| Age | Commit message (Collapse) | Author |
|---|
|
Since the PHY used is internal, simply set phy-mode as internal.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the TSC deadline timer is programmed really close to the deadline or
even in the past, the computation in vmx_set_hv_timer will program the
absolute target tsc value to vmcs preemption timer field w/ delta == 0,
then plays a vmentry and an upcoming vmx preemption timer fire vmexit
dance, the lapic timer injection is delayed due to this duration. Actually
the lapic timer which is emulated by hrtimer can handle this correctly.
This patch fixes it by firing the lapic timer and injecting a timer interrupt
immediately during the next vmentry if the TSC deadline timer is programmed
really close to the deadline or even in the past. This saves ~300 cycles on
the tsc_deadline_timer test of apic.flat.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move the code to cancel the hv timer into the caller, just before
it starts the hrtimer. Check availability of the hv timer in
start_hv_timer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There are many cases in which the hv timer must be canceled. Split out
a new function to avoid duplication.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/soc
Pull "Actions Semi ARM SoC for v4.13 #2" from Andreas Färber:
This adds SMP code to bring up the remaining S500 CPU cores
by reusing a helper factored out of the SPS power domains driver.
* tag 'actions-arm-soc+sps-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
ARM: owl: smp: Implement SPS power-gating for CPU2 and CPU3
soc: actions: owl-sps: Factor out owl_sps_set_pg() for power-gating
soc: actions: Add Owl SPS
dt-bindings: power: Add Owl SPS power domains
|
|
get_alt_insn() is used to read and create ARM instructions, which
are always stored in memory in little-endian order. These values
are thus correctly converted to/from native order when processed
but the pointers used to hold the address of these instructions
are declared as for native order values.
Fix this by declaring the pointers as __le32* instead of u32* and
make the few appropriate needed changes like removing the unneeded
cast '(u32*)' in front of __ALT_PTR()'s definition.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
In the flattened device tree format, all integer properties are
in big-endian order.
Here the property "kaslr-seed" is read from the fdt and then
correctly converted to native order (via fdt64_to_cpu()) but the
pointer used for this is not annotated as being for big-endian.
Fix this by declaring the pointer as fdt64_t instead of u64
(fdt64_t being itself typedefed to __be64).
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
ARM64 implementation of ip_fast_csum() do most of the work
in 128 or 64 bit and call csum_fold() to finalize. csum_fold()
itself take a __wsum argument, to insure that this value is
always a 32bit native-order value.
Fix this by adding the sadly needed '__force' to cast the native
'sum' to the type '__wsum'.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
A wide variety of TI platforms support NAND via the
CONFIG_MTD_NAND_OMAP2 driver (and related BCH options), so enable this.
In addition, multi_v7_defconfig supports the dm8168-evm and that
supports root being on a SATA drive, so build the DM816 AHCI driver into
the resulting kernel as well.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mihail Grigorov <michael.grigorov@konsulko.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/arm64
Pull "Actions Semi ARM64 SoC for v4.13" from Andreas Färber:
This adds a Kconfig symbol for DTs and drivers being added.
* tag 'actions-arm64-soc-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
arm64: Prepare Actions Semi S900
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt64
Pull "Actions Semi ARM64 based SoC DT for 4.13" from Andreas Färber:
This adds an initial DT for the S900 SoC and a devboard based on it.
* tag 'actions-arm64-dt-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
arm64: dts: Add Actions Semi S900 and Bubblegum-96
dt-bindings: Add vendor prefix for uCRobotics
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt
Pull "Actions Semi ARM based SoC DT for v4.13" from Andreas Färber:
This adds an initial DT for the S500 SoC and a devboard based on it.
* tag 'actions-arm-dt-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
ARM: dts: owl-s500: Add SPS node
ARM: dts: owl-s500: Set CPU enable-method
dt-bindings: arm: cpus: Add S500 enable-method
ARM: dts: Add Actions Semi S500 and LeMaker Guitar
dt-bindings: arm: Document Actions Semi S900
dt-bindings: timer: Document Owl timer
dt-bindings: arm: Document Actions Semi S500
dt-bindings: Add vendor prefix for Actions Semi
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/soc
Pull "Actions Semi ARM SoC for v4.13" from Andreas Färber:
This adds a Kconfig symbol and mach-actions with board and SMP code,
plus a MAINTAINERS entry.
* tag 'actions-arm-soc-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
MAINTAINERS: Update Actions Semi section with SPS
ARM: owl: Implement CPU enable-method for S500
MAINTAINERS: Add Actions Semi Owl section
ARM: Prepare Actions Semi S500
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/defconfig
Pull "Qualcomm ARM Based defconfig Updates for v4.13 - Part 2" from Andy Gross:
* Enable RPMSG_QCOM_SMD to get boards working again
* tag 'qcom-defconfig-for-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: qcom_defconfig: enable RPMSG_QCOM_SMD
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt64
Pull "Amlogic 64-bit DT changes for v4.13 (round 2)" from Kevin Hilman:
- support new SPI controller driver
- several more leaf clocks exposed to DT
- New board: S905x LibreTech CC board
* tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM64: dts: meson-gxl: Add Libre Technology CC support
dt-bindings: arm: amlogic: Add Libre Technology CC board
dt-bindings: add Libre Technology vendor prefix
ARM64: dts: meson-gx: Add SPICC nodes
clk: meson-gxbb: un-export the CPU clock
clk: meson-gxbb: expose UART clocks
clk: meson-gxbb: expose SPICC gate
clk: meson-gxbb: expose spdif master clock
clk: meson-gxbb: expose i2s master clock
clk: meson-gxbb: expose spdif clock gates
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
Merge "Amlogic 32-bit DT changes for v4.13 (round 2)" from Kevin Hilman:
- greatly expands DT clock support for meson8b
* tag 'amlogic-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (22 commits)
ARM: dts: meson: use the real ethernet clock on Meson8 and Meson8b
ARM: dts: meson8b: add the SCU device node
ARM: dts: meson: add USB support on Meson8 and Meson8b
ARM: dts: meson: add the hardware random number generator
ARM: dts: meson8: add reserved memory zones
ARM: dts: meson: add the SAR ADC
ARM: dts: meson8: add the pins for the SDIO controller
ARM: dts: meson8: add the PWM_E and PWM_F pins
ARM: dts: meson: use GIC_SPI and IRQ_TYPE_EDGE_RISING macros
ARM: dts: meson: use C preprocessor friendly include syntax
ARM: dts: meson8: fix the IR receiver pins
clk: meson8b: export the ethernet gate clock
clk: meson8b: export the USB clocks
clk: meson8b: export the gate clock for the HW random number generator
clk: meson8b: export the SDIO clock
clk: meson8b: export the SAR ADC clocks
clk: meson-gxbb: un-export the CPU clock
clk: meson-gxbb: expose UART clocks
clk: meson-gxbb: expose SPICC gate
clk: meson-gxbb: expose spdif master clock
...
|
|
Linux 4.12-rc7
|
|
Here both variables 'cpu_id' and 'entry_point' are read via
read[lq]_relaxed(), from a little-endian annotated pointer
and then used as a native endian value.
This is correct since the read[lq]() family of function
internally do a little-to-native endian conversion.
But in this case, it is wrong to declare these variable as
little-endian since there are native ones.
Fix this by changing the declaration of these variables
as 'u32' or 'u64' instead of '__le32' / '__le64'.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Here the entrypoint, declared as a 64 bit integer, is read from
a pointer to 64bit integer but the read is done via readl_relaxed()
which is for 32bit quantities.
All the high bits will thus be lost which change the meaning
of the test against zero done later.
Fix this by using readq_relaxed() instead as it should be for
64bit quantities.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Here the functions reloc_insn_movw() & reloc_insn_imm() are used
to read, modify and write back ARM instructions, which are always
stored in memory in little-endian order. These values are thus
correctly converted to/from native order but the pointers used to
hold their addresses are declared as for native order values.
Fix this by declaring the pointers as __le32* and remove the
casts that are now unneeded.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
aarch64_insn_write() is used to write an instruction.
As on ARM64 in-memory instructions are always stored
in little-endian order, this function, taking the instruction
opcode in native order, correctly convert it to little-endian
before sending it to an helper function __aarch64_insn_write()
which will do the effective write.
This is all good, but the variable and argument holding the
converted value are not annotated for a little-endian value
but left for native values.
Fix this by adjusting the prototype of the helper and
directly using the result of cpu_to_le32() without passing
by an intermediate variable (which was not a distinct one
but the same as the one holding the native value).
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The function arch64_insn_read() is used to read an instruction.
On AM64 instructions are always stored in little-endian order
and thus the function correctly do a little-to-native endian
conversion to the value just read.
However, the variable used to hold the value before the conversion
is not declared for a little-endian value but for a native one.
Fix this by using the correct type for the declaration: __le32
Note: This only works because the function reading the value,
probe_kernel_read((), takes a void pointer and void pointers
are endian-agnostic. Otherwise probe_kernel_read() should
also be properly annotated (or worse, need to be specialized).
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Here we're reading thumb or ARM instructions, which are always
stored in memory in little-endian order. These values are thus
correctly converted to native order but the intermediate value
should be annotated as for little-endian values.
Fix this by declaring the intermediate var as __le32 or __le16.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Here we're reading thumb or ARM instructions, which are always
stored in memory in little-endian order. These values are thus
correctly converted to native order but the intermediate value
should be annotated as for little-endian values.
Fix this by declaring the intermediate var as __le32 or __le16.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Sync the comment with its preprocessor constant counterpart.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Miodrag Dinic <miodrag.dinic@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16641/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
This patch adds gettimeofday_fallback() function that wraps assembly
invocation of gettimeofday() syscall using __NR_gettimeofday.
This function is used if pure VDSO implementation gettimeofday()
does not succeed for any reason. Its imeplementation is enclosed in
"#ifdef CONFIG_MIPS_CLOCK_VSYSCALL" to be in sync with the similar
arrangement for __vdso_gettimeofday().
If syscall invocation via __NR_gettimeofday fails, register a3 will
be set. So, after the syscall, register a3 is tested and the return
valuem is negated if it's set.
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16640/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
This patch adds clock_gettime_fallback() function that wraps assembly
invocation of clock_gettime() syscall using __NR_clock_gettime.
This function is used if pure VDSO implementation of clock_gettime()
does not succeed for any reason. For example, it is called if the
clkid parameter of clock_gettime() is not one of the clkids listed
in the switch-case block of the function __vdso_clock_gettime()
(one such case for clkid is CLOCK_BOOTIME).
If syscall invocation via __NR_clock_gettime fails, register a3 will
be set. So, after the syscall, register a3 is tested and the return
value is negated if it's set.
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16639/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Fix incorrect calculation in do_monotonic() and do_monotonic_coarse()
function that in turn caused incorrect values returned by the vdso
version of system call clock_gettime() on mips64 if its system clock
ID parameter was CLOCK_MONOTONIC or CLOCK_MONOTONIC_COARSE.
Consider these variables and their types on mips32 and mips64:
tk->wall_to_monotonic.tv_sec s64, s64 (kernel/vdso.c)
vdso_data.wall_to_mono_sec u32, u32 (kernel/vdso.c)
to_mono_sec u32, u32 (vdso/gettimeofday.c)
ts->tv_sec s32, s64 (vdso/gettimeofday.c)
For mips64 case, u32 vdso_data.wall_to_mono_sec variable is updated
from the 64-bit signed variable tk->wall_to_monotonic.tv_sec
(kernel/vdso.c:76) which is a negative number holding the time passed
from 1970-01-01 to the time boot started. This 64-bit signed value is
currently around 47+ years, in seconds. For instance, let this value
be:
-1489757461
or
11111111111111111111111111111111 10100111001101000001101011101011
By updating 32-bit vdso_data.wall_to_mono_sec variable, we lose upper
32 bits (signed 1's).
to_mono_sec variable is a parameter of do_monotonic() and
do_monotonic_coarse() functions which holds vdso_data.wall_to_mono_sec
value. Its value needs to be added (or subtracted considering it holds
negative value from the tk->wall_to_monotonic.tv_sec) to the current
time passed from 1970-01-01 (ts->tv_sec), which is again something like
47+ years, but increased by the time passed from the boot to the
current time. ts->tv_sec is 32-bit long in case of 32-bit architecture
and 64-bit long in case of 64-bit architecture. Consider the update of
ts->tv_sec (vdso/gettimeofday.c:55 & 167):
ts->tv_sec += to_mono_sec;
mips32 case: This update will be performed correctly, since both
ts->tv_sec and to_mono_sec are 32-bit long and the sign in to_mono_sec
is preserved. Implicit conversion from u32 to s32 will be done
correctly.
mips64 case: This update will be wrong, since the implicit conversion
will not be done correctly. The reason is that the conversion will be
from u32 to s64. This is because to_mono_sec is 32-bit long for both
mips32 and mips64 cases and s64..33 bits of converted to_mono_sec
variable will be zeros.
So, in order to make MIPS64 implementation work properly for
MONOTONIC and MONOTONIC_COARSE clock ids on mips64, the size of
wall_to_mono_sec variable in mips_vdso_data union and respective
parameters in do_monotonic() and do_monotonic_coarse() functions
should be changed from u32 to u64. Because of consistency, this
size change from u32 and u64 is also done for wall_to_mono_nsec
variable and corresponding function parameters.
As far as similar situations for other architectures are concerned,
let's take a look at arm. Arm has two distinct vdso_data structures
for 32-bit & 64-bit cases, and arm's wall_to_mono_sec and
wall_to_mono_nsec are u32 for 32-bit and u64 for 64-bit cases.
On the other hand, MIPS has only one structure (mips_vdso_data),
hence the need for changing the size of above mentioned parameters.
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16638/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Use current_cpu_type() to check for 4Kc processors instead of checking
the PRID directly. This will allow for the 4Kc case to be optimised out
of kernels that can't run on 4KC processors, thanks to __get_cpu_type()
and its unreachable() call.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16205/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
CONFIG_MIPS_PGD_C0_CONTEXT, which allows a pointer to the page directory
to be stored in the cop0 Context register when enabled, was previously
only allowed for MIPSr2. MIPSr6 is just as able to make use of it, so
allow it there too.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16204/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
In systems where there are multiple actors updating the TLB, the
potential exists for a race condition wherein a CPU hits a TLB exception
but by the time it reaches a TLBP instruction the affected TLB entry may
have been replaced. This can happen if, for example, a CPU shares the
TLB between hardware threads (VPs) within a core and one of them
replaces the entry that another has just taken a TLB exception for.
We handle this race in the case of the Hardware Table Walker (HTW) being
the other actor already, but didn't take into account the potential for
multiple threads racing. Include the code for aborting TLB exception
handling in affected multi-threaded systems, those being the I6400 &
I6500 CPUs which share TLB entries between VPs.
In the case of using RiXi without dedicated exceptions we have never
handled this race even for HTW. This patch adds WARN()s to these cases
which ought never to be hit because all CPUs with either HTW or shared
FTLB RAMs also include dedicated RiXi exceptions, but the WARN()s will
ensure this is always the case.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16203/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Some systems share FTLB RAMs or entries between sibling CPUs (ie.
hardware threads, or VP(E)s, within a core). These properties require
kernel handling in various places. As a start this patch introduces
cpu_has_shared_ftlb_ram & cpu_has_shared_ftlb_entries feature macros
which we set appropriately for I6400 & I6500 CPUs. Further patches will
make use of these macros as appropriate.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16202/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
On pre-r6 systems with the MT ASE the CPS SMP code included checks to
halt the VPE running mips_cps_boot_vpes() if its bit in the struct
core_boot_config vpe_mask field is clear. This was largely done in order
to allow us to start arbitrary VPEs within a core despite the fact that
hardware is typically configured to run only VPE0 after powering up a
core. VPE0 would start the desired other VPEs, halt itself, and the fact
that VPE0 started would be largely hidden & irrelevant.
In MIPSr6 multithreading we have control over which VPs start executing
when a core powers up via the cores CPC registers accessed remotely
through the redirect block. For this reason the MIPSr6 multithreading
path in mips_cps_boot_vpes() hasn't bothered up until now to handle
halting the VP running it.
However it is possible to power up cores entirely in hardware by using a
pwr_up pin associated with the core. Unfortunately some systems wire
this pin to a logic 1, which means that it is possible for a core to
power up at a point that software doesn't expect. The result is that we
generally go execute the kernel on a CPU that ought not to be running &
the results can be unpredictable.
Handle this case by stopping VPs that we don't expect to be running in
mips_cps_boot_vpes() - with this change even if a core powers up it will
do nothing useful & all VPs within it will stop running before they
proceed to run general kernel code & do any damage. Ideally we would
produce some sort of warning here, but given the stage of core bringup
this happens at that would be non-trivial. We also will only hit this if
a core starts up after being offlined via hotplug, and when that happens
we will already produce a warning that the CPU didn't power down in
cps_cpu_die() which seems sufficient.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16198/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
If we get into a state where a core that ought to power down isn't doing
so then the current result is that another CPU gets stuck inside
cps_cpu_die() waiting for CPU that ought to be powering down to do so.
The best case scenario is that we then trigger RCU stall messages or
lockup messages, but neither makes it particularly clear what's
happening.
Handle this more gracefully by introducing a timeout beyond which we
warn the user that the core didn't power down & stop waiting for it.
This at least allows the CPU running cps_cpu_die() to continue normally,
and hopefully presuming the CPU that powered back up is doing nothing
harmful the system will continue functioning as normal.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16197/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Systems using the MIPS Coherence Manager (CM) cannot support multi-core
SMP with dcache aliasing. This is because CPU caches are VIPT, but
interventions in CM-based systems provide only the physical address to
remote caches. This means that interventions may behave incorrectly in
the presence of an aliasing dcache, since the physical address used
when handling an intervention may lead to operation on an aliased cache
line rather than the correct line.
Prevent us from running into this issue by refusing to boot secondary
cores in systems where dcache aliasing may occur.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16196/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Prior to MIPSr6 multithreading is only supported if CONFIG_MIPS_MT_SMP
is enabled, so CONFIG_MIPS_MT_SMP selects CONFIG_SYS_SUPPORTS_SCHED_SMT.
With MIPSr6 the CONFIG_MIPS_CPS SMP implementation always supports
multithreading, so have it select CONFIG_SYS_SUPPORTS_SCHED_SMT in order
to allow the scheduler to make better informed decisions on
multithreaded MIPSr6 systems (for example those using I6400 or I6500
CPUs).
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16195/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Rather than using BUG_ON in the case of an invalid attempt to lock
access to a non-zero VP on a pre-CM3 system, use WARN_ON so that we have
even the slightest chance of recovery.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16194/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
CM3 provides a GCR_CL_OTHER register per VP, rather than only per core.
This means that we don't need to prevent other VPs within a core from
racing with code that makes use of the core-other register region.
Reduce locking overhead by demoting the per-core spinlock providing
protection for CM2.5 & lower to a per-CPU/per-VP spinlock for CM3 &
higher.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16193/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
If we're running on a system with only 1 possible CPU then it makes no
sense to reserve or initialise IPIs since we'll never use them. Avoid
doing so.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16192/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Reduce the log level for branch emulation error messages issued before
sending SIGILL by `__compute_return_epc_for_insn' as these are triggered
by user software and are not an event that would normally require any
attention. The same signal sent from elsewhere does not actually leave
any trace in the kernel log at all.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16402/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Update commit 1ac944007bed ("MIPS: math-emu: Add mfhc1 & mthc1
support.") and like done throughout `cop1Emulate' for other cases also
for the MFHC1 and MTHC1 instructions return SIGILL right away rather
than jumping to a single `return' statement.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16401/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
This is a user-visible message, so we want it to be spelled correctly.
Fixes: 5f9f41c474be ("MIPS: kernel: Prepare the JR instruction for emulation on MIPS R6")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 3.19+
Patchwork: https://patchwork.linux-mips.org/patch/16400/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Fix:
* commit 8467ca0122e2 ("MIPS: Emulate the new MIPS R6 branch compact
(BC) instruction"),
* commit 84fef630127a ("MIPS: Emulate the new MIPS R6 BALC
instruction"),
* commit 69b9a2fd05a3 ("MIPS: Emulate the new MIPS R6 BEQZC and JIC
instructions"),
* commit 28d6f93d201d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC
instructions"),
* commit c893ce38b265 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and
BEQZALC instructions")
and send SIGILL rather than returning -SIGILL for R6 branch and jump
instructions. Returning -SIGILL is never correct as the API defines
this function's result upon error to be -EFAULT and a signal actually
issued.
Fixes: 8467ca0122e2 ("MIPS: Emulate the new MIPS R6 branch compact (BC) instruction")
Fixes: 84fef630127a ("MIPS: Emulate the new MIPS R6 BALC instruction")
Fixes: 69b9a2fd05a3 ("MIPS: Emulate the new MIPS R6 BEQZC and JIC instructions")
Fixes: 28d6f93d201d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions")
Fixes: c893ce38b265 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructions")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 3.19+
Patchwork: https://patchwork.linux-mips.org/patch/16399/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Fix commit 319824eabc3f ("MIPS: kernel: branch: Do not emulate the
branch likelies on MIPS R6") and also send SIGILL rather than returning
-SIGILL for BLTZAL, BLTZALL, BGEZAL and BGEZALL instruction encodings no
longer supported in R6, except where emulated. Returning -SIGILL is
never correct as the API defines this function's result upon error to be
-EFAULT and a signal actually issued.
Fixes: 319824eabc3f ("MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 3.19+
Patchwork: https://patchwork.linux-mips.org/patch/16398/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Use the more accurate `sigill_r2r6' name for the label used in the case
of sending SIGILL in the absence of the instruction emulator for an
earlier ISA level instruction that has been removed as from the R6 ISA,
so that the `sigill_r6' name is freed for the situation where an R6
instruction is not supposed to be interpreted, because the executing
processor does not support the R6 ISA.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 3.19+
Patchwork: https://patchwork.linux-mips.org/patch/16397/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Fix commit e50c0a8fa60d ("Support the MIPS32 / MIPS64 DSP ASE.") and
send SIGILL rather than SIGBUS whenever an unimplemented BPOSGE32 DSP
ASE instruction has been encountered in `__compute_return_epc_for_insn'
as our Reserved Instruction exception handler would in response to an
attempt to actually execute the instruction. Sending SIGBUS only makes
sense for the unaligned PC case, since moved to `__compute_return_epc'.
Adjust function documentation accordingly, correct formatting and use
`pr_info' rather than `printk' as the other exit path already does.
Fixes: e50c0a8fa60d ("Support the MIPS32 / MIPS64 DSP ASE.")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 2.6.14+
Patchwork: https://patchwork.linux-mips.org/patch/16396/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Fix a regression introduced with commit fb6883e5809c ("MIPS: microMIPS:
Support handling of delay slots.") and defer to `__compute_return_epc'
if the ISA bit is set in EPC with non-MIPS16, non-microMIPS hardware,
which will then arrange for a SIGBUS due to an unaligned instruction
reference. Returning EPC here is never correct as the API defines this
function's result to be either a negative error code on failure or one
of 0 and BRANCH_LIKELY_TAKEN on success.
Fixes: fb6883e5809c ("MIPS: microMIPS: Support handling of delay slots.")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 3.9+
Patchwork: https://patchwork.linux-mips.org/patch/16395/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Complement commit fb6883e5809c ("MIPS: microMIPS: Support handling of
delay slots.") and actually decode the regular MIPS JALX major
instruction opcode, the handling of which has been added with the said
commit for EPC calculation in `__compute_return_epc_for_insn'.
Fixes: fb6883e5809c ("MIPS: microMIPS: Support handling of delay slots.")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 3.9+
Patchwork: https://patchwork.linux-mips.org/patch/16394/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Terminate FPU emulation immediately whenever an ISA mode switch has been
observed. This is so that we do not interpret machine code in the wrong
mode, for example when a regular MIPS FPU instruction has been placed in
a delay slot of a jump that switches into the MIPS16 mode, as with the
following code (taken from a GCC test suite case):
00400650 <set_fast_math>:
400650: 3c020100 lui v0,0x100
400654: 03e00008 jr ra
400658: 44c2f800 ctc1 v0,c1_fcsr
40065c: 00000000 nop
[...]
004012d0 <__libc_csu_init>:
4012d0: f000 6a02 li v0,2
4012d4: f150 0b1c la v1,3f9430 <_DYNAMIC-0x6df0>
4012d8: f400 3240 sll v0,16
4012dc: e269 addu v0,v1
4012de: 659a move gp,v0
4012e0: f00c 64f6 save a0-a2,48,ra,s0-s1
4012e4: 673c move s1,gp
4012e6: f010 9978 lw v1,-32744(s1)
4012ea: d204 sw v0,16(sp)
4012ec: eb40 jalr v1
4012ee: 653b move t9,v1
4012f0: f010 997c lw v1,-32740(s1)
4012f4: f030 9920 lw s1,-32736(s1)
4012f8: e32f subu v1,s1
4012fa: 326b sra v0,v1,2
4012fc: d206 sw v0,24(sp)
4012fe: 220c beqz v0,401318 <__libc_csu_init+0x48>
401300: 6800 li s0,0
401302: 99e0 lw a3,0(s1)
401304: 4801 addiu s0,1
401306: 960e lw a2,56(sp)
401308: 4904 addiu s1,4
40130a: 950d lw a1,52(sp)
40130c: 940c lw a0,48(sp)
40130e: ef40 jalr a3
401310: 653f move t9,a3
401312: 9206 lw v0,24(sp)
401314: ea0a cmp v0,s0
401316: 61f5 btnez 401302 <__libc_csu_init+0x32>
401318: 6476 restore 48,ra,s0-s1
40131a: e8a0 jrc ra
Here `set_fast_math' is called from `40130e' (`40130f' with the ISA bit)
and emulation triggers for the CTC1 instruction. As it is in a jump
delay slot emulation continues from `401312' (`401313' with the ISA
bit). However we have no path to handle MIPS16 FPU code emulation,
because there are no MIPS16 FPU instructions. So the default emulation
path is taken, interpreting a 32-bit word fetched by `get_user' from
`401313' as a regular MIPS instruction, which is:
401313: f5ea0a92 sdc1 $f10,2706(t7)
This makes the FPU emulator proceed with the supposed SDC1 instruction
and consequently makes the program considered here terminate with
SIGSEGV.
A similar although less severe issue exists with pure-microMIPS
processors in the case where similarly an FPU instruction is emulated in
a delay slot of a register jump that (incorrectly) switches into the
regular MIPS mode. A subsequent instruction fetch from the jump's
target is supposed to cause an Address Error exception, however instead
we proceed with regular MIPS FPU emulation.
For simplicity then, always terminate the emulation loop whenever a mode
change is detected, denoted by an ISA mode bit flip. As from commit
377cb1b6c16a ("MIPS: Disable MIPS16/microMIPS crap for platforms not
supporting these ASEs.") the result of `get_isa16_mode' can be hardcoded
to 0, so we need to examine the ISA mode bit by hand.
This complements commit 102cedc32a6e ("MIPS: microMIPS: Floating point
support.") which added JALX decoding to FPU emulation.
Fixes: 102cedc32a6e ("MIPS: microMIPS: Floating point support.")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 3.9+
Patchwork: https://patchwork.linux-mips.org/patch/16393/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
This patch switches MIPS to make use of generically implemented queued
spinlocks, rather than the ticket spinlocks used previously. This allows
us to drop a whole load of inline assembly, share more generic code, and
is also a performance win.
Results from running the AIM7 short workload on a MIPS Creator Ci40 (ie.
2 core 2 thread interAptiv CPU clocked at 546MHz) with v4.12-rc4
pistachio_defconfig, with ftrace disabled due to a current bug, and both
with & without use of queued rwlocks & spinlocks:
Forks | v4.12-rc4 | +qlocks | Change
-------|-----------|----------|--------
10 | 52630.32 | 53316.31 | +1.01%
20 | 51777.80 | 52623.15 | +1.02%
30 | 51645.92 | 52517.26 | +1.02%
40 | 51634.88 | 52419.89 | +1.02%
50 | 51506.75 | 52307.81 | +1.02%
60 | 51500.74 | 52322.72 | +1.02%
70 | 51434.81 | 52288.60 | +1.02%
80 | 51423.22 | 52434.85 | +1.02%
90 | 51428.65 | 52410.10 | +1.02%
The kernels used for these tests also had my "MIPS: Hardcode cpu_has_*
where known at compile time due to ISA" patch applied, which allows the
kernel_uses_llsc checks in cmpxchg() & xchg() to be optimised away at
compile time.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16358/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
