| Age | Commit message (Collapse) | Author |
|---|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Remove compatible string in overlay file to fix below warning:
'gw,imx8mm-gw73xx-0x' is not one of ['fsl,ls1043a-rdb', 'fsl,ls1043a-qds']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add i.MX93 LPSPI alias for kernel LPSPI driver usage.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add i.MX8ULP LPSPI alias for kernel LPSPI driver usage.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add i.MX8DXL LPSPI alias for kernel LPSPI driver usage.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add i.MX8QM LPSPI alias for kernel LPSPI driver usage.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add i.MX8QXP LPSPI alias for kernel LPSPI driver usage.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
make dtbs_check has below warning:
arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dtb: usbphy@20c9000: fsl,tx-d-cal: 5 is less than the minimum of 79
from schema $id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml#
According to schema, valid value of fsl,tx-d-cal is from 79 to 119. This
will convert register raw value <0x5> to corresponding <106>.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Make fsl,imx8qxp-usbphy compatible with fsl,imx7ulp-usbphy to fix below
warning:
arch/arm64/boot/dts/freescale/imx8qxp-colibri-aster.dtb: usbphy@5b100000: 'nxp,sim' is a required property
from schema $id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml#
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Make fsl,imx8qm-usbphy compatible with fsl,imx7ulp-usbphy to fix below
warning:
arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dtb: usbphy@5b100000: 'nxp,sim' is a required property
from schema $id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml#
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Make fsl,imx8dxl-usbphy compatible with fsl,imx7ulp-usbphy to fix below
warning:
arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: usbphy@5b100000: 'nxp,sim' is a required property
from schema $id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml#
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc6).
Conflicts:
drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c
cbe84e9ad5e2 ("wifi: iwlwifi: mvm: really send iwl_txpower_constraints_cmd")
188a1bf89432 ("wifi: mac80211: re-order assigning channel in activate links")
https://lore.kernel.org/all/20241028123621.7bbb131b@canb.auug.org.au/
net/mac80211/cfg.c
c4382d5ca1af ("wifi: mac80211: update the right link for tx power")
8dd0498983ee ("wifi: mac80211: Fix setting txpower with emulate_chanctx")
drivers/net/ethernet/intel/ice/ice_ptp_hw.h
6e58c3310622 ("ice: fix crash on probe for DPLL enabled E810 LOM")
e4291b64e118 ("ice: Align E810T GPIO to other products")
ebb2693f8fbd ("ice: Read SDP section from NVM for pin definitions")
ac532f4f4251 ("ice: Cleanup unused declarations")
https://lore.kernel.org/all/20241030120524.1ee1af18@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Improper use of userspace_irqchip_in_use led to syzbot hitting the
following WARN_ON() in kvm_timer_update_irq():
WARNING: CPU: 0 PID: 3281 at arch/arm64/kvm/arch_timer.c:459
kvm_timer_update_irq+0x21c/0x394
Call trace:
kvm_timer_update_irq+0x21c/0x394 arch/arm64/kvm/arch_timer.c:459
kvm_timer_vcpu_reset+0x158/0x684 arch/arm64/kvm/arch_timer.c:968
kvm_reset_vcpu+0x3b4/0x560 arch/arm64/kvm/reset.c:264
kvm_vcpu_set_target arch/arm64/kvm/arm.c:1553 [inline]
kvm_arch_vcpu_ioctl_vcpu_init arch/arm64/kvm/arm.c:1573 [inline]
kvm_arch_vcpu_ioctl+0x112c/0x1b3c arch/arm64/kvm/arm.c:1695
kvm_vcpu_ioctl+0x4ec/0xf74 virt/kvm/kvm_main.c:4658
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__arm64_sys_ioctl+0x108/0x184 fs/ioctl.c:893
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x78/0x1b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0xe8/0x1b0 arch/arm64/kernel/syscall.c:132
do_el0_svc+0x40/0x50 arch/arm64/kernel/syscall.c:151
el0_svc+0x54/0x14c arch/arm64/kernel/entry-common.c:712
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598
The following sequence led to the scenario:
- Userspace creates a VM and a vCPU.
- The vCPU is initialized with KVM_ARM_VCPU_PMU_V3 during
KVM_ARM_VCPU_INIT.
- Without any other setup, such as vGIC or vPMU, userspace issues
KVM_RUN on the vCPU. Since the vPMU is requested, but not setup,
kvm_arm_pmu_v3_enable() fails in kvm_arch_vcpu_run_pid_change().
As a result, KVM_RUN returns after enabling the timer, but before
incrementing 'userspace_irqchip_in_use':
kvm_arch_vcpu_run_pid_change()
ret = kvm_arm_pmu_v3_enable()
if (!vcpu->arch.pmu.created)
return -EINVAL;
if (ret)
return ret;
[...]
if (!irqchip_in_kernel(kvm))
static_branch_inc(&userspace_irqchip_in_use);
- Userspace ignores the error and issues KVM_ARM_VCPU_INIT again.
Since the timer is already enabled, control moves through the
following flow, ultimately hitting the WARN_ON():
kvm_timer_vcpu_reset()
if (timer->enabled)
kvm_timer_update_irq()
if (!userspace_irqchip())
ret = kvm_vgic_inject_irq()
ret = vgic_lazy_init()
if (unlikely(!vgic_initialized(kvm)))
if (kvm->arch.vgic.vgic_model !=
KVM_DEV_TYPE_ARM_VGIC_V2)
return -EBUSY;
WARN_ON(ret);
Theoretically, since userspace_irqchip_in_use's functionality can be
simply replaced by '!irqchip_in_kernel()', get rid of the static key
to avoid the mismanagement, which also helps with the syzbot issue.
Cc: <stable@vger.kernel.org>
Reported-by: syzbot <syzkaller@googlegroups.com>
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
This family 5 CPU escaped notice when cleaning up all the family 6
CPUs.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20241031185733.17327-1-tony.luck%40intel.com
|
|
Start reprogramming PMU events at nested boundaries now that everything
is in place to handle the EL2 event filter. Only repaint events where
the filter differs between EL1 and EL2 as a slight optimization.
PMU now 'works' for nested VMs, albeit slow.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182559.3364829-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
It hopefully comes as no surprise when I say that vEL2 actually runs at
EL1. So, the guest hypervisor's EL2 event filter (NSH) needs to actually
be applied to EL1 in the perf event. In addition to this, the disable
bit for the guest counter range (HPMD) needs to have the effect of
stopping the affected counters.
Do exactly that by stuffing ::exclude_kernel with the combined effect of
these controls. This isn't quite enough yet, as the backing perf events
need to be reprogrammed upon nested ERET/exception entry to remap the
effective filter onto ::exclude_kernel.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-18-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Counters that fall in the hypervisor range (i.e. N >= HPMN) have a
separate control for enabling 64 bit overflow. Take it into account.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-17-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
When the PMU is configured with split counter ranges, HPME becomes the
enable bit for the counters reserved for EL2.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-16-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Checking the exception level filters for a PMC is a minor annoyance to
open code. Add helpers to check if an event counts at EL0 and EL1, which
will prove useful in a subsequent change.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-15-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The value of MDCR_EL2.HPMN controls the number of event counters made
visible to EL0 and EL1. This means it is possible for the guest
hypervisor to allow direct access to event counters to the L2.
Rework KVM's PMU register emulation to take the effects of HPMN into
account when handling a trap. For bitmask-style registers, writes only
affect accessible registers.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-14-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Nested PMU support requires dynamically changing the visible range of
PMU counters based on the exception level and value of MDCR_EL2.HPMN. At
the same time, the PMU emulation code needs to know the absolute number
of implemented counters, regardless of context.
Rename the existing helper to make it obvious that it returns the number
of implemented counters and not anything else.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-13-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Everything is in place now for KVM to actually handle MDCR_EL2.HPMN. Not
only that, the emulation is capable of doing FEAT_HPMN0. Advertise
support for the feature in the VM's ID registers. It is possible to
emulate FEAT_HPMN0 on hardware that doesn't support it since KVM
currently traps all PMU registers. Having said that, let's only
advertise the feature on supporting hardware in case KVM ever provides
'direct' PMU support to VMs w/o involving host perf.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-12-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
MDCR_EL2.HPMN splits the PMU event counters into two ranges: the first
range is accessible from all ELs, and the second range is accessible
only to EL2/3. Supposing the guest hypervisor allows direct access to
the PMU counters from the L2, KVM needs to locally handle those
accesses.
Add a new complex trap configuration for HPMN that checks if the counter
index is accessible to the current context. As written, the architecture
suggests HPMN only causes PMEVCNTR<n>_EL0 to trap, though intuition (and
the pseudocode) suggest that the trap applies to PMEVTYPER<n>_EL0 as
well.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-11-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
TPM and TPMCR trap bits also affect Host EL0. How fun.
Mark these two trap bits as such and take advantage of the new
infrastructure for dealing w/ EL0 traps.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-10-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Wire up the other end of traps that affect host EL0 by actually
injecting them into the guest hypervisor. Skip over FGT entirely, as a
cursory glance suggests no FGT is effective in host EL0.
Note that kvm_inject_nested() is already equipped for handling
exceptions while the VM is already in a host context.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-9-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
BEHAVE_FORWARD_ANY is slightly ambiguous, especially since we're about
to cram some more information into the enum. Rephrase it.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-8-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
KVM uses a sanity-check to avoid infinite recursion in trap combinations
that could potentially depend on itself. Narrow the scope of this sanity
check to the exact CGT IDs that correspond w/ trap combos, opening the
door to using 'complex' traps as part of a combination.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-7-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add support for sanitising MDCR_EL2 and describe the RES0/RES1 bits
according to the feature set exposed to the VM.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-6-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Align the field definitions w/ DDI0601 2024-09 and opportunistically
declare MTPMU as a signed field.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Migrate MDCR_EL2 over to the sysreg table and align definitions with
DDI0601 2024-09.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-4-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Describe the new ID register in line with DDI0601 2024-09.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Handle the initialization of trap registers at the hypervisor in
pKVM, even for non-protected guests. The host is not trusted with
the values of the trap registers, regardless of the VM type.
Therefore, when switching between the host and the guests, only
flush the HCR_EL2 TWI and TWE bits. The host is allowed to
configure these for opportunistic scheduling, as neither affects
the protection of VMs or the hypervisor.
Reported-by: Will Deacon <will@kernel.org>
Fixes: 814ad8f96e92 ("KVM: arm64: Drop trapping of PAuth instructions/keys")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241018074833.2563674-5-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Do not trust the state of the VM as provided by the host when
initializing the hypervisor's view of the VM sate. Initialize it
instead at EL2 to a known good and safe state, as pKVM already
does with hypervisor VCPU states.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241018074833.2563674-4-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Move kvm_vcpu_enable_ptrauth() to a shared header to be used by
hypervisor code in protected mode.
No functional change intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241018074833.2563674-3-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Move pkvm_vcpu_init_traps() to the initialization of the
hypervisor's vcpu state in init_pkvm_hyp_vcpu(), and remove the
associated hypercall.
In protected mode, traps need to be initialized whenever a VCPU
is initialized anyway, and not only for protected VMs. This also
saves an unnecessary hypercall.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241018074833.2563674-2-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
commit 011e5f5bf529f ("arm64/cpufeature: Add remaining feature bits in
ID_AA64PFR0 register") exposed the MPAM field of AA64PFR0_EL1 to guests,
but didn't add trap handling. A previous patch supplied the missing trap
handling.
Existing VMs that have the MPAM field of ID_AA64PFR0_EL1 set need to
be migratable, but there is little point enabling the MPAM CPU
interface on new VMs until there is something a guest can do with it.
Clear the MPAM field from the guest's ID_AA64PFR0_EL1 and on hardware
that supports MPAM, politely ignore the VMMs attempts to set this bit.
Guests exposed to this bug have the sanitised value of the MPAM field,
so only the correct value needs to be ignored. This means the field
can continue to be used to block migration to incompatible hardware
(between MPAM=1 and MPAM=5), and the VMM can't rely on the field
being ignored.
Signed-off-by: James Morse <james.morse@arm.com>
Co-developed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241030160317.2528209-7-joey.gouly@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The sys_reg_descs array holds function pointers and reset value for
managing the user-space and guest view of system registers. These
are mostly created by a set of macro's as only some combinations
of behaviour are needed.
If a register needs special treatment, its sys_reg_descs entry is
open-coded. This is true of some id registers where the value provided
by user-space is validated by some helpers.
Before adding another one of these, add a helper that covers the
existing special cases. 'ID_FILTERED' expects helpers to set the
user-space value, and retrieve the modified reset value.
Like ID_WRITABLE() this uses id_visibility(), which should have no
functional change for the registers converted to use ID_FILTERED().
read_sanitised_id_aa64dfr0_el1() and read_sanitised_id_aa64pfr0_el1()
have been refactored to be called from kvm_read_sanitised_id_reg(), to
try be consistent with ID_WRITABLE().
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241030160317.2528209-6-joey.gouly@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
commit 011e5f5bf529f ("arm64/cpufeature: Add remaining feature bits in
ID_AA64PFR0 register") exposed the MPAM field of AA64PFR0_EL1 to guests,
but didn't add trap handling.
If you are unlucky, this results in an MPAM aware guest being delivered
an undef during boot. The host prints:
| kvm [97]: Unsupported guest sys_reg access at: ffff800080024c64 [00000005]
| { Op0( 3), Op1( 0), CRn(10), CRm( 5), Op2( 0), func_read },
Which results in:
| Internal error: Oops - Undefined instruction: 0000000002000000 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.0-rc7-00559-gd89c186d50b2 #14616
| Hardware name: linux,dummy-virt (DT)
| pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : test_has_mpam+0x18/0x30
| lr : test_has_mpam+0x10/0x30
| sp : ffff80008000bd90
...
| Call trace:
| test_has_mpam+0x18/0x30
| update_cpu_capabilities+0x7c/0x11c
| setup_cpu_features+0x14/0xd8
| smp_cpus_done+0x24/0xb8
| smp_init+0x7c/0x8c
| kernel_init_freeable+0xf8/0x280
| kernel_init+0x24/0x1e0
| ret_from_fork+0x10/0x20
| Code: 910003fd 97ffffde 72001c00 54000080 (d538a500)
| ---[ end trace 0000000000000000 ]---
| Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
| ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
Add the support to enable the traps, and handle the three guest accessible
registers by injecting an UNDEF. This stops KVM from spamming the host
log, but doesn't yet hide the feature from the id registers.
With MPAM v1.0 we can trap the MPAMIDR_EL1 register only if
ARM64_HAS_MPAM_HCR, with v1.1 an additional MPAM2_EL2.TIDR bit traps
MPAMIDR_EL1 on platforms that don't have MPAMHCR_EL2. Enable one of
these if either is supported. If neither is supported, the guest can
discover that the CPU has MPAM support, and how many PARTID etc the
host has ... but it can't influence anything, so its harmless.
Fixes: 011e5f5bf529f ("arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register")
CC: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/linux-arm-kernel/20200925160102.118858-1-james.morse@arm.com/
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241030160317.2528209-5-joey.gouly@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
ARMv8.4 adds support for 'Memory Partitioning And Monitoring' (MPAM)
which describes an interface to cache and bandwidth controls wherever
they appear in the system.
Add support to detect MPAM. Like SVE, MPAM has an extra id register that
describes some more properties, including the virtualisation support,
which is optional. Detect this separately so we can detect
mismatched/insane systems, but still use MPAM on the host even if the
virtualisation support is missing.
MPAM needs enabling at the highest implemented exception level, otherwise
the register accesses trap. The 'enabled' flag is accessible to lower
exception levels, but its in a register that traps when MPAM isn't enabled.
The cpufeature 'matches' hook is extended to test this on one of the
CPUs, so that firmware can emulate MPAM as disabled if it is reserved
for use by secure world.
Secondary CPUs that appear late could trip cpufeature's 'lower safe'
behaviour after the MPAM properties have been advertised to user-space.
Add a verify call to ensure late secondaries match the existing CPUs.
(If you have a boot failure that bisects here its likely your CPUs
advertise MPAM in the id registers, but firmware failed to either enable
or MPAM, or emulate the trap as if it were disabled)
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241030160317.2528209-4-joey.gouly@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add code to head.S's el2_setup to detect MPAM and disable any EL2 traps.
This register resets to an unknown value, setting it to the default
parititons/pmg before we enable the MMU is the best thing to do.
Kexec/kdump will depend on this if the previous kernel left the CPU
configured with a restrictive configuration.
If linux is booted at the highest implemented exception level el2_setup
will clear the enable bit, disabling MPAM.
This code can't be enabled until a subsequent patch adds the Kconfig
and cpufeature boiler plate.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241030160317.2528209-3-joey.gouly@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Move the existing MPAM system register defines from sysreg.h to
tools/sysreg and add the remaining system registers.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241030160317.2528209-2-joey.gouly@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The FML13V01 board from DeepComputing incorporates a StarFive JH7110 SoC.
It is a mainboard designed for the Framework Laptop 13 Chassis, which has
(Framework) SKU FRANHQ0001.
The FML13V01 board features:
- StarFive JH7110 SoC
- LPDDR4 8GB
- eMMC 32GB or 128GB
- QSPI Flash
- MicroSD Slot
- PCIe-based Wi-Fi
- 4 USB-C Ports
- Port 1: PD 3.0 (60W Max), USB 3.2 Gen 1, DP 1.4 (4K@30Hz/2.5K@60Hz)
- Port 2: PD 3.0 (60W Max), USB 3.2 Gen 1
- Port 3 & 4: USB 3.2 Gen 1
Create the DTS file for the DeepComputing FML13V01 board. Based on
'jh7110-common.dtsi', usb0 is enabled and is set to operate as a "host".
Signed-off-by: Sandie Cao <sandie.cao@deepcomputing.io>
[elder@riscstar.com: revised the description, updated some nodes]
Signed-off-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The JH7110 USB0 can operate as a dual-role USB device. Different
boards can have different configuration.
For all current boards this device operates in peripheral mode, but
on a new board this operates in host mode. This property will no
longer be common, so define the "dr_mode" property in the board files
rather than in the common DTSI file.
Signed-off-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Earlier this year a new DTSI file was created to define common
properties for the StarFive VisionFive 2 and Milk-V Mars boards,
both of which use the StarFive JH7110 SoC. The Pine64 Star64
board has also been added since that time.
Some of the nodes defined in "jh7110-common.dtsi" are enabled in
that file because all of the boards including it "want" them
enabled.
An upcoming patch enables another JH7110 board, but for that
board not all of these common nodes should be enabled. Prepare
for supporting the new board by avoiding enabling these nodes in
"jh7110-common.dtsi", and enable them instead in these files:
jh7110-milkv-mars.dts
jh7110-pine64-star64.dts
jh7110-starfive-visionfive-2.dtsi
Signed-off-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
A new "FRU Text in MCA" feature is defined where the Field Replaceable
Unit (FRU) Text for a device is represented by a string in the new
MCA_SYND1 and MCA_SYND2 registers. This feature is supported per MCA
bank, and it is advertised by the McaFruTextInMca bit (MCA_CONFIG[9]).
The FRU Text is populated dynamically for each individual error state
(MCA_STATUS, MCA_ADDR, et al.). Handle the case where an MCA bank covers
multiple devices, for example, a Unified Memory Controller (UMC) bank
that manages two DIMMs.
[ Yazen: Add Avadhut as co-developer for wrapper changes. ]
[ bp: Do not expose MCA_CONFIG to userspace yet. ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Co-developed-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241022194158.110073-6-avadhut.naik@amd.com
|
|
The flags variable was being used uninitialized.
Initialize it to 0 as expected.
For some reason neither gcc nor clang reported a warning.
Fixes: 05066cafa925 ("s390/mm/fault: Handle guest-related program interrupts in KVM")
Reported-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241030161906.85476-1-imbrenda@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
