| Age | Commit message (Collapse) | Author |
|---|
|
Cache the root devices locally so that there are no more dependencies on
AMD_NB.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241206161210.163701-13-yazen.ghannam@amd.com
|
|
Use guard(mutex) and convert PCI error codes to common ones.
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241206161210.163701-12-yazen.ghannam@amd.com
|
|
SMN access was bolted into amd_nb mostly as convenience. This has
limitations though that require incurring tech debt to keep it working.
Move SMN access to the newly introduced AMD Node driver.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> # pdx86
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> # PMF, PMC
Link: https://lore.kernel.org/r/20241206161210.163701-11-yazen.ghannam@amd.com
|
|
amd_pci_dev_to_node_id() tries to find the AMD node ID of a device by
searching and counting devices.
The AMD node ID of an AMD node device is simply its slot number minus
the AMD node 0 slot number.
Simplify this function and move it to k10temp.c.
[ Yazen: Update commit message and simplify function. ]
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241206161210.163701-10-yazen.ghannam@amd.com
|
|
Use the newly introduced helper function to look up "function 3". Drop
unused PCI IDs and code.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250107222847.3300430-8-yazen.ghannam@amd.com
|
|
Currently, the total AMD node count is determined by searching and counting
CPU/node devices using PCI IDs.
However, AMD node information is already available through topology
CPUID/MSRs. The recent topology rework has made this info easier to access.
Replace the node counting code with a simple product of topology info.
Every node/northbridge is expected to have a 'misc' device. Clear everything
out if a 'misc' device isn't found on a node.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250107222847.3300430-7-yazen.ghannam@amd.com
|
|
The "root" device search was introduced to support SMN access for Zen
systems. This device represents a PCIe root complex. It is not the
same as the "CPU/node" devices found at slots 0x18-0x1F.
There may be multiple PCIe root complexes within an AMD node. Such is
the case with server or High-end Desktop (HEDT) systems, etc. Therefore
it is not enough to assume "root <-> AMD node" is a 1-to-1 association.
Currently, this is handled by skipping "extra" root complexes during the
search. However, the hardware provides the PCI bus number of an AMD
node's root device.
Use the hardware info to get the root device's bus and drop the extra
search code and PCI IDs.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241206161210.163701-7-yazen.ghannam@amd.com
|
|
Use the newly added helper function to look up a CPU/Node function to
find "function 4" devices.
Thus, avoid the need to regularly add new PCI IDs for basic discovery.
The unique PCI IDs are still useful in case of quirks or functional
changes. And they should be used only in such a manner.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241206161210.163701-6-yazen.ghannam@amd.com
|
|
The "AMD Node" concept spans many families of systems and applies to
a number of subsystems and drivers.
Currently, the AMD Northbridge code is overloaded with AMD node
functionality. However, the node concept is broader than just
northbridges.
Start files to host common AMD node functions and definitions. Include
a helper to find an AMD node device function based on the convention
described in AMD documentation.
Anything that needs node functionality should include this rather than
amd_nb.h. The AMD_NB code will be reduced to only northbridge-specific
code needed for legacy systems.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241206161210.163701-5-yazen.ghannam@amd.com
|
|
The check for early_is_amd_nb() is only useful for systems with GART or
the NB_CFG register.
Zen-based systems (both AMD and Hygon) have neither, so return early for
them.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241206161210.163701-4-yazen.ghannam@amd.com
|
|
The code implicitly operates on AMD-based systems by matching on PCI
IDs. However, the use of these IDs is going away.
Add an explicit CPU vendor check instead of relying on PCI IDs.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241206161210.163701-3-yazen.ghannam@amd.com
|
|
This adds USB and USB-PHY related nodes for RK3576 SoC.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Link: https://lore.kernel.org/r/20250107074911.550057-5-kever.yang@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
rk3576 has two naneng combo phys:
- combophy0 is used for one of pcie and sata;
- combophy1 is used for one of pcie, sata and usb3;
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Link: https://lore.kernel.org/r/20250107074911.550057-2-kever.yang@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Commit facbe7092f8a ("arm64: dts: marvell: Drop undocumented SATA phy names")
drops some phy-names from devicetrees but misses some. Drop them too.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
The ahci-platform binding requires phys/target-supply property.
After converting the binding to yaml the following files
reporting "'anyOf' conditional failed" on
sata@540000: sata-port@0
armada-7040-db.dts
armada-8040-clearfog-gt-8k.dts
armada-8040-mcbin.dts
armada-8040-mcbin-singleshot.dts
cn9130-db.dts
cn9130-db-B.dts
cn9131-db.dts
cn9131-db-B.dts
cn9132-db.dts
cn9132-db-B.dts
the following files reporting 'anyOf' conditional failed on
sata@540000: sata-port@1
cn9132-db.dts
cn9132-db-B.dts
cn9130-crb-B.dts
'phys' is a required property
'target-supply' is a required property
>From schema: Documentation/devicetree/bindings/ata/ahci-platform.yaml
This is caused by defining sata-ports incomplete in armada-cp11x.dtsi
and overriding only a subset of ports with the needed
phys/target-supply property.
Fix this by disabling the node-templates and enabling the needed nodes.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Remove includes of linux/hyperv.h, mshyperv.h, and hyperv-tlfs.h where
they are not used.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Link: https://lore.kernel.org/r/1732577084-2122-3-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1732577084-2122-3-git-send-email-nunodasneves@linux.microsoft.com>
|
|
Marvell CN913x platforms use common phy framework for configuring and
linking serdes lanes according to their usage.
Each CP (X) features 5 serdes lanes (Y) represented by cpX_comphyY
nodes.
CN9131 SolidWAN uses CP1 serdes lanes 3 and 5 for eth1 and eth2 of CP1
respectively. Devicetree however wrongly links from these ports to the
comphy of CP0.
Replace the wrong links to cp0_comphy with cp1_comphy inside cp1_eth1,
cp1_eth2.
Fixes: 1280840d2030 ("arm64: dts: add description for solidrun cn9131 solidwan board")
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Qualcomm IP catalog says that all CAMSS interrupts is edge rising,
fix it in the CAMSS device tree node for sm8250 SoC.
Fixes: 30325603b910 ("arm64: dts: qcom: sm8250: camss: Add CAMSS block definition")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20241127122950.885982-7-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Qualcomm IP catalog says that all CAMSS interrupts is edge rising,
fix it in the CAMSS device tree node for sdm845 SoC.
Fixes: d48a6698a6b7 ("arm64: dts: qcom: sdm845: Add CAMSS ISP node")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20241127122950.885982-6-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Qualcomm IP catalog says that all CAMSS interrupts are edge rising,
fix it in the CAMSS device tree node for sc8280xp SoC.
Fixes: 5994dd60753e ("arm64: dts: qcom: sc8280xp: camss: Add CAMSS block definition")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241127122950.885982-5-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable primary USB controller on QCS8300 Ride platform. The primary USB
controller is made "peripheral", as this is intended to be connected to
a host for debugging use cases.
For using the controller in host mode, changing the dr_mode and adding
appropriate pinctrl nodes to provide vbus would be sufficient.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241114055152.1562116-3-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for USB controllers on QCS8300. The second
controller is only High Speed capable.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241114055152.1562116-2-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for GPU, Video, Camera and Display clock controllers on
Qualcomm QCS8300 platform.
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Link: https://lore.kernel.org/r/20241114-qcs8300-mm-cc-dt-patch-v1-1-7a974508c736@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add coresight components on Qualcomm SM8450 Soc. The components include
TMC ETF/ETR, ETE, STM, TPDM, CTI.
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Link: https://lore.kernel.org/r/20250107090031.3319-3-quic_jinlmao@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The CMN PLL hardware block is available in the Qualcomm IPQ SoC such
as IPQ9574 and IPQ5332. It provides fixed rate output clocks to Ethernet
related hardware blocks such as external Ethernet PHY or switch. This
driver is initially being enabled for IPQ9574. All boards based on
IPQ9574 SoC will require to include this driver in the build.
This CMN PLL hardware block does not provide any other specific function
on the IPQ SoC other than enabling output clocks to Ethernet related
devices.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20250103-qcom_ipq_cmnpll-v8-3-c89fb4d4849d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
For both the controller instances, size of the 'addr_space' region should
be 0x1fe00000 as per the hardware memory layout.
Otherwise, endpoint drivers cannot request even reasonable BAR size of 1MB.
Cc: stable@vger.kernel.org # 6.11
Fixes: c5f5de8434ec ("arm64: dts: qcom: sa8775p: Add ep pcie1 controller node")
Fixes: 1924f5518224 ("arm64: dts: qcom: sa8775p: Add ep pcie0 controller node")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20241231130224.38206-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable UFS on the Qualcomm QCS615 Ride platform.
Signed-off-by: Sayali Lokhande <quic_sayalil@quicinc.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Co-developed-by: Xin Liu <quic_liuxin@quicinc.com>
Signed-off-by: Xin Liu <quic_liuxin@quicinc.com>
Link: https://lore.kernel.org/r/20241216095439.531357-4-quic_liuxin@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the UFS Host Controller node and its PHY for QCS615 SoC.
Signed-off-by: Sayali Lokhande <quic_sayalil@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Co-developed-by: Xin Liu <quic_liuxin@quicinc.com>
Signed-off-by: Xin Liu <quic_liuxin@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241216095439.531357-3-quic_liuxin@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The IPQ5424 SoC has both USB2.0 and USB3.0 controllers. The USB3.0
can connect to either of USB2.0 or USB3.0 phy and operate in the
respective mode.
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241118052839.382431-7-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add a DT node for Last level cache (aka. system cache) controller
which provides control over the last level cache present on
IPQ5424 SoCs.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20241121051935.1055222-4-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Meta (Facebook) has a preference for all of our secondary flash
chips to be labelled "alt-bmc" for consistency of userspace tools
deal with updates. Bletchley, Harma, Minerva, and Catalina all
follow this convention but for some reason Yosemite4 is different.
Adjust the label in the dts to match the other platforms.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://patch.msgid.link/20250107162726.232402-1-patrick@stwcx.xyz
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
|
The x86 shadow stack support has its own set of registers. Those registers
are XSAVE-managed, but they are "supervisor state components" which means
that userspace can not touch them with XSAVE/XRSTOR. It also means that
they are not accessible from the existing ptrace ABI for XSAVE state.
Thus, there is a new ptrace get/set interface for it.
The regset code that ptrace uses provides an ->active() handler in
addition to the get/set ones. For shadow stack this ->active() handler
verifies that shadow stack is enabled via the ARCH_SHSTK_SHSTK bit in the
thread struct. The ->active() handler is checked from some call sites of
the regset get/set handlers, but not the ptrace ones. This was not
understood when shadow stack support was put in place.
As a result, both the set/get handlers can be called with
XFEATURE_CET_USER in its init state, which would cause get_xsave_addr() to
return NULL and trigger a WARN_ON(). The ssp_set() handler luckily has an
ssp_active() check to avoid surprising the kernel with shadow stack
behavior when the kernel is not ready for it (ARCH_SHSTK_SHSTK==0). That
check just happened to avoid the warning.
But the ->get() side wasn't so lucky. It can be called with shadow stacks
disabled, triggering the warning in practice, as reported by Christina
Schimpe:
WARNING: CPU: 5 PID: 1773 at arch/x86/kernel/fpu/regset.c:198 ssp_get+0x89/0xa0
[...]
Call Trace:
<TASK>
? show_regs+0x6e/0x80
? ssp_get+0x89/0xa0
? __warn+0x91/0x150
? ssp_get+0x89/0xa0
? report_bug+0x19d/0x1b0
? handle_bug+0x46/0x80
? exc_invalid_op+0x1d/0x80
? asm_exc_invalid_op+0x1f/0x30
? __pfx_ssp_get+0x10/0x10
? ssp_get+0x89/0xa0
? ssp_get+0x52/0xa0
__regset_get+0xad/0xf0
copy_regset_to_user+0x52/0xc0
ptrace_regset+0x119/0x140
ptrace_request+0x13c/0x850
? wait_task_inactive+0x142/0x1d0
? do_syscall_64+0x6d/0x90
arch_ptrace+0x102/0x300
[...]
Ensure that shadow stacks are active in a thread before looking them up
in the XSAVE buffer. Since ARCH_SHSTK_SHSTK and user_ssp[SHSTK_EN] are
set at the same time, the active check ensures that there will be
something to find in the XSAVE buffer.
[ dhansen: changelog/subject tweaks ]
Fixes: 2fab02b25ae7 ("x86: Add PTRACE interface for shadow stack")
Reported-by: Christina Schimpe <christina.schimpe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Christina Schimpe <christina.schimpe@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250107233056.235536-1-rick.p.edgecombe%40intel.com
|
|
Specify the dimensions of the touchscreen propertly so that
no userspace configuration is needed for it.
Tested with x11 and weston on Debian bookworm.
What is in now is some debris from earlier tries to handle
scaling in kernel:
https://lore.kernel.org/linux-input/cover.1482936802.git.hns@goldelico.com/
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20241205204413.2466775-3-akemnade@kernel.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
According to the TRM [0] in 21.5.1.42 UART_SYSC Register,
the autoidle bit should not be set for UART, so remove the
appropriate SYSC_OMAP2_AUTOIDLE flag.
[0] https://www.ti.com/lit/ug/spruhl7i/spruhl7i.pdf
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Sukrut Bellary <sbellary@baylibre.com>
Link: https://lore.kernel.org/r/20241220223523.2125278-1-jm@ti.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Despite CM_IDLEST1_CORE and CM_FCLKEN1_CORE behaving normal,
disabling SPI leads to messages like when suspending:
Powerdomain (core_pwrdm) didn't enter target state 0
and according to /sys/kernel/debug/pm_debug/count off state is not
entered. That was not connected to SPI during the discussion
of disabling SPI. See:
https://lore.kernel.org/linux-omap/20230122100852.32ae082c@aktux/
The reason is that SPI is per default in slave mode. Linux driver
will turn it to master per default. It slave mode, the powerdomain seems to
be kept active if active chip select input is sensed.
Fix that by explicitly disabling the SPI3 pins which used to be muxed by
the bootloader since they are available on an optionally fitted header
which would require dtb overlays anyways.
Fixes: a622310f7f01 ("ARM: dts: gta04: fix excess dma channel usage")
CC: stable@vger.kernel.org
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20241204174152.2360431-1-andreas@kemnade.info
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
In SNP guest environment with Secure TSC enabled, unlike other clock sources
(such as HPET, ACPI timer, APIC, etc), the RDTSC instruction is handled
without causing a VM exit, resulting in minimal overhead and jitters. Even
when the host CPU's TSC is tampered with, the Secure TSC enabled guest keeps
on ticking forward. Hence, mark Secure TSC as the only reliable clock source,
bypassing unstable calibration.
[ bp: Massage. ]
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Peter Gonda <pgonda@google.com>
Link: https://lore.kernel.org/r/20250106124633.1418972-10-nikunj@amd.com
|
|
The hypervisor should not be intercepting RDTSC/RDTSCP when Secure TSC is
enabled. A #VC exception will be generated if the RDTSC/RDTSCP instructions
are being intercepted. If this should occur and Secure TSC is enabled,
guest execution should be terminated as the guest cannot rely on the TSC
value provided by the hypervisor.
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Peter Gonda <pgonda@google.com>
Link: https://lore.kernel.org/r/20250106124633.1418972-9-nikunj@amd.com
|
|
The hypervisor should not be intercepting GUEST_TSC_FREQ MSR(0xcOO10134)
when Secure TSC is enabled. A #VC exception will be generated otherwise. If
this should occur and Secure TSC is enabled, terminate guest execution.
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250106124633.1418972-8-nikunj@amd.com
|
|
Secure TSC enabled guests should not write to the MSR_IA32_TSC (0x10) register
as the subsequent TSC value reads are undefined. On AMD, MSR_IA32_TSC is
intercepted by the hypervisor by default. MSR_IA32_TSC read/write accesses
should not exit to the hypervisor for such guests.
Accesses to MSR_IA32_TSC need special handling in the #VC handler for the
guests with Secure TSC enabled. Writes to MSR_IA32_TSC should be ignored and
flagged once with a warning, and reads of MSR_IA32_TSC should return the
result of the RDTSC instruction.
[ bp: Massage commit message. ]
Suggested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250106124633.1418972-7-nikunj@amd.com
|
|
Add support for Secure TSC in SNP-enabled guests. Secure TSC allows guests
to securely use RDTSC/RDTSCP instructions, ensuring that the parameters used
cannot be altered by the hypervisor once the guest is launched.
Secure TSC-enabled guests need to query TSC information from the AMD Security
Processor. This communication channel is encrypted between the AMD Security
Processor and the guest, with the hypervisor acting merely as a conduit to
deliver the guest messages to the AMD Security Processor. Each message is
protected with AEAD (AES-256 GCM).
[ bp: Zap a stray newline over amd_cc_platform_has() while at it,
simplify CC_ATTR_GUEST_SNP_SECURE_TSC check ]
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250106124633.1418972-6-nikunj@amd.com
|
|
Add device tree support for the SAMA7D65 Curiosity board.
Update the Makefile to include the new device tree file.
uart6 is related to flexcom6, hence not sorted in alphabetical order.
Signed-off-by: Romain Sioen <romain.sioen@microchip.com>
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/20250107160850.120537-6-Ryan.Wanner@microchip.com
[claudiu.beznea: moved chosen node after alias for aphanumerically
sortage, added a space in front of <PIN_PD19__FLEXCOM6_IO1> for
alignment]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add Device Tree for sama7d65 SoC.
Co-developed-by: Dharma Balasubiramani <dharma.b@microchip.com>
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Co-developed-by: Romain Sioen <romain.sioen@microchip.com>
Signed-off-by: Romain Sioen <romain.sioen@microchip.com>
Co-developed-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20250107160850.120537-5-Ryan.Wanner@microchip.com
[claudiu.beznea: dropped comma typo from copyright, dropped space in
front of slow_xtal node, dropped empty space after slow_xtal node]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
In commit 892f7237b3ff ("arm64: Delay initialisation of
cpuinfo_arm64::reg_{zcr,smcr}") we moved access to ZCR, SMCR and SMIDR
later in the boot process in order to ensure that we don't attempt to
interact with them if SVE or SME is disabled on the command line.
Unfortunately when initialising the boot CPU in init_cpu_features() we work
on a copy of the struct cpuinfo_arm64 for the boot CPU used only during
boot, not the percpu copy used by the sysfs code. The expectation of the
feature identification code was that the ID registers would be read in
__cpuinfo_store_cpu() and the values not modified by init_cpu_features().
The main reason for the original change was to avoid early accesses to
ZCR on practical systems that were seen shipping with SVE reported in ID
registers but traps enabled at EL3 and handled as fatal errors, SME was
rolled in due to the similarity with SVE. Since then we have removed the
early accesses to ZCR and SMCR in commits:
abef0695f9665c3d ("arm64/sve: Remove ZCR pseudo register from cpufeature code")
391208485c3ad50f ("arm64/sve: Remove SMCR pseudo register from cpufeature code")
so only the SMIDR_EL1 part of the change remains. Since SMIDR_EL1 is
only trapped via FEAT_IDST and not the SME trap it is less likely to be
affected by similar issues, and the factors that lead to issues with SVE
are less likely to apply to SME.
Since we have not yet seen practical SME systems that need to use a
command line override (and are only just beginning to see SME systems at
all) and the ID register read is much more likely to be safe let's just
store SMIDR_EL1 along with all the other ID register reads in
__cpuinfo_store_cpu().
This issue wasn't apparent when testing on emulated platforms that do not
report values in SMIDR_EL1.
Fixes: 892f7237b3ff ("arm64: Delay initialisation of cpuinfo_arm64::reg_{zcr,smcr}")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241217-arm64-fix-boot-cpu-smidr-v3-1-7be278a85623@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Commit 2045a3b8911b ("mm/sparse-vmemmap: generalise vmemmap_populate_hugepages()")
introduces the vmemmap_check_pmd() while does not verify if the entry is a
section mapping, as is already done for Loongarch & X86.
The update includes a check for pmd_sect(). Only if pmd_sect() returns true,
further vmemmap population for the addr is skipped.
Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250102074047.674156-1-quic_zhenhuah@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
[pgd|p4d]_bad() helpers have open encodings for their respective table bits
which can be replaced with corresponding macros. This makes things clearer,
thus improving their readability as well.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20250107015529.798319-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
pte_present() is no longer synonymous with pte_valid() as it also tests for
pte_present_invalid() as well. Hence pte_mkpresent() is misleading, because
all that does is make an entry mapped, via setting PTE_VALID. Hence rename
the helper as pte_mkvalid() which reflects its functionality appropriately.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250107023016.829416-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add coresight components: Funnel, ETE and ETF for SM8650.
Signed-off-by: Yuanfang Zhang <quic_yuanfang@quicinc.com>
Link: https://lore.kernel.org/r/20250107-sm8650-cs-dt-v4-1-2113b18754ea@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Back when the CRD support was brought up, the usb_2 controller didn't
have anything connected to it in order to test it properly, so it was
never enabled.
On the Lenovo ThinkPad T14s, the usb_2 controller has the fingerprint
controller connected to it. So enabling it, proved that the interrupts
lines were wrong from the start.
Fix both the pwr_event and the DWC ctrl_irq lines, according to
documentation.
Fixes: 4af46b7bd66f ("arm64: dts: qcom: x1e80100: Add USB nodes")
Cc: stable@vger.kernel.org # 6.9
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250107-x1e80100-fix-usb2-controller-irqs-v1-1-4689aa9852a7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On Lenovo ThinkPad T14s, the fingerprint reader placed in the power
button is connected via the usb_2 controller. The controller has only
a USB 2.0 PHY which is then connected via a NXP PTN3222 eUSB2 repeater,
which in turn is connected to the Goodix fingerprint reader.
So enable all the usb_2 controller and PHY nodes, set dual-role mode to
host and describe the eUSB2 repeater in order to get the fingerprint
reader discovered.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250107-x1e80100-t14-enable-fingerprint-sensor-v1-1-8fd911d39ad1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable necessary drivers for booting Qualcomm SM8750 based boards like
MTP8750 and QRD8750. The clock controller (GCC), interconnect and
pinctrl drivers are considered necessary for early boot debugging, e.g.
via serial console, thus make them built-in.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250107155452.389154-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
