| Age | Commit message (Collapse) | Author |
|---|
|
So they can be used in ASM code. For this it is also necessary to convert
them to defines. Will be used for the rework of the entry code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134903.731004084@linutronix.de
|
|
Traps enable interrupts conditionally but rely on the ASM return code to
disable them again. That results in redundant interrupt disable and trace
calls.
Make the trap handlers disable interrupts before returning to avoid that,
which allows simplification of the ASM entry code in follow up changes.
Originally-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134903.622702796@linutronix.de
|
|
When PARAVIRT_XXL is in use, then load_gs_index() uses xen_load_gs_index()
and asm_load_gs_index() is unused.
It's therefore pointless to use the paravirtualized SWAPGS implementation
in asm_load_gs_index(). Switch it to a plain swapgs.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200512213809.583980272@linutronix.de
|
|
There is absolutely no point in doing this in ASM code. Move it to C.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134903.531534675@linutronix.de
|
|
Replace the notrace and NOKPROBE annotations with noinstr.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134903.439765290@linutronix.de
|
|
This is called from deep entry ASM in a situation where instrumentation
will cause more harm than providing useful information.
Switch from memmove() to memcpy() because memmove() can't be called
from noinstr code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134903.346741553@linutronix.de
|
|
Currently entry_64_compat is exempt from objtool, but with vmlinux
mode there is no hiding it.
Make the following changes to make it pass:
- change entry_SYSENTER_compat to STT_NOTYPE; it's not a function
and doesn't have function type stack setup.
- mark all STT_NOTYPE symbols with UNWIND_HINT_EMPTY; so we do
validate them and don't treat them as unreachable.
- don't abuse RSP as a temp register, this confuses objtool
mightily as it (rightfully) thinks we're doing unspeakable
things to the stack.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134341.272248024@linutronix.de
|
|
Prevent the compiler from uninlining and creating traceable/probable
functions as this is invoked _after_ context tracking switched to
CONTEXT_USER and rcu idle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134340.902709267@linutronix.de
|
|
This is another step towards more C-code and less convoluted ASM.
Similar to the entry path, invoke the tracer before context tracking which
might turn off RCU and invoke lockdep as the last step before going back to
user space. Annotate the code sections in exit_to_user_mode() accordingly
so objtool won't complain about the tracer invocation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134340.703783926@linutronix.de
|
|
Now that the C entry points are safe, move the irq flags tracing code into
the entry helper:
- Invoke lockdep before calling into context tracking
- Use the safe trace_hardirqs_on_prepare() trace function after context
tracking established state and RCU is watching.
enter_from_user_mode() is also still invoked from the exception/interrupt
entry code which still contains the ASM irq flags tracing. So this is just
a redundant and harmless invocation of tracing / lockdep until these are
removed as well.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134340.611961721@linutronix.de
|
|
Mark the various syscall entries with noinstr to protect them against
instrumentation and add the noinstrumentation_begin()/end() annotations to mark the
parts of the functions which are safe to call out into instrumentable code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134340.520277507@linutronix.de
|
|
Both the callers in the low level ASM code and __context_tracking_exit()
which is invoked from enter_from_user_mode() via user_exit_irqoff() are
marked NOKPROBE. Allowing enter_from_user_mode() to be probed is
inconsistent at best.
Aside of that while function tracing per se is safe the function trace
entry/exit points can be used via BPF as well which is not safe to use
before context tracking has reached CONTEXT_KERNEL and adjusted RCU.
Mark it noinstr which moves it into the instrumentation protected text
section and includes notrace.
Note, this needs further fixups in context tracking to ensure that the
full call chain is protected. Will be addressed in follow up changes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134340.429059405@linutronix.de
|
|
All ASM code which is not part of the entry functionality can move out into
the .text section. No reason to keep it in the non-instrumentable entry
section.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134340.320164650@linutronix.de
|
|
All ASM code which is not part of the entry functionality can move out into
the .text section. No reason to keep it in the non-instrumentable entry
section.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134340.227579223@linutronix.de
|
|
No more users.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Warnings, bugs and stack protection fails from noinstr sections, e.g. low
level and early entry code, are likely to be fatal.
Mark them as "safe" to be invoked from noinstr protected code to avoid
annotating all usage sites. Getting the information out is important.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134100.376598577@linutronix.de
|
|
The sanitizers are not really applicable to the fragile low level entry
code. Entry code needs to carefully setup a normal 'runtime' environment.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Link: https://lkml.kernel.org/r/20200505134059.970057117@linutronix.de
|
|
No users left since two years due to commit 21d375b6b34f ("x86/entry/64:
Remove the SYSCALL64 fast path")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134059.061301403@linutronix.de
|
|
GAS cannot optimize out the test and conditional jump when context tracking
is disabled and CALL_enter_from_user_mode is an empty macro.
Wrap it in #ifdeffery. Will go away once all this is moved to C.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134058.955968069@linutronix.de
|
|
Use of memmove() in #DF is problematic considered tracing and other
instrumentation.
Remove the memmove() call and simply write out what needs doing; this
even clarifies the code, win-win! The code copies from the espfix64
stack to the normal task stack, there is no possible way for that to
overlap.
Survives selftests/x86, specifically sigreturn_64.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134058.863038566@linutronix.de
|
|
A data breakpoint near the top of an IST stack will cause unrecoverable
recursion. A data breakpoint on the GDT, IDT, or TSS is terrifying.
Prevent either of these from happening.
Co-developed-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Link: https://lkml.kernel.org/r/20200505134058.272448010@linutronix.de
|
|
With commit dc20b2d52653 ("x86/idt: Move interrupt gate initialization to
IDT code") non assigned system vectors are also marked as used in
'used_vectors' (now 'system_vectors') bitmap. This makes checks in
arch_show_interrupts() whether a particular system vector is allocated to
always pass and e.g. 'Hyper-V reenlightenment interrupts' entry always
shows up in /proc/interrupts.
Another side effect of having all unassigned system vectors marked as used
is that irq_matrix_debug_show() will wrongly count them among 'System'
vectors.
As it is now ensured that alloc_intr_gate() is not called after init, it is
possible to leave unused entries in 'system_vectors' unset to fix these
issues.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200428093824.1451532-4-vkuznets@redhat.com
|
|
There seems to be no reason to allocate interrupt gates after init. Mark
alloc_intr_gate() as __init and add WARN_ON() checks making sure it is
only used before idt_setup_apic_and_irq_gates() finalizes IDT setup and
maps all un-allocated entries to spurious entries.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200428093824.1451532-3-vkuznets@redhat.com
|
|
As a preparatory change for making alloc_intr_gate() __init split
xen_callback_vector() into callback vector setup via hypercall
(xen_setup_callback_vector()) and interrupt gate allocation
(xen_alloc_callback_vector()).
xen_setup_callback_vector() is being called twice: on init and upon
system resume from xen_hvm_post_suspend(). alloc_intr_gate() only
needs to be called once.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200428093824.1451532-2-vkuznets@redhat.com
|
|
machine_check is function address, the address operator on it is nop for
compiler.
Make it consistent with the other function addresses in the same file.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200419144049.1906-3-laijs@linux.alibaba.com
|
|
When native_load_gs_index() fails on .Lgs_change, CR3 must be kernel
CR3. No need to switch it.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200419144049.1906-2-laijs@linux.alibaba.com
|
|
The label .Lcommon_\sym was introduced by 39e9543344fa.
(x86-64: Reduce amount of redundant code generated for invalidate_interruptNN)
And all the other relevant information was removed by 52aec3308db8
(x86/tlb: replace INVALIDATE_TLB_VECTOR by CALL_FUNCTION_VECTOR)
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200419144049.1906-4-laijs@linux.alibaba.com
|
|
Commit cfa7ede20f133c ("arm64: set TEXT_OFFSET to 0x0 in preparation for
removing it entirely") results in boot failures when booting kernels that
are built without KASLR support on broken bootloaders that ignore the
TEXT_OFFSET value passed via the header, and use the default of 0x80000
instead.
To work around this, turn CONFIG_RELOCATABLE on by default, even if KASLR
itself (CONFIG_RANDOMIZE_BASE) is turned off, and require CONFIG_EXPERT
to be enabled to deviate from this. Then, emit a warning into the kernel
log if we are not booting via the EFI stub (which is permitted to deviate
from the placement restrictions) and the kernel base address is not placed
according to the rules as laid out in Documentation/arm64/booting.rst.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20200611124330.252163-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Redefine GZIP, BZIP2, LZOP variables as KGZIP, KBZIP2, KLZOP resp.
GZIP, BZIP2, LZOP env variables are reserved by the tools. The original
attempt to redefine them internally doesn't work in makefiles/scripts
intercall scenarios, e.g., "make GZIP=gzip bindeb-pkg" and results in
broken builds. There can be other broken build commands because of this,
so the universal solution is to use non-reserved env variables for the
compression tools.
Fixes: 8dfb61dcbace ("kbuild: add variables for compression tools")
Signed-off-by: Denis Efremov <efremov@linux.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Currently instrumentation of atomic primitives is done at the architecture
level, while composites or fallbacks are provided at the generic level.
The result is that there are no uninstrumented variants of the
fallbacks. Since there is now need of such variants to isolate text poke
from any form of instrumentation invert this ordering.
Doing this means moving the instrumentation into the generic code as
well as having (for now) two variants of the fallbacks.
Notes:
- the various *cond_read* primitives are not proper fallbacks
and got moved into linux/atomic.c. No arch_ variants are
generated because the base primitives smp_cond_load*()
are instrumented.
- once all architectures are moved over to arch_atomic_ one of the
fallback variants can be removed and some 2300 lines reclaimed.
- atomic_{read,set}*() are no longer double-instrumented
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/20200505134058.769149955@linutronix.de
|
|
The original vdso_data page is empty, so the permission of the vdso_data
page can be the same with the vdso text page. After introducing the vDSO
common flow, the vdso_data is not empty and the permission should be
changed to read-only.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Even if RISC-V has supported the vDSO feature, the latency of the functions
for obtaining the system time is still expensive. It is because these
functions still trigger a corresponding system call in the process, which
slows down the response time. If we want to remove the system call to
reduce the latency, the kernel should have the ability to output the system
clock information to userspace. This patch introduces the vDSO common flow
to enable the kernel to achieve the above feature and uses "rdtime"
instruction to obtain the current time in the user space. Under this
condition, the latency cost by the ecall from U-mode to S-mode can be
eliminated. After applying this patch, the latency of gettimeofday()
measured on the HiFive unleashed board can be reduced by %61.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Switch the function documentation to kerneldoc comments, and add
WARN_ON_ONCE asserts that the calling thread is a kernel thread and does
not have ->mm set (or has ->mm set in the case of unuse_mm).
Also give the functions a kthread_ prefix to better document the use case.
[hch@lst.de: fix a comment typo, cover the newly merged use_mm/unuse_mm caller in vfio]
Link: http://lkml.kernel.org/r/20200416053158.586887-3-hch@lst.de
[sfr@canb.auug.org.au: powerpc/vas: fix up for {un}use_mm() rename]
Link: http://lkml.kernel.org/r/20200422163935.5aa93ba5@canb.auug.org.au
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [usb]
Acked-by: Haren Myneni <haren@linux.ibm.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Link: http://lkml.kernel.org/r/20200404094101.672954-6-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc uaccess updates from Al Viro:
"Assorted uaccess patches for this cycle - the stuff that didn't fit
into thematic series"
* 'uaccess.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
bpf: make bpf_check_uarg_tail_zero() use check_zeroed_user()
x86: kvm_hv_set_msr(): use __put_user() instead of 32bit __clear_user()
user_regset_copyout_zero(): use clear_user()
TEST_ACCESS_OK _never_ had been checked anywhere
x86: switch cp_stat64() to unsafe_put_user()
binfmt_flat: don't use __put_user()
binfmt_elf_fdpic: don't use __... uaccess primitives
binfmt_elf: don't bother with __{put,copy_to}_user()
pselect6() and friends: take handling the combined 6th/7th args into helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux
Pull READ/WRITE_ONCE rework from Will Deacon:
"This the READ_ONCE rework I've been working on for a while, which
bumps the minimum GCC version and improves code-gen on arm64 when
stack protector is enabled"
[ Side note: I'm _really_ tempted to raise the minimum gcc version to
4.9, so that we can just say that we require _Generic() support.
That would allow us to more cleanly handle a lot of the cases where we
depend on very complex macros with 'sizeof' or __builtin_choose_expr()
with __builtin_types_compatible_p() etc.
This branch has a workaround for sparse not handling _Generic(),
either, but that was already fixed in the sparse development branch,
so it's really just gcc-4.9 that we'd require. - Linus ]
* 'rwonce/rework' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux:
compiler_types.h: Use unoptimized __unqual_scalar_typeof for sparse
compiler_types.h: Optimize __unqual_scalar_typeof compilation time
compiler.h: Enforce that READ_ONCE_NOCHECK() access size is sizeof(long)
compiler-types.h: Include naked type in __pick_integer_type() match
READ_ONCE: Fix comment describing 2x32-bit atomicity
gcov: Remove old GCC 3.4 support
arm64: barrier: Use '__unqual_scalar_typeof' for acquire/release macros
locking/barriers: Use '__unqual_scalar_typeof' for load-acquire macros
READ_ONCE: Drop pointer qualifiers when reading from scalar types
READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses
READ_ONCE: Simplify implementations of {READ,WRITE}_ONCE()
arm64: csum: Disable KASAN for do_csum()
fault_inject: Don't rely on "return value" from WRITE_ONCE()
net: tls: Avoid assigning 'const' pointer to non-const pointer
netfilter: Avoid assigning 'const' pointer to non-const pointer
compiler/gcc: Raise minimum GCC version for kernel builds to 4.8
|
|
Fixes: e05c7b1f2bc4b7 ("mm: pgtable: add shortcuts for accessing kernel PMD and PTE")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- Use fdatasync() in ubd
- Add a generic "fd" vector transport
- Minor cleanups and fixes
* tag 'for-linus-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: virtio: Replace zero-length array with flexible-array
um: Use fdatasync() when mapping the UBD FSYNC command
um: Do not evaluate compiler's library path when cleaning
um: Neaten vu_err macro definition
um: Add a generic "fd" vector transport
um: Add include: memset() and memcpy() are in <string.h>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This time around we have four lines of diff in the core framework,
removing a function that isn't used anymore. Otherwise the main new
thing for the common clk framework is that it is selectable in the
Kconfig language now. Hopefully this will let clk drivers and clk
consumers be testable on more than the architectures that support the
clk framework. The goal is to introduce some Kunit tests for the
framework.
Outside of the core framework we have the usual set of various driver
updates and non-critical fixes. The dirstat shows that the new
Baikal-T1 driver is the largest addition this time around in terms of
lines of code. After that the x86 (Intel), Qualcomm, and Mediatek
drivers introduce many lines to support new or upcoming SoCs. After
that the dirstat shows the usual suspects working on their SoC support
by fixing minor bugs, correcting data and converting some of their DT
bindings to YAML.
Core:
- Allow the COMMON_CLK config to be selectable
New Drivers:
- Clk driver for Baikal-T1 SoCs
- Mediatek MT6765 clock support
- Support for Intel Agilex clks
- Add support for X1830 and X1000 Ingenic SoC clk controllers
- Add support for the new Renesas RZ/G1H (R8A7742) SoC
- Add support for Qualcomm's MSM8939 Generic Clock Controller
Updates:
- Support IDT VersaClock 5P49V5925
- Bunch of updates for HSDK clock generation unit (CGU) driver
- Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs
- Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver
- Enable supply regulators for GPU gdscs on Qualcomm SoCs
- Add support for Si5342, Si5344 and Si5345 chips
- Support custom flags in Xilinx zynq firmware
- Various small fixes to the Xilinx clk driver
- A single minor rounding fix for the legacy Allwinner clock support
- A few patches from Abel Vesa as preparation of adding audiomix
clock support on i.MX
- A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and
clk-pllv3 drivers
- Drop dependency on ARM64 for i.MX8M clock driver, to support
aarch32 mode on aarch64 hardware
- A series from Peng Fan to improve i.MX8M clock drivers, using
composite clock for core and bus clk slice
- Set a better parent clock for flexcan on i.MX6UL to support CiA102
defined bit rates
- A couple changes for EMC frequency scaling on Tegra210
- Support for CPU frequency scaling on Tegra20/Tegra30
- New clk gate for CSI test pattern generator on Tegra210
- Regression fixes for Samsung exynos542x and exynos5433 SoCs
- Use of fallthrough; attribute for Samsung s3c24xx
- Updates and fixup HDMI and video clocks on Meson8b
- Fixup reset polarity on Meson8b
- Fix GPU glitch free mux switch on Meson gx and g12
- A minor fix for the currently unused suspend/resume handling on
Renesas RZ/A1 and RZ/A2
- Two more conversions of Renesas DT bindings to json-schema
- Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits)
clk: mediatek: Remove ifr{0,1}_cfg_regs structures
clk: baikal-t1: remove redundant assignment to variable 'divider'
clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible"
dt-bindings: clock: Add a missing include to MMP Audio Clock binding
dt: Add bindings for IDT VersaClock 5P49V5925
clk: vc5: Add support for IDT VersaClock 5P49V6965
clk: Add Baikal-T1 CCU Dividers driver
clk: Add Baikal-T1 CCU PLLs driver
dt-bindings: clk: Add Baikal-T1 CCU Dividers binding
dt-bindings: clk: Add Baikal-T1 CCU PLLs binding
clk: mediatek: assign the initial value to clk_init_data of mtk_mux
clk: mediatek: Add MT6765 clock support
clk: mediatek: add mt6765 clock IDs
dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC
dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC
dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC
CLK: HSDK: CGU: add support for 148.5MHz clock
CLK: HSDK: CGU: support PLL bypassing
CLK: HSDK: CGU: check if PLL is bypassed first
clk: clk-si5341: Add support for the Si5345 series
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"This time there are lots of changes. Quite a few changes to the core,
lots of driver changes and one change to kobject core (with Ack from
Greg).
Summary:
kobject:
- Increase number of allowed uevent variables
power-supply core:
- Add power-supply type in uevent
- Cleanup property handling in core
- Make property and usb_type pointers const
- Convert core power-supply DT binding to YAML
- Cleanup HWMON code
- Add new health status "calibration required"
- Add new properties for manufacture date and capacity error margin
battery drivers:
- new cw2015 battery driver used by pine64 Pinebook Pro laptop
- axp22: blacklist on Meegopad T02
- sc27xx: support current/voltage reading
- max17042: support time-to-empty reading
- simple-battery: add more battery parameters
- bq27xxx: convert DT binding document to YAML
- sbs-battery: add TI BQ20Z65 support, fix technology property,
convert DT binding to YAML, add option to disable charger
broadcasts, add new properties: manufacture date, capacity
error margin, average current, charge current and voltage and
support calibration required health status
- misc fixes
charger drivers:
- bq25890: cleanup, implement charge type, precharge current and
input current limiting properties
- bd70528: use new linear range helper library
- bd99954: new charger driver
- mp2629: new charger driver
- misc fixes
reboot drivers:
- oxnas-restart: introduce new driver
- syscon-reboot: convert DT binding to YAML, add parent syscon device
support
- misc fixes"
* tag 'for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (85 commits)
power: supply: cw2015: Attach OF ID table to the driver
power: reset: gpio-poweroff: add missing '\n' in dev_err()
Revert "power: supply: sbs-battery: simplify read_read_string_data"
Revert "power: supply: sbs-battery: add PEC support"
dt-bindings: power: sbs-battery: Convert to yaml
power: supply: sbs-battery: constify power-supply property array
power: supply: sbs-battery: switch to i2c's probe_new
power: supply: sbs-battery: switch from of_property_* to device_property_*
power: supply: sbs-battery: add ability to disable charger broadcasts
power: supply: sbs-battery: fix idle battery status
power: supply: sbs-battery: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED support
power: supply: sbs-battery: add MANUFACTURE_DATE support
power: supply: sbs-battery: add POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT/VOLTAGE_MAX support
power: supply: sbs-battery: Improve POWER_SUPPLY_PROP_TECHNOLOGY support
power: supply: sbs-battery: add POWER_SUPPLY_PROP_CURRENT_AVG support
power: supply: sbs-battery: add PEC support
power: supply: sbs-battery: simplify read_read_string_data
power: supply: sbs-battery: add POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN support
power: supply: sbs-battery: Add TI BQ20Z65 support
power: supply: core: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED
...
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Recent refactoring of the arm64 code make it awkward to have
hyp_symbol_addr() in kvm_mmu.h. Instead, move it next to its
main user, which is __hyp_this_cpu_ptr().
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
"mm: consolidate pte_index() and pte_offset_*() definitions" was supposed
to remove arch/sparc/mm/srmmu.c:pte_offset_kernel().
Fixes: 974b9b2c68f3d35 ("mm: consolidate pte_index() and pte_offset_*() definitions")
Reported-by: kernel test robot <lkp@intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On a VHE system, the EL1 state is left in the CPU most of the time,
and only syncronized back to memory when vcpu_put() is called (most
of the time on preemption).
Which means that when injecting an exception, we'd better have a way
to either:
(1) write directly to the EL1 sysregs
(2) synchronize the state back to memory, and do the changes there
For an AArch64, we already do (1), so we are safe. Unfortunately,
doing the same thing for AArch32 would be pretty invasive. Instead,
we can easily implement (2) by calling the put/load architectural
backends, and keep preemption disabled. We can then reload the
state back into EL1.
Cc: stable@vger.kernel.org
Reported-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
AArch32 CP1x registers are overlayed on their AArch64 counterparts
in the vcpu struct. This leads to an interesting problem as they
are stored in their CPU-local format, and thus a CP1x register
doesn't "hit" the lower 32bit portion of the AArch64 register on
a BE host.
To workaround this unfortunate situation, introduce a bias trick
in the vcpu_cp1x() accessors which picks the correct half of the
64bit register.
Cc: stable@vger.kernel.org
Reported-by: James Morse <james.morse@arm.com>
Tested-by: James Morse <james.morse@arm.com>
Acked-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Will reported a UBSAN warning:
UBSAN: null-ptr-deref in arch/arm64/kernel/smp.c:596:6
member access within null pointer of type 'struct acpi_madt_generic_interrupt'
CPU: 0 PID: 0 Comm: swapper Not tainted 5.7.0-rc6-00124-g96bc42ff0a82 #1
Call trace:
dump_backtrace+0x0/0x384
show_stack+0x28/0x38
dump_stack+0xec/0x174
handle_null_ptr_deref+0x134/0x174
__ubsan_handle_type_mismatch_v1+0x84/0xa4
acpi_parse_gic_cpu_interface+0x60/0xe8
acpi_parse_entries_array+0x288/0x498
acpi_table_parse_entries_array+0x178/0x1b4
acpi_table_parse_madt+0xa4/0x110
acpi_parse_and_init_cpus+0x38/0x100
smp_init_cpus+0x74/0x258
setup_arch+0x350/0x3ec
start_kernel+0x98/0x6f4
This is from the use of the ACPI_OFFSET in
arch/arm64/include/asm/acpi.h. Replace its use with offsetof from
include/linux/stddef.h which should implement the same logic using
__builtin_offsetof, so that UBSAN wont warn.
Reported-by: Will Deacon <will@kernel.org>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/20200521100952.GA5360@willie-the-truck/
Link: https://lore.kernel.org/r/20200608203818.189423-1-ndesaulniers@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Allow the compat vdso (32b) to be compiled as either THUMB2 (default) or
ARM.
For THUMB2, the register r7 is reserved for the frame pointer, but
code in arch/arm64/include/asm/vdso/compat_gettimeofday.h
uses r7. Explicitly set -fomit-frame-pointer, since unwinding through
interworked THUMB2 and ARM is unreliable anyways. See also how
CONFIG_UNWINDER_FRAME_POINTER cannot be selected for
CONFIG_THUMB2_KERNEL for ARCH=arm.
This also helps toolchains that differ in their implicit value if the
choice of -f{no-}omit-frame-pointer is left unspecified, to not error on
the use of r7.
2019 Q4 ARM AAPCS seeks to standardize the use of r11 as the reserved
frame pointer register, but no production compiler that can compile the
Linux kernel currently implements this. We're actively discussing such
a transition with ARM toolchain developers currently.
Reported-by: Luis Lozano <llozano@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Manoj Gupta <manojgupta@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Stephen Boyd <swboyd@google.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Link: https://static.docs.arm.com/ihi0042/i/aapcs32.pdf
Link: https://bugs.chromium.org/p/chromium/issues/detail?id=1084372
Link: https://lore.kernel.org/r/20200608205711.109418-1-ndesaulniers@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add the missing header in file, it was lost in original implementation.
The warning message as follows:
- no previous prototype for 'patch_text_nosync' [-Wmissing-prototypes]
- no previous prototype for 'patch_text' [-Wmissing-prototypes]
Changed in v2:
- Correct the typo of commit message.
Signed-off-by: Zong Li <zong.li@sifive.com>
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The head text section (i.e. _start, secondary_start_sbi, etc) and the
init section fall under same page table level-1 mapping.
Currently, the runtime CPU hotplug is broken because we are marking
init section as non-executable which in-turn marks head text section
as non-executable.
Further investigating other architectures, it seems marking the init
section as non-executable is redundant because the init section pages
are anyway poisoned and freed.
To fix broken runtime CPU hotplug, we simply remove the code marking
the init section as non-executable.
Fixes: d27c3c90817e ("riscv: add STRICT_KERNEL_RWX support")
Cc: stable@vger.kernel.org
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The RISC-V per-HART local interrupt controller driver is mandatory
for all RISC-V system (with/without MMU) hence we force select it
for CONFIG_RISCV (just like RISCV_TIMER).
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The only thing do_IRQ() does is call handle_arch_irq function
pointer. We can very well call handle_arch_irq function pointer
directly from assembly and remove do_IRQ() function hence this
patch.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
