summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2020-03-08x86/boot/compressed/32: Save the output address instead of recalculating itArvind Sankar
In preparation for being able to decompress into a buffer starting at a different address than startup_32, save the calculated output address instead of recalculating it later. We now keep track of three addresses: %edx: startup_32 as we were loaded by bootloader %ebx: new location of compressed kernel %ebp: start of decompression buffer Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200303221205.4048668-2-nivedita@alum.mit.edu Link: https://lore.kernel.org/r/20200308080859.21568-16-ardb@kernel.org
2020-03-08x86/boot: Use unsigned comparison for addressesArvind Sankar
The load address is compared with LOAD_PHYSICAL_ADDR using a signed comparison currently (using jge instruction). When loading a 64-bit kernel using the new efi32_pe_entry() point added by: 97aa276579b2 ("efi/x86: Add true mixed mode entry point into .compat section") using Qemu with -m 3072, the firmware actually loads us above 2Gb, resulting in a very early crash. Use the JAE instruction to perform a unsigned comparison instead, as physical addresses should be considered unsigned. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200301230436.2246909-6-nivedita@alum.mit.edu Link: https://lore.kernel.org/r/20200308080859.21568-14-ardb@kernel.org
2020-03-08efi/x86: Avoid using code32_startArvind Sankar
code32_start is meant for 16-bit real-mode bootloaders to inform the kernel where the 32-bit protected mode code starts. Nothing in the protected mode kernel except the EFI stub uses it. efi_main() currently returns boot_params, with code32_start set inside it to tell efi_stub_entry() where startup_32 is located. Since it was invoked by efi_stub_entry() in the first place, boot_params is already known. Return the address of startup_32 instead. This will allow a 64-bit kernel to live above 4Gb, for example, and it's cleaner as well. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200301230436.2246909-5-nivedita@alum.mit.edu Link: https://lore.kernel.org/r/20200308080859.21568-13-ardb@kernel.org
2020-03-08efi/x86: Make efi32_pe_entry() more readableArvind Sankar
Set up a proper frame pointer in efi32_pe_entry() so that it's easier to calculate offsets for arguments. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200301230436.2246909-4-nivedita@alum.mit.edu Link: https://lore.kernel.org/r/20200308080859.21568-12-ardb@kernel.org
2020-03-08efi/x86: Respect 32-bit ABI in efi32_pe_entry()Arvind Sankar
verify_cpu() clobbers BX and DI. In case we have to return error, we need to preserve them to respect the 32-bit calling convention. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200301230436.2246909-3-nivedita@alum.mit.edu Link: https://lore.kernel.org/r/20200308080859.21568-11-ardb@kernel.org
2020-03-08efi/x86: Annotate the LOADED_IMAGE_PROTOCOL_GUID with SYM_DATAArvind Sankar
Use SYM_DATA*() macros to annotate this constant, and explicitly align it to 4-byte boundary. Use lower-case for hexadecimal data. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200301230436.2246909-2-nivedita@alum.mit.edu Link: https://lore.kernel.org/r/20200308080859.21568-10-ardb@kernel.org
2020-03-08Merge branch 'efi/urgent' into efi/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-03-08Merge tag 'efi-next' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core More EFI updates for v5.7 - Incorporate a stable branch with the EFI pieces of Hans's work on loading device firmware from EFI boot service memory regions Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-03-07Merge tag 's390-5.6-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix panic in gup_fast on large pud by providing an implementation of pud_write. This has been overlooked during migration to common gup code. - Fix unexpected write combining on PCI stores. * tag 's390-5.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: Fix unexpected write combine on resource s390/mm: fix panic in gup_fast on large pud
2020-03-07Merge tag 'powerpc-5.6-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 5.6: - One fix for a recent regression to our breakpoint/watchpoint code. - Another fix for our KUAP support, this time a missing annotation in a rarely used path in signal handling. - A fix for our handling of a CPU feature that effects the PMU, when booting guests in some configurations. - A minor fix to our linker script to explicitly include the .BTF section. Thanks to: Christophe Leroy, Desnes A. Nunes do Rosario, Leonardo Bras, Naveen N. Rao, Ravi Bangoria, Stefan Berger" * tag 'powerpc-5.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm: Fix missing KUAP disable in flush_coherent_icache() powerpc: fix hardware PMU exception bug on PowerVM compatibility mode systems powerpc: Include .BTF section powerpc/watchpoint: Don't call dar_within_range() for Book3S
2020-03-07MIPS: DTS: CI20: fix interrupt for pcf8563 RTCH. Nikolaus Schaller
Interrupts should not be specified by interrupt line but by gpio parent and reference. Fixes: 73f2b940474d ("MIPS: CI20: DTS: Add I2C nodes") Cc: stable@vger.kernel.org Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-07MIPS: DTS: CI20: fix PMU definitions for ACT8600H. Nikolaus Schaller
There is a ACT8600 on the CI20 board and the bindings of the ACT8865 driver have changed without updating the CI20 device tree. Therefore the PMU can not be probed successfully and is running in power-on reset state. Fix DT to match the latest act8865-regulator bindings. Fixes: 73f2b940474d ("MIPS: CI20: DTS: Add I2C nodes") Cc: stable@vger.kernel.org Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-06arm64: dts: ls1043a: FMan erratum A050385Madalin Bucur
The LS1043A SoC is affected by the A050385 erratum stating that FMAN DMA read or writes under heavy traffic load may cause FMAN internal resource leak thus stopping further packet processing. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-06Merge tag 'riscv-for-linus-5.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: "This contains a handful of fixes that I would like to target for 5.6: - A pair of fixes to module loading, which we hope solve the last of the issues with module text being loaded too sparsely for our call relocations. - A Kconfig fix that disallows selecting memory models not supported by NOMMU. - A series of Kconfig updates to ease selecting the drivers necessary to run on QEMU's virt platform. - DTS updates for SiFive's HiFive Unleashed. - A fix to our seccomp support that avoids mangling restartable syscalls" * tag 'riscv-for-linus-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: fix seccomp reject syscall code path riscv: dts: Add GPIO reboot method to HiFive Unleashed DTS file RISC-V: Select Goldfish RTC driver for QEMU virt machine RISC-V: Select SYSCON Reboot and Poweroff for QEMU virt machine RISC-V: Enable QEMU virt machine support in defconfigs RISC-V: Add kconfig option for QEMU virt machine riscv: Fix range looking for kernel image memblock riscv: Force flat memory model with no-mmu riscv: Change code model of module to medany to improve data accessing riscv: avoid the PIC offset of static percpu data in module beyond 2G limits
2020-03-06Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Here are another three arm64 fixes for 5.6, all pretty minor. Main thing is fixing a silly bug in the fsl_imx8_ddr PMU driver where we would zero the counters when disabling them. - Fix misreporting of ASID limit when KPTI is enabled - Fix busted NULL pointer checks for GICC structure in ACPI PMU code - Avoid nobbling the "fsl_imx8_ddr" PMU counters when disabling them" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: context: Fix ASID limit in boot messages drivers/perf: arm_pmu_acpi: Fix incorrect checking of gicc pointer drivers/perf: fsl_imx8_ddr: Correct the CLEAR bit definition
2020-03-06bpf, x32: Fix bug with JMP32 JSET BPF_X checking upper bitsLuke Nelson
The current x32 BPF JIT is incorrect for JMP32 JSET BPF_X when the upper 32 bits of operand registers are non-zero in certain situations. The problem is in the following code: case BPF_JMP | BPF_JSET | BPF_X: case BPF_JMP32 | BPF_JSET | BPF_X: ... /* and dreg_lo,sreg_lo */ EMIT2(0x23, add_2reg(0xC0, sreg_lo, dreg_lo)); /* and dreg_hi,sreg_hi */ EMIT2(0x23, add_2reg(0xC0, sreg_hi, dreg_hi)); /* or dreg_lo,dreg_hi */ EMIT2(0x09, add_2reg(0xC0, dreg_lo, dreg_hi)); This code checks the upper bits of the operand registers regardless if the BPF instruction is BPF_JMP32 or BPF_JMP64. Registers dreg_hi and dreg_lo are not loaded from the stack for BPF_JMP32, however, they can still be polluted with values from previous instructions. The following BPF program demonstrates the bug. The jset64 instruction loads the temporary registers and performs the jump, since ((u64)r7 & (u64)r8) is non-zero. The jset32 should _not_ be taken, as the lower 32 bits are all zero, however, the current JIT will take the branch due the pollution of temporary registers from the earlier jset64. mov64 r0, 0 ld64 r7, 0x8000000000000000 ld64 r8, 0x8000000000000000 jset64 r7, r8, 1 exit jset32 r7, r8, 1 mov64 r0, 2 exit The expected return value of this program is 2; under the buggy x32 JIT it returns 0. The fix is to skip using the upper 32 bits for jset32 and compare the upper 32 bits for jset64 only. All tests in test_bpf.ko and selftests/bpf/test_verifier continue to pass with this change. We found this bug using our automated verification tool, Serval. Fixes: 69f827eb6e14 ("x32: bpf: implement jitting of JMP32") Co-developed-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Luke Nelson <luke.r.nels@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200305234416.31597-1-luke.r.nels@gmail.com
2020-03-06arch/Kconfig: update HAVE_RELIABLE_STACKTRACE descriptionMiroslav Benes
save_stack_trace_tsk_reliable() is not the only function providing the reliable stack traces anymore. Architecture might define ARCH_STACKWALK which provides a newer stack walking interface and has arch_stack_walk_reliable() function. Update the description accordingly. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: http://lkml.kernel.org/r/20200120154042.9934-1-mbenes@suse.cz Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-06MIPS: smp: Remove tick_broadcast_countPeter Xu
Now smp_call_function_single_async() provides the protection that we'll return with -EBUSY if the csd object is still pending, then we don't need the tick_broadcast_count counter any more. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20191216213125.9536-3-peterx@redhat.com
2020-03-06arm64: defconfig: enable CONFIG_SCHED_SMTValentin Schneider
The (CFS) scheduler has some extra logic catering to systems with SMT, but that logic won't be compiled in unless the above config is set. Note that the SMT-centric codepaths are gated by the sched_smt_present static key, and the SMT sched_domains will only survive if the platform has SMT. As such, the only impact on !SMT platforms should be a slightly bigger kernel - no behavioural change. Distro kernels already enable it, which makes sense since there already are things like ThunderX2 out in the wild. Enable it for the defconfig. Some deltas =========== FWIW my ELF symbol table diff looks something like this: NAME BEFORE AFTER DELTA update_sd_lb_stats.constprop.135 0 1864 +1864 find_idlest_group.isra.115 0 1808 +1808 update_numa_stats.isra.121 0 628 +628 select_task_rq_fair 3236 3732 +496 compute_energy.isra.112 0 420 +420 score_nearby_nodes.part.120 0 380 +380 __update_idle_core 0 232 +232 nohz_balance_exit_idle.part.127 0 216 +216 sched_slice.isra.99 0 172 +172 update_load_avg.part.107 0 116 +116 wakeup_preempt_entity.isra.101 0 92 +92 sched_cpu_activate 340 396 +56 pick_next_task_idle 8 56 +48 sched_cpu_deactivate 252 292 +40 show_smt_active 44 80 +36 cpu_smt_mask 0 28 +28 set_next_task_idle 4 32 +28 task_numa_work 680 692 +12 cpu_smt_flags 0 8 +8 enqueue_task_fair 2608 2612 +4 wakeup_preempt_entity.isra.104 92 0 -92 update_load_avg 1028 932 -96 task_numa_migrate 1824 1728 -96 sched_slice.isra.102 172 0 -172 nohz_balance_exit_idle.part.130 216 0 -216 task_numa_find_cpu 2116 1868 -248 score_nearby_nodes.part.123 380 0 -380 compute_energy.isra.115 420 0 -420 update_numa_stats.isra.124 472 0 -472 find_idlest_group.isra.118 1808 0 -1808 update_sd_lb_stats.constprop.138 1864 0 -1864 ------------------------------------------------------------------ DELTA SUM +820 As for the sched_domains, this is on a hikey960: before: $ cat /proc/sys/kernel/sched_domain/cpu*/domain*/name | sort | uniq DIE MC after: $ cat /proc/sys/kernel/sched_domain/cpu*/domain*/name | sort | uniq DIE MC Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200227191433.31994-3-valentin.schneider@arm.com
2020-03-06arm/topology: Populate arch_scale_thermal_pressure() for ARM platformsThara Gopinath
Hook up topology_get_thermal_pressure to arch_scale_thermal_pressure thus enabling scheduler to retrieve instantaneous thermal pressure of a CPU. Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200222005213.3873-6-thara.gopinath@linaro.org
2020-03-06arm64/topology: Populate arch_scale_thermal_pressure() for arm64 platformsThara Gopinath
Hook up topology_get_thermal_pressure to arch_scale_thermal_pressure thus enabling scheduler to retrieve instantaneous thermal pressure of a CPU. Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200222005213.3873-5-thara.gopinath@linaro.org
2020-03-06Merge branch 'linus' into sched/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-03-06Merge branch 'perf/urgent' into perf/core, to pick up the latest fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-03-05riscv: fix seccomp reject syscall code pathTycho Andersen
If secure_computing() rejected a system call, we were previously setting the system call number to -1, to indicate to later code that the syscall failed. However, if something (e.g. a user notification) was sleeping, and received a signal, we may set a0 to -ERESTARTSYS and re-try the system call again. In this case, seccomp "denies" the syscall (because of the signal), and we would set a7 to -1, thus losing the value of the system call we want to restart. Instead, let's return -1 from do_syscall_trace_enter() to indicate that the syscall was rejected, so we don't clobber the value in case of -ERESTARTSYS or whatever. This commit fixes the user_notification_signal seccomp selftest on riscv to no longer hang. That test expects the system call to be re-issued after the signal, and it wasn't due to the above bug. Now that it is, everything works normally. Note that in the ptrace (tracer) case, the tracer can set the register values to whatever they want, so we still need to keep the code that handles out-of-bounds syscalls. However, we can drop the comment. We can also drop syscall_set_nr(), since it is no longer used anywhere, and the code that re-loads the value in a7 because of it. Reported in: https://lore.kernel.org/bpf/CAEn-LTp=ss0Dfv6J00=rCAy+N78U2AmhqJNjfqjr2FDpPYjxEQ@mail.gmail.com/ Reported-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Signed-off-by: Tycho Andersen <tycho@tycho.ws> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05riscv: dts: Add GPIO reboot method to HiFive Unleashed DTS fileYash Shah
Add the ability to reboot the HiFive Unleashed board via GPIO. Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05RISC-V: Select Goldfish RTC driver for QEMU virt machineAnup Patel
We select Goldfish RTC driver using QEMU virt machine kconfig option to access RTC device on QEMU virt machine. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05RISC-V: Select SYSCON Reboot and Poweroff for QEMU virt machineAnup Patel
The SYSCON Reboot and Poweroff drivers can be used on QEMU virt machine to reboot or poweroff the system hence we select these drivers using QEMU virt machine kconfig option. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05RISC-V: Enable QEMU virt machine support in defconfigsAnup Patel
We have kconfig option for QEMU virt machine so let's enable it in RV32 and RV64 defconfigs. Also, we remove various VIRTIO configs from RV32 and RV64 defconfigs because these are now selected by QEMU virt machine kconfig option. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05RISC-V: Add kconfig option for QEMU virt machineAnup Patel
We add kconfig option for QEMU virt machine and select all required VIRTIO drivers using this kconfig option. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05MIPS: Replace setup_irq() by request_irq()afzal mohammed
request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). remove_irq() has been replaced by free_irq() as well. There were build error's during previous version, couple of which was reported by kbuild test robot <lkp@intel.com> of which one was reported by Thomas Bogendoerfer <tsbogend@alpha.franken.de> as well. There were a few more issues including build errors, those also have been fixed. [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-05KVM: fix Kconfig menu text for -WerrorJason A. Donenfeld
This was evidently copy and pasted from the i915 driver, but the text wasn't updated. Fixes: 4f337faf1c55 ("KVM: allow disabling -Werror") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-05crypto: x86/curve25519 - support assemblers with no adx supportJason A. Donenfeld
Some older version of GAS do not support the ADX instructions, similarly to how they also don't support AVX and such. This commit adds the same build-time detection mechanisms we use for AVX and others for ADX, and then makes sure that the curve25519 library dispatcher calls the right functions. Reported-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-05powerpc/mm: Fix missing KUAP disable in flush_coherent_icache()Michael Ellerman
Stefan reported a strange kernel fault which turned out to be due to a missing KUAP disable in flush_coherent_icache() called from flush_icache_range(). The fault looks like: Kernel attempted to access user page (7fffc30d9c00) - exploit attempt? (uid: 1009) BUG: Unable to handle kernel data access on read at 0x7fffc30d9c00 Faulting instruction address: 0xc00000000007232c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV CPU: 35 PID: 5886 Comm: sigtramp Not tainted 5.6.0-rc2-gcc-8.2.0-00003-gfc37a1632d40 #79 NIP: c00000000007232c LR: c00000000003b7fc CTR: 0000000000000000 REGS: c000001e11093940 TRAP: 0300 Not tainted (5.6.0-rc2-gcc-8.2.0-00003-gfc37a1632d40) MSR: 900000000280b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28000884 XER: 00000000 CFAR: c0000000000722fc DAR: 00007fffc30d9c00 DSISR: 08000000 IRQMASK: 0 GPR00: c00000000003b7fc c000001e11093bd0 c0000000023ac200 00007fffc30d9c00 GPR04: 00007fffc30d9c18 0000000000000000 c000001e11093bd4 0000000000000000 GPR08: 0000000000000000 0000000000000001 0000000000000000 c000001e1104ed80 GPR12: 0000000000000000 c000001fff6ab380 c0000000016be2d0 4000000000000000 GPR16: c000000000000000 bfffffffffffffff 0000000000000000 0000000000000000 GPR20: 00007fffc30d9c00 00007fffc30d8f58 00007fffc30d9c18 00007fffc30d9c20 GPR24: 00007fffc30d9c18 0000000000000000 c000001e11093d90 c000001e1104ed80 GPR28: c000001e11093e90 0000000000000000 c0000000023d9d18 00007fffc30d9c00 NIP flush_icache_range+0x5c/0x80 LR handle_rt_signal64+0x95c/0xc2c Call Trace: 0xc000001e11093d90 (unreliable) handle_rt_signal64+0x93c/0xc2c do_notify_resume+0x310/0x430 ret_from_except_lite+0x70/0x74 Instruction dump: 409e002c 7c0802a6 3c62ff31 3863f6a0 f8010080 48195fed 60000000 48fe4c8d 60000000 e8010080 7c0803a6 7c0004ac <7c00ffac> 7c0004ac 4c00012c 38210070 This path through handle_rt_signal64() to setup_trampoline() and flush_icache_range() is only triggered by 64-bit processes that have unmapped their VDSO, which is rare. flush_icache_range() takes a range of addresses to flush. In flush_coherent_icache() we implement an optimisation for CPUs where we know we don't actually have to flush the whole range, we just need to do a single icbi. However we still execute the icbi on the user address of the start of the range we're flushing. On CPUs that also implement KUAP (Power9) that leads to the spurious fault above. We should be able to pass any address, including a kernel address, to the icbi on these CPUs, which would avoid any interaction with KUAP. But I don't want to make that change in a bug fix, just in case it surfaces some strange behaviour on some CPU. So for now just disable KUAP around the icbi. Note the icbi is treated as a load, so we allow read access, not write as you'd expect. Fixes: 890274c2dc4c ("powerpc/64s: Implement KUAP for Radix MMU") Cc: stable@vger.kernel.org # v5.2+ Reported-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200303235708.26004-1-mpe@ellerman.id.au
2020-03-04riscv: Fix range looking for kernel image memblockAlexandre Ghiti
When looking for the memblock where the kernel lives, we should check that the memory range associated to the memblock entirely comprises the kernel image and not only intersects with it. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-04MIPS: OCTEON: irq: Fix potential NULL pointer dereferenceGustavo A. R. Silva
There is a potential NULL pointer dereference in case kzalloc() fails and returns NULL. Fix this by adding a NULL check on *cd* This bug was detected with the help of Coccinelle. Fixes: 64b139f97c01 ("MIPS: OCTEON: irq: add CIB and other fixes") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-04arch/mips: change duplicated word in NUMA help textRandy Dunlap
Fix wording in NUMA help text. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paulburton@kernel.org> Cc: linux-mips@vger.kernel.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-04riscv: Force flat memory model with no-mmuDamien Le Moal
Compilation errors trigger if ARCH_SPARSEMEM_ENABLE is enabled for a nommu kernel. Since the sparsemem model does not make sense anyway for the nommu case, do not allow selecting this option to always use the flatmem model. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-04Merge tag 'socfpga_defconfig_fix_for_v5.6' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes ARM: socfpga_defconfig: add back DEBUGFS - Add back DEBUG_FS for socfpga_defconfig * tag 'socfpga_defconfig_fix_for_v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga_defconfig: Add back DEBUG_FS Link: https://lore.kernel.org/r/20200304101917.1243-1-dinguyen@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-03-04s390/pci: Fix unexpected write combine on resourceNiklas Schnelle
In the initial MIO support introduced in commit 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions") zpci_map_resource() and zpci_setup_resources() default to using the mio_wb address as the resource's start address. This means users of the mapping, which includes most drivers, will get write combining on PCI Stores. This may lead to problems when drivers expect write through behavior when not using an explicit ioremap_wc(). Cc: stable@vger.kernel.org Fixes: 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-04s390/mm: fix panic in gup_fast on large pudGerald Schaefer
On s390 there currently is no implementation of pud_write(). That was ok as long as we had our own implementation of get_user_pages_fast() which checked for pud protection by testing the bit directly w/o using pud_write(). The other callers of pud_write() are not reachable on s390. After commit 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code") we use the generic get_user_pages_fast(), which does call pud_write() in pud_access_permitted() for FOLL_WRITE access on a large pud. Without an s390 specific pud_write(), the generic version is called, which contains a BUG() statement to remind us that we don't have a proper implementation. This results in a kernel panic. Fix this by providing an implementation of pud_write(). Cc: <stable@vger.kernel.org> # 5.2+ Fixes: 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code") Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-04ARM: socfpga_defconfig: Add back DEBUG_FSDinh Nguyen
Commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") removed select for DEBUG_FS but we still need it for development purposes. Fixes: 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2020-03-03Merge tag 'socfpga_dts_fix_for_v5.6_v2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes arm64: dts: agilex: fix gmac compatible - The compatible for Agilex GMAC should be "altr,socfpga-stmmac-a10-s10" * tag 'socfpga_dts_fix_for_v5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: (578 commits) arm64: dts: socfpga: agilex: Fix gmac compatible Linux 5.6-rc4 KVM: VMX: check descriptor table exits on instruction emulation ext4: potential crash on allocation error in ext4_alloc_flex_bg_array() macintosh: therm_windtunnel: fix regression when instantiating devices jbd2: fix data races at struct journal_head kvm: x86: Limit the number of "kvm: disabled by bios" messages KVM: x86: avoid useless copy of cpufreq policy KVM: allow disabling -Werror KVM: x86: allow compiling as non-module with W=1 KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipis KVM: Introduce pv check helpers KVM: let declaration of kvm_get_running_vcpus match implementation KVM: SVM: allocate AVIC data structures based on kvm_amd module parameter MAINTAINERS: Correct Cadence PCI driver path io_uring: fix 32-bit compatability with sendmsg/recvmsg net: dsa: mv88e6xxx: Fix masking of egress port mlxsw: pci: Wait longer before accessing the device after reset sfc: fix timestamp reconstruction at 16-bit rollover points vsock: fix potential deadlock in transport->release() ... Link: https://lore.kernel.org/r/20200303153509.28248-1-dinguyen@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-03-03ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id modeTony Lindgren
Commit cd28d1d6e52e ("net: phy: at803x: Disable phy delay for RGMII mode") caused a regression for dm814x boards where NFSroot would no longer work. Let's fix the issue by configuring "rgmii-id" mode as internal delays are needed that is no longer the case with "rgmii" mode. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-03-03riscv: Change code model of module to medany to improve data accessingVincent Chen
All the loaded module locates in the region [＆_end-2G，VMALLOC_END] at runtime, so the distance from the module start to the end of the kernel image does not exceed 2GB. Hence, the code model of the kernel module can be changed to medany to improve the performance data access. Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-03riscv: avoid the PIC offset of static percpu data in module beyond 2G limitsVincent Chen
The compiler uses the PIC-relative method to access static variables instead of GOT when the code model is PIC. Therefore, the limitation of the access range from the instruction to the symbol address is +-2GB. Under this circumstance, the kernel cannot load a kernel module if this module has static per-CPU symbols declared by DEFINE_PER_CPU(). The reason is that kernel relocates the .data..percpu section of the kernel module to the end of kernel's .data..percpu. Hence, the distance between the per-CPU symbols and the instruction will exceed the 2GB limits. To solve this problem, the kernel should place the loaded module in the memory area [&_end-2G, VMALLOC_END]. Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Suggested-by: Alexandre Ghiti <alex@ghiti.fr> Suggested-by: Anup Patel <anup@brainfault.org> Tested-by: Alexandre Ghiti <alex@ghiti.fr> Tested-by: Carlos de Paula <me@carlosedp.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-03KVM: x86: remove stale comment from struct x86_emulate_ctxtVitaly Kuznetsov
Commit c44b4c6ab80e ("KVM: emulate: clean up initializations in init_decode_cache") did some field shuffling and instead of [opcode_len, _regs) started clearing [has_seg_override, modrm). The comment about clearing fields altogether is not true anymore. Fixes: c44b4c6ab80e ("KVM: emulate: clean up initializations in init_decode_cache") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-03KVM: x86: clear stale x86_emulate_ctxt->intercept valueVitaly Kuznetsov
After commit 07721feee46b ("KVM: nVMX: Don't emulate instructions in guest mode") Hyper-V guests on KVM stopped booting with: kvm_nested_vmexit: rip fffff802987d6169 reason EPT_VIOLATION info1 181 info2 0 int_info 0 int_info_err 0 kvm_page_fault: address febd0000 error_code 181 kvm_emulate_insn: 0:fffff802987d6169: f3 a5 kvm_emulate_insn: 0:fffff802987d6169: f3 a5 FAIL kvm_inj_exception: #UD (0x0) "f3 a5" is a "rep movsw" instruction, which should not be intercepted at all. Commit c44b4c6ab80e ("KVM: emulate: clean up initializations in init_decode_cache") reduced the number of fields cleared by init_decode_cache() claiming that they are being cleared elsewhere, 'intercept', however, is left uncleared if the instruction does not have any of the "slow path" flags (NotImpl, Stack, Op3264, Sse, Mmx, CheckPerm, NearBranch, No16 and of course Intercept itself). Fixes: c44b4c6ab80e ("KVM: emulate: clean up initializations in init_decode_cache") Fixes: 07721feee46b ("KVM: nVMX: Don't emulate instructions in guest mode") Cc: stable@vger.kernel.org Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-03arm64: dts: socfpga: agilex: Fix gmac compatibleLey Foon Tan
Fix gmac compatible string to "altr,socfpga-stmmac-a10-s10". Gmac for Agilex should use same compatible as Stratix 10. Fixes: 4b36daf9ada3 ("arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGA") Cc: stable@vger.kernel.org Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2020-03-03efi: Add embedded peripheral firmware supportHans de Goede
Just like with PCI options ROMs, which we save in the setup_efi_pci* functions from arch/x86/boot/compressed/eboot.c, the EFI code / ROM itself sometimes may contain data which is useful/necessary for peripheral drivers to have access to. Specifically the EFI code may contain an embedded copy of firmware which needs to be (re)loaded into the peripheral. Normally such firmware would be part of linux-firmware, but in some cases this is not feasible, for 2 reasons: 1) The firmware is customized for a specific use-case of the chipset / use with a specific hardware model, so we cannot have a single firmware file for the chipset. E.g. touchscreen controller firmwares are compiled specifically for the hardware model they are used with, as they are calibrated for a specific model digitizer. 2) Despite repeated attempts we have failed to get permission to redistribute the firmware. This is especially a problem with customized firmwares, these get created by the chip vendor for a specific ODM and the copyright may partially belong with the ODM, so the chip vendor cannot give a blanket permission to distribute these. This commit adds support for finding peripheral firmware embedded in the EFI code and makes the found firmware available through the new efi_get_embedded_fw() function. Support for loading these firmwares through the standard firmware loading mechanism is added in a follow-up commit in this patch-series. Note we check the EFI_BOOT_SERVICES_CODE for embedded firmware near the end of start_kernel(), just before calling rest_init(), this is on purpose because the typical EFI_BOOT_SERVICES_CODE memory-segment is too large for early_memremap(), so the check must be done after mm_init(). This relies on EFI_BOOT_SERVICES_CODE not being free-ed until efi_free_boot_services() is called, which means that this will only work on x86 for now. Reported-by: Dave Olsthoorn <dave@bewaar.me> Suggested-by: Peter Jones <pjones@redhat.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200115163554.101315-3-hdegoede@redhat.com Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-03-03efi: Export boot-services code and data as debugfs-blobsHans de Goede
Sometimes it is useful to be able to dump the efi boot-services code and data. This commit adds these as debugfs-blobs to /sys/kernel/debug/efi, but only if efi=debug is passed on the kernel-commandline as this requires not freeing those memory-regions, which costs 20+ MB of RAM. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200115163554.101315-2-hdegoede@redhat.com Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
generated by cgit (git 2.34.1) at 2025-10-03 14:47:14 +0000