summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2019-10-29Input: kxtj9 - switch to using managed resourcesDmitry Torokhov
Using devm API allows to clean up error handling and drop the remove() method. Link: https://lore.kernel.org/r/20191017204217.106453-22-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-29Input: bma150 - switch to using polled mode of input devicesDmitry Torokhov
We have added polled mode to the normal input devices with the intent of retiring input_polled_dev. This converts bma150 driver to use the polling mode of standard input devices and removes dependency on INPUT_POLLDEV. Link: https://lore.kernel.org/r/20191017204217.106453-21-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-29Input: bma150 - use managed resources helpersJonathan Bakker
The driver can be cleaned up by using managed resource helpers. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> [dtor: do not explicitly set parent of input device since we are using devm] Link: https://lore.kernel.org/r/20191017204217.106453-20-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-29Input: mma8450 - switch to using polled mode of input devicesDmitry Torokhov
We have added polled mode to the normal input devices with the intent of retiring input_polled_dev. This converts mma8450 driver to use the polling mode of standard input devices and removes dependency on INPUT_POLLDEV. Link: https://lore.kernel.org/r/20191017204217.106453-19-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-29Input: gpio_decoder - switch to using polled mode of input devicesDmitry Torokhov
We have added polled mode to the normal input devices with the intent of retiring input_polled_dev. This converts gpio_decoder driver to use the polling mode of standard input devices and removes dependency on INPUT_POLLDEV. Link: https://lore.kernel.org/r/20191017204217.106453-18-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-29Input: rb532_button - switch to using polled mode of input devicesDmitry Torokhov
We have added polled mode to the normal input devices with the intent of retiring input_polled_dev. This converts rb532_button driver to use the polling mode of standard input devices and removes dependency on INPUT_POLLDEV. Link: https://lore.kernel.org/r/20191017204217.106453-17-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-29Input: rb532_button - switch to using managed resourcesDmitry Torokhov
Using devm API allows us to clean up error handling paths and drop the remove() method. Link: https://lore.kernel.org/r/20191017204217.106453-16-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-29Input: sgi_btns - switch to using polled mode of input devicesDmitry Torokhov
We have added polled mode to the normal input devices with the intent of retiring input_polled_dev. This converts sgi_btns driver to use the polling mode of standard input devices and removes dependency on INPUT_POLLDEV. Link: https://lore.kernel.org/r/20191017204217.106453-15-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-29Input: sgi_btns - switch to using managed resourcesDmitry Torokhov
Switching to devm API allows to clean up error handling paths and drop the remove() method. Link: https://lore.kernel.org/r/20191017204217.106453-14-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-29Input: cobalt_btns - switch to using polled mode of input devicesDmitry Torokhov
We have added polled mode to the normal input devices with the intent of retiring input_polled_dev. This converts cobalt_btns driver to use the polling mode of standard input devices and removes dependency on INPUT_POLLDEV. Link: https://lore.kernel.org/r/20191017204217.106453-13-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-29Input: cobalt_btns - convert to use managed resourcesDmitry Torokhov
This simplifies error handling and allows to remove cobalt_buttons_remove() method. Link: https://lore.kernel.org/r/20191017204217.106453-12-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-29Input: wistron_btns - switch to using polled mode of input devicesDmitry Torokhov
We have added polled mode to the normal input devices with the intent of retiring input_polled_dev. This converts wistron_btns driver to use the polling mode of standard input devices and removes dependency on INPUT_POLLDEV. Link: https://lore.kernel.org/r/20191017204217.106453-11-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-29Input: apanel - switch to using polled mode of input devicesDmitry Torokhov
We have added polled mode to the normal input devices with the intent of retiring input_polled_dev. This converts apanel driver to use the polling mode of standard input devices and removes dependency on INPUT_POLLDEV. While at it, let's convert the driver to use devm. Link: https://lore.kernel.org/r/20191017204217.106453-10-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-29Input: gpio_keys_polled - switch to using polled mode of input devicesDmitry Torokhov
We have added polled mode to the normal input devices with the intent of retiring input_polled_dev. This converts gpio_keys_polled driver to use the polling mode of standard input devices and removes dependency on INPUT_POLLDEV. Note that we still keep polled and non-polled gpio-keys drivers separate, as they are different enough and mixing them up would make the code pretty confusing. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20191017204217.106453-9-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-29Input: jornada680_kbd - switch to using polled mode of input devicesDmitry Torokhov
We have added polled mode to the normal input devices with the intent of retiring input_polled_dev. This converts jornada680_kbd driver to use the polling mode of standard input devices and removes dependency on INPUT_POLLDEV. Acked-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20191017204217.106453-8-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-29Input: clps711x-keypad - switch to using polled mode of input devicesDmitry Torokhov
We have added polled mode to the normal input devices with the intent of retiring input_polled_dev. This converts clps711x-keypad driver to use the polling mode of standard input devices and removes dependency on INPUT_POLLDEV. Also use managed API when allocating input device, this allows us to remove clps711x_keypad_remove() method. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20191017204217.106453-7-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-29Input: adc-keys - switch to using polled mode of input devicesDmitry Torokhov
We have added polled mode to the normal input devices with the intent of retiring input_polled_dev. This converts adc-keys driver to use the polling mode of standard input devices and removes dependency on INPUT_POLLDEV. Acked-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20191017204217.106453-6-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-29Input: tsc6507x-ts - switch to using polled mode of input devicesDmitry Torokhov
We have added polled mode to the normal input devices with the intent of retiring input_polled_dev. This converts tsc6507x-ts driver to use the polling mode of standard input devices and removes dependency on INPUT_POLLDEV. Link: https://lore.kernel.org/r/20191017204217.106453-5-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-29Input: ts4800-ts - switch to using polled mode of input devicesDmitry Torokhov
We have added polled mode to the normal input devices with the intent of retiring input_polled_dev. This converts ts4800-ts driver to use the polling mode of standard input devices and removes dependency on INPUT_POLLDEV. Link: https://lore.kernel.org/r/20191017204217.106453-4-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-29Input: sur40 - switch to using polled mode of input devicesDmitry Torokhov
We have added polled mode to the normal input devices with the intent of retiring input_polled_dev. This converts sur40 driver to use the polling mode of standard input devices and removes dependency on INPUT_POLLDEV. Link: https://lore.kernel.org/r/20191017204217.106453-3-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-29Input: raspberrypi-ts - switch to using polled mode of input devicesDmitry Torokhov
We have added polled mode to the normal input devices with the intent of retiring input_polled_dev. This converts raspberrypi-ts driver to use the polling mode of standard input devices and removes dependency on INPUT_POLLDEV. Link: https://lore.kernel.org/r/20191017204217.106453-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-29Input: psxpad-spi - switch to using polled mode of input devicesDmitry Torokhov
We have added polled mode to the normal input devices with the intent of retiring input_polled_dev. This converts psxpad-spi driver to use the polling mode of standard input devices and removes dependency on INPUT_POLLDEV. Link: https://lore.kernel.org/r/20191001220421.GA66693@dtor-ws Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-28Input: edt-ft5x06 - add support for regulatorMylène Josserand
Add the support for enabling optional regulator that may be used as VCC source. Signed-off-by: Mylène Josserand <mylene.josserand@bootlin.com> Signed-off-by: Ondrej Jirman <megous@megous.com> Reviewed-by: Rob Herring <robh@kernel.org> # bindings Link: https://lore.kernel.org/r/20191029005806.3577376-2-megous@megous.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-28Input: st1232 - switch to using MT-B protocolDmitry Torokhov
Switch the driver to the slotted variant of multitouch protocol (MT-B) with in-kernel tracking of the contacts. Tested-by: Matthias Fend <Matthias.Fend@wolfvision.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-28Input: st1232 - note that the receive buffer is DMA-safeDmitry Torokhov
The receiving buffer is allocated separately from the main driver data structure, and is naturally DMA-safe, so mark it as such when building I2C transfer message. Tested-by: Matthias Fend <Matthias.Fend@wolfvision.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-28Input: st1232 - do not set parent device explicitlyDmitry Torokhov
devm_input_allocate_device() already sets parent device for us. Tested-by: Matthias Fend <Matthias.Fend@wolfvision.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-28Input: st1232 - do not allocate fingers data separatelyDmitry Torokhov
The finger structure size is quite small and allocating it together with the main driver structure will not increase likelyhood of allocation failing, but reduces number of objects needing to be tracked by the allocator and devm. Tested-by: Matthias Fend <Matthias.Fend@wolfvision.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-28Input: st1232 - do not reset the chip too earlyDmitry Torokhov
We should not be putting the chip into reset while interrupts are enabled and ISR may be running. Fix this by installing a custom devm action and powering off the device/resetting GPIO line from there. This ensures proper ordering. Tested-by: Matthias Fend <Matthias.Fend@wolfvision.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-28Input: st1232 - rely on I2C core to configure wakeup interruptDmitry Torokhov
When I2C client is created with I2C_CLIENT_WAKE flag (which happens either because we have "wakeup-source" device property or the flag was passed in when creating an I2C client manually), I2C core will take care of configuring interrupt as wakeup source on suspend. Tested-by: Matthias Fend <Matthias.Fend@wolfvision.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-28Input: st1232 - do not unconditionally configure as wakeup sourceDmitry Torokhov
Do not unconditionally configure the touchscreen as wakeup source but rather rely on I2C core to do that when requested (either via "wakeup-source" device property, or when creating a client with I2C_CLIENT_WAKE flag). Tested-by: Matthias Fend <Matthias.Fend@wolfvision.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-28Input: st1232 - simplify parsing of read bufferDmitry Torokhov
Avoid complex 2-variable loop when parsing touchscreen data to make the code clearer. Acked-by: Martin Kepplinger <martink@posteo.de> Tested-by: Matthias Fend <Matthias.Fend@wolfvision.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-27Input: wacom_i2c - remove unneeded gpio.h header fileFabio Estevam
There is no gpio functions used in the driver that is exported by the gpio.h header, so remove this unneeded header. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20191026185958.24158-3-festevam@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-27Input: s3c2410_ts - remove unneeded gpio.h header fileFabio Estevam
There is no gpio functions used in the driver that is exported by the gpio.h header, so remove this unneeded header. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20191026185958.24158-2-festevam@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-27Input: colibri-vf50-ts - remove unneeded gpio.h header fileFabio Estevam
The touchscreen device is a GPIO consumer, not a GPIO controller, so there is no need to include <linux/gpio.h>. Remove the unneeded header file. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20191026185958.24158-1-festevam@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-27Input: gpio_keys_polled - switch to using devm_fwnode_gpiod_get()Dmitry Torokhov
devm_fwnode_get_gpiod_from_child() is going away as the name is too unwieldy, let's switch to using the new devm_fwnode_gpiod_get(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-27Input: gpio_keys - switch to using devm_fwnode_gpiod_get()Dmitry Torokhov
devm_fwnode_get_gpiod_from_child() is going away as the name is too unwieldy, let's switch to using the new devm_fwnode_gpiod_get(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-27Merge tag 'v5.4-rc5' into nextDmitry Torokhov
Sync up with mainline.
2019-10-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fix from Dmitry Torokhov: "A fix for st1232 driver to properly report coordinates for 2nd and subsequent fingers when more than one is on the surface" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: st1232 - fix reporting multitouch coordinates
2019-10-23Input: adp5589 - make keypad support optionalLars-Peter Clausen
On some platforms the adp5589 is used in GPIO only mode. On these platforms we do not want to register a input device, so make that optional and only create the input device if a keymap is supplied. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20191023070541.13940-1-alexandru.ardelean@analog.com [dtor: dropped unnecessary changes related to passing pdata to various functions] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-23Input: hp_sdc_rtc - remove dead chardev codeArnd Bergmann
The driver contains half of the implementation of /dev/rtc, but this was never completed, and it is now incompatible with the drivers/rtc framework. Remove the chardev completely. If anyone wants to add the functionality later, that shoudl be done through rtc_register_device(). The remaining portions of the driver basically implement a single procfs file that may or may not be used anywhere. Not sure why this is in drivers/input/ though. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Helge Deller <deller@gmx.de> Link: https://lore.kernel.org/r/20191023142521.3643152-1-arnd@arndb.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-21Input: st1232 - fix reporting multitouch coordinatesDixit Parmar
For Sitronix st1633 multi-touch controller driver the coordinates reported for multiple fingers were wrong, as it was always taking LSB of coordinates from the first contact data. Signed-off-by: Dixit Parmar <dixitparmar19@gmail.com> Reviewed-by: Martin Kepplinger <martink@posteo.de> Cc: stable@vger.kernel.org Fixes: 351e0592bfea ("Input: st1232 - add support for st1633") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204561 Link: https://lore.kernel.org/r/1566209314-21767-1-git-send-email-dixitparmar19@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "The main change is that we are reverting blanket enablement of SMBus mode for devices with Elan touchpads that report BIOS release date as 2018+ because there are older boxes with updated BIOSes that still do not work well in SMbus mode. We will have to establish whitelist for SMBus mode it looks like" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: elantech - enable SMBus on new (2018+) systems" Input: synaptics-rmi4 - avoid processing unknown IRQs Input: soc_button_array - partial revert of support for newer surface devices Input: goodix - add support for 9-bytes reports Input: da9063 - fix capability and drop KEY_SLEEP
2019-10-15Input: keyboard - imx_sc: Add i.MX system controller key supportAnson Huang
i.MX8QXP is an ARMv8 SoC which has a Cortex-M4 system controller inside, the system controller is in charge of controlling power, clock and scu key etc.. Adds i.MX system controller key driver support, Linux kernel has to communicate with system controller via MU (message unit) IPC to get scu key's status. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1570412509-7893-2-git-send-email-Anson.Huang@nxp.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-15Input: mpr121 - add polling modeMichal Vokáč
In case the interrupt line is not available, polling can be used to read out the state of the keys. Period of the polling needs to be configured by the poll-interval DT property. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-15Revert "Input: elantech - enable SMBus on new (2018+) systems"Kai-Heng Feng
This reverts commit 883a2a80f79ca5c0c105605fafabd1f3df99b34c. Apparently use dmi_get_bios_year() as manufacturing date isn't accurate and this breaks older laptops with new BIOS update. So let's revert this patch. There are still new HP laptops still need to use SMBus to support all features, but it'll be enabled via a whitelist. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191001070845.9720-1-kai.heng.feng@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-11Input: synaptics-rmi4 - avoid processing unknown IRQsEvan Green
rmi_process_interrupt_requests() calls handle_nested_irq() for each interrupt status bit it finds. If the irq domain mapping for this bit had not yet been set up, then it ends up calling handle_nested_irq(0), which causes a NULL pointer dereference. There's already code that masks the irq_status bits coming out of the hardware with current_irq_mask, presumably to avoid this situation. However current_irq_mask seems to more reflect the actual mask set in the hardware rather than the IRQs software has set up and registered for. For example, in rmi_driver_reset_handler(), the current_irq_mask is initialized based on what is read from the hardware. If the reset value of this mask enables IRQs that Linux has not set up yet, then we end up in this situation. There appears to be a third unused bitmask that used to serve this purpose, fn_irq_bits. Use that bitmask instead of current_irq_mask to avoid calling handle_nested_irq() on IRQs that have not yet been set up. Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Link: https://lore.kernel.org/r/20191008223657.163366-1-evgreen@chromium.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-09Input: pixcir_i2c_ts - remove platform dataDmitry Torokhov
Previous change moved platform data definition into the driver, making it unusable for users. Given that we want to move away from custom platform data structures, and always use device properties (DT, ACPI or static) to configure devices, let's complete the removal. Tested-by: Fabio Estevam <festevam@gmail.com> Tested-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-09Input: pixcir_i2c_ts - do not print error on defer probeFabio Estevam
In the case of defer probe we should not print an error message. This also aligns with how defer probe is handled in the other GPIOs used by this driver. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Tested-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-09Input: pixcir_i2c_ts - print register address in decimalFabio Estevam
The pixcir datasheet lists the registers addresses in decimal and so are PIXCIR_REG_POWER_MODE and PIXCIR_REG_INT_MODE defined in decimal. Change the error messages to print the register addresses in decimal instead of hexadecimal for better readability. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Tested-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-09Input: pixcir_i2c_ts - keep header files sortedFabio Estevam
Keep the header files in alphabetical order to keep it more organized. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Tested-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-10 22:48:01 +0000