summaryrefslogtreecommitdiff
path: root/drivers/base
AgeCommit message (Collapse)Author
2020-03-29drivers/base/memory.c: indicate all memory blocks as removableDavid Hildenbrand
We see multiple issues with the implementation/interface to compute whether a memory block can be offlined (exposed via /sys/devices/system/memory/memoryX/removable) and would like to simplify it (remove the implementation). 1. It runs basically lockless. While this might be good for performance, we see possible races with memory offlining that will require at least some sort of locking to fix. 2. Nowadays, more false positives are possible. No arch-specific checks are performed that validate if memory offlining will not be denied right away (and such check will require locking). For example, arm64 won't allow to offline any memory block that was added during boot - which will imply a very high error rate. Other archs have other constraints. 3. The interface is inherently racy. E.g., if a memory block is detected to be removable (and was not a false positive at that time), there is still no guarantee that offlining will actually succeed. So any caller already has to deal with false positives. 4. It is unclear which performance benefit this interface actually provides. The introducing commit 5c755e9fd813 ("memory-hotplug: add sysfs removable attribute for hotplug memory remove") mentioned "A user-level agent must be able to identify which sections of memory are likely to be removable before attempting the potentially expensive operation." However, no actual performance comparison was included. Known users: - lsmem: Will group memory blocks based on the "removable" property. [1] - chmem: Indirect user. It has a RANGE mode where one can specify removable ranges identified via lsmem to be offlined. However, it also has a "SIZE" mode, which allows a sysadmin to skip the manual "identify removable blocks" step. [2] - powerpc-utils: Uses the "removable" attribute to skip some memory blocks right away when trying to find some to offline+remove. However, with ballooning enabled, it already skips this information completely (because it once resulted in many false negatives). Therefore, the implementation can deal with false positives properly already. [3] According to Nathan Fontenot, DLPAR on powerpc is nowadays no longer driven from userspace via the drmgr command (powerpc-utils). Nowadays it's managed in the kernel - including onlining/offlining of memory blocks - triggered by drmgr writing to /sys/kernel/dlpar. So the affected legacy userspace handling is only active on old kernels. Only very old versions of drmgr on a new kernel (unlikely) might execute slower - totally acceptable. With CONFIG_MEMORY_HOTREMOVE, always indicating "removable" should not break any user space tool. We implement a very bad heuristic now. Without CONFIG_MEMORY_HOTREMOVE we cannot offline anything, so report "not removable" as before. Original discussion can be found in [4] ("[PATCH RFC v1] mm: is_mem_section_removable() overhaul"). Other users of is_mem_section_removable() will be removed next, so that we can remove is_mem_section_removable() completely. [1] http://man7.org/linux/man-pages/man1/lsmem.1.html [2] http://man7.org/linux/man-pages/man8/chmem.8.html [3] https://github.com/ibm-power-utilities/powerpc-utils [4] https://lkml.kernel.org/r/20200117105759.27905-1-david@redhat.com Also, this patch probably fixes a crash reported by Steve. http://lkml.kernel.org/r/CAPcyv4jpdaNvJ67SkjyUJLBnBnXXQv686BiVW042g03FUmWLXw@mail.gmail.com Reported-by: "Scargall, Steve" <steve.scargall@intel.com> Suggested-by: Michal Hocko <mhocko@kernel.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Nathan Fontenot <ndfont@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Karel Zak <kzak@redhat.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200128093542.6908-1-david@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-27Revert "driver core: Set fw_devlink to "permissive" behavior by default"Greg Kroah-Hartman
This reverts commit c442a0d18744d4a5857d513f171d68ed6a54df5b as it breaks some of the Raspberry Pi devices. Marek writes: This patch has just landed in linux-next 20200326. Sadly it breaks booting of the Raspberry Pi3b and Pi4 boards, either in 32bit or 64bit mode. There is no warning nor panic message, just a silent freeze. The last message shown on the earlycon is: [    0.893217] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled so revert it for now and let's try again and add it to linux-next after 5.7-rc1 is out so that we can try to get more debugging/testing happening. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Saravana Kannan <saravanak@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25cpu/hotplug: Hide cpu_up/down()Qais Yousef
Use separate functions for the device core to bring a CPU up and down. Users outside the device core must use add/remove_cpu() which will take care of extra housekeeping work like keeping sysfs in sync. Make cpu_up/down() static and replace the extra layer of indirection. [ tglx: Removed the extra wrapper functions and adjusted function names ] Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200323135110.30522-18-qais.yousef@arm.com
2020-03-25PM: sleep: wakeup: Skip wakeup_source_sysfs_remove() if device is not thereNeeraj Upadhyay
Skip wakeup_source_sysfs_remove() to fix a NULL pinter dereference via ws->dev, if the wakeup source is unregistered before registering the wakeup class from device_add(). Fixes: 2ca3d1ecb8c4 ("PM / wakeup: Register wakeup class kobj after device is added") Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ [ rjw: Subject & changelog, white space ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-24driver core: Set fw_devlink to "permissive" behavior by defaultSaravana Kannan
Set fw_devlink to "permissive" behavior by default so that device links are automatically created (with DL_FLAG_SYNC_STATE_ONLY) by scanning the firmware. This ensures suppliers get their sync_state() calls only after all their consumers have probed successfully. Without this, suppliers will get their sync_state() calls at late_initcall_sync() even if their consuer Ideally, we'd want to set fw_devlink to "on" or "rpm" by default. But that needs more testing as it's known to break some corner case drivers/platforms. Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: devicetree@vger.kernel.org Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20200321210305.28937-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24driver core: Replace open-coded list_last_entry()Andy Shevchenko
There is a place in the code where open-coded version of list entry accessors list_last_entry() is used. Replace that with the standard macro. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200324122023.9649-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24driver core: Read atomic counter once in driver_probe_done()Andy Shevchenko
Between printing the debug message and actual check atomic counter can be altered. For better debugging experience read atomic counter value only once. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Ferry Toth <fntoth@gmail.com> Link: https://lore.kernel.org/r/20200324122023.9649-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24driver core: platform: Reimplement devm_platform_ioremap_resourceDejin Zheng
Reimplement devm_platform_ioremap_resource() by calling devm_platform_ioremap_and_get_resource() with res = NULL to simplify the code. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Link: https://lore.kernel.org/r/20200323160612.17277-6-zhengdejin5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24drivers: provide devm_platform_get_and_ioremap_resource()Dejin Zheng
Since commit "drivers: provide devm_platform_ioremap_resource()", it was wrap platform_get_resource() and devm_ioremap_resource() as single helper devm_platform_ioremap_resource(). but now, many drivers still used platform_get_resource() and devm_ioremap_resource() together in the kernel tree. The reason can not be replaced is they still need use the resource variables obtained by platform_get_resource(). so provide this helper. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Link: https://lore.kernel.org/r/20200323160612.17277-2-zhengdejin5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-23Merge 5.6-rc7 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-21driver core: Add device links from fwnode only for the primary deviceSaravana Kannan
Sometimes, more than one (generally two) device can point to the same fwnode. However, only one device is set as the fwnode's device (fwnode->dev) and can be looked up from the fwnode. Typically, only one of these devices actually have a driver and actually probe. If we create device links for all these devices, then the suppliers' of these devices (with the same fwnode) will never get a sync_state() call because one of their consumer devices will never probe (because they don't have a driver). So, create device links only for the device that is considered as the fwnode's device. One such example of this is the PCI bridge platform_device and the corresponding pci_bus device. Both these devices will have the same fwnode. It's the platform_device that is registered first and is set as the fwnode's device. Also the platform_device is the one that actually probes. Without this patch none of the suppliers of a PCI bridge platform_device would get a sync_state() callback. Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20200321045448.15192-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-20firmware: Add new platform fallback mechanism and firmware_request_platform()Hans de Goede
In some cases the platform's main firmware (e.g. the UEFI fw) may contain an embedded copy of device firmware which needs to be (re)loaded into the peripheral. Normally such firmware would be part of linux-firmware, but in some cases this is not feasible, for 2 reasons: 1) The firmware is customized for a specific use-case of the chipset / use with a specific hardware model, so we cannot have a single firmware file for the chipset. E.g. touchscreen controller firmwares are compiled specifically for the hardware model they are used with, as they are calibrated for a specific model digitizer. 2) Despite repeated attempts we have failed to get permission to redistribute the firmware. This is especially a problem with customized firmwares, these get created by the chip vendor for a specific ODM and the copyright may partially belong with the ODM, so the chip vendor cannot give a blanket permission to distribute these. This commit adds a new platform fallback mechanism to the firmware loader which will try to lookup a device fw copy embedded in the platform's main firmware if direct filesystem lookup fails. Drivers which need such embedded fw copies can enable this fallback mechanism by using the new firmware_request_platform() function. Note that for now this is only supported on EFI platforms and even on these platforms firmware_fallback_platform() only works if CONFIG_EFI_EMBEDDED_FIRMWARE is enabled (this gets selected by drivers which need this), in all other cases firmware_fallback_platform() simply always returns -ENOENT. Reported-by: Dave Olsthoorn <dave@bewaar.me> Suggested-by: Peter Jones <pjones@redhat.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200115163554.101315-5-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-19Revert "drivers: base: power: wakeup.c: Use built-in RCU list checking"Greg Kroah-Hartman
This reverts commit 8ba88804bb3b877c841bc1864a8605111580cd0b as a better version is already in Rafael's tree, sorry about that. Reported-by: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18drivers: base: power: wakeup.c: Use built-in RCU list checkingMadhuparna Bhowmik
Pass cond argument to list_for_each_entry_rcu() to fix the following false positive lockdep warning and other uses of list_for_each_entry_rcu() in wakeup.c. [ 331.934648] ============================= [ 331.934650] WARNING: suspicious RCU usage [ 331.934653] 5.6.0-rc1+ #5 Not tainted [ 331.934655] ----------------------------- [ 331.934657] drivers/base/power/wakeup.c:408 RCU-list traversed in non-reader section!! [ 333.025156] ============================= [ 333.025161] WARNING: suspicious RCU usage [ 333.025168] 5.6.0-rc1+ #5 Not tainted [ 333.025173] ----------------------------- [ 333.025180] drivers/base/power/wakeup.c:424 RCU-list traversed in non-reader section!! Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Link: https://lore.kernel.org/r/20200228174745.9308-1-madhuparnabhowmik10@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18component: allow missing unbind callbackMarco Felsch
The component framework reuses the devres managed functions. There is no need to specify an unbind() callback if the driver only wants to release the devres managed resources. The bind/unbind is like the probe/remove pair. The bind/probe is necessary and the unbind/remove is optional. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20200227104547.30085-1-m.felsch@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18firmware: fix a double abort case with fw_load_sysfs_fallbackJunyong Sun
fw_sysfs_wait_timeout may return err with -ENOENT at fw_load_sysfs_fallback and firmware is already in abort status, no need to abort again, so skip it. This issue is caused by concurrent situation like below: when thread 1# wait firmware loading, thread 2# may write -1 to abort loading and wakeup thread 1# before it timeout. so wait_for_completion_killable_timeout of thread 1# would return remaining time which is != 0 with fw_st->status FW_STATUS_ABORTED.And the results would be converted into err -ENOENT in __fw_state_wait_common and transfered to fw_load_sysfs_fallback in thread 1#. The -ENOENT means firmware status is already at ABORTED, so fw_load_sysfs_fallback no need to get mutex to abort again. ----------------------------- thread 1#,wait for loading fw_load_sysfs_fallback ->fw_sysfs_wait_timeout ->__fw_state_wait_common ->wait_for_completion_killable_timeout in __fw_state_wait_common, ... 93 ret = wait_for_completion_killable_timeout(&fw_st->completion, timeout); 94 if (ret != 0 && fw_st->status == FW_STATUS_ABORTED) 95 return -ENOENT; 96 if (!ret) 97 return -ETIMEDOUT; 98 99 return ret < 0 ? ret : 0; ----------------------------- thread 2#, write -1 to abort loading firmware_loading_store ->fw_load_abort ->__fw_load_abort ->fw_state_aborted ->__fw_state_set ->complete_all in __fw_state_set, ... 111 if (status == FW_STATUS_DONE || status == FW_STATUS_ABORTED) 112 complete_all(&fw_st->completion); ------------------------------------------- BTW,the double abort issue would not cause kernel panic or create an issue, but slow down it sometimes.The change is just a minor optimization. Signed-off-by: Junyong Sun <sunjunyong@xiaomi.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/1583202968-28792-1-git-send-email-sunjunyong@xiaomi.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18arch_topology: Fix putting invalid cpu clkJeffy Chen
Add a sanity check before putting the cpu clk. Fixes: b8fe128dad8f (“arch_topology: Adjust initial CPU capacities with current freq") Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Link: https://lore.kernel.org/r/20200317063308.23209-1-jeffy.chen@rock-chips.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-16device property: Export fwnode_get_name()Heikki Krogerus
This makes it possible to take advantage of the function in the device drivers. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20200302135353.56659-8-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-14PM / Domains: Allow no domain-idle-states DT property in genpd when parsingUlf Hansson
Commit 2c361684803e ("PM / Domains: Don't treat zero found compatible idle states as an error"), moved of_genpd_parse_idle_states() towards allowing none compatible idle state to be found for the device node, rather than returning an error code. However, it didn't consider that the "domain-idle-states" DT property may be missing as it's optional, which makes of_count_phandle_with_args() to return -ENOENT. Let's fix this to make the behaviour consistent. Fixes: 2c361684803e ("PM / Domains: Don't treat zero found compatible idle states as an error") Reported-by: Benjamin Gaignard <benjamin.gaignard@st.com> Cc: 4.20+ <stable@vger.kernel.org> # 4.20+ Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-13regmap: debugfs: check count when read regmap filePeng Fan
When executing the following command, we met kernel dump. dmesg -c > /dev/null; cd /sys; for i in `ls /sys/kernel/debug/regmap/* -d`; do echo "Checking regmap in $i"; cat $i/registers; done && grep -ri "0x02d0" *; It is because the count value is too big, and kmalloc fails. So add an upper bound check to allow max size `PAGE_SIZE << (MAX_ORDER - 1)`. Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1584064687-12964-1-git-send-email-peng.fan@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor overlapping changes, nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11driver code: clarify and fix platform device DMA mask allocationChristoph Hellwig
This does three inter-related things to clarify the usage of the platform device dma_mask field. In the process, fix the bug introduced by cdfee5623290 ("driver core: initialize a default DMA mask for platform device") that caused Artem Tashkinov's laptop to not boot with newer Fedora kernels. This does: - First off, rename the field to "platform_dma_mask" to make it greppable. We have way too many different random fields called "dma_mask" in various data structures, where some of them are actual masks, and some of them are just pointers to the mask. And the structures all have pointers to each other, or embed each other inside themselves, and "pdev" sometimes means "platform device" and sometimes it means "PCI device". So to make it clear in the code when you actually use this new field, give it a unique name (it really should be something even more unique like "platform_device_dma_mask", since it's per platform device, not per platform, but that gets old really fast, and this is unique enough in context). To further clarify when the field gets used, initialize it when we actually start using it with the default value. - Then, use this field instead of the random one-off allocation in platform_device_register_full() that is now unnecessary since we now already have a perfectly fine allocation for it in the platform device structure. - The above then allows us to fix the actual bug, where the error path of platform_device_register_full() would unconditionally free the platform device DMA allocation with 'kfree()'. That kfree() was dont regardless of whether the allocation had been done earlier with the (now removed) kmalloc, or whether setup_pdev_dma_masks() had already been used and the dma_mask pointer pointed to the mask that was part of the platform device. It seems most people never triggered the error path, or only triggered it from a call chain that set an explicit pdevinfo->dma_mask value (and thus caused the unnecessary allocation that was "cleaned up" in the error path) before calling platform_device_register_full(). Robin Murphy points out that in Artem's case the wdat_wdt driver failed in platform_device_add(), and that was the one that had called platform_device_register_full() with pdevinfo.dma_mask = 0, and would have caused that kfree() of pdev.dma_mask corrupting the heap. A later unrelated kmalloc() then oopsed due to the heap corruption. Fixes: cdfee5623290 ("driver core: initialize a default DMA mask for platform device") Reported-bisected-and-tested-by: Artem S. Tashkinov <aros@gmx.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-11cpu-topology: Fix the potential data corruptionZeng Tao
Currently there are only 10 bytes to store the cpu-topology 'name' information. Only 10 bytes copied into cluster/thread/core names. If the cluster ID exceeds 2-digit number, it will result in the data corruption, and ending up in a dead loop in the parsing routines. The same applies to the thread names with more that 3-digit number. This issue was found using the boundary tests under virtualised environment like QEMU. Let us increase the buffer to fix such potential issues. Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com> Link: https://lore.kernel.org/r/1583294092-5929-1-git-send-email-prime.zeng@hisilicon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11arch_topology: Adjust initial CPU capacities with current freqJeffy Chen
The CPU freqs are not supposed to change before cpufreq policies properly registered, meaning that they should be used to calculate the initial CPU capacities. Doing this helps choosing the best CPU during early boot, especially for the initramfs decompressing. There's no functional changes for non-clk CPU DVFS mechanism. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Link: https://lore.kernel.org/r/20200113034815.25924-1-jeffy.chen@rock-chips.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11drivers/base/cpu: Simplify s*nprintf() usagesTakashi Iwai
Use the simpler sprintf() instead of snprintf() or scnprintf() in a single-shot sysfs output callbacks where you are very sure that it won't go over PAGE_SIZE buffer limit. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200311080207.12046-3-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11drivers/base/cpu: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200311080207.12046-2-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-10Merge 5.6-rc5 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-09Merge 5.6-rc5 into driver-core-nextGreg Kroah-Hartman
We need the driver core and debugfs changes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-08Merge tag 'driver-core-5.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs fixes from Greg KH: "Here are four small driver core / debugfs patches for 5.6-rc3: - debugfs api cleanup now that all debugfs_create_regset32() callers have been fixed up. This was waiting until after the -rc1 merge as these fixes came in through different trees - driver core sync state fixes based on reports of minor issues found in the feature All of these have been in linux-next with no reported issues" * tag 'driver-core-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core: Skip unnecessary work when device doesn't have sync_state() driver core: Add dev_has_sync_state() driver core: Call sync_state() even if supplier has no consumers debugfs: remove return value of debugfs_create_regset32()
2020-03-06arm64: use activity monitors for frequency invarianceIonela Voinescu
The Frequency Invariance Engine (FIE) is providing a frequency scaling correction factor that helps achieve more accurate load-tracking. So far, for arm and arm64 platforms, this scale factor has been obtained based on the ratio between the current frequency and the maximum supported frequency recorded by the cpufreq policy. The setting of this scale factor is triggered from cpufreq drivers by calling arch_set_freq_scale. The current frequency used in computation is the frequency requested by a governor, but it may not be the frequency that was implemented by the platform. This correction factor can also be obtained using a core counter and a constant counter to get information on the performance (frequency based only) obtained in a period of time. This will more accurately reflect the actual current frequency of the CPU, compared with the alternative implementation that reflects the request of a performance level from the OS. Therefore, implement arch_scale_freq_tick to use activity monitors, if present, for the computation of the frequency scale factor. The use of AMU counters depends on: - CONFIG_ARM64_AMU_EXTN - depents on the AMU extension being present - CONFIG_CPU_FREQ - the current frequency obtained using counter information is divided by the maximum frequency obtained from the cpufreq policy. While it is possible to have a combination of CPUs in the system with and without support for activity monitors, the use of counters for frequency invariance is only enabled for a CPU if all related CPUs (CPUs in the same frequency domain) support and have enabled the core and constant activity monitor counters. In this way, there is a clear separation between the policies for which arch_set_freq_scale (cpufreq based FIE) is used, and the policies for which arch_scale_freq_tick (counter based FIE) is used to set the frequency scale factor. For this purpose, a late_initcall_sync is registered to trigger validation work for policies that will enable or disable the use of AMU counters for frequency invariance. If CONFIG_CPU_FREQ is not defined, the use of counters is enabled on all CPUs only if all possible CPUs correctly support the necessary counters. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-03-05driver core: fw_devlink_flags can be statickbuild test robot
Fixes: 8375e74f2bca ("driver core: Add fw_devlink kernel commandline option") Signed-off-by: kbuild test robot <lkp@intel.com> Acked-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20200305020916.GA14234@3143ef58ba07 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04Revert "software node: Simplify software_node_release() function"Brendan Higgins
This reverts commit 3df85a1ae51f6b256982fe9d17c2dc5bfb4cc402. The reverted commit says "It's possible to release the node ID immediately when fwnode_remove_software_node() is called, no need to wait for software_node_release() with that." However, releasing the node ID before waiting for software_node_release() to be called causes the node ID to be released before the kobject and the underlying sysfs entry; this means there is a period of time where a sysfs entry exists that is associated with an unallocated node ID. Once consequence of this is that there is a race condition where it is possible to call fwnode_create_software_node() with no parent node specified (NULL) and have it fail with -EEXIST because the node ID that was assigned is still associated with a stale sysfs entry that hasn't been cleaned up yet. Although it is difficult to reproduce this race condition under normal conditions, it can be deterministically reproduced with the following minconfig on UML: CONFIG_KUNIT_DRIVER_PE_TEST=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_OBJECTS=y CONFIG_DEBUG_OBJECTS_TIMERS=y CONFIG_DEBUG_KOBJECT_RELEASE=y CONFIG_KUNIT=y Running the tests with this configuration causes the following failure: <snip> kobject: 'node0' ((____ptrval____)): kobject_release, parent (____ptrval____) (delayed 400) ok 1 - pe_test_uints sysfs: cannot create duplicate filename '/kernel/software_nodes/node0' CPU: 0 PID: 28 Comm: kunit_try_catch Not tainted 5.6.0-rc3-next-20200227 #14 <snip> kobject_add_internal failed for node0 with -EEXIST, don't try to register things with the same name in the same directory. kobject: 'node0' ((____ptrval____)): kobject_release, parent (____ptrval____) (delayed 100) # pe_test_uint_arrays: ASSERTION FAILED at drivers/base/test/property-entry-test.c:123 Expected node is not error, but is: -17 not ok 2 - pe_test_uint_arrays <snip> Reported-by: Heidi Fahim <heidifahim@google.com> Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: 5.3+ <stable@vger.kernel.org> # 5.3+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-04driver core: Add missing annotation for device_links_write_lock()Jules Irenge
Sparse reports a warning at device_links_write_lock() warning: context imbalance in evice_links_write_lock() - wrong count at exit The root cause is the missing annotation at device_links_write_lock() Add the missing __acquires(&device_links_srcu) annotation Signed-off-by: Jules Irenge <jbi.octave@gmail.com> Link: https://lore.kernel.org/r/20200214204741.94112-19-jbi.octave@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04driver core: Add missing annotation for device_links_read_lock()Jules Irenge
Sparse reports a warning at device_links_read_unlock() warning: warning: context imbalance in device_links_read_unlock() - unexpected unlock The root cause is the missing annotation at device_links_read_unlock() Add the missing __releases(&device_links_srcu) annotation Signed-off-by: Jules Irenge <jbi.octave@gmail.com> Link: https://lore.kernel.org/r/20200214204741.94112-20-jbi.octave@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04driver core: Rename deferred_probe_timeout and make it globalJohn Stultz
Since other subsystems (like regulator) have similar arbitrary timeouts for how long they try to resolve driver dependencies, rename deferred_probe_timeout to driver_deferred_probe_timeout and set it as global, so it can be shared. Cc: linux-pm@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Mark Brown <broonie@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Saravana Kannan <saravanak@google.com> Cc: Todd Kjos <tkjos@google.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Kevin Hilman <khilman@kernel.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Rob Herring <robh@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Link: https://lore.kernel.org/r/20200225050828.56458-6-john.stultz@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04driver core: Remove driver_deferred_probe_check_state_continue()John Stultz
Now that driver_deferred_probe_check_state() works better, and we've converted the only user of driver_deferred_probe_check_state_continue() we can simply remove it and simplify some of the logic. Cc: linux-pm@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Mark Brown <broonie@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Saravana Kannan <saravanak@google.com> Cc: Todd Kjos <tkjos@google.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Kevin Hilman <khilman@kernel.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Rob Herring <robh@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Link: https://lore.kernel.org/r/20200225050828.56458-5-john.stultz@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04driver core: Set deferred_probe_timeout to a longer default if ↵John Stultz
CONFIG_MODULES is set When using modules, its common for the modules not to be loaded until quite late by userland. With the current code, driver_deferred_probe_check_state() will stop returning EPROBE_DEFER after late_initcall, which can cause module dependency resolution to fail after that. So allow a longer window of 30 seconds (picked somewhat arbitrarily, but influenced by the similar regulator core timeout value) in the case where modules are enabled. Cc: linux-pm@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Mark Brown <broonie@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Saravana Kannan <saravanak@google.com> Cc: Todd Kjos <tkjos@google.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Kevin Hilman <khilman@kernel.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Rob Herring <robh@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Link: https://lore.kernel.org/r/20200225050828.56458-3-john.stultz@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04driver core: Fix driver_deferred_probe_check_state() logicJohn Stultz
driver_deferred_probe_check_state() has some uninituitive behavior. * From boot to late_initcall, it returns -EPROBE_DEFER * From late_initcall to the deferred_probe_timeout (if set) it returns -ENODEV * If the deferred_probe_timeout it set, after it fires, it returns -ETIMEDOUT This is a bit confusing, as its useful to have the function return -EPROBE_DEFER while the timeout is still running. This behavior has resulted in the somwhat duplicative driver_deferred_probe_check_state_continue() function being added. Thus this patch tries to improve the logic, so that it behaves as such: * If late_initcall has passed, and modules are not enabled it returns -ENODEV * If modules are enabled and deferred_probe_timeout is set, it returns -EPROBE_DEFER until the timeout, afterwhich it returns -ETIMEDOUT. * In all other cases, it returns -EPROBE_DEFER This will make the deferred_probe_timeout value much more functional, and will allow us to consolidate the driver_deferred_probe_check_state() and driver_deferred_probe_check_state_continue() logic in a later patch. Cc: linux-pm@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Mark Brown <broonie@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Saravana Kannan <saravanak@google.com> Cc: Todd Kjos <tkjos@google.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Kevin Hilman <khilman@kernel.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Rob Herring <robh@kernel.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Link: https://lore.kernel.org/r/20200225050828.56458-2-john.stultz@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04driver core: Add fw_devlink kernel commandline optionSaravana Kannan
fwnode_operations.add_links allows creating device links from information provided by firmware. fwnode_operations.add_links is currently implemented only by OF/devicetree code and a specific case of efi. However, there's nothing preventing ACPI or other firmware types from implementing it. The OF implementation is currently controlled by a kernel commandline parameter called of_devlink. Since this feature is generic isn't limited to OF, add a generic fw_devlink kernel commandline parameter to control this feature across firmware types. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20200222014038.180923-3-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04driver core: Reevaluate dev->links.need_for_probe as suppliers are addedSaravana Kannan
A previous patch 03324507e66c ("driver core: Allow fwnode_operations.add_links to differentiate errors") forgot to update all call sites to fwnode_operations.add_links. This patch fixes that. Legend: -> Denotes RHS is an optional/potential supplier for LHS => Denotes RHS is a mandatory supplier for LHS Example: Device A => Device X Device A -> Device Y Before this patch: 1. Device A is added. 2. Device A is marked as waiting for mandatory suppliers 3. Device X is added 4. Device A is left marked as waiting for mandatory suppliers Step 4 is wrong since all mandatory suppliers of Device A have been added. After this patch: 1. Device A is added. 2. Device A is marked as waiting for mandatory suppliers 3. Device X is added 4. Device A is no longer considered as waiting for mandatory suppliers This is the correct behavior. Fixes: 03324507e66c ("driver core: Allow fwnode_operations.add_links to differentiate errors") Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20200222014038.180923-2-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04driver core: Skip unnecessary work when device doesn't have sync_state()Saravana Kannan
A bunch of busy work is done for devices that don't have sync_state() support. Stop doing the busy work. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20200221080510.197337-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04driver core: Call sync_state() even if supplier has no consumersSaravana Kannan
The initial patch that added sync_state() support didn't handle the case where a supplier has no consumers. This was because when a device is successfully bound with a driver, only its suppliers were checked to see if they are eligible to get a sync_state(). This is not sufficient for devices that have no consumers but still need to do device state clean up. So fix this. Fixes: fc5a251d0fd7ca90 (driver core: Add sync_state driver/bus callback) Signed-off-by: Saravana Kannan <saravanak@google.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200221080510.197337-2-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04device property: Export fwnode_get_name()Heikki Krogerus
This makes it possible to take advantage of the function in the device drivers. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20200302135353.56659-8-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04PM: sleep: wakeup: Use built-in RCU list checkingMadhuparna Bhowmik
Pass cond argument to list_for_each_entry_rcu() to fix the following false positive lockdep warning and other uses of list_for_each_entry_rcu() in wakeup.c. (CONFIG_PROVE_RCU_LIST = y) [ 331.934648] ============================= [ 331.934650] WARNING: suspicious RCU usage [ 331.934653] 5.6.0-rc1+ #5 Not tainted [ 331.934655] ----------------------------- [ 331.934657] drivers/base/power/wakeup.c:408 RCU-list traversed in non-reader section!! [ 333.025156] ============================= [ 333.025161] WARNING: suspicious RCU usage [ 333.025168] 5.6.0-rc1+ #5 Not tainted [ 333.025173] ----------------------------- [ 333.025180] drivers/base/power/wakeup.c:424 RCU-list traversed in non-reader section!! Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-04PM: sleep: core: Use built-in RCU list checkingMadhuparna Bhowmik
This patch passes the cond argument to list_for_each_entry_rcu() to fix the following false-positive lockdep warnings: (with CONFIG_PROVE_RCU_LIST = y) [ 330.302784] ============================= [ 330.302789] WARNING: suspicious RCU usage [ 330.302796] 5.6.0-rc1+ #5 Not tainted [ 330.302801] ----------------------------- [ 330.302808] drivers/base/power/main.c:326 RCU-list traversed in non-reader section!! [ 330.303303] ============================= [ 330.303307] WARNING: suspicious RCU usage [ 330.303311] 5.6.0-rc1+ #5 Not tainted [ 330.303315] ----------------------------- [ 330.303319] drivers/base/power/main.c:1698 RCU-list traversed in non-reader section!! [ 331.934969] ============================= [ 331.934971] WARNING: suspicious RCU usage [ 331.934973] 5.6.0-rc1+ #5 Not tainted [ 331.934975] ----------------------------- [ 331.934977] drivers/base/power/main.c:1238 RCU-list traversed in non-reader section!! [ 332.467772] WARNING: suspicious RCU usage [ 332.467775] 5.6.0-rc1+ #5 Not tainted [ 332.467775] ----------------------------- [ 332.467778] drivers/base/power/main.c:269 RCU-list traversed in non-reader section!! Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-04PM: runtime: Add pm_runtime_get_if_active()Sakari Ailus
pm_runtime_get_if_in_use() bumps up the PM-runtime usage count if it is not equal to zero and the device's PM-runtime status is 'active'. This works for drivers that do not use autoidle, but for those that do, the function returns zero even when the device is active. In order to maintain sane device state while the device is powered on in the hope that it'll be needed, pm_runtime_get_if_active(dev, true) returns a positive value if the device's PM-runtime status is 'active' when it is called, in which case it also increments the device's usage count. If the second argument of pm_runtime_get_if_active() is 'false', the function behaves just like pm_runtime_get_if_in_use(), so redefine the latter as a wrapper around the former. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-02-26drivers/base/power: add dpm_sysfs_change_owner()Christian Brauner
Add a helper to change the owner of a device's power entries. This needs to happen when the ownership of a device is changed, e.g. when moving network devices between network namespaces. This function will be used to correctly account for ownership changes, e.g. when moving network devices between network namespaces. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26device: add device_change_owner()Christian Brauner
Add a helper to change the owner of a device's sysfs entries. This needs to happen when the ownership of a device is changed, e.g. when moving network devices between network namespaces. This function will be used to correctly account for ownership changes, e.g. when moving network devices between network namespaces. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-10firmware_loader: load files from the mount namespace of initTopi Miettinen
I have an experimental setup where almost every possible system service (even early startup ones) runs in separate namespace, using a dedicated, minimal file system. In process of minimizing the contents of the file systems with regards to modules and firmware files, I noticed that in my system, the firmware files are loaded from three different mount namespaces, those of systemd-udevd, init and systemd-networkd. The logic of the source namespace is not very clear, it seems to depend on the driver, but the namespace of the current process is used. So, this patch tries to make things a bit clearer and changes the loading of firmware files only from the mount namespace of init. This may also improve security, though I think that using firmware files as attack vector could be too impractical anyway. Later, it might make sense to make the mount namespace configurable, for example with a new file in /proc/sys/kernel/firmware_config/. That would allow a dedicated file system only for firmware files and those need not be present anywhere else. This configurability would make more sense if made also for kernel modules and /sbin/modprobe. Modules are already loaded from init namespace (usermodehelper uses kthreadd namespace) except when directly loaded by systemd-udevd. Instead of using the mount namespace of the current process to load firmware files, use the mount namespace of init process. Link: https://lore.kernel.org/lkml/bb46ebae-4746-90d9-ec5b-fce4c9328c86@gmail.com/ Link: https://lore.kernel.org/lkml/0e3f7653-c59d-9341-9db2-c88f5b988c68@gmail.com/ Signed-off-by: Topi Miettinen <toiwoton@gmail.com> Link: https://lore.kernel.org/r/20200123125839.37168-1-toiwoton@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-08Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ...
generated by cgit (git 2.34.1) at 2025-09-12 02:28:08 +0000