summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2018-07-30drm/armada: convert primary plane to atomic stateRussell King
Convert the primary plane as a whole to use its atomic state and the transitional helpers. The CRTC is also switched to use the transitional helpers for mode_set() and mode_set_base(). Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-07-30drm/armada: reset all atomic state during driver initialisationRussell King
Reset the atomic state of any converted components during driver initialisation to ensure that we have the atomic state initialised for any component converted to atomic modeset. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-07-30drm/armada: merge armada_drm_gra_plane_regs() into only callerRussell King
armada_drm_gra_plane_regs() is now only ever called from within armada_drm_primary_update_state(), so merge it into this function. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-07-30drm/armada: use core of primary update_plane for mode setRussell King
Use the core of the update_plane method to configure the primary plane within mode_set() rather than duplicating this code. This moves us closer to the same code structure that the atomic modeset transitional helpers will use. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-07-30drm/armada: move mode set vblank handling and disable/enableRussell King
Move the mode set vblank handling and controller enable/disable to the prepare() and commit() callbacks. This will be needed when we move to mode_set_nofb() as we should not enable the controller without the plane coordinates and location having been properly updated. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-07-30drm/armada: add rectangle helpersRussell King
Add helpers to convert rectangle width/height and x/y to register values. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-07-30drm/armada: clean up armada_drm_crtc_page_flip()Russell King
drm_mode_page_flip_ioctl() already takes care of checking the framebuffer format, and also assigns primary->fb after a successful call to this handler. These are both redundant, and can be removed. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-07-30drm/armada: Adding new typedef vm_fault_tSouptick Joarder
Use new return type vm_fault_t for fault handler in struct vm_operations_struct. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. commit 1c8f422059ae ("mm: change return type to vm_fault_t") Previously vm_insert_pfn() returns err which driver mapped into VM_FAULT_* type. The new function vmf_insert_pfn() will replace this inefficiency by returning VM_FAULT_* type. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-07-30drm/armada: Replace drm_dev_unref with drm_dev_putThomas Zimmermann
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-07-30BackMerge v4.18-rc7 into drm-nextDave Airlie
rmk requested this for armada and I think we've had a few conflicts build up. Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-07-28drm/vkms: Fix connector leak at the module removalRodrigo Siqueira
Currently, vkms shows an error message if the following steps occur: (1) load vkms, (2) perform any specific operation in the vkms (e.g., run an IGT test), and (3) unload the module. The following error message emerges: [drm:drm_mode_config_cleanup [drm]] *ERROR* connector Virtual-1 leaked! This commit fixes this error by calling drm_atomic_helper_shutdown() before drm_mode_config_cleanup, which turns off the whole display pipeline and remove a reference related to any connector. Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180719004045.hzepp565x5lfco3c@smtp.gmail.com
2018-07-28drm_dp_cec.c: fix formatting typo: %pdH -> %phDHans Verkuil
This caused a kernel oops since %pdH interpreted the pointer as a struct file. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/f3720ddf-ec0f-cd22-46b6-720a5e2098f2@xs4all.nl
2018-07-27drm/amdgpu: clean up the superfluous space and align the comment text for ↵Huang Rui
amdgpu_ttm This patch cleans up spaces and align the text to refine the comment for amdgpu_ttm. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27drm/amdgpu: correct evict flag for bo moveJunwei Zhang
pass the evict flag instead of hard code Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27drm/ttm: Merge hugepage attr changes in ttm_dma_page_put. (v2)Bas Nieuwenhuizen
Every set_pages_array_wb call resulted in cross-core interrupts and TLB flushes. Merge more of them for less overhead. This reduces the time needed to free a 1.6 GiB GTT WC buffer as part of Vulkan CTS from ~2 sec to < 0.25 sec. (Allocation still takes more than 2 sec though) (v2): use set_pages_wb instead of set_memory_wb. Signed-off-by: Bas Nieuwenhuizen <basni@chromium.org> Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27drm/ttm: clean up non-x86 definitions on ttm_page_allocHuang Rui
All non-x86 definitions are moved to ttm_set_memory header, so remove it from ttm_page_alloc.c. Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Bas Nieuwenhuizen <basni@chromium.org> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27drm/ttm: clean up non-x86 definitions on ttm_page_alloc_dmaHuang Rui
All non-x86 definitions are moved to ttm_set_memory header, so remove it from ttm_page_alloc_dma.c. Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Bas Nieuwenhuizen <basni@chromium.org> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27drm/amdgpu: implement harvesting support for UVD 7.2 (v3)Alex Deucher
Properly handle cases where one or more instance of the IP block may be harvested. v2: make sure ip_num_rings is initialized amdgpu_queue_mgr.c v3: rebase on Christian's UVD changes, drop unused var Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27drm/amd: Add missing fields in atom_integrated_system_info_v1_11Harry Wentland
This structure needs to align with structure in atomfirmware table. Update it. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27drm/amd/display: DC 3.1.59Harry Wentland
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27drm/amd/display: Prevent PSR from being enabled if initialization failsAnthony Koo
[Why] PSR_SET command is sent to the microcontroller in order to initialize parameters needed for PSR feature, such as telling the microcontroller which pipe is driving the PSR supported panel. When this command is skipped or fails, the microcontroller may program the wrong thing if driver tries to enable PSR. [How] If PSR_SET fails, do not set psr_enable flag to indicate the feature is not yet initialized. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27drm/amd/display: Fix Vega10 black screen after mode changeJerry (Fangzhi) Zuo
[Why] The sequence is slightly changed when bring .set_bandwidth out from the end of programming backend to the end of programming surface. Vega10 doesn't like to get clocks updated if stream_count is zero in the current context (Atomic Reset). [How] Do not update clocks if no stream is showing up in the context. Fixes 1b2b130192 "dc: Remove 300Mhz minimum disp clk limit." Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27drm/amd/display: flatten aux_engine and engineBhawanpreet Lakha
[Why] engine and aux_engine are unnecessary layers we want to remove this layer. [How] flatten engine and aux engine structs into one struct called aux_engine and remove all references to the engine struct. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27drm/amd/display: Retry link training againBhawanpreet Lakha
[Why] Some receivers seem to fail the first link training but are good on subsequent tries. We want to retry link training again. This fixes HTC vive pro not lighting up after being disabled. [How] Check if the link training passed without fall back if this is not the case then we retry link training. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27drm/amdgpu: patch the IBs for the second UVD instance v2Christian König
Patch the IBs for the second UVD instance so that userspace don't need to care about the instance they submit to. v2: use direct IB patching Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-and-tested-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27drm/amdgpu: add support for inplace IB patching for MM engines v2Christian König
We are going to need that for the second UVD instance on Vega20. v2: rename to patch_cs_in_place Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-and-tested-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27Merge branches 'ib-mfd-4.19', 'ib-mfd-gpio-pinctrl-4.19', ↵Lee Jones
'ib-mfd-i915-media-platform-4.19' and 'ib-mfd-regulator-4.19', tag 'ib-platform-chrome-mfd-move-cros-ec-transport-for-4.19' into ibs-for-mfd-merged Immutable branch (mfd, chrome) due for the v4.19 window Immutable Branch which moves the cros_ec_i2c and cros_ec_spi transport drivers from mfd to platform/chrome. Changes in arm are a simple rename in defconfigs. Change in input is a rename in help text.
2018-07-27Merge branch 'drm-next-4.19' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next Updates for 4.19. Mostly bug fixes and cleanups. Highlights: - Internal API cleanup in GPU scheduler - Decouple i2c and aux abstractions in DC - Update maintainers - Misc cleanups - Misc bug fixes Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180725215326.2709-1-alexander.deucher@amd.com
2018-07-27Merge tag 'exynos-drm-next-for-v4.19' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Cleanups - Change g2d driver to component based driver . g2d driver was last customed sub driver so this patch series changes it to component based driver, which also makes gem handling to be more simplify. - Cleanup of Exynos DRM suspend/resume . Register exynos drm core suspend/resume functions to prepare/complete callbacks of dev_pm_ops instead of suspend/resume callbacks to ensure exynos_drm_suspend() is called before any suspend callback from the real devices to avoid some issues on boards with complex pipelines. . Also Add pm_runtime_furce_suspend/resume as SYSTEM_SLEEP_PM_OPS to ensure that resources of each devices will be released for the system PM suspend/resume cycle. - Remove local value not used. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1532505748-10025-1-git-send-email-inki.dae@samsung.com
2018-07-27Merge branch 'for-upstream/malidp-fixes' of git://linux-arm.org/linux-ld ↵Dave Airlie
into drm-next I have a couple of small patches for malidp to be applied in drm-next. They have arisen from the decision to switch the writeback connectors to always connected. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180723145302.GA28052@e110455-lin.cambridge.arm.com
2018-07-27Merge tag 'imx-drm-next-2018-07-20' of ↵Dave Airlie
git://git.pengutronix.de/git/pza/linux into drm-next drm/imx: cleanup and csi improvements - Remove the unused struct imx_drm_crtc and the unused pipes field from imx_drm_device and replace drm_dev_unref with drm_dev_put. - Extend CSI configuration to support RGB888 and BGR888 capture, as well as 16-bit RGB565 capture via a parallel bus. - Add CPMEM support for negative interlace offsets, which is necessary to support writing captured bottom-top interlaced fields to memory with interleaved lines. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1532100583.3438.9.camel@pengutronix.de
2018-07-27Merge tag 'imx-drm-fixes-2018-07-20' of ↵Dave Airlie
git://git.pengutronix.de/git/pza/linux into drm-fixes drm/imx: imx-drm ldb and ipu-v3 csi fixes - Disable the LVDS Display Bridge (LDB) on driver bind. This is necessary to guarantee correct LVDS signals in case the bootloader left the LVDS output active. - Remove false positive warning about disabled second LVDS channel in dual-channel mode. In this mode, the second LVDS channel can not be used separately. If the second channel is correctly described as disabled in the device tree, the driver warned about this anyway. - Fix the CSI confiuration to not only enable interlaced capture mode for V4L2_FIELD_SEQ_BT and V4L2_FIELD_SEQ_TB, but also for the V4L2_FIELD_ALTERNATE interlacing mode. Before, it incorrectly tried to capture progressive frames in that case. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1532100423.3438.8.camel@pengutronix.de
2018-07-26drm/msm: rework vblank event handling in dpu_crtcRajesh Yadav
The vblank on/off calls were missing in dpu_crtc leading to "driver forgot to call drm_crtc_vblank_off()" warning while entering suspend state. Also handle the state update completion event for a crtc being disabled in current atomic commit. This patch depends on https://www.spinics.net/lists/dri-devel/msg182402.html Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26drm/msm: Add SDM845 DPU supportJeykumar Sankaran
SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26drm/msm: Add pm_suspend/resume callbacks to msm_kmsJeykumar Sankaran
Used by the dpu driver for custom suspend/resume. Changes in v3: - None Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> [seanpaul split this out of the megapatch] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26drm/msm: Add .commit() callback to msm_kms functionsJeykumar Sankaran
Called right before wait_for_commit_done() to perform kickoff for active crtcs. Changes in v3: - None Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> [seanpaul split this out of the megapatch] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26drm/msm: #define MAX_<OBJECT> in msm_drv.hJeykumar Sankaran
dpu uses these elsewhere in the driver (in addition to increasing MAX_PLANES, that'll come later), so pull them out into #define. Changes in v3: - None Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> [seanpaul pulled this out of the dpu megapatch] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26drm/msm: Use labels for unwinding in the error pathJeykumar Sankaran
This simplifies cleanup, to make sure nothing drops out in case of error. Changes in v3: - None Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> [seanpaul split out of dpu megapatch and renamed labels] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26drm/msm: #define MDP version numbersJeykumar Sankaran
Useful for incoming DPU support Changes in v3: - None Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> [seanpaul split this from the dpu megapatch] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26drm/msm: Clean up dangling atomic_wqSean Paul
I missed this during the atomic conversion Changes in v3: - None Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26drm/msm: higher values of pclk can exceed 32 bits when multiplied by a factorAbhinav Kumar
Make the pclk_rate u64 to accommodate higher pixel clock rates. Changes in v3: - Converted pclk_rate to u32 (Archit) - Rebase on dsi cleanup set in msm-next Cc: Sibi Sankar <sibis@codeaurora.org> Cc: Archit Taneja <architt@codeaurora.org> Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26drm/msm: enable zpos normalizationJeykumar Sankaran
Enable drm core zpos normalization for planes. Changes in v3: - None Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26drm/msm/mdp5: subclass msm_mdss for mdp5Rajesh Yadav
SoCs having mdp5 or dpu have identical tree like device hierarchy where MDSS top level wrapper manages common power resources for all child devices. Subclass msm_mdss so that msm_mdss includes common defines and mdp5/dpu mdss derivations to include any extensions. Add mdss helper interface (msm_mdss_funcs) to msm_mdss base for mdp5/dpu mdss specific implementation calls. This change subclasses msm_mdss for mdp5, dpu specific changes will be done separately. Changes in v3: - Added Archit's R-b Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> [seanpaul rebased on msm-next and resolved conflicts] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26drm/msm: Move wait_for_vblanks into mdp complete_commit() hooksSean Paul
DPU doesn't use this, so push it into the mdp drivers. Changes in v3: - None Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26drm/msm/dsi: set encoder mode for DRM bridge explicitlyAbhinav Kumar
Currently, DRM bridge for DPU relies on the default video mode setting to set the encoder mode. Add an explicit call to set the encoder mode for bridges. Changes in v3: - None Reviewed-by: Archit Taneja <architt@codeauorora.org> Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26drm/msm/dsi: initialize postdiv_lock before use for 10nm pllRajesh Yadav
postdiv_lock spinlock was used before initialization for 10nm pll. It causes following spin_bug: "BUG: spinlock bad magic on CPU#0". Initialize spinlock before its usage. Changes in v3: - Added Archit's R-b Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26drm/msm/dsi: Use one connector for dual DSI modeChandan Uddaraju
Current DSI driver uses two connectors for dual DSI case even though we only have one panel. Fix this by implementing one connector/bridge for dual DSI use case. Use master DSI controllers to register one connector/bridge. Changes in v3: - None Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> [seanpaul removed unused local var causing a build warning] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26drm/msm/dsi: adjust dsi timing for dual dsi modeChandan Uddaraju
For dual dsi mode, the horizontal timing needs to be divided by half since both the dsi controllers will be driving this panel. Adjust the pixel clock and DSI timing accordingly. Changes in v3: - Added Archit's R-b - Rebase on dsi cleanup set in msm-next Cc: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-25drm/i915/glk: Add Quirk for GLK NUC HDMI port issues.Clint Taylor
On GLK NUC platforms the HDMI retiming buffer needs additional disabled time to correctly sync to a faster incoming signal. When measured on a scope the highspeed lines of the HDMI clock turn off for ~400uS during a normal resolution change. The HDMI retimer on the GLK NUC appears to require at least a full frame of quiet time before a new faster clock can be correctly sync'd. Wait 100ms due to msleep inaccuracies while waiting for a completed frame. Add a quirk to the driver for GLK boards that use ITE66317 HDMI retimers. V2: Add more devices to the quirk list V3: Delay increased to 100ms, check to confirm crtc type is HDMI. V4: crtc type check extended to include _DDI and whitespace fixes v5: Fix white spaces, remove the macro for delay. Revert the crtc type check introduced in v4. Cc: Imre Deak <imre.deak@intel.com> Cc: <stable@vger.kernel.org> # v4.14+ Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105887 Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> Tested-by: Daniel Scheller <d.scheller.oss@gmail.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180710200205.1478-1-radhakrishna.sripada@intel.com (cherry picked from commit 90c3e2198777aaa355b6994a31a79c636c8d4306) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-07-25gpu: drm: amdgpu: Replace mdelay with msleep in cik_pcie_gen3_enable()Jia-Ju Bai
cik_pcie_gen3_enable() is only called by cik_common_hw_init(), which is never called in atomic context. cik_pcie_gen3_enable() calls mdelay() to busily wait, which is not necessary. mdelay() can be replaced with msleep(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-15 12:25:12 +0000