| Age | Commit message (Collapse) | Author |
|---|
|
arch/sh/kernel/smp.c:326:5: warning: no previous prototype for 'setup_profiling_timer' [-Wmissing-prototypes]
The function is unconditionally defined in smp.c, but conditionally
declared in <linux/profile.h>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/effa5eecbd2389c6661974e91bb834db210989ea.1715606232.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/boards/of-generic.c:146:20: warning: no previous prototype for 'arch_init_clk_ops' [-Wmissing-prototypes]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/942621553ed82e3331e2e91485b643892d2d08bc.1715606232.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
The G2-to-PCI bridge chip found in SEGA Dreamcast assumes P2 area
relative addresses.
Set the appropriate IOPORT base offset.
Tested-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20240511191614.68561-2-contact@artur-rojek.eu
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
CONFIG_BASE_FULL is equivalent to !CONFIG_BASE_SMALL and is enabled by
default: CONFIG_BASE_SMALL is the special case to take care of.
So, remove CONFIG_BASE_FULL and move the config choice to
CONFIG_BASE_SMALL (which defaults to 'n')
For defconfigs explicitely disabling BASE_FULL, explicitely enable
BASE_SMALL.
For defconfigs explicitely enabling BASE_FULL, drop it as it is the
default.
Signed-off-by: Yoann Congal <yoann.congal@smile.fr>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240505080343.1471198-4-yoann.congal@smile.fr
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
We want to limit the use of page_mapcount() to the places where it is
absolutely necessary.
We're already using folio_mapped in copy_user_highpage() and
copy_to_user_page() for a similar purpose so ... let's also simply use it
for copy_from_user_page().
There is no change for small folios. Likely we won't stumble over many
large folios on sh in that code either way.
Link: https://lkml.kernel.org/r/20240409192301.907377-13-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Richard Chang <richardycc@google.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The per-architecture fbdev code has no dependencies on fbdev and can
be used for any video-related subsystem. Rename the files to 'video'.
Use video-sti.c on parisc as the source file depends on CONFIG_STI_CORE.
On arc, arm, arm64, sh, and um the asm header file is an empty wrapper
around the file in asm-generic. Let Kbuild generate the file. The build
system does this automatically. Only um needs to generate video.h
explicitly, so that it overrides the host architecture's header. The
latter would otherwise interfere with the build.
Further update all includes statements, include guards, and Makefiles.
Also update a few strings and comments to refer to video instead of
fbdev.
v3:
- arc, arm, arm64, sh: generate asm header via build system (Sam,
Helge, Arnd)
- um: rename fb.h to video.h
- fix typo in commit message (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
These are generated files. Prefix them with $(obj)/ instead of $(src)/.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
The 'choice' statement is primarily used to exclusively select one
option, but the 'optional' property allows all entries to be disabled.
This feature is rarely used. In fact, it is only used in arch/sh/Kconfig
because the equivalent outcome can be achieved by inserting one more
entry.
The 'optional' property support will be removed from Kconfig.
This commit replaces the 'optional' property with a dummy option,
CMDLINE_FROM_BOOTLOADER, as seen in some other architectures.
Note:
The 'default CMDLINE_OVERWRITE' statement does not work as intended
in combination with 'optional'. If neither CONFIG_CMDLINE_OVERWRITE
nor CONFIG_CMDLINE_EXTEND is specified in a defconfig file, both of
them are disabled. This is a bug. To maintain the current behavior,
I added CONFIG_CMDLINE_FROM_BOOTLOADER=y to those defconfig files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/boot/compressed/misc.c:110:6: warning: no previous prototype for ‘ftrace_stub’ [-Wmissing-prototypes]
arch/sh/boot/compressed/misc.c:113:6: warning: no previous prototype for ‘arch_ftrace_ops_list_func’ [-Wmissing-prototypes]
arch/sh/boot/compressed/misc.c:123:6: warning: no previous prototype for ‘decompress_kernel’ [-Wmissing-prototypes]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/b7ea770a3bf26fb2a5f59f4bb83072b2526f7134.1713959841.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
Commit 37744feebc086908 ("sh: remove sh5 support") in v5.8 forgot to
remove the sh5 cache handling.
Suggested-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/23e9b3fd0d78e46c9fc1835852ba226aba92c3ca.1713959531.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
This reverts commit cadc4e1a2b4d20d0cc0e81f2c6ba0588775e54e5.
Commit cadc4e1a2b4d ("sh: Handle calling csum_partial with misaligned
data") causes bad checksum calculations on unaligned data. Reverting
it fixes the problem.
# Subtest: checksum
# module: checksum_kunit
1..5
# test_csum_fixed_random_inputs: ASSERTION FAILED at lib/checksum_kunit.c:500
Expected ( u64)result == ( u64)expec, but
( u64)result == 53378 (0xd082)
( u64)expec == 33488 (0x82d0)
# test_csum_fixed_random_inputs: pass:0 fail:1 skip:0 total:1
not ok 1 test_csum_fixed_random_inputs
# test_csum_all_carry_inputs: ASSERTION FAILED at lib/checksum_kunit.c:525
Expected ( u64)result == ( u64)expec, but
( u64)result == 65281 (0xff01)
( u64)expec == 65280 (0xff00)
# test_csum_all_carry_inputs: pass:0 fail:1 skip:0 total:1
not ok 2 test_csum_all_carry_inputs
# test_csum_no_carry_inputs: ASSERTION FAILED at lib/checksum_kunit.c:573
Expected ( u64)result == ( u64)expec, but
( u64)result == 65535 (0xffff)
( u64)expec == 65534 (0xfffe)
# test_csum_no_carry_inputs: pass:0 fail:1 skip:0 total:1
not ok 3 test_csum_no_carry_inputs
# test_ip_fast_csum: pass:1 fail:0 skip:0 total:1
ok 4 test_ip_fast_csum
# test_csum_ipv6_magic: pass:1 fail:0 skip:0 total:1
ok 5 test_csum_ipv6_magic
# checksum: pass:2 fail:3 skip:0 total:5
# Totals: pass:2 fail:3 skip:0 total:5
not ok 22 checksum
Fixes: cadc4e1a2b4d ("sh: Handle calling csum_partial with misaligned data")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20240324231804.841099-1-linux@roeck-us.net
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
The J2 SPI controller bindings never allowed spi-max-frequency property
in the controller node. Neither old spi-bus.txt bindings, nor new DT
schema allows it. Linux driver does not parse that property from
controller node, thus drop it from DTS as incorrect hardware
description. The SPI child device has already the same property with
the same value, so functionality should not be affected.
Cc: Kousik Sanagavarapu <five231003@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: Rob Landley <rob@landley.net>
Link: https://lore.kernel.org/r/20240322064221.25776-1-krzysztof.kozlowski@linaro.org
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20240306211947.97103-2-u.kleine-koenig@pengutronix.de
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/boards/board-sh7785lcr.c:298:13: warning: no previous prototype for ‘init_sh7785lcr_IRQ’ [-Wmissing-prototypes]
There are no users outside this file, so make it static.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/cbe9da98a1106cdab686766e2f23f768399dbdbf.1709579038.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/kernel/cpu/sh4a/setup-sh7757.c:1240:13: warning: no previous prototype for ‘plat_mem_setup’ [-Wmissing-prototypes]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/c9c26472151d16a2ca91f14bccd64af07a6abdd8.1709579038.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/boards/board-sh7757lcr.c:572:13: warning: no previous prototype for 'init_sh7757lcr_IRQ' [-Wmissing-prototypes]
There are no users outside this file, so make it static.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/fba00424b5b0bee0f9b9cbc63d649a86854d202f.1709579038.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/boards/mach-sh03/rtc.c:123:5: warning: no previous prototype for ‘sh03_rtc_settimeofday’ [-Wmissing-prototypes]
There are no users outside this file, so make it static.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/95417f2a3eb1561af7c2ee064efbc3ef3f03dac3.1709579038.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/boards/mach-highlander/pinmux-r7785rp.c:9:13: warning: no previous prototype for ‘highlander_plat_pinmux_setup’ [-Wmissing-prototypes]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/bbbc833d2c5b565122baaf9277ddf4a2f2cadead.1709579038.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
If CONFIG_SH_DSP=y (e.g. se7343_defconfig):
arch/sh/kernel/traps_32.c:572:5: warning: no previous prototype for ‘is_dsp_inst’ [-Wmissing-prototypes]
There are no users outside this file, so make it static.
While at it, convert the dummy for the CONFIG_SH_DSP=n case from a macro
to a static inline function, to increase type-safety.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/8525fe446e7f24649a83b8cd6ca8b736ab746b80.1709579038.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/kernel/cpu/init.c:99:29: warning: no previous prototype for 'l2_cache_init' [-Wmissing-prototypes]
arch/sh/kernel/cpu/sh4a/setup-sh7723.c:422:6: warning: no previous prototype for 'l2_cache_init' [-Wmissing-prototypes]
arch/sh/kernel/cpu/sh4a/setup-sh7724.c:842:6: warning: no previous prototype for 'l2_cache_init' [-Wmissing-prototypes]
arch/sh/mm/cache-j2.c:48:13: warning: no previous prototype for 'j2_cache_init' [-Wmissing-prototypes]
arch/sh/mm/cache-sh2.c:85:13: warning: no previous prototype for 'sh2_cache_init' [-Wmissing-prototypes]
arch/sh/mm/cache-sh2a.c:181:13: warning: no previous prototype for 'sh2a_cache_init' [-Wmissing-prototypes]
arch/sh/mm/cache-sh3.c:90:13: warning: no previous prototype for 'sh3_cache_init' [-Wmissing-prototypes]
arch/sh/mm/cache-sh4.c:384:13: warning: no previous prototype for 'sh4_cache_init' [-Wmissing-prototypes]
arch/sh/mm/cache-shx3.c:18:13: warning: no previous prototype for 'shx3_cache_init' [-Wmissing-prototypes]
arch/sh/mm/flush-sh4.c:106:13: warning: no previous prototype for 'sh4__flush_region_init' [-Wmissing-prototypes]
arch/sh/mm/cache-sh7705.c:190:13: warning: no previous prototype for 'sh7705_cache_init' [-Wmissing-prototypes]
Fix this by moving all cache-related forward declarations to
<asm/cacheflush.h>, and by including the latter where needed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/f47ab87636d16db4c47bebe1bf62650045f61989.1709579038.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
dma_extend(), get_dma_info_by_name(), register_chan_caps(), and
request_dma_bycap() are unused. Remove them, and all related code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/2beb81fdd7592a94329e3c9a6ba56959f6094019.1709326528.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/kernel/dwarf.c:347:19: warning: no previous prototype for 'dwarf_lookup_fde' [-Wmissing-prototypes]
There are no users outside this file, so make it static.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/55e8261a354e8ec4d375754e404c6c1d303af715.1709326528.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
There is no need to cast a kprobe_opcode_t pointer to a kprobe_opcode_t
pointer.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/fc22b990d869fc2005990159d8072ae2774b1396.1709326528.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/kernel/kprobes.c:299:15: warning: no previous prototype for 'trampoline_probe_handler' [-Wmissing-prototypes]
There are no users outside this file, so make it static.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/42f30b7f767ee1293f6e687a605f7d907ae2daa6.1709326528.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/kernel/kprobes.c:52:16: warning: no previous prototype for 'arch_copy_kprobe' [-Wmissing-prototypes]
Although SH kprobes support was only merged in v2.6.28, it missed the
earlier removal of the arch_copy_kprobe() callback in v2.6.15.
Based on the powerpc part of commit 49a2a1b83ba6fa40 ("[PATCH] kprobes:
changed from using spinlock to mutex").
Fixes: d39f5450146ff39f ("sh: Add kprobes support.")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/717d47a19689cc944fae6e981a1ad7cae1642c89.1709326528.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/kernel/smp.c:173:17: warning: no previous prototype for 'start_secondary' [-Wmissing-prototypes]
arch/sh/kernel/smp.c:324:5: warning: no previous prototype for 'setup_profiling_timer' [-Wmissing-prototypes]
Make start_secondary() static, as it is only used in this file.
Include <linux/profile.h> to fix the other warning.
There are no users outside this file, so make it static.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/6b6b9a84b30ee56f57f409a7550c69d4aece5dc3.1709326528.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/kernel/cpu/sh4a/setup-sh7786.c:411:13: warning: no previous prototype for 'sh7786_usb_use_exclock' [-Wmissing-prototypes]
Upstream never had a user of sh7786_usb_use_exclock(), remove it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/a87c6c0edcf81937b8eb2c899d286d82d71ad513.1709326528.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/kernel/cpu/sh2a/opcode_helper.c:34:14: warning: no previous prototype for 'instruction_size' [-Wmissing-prototypes]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/8314dd9a966394dd1fd82d88095c57d9778fcfc9.1709326528.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/drivers/dma/dma-api.c:164:5: warning: no previous prototype for 'dmac_search_free_channel' [-Wmissing-prototypes]
dmac_search_free_channel() never had a user in upstream, remove it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/82d5efdde44f9489c5a7d11d0a19750445116c95.1709326528.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/math-emu/math.c:492:5: warning: no previous prototype for 'do_fpu_inst' [-Wmissing-prototypes]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/cfda1ba2eadb75e2793e67d43df42fe4c04e4fcf.1709326528.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/mm/nommu.c:76:13: warning: no previous prototype for 'kmap_coherent_init' [-Wmissing-prototypes]
arch/sh/mm/nommu.c:80:7: warning: no previous prototype for 'kmap_coherent' [-Wmissing-prototypes]
arch/sh/mm/nommu.c:86:6: warning: no previous prototype for 'kunmap_coherent' [-Wmissing-prototypes]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/d4b2a43fcedddee3d27cfd87ff2e0bf511588aa0.1709326528.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/kernel/ftrace.c:130:6: warning: no previous prototype for ‘arch_ftrace_nmi_enter’ [-Wmissing-prototypes]
arch/sh/kernel/ftrace.c:140:6: warning: no previous prototype for ‘arch_ftrace_nmi_exit’ [-Wmissing-prototypes]
arch/sh/kernel/ftrace.c:316:6: warning: no previous prototype for ‘prepare_ftrace_return’ [-Wmissing-prototypes]
Fix this by moving existing forward declarations to <asm/ftrace.h>, and
adding the missing forward declaration for prepare_ftrace_return().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/910c8846a025e1c3b744a83ddf8e2816a3c5569d.1709326528.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/kernel/hw_breakpoint.c:135:5: warning: no previous prototype for ‘arch_bp_generic_fields’ [-Wmissing-prototypes]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/566af354bf51ddc38e9eb95eac51ec00c4e42024.1709326528.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/kernel/traps_32.c:735:6: warning: no previous prototype for ‘per_cpu_trap_init’ [-Wmissing-prototypes]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/a7750e57cc077ca6e27d0b9bd6b123d42894bc17.1709326528.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/kernel/return_address.c:49:7: warning: no previous prototype for ‘return_address’ [-Wmissing-prototypes]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/45685f62c9132aca5dc3c028471218393b51f34c.1709326528.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/mm/tlbex_32.c:22:1: warning: no previous prototype for ‘handle_tlbmiss’ [-Wmissing-prototypes]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/23ec2c88168bd5b7e294828221531eed2f3eede8.1709326528.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/kernel/sys_sh.c:58:16: warning: no previous prototype for ‘sys_cacheflush’ [-Wmissing-prototypes]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/b1c218986fb77d78303626b43c97925809045018.1709326528.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/kernel/cpu/sh4/fpu.c:389:6: warning: no previous prototype for ‘float_raise’ [-Wmissing-prototypes]
arch/sh/kernel/cpu/sh4/fpu.c:394:5: warning: no previous prototype for ‘float_rounding_mode’ [-Wmissing-prototypes]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/1847145fc2181313b78bea8a81e6f0269d765968.1709326528.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/mm/pgtable.c:12:6: warning: no previous prototype for 'pgd_ctor' [-Wmissing-prototypes]
arch/sh/mm/pgtable.c:34:8: warning: no previous prototype for 'pgd_alloc' [-Wmissing-prototypes]
arch/sh/mm/pgtable.c:39:6: warning: no previous prototype for 'pgd_free' [-Wmissing-prototypes]
arch/sh/mm/pgtable.c:45:6: warning: no previous prototype for 'pud_populate' [-Wmissing-prototypes]
arch/sh/mm/pgtable.c:50:8: warning: no previous prototype for 'pmd_alloc_one' [-Wmissing-prototypes]
arch/sh/mm/pgtable.c:55:6: warning: no previous prototype for 'pmd_free' [-Wmissing-prototypes]
Make pgd_ctor() static, as it is only used in this file.
Include <asm/pgalloc.h> to fix the other warnings.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/aa1328ea3327d6685aab76d5787cb77c996052c0.1709326528.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
Nowadays, we call it "GUP-fast", the external interface includes functions
like "get_user_pages_fast()", and we renamed all internal functions to
reflect that as well.
Let's make the config option reflect that.
Link: https://lkml.kernel.org/r/20240402125516.223131-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Future changes will need to add a new member to struct
vm_unmapped_area_info. This would cause trouble for any call site that
doesn't initialize the struct. Currently every caller sets each member
manually, so if new ones are added they will be uninitialized and the core
code parsing the struct will see garbage in the new member.
It could be possible to initialize the new member manually to 0 at each
call site. This and a couple other options were discussed. Having some
struct vm_unmapped_area_info instances not zero initialized will put those
sites at risk of feeding garbage into vm_unmapped_area(), if the
convention is to zero initialize the struct and any new field addition
missed a call site that initializes each field manually. So it is useful
to do things similar across the kernel.
The consensus (see links) was that in general the best way to accomplish
taking into account both code cleanliness and minimizing the chance of
introducing bugs, was to do C99 static initialization. As in: struct
vm_unmapped_area_info info = {};
With this method of initialization, the whole struct will be zero
initialized, and any statements setting fields to zero will be unneeded.
The change should not leave cleanup at the call sides.
While iterating though the possible solutions a few archs kindly acked
other variations that still zero initialized the struct. These sites have
been modified in previous changes using the pattern acked by the
respective arch.
So to be reduce the chance of bugs via uninitialized fields, perform a
tree wide change using the consensus for the best general way to do this
change. Use C99 static initializing to zero the struct and remove and
statements that simply set members to zero.
Link: https://lkml.kernel.org/r/20240326021656.202649-11-rick.p.edgecombe@intel.com
Link: https://lore.kernel.org/lkml/202402280912.33AEE7A9CF@keescook/#t
Link: https://lore.kernel.org/lkml/j7bfvig3gew3qruouxrh7z7ehjjafrgkbcmg6tcghhfh3rhmzi@wzlcoecgy5rs/
Link: https://lore.kernel.org/lkml/ec3e377a-c0a0-4dd3-9cb9-96517e54d17e@csgroup.eu/
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Deepak Gupta <debug@rivosinc.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: H. Peter Anvin (Intel) <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All implementations that aren't no-ops just set a bit in the flags, and we
want to use the folio flags rather than the page flags for that. Rename
it to arch_clear_hugetlb_flags() while we're touching it so nobody thinks
it's used for THP.
[willy@infradead.org: fix arm64 build]
Link: https://lkml.kernel.org/r/ZgQvNKGdlDkwhQEX@casper.infradead.org
Link: https://lkml.kernel.org/r/20240326171045.410737-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Various page->flags cleanups".
The first two patches are bug fixes, although I'm not sure that either
architecture will have noticed. There aren't a lot of uses of page->flags
left! The big build-up here is to reworking stable_page_flags(), which
will definitely be a user-visible change. I think a welcome one, given
the special case we had to spread the Slab flag into all tail pages.
This patch (of 10):
Since switching to the new page table range API, we do not set the
PG_arch_1 (aka dcache clean) flag on tail pages, only on the folio. Test
it on the folio. Also use page_mapped() instead of page_mapcount() as it
is more efficient.
[akpm@linux-foundation.org: fix folio_flags call]
Link: https://lkml.kernel.org/r/20240326171045.410737-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20240326171045.410737-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This API is not used anymore, drop it for the whole tree.
Link: https://lkml.kernel.org/r/20240318200404.448346-13-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Mark Salter <msalter@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"Two patches by Ricardo B. Marliere make two instances of struct
bus_type in the interrupt controller driver and the DMA sysfs
interface const since the driver core in the kernel is now able to
handle that.
A third patch by Artur Rojek enforces internal linkage for the
function setup_hd64461() in order to fix the build of hp6xx_defconfig
with -Werror=missing-prototypes"
* tag 'sh-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: hd64461: Make setup_hd64461() static
sh: intc: Make intc_subsys const
sh: dma-sysfs: Make dma_subsys const
|
|
Enforce internal linkage for setup_hd64461().
This fixes the following error:
arch/sh/cchips/hd6446x/hd64461.c:75:12: error: no previous prototype for 'setup_hd64461' [-Werror=missing-prototypes]
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20240211193451.106795-1-contact@artur-rojek.eu
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As is pretty normal for this tree, there are changes all over the
place, especially for small fixes, selftest improvements, and improved
macro usability.
Some header changes ended up landing via this tree as they depended on
the string header cleanups. Also, a notable set of changes is the work
for the reintroduction of the UBSAN signed integer overflow sanitizer
so that we can continue to make improvements on the compiler side to
make this sanitizer a more viable future security hardening option.
Summary:
- string.h and related header cleanups (Tanzir Hasan, Andy
Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev,
Harshit Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure
(Michael Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob
Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer"
* tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (51 commits)
selftests/powerpc: Fix load_unaligned_zeropad build failure
string: Convert helpers selftest to KUnit
string: Convert selftest to KUnit
sh: Fix build with CONFIG_UBSAN=y
compiler.h: Explain how __is_constexpr() works
overflow: Allow non-type arg to type_max() and type_min()
VMCI: Fix possible memcpy() run-time warning in vmci_datagram_invoke_guest_handler()
lib/string_helpers: Add flags param to string_get_size()
x86, relocs: Ignore relocations in .notes section
objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks
overflow: Use POD in check_shl_overflow()
lib: stackinit: Adjust target string to 8 bytes for m68k
sparc: vdso: Disable UBSAN instrumentation
kernel.h: Move lib/cmdline.c prototypes to string.h
leaking_addresses: Provide mechanism to scan binary files
leaking_addresses: Ignore input device status lines
leaking_addresses: Use File::Temp for /tmp files
MAINTAINERS: Update LEAKING_ADDRESSES details
fortify: Improve buffer overflow reporting
fortify: Add KUnit tests for runtime overflows
...
|
|
These four architectures define the same Kconfig symbols for configuring
the page size. Move the logic into a common place where it can be shared
with all other architectures.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The early boot stub for sh had UBSan instrumentation present where it is
not supported. Disable it for this part of the build.
sh4-linux-ld: arch/sh/boot/compressed/misc.o: in function `zlib_inflate_table':
misc.c:(.text+0x670): undefined reference to `__ubsan_handle_shift_out_of_bounds'
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401310416.s8HLiLnC-lkp@intel.com/
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nicolas Schier <n.schier@avm.de>
Cc: <linux-sh@vger.kernel.org>
Link: https://lore.kernel.org/r/20240130232717.work.088-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
