCE_INDIRECT/H_STUFF_TCE which update multiple TCEs at once; this is advertised via the device tree /rtas/ibm,hypertas-functions property which Linux converts to FW_FEATURE_MULTITCE. FW_FEATURE_MULTITCE is checked when dma_iommu_ops is used; however the code managing the huge DMA window (DDW) ignores it and calls H_PUT_TCE_INDIRECT even if it is explicitly disabled via the "multitce=off" kernel command line parameter. This adds FW_FEATURE_MULTITCE checking to the DDW code path. This changes tce_build_pSeriesLP to take liobn and page size as the huge window does not have iommu_table descriptor which usually the place to store these numbers. Fixes: 4e8b0cf46b25 ("powerpc/pseries: Add support for dynamic dma windows") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Tested-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191216041924.42318-3-aik@ozlabs.ru
2020-01-06Revert "powerpc/pseries/iommu: Don't use dma_iommu_ops on secure guests"Ram Pai
This reverts commit edea902c1c1efb855f77e041f9daf1abe7a9768a. At the time the change allowed direct DMA ops for secure VMs; however since then we switched on using SWIOTLB backed with IOMMU (direct mapping) and to make this work, we need dma_iommu_ops which handles all cases including TCE mapping I/O pages in the presence of an IOMMU. Fixes: edea902c1c1e ("powerpc/pseries/iommu: Don't use dma_iommu_ops on secure guests") Signed-off-by: Ram Pai <linuxram@us.ibm.com> [aik: added "revert" and "fixes:"] Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Tested-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191216041924.42318-2-aik@ozlabs.ru
2020-01-06powerpc/pseries: Remove redundant select of PPC_DOORBELLMichael Ellerman
Commit d4e58e5928f8 ("powerpc/powernv: Enable POWER8 doorbell IPIs") added a select of PPC_DOORBELL to PPC_PSERIES, but it already had a select of PPC_DOORBELL. One is enough. Reported-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191219125840.32592-1-mpe@ellerman.id.au
2020-01-06powerpc/512x: Use dma_request_chan() instead dma_request_slave_channel()Peter Ujfalusi
dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191217073730.21249-1-peter.ujfalusi@ti.com
2020-01-06powerpc/pci: Remove pcibios_setup_bus_devices()Oliver O'Halloran
With the previous patch applied pcibios_setup_device() will always be run when pcibios_bus_add_device() is called. There are several code paths where pcibios_setup_bus_device() is still called (the PowerPC specific PCI hotplug support is one) so with just the previous patch applied the setup can be run multiple times on a device, once before the device is added to the bus and once after. There's no need to run the setup in the early case any more so just remove it entirely. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191028085424.12006-3-oohall@gmail.com
2020-01-06powerpc/pci: Fix pcibios_setup_device() orderingShawn Anastasio
Move PCI device setup from pcibios_add_device() and pcibios_fixup_bus() to pcibios_bus_add_device(). This ensures that platform-specific DMA and IOMMU setup occurs after the device has been registered in sysfs, which is a requirement for IOMMU group assignment to work This fixes IOMMU group assignment for hotplugged devices on pseries, where the existing behavior results in IOMMU assignment before registration. Thanks to Lukas Wunner <lukas@wunner.de> for the suggestion. Signed-off-by: Shawn Anastasio <shawn@anastas.io> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191028085424.12006-2-oohall@gmail.com
2020-01-06powerpc/powernv/iov: Ensure the pdn for VFs always contains a valid PE numberOliver O'Halloran
On pseries there is a bug with adding hotplugged devices to an IOMMU group. For a number of dumb reasons fixing that bug first requires re-working how VFs are configured on PowerNV. For background, on PowerNV we use the pcibios_sriov_enable() hook to do two things: 1. Create a pci_dn structure for each of the VFs, and 2. Configure the PHB's internal BARs so the MMIO range for each VF maps to a unique PE. Roughly speaking a PE is the hardware counterpart to a Linux IOMMU group since all the devices in a PE share the same IOMMU table. A PE also defines the set of devices that should be isolated in response to a PCI error (i.e. bad DMA, UR/CA, AER events, etc). When isolated all MMIO and DMA traffic to and from devicein the PE is blocked by the root complex until the PE is recovered by the OS. The requirement to block MMIO causes a giant headache because the P8 PHB generally uses a fixed mapping between MMIO addresses and PEs. As a result we need to delay configuring the IOMMU groups for device until after MMIO resources are assigned. For physical devices (i.e. non-VFs) the PE assignment is done in pcibios_setup_bridge() which is called immediately after the MMIO resources for downstream devices (and the bridge's windows) are assigned. For VFs the setup is more complicated because: a) pcibios_setup_bridge() is not called again when VFs are activated, and b) The pci_dev for VFs are created by generic code which runs after pcibios_sriov_enable() is called. The work around for this is a two step process: 1. A fixup in pcibios_add_device() is used to initialised the cached pe_number in pci_dn, then 2. A bus notifier then adds the device to the IOMMU group for the PE specified in pci_dn->pe_number. A side effect fixing the pseries bug mentioned in the first paragraph is moving the fixup out of pcibios_add_device() and into pcibios_bus_add_device(), which is called much later. This results in step 2. failing because pci_dn->pe_number won't be initialised when the bus notifier is run. We can fix this by removing the need for the fixup. The PE for a VF is known before the VF is even scanned so we can initialise pci_dn->pe_number pcibios_sriov_enable() instead. Unfortunately, moving the initialisation causes two problems: 1. We trip the WARN_ON() in the current fixup code, and 2. The EEH core clears pdn->pe_number when recovering a VF and relies on the fixup to correctly re-set it. The only justification for either of these is a comment in eeh_rmv_device() suggesting that pdn->pe_number *must* be set to IODA_INVALID_PE in order for the VF to be scanned. However, this comment appears to have no basis in reality. Both bugs can be fixed by just deleting the code. Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191028085424.12006-1-oohall@gmail.com
2020-01-06powerpc/papr_scm: Update debug messageAneesh Kumar K.V
Resource struct p->res is assigned later. Avoid using %pR before the resource struct is assigned. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191202063855.154321-1-aneesh.kumar@linux.ibm.com
2020-01-06powerpc/44x: Adjust indentation in ibm4xx_denali_fixup_memsizeNathan Chancellor
Clang warns: ../arch/powerpc/boot/4xx.c:231:3: warning: misleading indentation; statement is not part of the previous 'else' [-Wmisleading-indentation] val = SDRAM0_READ(DDR0_42); ^ ../arch/powerpc/boot/4xx.c:227:2: note: previous statement is here else ^ This is because there is a space at the beginning of this line; remove it so that the indentation is consistent according to the Linux kernel coding style and clang no longer warns. Fixes: d23f5099297c ("[POWERPC] 4xx: Adds decoding of 440SPE memory size to boot wrapper library") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://github.com/ClangBuiltLinux/linux/issues/780 Link: https://lore.kernel.org/r/20191209200338.12546-1-natechancellor@gmail.com
2020-01-06powerpc/64: Use {SAVE,REST}_NVGPRS macrosJordan Niethe
In entry_64.S there are places that open code saving and restoring the non-volatile registers. There are already macros for doing this so use them. Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191211023552.16480-1-jniethe5@gmail.com
2020-01-04mm/memory_hotplug: shrink zones when offlining memoryDavid Hildenbrand
We currently try to shrink a single zone when removing memory. We use the zone of the first page of the memory we are removing. If that memmap was never initialized (e.g., memory was never onlined), we will read garbage and can trigger kernel BUGs (due to a stale pointer): BUG: unable to handle page fault for address: 000000000000353d #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.3.0-rc5-next-20190820+ #317 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4 Workqueue: kacpi_hotplug acpi_hotplug_work_fn RIP: 0010:clear_zone_contiguous+0x5/0x10 Code: 48 89 c6 48 89 c3 e8 2a fe ff ff 48 85 c0 75 cf 5b 5d c3 c6 85 fd 05 00 00 01 5b 5d c3 0f 1f 840 RSP: 0018:ffffad2400043c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000200000000 RCX: 0000000000000000 RDX: 0000000000200000 RSI: 0000000000140000 RDI: 0000000000002f40 RBP: 0000000140000000 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000 R13: 0000000000140000 R14: 0000000000002f40 R15: ffff9e3e7aff3680 FS: 0000000000000000(0000) GS:ffff9e3e7bb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000353d CR3: 0000000058610000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __remove_pages+0x4b/0x640 arch_remove_memory+0x63/0x8d try_remove_memory+0xdb/0x130 __remove_memory+0xa/0x11 acpi_memory_device_remove+0x70/0x100 acpi_bus_trim+0x55/0x90 acpi_device_hotplug+0x227/0x3a0 acpi_hotplug_work_fn+0x1a/0x30 process_one_work+0x221/0x550 worker_thread+0x50/0x3b0 kthread+0x105/0x140 ret_from_fork+0x3a/0x50 Modules linked in: CR2: 000000000000353d Instead, shrink the zones when offlining memory or when onlining failed. Introduce and use remove_pfn_range_from_zone(() for that. We now properly shrink the zones, even if we have DIMMs whereby - Some memory blocks fall into no zone (never onlined) - Some memory blocks fall into multiple zones (offlined+re-onlined) - Multiple memory blocks that fall into different zones Drop the zone parameter (with a potential dubious value) from __remove_pages() and __remove_section(). Link: http://lkml.kernel.org/r/20191006085646.5768-6-david@redhat.com Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319] Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: <stable@vger.kernel.org> [5.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-03compat: provide compat_ptr() on all architecturesArnd Bergmann
In order to avoid needless #ifdef CONFIG_COMPAT checks, move the compat_ptr() definition to linux/compat.h where it can be seen by any file regardless of the architecture. Only s390 needs a special definition, this can use the self-#define trick we have elsewhere. Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-12-30powerpc/spinlocks: Include correct header for static keyJason A. Donenfeld
Recently, the spinlock implementation grew a static key optimization, but the jump_label.h header include was left out, leading to build errors: linux/arch/powerpc/include/asm/spinlock.h:44:7: error: implicit declaration of function ‘static_branch_unlikely’ 44 | if (!static_branch_unlikely(&shared_processor)) This commit adds the missing header. mpe: The build break is only seen with CONFIG_JUMP_LABEL=n. Fixes: 656c21d6af5d ("powerpc/shared: Use static key to detect shared processor") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Srikar Dronamraju <srikar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191223133147.129983-1-Jason@zx2c4.com
2019-12-25Merge tag 'v5.5-rc3' into sched/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-23Merge 5.5-rc3 into tty-nextGreg Kroah-Hartman
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-23powerpc/mm: Mark get_slice_psize() & slice_addr_is_low() as notraceMichael Ellerman
These slice routines are called from the SLB miss handler, which can lead to warnings from the IRQ code, because we have not reconciled the IRQ state properly: WARNING: CPU: 72 PID: 30150 at arch/powerpc/kernel/irq.c:258 arch_local_irq_restore.part.0+0xcc/0x100 Modules linked in: CPU: 72 PID: 30150 Comm: ftracetest Not tainted 5.5.0-rc2-gcc9x-g7e0165b2f1a9 #1 NIP: c00000000001d83c LR: c00000000029ab90 CTR: c00000000026cf90 REGS: c0000007eee3b960 TRAP: 0700 Not tainted (5.5.0-rc2-gcc9x-g7e0165b2f1a9) MSR: 8000000000021033 <SF,ME,IR,DR,RI,LE> CR: 22242844 XER: 20000000 CFAR: c00000000001d780 IRQMASK: 0 ... NIP arch_local_irq_restore.part.0+0xcc/0x100 LR trace_graph_entry+0x270/0x340 Call Trace: trace_graph_entry+0x254/0x340 (unreliable) function_graph_enter+0xe4/0x1a0 prepare_ftrace_return+0xa0/0x130 ftrace_graph_caller+0x44/0x94 # (get_slice_psize()) slb_allocate_user+0x7c/0x100 do_slb_fault+0xf8/0x300 instruction_access_slb_common+0x140/0x180 Fixes: 48e7b7695745 ("powerpc/64s/hash: Convert SLB miss handlers to C") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191221121337.4894-1-mpe@ellerman.id.au
2019-12-22Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "PPC: - Fix a bug where we try to do an ultracall on a system without an ultravisor KVM: - Fix uninitialised sysreg accessor - Fix handling of demand-paged device mappings - Stop spamming the console on IMPDEF sysregs - Relax mappings of writable memslots - Assorted cleanups MIPS: - Now orphan, James Hogan is stepping down x86: - MAINTAINERS change, so long Radim and thanks for all the fish - supported CPUID fixes for AMD machines without SPEC_CTRL" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: MAINTAINERS: remove Radim from KVM maintainers MAINTAINERS: Orphan KVM for MIPS kvm: x86: Host feature SSBD doesn't imply guest feature AMD_SSBD kvm: x86: Host feature SSBD doesn't imply guest feature SPEC_CTRL_SSBD KVM: PPC: Book3S HV: Don't do ultravisor calls on systems without ultravisor KVM: arm/arm64: Properly handle faulting of device mappings KVM: arm64: Ensure 'params' is initialised when looking up sys register KVM: arm/arm64: Remove excessive permission check in kvm_arch_prepare_memory_region KVM: arm64: Don't log IMP DEF sysreg traps KVM: arm64: Sanely ratelimit sysreg messages KVM: arm/arm64: vgic: Use wrapper function to lock/unlock all vcpus in kvm_vgic_create() KVM: arm/arm64: vgic: Fix potential double free dist->spis in __kvm_vgic_destroy() KVM: arm/arm64: Get rid of unused arg in cpu_init_hyp_mode()
2019-12-21Merge tag 'powerpc-5.5-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Two weeks worth of accumulated fixes: - A fix for a performance regression seen on PowerVM LPARs using dedicated CPUs, caused by our vcpu_is_preempted() returning true even for idle CPUs. - One of the ultravisor support patches broke KVM on big endian hosts in v5.4. - Our KUAP (Kernel User Access Prevention) code missed allowing access in __clear_user(), which could lead to an oops or erroneous SEGV when triggered via PTRACE_GETREGSET. - Two fixes for the ocxl driver, an open/remove race, and a memory leak in an error path. - A handful of other small fixes. Thanks to: Andrew Donnellan, Christian Zigotzky, Christophe Leroy, Christoph Hellwig, Daniel Axtens, David Hildenbrand, Frederic Barrat, Gautham R. Shenoy, Greg Kurz, Ihor Pasichnyk, Juri Lelli, Marcus Comstedt, Mike Rapoport, Parth Shah, Srikar Dronamraju, Vaidyanathan Srinivasan" * tag 'powerpc-5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Book3S HV: Fix regression on big endian hosts powerpc: Fix __clear_user() with KUAP enabled powerpc/pseries/cmm: fix managed page counts when migrating pages between zones powerpc/8xx: fix bogus __init on mmu_mapin_ram_chunk() ocxl: Fix potential memory leak on context creation powerpc/irq: fix stack overflow verification powerpc: Ensure that swiotlb buffer is allocated from low memory powerpc/shared: Use static key to detect shared processor powerpc/vcpu: Assume dedicated processors as non-preempt ocxl: Fix concurrent AFU open and device removal
2019-12-18tty/serial: Migrate 8250_fsl to use has_sysrqDmitry Safonov
The SUPPORT_SYSRQ ifdeffery is not nice as: - May create misunderstanding about sizeof(struct uart_port) between different objects - Prevents moving functions from serial_core.h - Reduces readability (well, it's ifdeffery - it's hard to follow) In order to remove SUPPORT_SYSRQ, has_sysrq variable has been added. Initialise it in driver's probe and remove ifdeffery. In contrast to 8250/8250_of, legacy_serial on powerpc does fill (struct plat_serial8250_port). The reason is likely that it's done on device_initcall(), not on probe. So, 8250_core is not yet probed. Propagate value from platform_device on 8250 probe - in case powepc legacy driver it's initialized on initcall, in case 8250_of it will be initialized later on of_platform_serial_setup(). Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Dmitry Safonov <dima@arista.com> Link: https://lore.kernel.org/r/20191213000657.931618-6-dima@arista.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18KVM: PPC: Book3S HV: Don't do ultravisor calls on systems without ultravisorPaul Mackerras
Commit 22945688acd4 ("KVM: PPC: Book3S HV: Support reset of secure guest") added a call to uv_svm_terminate, which is an ultravisor call, without any check that the guest is a secure guest or even that the system has an ultravisor. On a system without an ultravisor, the ultracall will degenerate to a hypercall, but since we are not in KVM guest context, the hypercall will get treated as a system call, which could have random effects depending on what happens to be in r0, and could also corrupt the current task's kernel stack. Hence this adds a test for the guest being a secure guest before doing uv_svm_terminate(). Fixes: 22945688acd4 ("KVM: PPC: Book3S HV: Support reset of secure guest") Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2019-12-17KVM: PPC: Book3S HV: Fix regression on big endian hostsMarcus Comstedt
VCPU_CR is the offset of arch.regs.ccr in kvm_vcpu. arch/powerpc/include/asm/kvm_host.h defines arch.regs as a struct pt_regs, and arch/powerpc/include/asm/ptrace.h defines the ccr field of pt_regs as "unsigned long ccr". Since unsigned long is 64 bits, a 64-bit load needs to be used to load it, unless an endianness specific correction offset is added to access the desired subpart. In this case there is no reason to _not_ use a 64 bit load though. Fixes: 6c85b7bc637b ("powerpc/kvm: Use UV_RETURN ucall to return to ultravisor") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Marcus Comstedt <marcus@mc.pp.se> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191215094900.46740-1-marcus@mc.pp.se
2019-12-16powerpc: Fix __clear_user() with KUAP enabledAndrew Donnellan
The KUAP implementation adds calls in clear_user() to enable and disable access to userspace memory. However, it doesn't add these to __clear_user(), which is used in the ptrace regset code. As there's only one direct user of __clear_user() (the regset code), and the time taken to set the AMR for KUAP purposes is going to dominate the cost of a quick access_ok(), there's not much point having a separate path. Rename __clear_user() to __arch_clear_user(), and make __clear_user() just call clear_user(). Reported-by: syzbot+f25ecf4b2982d8c7a640@syzkaller-ppc64.appspotmail.com Reported-by: Daniel Axtens <dja@axtens.net> Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Fixes: de78a9c42a79 ("powerpc: Add a framework for Kernel Userspace Access Protection") Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com> [mpe: Use __arch_clear_user() for the asm version like arm64 & nds32] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191209132221.15328-1-ajd@linux.ibm.com
2019-12-16powerpc/pseries/cmm: fix managed page counts when migrating pages between zonesDavid Hildenbrand
Commit 63341ab03706 (virtio-balloon: fix managed page counts when migrating pages between zones) fixed a long existing BUG in the virtio-balloon driver when pages would get migrated between zones. I did not try to reproduce on powerpc, but looking at the code, the same should apply to powerpc/cmm ever since it started using the balloon compaction infrastructure (luckily just recently). In case we have to migrate a ballon page to a newpage of another zone, the managed page count of both zones is wrong. Paired with memory offlining (which will adjust the managed page count), we can trigger kernel crashes and all kinds of different symptoms. Fix it by properly adjusting the managed page count when migrating if the zone changed. We'll temporarily modify the totalram page count. If this ever becomes a problem, we can fine tune by providing helpers that don't touch the totalram pages (e.g., adjust_zone_managed_page_count()). Fixes: fe030c9b85e6 ("powerpc/pseries/cmm: Implement balloon compaction") Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191216103058.4958-1-david@redhat.com
2019-12-16powerpc/8xx: fix bogus __init on mmu_mapin_ram_chunk()Christophe Leroy
Remove __init qualifier for mmu_mapin_ram_chunk() as it is called by mmu_mark_initmem_nx() and mmu_mark_rodata_ro() which are not __init functions. At the same time, mark it static as it is only used in this file. Reported-by: kbuild test robot <lkp@intel.com> Fixes: a2227a277743 ("powerpc/32: Don't populate page tables for block mapped pages except on the 8xx") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/56648921986a6b3e7315b1fbbf4684f21bd2dea8.1576310997.git.christophe.leroy@c-s.fr
2019-12-14powerpc/irq: fix stack overflow verificationChristophe Leroy
Before commit 0366a1c70b89 ("powerpc/irq: Run softirqs off the top of the irq stack"), check_stack_overflow() was called by do_IRQ(), before switching to the irq stack. In that commit, do_IRQ() was renamed __do_irq(), and is now executing on the irq stack, so check_stack_overflow() has just become almost useless. Move check_stack_overflow() call in do_IRQ() to do the check while still on the current stack. Fixes: 0366a1c70b89 ("powerpc/irq: Run softirqs off the top of the irq stack") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/e033aa8116ab12b7ca9a9c75189ad0741e3b9b5f.1575872340.git.christophe.leroy@c-s.fr
2019-12-13powerpc: Ensure that swiotlb buffer is allocated from low memoryMike Rapoport
Some powerpc platforms (e.g. 85xx) limit DMA-able memory way below 4G. If a system has more physical memory than this limit, the swiotlb buffer is not addressable because it is allocated from memblock using top-down mode. Force memblock to bottom-up mode before calling swiotlb_init() to ensure that the swiotlb buffer is DMA-able. Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191204123524.22919-1-rppt@kernel.org
2019-12-13powerpc/shared: Use static key to detect shared processorSrikar Dronamraju
With the static key shared processor available, is_shared_processor() can return without having to query the lppaca structure. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Phil Auld <pauld@redhat.com> Acked-by: Waiman Long <longman@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191213035036.6913-2-mpe@ellerman.id.au
2019-12-13powerpc/vcpu: Assume dedicated processors as non-preemptSrikar Dronamraju
With commit 247f2f6f3c70 ("sched/core: Don't schedule threads on pre-empted vCPUs"), the scheduler avoids preempted vCPUs to schedule tasks on wakeup. This leads to wrong choice of CPU, which in-turn leads to larger wakeup latencies. Eventually, it leads to performance regression in latency sensitive benchmarks like soltp, schbench etc. On Powerpc, vcpu_is_preempted() only looks at yield_count. If the yield_count is odd, the vCPU is assumed to be preempted. However yield_count is increased whenever the LPAR enters CEDE state (idle). So any CPU that has entered CEDE state is assumed to be preempted. Even if vCPU of dedicated LPAR is preempted/donated, it should have right of first-use since they are supposed to own the vCPU. On a Power9 System with 32 cores: # lscpu Architecture: ppc64le Byte Order: Little Endian CPU(s): 128 On-line CPU(s) list: 0-127 Thread(s) per core: 8 Core(s) per socket: 1 Socket(s): 16 NUMA node(s): 2 Model: 2.2 (pvr 004e 0202) Model name: POWER9 (architected), altivec supported Hypervisor vendor: pHyp Virtualization type: para L1d cache: 32K L1i cache: 32K L2 cache: 512K L3 cache: 10240K NUMA node0 CPU(s): 0-63 NUMA node1 CPU(s): 64-127 # perf stat -a -r 5 ./schbench v5.4 v5.4 + patch Latency percentiles (usec) Latency percentiles (usec) 50.0000th: 45 50.0th: 45 75.0000th: 62 75.0th: 63 90.0000th: 71 90.0th: 74 95.0000th: 77 95.0th: 78 *99.0000th: 91 *99.0th: 82 99.5000th: 707 99.5th: 83 99.9000th: 6920 99.9th: 86 min=0, max=10048 min=0, max=96 Latency percentiles (usec) Latency percentiles (usec) 50.0000th: 45 50.0th: 46 75.0000th: 61 75.0th: 64 90.0000th: 72 90.0th: 75 95.0000th: 79 95.0th: 79 *99.0000th: 691 *99.0th: 83 99.5000th: 3972 99.5th: 85 99.9000th: 8368 99.9th: 91 min=0, max=16606 min=0, max=117 Latency percentiles (usec) Latency percentiles (usec) 50.0000th: 45 50.0th: 46 75.0000th: 61 75.0th: 64 90.0000th: 71 90.0th: 75 95.0000th: 77 95.0th: 79 *99.0000th: 106 *99.0th: 83 99.5000th: 2364 99.5th: 84 99.9000th: 7480 99.9th: 90 min=0, max=10001 min=0, max=95 Latency percentiles (usec) Latency percentiles (usec) 50.0000th: 45 50.0th: 47 75.0000th: 62 75.0th: 65 90.0000th: 72 90.0th: 75 95.0000th: 78 95.0th: 79 *99.0000th: 93 *99.0th: 84 99.5000th: 108 99.5th: 85 99.9000th: 6792 99.9th: 90 min=0, max=17681 min=0, max=117 Latency percentiles (usec) Latency percentiles (usec) 50.0000th: 46 50.0th: 45 75.0000th: 62 75.0th: 64 90.0000th: 73 90.0th: 75 95.0000th: 79 95.0th: 79 *99.0000th: 113 *99.0th: 82 99.5000th: 2724 99.5th: 83 99.9000th: 6184 99.9th: 93 min=0, max=9887 min=0, max=111 Performance counter stats for 'system wide' (5 runs): context-switches 43,373 ( +- 0.40% ) 44,597 ( +- 0.55% ) cpu-migrations 1,211 ( +- 5.04% ) 220 ( +- 6.23% ) page-faults 15,983 ( +- 5.21% ) 15,360 ( +- 3.38% ) Waiman Long suggested using static_keys. Fixes: 247f2f6f3c70 ("sched/core: Don't schedule threads on pre-empted vCPUs") Cc: stable@vger.kernel.org # v4.18+ Reported-by: Parth Shah <parth@linux.ibm.com> Reported-by: Ihor Pasichnyk <Ihor.Pasichnyk@ibm.com> Tested-by: Juri Lelli <juri.lelli@redhat.com> Acked-by: Waiman Long <longman@redhat.com> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Phil Auld <pauld@redhat.com> Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com> Tested-by: Parth Shah <parth@linux.ibm.com> [mpe: Move the key and setting of the key to pseries/setup.c] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191213035036.6913-1-mpe@ellerman.id.au
2019-12-13scripts/sorttable: Rename 'sortextable' to 'sorttable'Shile Zhang
Use a more generic name for additional table sorting usecases, such as the upcoming ORC table sorting feature. This tool is not tied to exception table sorting anymore. No functional changes intended. [ mingo: Rewrote the changelog. ] Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: linux-kbuild@vger.kernel.org Link: https://lkml.kernel.org/r/20191204004633.88660-6-shile.zhang@linux.alibaba.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-10mm/vmalloc: Add empty <asm/vmalloc.h> headers and use them from ↵Ingo Molnar
<linux/vmalloc.h> In the x86 MM code we'd like to untangle various types of historic header dependency spaghetti, but for this we'd need to pass to the generic vmalloc code various vmalloc related defines that customarily come via the <asm/page.h> low level arch header. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-09soc: fsl: move cpm.h from powerpc/include/asm to include/soc/fslRasmus Villemoes
Some drivers, e.g. ucc_uart, need definitions from cpm.h. In order to allow building those drivers for non-ppc based SOCs, move the header to include/soc/fsl. For now, leave a trivial wrapper at the old location so drivers can be updated one by one. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09powerpc/83xx: remove mpc83xx_ipic_and_qe_init_IRQRasmus Villemoes
This is now exactly the same as mpc83xx_ipic_init_IRQ, so just use that directly. Acked-by: Scott Wood <oss@buserror.net> Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: move calls of qe_ic_init out of arch/powerpc/Rasmus Villemoes
Having to call qe_ic_init() from platform-specific code makes it awkward to allow building the QE drivers for ARM. It's also a needless duplication of code, and slightly error-prone: Instead of the caller needing to know the details of whether the QUICC Engine High and QUICC Engine Low are actually the same interrupt (see e.g. the machine_is() in mpc85xx_mds_qeic_init), just let the init function choose the appropriate handlers after it has parsed the DT and figured it out. If the two interrupts are distinct, use separate handlers, otherwise use the handler which first checks the CHIVEC register (for the high priority interrupts), then the CIVEC. All existing callers pass 0 for flags, so continue to do that from the new single caller. Later cleanups will remove that argument from qe_ic_init and simplify the body, as well as make qe_ic_init into a proper init function for an IRQCHIP_DECLARE, eliminating the need to manually look up the fsl,qe-ic node. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: use qe_ic_cascade_{low, high}_mpic also on 83xxRasmus Villemoes
The *_ipic and *_mpic handlers are almost identical - the only difference is that the latter end with an unconditional chip->irq_eoi() call. Since IPIC does not have ->irq_eoi, we can reduce some code duplication by calling irq_eoi conditionally. This is similar to what is already done in mpc8xxx_gpio_irq_cascade(). This leaves the functions slightly misnamed, but that will be fixed in a subsequent patch. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09treewide: Use sizeof_field() macroPankaj Bharadiya
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except at places where these are defined. Later patches will remove the unused definition of FIELD_SIZEOF(). This patch is generated using following script: EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h" git grep -l -e "\bFIELD_SIZEOF\b" | while read file; do if [[ "$file" =~ $EXCLUDE_FILES ]]; then continue fi sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file; done Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David Miller <davem@davemloft.net> # for net
2019-12-08sched/rt, powerpc: Use CONFIG_PREEMPTIONThomas Gleixner
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT. Both PREEMPT and PREEMPT_RT require the same functionality which today depends on CONFIG_PREEMPT. Switch the entry code over to use CONFIG_PREEMPTION. [bigeasy: +Kconfig] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20191024160458.vlnf3wlcyjl2ich7@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-06Merge tag 'powerpc-5.5-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: "A few commits splitting the KASAN instrumented bitops header in three, to match the split of the asm-generic bitops headers. This is needed on powerpc because we use the generic bitops for the non-atomic case only, whereas the existing KASAN instrumented bitops assume all the underlying operations are provided by the arch as arch_foo() versions. Thanks to: Daniel Axtens & Christophe Leroy" * tag 'powerpc-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: docs/core-api: Remove possibly confusing sub-headings from Bit Operations powerpc: support KASAN instrumentation of bitops kasan: support instrumented bitops combined with generic bitops
2019-12-06Merge tag 'powerpc-5.5-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One fix for a regression introduced by our recent rework of cache flushing on memory hotunplug. Like several other arches, our VDSO clock_getres() needed a fix to match the semantics of posix_get_hrtimer_res(). A fix for a boot crash on Power9 LPARs using PCI LSI interrupts. A commit disabling use of the trace_imc PMU (not the core PMU) on Power9 systems, because it can lead to checkstops, until a workaround is developed. A handful of other minor fixes. Thanks to: Aneesh Kumar K.V, Anju T Sudhakar, Ard Biesheuvel, Christophe Leroy, Cédric Le Goater, Madhavan Srinivasan, Vincenzo Frascino" * tag 'powerpc-5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/perf: Disable trace_imc pmu powerpc/powernv: Avoid re-registration of imc debugfs directory powerpc/pmem: Convert to EXPORT_SYMBOL_GPL powerpc/archrandom: fix arch_get_random_seed_int() powerpc: Fix vDSO clock_getres() powerpc/pmem: Fix kernel crash due to wrong range value usage in flush_dcache_range powerpc/xive: Skip ioremap() of ESB pages for LSI interrupts powerpc/kasan: Fix boot failure with RELOCATABLE && FSL_BOOKE
2019-12-05Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: "Most of the rest of MM and various other things. Some Kconfig rework still awaits merges of dependent trees from linux-next. Subsystems affected by this patch series: mm/hotfixes, mm/memcg, mm/vmstat, mm/thp, procfs, sysctl, misc, notifiers, core-kernel, bitops, lib, checkpatch, epoll, binfmt, init, rapidio, uaccess, kcov, ubsan, ipc, bitmap, mm/pagemap" * akpm: (86 commits) mm: remove __ARCH_HAS_4LEVEL_HACK and include/asm-generic/4level-fixup.h um: add support for folded p4d page tables um: remove unused pxx_offset_proc() and addr_pte() functions sparc32: use pgtable-nopud instead of 4level-fixup parisc/hugetlb: use pgtable-nopXd instead of 4level-fixup parisc: use pgtable-nopXd instead of 4level-fixup nds32: use pgtable-nopmd instead of 4level-fixup microblaze: use pgtable-nopmd instead of 4level-fixup m68k: mm: use pgtable-nopXd instead of 4level-fixup m68k: nommu: use pgtable-nopud instead of 4level-fixup c6x: use pgtable-nopud instead of 4level-fixup arm: nommu: use pgtable-nopud instead of 4level-fixup alpha: use pgtable-nopud instead of 4level-fixup gpio: pca953x: tighten up indentation gpio: pca953x: convert to use bitmap API gpio: pca953x: use input from regs structure in pca953x_irq_pending() gpio: pca953x: remove redundant variable and check in IRQ handler lib/bitmap: introduce bitmap_replace() helper lib/test_bitmap: fix comment about this file lib/test_bitmap: move exp1 and exp2 upper for others to use ...
2019-12-05powerpc/perf: Disable trace_imc pmuMadhavan Srinivasan
When a root user or a user with CAP_SYS_ADMIN privilege uses any trace_imc performance monitoring unit events, to monitor application or KVM threads, it may result in a checkstop (System crash). The cause is frequent switching of the "trace/accumulation" mode of the In-Memory Collection hardware (LDBAR). This patch disables the trace_imc PMU unit entirely to avoid triggering the checkstop. A future patch will reenable it at a later stage once a workaround has been developed. Fixes: 012ae244845f ("powerpc/perf: Trace imc PMU functions") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Tested-by: Hariharan T.S. <hari@linux.ibm.com> [mpe: Add pr_info_once() so dmesg shows the PMU has been disabled] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191118034452.9939-1-maddy@linux.vnet.ibm.com
2019-12-05powerpc/powernv: Avoid re-registration of imc debugfs directoryAnju T Sudhakar
export_imc_mode_and_cmd() function which creates the debugfs interface for imc-mode and imc-command, is invoked when each nest pmu units is registered. When the first nest pmu unit is registered, export_imc_mode_and_cmd() creates 'imc' directory under `/debug/powerpc/`. In the subsequent invocations debugfs_create_dir() function returns, since the directory already exists. The recent commit <c33d442328f55> (debugfs: make error message a bit more verbose), throws a warning if we try to invoke `debugfs_create_dir()` with an already existing directory name. Address this warning by making the debugfs directory registration in the opal_imc_counters_probe() function, i.e invoke export_imc_mode_and_cmd() function from the probe function. Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Tested-by: Nageswara R Sastry <nasastry@in.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191127072035.4283-1-anju@linux.vnet.ibm.com
2019-12-04arch: sembuf.h: make uapi asm/sembuf.h self-containedMasahiro Yamada
Userspace cannot compile <asm/sembuf.h> due to some missing type definitions. For example, building it for x86 fails as follows: CC usr/include/asm/sembuf.h.s In file included from <command-line>:32:0: usr/include/asm/sembuf.h:17:20: error: field `sem_perm' has incomplete type struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ ^~~~~~~~ usr/include/asm/sembuf.h:24:2: error: unknown type name `__kernel_time_t' __kernel_time_t sem_otime; /* last semop time */ ^~~~~~~~~~~~~~~ usr/include/asm/sembuf.h:25:2: error: unknown type name `__kernel_ulong_t' __kernel_ulong_t __unused1; ^~~~~~~~~~~~~~~~ usr/include/asm/sembuf.h:26:2: error: unknown type name `__kernel_time_t' __kernel_time_t sem_ctime; /* last change time */ ^~~~~~~~~~~~~~~ usr/include/asm/sembuf.h:27:2: error: unknown type name `__kernel_ulong_t' __kernel_ulong_t __unused2; ^~~~~~~~~~~~~~~~ usr/include/asm/sembuf.h:29:2: error: unknown type name `__kernel_ulong_t' __kernel_ulong_t sem_nsems; /* no. of semaphores in array */ ^~~~~~~~~~~~~~~~ usr/include/asm/sembuf.h:30:2: error: unknown type name `__kernel_ulong_t' __kernel_ulong_t __unused3; ^~~~~~~~~~~~~~~~ usr/include/asm/sembuf.h:31:2: error: unknown type name `__kernel_ulong_t' __kernel_ulong_t __unused4; ^~~~~~~~~~~~~~~~ It is just a matter of missing include directive. Include <asm/ipcbuf.h> to make it self-contained, and add it to the compile-test coverage. Link: http://lkml.kernel.org/r/20191030063855.9989-3-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04arch: msgbuf.h: make uapi asm/msgbuf.h self-containedMasahiro Yamada
Userspace cannot compile <asm/msgbuf.h> due to some missing type definitions. For example, building it for x86 fails as follows: CC usr/include/asm/msgbuf.h.s In file included from usr/include/asm/msgbuf.h:6:0, from <command-line>:32: usr/include/asm-generic/msgbuf.h:25:20: error: field `msg_perm' has incomplete type struct ipc64_perm msg_perm; ^~~~~~~~ usr/include/asm-generic/msgbuf.h:27:2: error: unknown type name `__kernel_time_t' __kernel_time_t msg_stime; /* last msgsnd time */ ^~~~~~~~~~~~~~~ usr/include/asm-generic/msgbuf.h:28:2: error: unknown type name `__kernel_time_t' __kernel_time_t msg_rtime; /* last msgrcv time */ ^~~~~~~~~~~~~~~ usr/include/asm-generic/msgbuf.h:29:2: error: unknown type name `__kernel_time_t' __kernel_time_t msg_ctime; /* last change time */ ^~~~~~~~~~~~~~~ usr/include/asm-generic/msgbuf.h:41:2: error: unknown type name `__kernel_pid_t' __kernel_pid_t msg_lspid; /* pid of last msgsnd */ ^~~~~~~~~~~~~~ usr/include/asm-generic/msgbuf.h:42:2: error: unknown type name `__kernel_pid_t' __kernel_pid_t msg_lrpid; /* last receive pid */ ^~~~~~~~~~~~~~ It is just a matter of missing include directive. Include <asm/ipcbuf.h> to make it self-contained, and add it to the compile-test coverage. Link: http://lkml.kernel.org/r/20191030063855.9989-2-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-05powerpc/pmem: Convert to EXPORT_SYMBOL_GPLAneesh Kumar K.V
All other architecture export this as GPL symbol Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191202064018.155083-1-aneesh.kumar@linux.ibm.com
2019-12-05powerpc/archrandom: fix arch_get_random_seed_int()Ard Biesheuvel
Commit 01c9348c7620ec65 powerpc: Use hardware RNG for arch_get_random_seed_* not arch_get_random_* updated arch_get_random_[int|long]() to be NOPs, and moved the hardware RNG backing to arch_get_random_seed_[int|long]() instead. However, it failed to take into account that arch_get_random_int() was implemented in terms of arch_get_random_long(), and so we ended up with a version of the former that is essentially a NOP as well. Fix this by calling arch_get_random_seed_long() from arch_get_random_seed_int() instead. Fixes: 01c9348c7620ec65 ("powerpc: Use hardware RNG for arch_get_random_seed_* not arch_get_random_*") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191204115015.18015-1-ardb@kernel.org
generated by cgit (git 2.34.1) at 2025-09-07 20:17:04 +0000