| Age | Commit message (Collapse) | Author |
|---|
|
The RISC-V BPF uses a5 for BPF return values, which are zero-extended,
whereas the RISC-V ABI uses a0 which is sign-extended. In other words,
a5 and a0 can differ, and are used in different context.
The BPF trampoline are used for both BPF programs, and regular kernel
functions.
Make sure that the RISC-V BPF trampoline saves, and restores both a0
and a5.
Fixes: 49b5e77ae3e2 ("riscv, bpf: Add bpf trampoline support for RV64")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231004120706.52848-3-bjorn@kernel.org
|
|
The RISC-V architecture does not expose sub-registers, and hold all
32-bit values in a sign-extended format [1] [2]:
| The compiler and calling convention maintain an invariant that all
| 32-bit values are held in a sign-extended format in 64-bit
| registers. Even 32-bit unsigned integers extend bit 31 into bits
| 63 through 32. Consequently, conversion between unsigned and
| signed 32-bit integers is a no-op, as is conversion from a signed
| 32-bit integer to a signed 64-bit integer.
While BPF, on the other hand, exposes sub-registers, and use
zero-extension (similar to arm64/x86).
This has led to some subtle bugs, where a BPF JITted program has not
sign-extended the a0 register (return value in RISC-V land), passed
the return value up the kernel, e.g.:
| int from_bpf(void);
|
| long foo(void)
| {
| return from_bpf();
| }
Here, a0 would be 0xffff_ffff, instead of the expected
0xffff_ffff_ffff_ffff.
Internally, the RISC-V JIT uses a5 as a dedicated register for BPF
return values.
Keep a5 zero-extended, but explicitly sign-extend a0 (which is used
outside BPF land). Now that a0 (RISC-V ABI) and a5 (BPF ABI) differs,
a0 is only moved to a5 for non-BPF native calls (BPF_PSEUDO_CALL).
Fixes: 2353ecc6f91f ("bpf, riscv: add BPF JIT for RV64G")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://github.com/riscv/riscv-isa-manual/releases/download/riscv-isa-release-056b6ff-2023-10-02/unpriv-isa-asciidoc.pdf # [2]
Link: https://github.com/riscv-non-isa/riscv-elf-psabi-doc/releases/download/draft-20230929-e5c800e661a53efe3c2678d71a306323b60eb13b/riscv-abi.pdf # [2]
Link: https://lore.kernel.org/bpf/20231004120706.52848-2-bjorn@kernel.org
|
|
Commit 45201c879469 ("powerpc/nohash: Remove hash related code from
nohash headers.") replaced:
if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0)
return 0;
By:
if (pte_young(*ptep))
return 0;
But it should be:
if (!pte_young(*ptep))
return 0;
Fix it.
Fixes: 45201c879469 ("powerpc/nohash: Remove hash related code from nohash headers.")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/8bb7f06494e21adada724ede47a4c3d97e879d40.1695659959.git.christophe.leroy@csgroup.eu
|
|
On 8xx, PAGE_NONE is handled by setting _PAGE_NA instead of clearing
_PAGE_USER.
But then pte_user() returns 1 also for PAGE_NONE.
As _PAGE_NA prevent reads, add a specific version of pte_read()
that returns 0 when _PAGE_NA is set instead of always returning 1.
Fixes: 351750331fc1 ("powerpc/mm: Introduce _PAGE_NA")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/57bcfbe578e43123f9ed73e040229b80f1ad56ec.1695659959.git.christophe.leroy@csgroup.eu
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix SEV-SNP guest crashes that may happen on NMIs
- Fix a potential SEV platform memory setup overflow
* tag 'x86-urgent-2023-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Change npages to unsigned long in snp_accept_memory()
x86/sev: Use the GHCB protocol when available for SNP CPUID requests
|
|
We found that a panic can occur when a vsyscall is made while LBR sampling
is active. If the vsyscall is interrupted (NMI) for perf sampling, this
call sequence can occur (most recent at top):
__insn_get_emulate_prefix()
insn_get_emulate_prefix()
insn_get_prefixes()
insn_get_opcode()
decode_branch_type()
get_branch_type()
intel_pmu_lbr_filter()
intel_pmu_handle_irq()
perf_event_nmi_handler()
Within __insn_get_emulate_prefix() at frame 0, a macro is called:
peek_nbyte_next(insn_byte_t, insn, i)
Within this macro, this dereference occurs:
(insn)->next_byte
Inspecting registers at this point, the value of the next_byte field is the
address of the vsyscall made, for example the location of the vsyscall
version of gettimeofday() at 0xffffffffff600000. The access to an address
in the vsyscall region will trigger an oops due to an unhandled page fault.
To fix the bug, filtering for vsyscalls can be done when
determining the branch type. This patch will return
a "none" branch if a kernel address if found to lie in the
vsyscall region.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
|
|
The kernel test robot reported kernel-doc warnings here:
monitor.c:34: warning: Cannot understand * @rmid_free_lru A least recently used list of free RMIDs on line 34 - I thought it was a doc line
monitor.c:41: warning: Cannot understand * @rmid_limbo_count count of currently unused but (potentially) on line 41 - I thought it was a doc line
monitor.c:50: warning: Cannot understand * @rmid_entry - The entry in the limbo and free lists. on line 50 - I thought it was a doc line
We don't have a syntax for documenting individual data items via
kernel-doc, so remove the "/**" kernel-doc markers and add a hyphen
for consistency.
Fixes: 6a445edce657 ("x86/intel_rdt/cqm: Add RDT monitoring initialization")
Fixes: 24247aeeabe9 ("x86/intel_rdt/cqm: Improve limbo list processing")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231006235132.16227-1-rdunlap@infradead.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- fix random faults in mmap'd memory on pre PA8800 processors
- fix boot crash with nr_cpus=1 on kernel command line
* tag 'parisc-for-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Restore __ldcw_align for PA-RISC 2.0 processors
parisc: Fix crash with nr_cpus=1 option
|
|
Back in 2005, Kyle McMartin removed the 16-byte alignment for
ldcw semaphores on PA 2.0 machines (CONFIG_PA20). This broke
spinlocks on pre PA8800 processors. The main symptom was random
faults in mmap'd memory (e.g., gcc compilations, etc).
Unfortunately, the errata for this ldcw change is lost.
The issue is the 16-byte alignment required for ldcw semaphore
instructions can only be reduced to natural alignment when the
ldcw operation can be handled coherently in cache. Only PA8800
and PA8900 processors actually support doing the operation in
cache.
Aligning the spinlock dynamically adds two integer instructions
to each spinlock.
Tested on rp3440, c8000 and a500.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Link: https://lore.kernel.org/linux-parisc/6b332788-2227-127f-ba6d-55e99ecf4ed8@bell.net/T/#t
Link: https://lore.kernel.org/linux-parisc/20050609050702.GB4641@roadwarrior.mcmartin.ca/
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
John David Anglin reported that giving "nr_cpus=1" on the command
line causes a crash, while "maxcpus=1" works.
Reported-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.18+
|
|
Fix kernel-doc warnings reported by the kernel test robot:
timer32k.c:186: warning: cannot understand function prototype: 'struct timespec64 persistent_ts; '
timer32k.c:191: warning: Function parameter or member 'ts' not described in 'omap_read_persistent_clock64'
timer32k.c:216: warning: Function parameter or member 'vbase' not described in 'omap_init_clocksource_32k'
timer32k.c:216: warning: Excess function parameter 'pbase' description in 'omap_init_clocksource_32k'
timer32k.c:216: warning: Excess function parameter 'size' description in 'omap_init_clocksource_32k'
timer32k.c:216: warning: No description found for return value of 'omap_init_clocksource_32k'
Fixes: a451570c008b ("ARM: OMAP: 32k counter: Provide y2038-safe omap_read_persistent_clock() replacement")
Fixes: 1fe97c8f6a1d ("ARM: OMAP: Make OMAP clocksource source selection using kernel param")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/all/202310070106.8QSyJOm3-lkp@intel.com/
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Xunlei Pang <pang.xunlei@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: linux-omap@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Message-ID: <20231007001603.24972-1-rdunlap@infradead.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The %pR format string takes a pointer to struct resource, but this is
passing a pointer to a pointer which it will print wrong information.
Fixes: c63f5b454885 ("ARM: omap2: Use of_range_to_resource() for "ranges" parsing")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <c126dc33-233a-4776-806f-9dff0e73a181@moroto.mountain>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We used to determine the number of page table entries to set for a NAPOT
hugepage by using the pte value which actually fails when the pte to set
is a swap entry.
So take advantage of a recent fix for arm64 reported in [1] which
introduces the size of the mapping as an argument of set_huge_pte_at(): we
can then use this size to compute the number of page table entries to set
for a NAPOT region.
Link: https://lkml.kernel.org/r/20230928151846.8229-3-alexghiti@rivosinc.com
Fixes: 82a1a1f3bfb6 ("riscv: mm: support Svnapot in hugetlb page")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Closes: https://lore.kernel.org/linux-arm-kernel/20230922115804.2043771-1-ryan.roberts@arm.com/ [1]
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Qinglin Pan <panqinglin2020@iscas.ac.cn>
Cc: Conor Dooley <conor@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Fix set_huge_pte_at()".
A recent report [1] from Ryan for arm64 revealed that we do not handle
swap entries when setting a hugepage backed by a NAPOT region (the contpte
riscv equivalent).
As explained in [1], the issue was discovered by a new test in kselftest
which uses poison entries, but the symptoms are different from arm64 though:
- the riscv kernel bugs because we do not handle VM_FAULT_HWPOISON*,
this is fixed by patch 1,
- after that, the test passes because the first pte_napot() fails (the
poison entry does not have the N bit set), and then we only set the
first page table entry covering the NAPOT hugepage, which is enough
for hugetlb_fault() to correctly raise a VM_FAULT_HWPOISON wherever we
write in this mapping since only this first page table entry is
checked
(see https://elixir.bootlin.com/linux/v6.6-rc3/source/mm/hugetlb.c#L6071).
But this seems fragile so patch 2 sets all page table entries of a
NAPOT mapping.
[1]: https://lore.kernel.org/linux-arm-kernel/20230922115804.2043771-1-ryan.roberts@arm.com/
This patch (of 2):
We used to panic when such faults were encountered but we should handle
those faults gracefully for userspace by sending a SIGBUS to the process,
like most architectures do.
Link: https://lkml.kernel.org/r/20230928151846.8229-1-alexghiti@rivosinc.com
Link: https://lkml.kernel.org/r/20230928151846.8229-2-alexghiti@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Conor Dooley <conor@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Qinglin Pan <panqinglin2020@iscas.ac.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The DSU PMU allows monitoring performance events in the DSU cluster,
which is done by configuring and reading back values from the DSU PMU
system registers. However, for write-access to be allowed by ELs lower
than EL3, the EL3 firmware needs to update the setting on the ACTLR3_EL3
register, as it is disallowed by default.
That configuration is not done on the firmware used by the MT8195 SoC,
as a consequence, booting a MT8195-based machine like
mt8195-cherry-tomato-r2 with CONFIG_ARM_DSU_PMU enabled hangs the kernel
just as it writes to the CLUSTERPMOVSCLR_EL1 register, since the
instruction faults to EL3, and BL31 apparently just re-runs the
instruction over and over.
Mark the DSU PMU node in the Devicetree with status "fail", as the
machine doesn't have a suitable firmware to make use of it from the
kernel, and allowing its driver to probe would hang the kernel.
Fixes: 37f2582883be ("arm64: dts: Add mediatek SoC mt8195 and evaluation board")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230720200753.322133-1-nfraprado@collabora.com
Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-5-dad7cd62a8ff@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
dtbs_check throws a warning at t-phy nodes:
Warning (unit_address_vs_reg): /t-phy@1a243000: node has a unit name, but no reg or ranges property
Warning (unit_address_vs_reg): /soc/t-phy@11c00000: node has a unit name, but no reg or ranges property
The ranges is empty thus removing the `@1a243000`, `@11c00000` from
the node name.
Fixes: 6029cae696c8 ("arm64: dts: mediatek: mt7622: harmonize node names and compatibles")
Fixes: 918aed7abd2d ("arm64: dts: mt7986: add pcie related device nodes")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230814093931.9298-2-eugen.hristev@collabora.com
Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-4-dad7cd62a8ff@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The dts file of the MediaTek MT8195 demo board has been updated to include
new reserved memory regions.
These reserved memory regions are:
- SCP
- VPU,
- Sound DMA
- APU.
These regions are defined with the "shared-dma-pool" compatible property.
In addition, the existing reserved memory regions have been reordered by
their addresses to improve readability and maintainability of the DTS
file.
Cc: stable@vger.kernel.org # 6.1, 6.4, 6.5
Fixes: e4a417520101 ("arm64: dts: mediatek: mt8195-demo: fix the memory size of node secmon")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230905034511.11232-2-macpaul.lin@mediatek.com
Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-3-dad7cd62a8ff@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The onboard dram of mt8195-demo board is 8GB.
Cc: stable@vger.kernel.org # 6.1, 6.4, 6.5
Fixes: 6147314aeedc ("arm64: dts: mediatek: Add device-tree for MT8195 Demo board")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230905034511.11232-1-macpaul.lin@mediatek.com
Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-2-dad7cd62a8ff@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"A typo fix for a PMU driver, a workround for a side-channel erratum on
Cortex-A520 and a fix for the local timer save/restore when using ACPI
with Qualcomm's custom CPUs:
- Workaround for Cortex-A520 erratum #2966298
- Fix typo in Arm CMN PMU driver that breaks counter overflow handling
- Fix timer handling across idle for Qualcomm custom CPUs"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
cpuidle, ACPI: Evaluate LPI arch_flags for broadcast timer
arm64: errata: Add Cortex-A520 speculative unprivileged load workaround
arm64: Add Cortex-A520 CPU part definition
perf/arm-cmn: Fix the unhandled overflow status of counter 4 to 7
|
|
imx93 A0 chip use the internal q-channel handshake signal in LPCG
and CCM to automatically handle the Flex-CAN stop mode. But this
method meet issue when do the system PM stress test. IC can't fix
it easily. So in the new imx93 A1 chip, IC drop this method, and
involve back the old way，use the GPR method to trigger the Flex-CAN
stop mode signal. Now NXP claim to drop imx93 A0, and only support
imx93 A1. So here add the stop mode through GPR.
This patch also fix a typo for aonmix_ns_gpr.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/all/20230726112458.3524165-1-haibo.chen@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, netfilter, BPF and WiFi.
I didn't collect precise data but feels like we've got a lot of 6.5
fixes here. WiFi fixes are most user-awaited.
Current release - regressions:
- Bluetooth: fix hci_link_tx_to RCU lock usage
Current release - new code bugs:
- bpf: mprog: fix maximum program check on mprog attachment
- eth: ti: icssg-prueth: fix signedness bug in prueth_init_tx_chns()
Previous releases - regressions:
- ipv6: tcp: add a missing nf_reset_ct() in 3WHS handling
- vringh: don't use vringh_kiov_advance() in vringh_iov_xfer(), it
doesn't handle zero length like we expected
- wifi:
- cfg80211: fix cqm_config access race, fix crashes with brcmfmac
- iwlwifi: mvm: handle PS changes in vif_cfg_changed
- mac80211: fix mesh id corruption on 32 bit systems
- mt76: mt76x02: fix MT76x0 external LNA gain handling
- Bluetooth: fix handling of HCI_QUIRK_STRICT_DUPLICATE_FILTER
- l2tp: fix handling of transhdrlen in __ip{,6}_append_data()
- dsa: mv88e6xxx: avoid EEPROM timeout when EEPROM is absent
- eth: stmmac: fix the incorrect parameter after refactoring
Previous releases - always broken:
- net: replace calls to sock->ops->connect() with kernel_connect(),
prevent address rewrite in kernel_bind(); otherwise BPF hooks may
modify arguments, unexpectedly to the caller
- tcp: fix delayed ACKs when reads and writes align with MSS
- bpf:
- verifier: unconditionally reset backtrack_state masks on global
func exit
- s390: let arch_prepare_bpf_trampoline return program size, fix
struct_ops offsets
- sockmap: fix accounting of available bytes in presence of PEEKs
- sockmap: reject sk_msg egress redirects to non-TCP sockets
- ipv4/fib: send netlink notify when delete source address routes
- ethtool: plca: fix width of reads when parsing netlink commands
- netfilter: nft_payload: rebuild vlan header on h_proto access
- Bluetooth: hci_codec: fix leaking memory of local_codecs
- eth: intel: ice: always add legacy 32byte RXDID in supported_rxdids
- eth: stmmac:
- dwmac-stm32: fix resume on STM32 MCU
- remove buggy and unneeded stmmac_poll_controller, depend on NAPI
- ibmveth: always recompute TCP pseudo-header checksum, fix use of
the driver with Open vSwitch
- wifi:
- rtw88: rtw8723d: fix MAC address offset in EEPROM
- mt76: fix lock dependency problem for wed_lock
- mwifiex: sanity check data reported by the device
- iwlwifi: ensure ack flag is properly cleared
- iwlwifi: mvm: fix a memory corruption due to bad pointer arithm
- iwlwifi: mvm: fix incorrect usage of scan API
Misc:
- wifi: mac80211: work around Cisco AP 9115 VHT MPDU length"
* tag 'net-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
MAINTAINERS: update Matthieu's email address
mptcp: userspace pm allow creating id 0 subflow
mptcp: fix delegated action races
net: stmmac: remove unneeded stmmac_poll_controller
net: lan743x: also select PHYLIB
net: ethernet: mediatek: disable irq before schedule napi
net: mana: Fix oversized sge0 for GSO packets
net: mana: Fix the tso_bytes calculation
net: mana: Fix TX CQE error handling
netlink: annotate data-races around sk->sk_err
sctp: update hb timer immediately after users change hb_interval
sctp: update transport state when processing a dupcook packet
tcp: fix delayed ACKs for MSS boundary condition
tcp: fix quick-ack counting to count actual ACKs of new data
page_pool: fix documentation typos
tipc: fix a potential deadlock on &tx->lock
net: stmmac: dwmac-stm32: fix resume on STM32 MCU
ipv4: Set offload_failed flag in fibmatch results
netfilter: nf_tables: nft_set_rbtree: fix spurious insertion failure
netfilter: nf_tables: Deduplicate nft_register_obj audit logs
...
|
|
Currently the Rockchip timer source clocks are set to xin24 for no obvious
reason and the actual timer clocks (SCLK_TIMER*) will get disabled during
boot process as they have no user. That will make the SoC stuck as no timer
source exists.
Fixes: a0201bff6259 ("ARM: dts: rockchip: add rk3128 soc dtsi")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20230829203721.281455-12-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Like most other Rockchip ARM SoCs, the PL330 needs the
arm,pl330-periph-burst quirk in order to work as expected.
Add it.
Fixes: a0201bff6259 ("ARM: dts: rockchip: add rk3128 soc dtsi")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20230829203721.281455-10-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The Cortex-A7 timer has 4 interrupts.
Add the missing one.
Fixes: a0201bff6259 ("ARM: dts: rockchip: add rk3128 soc dtsi")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20230829203721.281455-8-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The register address for i2c0 is missing a 0x to mark it as hex.
Fixes: a0201bff6259 ("ARM: dts: rockchip: add rk3128 soc dtsi")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20230829203721.281455-6-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Having sgtl5000_clk defines as "fixed-clock" is not enough to prevent
the dai subsystem from overwriting the frequency via sgtl5000_set_dai_sysclk.
Setting system-clock-fixed does the job, and now a 1kHz sine wave
comes out as actually 1kHz, no matter the sample rate of the source.
Testcase: These should sound the same:
speaker-test -r 48000 -t sine -f 1000
speaker-test -r 24000 -t sine -f 1000
Also remove the clock link here as having it in sgtl5000 and
sgtl5000_codec causes duplicate clock unprepares with associated
backtrace.
Cc: stable@vger.kernel.org
Fixes: c484cf93f61b ("arm64: dts: rockchip: add PX30-µQ7 (Ringneck) SoM with Haikou baseboard")
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Link: https://lore.kernel.org/r/20230907151725.198347-2-jakob.unterwurzacher@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
If the codec is not the clock master, the MCLK needs to be
synchronous to both I2S_SCL ans I2S_LRCLK. We do not have that
on Haikou, causing distorted audio.
Before:
Running an audio test script on Ringneck, 1kHz
output sine wave is not stable and shows distortion.
After:
10h audio test script loop failed only one time.
That is 0.00014% failure rate.
Cc: stable@vger.kernel.org
Fixes: c484cf93f61b ("arm64: dts: rockchip: add PX30-µQ7 (Ringneck) SoM with Haikou baseboard")
Signed-off-by: Ermin Sunj <ermin.sunj@theobroma-systems.com>
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Link: https://lore.kernel.org/r/20230907151725.198347-1-jakob.unterwurzacher@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Arm® Functional Fixed Hardware Specification defines LPI states,
which provide an architectural context loss flags field that can
be used to describe the context that might be lost when an LPI
state is entered.
- Core context Lost
- General purpose registers.
- Floating point and SIMD registers.
- System registers, include the System register based
- generic timer for the core.
- Debug register in the core power domain.
- PMU registers in the core power domain.
- Trace register in the core power domain.
- Trace context loss
- GICR
- GICD
Qualcomm's custom CPUs preserves the architectural state,
including keeping the power domain for local timers active.
when core is power gated, the local timers are sufficient to
wake the core up without needing broadcast timer.
The patch fixes the evaluation of cpuidle arch_flags, and moves only to
broadcast timer if core context lost is defined in ACPI LPI.
Fixes: a36a7fecfe60 ("ACPI / processor_idle: Add support for Low Power Idle(LPI) states")
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Oza Pawandeep <quic_poza@quicinc.com>
Link: https://lore.kernel.org/r/20231003173333.2865323-1-quic_poza@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-10-02
We've added 11 non-merge commits during the last 12 day(s) which contain
a total of 12 files changed, 176 insertions(+), 41 deletions(-).
The main changes are:
1) Fix BPF verifier to reset backtrack_state masks on global function
exit as otherwise subsequent precision tracking would reuse them,
from Andrii Nakryiko.
2) Several sockmap fixes for available bytes accounting,
from John Fastabend.
3) Reject sk_msg egress redirects to non-TCP sockets given this
is only supported for TCP sockets today, from Jakub Sitnicki.
4) Fix a syzkaller splat in bpf_mprog when hitting maximum program
limits with BPF_F_BEFORE directive, from Daniel Borkmann
and Nikolay Aleksandrov.
5) Fix BPF memory allocator to use kmalloc_size_roundup() to adjust
size_index for selecting a bpf_mem_cache, from Hou Tao.
6) Fix arch_prepare_bpf_trampoline return code for s390 JIT,
from Song Liu.
7) Fix bpf_trampoline_get when CONFIG_BPF_JIT is turned off,
from Leon Hwang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Use kmalloc_size_roundup() to adjust size_index
selftest/bpf: Add various selftests for program limits
bpf, mprog: Fix maximum program check on mprog attachment
bpf, sockmap: Reject sk_msg egress redirects to non-TCP sockets
bpf, sockmap: Add tests for MSG_F_PEEK
bpf, sockmap: Do not inc copied_seq when PEEK flag set
bpf: tcp_read_skb needs to pop skb regardless of seq
bpf: unconditionally reset backtrack_state masks on global func exit
bpf: Fix tr dereferencing
selftests/bpf: Check bpf_cubic_acked() is called via struct_ops
s390/bpf: Let arch_prepare_bpf_trampoline return program size
====================
Link: https://lore.kernel.org/r/20231002113417.2309-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In snp_accept_memory(), the npages variables value is calculated from
phys_addr_t variables but is an unsigned int. A very large range passed
into snp_accept_memory() could lead to truncating npages to zero. This
doesn't happen at the moment but let's be prepared.
Fixes: 6c3211796326 ("x86/sev: Add SNP-specific unaccepted memory support")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/6d511c25576494f682063c9fb6c705b526a3757e.1687441505.git.thomas.lendacky@amd.com
|
|
SNP retrieves the majority of CPUID information from the SNP CPUID page.
But there are times when that information needs to be supplemented by the
hypervisor, for example, obtaining the initial APIC ID of the vCPU from
leaf 1.
The current implementation uses the MSR protocol to retrieve the data from
the hypervisor, even when a GHCB exists. The problem arises when an NMI
arrives on return from the VMGEXIT. The NMI will be immediately serviced
and may generate a #VC requiring communication with the hypervisor.
Since a GHCB exists in this case, it will be used. As part of using the
GHCB, the #VC handler will write the GHCB physical address into the GHCB
MSR and the #VC will be handled.
When the NMI completes, processing resumes at the site of the VMGEXIT
which is expecting to read the GHCB MSR and find a CPUID MSR protocol
response. Since the NMI handling overwrote the GHCB MSR response, the
guest will see an invalid reply from the hypervisor and self-terminate.
Fix this problem by using the GHCB when it is available. Any NMI
received is properly handled because the GHCB contents are copied into
a backup page and restored on NMI exit, thus preserving the active GHCB
request or result.
[ bp: Touchups. ]
Fixes: ee0bfa08a345 ("x86/compressed/64: Add support for SEV-SNP CPUID table in #VC handlers")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/a5856fa1ebe3879de91a8f6298b6bbd901c61881.1690578565.git.thomas.lendacky@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Fourteen hotfixes, eleven of which are cc:stable. The remainder
pertain to issues which were introduced after 6.5"
* tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
Crash: add lock to serialize crash hotplug handling
selftests/mm: fix awk usage in charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh that may cause error
mm: mempolicy: keep VMA walk if both MPOL_MF_STRICT and MPOL_MF_MOVE are specified
mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions()
mm, memcg: reconsider kmem.limit_in_bytes deprecation
mm: zswap: fix potential memory corruption on duplicate store
arm64: hugetlb: fix set_huge_pte_at() to work with all swap entries
mm: hugetlb: add huge page size param to set_huge_pte_at()
maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW states
maple_tree: add mas_is_active() to detect in-tree walks
nilfs2: fix potential use after free in nilfs_gccache_submit_read_data()
mm: abstract moving to the next PFN
mm: report success more often from filemap_map_folio_range()
fs: binfmt_elf_efpic: fix personality for ELF-FDPIC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes: a kerneldoc build warning fix, add SRSO mitigation for
AMD-derived Hygon processors, and fix a SGX kernel crash in the page
fault handler that can trigger when ksgxd races to reclaim the SECS
special page, by making the SECS page unswappable"
* tag 'x86-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Resolves SECS reclaim vs. page fault for EAUG race
x86/srso: Add SRSO mitigation for Hygon processors
x86/kgdb: Fix a kerneldoc warning when build with W=1
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fixes from Ingo Molnar:
"Misc fixes: work around an AMD microcode bug on certain models, and
fix kexec kernel PMI handlers on AMD systems that get loaded on older
kernels that have an unexpected register state"
* tag 'perf-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/amd: Do not WARN() on every IRQ
perf/x86/amd/core: Fix overflow reset on hotplug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are the latest bug fixes that have come up in the soc tree. Most
of these are fairly minor. Most notably, the majority of changes this
time are not for dts files as usual.
- Updates to the addresses of the broadcom and aspeed entries in the
MAINTAINERS file.
- Defconfig updates to address a regression on samsung and a build
warning from an unknown Kconfig symbol
- Build fixes for the StrongARM and Uniphier platforms
- Code fixes for SCMI and FF-A firmware drivers, both of which had a
simple bug that resulted in invalid data, and a lesser fix for the
optee firmware driver
- Multiple fixes for the recently added loongson/loongarch "guts" soc
driver
- Devicetree fixes for RISC-V on the startfive platform, addressing
issues with NOR flash, usb and uart.
- Multiple fixes for NXP i.MX8/i.MX9 dts files, fixing problems with
clock, gpio, hdmi settings and the Makefile
- Bug fixes for i.MX firmware code and the OCOTP soc driver
- Multiple fixes for the TI sysc bus driver
- Minor dts updates for TI omap dts files, to address boot time
warnings and errors"
* tag 'soc-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits)
MAINTAINERS: Fix Florian Fainelli's email address
arm64: defconfig: enable syscon-poweroff driver
ARM: locomo: fix locomolcd_power declaration
soc: loongson: loongson2_guts: Remove unneeded semicolon
soc: loongson: loongson2_guts: Convert to devm_platform_ioremap_resource()
soc: loongson: loongson_pm2: Populate children syscon nodes
dt-bindings: soc: loongson,ls2k-pmc: Allow syscon-reboot/syscon-poweroff as child
soc: loongson: loongson_pm2: Drop useless of_device_id compatible
dt-bindings: soc: loongson,ls2k-pmc: Use fallbacks for ls2k-pmc compatible
soc: loongson: loongson_pm2: Add dependency for INPUT
arm64: defconfig: remove CONFIG_COMMON_CLK_NPCM8XX=y
ARM: uniphier: fix cache kernel-doc warnings
MAINTAINERS: aspeed: Update Andrew's email address
MAINTAINERS: aspeed: Update git tree URL
firmware: arm_ffa: Don't set the memory region attributes for MEM_LEND
arm64: dts: imx: Add imx8mm-prt8mm.dtb to build
arm64: dts: imx8mm-evk: Fix hdmi@3d node
soc: imx8m: Enable OCOTP clock for imx8mm before reading registers
arm64: dts: imx8mp-beacon-kit: Fix audio_pll2 clock
arm64: dts: imx8mp: Fix SDMA2/3 clocks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix arch_stack_walk_reliable(), used by live patching
- Fix powerpc selftests to work with run_kselftest.sh
Thanks to Joe Lawrence and Petr Mladek.
* tag 'powerpc-6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix emit_tests to work with run_kselftest.sh
powerpc/stacktrace: Fix arch_stack_walk_reliable()
|
|
In the plpar_hcall trace code, currently we use r0
to store the value of r4. But this value is not
used subsequently in the code. Hence remove this unused
save to r0 in plpar_hcall and plpar_hcall9
Suggested-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230929172337.7906-2-atrajeev@linux.vnet.ibm.com
|
|
In powerpc pseries system, below behaviour is observed while
enabling tracing on hcall:
# cd /sys/kernel/debug/tracing/
# cat events/powerpc/hcall_exit/enable
0
# echo 1 > events/powerpc/hcall_exit/enable
# ls
-bash: fork: Bad address
Above is from power9 lpar with latest kernel. Past this, softlockup
is observed. Initially while attempting via perf_event_open to
use "PERF_TYPE_TRACEPOINT", kernel panic was observed.
perf config used:
================
memset(&pe[1],0,sizeof(struct perf_event_attr));
pe[1].type=PERF_TYPE_TRACEPOINT;
pe[1].size=96;
pe[1].config=0x26ULL; /* 38 raw_syscalls/sys_exit */
pe[1].sample_type=0; /* 0 */
pe[1].read_format=PERF_FORMAT_TOTAL_TIME_ENABLED|PERF_FORMAT_TOTAL_TIME_RUNNING|PERF_FORMAT_ID|PERF_FORMAT_GROUP|0x10ULL; /* 1f */
pe[1].inherit=1;
pe[1].precise_ip=0; /* arbitrary skid */
pe[1].wakeup_events=0;
pe[1].bp_type=HW_BREAKPOINT_EMPTY;
pe[1].config1=0x1ULL;
Kernel panic logs:
==================
Kernel attempted to read user page (8) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000008
Faulting instruction address: 0xc0000000004c2814
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: nfnetlink bonding tls rfkill sunrpc dm_service_time dm_multipath pseries_rng xts vmx_crypto xfs libcrc32c sd_mod t10_pi crc64_rocksoft crc64 sg ibmvfc scsi_transport_fc ibmveth dm_mirror dm_region_hash dm_log dm_mod fuse
CPU: 0 PID: 1431 Comm: login Not tainted 6.4.0+ #1
Hardware name: IBM,8375-42A POWER9 (raw) 0x4e0202 0xf000005 of:IBM,FW950.30 (VL950_892) hv:phyp pSeries
NIP page_remove_rmap+0x44/0x320
LR wp_page_copy+0x384/0xec0
Call Trace:
0xc00000001416e400 (unreliable)
wp_page_copy+0x384/0xec0
__handle_mm_fault+0x9d4/0xfb0
handle_mm_fault+0xf0/0x350
___do_page_fault+0x48c/0xc90
hash__do_page_fault+0x30/0x70
do_hash_fault+0x1a4/0x330
data_access_common_virt+0x198/0x1f0
--- interrupt: 300 at 0x7fffae971abc
git bisect tracked this down to below commit:
'commit baa49d81a94b ("powerpc/pseries: hvcall stack frame overhead")'
This commit changed STACK_FRAME_OVERHEAD (112 ) to
STACK_FRAME_MIN_SIZE (32 ) since 32 bytes is the minimum size
for ELFv2 stack. With the latest kernel, when running on ELFv2,
STACK_FRAME_MIN_SIZE is used to allocate stack size.
During plpar_hcall_trace, first call is made to HCALL_INST_PRECALL
which saves the registers and allocates new stack frame. In the
plpar_hcall_trace code, STK_PARAM is accessed at two places.
1. To save r4: std r4,STK_PARAM(R4)(r1)
2. To access r4 back: ld r12,STK_PARAM(R4)(r1)
HCALL_INST_PRECALL precall allocates a new stack frame. So all
the stack parameter access after the precall, needs to be accessed
with +STACK_FRAME_MIN_SIZE. So the store instruction should be:
std r4,STACK_FRAME_MIN_SIZE+STK_PARAM(R4)(r1)
If the "std" is not updated with STACK_FRAME_MIN_SIZE, we will
end up with overwriting stack contents and cause corruption.
But instead of updating 'std', we can instead remove it since
HCALL_INST_PRECALL already saves it to the correct location.
similarly load instruction should be:
ld r12,STACK_FRAME_MIN_SIZE+STK_PARAM(R4)(r1)
Fix the load instruction to correctly access the stack parameter
with +STACK_FRAME_MIN_SIZE and remove the store of r4 since the
precall saves it correctly.
Cc: stable@vger.kernel.org # v6.2+
Fixes: baa49d81a94b ("powerpc/pseries: hvcall stack frame overhead")
Co-developed-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230929172337.7906-1-atrajeev@linux.vnet.ibm.com
|
|
When called with a swap entry that does not embed a PFN (e.g.
PTE_MARKER_POISONED or PTE_MARKER_UFFD_WP), the previous implementation of
set_huge_pte_at() would either cause a BUG() to fire (if CONFIG_DEBUG_VM
is enabled) or cause a dereference of an invalid address and subsequent
panic.
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
Arguably, the root cause is really due to commit 18f3962953e4 ("mm:
hugetlb: kill set_huge_swap_pte_at()"), which aimed to simplify the
interface to the core code by removing set_huge_swap_pte_at() (which took
a page size parameter) and replacing it with calls to set_huge_pte_at()
where the size was inferred from the folio, as descibed above. While that
commit didn't break anything at the time, it did break the interface
because it couldn't handle swap entries without PFNs. And since then new
callers have come along which rely on this working. But given the
brokeness is only observable after commit 8a13897fb0da ("mm: userfaultfd:
support UFFDIO_POISON for hugetlbfs"), that one gets the Fixes tag.
Now that we have modified the set_huge_pte_at() interface to pass the huge
page size in the previous patch, we can trivially fix this issue.
Link: https://lkml.kernel.org/r/20230922115804.2043771-3-ryan.roberts@arm.com
Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Fix set_huge_pte_at() panic on arm64", v2.
This series fixes a bug in arm64's implementation of set_huge_pte_at(),
which can result in an unprivileged user causing a kernel panic. The
problem was triggered when running the new uffd poison mm selftest for
HUGETLB memory. This test (and the uffd poison feature) was merged for
v6.5-rc7.
Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable
(correctly this time) to get it backported to v6.5, where the issue first
showed up.
Description of Bug
==================
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise,
it will dereference a bad pointer in page_folio():
static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry)
{
VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry));
return page_folio(pfn_to_page(swp_offset_pfn(entry)));
}
Fix
===
The simplest fix would have been to revert the dodgy cleanup commit
18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since
things have moved on, this would have required an audit of all the new
set_huge_pte_at() call sites to see if they should be converted to
set_huge_swap_pte_at(). As per the original intent of the change, it
would also leave us open to future bugs when people invariably get it
wrong and call the wrong helper.
So instead, I've added a huge page size parameter to set_huge_pte_at().
This means that the arm64 code has the size in all cases. It's a bigger
change, due to needing to touch the arches that implement the function,
but it is entirely mechanical, so in my view, low risk.
I've compile-tested all touched arches; arm64, parisc, powerpc, riscv,
s390, sparc (and additionally x86_64). I've additionally booted and run
mm selftests against arm64, where I observe the uffd poison test is fixed,
and there are no other regressions.
This patch (of 2):
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the pte is being set in set_huge_pte_at(). Provide for this by
adding an `unsigned long sz` parameter to the function. This follows the
same pattern as huge_pte_clear().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, parisc, powerpc,
riscv, s390, sparc). The actual arm64 bug will be fixed in a separate
commit.
No behavioral changes intended.
Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com
Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In order to fix the L1TF vulnerability, x86 can invert the PTE bits for
PROT_NONE VMAs, which means we cannot move from one PTE to the next by
adding 1 to the PFN field of the PTE. This results in the BUG reported at
[1].
Abstract advancing the PTE to the next PFN through a pte_next_pfn()
function/macro.
Link: https://lkml.kernel.org/r/20230920040958.866520-1-willy@infradead.org
Fixes: bcc6cc832573 ("mm: add default definition of set_ptes()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: syzbot+55cc72f8cc3a549119df@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/000000000000d099fa0604f03351@google.com [1]
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull Xtensa fixes from Max Filippov:
- fix build warnings from builds performed with W=1
* tag 'xtensa-20230928' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: boot/lib: fix function prototypes
xtensa: umulsidi3: fix conditional expression
xtensa: boot: don't add include-dirs
xtensa: iss/network: make functions static
xtensa: tlb: include <asm/tlb.h> for missing prototype
xtensa: hw_breakpoint: include header for missing prototype
xtensa: smp: add headers for missing function prototypes
irqchip: irq-xtensa-mx: include header for missing prototype
xtensa: traps: add <linux/cpu.h> for function prototype
xtensa: stacktrace: include <asm/ftrace.h> for prototype
xtensa: signal: include headers for function prototypes
xtensa: processor.h: add init_arch() prototype
xtensa: ptrace: add prototypes to <asm/ptrace.h>
xtensa: irq: include <asm/traps.h>
xtensa: fault: include <asm/traps.h>
xtensa: add default definition for XCHAL_HAVE_DIV32
|
|
Implement the workaround for ARM Cortex-A520 erratum 2966298. On an
affected Cortex-A520 core, a speculatively executed unprivileged load
might leak data from a privileged load via a cache side channel. The
issue only exists for loads within a translation regime with the same
translation (e.g. same ASID and VMID). Therefore, the issue only affects
the return to EL0.
The workaround is to execute a TLBI before returning to EL0 after all
loads of privileged data. A non-shareable TLBI to any address is
sufficient.
The workaround isn't necessary if page table isolation (KPTI) is
enabled, but for simplicity it will be. Page table isolation should
normally be disabled for Cortex-A520 as it supports the CSV3 feature
and the E0PD feature (used when KASLR is enabled).
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230921194156.1050055-2-robh@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add the CPU Part number for the new Arm design.
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230921194156.1050055-1-robh@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The SGX EPC reclaimer (ksgxd) may reclaim the SECS EPC page for an
enclave and set secs.epc_page to NULL. The SECS page is used for EAUG
and ELDU in the SGX page fault handler. However, the NULL check for
secs.epc_page is only done for ELDU, not EAUG before being used.
Fix this by doing the same NULL check and reloading of the SECS page as
needed for both EAUG and ELDU.
The SECS page holds global enclave metadata. It can only be reclaimed
when there are no other enclave pages remaining. At that point,
virtually nothing can be done with the enclave until the SECS page is
paged back in.
An enclave can not run nor generate page faults without a resident SECS
page. But it is still possible for a #PF for a non-SECS page to race
with paging out the SECS page: when the last resident non-SECS page A
triggers a #PF in a non-resident page B, and then page A and the SECS
both are paged out before the #PF on B is handled.
Hitting this bug requires that race triggered with a #PF for EAUG.
Following is a trace when it happens.
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:sgx_encl_eaug_page+0xc7/0x210
Call Trace:
? __kmem_cache_alloc_node+0x16a/0x440
? xa_load+0x6e/0xa0
sgx_vma_fault+0x119/0x230
__do_fault+0x36/0x140
do_fault+0x12f/0x400
__handle_mm_fault+0x728/0x1110
handle_mm_fault+0x105/0x310
do_user_addr_fault+0x1ee/0x750
? __this_cpu_preempt_check+0x13/0x20
exc_page_fault+0x76/0x180
asm_exc_page_fault+0x27/0x30
Fixes: 5a90d2c3f5ef ("x86/sgx: Support adding of pages to an initialized enclave")
Signed-off-by: Haitao Huang <haitao.huang@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20230728051024.33063-1-haitao.huang%40linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix high_memory calculation and module loader errors with latest
binutils"
* tag 'loongarch-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Add support for 64_PCREL relocation type
LoongArch: Add support for 32_PCREL relocation type
LoongArch: Define relocation types for ABI v2.10
LoongArch: numa: Fix high_memory calculation
|
|
Add mitigation for the speculative return stack overflow vulnerability
which exists on Hygon processors too.
Signed-off-by: Pu Wen <puwen@hygon.cn>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/tencent_4A14812842F104E93AA722EC939483CEFF05@qq.com
|
|
Enable the generic syscon-poweroff driver used on all Exynos ARM64 SoCs
(e.g. Exynos5433) and few APM SoCs.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20230901115732.45854-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The locomolcd driver has one remaining missing-prototype warning:
drivers/video/backlight/locomolcd.c:83:6: error: no previous prototype for 'locomolcd_power' [-Werror=missing-prototypes]
There is in fact an unused prototype with a similar name in a global
header, so move the actual one there and remove the old one.
Link: https://lore.kernel.org/r/20230927194844.680771-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Compile the andes errata with cflags set to " -mcmodel=medany"
when CONFIG_RISCV_ALTERNATIVE_EARLY is enabled.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309111311.8tcq3KVc-lkp@intel.com/
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20230925153844.26820-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
