summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2024-11-04ARM: dts: turris-omnia: Add global LED brightness change interruptMarek Behún
When global LED brightness is changed by pressing the front button on Turris Omnia, the MCU can produce an interrupt to the CPU. Add the description of this interrupt to the LED controller node. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-11-04ARM: dts: marvell: kirkwood: Fix at24 EEPROM node nameRob Herring (Arm)
at24.yaml defines the node name for at24 EEPROMs as 'eeprom'. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-11-04arm64: dts: ti: k3-am62: use opp_efuse_table for opp-table sysconDhruva Gole
Add another entry in the wkup_conf for the syscon node, and then use that for the syscon in opp-table. Marking entire wkup_conf as "syscon", "simple-mfd" is wrong and needs to be addressed similar to how other child-nodes in wkup_conf are implemented in the same file. Signed-off-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20241104063707.3604302-1-d-gole@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-11-04Merge tag 'memory-controller-drv-6.13' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers Memory controller drivers for v6.13 1. Freescale IFC: Split handling of child nodes in the bindings to fix dtbs_check warning. 2. ARM64 defconfig: Nothing selects CONFIG_FSL_IFC anymore since commit 9ba0cae3cac0 ("memory: fsl_ifc: Make FSL_IFC config visible and selectable") and actually CONFIG_MTD_NAND_FSL_IFC depends on it now. Enable CONFIG_FSL_IFC in ARM64 defconfig, so users of it won't lose these two drivers. * tag 'memory-controller-drv-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: arm64: defconfig: Update defconfig with now user-visible CONFIG_FSL_IFC dt-bindings: memory-controllers: fsl,ifc: split child node differences Link: https://lore.kernel.org/r/20241029075348.19580-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-11-04arm64/fpsimd: Fix a typoChristophe JAILLET
s/FPSMID/FPSIMD/ M and I swapped. Fix it. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/2cbcb42615e9265bccc9b746465d7998382e605d.1730539907.git.christophe.jaillet@wanadoo.fr Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-11-04arm64: dts: mediatek: mt8183-kukui: Drop bogus fixed regulatorsChen-Yu Tsai
A couple of the fixed regulators in the Kukui dtsi do not actually exist in the hardware design; they are simply power rails connected together with 0 ohm bridges. Drop them and assign their upstream supplies to their consumers instead. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20241030070224.1006331-5-wenst@chromium.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-11-04arm64: dts: mediatek: mt8183-kukui-jacuzzi: Add supplies for fixed regulatorsChen-Yu Tsai
When the fixed regulators for the LCD panel and DP bridge were added, their supplies were not modeled in. These, except for the 1.0V supply, are just load switches, and need and have a supply. Add the supplies for each of the fixed regulators. Fixes: cabc71b08eb5 ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20241030070224.1006331-4-wenst@chromium.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-11-04arm64: dts: mediatek: mt8183-kukui-jacuzzi: Fix DP bridge supply namesChen-Yu Tsai
Some of the regulator supplies for the MIPI-DPI-to-DP bridge and their associated nodes are incorrectly named. In particular, the 1.0V supply was modeled as a 1.2V supply. Fix all the incorrect names, and also fix the voltage of the 1.0V regulator. Fixes: cabc71b08eb5 ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20241030070224.1006331-3-wenst@chromium.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-11-04arm64: dts: mediatek: mt6358: fix dtbs_check errorMacpaul Lin
Fix DTBS check errors for 'mt6358codec' and 'mt6358regulator': Error message is: pmic: 'mt6358codec' and 'mt6358regulator' does not match any of the regexes: 'pinctrl-[0-9]+'. Rename these two device node to generic 'audio-codec' and 'regulators'. Fixes: 9f8872221674 ("arm64: dts: mt6358: add PMIC MT6358 related nodes") Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Link: https://lore.kernel.org/r/20241029064647.13370-1-macpaul.lin@mediatek.com Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-11-04arm64: dts: mediatek: mt8186-corsola: Fix IT6505 reset line polarityChen-Yu Tsai
The reset line of the IT6505 bridge chip is active low, not active high. It was incorrectly inverted in the device tree as the implementation at the time incorrectly inverted the polarity in its driver, due to a prior device having an inline inverting level shifter. Fix the polarity now while the external display pipeline is incomplete, thereby avoiding any impact to running systems. A matching fix for the driver should be included if this change is backported. Fixes: 8855d01fb81f ("arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool") Cc: stable@vger.kernel.org Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20241029100226.660263-1-wenst@chromium.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-11-04arm64: dts: freescale: imx8mp-verdin: Fix SD regulator startup delayFrancesco Dolcini
The power switch used to power the SD card interface might have more than 2ms turn-on time, increase the startup delay to 20ms to prevent failures. Fixes: a39ed23bdf6e ("arm64: dts: freescale: add initial support for verdin imx8m plus") Cc: stable@vger.kernel.org Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04arm64: dts: freescale: imx8mm-verdin: Fix SD regulator startup delayFrancesco Dolcini
The power switch used to power the SD card interface might have more than 2ms turn-on time, increase the startup delay to 20ms to prevent failures. Fixes: 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini") Cc: stable@vger.kernel.org Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04arm64: dts: imx8mp-verdin: add single-master property to all i2c nodesStefan Eichenberger
By default we expect all i2c nodes to be single-master, we do not have any module or carrier board that uses multi-master mode on any i2c controller. With this property set, we benefit from optimisations made exclusively for single-masters. Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04arm64: dts: imx8mm-verdin: add single-master property to all i2c nodesStefan Eichenberger
By default we expect all i2c nodes to be single-master, we do not have any module or carrier board that uses multi-master mode on any i2c controller. With this property set, we benefit from optimisations made exclusively for single-masters. Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04arm64: dts: imx95: Add missing vendor string to SCMI propertyAlexander Stein
With commit 7bf46ec090b9e ("dt-bindings: firmware: arm,scmi: Add missing vendor string") this property has 'arm' vendor prefix. Fix the property name accordingly. Fixes: 61ed94cd54e3 ("arm64: dts: imx95: set max-rx-timeout-ms") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04arm64: dts: imx8mp-navqp: Add HDMI supportGilles Talis
The HDMI connector on the board is a micro-HDMI (type "d") Signed-off-by: Gilles Talis <gilles.talis@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04arm64: dts: imx8qm-ss-hsio: fix PCI and SATA clock indicesFrank Li
The first argument of lpcg should indices, instead of index. Fix it by use predefined macro. Fixes: 9f7053f67c8a ("arm64: dts: imx8-ss-hsio: Add PCIe and SATA support") Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04arm64: dts: imx8qm-ss-hsio: fix interrupt-map indent under pci* nodesFrank Li
Fix interrupt-map indent under pci* nodes. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04arm64: dts: imx8qxp-mek: replace hardcode 0 with IMX_LPCG_CLK_0Frank Li
Update clock settings to use the macro IMX_LPCG_CLK_0 instead of the hardcoded value 0. The first argument of lpcg is indices, not index. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04arm64: dts: imx8mn-tqma8mqnl-mba8mx-usbot: fix coexistence of output-low and ↵Frank Li
output-high in GPIO Fix the issue where both 'output-low' and 'output-high' exist under GPIO hog nodes (rst_usb_hub_hog and sel_usb_hub_hog) when applying device tree overlays. Since /delete-property/ is not supported in the overlays, setting 'output-low' results in both properties being present. The workaround is to disable these hogs and create new ones with 'output-low' as needed. Fix below CHECK_DTBS warning: arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtb: sel-usb-hub-hog: {'output-low': True, 'gpio-hog': True, 'gpios': [[1, 0]], 'output-high': True, 'phandle': 108, '$nodename': ['sel-usb-hub-hog']} is valid under each of {'required': ['output-low']}, {'required': ['output-high'] Fixes: 3f6fc30abebc ("arm64: dts: imx8mn: tqma8mqnl-mba8mx: Add USB DR overlay") Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04arm64: dts: layerscape: remove en25s64 and only keep jedec,spi-nor ↵Frank Li
compatible string In jedec,spi-nor.yaml: SPI NOR flashes compatible with the JEDEC SFDP standard or which may be identified with the READ ID opcode (0x9F) do not deserve a specific compatible. They should instead only be matched against the generic "jedec,spi-nor" compatible. en25s64 already in drivers/mtd/spi-nor/eon.c. So remove it safely and fix below warning: arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: flash@2: compatible: 'oneOf' conditional failed, one must be fixed: ['en25s64', 'jedec,spi-nor'] is too long Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04arm64: dts: imx8mp-kontron-dl: change touchscreen power-supply to AVDD28-supplyFrank Li
Update the touchscreen power-supply from 'power-supply' to 'AVDD28-supply' and 'VDDIO-supply' as per the binding documentation in goodix.yaml. Fix below warning: arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtb: touchscreen@5d: 'power-supply' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/input/touchscreen/goodix.yaml Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04arm64: dts: imx8mp: Add Boundary Device Nitrogen8MP Universal SMARC Carrier ↵Bhavin Sharma
Board Adds the DTSI file for the Nitrogen8MP SMARC System on Module which is delivered with the Nitrogen8MP Universal SMARC Carrier Board. Initial support includes: - Serial console - eMMC - SD card Signed-off-by: Bhavin Sharma <bhavin.sharma@siliconsignals.io> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04arm64: dts: imx8: move samsung,burst-clock-frequency to imx8mn and imx8mm ↵Frank Li
mba8mx board file Move 'samsung,burst-clock-frequency' and 'samsung,esc-clock-frequency' properties to i.MX8MN and i.MX8MM mba8mx board file. These properties are not applicable to i.MX8MQ MIPI DSI, which uses the compatible string 'fsl,imx8mq-nwl-dsi'. The properties are only valid for i.MX8MM and i.MX8MN devices with the compatible string 'fsl,imx8mm-mipi-dsim', as described in samsung,mipi-dsim.yaml. Fix warning: arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtb: dsi@30a00000: Unevaluated properties are not allowed ('ports', 'samsung,burst-clock-frequency', 'samsung,esc-clock-frequency' were unexpected) from schema $id: http://devicetree.org/schemas/display/bridge/nwl-dsi.yaml# Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04arm64: dts: mba8mx: remove undocumented 'data-lanes' at panelFrank Li
'data-lanes' is port0 of lvds bridge. Needn't set it for simple panel. Fix below CHECK_DTBS warning: arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtb: panel-lvds: port:endpoint: Unevaluated properties are not allowed ('data-lanes' was unexpected) from schema $id: http://devicetree.org/schemas/display/panel/panel-simple.yaml# Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04arm64: dts: imx: Add i.MX8M Plus Gateworks GW82XX-2X supportTim Harvey
The Gateworks GW82XX-2X is an ARM based single board computer (SBC) comprised of the i.MX8M Plus based gw702x SoM and the gw82xx baseboard featuring: - i.MX8M Plus SoC - LPDDR4 DRAM - eMMC FLASH - Gateworks System Controller (GSC) - microSD (1.8V/3.3V Capable) - panel status bi-color LED - pushbutton switch - fan controller with tachometer - USB Type-C connector - PCIe switch - 2x GbE RJ45 connectors - multi-protocol RS232/RS485/RS422 Serial ports - 2x Flexible Socket Adapters with SDIO/UART/USB/PCIe (for M.2 and miniPCIe expansion) - 2x isolated CAN - GPS - accelerometer - magnetometer - off-board connectors for: SPI, GPIO, I2C, ADC - Wide range DC power input - support for 802.3at PoE (via adapter) Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04arm64: dts: imx8ulp-evk: Add spdif sound card supportShengjiu Wang
Add spdif sound card support, configure the pinmux. This sound card supports only playback sound through HDMI interface. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04arm64: dts: imx8ulp-evk: Add bt-sco sound card supportShengjiu Wang
Add bt-sco sound card, which is used by BT HFP case. It supports wb profile as default Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04arm64: dts: imx8ulp: Add audio device nodesShengjiu Wang
Add edma1, sai4, sai5 device nodes bus of in per_bridge3. Add edma2, sai6, sai7, spdif device nodes in bus of per_bridge5. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04arm64: dts: imx8qm-mek: enable dsp node for rproc usageLaurentiu Mihalcea
Set the status of the dsp node to "okay" and assign and add its reserved memory regions. Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com> Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04arm64: dts: imx8qm: add node for VPU dspLaurentiu Mihalcea
Add DT node for i.MX8QM's DSP, which is found in the VPU subsystem. Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com> Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04arm64: dts: imx8qm: drop dsp node from audio_subsys busLaurentiu Mihalcea
On i.MX8QM, the DSP is in the VPU subsystem, which means that using the 'dsp' node from 'imx8-ss-audio.dtsi' is wrong as it's placed under the wrong bus. As such, drop it. Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com> Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04arm64: dts: imx8qxp-mek: add dsp rproc-related mem regionsLaurentiu Mihalcea
Add missing dsp rproc-related reserved memory regions and assign them to the 'dsp' node. Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com> Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04arm64: dts: imx8-ss-audio: configure dsp node for rproc usageLaurentiu Mihalcea
The 'dsp' node is currently configured for running an audio firmware. Since the firmware requires that some audio-related IPs be disabled in Linux, this will clash with the configurations from the imx8 board DTs (i.e: imx8qm-mek, imx8qxp-mek, etc...), thus making the dsp unusable (since the firmware won't function properly). To avoid this issue, configure the 'dsp' node for rproc. This way, users will be able to use the dsp alongside the board-level audio configuration as long as the firmware doesn't need the audio IPs. Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com> Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04ARM: imx_v6_v7_defconfig: Enable drivers for Kobo Clara 2EAndreas Kemnade
Enable drivers used on Kobo Clara 2E Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04ARM: dts: imx: Add devicetree for Kobo Clara 2EAndreas Kemnade
Adds a devicetree for the Kobo Clara 2E Ebook reader. It is based on boards marked with "37NB-E60K2M+4A2" or "37NB-E60K2M+4B0". It is equipped with an i.MX6SLL SoC. Expected to work: - Buttons - Wifi - Bluetooth (if Wifi is initialized first, driver does not handle regulators yet) - LED - uSD - USB - RTC - Touchscreen Add human-readable comments for devices without mainlined driver and binding. Such comments can e.g. be help to find testers if someone starts to work on the missing drivers. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-04powerpc/vdso: Drop -mstack-protector-guard flags in 32-bit files with clangNathan Chancellor
Under certain conditions, the 64-bit '-mstack-protector-guard' flags may end up in the 32-bit vDSO flags, resulting in build failures due to the structure of clang's argument parsing of the stack protector options, which validates the arguments of the stack protector guard flags unconditionally in the frontend, choking on the 64-bit values when targeting 32-bit: clang: error: invalid value 'r13' in 'mstack-protector-guard-reg=', expected one of: r2 clang: error: invalid value 'r13' in 'mstack-protector-guard-reg=', expected one of: r2 make[3]: *** [arch/powerpc/kernel/vdso/Makefile:85: arch/powerpc/kernel/vdso/vgettimeofday-32.o] Error 1 make[3]: *** [arch/powerpc/kernel/vdso/Makefile:87: arch/powerpc/kernel/vdso/vgetrandom-32.o] Error 1 Remove these flags by adding them to the CC32FLAGSREMOVE variable, which already handles situations similar to this. Additionally, reformat and align a comment better for the expanding CONFIG_CC_IS_CLANG block. Cc: stable@vger.kernel.org # v6.1+ Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/20241030-powerpc-vdso-drop-stackp-flags-clang-v1-1-d95e7376d29c@kernel.org
2024-11-03Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2024-10-31 We've added 13 non-merge commits during the last 16 day(s) which contain a total of 16 files changed, 710 insertions(+), 668 deletions(-). The main changes are: 1) Optimize and homogenize bpf_csum_diff helper for all archs and also add a batch of new BPF selftests for it, from Puranjay Mohan. 2) Rewrite and migrate the test_tcp_check_syncookie.sh BPF selftest into test_progs so that it can be run in BPF CI, from Alexis Lothoré. 3) Two BPF sockmap selftest fixes, from Zijian Zhang. 4) Small XDP synproxy BPF selftest cleanup to remove IP_DF check, from Vincent Li. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: selftests/bpf: Add a selftest for bpf_csum_diff() selftests/bpf: Don't mask result of bpf_csum_diff() in test_verifier bpf: bpf_csum_diff: Optimize and homogenize for all archs net: checksum: Move from32to16() to generic header selftests/bpf: remove xdp_synproxy IP_DF check selftests/bpf: remove test_tcp_check_syncookie selftests/bpf: test MSS value returned with bpf_tcp_gen_syncookie selftests/bpf: add ipv4 and dual ipv4/ipv6 support in btf_skc_cls_ingress selftests/bpf: get rid of global vars in btf_skc_cls_ingress selftests/bpf: add missing ns cleanups in btf_skc_cls_ingress selftests/bpf: factorize conn and syncookies tests in a single runner selftests/bpf: Fix txmsg_redir of test_txmsg_pull in test_sockmap selftests/bpf: Fix msg_verify_data in test_sockmap ==================== Link: https://patch.msgid.link/20241031221543.108853-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-03Merge tag 'x86-urgent-2024-11-03' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Thomas Gleixner: "A trivial compile test fix for x86: When CONFIG_AMD_NB is not set a COMPILE_TEST of an AMD specific driver fails due to a missing inline stub. Add the stub to cure it" * tag 'x86-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/amd_nb: Fix compile-testing without CONFIG_AMD_NB
2024-11-03arm64: defconfig: Enable VBATTB clock and Renesas RTCA-3Claudiu Beznea
Enable the Renesas VBATTB clock and RTCA-3 RTC drivers. These are available on the Renesas RZ/G3S SoC. VBATTB is the clock provider for the RTC counter. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/20241101095720.2247815-10-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-11-03arm64: dts: renesas: rzg3s-smarc-som: Enable RTCClaudiu Beznea
Enable RTC. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/20241101095720.2247815-9-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-11-03arm64: dts: renesas: rzg3s-smarc-som: Enable VBATTBClaudiu Beznea
Enable the VBATTB controller. It provides the clock for RTC. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/20241101095720.2247815-8-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-11-03arm64: dts: renesas: r9a08g045: Add RTC nodeClaudiu Beznea
Add the DT node for the RTC IP available on the Renesas RZ/G3S SoC. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/20241101095720.2247815-7-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-11-03arm64: dts: renesas: r9a08g045: Add VBATTB nodeClaudiu Beznea
Add the DT node for the VBATTB IP along with DT bindings for the clock it provides. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/20241101095720.2247815-6-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-11-03arm64: dts: renesas: white-hawk-cpu-common: Add pin control for DSI-eDP IRQGeert Uytterhoeven
When the DSI to eDP bridge was added, pin control for the IRQ pin was left out, because the pin controller did not support INTC-EX pins yet. Commit 10544ec1b3436037 ("pinctrl: renesas: r8a779g0: Add INTC-EX pins, groups, and function") added support for these pins, so add the missing pin control description. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/89bab2008891be1f003a3c0dbcdf36af3b98da70.1729240573.git.geert+renesas@glider.be
2024-11-03ARM: dts: renesas: r7s72100: Add DMA support to MMCIFWolfram Sang
Add DMA properties to the device node for the MMC Host Interface. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20241015224801.2535-6-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-11-03ARM: dts: renesas: r7s72100: Add DMAC nodeWolfram Sang
Add a device node for the Direct Memory Access Controller on the RZ/A1H SoC. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20241015224801.2535-5-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-11-03arm64: dts: renesas: hihope: Drop #sound-dai-cellsLad Prabhakar
"#sound-dai-cells" is required if the board is using "simple-card". However, the HiHope board uses "audio-graph", thus remove the unneeded `#sound-dai-cells`. Commit 9e72606cd2db ("arm64: dts: renesas: #sound-dai-cells is used when simple-card") updated the comment regarding usage of "#sound-dai-cells" in the SoC DTSI but missed to remove "#sound-dai-cells" from board DTS files. Fixes: 9e72606cd2db ("arm64: dts: renesas: #sound-dai-cells is used when simple-card") Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/20241010135332.710648-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-11-03convert spu_run(2)Al Viro
all failure exits prior to fdget() are returns, fdput() is immediately followed by return. Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2024-11-03switch spufs_calls_{get,put}() to CLASS() useAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit (git 2.34.1) at 2025-09-23 06:58:42 +0000