summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm
AgeCommit message (Collapse)Author
2024-09-02drm/amd/display: Determine IPS mode by ASIC and PMFW versionsLeo Li
[Why] DCN IPS interoperates with other system idle power features, such as Zstates. On DCN35, there is a known issue where system Z8 + DCN IPS2 causes a hard hang. We observe this on systems where the SBIOS allows Z8. Though there is a SBIOS fix, there's no guarantee that users will get it any time soon, or even install it. A workaround is needed to prevent this from rearing its head in the wild. [How] For DCN35, check the pmfw version to determine whether the SBIOS has the fix. If not, set IPS1+RCG as the deepest possible state in all cases except for s0ix and display off (DPMS). Otherwise, enable all IPS Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 28d43d0895896f84c038d906d244e0a95eb243ec) Cc: stable@vger.kernel.org
2024-09-02drm/amdgpu/gfx10: use rlc safe mode for soft recoveryAlex Deucher
Protect the MMIO access with safe mode. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx11: use rlc safe mode for soft recoveryAlex Deucher
Protect the MMIO access with safe mode. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx12: use rlc safe mode for soft recoveryAlex Deucher
Protect the MMIO access with safe mode. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx12: use proper rlc safe mode helpersAlex Deucher
Rather than open coding it for the queue reset. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx11: use proper rlc safe mode helpersAlex Deucher
Rather than open coding it for the queue reset. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx10: use proper rlc safe mode helpersAlex Deucher
Rather than open coding it for the queue reset. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx12: per queue reset only on bare metalAlex Deucher
It's not supported under SR-IOV at the moment. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx11: per queue reset only on bare metalAlex Deucher
It's not supported under SR-IOV at the moment. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx10: per queue reset only on bare metalAlex Deucher
It's not supported under SR-IOV at the moment. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/mes11: implement mmio queue reset for gfx11Jiadong Zhu
Implement queue reset for graphic and compute queue. v2: use amdgpu_gfx_rlc funcs to enter/exit safe mode. v3: use gfx_v11_0_request_gfx_index_mutex() v4: fix mutex handling Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/mes: implement amdgpu_mes_reset_hw_queue_mmioJiadong Zhu
The reset_queue api could be used from kfd or kgd. v2: add use_mmio parameter for mes_reset_legacy_queue. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/mes: modify mes api for mmio queue resetJiadong Zhu
Add me/pipe/queue parameters for queue reset input. v2: fix build (Alex) Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx12: fallback to driver reset compute queue directlyAlex Deucher
Since the MES FW resets kernel compute queue always failed, this may caused by the KIQ failed to process unmap KCQ. So, before MES FW work properly that will fallback to driver executes dequeue and resets SPI directly. Besides, rework the ring reset function and make the busy ring type reset in each function respectively. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx12: add ring reset callbacksAlex Deucher
Add ring reset callbacks for gfx and compute. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx10: rework reset sequenceAlex Deucher
To match other GFX IPs. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx10: wait for reset done before remapJiadong Zhu
There is a racing condition that cp firmware modifies MQD in reset sequence after driver updates it for remapping. We have to wait till CP_HQD_ACTIVE becoming false then remap the queue. v2: fix KIQ locking (Alex) v3: fix KIQ locking harder (Jessie) Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx10: remap queue after reset successfullyJiadong Zhu
Kiq command unmap_queues only does the dequeueing action. We have to map the queue back with clean mqd. v2: fix up error handling (Alex) Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx10: add ring reset callbacksAlex Deucher
Add ring reset callbacks for gfx and compute. v2: fix gfx handling v3: wait for KIQ to complete Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx11: wait for reset done before remapJiadong Zhu
There is a racing condition that cp firmware modifies MQD in reset sequence after driver updates it for remapping. We have to wait till CP_HQD_ACTIVE becoming false then remap the queue. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx11: rename gfx_v11_0_gfx_init_queue()Alex Deucher
Rename to gfx_v11_0_kgq_init_queue() to better align with the other naming in the file. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx11: fallback to driver reset compute queue directly (v2)Prike Liang
Since the MES FW resets kernel compute queue always failed, this may caused by the KIQ failed to process unmap KCQ. So, before MES FW work properly that will fallback to driver executes dequeue and resets SPI directly. Besides, rework the ring reset function and make the busy ring type reset in each function respectively. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: 3.2.299Aric Cyr
This version brings along the following: - DCN35 fixes - DML2 fixes - IPS fixes - ODM fixes - Miscellaneous cleanups - MST fixes - SPL fixes Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Fix flickering caused by dccgHansen Dsouza
Always allow un-gating. Follow legacy workaround for repeated dppclk dto updates Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Block timing sync for different signals in PMODillon Varone
PMO assumes that like timings can be synchronized, but DC only allows this if the signal types match. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: fix graphics hang in multi-display mst caseGabe Teeger
[what] Graphics hang observed with 3 displays connected to DP2.0 mst dock. [why] There's a mismatch in dml and dc between the assignments of hpo link encoders. [how] Add a new array in dml that tracks the current mapping of HPO stream encoders to HPO link encoders in dc. Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Add sharpness control interfaceRelja Vojvodic
- Add interface for controlling shapness level input into DCN. - Update SPL to support custom sharpness values. - Add support for different sharpness values depending on YUV/RGB content. Reviewed-by: Samson Tam <samson.tam@amd.com> Signed-off-by: Relja Vojvodic <Relja.Vojvodic@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02Revert "drm/amd/display: Wait for all pending cleared before full update"Dillon Varone
This reverts commit f0b7dcf25834afd17df316367dfe5d4c890c713c. It is causing graphics hangs. Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: disable sharpness if HDR Multiplier is too largeSamson Tam
[Why] Certain profiles have higher HDR multiplier than SDR boost max which is not currently supported [How] Disable sharpness for these profiles Fixes: 1b0ce903fe74 ("drm/amd/display: add improvements for text display and HDR DWM and MPO") Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Add dpia debug option to control power managementMeenakshikumar Somasundaram
[Why] To provide option to dpia control power management [How] By adding disable_usb4_pm_support bit field in dpia_debug option to control dpia power management Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx11: add ring reset callbacksAlex Deucher
Add ring reset callbacks for gfx and compute. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: re-enable Dynamic ODM policySamson Tam
[Why] Previous disable ODM policy due to underflow issue with sharpener. Issue is resolved after updating sharpening policy to apply to both windowed and fullscreen video [How] Remove sharpness check disabling Dynamic ODM policy Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Lock DC and exit IPS when changing backlightLeo Li
Backlight updates require aux and/or register access. Therefore, driver needs to disallow IPS beforehand. So, acquire the dc lock before calling into dc to update backlight - we should be doing this regardless of IPS. Then, while the lock is held, disallow IPS before calling into dc, then allow IPS afterwards (if it was previously allowed). Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: only trigger BIOS related assert for older ASICsDaniel Sa
[Why] Some asserts are always hit on startup/Pnp when they should only be used to indicate when something has gone wrong. [How] Ignore result of getting function from bios cmd table for newer asics. Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Daniel Sa <Daniel.Sa@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Fix DCN35 set min dispclk logicNicholas Susanto
[Why] Setting min dispclk to 50Mhz outside clock lowering function causes unnecessary calls to SMU to lower dispclk and causes dentist hangs when there is no stream on the pipes. [How] Move the set minimum dispclk logic inside the lowering dispclk if statement. Fixes: 234441320552 ("DCN35 set min dispclk to 50Mhz") Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx9.4.3: Implement compute pipe resetPrike Liang
Implement the compute pipe reset, and the driver will fallback to pipe reset when queue reset fails. The pipe reset only deactivates the queue which is scheduled in the pipe, and meanwhile the MEC pipe will be reset to the firmware _start pointer. So, it seems pipe reset will cost more cycles than the queue reset; therefore, the driver tries to recover by doing queue reset first. Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/xe/display: remove unused compat kdev_to_i915() and pdev_to_i915()Jani Nikula
The display code no longer uses kdev_to_i915() or pdev_to_i915() helpers. Remove them. Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/05b948f9012fc7c0b97d567c70b0bac8791d554a.1724942754.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-09-02drm/i915/hdcp: migrate away from kdev_to_i915() in GSC messagingJani Nikula
Use to_intel_display() instead of kdev_to_i915() in the HDCP component API hooks. Avoid further drive-by changes at this point, and just convert the display pointer to i915, and leave the struct intel_display conversion for later. The NULL error checking in the hooks make this a bit cumbersome. I'm not actually sure they're really required, but don't go down that rabbit hole just now. Cc: Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/efd5c4c164c01b7ee50ad43f202b074b373fb810.1724942754.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-09-02drm/xe: Fix merge fails related to display runtime PMMaarten Lankhorst
The most recent merge commits introduced some fails to drm/drm-next, I've noticed these when looking at the xe patches. Solve it! Fixes: 8bdb468dd7a5 ("Merge tag 'drm-xe-next-2024-08-28' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next") Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> [sima: add fixes line, and drop 3rd hunk because that's just a bugfix, not mismerge, which should go in seperately with proper fixes line and review/testing.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240902112002.489225-1-maarten.lankhorst@linux.intel.com
2024-09-02drm/i915/hdcp: migrate away from kdev_to_i915() in bind/unbindJani Nikula
Use to_intel_display() instead of kdev_to_i915() in the HDCP component API hooks. Avoid further drive-by changes at this point, and just convert the display pointer to i915, and leave the struct intel_display conversion for later. Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0beedaa438e912828b48d9980f017807e079d7ab.1724942754.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-09-02drm/i915/audio: migrate away from kdev_to_i915()Jani Nikula
Use to_intel_display() instead of kdev_to_i915() in the audio component API hooks. Avoid further drive-by changes at this point, and just convert the display pointer to i915, and leave the struct intel_display conversion for later. Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/35ef00470db0088eb82b0406e4f7730154f54baf.1724942754.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-09-02drm/i915: support struct device and pci_dev in to_intel_display()Jani Nikula
Now that both xe and i915 store struct drm_device in drvdata, we can trivially support struct device and struct pci_dev in to_intel_display(). We do need to check for NULL drvdata before converting it into struct intel_device pointer, though. Do it in __drm_device_to_intel_display(). v2: Add NULL check in __drm_device_to_intel_display() (Gustavo) Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> # v1 Link: https://patchwork.freedesktop.org/patch/msgid/f025a3fa4422725c78baac4501ad3ecc9e5b40d5.1724942754.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-09-02drm/i915 & drm/xe: save struct drm_device to drvdataJani Nikula
In the future, the display code shall not have any idea about struct xe_device or struct drm_i915_private, but will need to get at the struct drm_device via drvdata. Store the struct drm_device pointer to drvdata instead of the driver specific pointer. Avoid passing NULL to container_of() via to_i915()/to_xe_device(). (It does return NULL for NULL pointers when the offset happens to be 0, but otherwise returns garbage pointers for NULL.) Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/946805b32e38d4785880cc7857e01e6a309126a9.1724942754.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-09-02drm/i915/fence: Mark debug_fence_free() with __maybe_unusedAndy Shevchenko
When debug_fence_free() is unused (CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS=n), it prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y: .../i915_sw_fence.c:118:20: error: unused function 'debug_fence_free' [-Werror,-Wunused-function] 118 | static inline void debug_fence_free(struct i915_sw_fence *fence) | ^~~~~~~~~~~~~~~~ Fix this by marking debug_fence_free() with __maybe_unused. See also commit 6863f5643dd7 ("kbuild: allow Clang to find unused static inline functions for W=1 build"). Fixes: fc1584059d6c ("drm/i915: Integrate i915_sw_fence with debugobjects") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240829155950.1141978-3-andriy.shevchenko@linux.intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 8be4dce5ea6f2368cc25edc71989c4690fa66964) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2024-09-02drm/i915/fence: Mark debug_fence_init_onstack() with __maybe_unusedAndy Shevchenko
When debug_fence_init_onstack() is unused (CONFIG_DRM_I915_SELFTEST=n), it prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y: .../i915_sw_fence.c:97:20: error: unused function 'debug_fence_init_onstack' [-Werror,-Wunused-function] 97 | static inline void debug_fence_init_onstack(struct i915_sw_fence *fence) | ^~~~~~~~~~~~~~~~~~~~~~~~ Fix this by marking debug_fence_init_onstack() with __maybe_unused. See also commit 6863f5643dd7 ("kbuild: allow Clang to find unused static inline functions for W=1 build"). Fixes: 214707fc2ce0 ("drm/i915/selftests: Wrap a timer into a i915_sw_fence") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240829155950.1141978-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 5bf472058ffb43baf6a4cdfe1d7f58c4c194c688) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2024-09-02drm/i915: Fix readout degamma_lut mismatch on ilk/snbVille Syrjälä
On ilk/snb the pipe may be configured to place the LUT before or after the CSC depending on various factors, but as there is only one LUT (no split mode like on IVB+) we only advertise a gamma_lut and no degamma_lut in the uapi to avoid confusing userspace. This can cause a problem during readout if the VBIOS/GOP enabled the LUT in the pre CSC configuration. The current code blindly assigns the results of the readout to the degamma_lut, which will cause a failure during the next atomic_check() as we aren't expecting anything to be in degamma_lut since it's not visible to userspace. Fix the problem by assigning whatever LUT we read out from the hardware into gamma_lut. Cc: stable@vger.kernel.org Fixes: d2559299d339 ("drm/i915: Make ilk_read_luts() capable of degamma readout") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11608 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240710124137.16773-1-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com> (cherry picked from commit 33eca84db6e31091cef63584158ab64704f78462) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2024-09-02drm/i915: Do not attempt to load the GSC multiple timesDaniele Ceraolo Spurio
If the GSC FW fails to load the GSC HW hangs permanently; the only ways to recover it are FLR or D3cold entry, with the former only being supported on driver unload and the latter only on DGFX, for which we don't need to load the GSC. Therefore, if GSC fails to load there is no need to try again because the HW is stuck in the error state and the submission to load the FW would just hang the GSCCS. Note that, due to wa_14015076503, on MTL the GuC escalates all GSCCS hangs to full GT resets, which would trigger a new attempt to load the GSC FW in the post-reset HW re-init; this issue is also fixed by not attempting to load the GSC FW after an error. Fixes: 15bd4a67e914 ("drm/i915/gsc: GSC firmware loading") Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: <stable@vger.kernel.org> # v6.3+ Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240820215952.2290807-1-daniele.ceraolospurio@intel.com (cherry picked from commit 03ded4d432a1fb7bb6c44c5856d14115f6f6c3b9) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2024-09-02drm/imagination: Free pvr_vm_gpuva after unlinkMatt Coster
This caused a measurable memory leak. Although the individual allocations are small, the leaks occurs in a high-usage codepath (remapping or unmapping device memory) so they add up quickly. Fixes: ff5f643de0bf ("drm/imagination: Add GEM and VM related code") Cc: stable@vger.kernel.org Reviewed-by: Frank Binns <frank.binns@imgtec.com> Link: https://patchwork.freedesktop.org/patch/msgid/35867394-d8ce-4698-a8fd-919a018f1583@imgtec.com Signed-off-by: Matt Coster <matt.coster@imgtec.com>
2024-09-02drm/i915/fence: Mark debug_fence_free() with __maybe_unusedAndy Shevchenko
When debug_fence_free() is unused (CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS=n), it prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y: .../i915_sw_fence.c:118:20: error: unused function 'debug_fence_free' [-Werror,-Wunused-function] 118 | static inline void debug_fence_free(struct i915_sw_fence *fence) | ^~~~~~~~~~~~~~~~ Fix this by marking debug_fence_free() with __maybe_unused. See also commit 6863f5643dd7 ("kbuild: allow Clang to find unused static inline functions for W=1 build"). Fixes: fc1584059d6c ("drm/i915: Integrate i915_sw_fence with debugobjects") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240829155950.1141978-3-andriy.shevchenko@linux.intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-09-02drm/i915/fence: Mark debug_fence_init_onstack() with __maybe_unusedAndy Shevchenko
When debug_fence_init_onstack() is unused (CONFIG_DRM_I915_SELFTEST=n), it prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y: .../i915_sw_fence.c:97:20: error: unused function 'debug_fence_init_onstack' [-Werror,-Wunused-function] 97 | static inline void debug_fence_init_onstack(struct i915_sw_fence *fence) | ^~~~~~~~~~~~~~~~~~~~~~~~ Fix this by marking debug_fence_init_onstack() with __maybe_unused. See also commit 6863f5643dd7 ("kbuild: allow Clang to find unused static inline functions for W=1 build"). Fixes: 214707fc2ce0 ("drm/i915/selftests: Wrap a timer into a i915_sw_fence") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240829155950.1141978-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
generated by cgit (git 2.34.1) at 2025-09-18 23:19:01 +0000