| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200508043408.886394-3-npiggin@gmail.com
|
|
The architecture allows for machine check exceptions to cause idle
wakeups which resume at the 0x200 address which has to return via
the idle wakeup code, but the early machine check handler is run
first.
The case of a no state-loss sleep is broken because the early
handler uses non-volatile register r1 , which is needed for the wakeup
protocol, but it is not restored.
Fix this by loading r1 from the MCE exception frame before returning
to the idle wakeup code. Also update the comment which has become
stale since the idle rewrite in C.
This crash was found and fix confirmed with a machine check injection
test in qemu powernv model (which is not upstream in qemu yet).
Fixes: 10d91611f426d ("powerpc/64s: Reimplement book3s idle code in C")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200508043408.886394-2-npiggin@gmail.com
|
|
EEH device state is currently removed (by eeh_remove_device()) during
the device release handler, which is invoked as the device's reference
count drops to zero. This may take some time, or forever, as other
threads may hold references.
However, the PCI device state is released synchronously by
pci_stop_and_remove_bus_device(). This mismatch causes problems, for
example the device may be re-discovered as a new device before the
release handler has been called, leaving the PCI and EEH state
mismatched.
So instead, call eeh_remove_device() from the bus device removal
handlers, which are called synchronously in the removal path.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0a1f5105d3a33b1c090bba31de63eb0cdd25de7b.1588045502.git.sbobroff@linux.ibm.com
|
|
If a device is hot unplgged during EEH recovery, it's possible for the
RTAS call to ibm,configure-pe in pseries_eeh_configure() to return
parameter error (-3), however negative return values are not checked
for and this leads to an infinite loop.
Fix this by correctly bailing out on negative values.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Link: https://lore.kernel.org/r/1b0a6010a647dc915816e44845b64d72066676a7.1588045502.git.sbobroff@linux.ibm.com
|
|
Currently we don't report anything useful in /proc/<pid>/status:
$ grep Speculation_Store_Bypass /proc/self/status
Speculation_Store_Bypass: unknown
Our mitigation is currently always a barrier instruction, which
doesn't map that well onto the existing possibilities for the PR_SPEC
values.
However even if we added a "barrier" type PR_SPEC value, userspace
would still need to consult some other source to work out which type
of barrier to use. So reporting "vulnerable" seems sufficient, as
userspace can see that and then consult its source to determine what
barrier to use.
Signed-off-by: Gustavo Walbon <gwalbon@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200402124929.3574166-1-mpe@ellerman.id.au
|
|
semantic conflict
Resolve structural conflict between:
59566b0b622e: ("x86/ftrace: Have ftrace trampolines turn read-only at the end of system boot up")
which introduced a new reference to 'ftrace_epilogue', and:
0298739b7983: ("x86,ftrace: Fix ftrace_regs_caller() unwind")
Which renamed it to 'ftrace_caller_end'. Rename the new usage site in the merge commit.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Remove an old macro that no longer exists anywhere else in the tree
that snuck in when IP30 support was added
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
After commit 87fcfa7b7fe6 ("MIPS: Loongson64: Add generic dts"),
there already exists the node and property of Loongson CPU UART0
in loongson3-package.dtsi:
cpu_uart0: serial@1fe001e0 {
compatible = "ns16550a";
reg = <0 0x1fe001e0 0x8>;
clock-frequency = <33000000>;
interrupt-parent = <&liointc>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
no-loopback-test;
};
In order to support for serial console on the Loongson platform,
add CONFIG_SERIAL_OF_PLATFORM=y to loongson3_defconfig.
With this patch, we can see the following boot messages:
[ 1.877745] printk: console [ttyS0] disabled
[ 1.881979] 1fe001e0.serial: ttyS0 at MMIO 0x1fe001e0 (irq = 16, base_baud = 2062500) is a 16550A
[ 1.890838] printk: console [ttyS0] enabled
And also, we can login normally from the serial console.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
We do need access_process_vm() to access the target's reg_window.
However, access to caller's memory (storing the result in
genregs32_get(), fetching the new values in case of genregs32_set())
should be done by normal uaccess primitives.
Fixes: ad4f95764040 ([SPARC64]: Fix user accesses in regset code.)
Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This adds touchscreen support to the Ux500 Samsung
GT-S7710 "Skomer" mobile phone.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200516212913.485365-1-linus.walleij@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 stack unwinding fix from Thomas Gleixner:
"A single bugfix for the ORC unwinder to ensure that the error flag
which tells the unwinding code whether a stack trace can be trusted or
not is always set correctly.
This was messed up by a couple of changes in the recent past"
* tag 'objtool-urgent-2020-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Fix error handling in __unwind_start()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
"A single fix for early boot crashes of kernels built with gcc10 and
stack protector enabled"
* tag 'x86_urgent_for_v5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Fix early boot crash on gcc-10, third try
|
|
The GIC ITS nodes in the fastmodel DTS files were not fully binding
compliant.
Use one of the allowed node names, also add the required #msi-cells
property for the older model.
Link: https://lore.kernel.org/r/20200513103016.130417-12-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The GIC DT nodes for the fastmodels were not fully compliant with the
DT binding, which has certain expectations about child nodes and their
size and address cells values.
Use smaller #address-cells and #size-cells values, as the binding
requests, and adjust the reg properties accordingly.
This requires adjusting the interrupt nexus nodes as well, as one
field of the interrupt-map property depends on the GIC's address-size.
Since the .dts files share interrupt nexus nodes across different
interrupt controllers (GICv2 vs. GICv3), we need to use the only
commonly allowed #address-size value of <1> for both.
Link: https://lore.kernel.org/r/20200513103016.130417-11-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The GIC DT nodes for the Juno boards were not fully compliant with
the DT binding, which has certain expectations about child nodes and
their size and address cells values.
Use smaller #address-cells and #size-cells values, as the binding
requests, and adjust the reg properties accordingly.
This requires adjusting the interrupt nexus nodes as well, as one
field of the interrupt-map property depends on the GIC's address-size.
Link: https://lore.kernel.org/r/20200513103016.130417-10-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The GIC DT binding only allows certain combinations of DT compatible
strings. The somewhat awkward "arm,cortex-a15-gic", "arm,cortex-a9-gic"
is not among those.
Drop that combination of different "cortex" based strings used for the
models, and replace it with the more useful combination including
"arm,gic-400".
Link: https://lore.kernel.org/r/20200513103016.130417-9-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The Juno's mem-timer DT node was not fully compliant with the DT binding,
which has certain expectation about child nodes and their size and
address cells values.
Use a cell size of 1, as the binding requests, and spell out the ranges
property to be binding compliant.
Link: https://lore.kernel.org/r/20200513103016.130417-8-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The devicetree compiler complains when DT nodes without a reg property
live inside a (simple) bus node:
Warning (simple_bus_reg): Node /bus@8000000/v2m_refclk32khz
missing or empty reg/ranges property
Move the fixed clocks, the fixed regulator, and the gpio keys to the
root node, since they do not depend on any busses.
Link: https://lore.kernel.org/r/20200513103016.130417-7-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The devicetree compiler complains when DT nodes without a reg property
live inside a (simple) bus node:
Warning (simple_bus_reg): Node /bus@8000000/v2m_refclk32khz
missing or empty reg/ranges property
Move the fixed clocks to the root node, since they do not depend on any
busses.
Link: https://lore.kernel.org/r/20200513103016.130417-6-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The devicetree compiler complains when DT nodes without a reg property
live inside a (simple) bus node:
Warning (simple_bus_reg): Node /bus@8000000/motherboard-bus/refclk32khz
missing or empty reg/ranges property
Move the fixed clocks, the fixed regulator, the leds and the config bus
subtree to the root node, since they do not depend on any busses.
Link: https://lore.kernel.org/r/20200513103016.130417-5-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The sfp compatible should be 'sff,sfp', not 'sff,sfp+'. We used patched
kernel where the latter was working.
Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
The devicetree compiler complains when DT nodes without a reg property
live inside a (simple) bus node:
Warning (simple_bus_reg): Node /bus@8000000/motherboard-bus/v2m_refclk32khz
missing or empty reg/ranges property
Move the fixed clocks, the fixed regulator, and the config bus subtree
to the root node, since they do not depend on any busses.
Link: https://lore.kernel.org/r/20200513103016.130417-4-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Use sdhci-caps-mask to forbid SDR104 mode on the SDIO capable SDHCI
controller. Without this the device cannot pass electromagnetic
interference certifications.
Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
The Arm Ltd. boards were using an outdated address convention in the DT
node names, by separating the high from the low 32-bits of an address by
a comma.
Remove the comma from the node name suffix to be DT spec compliant.
Link: https://lore.kernel.org/r/20200513103016.130417-3-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The NV+ v2 has a WH1602 LCD panel (which is just a rebranded HD44780),
similar to the Netgear RN104, just with different GPIO assignments.
Signed-off-by: Brian J. Tarricone <brian@tarricone.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
This patch adds dts for the Check Point L-50 from 600/1100 series
routers.
Specification:
-CPU: Marvell Kirkwood 88F6821 1200MHz
-RAM: 512MB
-Flash: NAND 512MB
-WiFi: mPCIe card based on Atheros AR9287 b/g/n
-WAN: 1 Gigabit Port (Marvell 88E1116R PHY)
-LAN: 9 Gigabit Ports (2x Marvell 88E6171(5+4))
-USB: 2x USB2.0
-Express card slot
-SD card slot
-Serial console: RJ-45 115200 8n1
-Unsupported DSL
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
The timeout-ms property for i2c master nodes is undocumented, and as
never been supported. Drop it.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
The timeout-ms property for i2c master nodes is undocumented, and as
never been supported. Drop it.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Move the max-link-speed property of the PCIe node from board specific
device tree files to the generic armada-37xx.dtsi.
Armada 37xx supports only PCIe gen2 speed so max-link-speed property
should be in the generic armada-37xx.dtsi file.
Signed-off-by: Pali Rohár <pali@kernel.org>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Move the comphy handle property of the PCIe node from board specific
device tree files (EspressoBin and Turris Mox) to the generic
armada-37xx.dtsi.
This is correct since this is the only possible PCIe PHY configuration
on Armada 37xx, so when PCIe is enabled on any board, this handle is
correct.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
We found out that we are unable to control the PERST# signal via the
default pin dedicated to be PERST# pin (GPIO2[3] pin) on A3700 SOC when
this pin is in EP_PCIE1_Resetn mode. There is a register in the PCIe
register space called PERSTN_GPIO_EN (D0088004[3]), but changing the
value of this register does not change the pin output when measuring
with voltmeter.
We do not know if this is a bug in the SOC, or if it works only when
PCIe controller is in a certain state.
Commit f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready
before training link") says that when this pin changes pinctrl mode
from EP_PCIE1_Resetn to GPIO, the PERST# signal is asserted for a brief
moment.
So currently the situation is that on A3700 boards the PERST# signal is
asserted in U-Boot (because the code in U-Boot issues reset via this pin
via GPIO mode), and then in Linux by the obscure and undocumented
mechanism described by the above mentioned commit.
We want to issue PERST# signal in a known way, therefore this patch
changes the pcie_reset_pin function from "pcie" to "gpio" and adds the
reset-gpios property to the PCIe node in device tree files of
EspressoBin and Armada 3720 Dev Board (Turris Mox device tree already
has this property and uDPU does not have a PCIe port).
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Remi Pommarel <repk@triplefau.lt>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Update the SolidRun Armada 8040 platforms phy interface types from the
old 10gbase-kr to the newer and more correct 10gbase-r.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Add "fsl,imx6sx-fec" compatible string for fec node, then
i.MX8MP EVK ethernet function can work now.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
User space checkpoint and restart tool (CRIU) needs the page's change
to be soft tracked. This allows to do a pre checkpoint and then dump
only touched pages.
Signed-off-by: Guoyun Sun <sunguoyun@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
These are exposed to userland alternatively via the new CPUCFG
instruction on Loongson-3A R4 and above. Add definitions for readback
on older cores.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Add the constants for easier and maintainable composition of CPUCFG
values.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Fix some symbol names to align with Loongson's User Manual wording. Also
correct the comment in csr_readq() suggesting the wrong instruction in
use.
Fixes: 6a6f9b7dafd50efc ("MIPS: Loongson: Add CFUCFG&CSR support")
Signed-off-by: WANG Xuerui <git@xen0n.name>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
When CONFIG_HAVE_STD_PC_SERIAL_PORT is set, there exists build errors
of 8250-platform.c due to linux/module.h is not included.
CONFIG_HAVE_STD_PC_SERIAL_PORT is not used in arch/mips for many years,
8250-platform.c is also not built and used, so it is not necessary to
fix the build errors, just remove the not used file 8250-platform.c and
the related code in Kconfig and Makefile.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
When ATI Radeon GPU driver has been compiled directly into the kernel
instead of as a module, we should make sure the firmware for the model
(check available ones in /lib/firmware/radeon) is built-in to the kernel
as well, otherwise there exists the following fatal error during GPU init,
change CONFIG_DRM_RADEON=y to CONFIG_DRM_RADEON=m to fix it.
[ 1.900997] [drm] Loading RS780 Microcode
[ 1.905077] radeon 0000:01:05.0: Direct firmware load for radeon/RS780_pfp.bin failed with error -2
[ 1.914140] r600_cp: Failed to load firmware "radeon/RS780_pfp.bin"
[ 1.920405] [drm:r600_init] *ERROR* Failed to load firmware!
[ 1.926069] radeon 0000:01:05.0: Fatal error during GPU init
[ 1.931729] [drm] radeon: finishing device.
Fixes: 024e6a8b5bb1 ("MIPS: Loongson: Add a Loongson-3 default config file")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Pull kvm fixes from Paolo Bonzini:
"A new testcase for guest debugging (gdbstub) that exposed a bunch of
bugs, mostly for AMD processors. And a few other x86 fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix off-by-one error in kvm_vcpu_ioctl_x86_setup_mce
KVM: x86: Fix pkru save/restore when guest CR4.PKE=0, move it to x86.c
KVM: SVM: Disable AVIC before setting V_IRQ
KVM: Introduce kvm_make_all_cpus_request_except()
KVM: VMX: pass correct DR6 for GD userspace exit
KVM: x86, SVM: isolate vcpu->arch.dr6 from vmcb->save.dr6
KVM: SVM: keep DR6 synchronized with vcpu->arch.dr6
KVM: nSVM: trap #DB and #BP to userspace if guest debugging is on
KVM: selftests: Add KVM_SET_GUEST_DEBUG test
KVM: X86: Fix single-step with KVM_SET_GUEST_DEBUG
KVM: X86: Set RTM for DB_VECTOR too for KVM_EXIT_DEBUG
KVM: x86: fix DR6 delivery for various cases of #DB injection
KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- A fix for unrecoverable SLB faults in the interrupt exit path,
introduced by the recent rewrite of interrupt exit in C.
- Four fixes for our KUAP (Kernel Userspace Access Prevention) support
on 64-bit. These are all fairly minor with the exception of the
change to evaluate the get/put_user() arguments before we enable user
access, which reduces the amount of code we run with user access
enabled.
- A fix for our secure boot IMA rules, if enforcement of module
signatures is enabled at runtime rather than build time.
- A fix to our 32-bit VDSO clock_getres() which wasn't falling back to
the syscall for unknown clocks.
- A build fix for CONFIG_PPC_KUAP_DEBUG on 32-bit BookS, and another
for 40x.
Thanks to: Christophe Leroy, Hugh Dickins, Nicholas Piggin, Aurelien
Jarno, Mimi Zohar, Nayna Jain.
* tag 'powerpc-5.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/40x: Make more space for system call exception
powerpc/vdso32: Fallback on getres syscall when clock is unknown
powerpc/32s: Fix build failure with CONFIG_PPC_KUAP_DEBUG
powerpc/ima: Fix secure boot rules in ima arch policy
powerpc/64s/kuap: Restore AMR in fast_interrupt_return
powerpc/64s/kuap: Restore AMR in system reset exception
powerpc/64/kuap: Move kuap checks out of MSR[RI]=0 regions of exit code
powerpc/64s: Fix unrecoverable SLB crashes due to preemption check
powerpc/uaccess: Evaluate macro arguments once, before user access is allowed
|
|
Pull csky updates from Guo Ren:
- fix for copy_from/to_user (a hard-to-find bug, thx Viro)
- fix for calltrace panic without FRAME_POINT
- two fixes for perf
- two build fixes
- four fixes for non-fatal bugs (msa, rm dis_irq, cleanup psr,
gdbmacros.txt)
* tag 'csky-for-linus-5.7-rc6' of git://github.com/c-sky/csky-linux:
csky: Fixup raw_copy_from_user()
csky: Fixup gdbmacros.txt with name sp in thread_struct
csky: Fixup remove unnecessary save/restore PSR code
csky: Fixup remove duplicate irq_disable
csky: Fixup calltrace panic
csky: Fixup perf callchain unwind
csky: Fixup msa highest 3 bits mask
csky: Fixup perf probe -x hungup
csky: Fixup compile error for abiv1 entry.S
csky/ftrace: Fixup error when disable CONFIG_DYNAMIC_FTRACE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC/dt fixes from Arnd Bergmann:
"This round of fixes is almost exclusively device tree changes, with
trivial defconfig fixes and one compiler warning fix added in.
A number of patches are to fix dtc warnings, in particular on Amlogic,
i.MX and Rockchips.
Other notable changes include:
Renesas:
- Fix a wrong clock configuration on R-Mobile A1
- Fix IOMMU support on R-Car V3H
Allwinner
- Multiple audio fixes
Qualcomm
- Use a safe CPU voltage on MSM8996
- Fixes to match a late audio driver change
Rockchip:
- Some fixes for the newly added Pinebook Pro
NXP i.MX:
- Fix I2C1 pinctrl configuration for i.MX27 phytec-phycard board
- Fix imx6dl-yapp4-ursa board Ethernet connection
OMAP:
- A regression fix for non-existing can device on am534x-idk
- Fix flakey wlan on droid4 where some devices would not connect at
all because of internal pull being used with an external pull
- Fix occasional missed wake-up events on droid4 modem uart"
* tag 'arm-soc-fixes-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (51 commits)
ARM: dts: iwg20d-q7-dbcm-ca: Remove unneeded properties in hdmi@39
ARM: dts: renesas: Make hdmi encoder nodes compliant with DT bindings
arm64: dts: renesas: Make hdmi encoder nodes compliant with DT bindings
arm64: defconfig: add MEDIA_PLATFORM_SUPPORT
arm64: defconfig: ARCH_R8A7795: follow changed config symbol name
arm64: defconfig: add DRM_DISPLAY_CONNECTOR
arm64: defconfig: DRM_DUMB_VGA_DAC: follow changed config symbol name
ARM: oxnas: make ox820_boot_secondary static
ARM: dts: r8a7740: Add missing extal2 to CPG node
ARM: dts: omap4-droid4: Fix occasional lost wakeirq for uart1
ARM: dts: omap4-droid4: Fix flakey wlan by disabling internal pull for gpio
arm64: dts: allwinner: a64: Remove unused SPDIF sound card
arm64: dts: allwinner: a64: pinetab: Fix cpvdd supply name
arm64: dts: meson-g12: remove spurious blank line
arm64: dts: meson-g12b-khadas-vim3: add missing frddr_a status property
arm64: dts: meson-g12-common: fix dwc2 clock names
arm64: dts: meson-g12b-ugoos-am6: fix usb vbus-supply
arm64: dts: freescale: imx8mp: update input_val for AUDIOMIX_BIT_STREAM
ARM: dts: r7s9210: Remove bogus clock-names from OSTM nodes
ARM: dts: rockchip: fix pinctrl sub nodename for spi in rk322x.dtsi
...
|
|
Add musb nodes and usb2 phy nodes for MT2701
Signed-off-by: Min Guo <min.guo@mediatek.com>
Link: https://lore.kernel.org/r/20191211015446.11477-3-min.guo@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add a node for Mali-450.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://lore.kernel.org/r/af7b5a2e00eb3a4b6262807c378e43afd5f74779.1563867856.git.ryder.lee@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Dhrystone benchmark on Acer Chromebook R13 CB5-312T:
A72: 15698587 dps @ 1807 MHz
A53: 7598784 dps @ 1703 MHz
Signed-off-by: Ulrich Hecht <uli-qwV78thtvt0@public.gmane.org>
Link: https://lore.kernel.org/r/1563529816-3992-1-git-send-email-uli@fpond.eu
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Use non-empty ranges for usb-phy to make the layout of
its registers clearer;
Replace deprecated compatible by generic
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Fix warning:
Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-'
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20200414030815.192104-1-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Switch to SPDX license identifier for MT6797 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200222162444.11590-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
