summaryrefslogtreecommitdiff
path: root/drivers/media/platform/renesas
AgeCommit message (Collapse)Author
2025-03-04media: rcar-csi2: Move Y8 entry to a better placeTomi Valkeinen
Move the Y8 entry before Y10, so that the entries are in a bit more logical order. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-01-08media: platform: rzg2l-cru: rzg2l-video: Fix the comment in ↵Biju Das
rzg2l_cru_start_streaming_vq() Replace "buffer." -> "buffer", for consistency with rest of the comment blocks in rzg2l_cru_start_streaming_vq(). Reported-by: Pavel Machek <pavel@denx.de> Closes: https://lore.kernel.org/all/ZtWNFuw70nkB37EK@duo.ucw.cz/ Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20240905112508.160560-1-biju.das.jz@bp.renesas.com Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-12-19media: rcar-csi2: Update D-PHY startup on V4MNiklas Söderlund
The latest datasheet (Rev.0.70) updates the D-PHY start-up sequence for D-PHY operation. Unfortunately the datasheet do not add any additional documentation on the magic values. This have been tested together with the MAX96724 available on the single board test platform and it works as expected. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-12-19media: rcar-csi2: Allow specifying C-PHY line orderNiklas Söderlund
Later versions of the V4H datasheet adds documentation for the line order register needed to support all possible configurations. Extend the driver to take the line order for each data line into account when configuring the device. Unfortunately not all registers initially thought to be involved in line order configuration where directly related. One magic value is still in the driver and left as-is, but it is not related to line order as that procedure have now been documented. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-11-11Merge tag 'v6.12-rc7' into __tmp-hansg-linux-tags_media_atomisp_6_13_1Mauro Carvalho Chehab
Linux 6.12-rc7 * tag 'v6.12-rc7': (1909 commits) Linux 6.12-rc7 filemap: Fix bounds checking in filemap_read() i2c: designware: do not hold SCL low when I2C_DYNAMIC_TAR_UPDATE is not set mailmap: add entry for Thorsten Blum ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove() signal: restore the override_rlimit logic fs/proc: fix compile warning about variable 'vmcore_mmap_ops' ucounts: fix counter leak in inc_rlimit_get_ucounts() selftests: hugetlb_dio: check for initial conditions to skip in the start mm: fix docs for the kernel parameter ``thp_anon=`` mm/damon/core: avoid overflow in damon_feed_loop_next_input() mm/damon/core: handle zero schemes apply interval mm/damon/core: handle zero {aggregation,ops_update} intervals mm/mlock: set the correct prev on failure objpool: fix to make percpu slot allocation more robust mm/page_alloc: keep track of free highatomic bcachefs: Fix UAF in __promote_alloc() error path bcachefs: Change OPT_STR max to be 1 less than the size of choices array bcachefs: btree_cache.freeable list fixes bcachefs: check the invalid parameter for perf test ...
2024-10-28media: platform: drop vb2_ops_wait_prepare/finishHans Verkuil
Since commit 88785982a19d ("media: vb2: use lock if wait_prepare/finish are NULL") it is no longer needed to set the wait_prepare/finish vb2_ops callbacks as long as the lock field in vb2_queue is set. Since the vb2_ops_wait_prepare/finish callbacks already rely on that field, we can safely drop these callbacks. This simplifies the code and this is a step towards the goal of deleting these callbacks. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> # for meson-ge2d Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
2024-10-22media: renesas: rzg2l-cru: Add 'yuv' flag to IP format structureLad Prabhakar
Add a 'yuv' flag to the `rzg2l_cru_ip_format` structure to indicate whether a given format is YUV-based and update the `rzg2l_cru_ip_formats` array with this flag appropriately. This change enables a more efficient way to check if the input and output formats use the same colorspace. With this change, we can eliminate the use of `v4l2_format_info()` in `rzg2l_cru_initialize_image_conv()` as the necessary details for the source and destination formats are already available through the `yuv` flag. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20241018133446.223516-24-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-22media: rzg2l-cru: Move register definitions to a separate fileLad Prabhakar
Move the RZ/G2L CRU register definitions from `rzg2l-video.c` to a dedicated header file, `rzg2l-cru-regs.h`. Separating these definitions into their own file improves the readability of the code. Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20241018133446.223516-23-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-22media: rzg2l-cru: Add support to capture 8bit raw sRGBLad Prabhakar
Add support to capture 8bit Bayer formats. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20241018133446.223516-22-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-22media: rzg2l-cru: Refactor ICnDMR register configurationLad Prabhakar
Refactor the ICnDMR register configuration in `rzg2l_cru_initialize_image_conv()` by adding a new member `icndmr` in the `rzg2l_cru_ip_format` structure. Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20241018133446.223516-21-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-22media: rzg2l-cru: csi2: Use rzg2l_csi2_formats array in enum_frame_sizeLad Prabhakar
Make use of `rzg2l_csi2_formats` array in rzg2l_csi2_enum_frame_size() to validate if the `fse->code` is supported. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20241018133446.223516-20-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-22media: rzg2l-cru: video: Implement .link_validate() callbackLad Prabhakar
Implement the `.link_validate()` callback for the video node and move the format checking into this function. This change allows the removal of `rzg2l_cru_mc_validate_format()`. Note, the fmt.format.code and fmt.format.field checks have be dropped as the subdev .set_fmt() handler ensures that those fields always hold valid values. Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20241018133446.223516-19-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-22media: rzg2l-cru: csi2: Remove unused field from rzg2l_csi2_formatLad Prabhakar
Remove the unused `datatype` field from the `rzg2l_csi2_format` struct and update the `rzg2l_csi2_formats[]` array to reflect the updated structure. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20241018133446.223516-18-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-22media: rzg2l-cru: Use `rzg2l_cru_ip_formats` array in enum_frame_sizeLad Prabhakar
Use the `rzg2l_cru_ip_formats` array in `rzg2l_cru_ip_enum_frame_size()` to validate the format code. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20241018133446.223516-17-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-22media: rzg2l-cru: Make use of v4l2_format_info() helpersLad Prabhakar
Make use of v4l2_format_info() helpers to determine the input and output formats. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20241018133446.223516-16-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-22media: rzg2l-cru: Inline calculating bytesperlineLad Prabhakar
Remove the `rzg2l_cru_format_bytesperline()` function and inline the calculation of `bytesperline` directly in `rzg2l_cru_format_align()`. This simplifies the code by removing an unnecessary function call and directly multiplying the image width by the `bpp` (bytes per pixel) from the format structure. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20241018133446.223516-15-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-22media: rzg2l-cru: Simplify handling of supported formatsLad Prabhakar
Refactor the handling of supported formats in the RZ/G2L CRU driver by adding `pixelformat` and `bpp` members to the `rzg2l_cru_ip_format` structure. New helper functions, `rzg2l_cru_ip_format_to_fmt()` and `rzg2l_cru_ip_index_to_fmt()`, are added to retrieve format information based on 4CC format and index, respectively. These helpers allow the removal of the now redundant `rzg2l_cru_format_from_pixel()` function. The new helpers are used in `rzg2l_cru_format_bytesperline()`, `rzg2l_cru_format_align()`, and `rzg2l_cru_enum_fmt_vid_cap()`, streamlining the handling of supported formats and improving code maintainability. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20241018133446.223516-14-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-22media: rzg2l-cru: Inline calculating image sizeLad Prabhakar
Inline the `rzg2l_cru_format_sizeimage()` function into its single caller as the function is trivial and is not expected to be called anywhere else. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20241018133446.223516-13-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-22media: rzg2l-cru: Simplify configuring input format for image processingLad Prabhakar
Move the `rzg2l_cru_ip_format` struct to `rzg2l-cru.h` for better accessibility and add a `datatype` member to it, allowing the configuration of the ICnMC register based on the MIPI CSI2 data type. Also, move the `rzg2l_cru_ip_code_to_fmt()` function to `rzg2l-cru.h` to streamline format lookup and make it more accessible across the driver. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20241018133446.223516-12-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-22media: rzg2l-cru: Remove unnecessary WARN_ON check in format funcLad Prabhakar
`WARN_ON(!fmt)` check in `rzg2l_cru_format_bytesperline()` is unnecessary because the `rzg2l_cru_format_align()` function ensures that a valid `pixelformat` is set before calling `rzg2l_cru_format_bytesperline()`. As a result, `rzg2l_cru_format_from_pixel()` is guaranteed to return a non-NULL value, making the check redundant. Additionally, the return type of `rzg2l_cru_format_bytesperline()` is `u32`, but the code returned `-EINVAL`, a negative value. This mismatch is now resolved by removing the invalid error return path. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20241018133446.223516-11-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-22media: rzg2l-cru: Remove unused fields from rzg2l_cru_ip_format structLad Prabhakar
Simplified the `rzg2l_cru_ip_format` struct by removing the unused `datatype` and `bpp` fields from the structure in `rzg2l-ip.c`. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20241018133446.223516-10-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-22media: rzg2l-cru: Use MIPI CSI-2 data types for ICnMC_INF definitionsLad Prabhakar
The INF field in the ICnMC register accepts data type codes as specified in the MIPI CSI-2 v2.1 specification. This patch introduces the `ICnMC_INF()` macro to use the MIPI CSI-2 data types, which are available in the `media/mipi-csi2.h` header. Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20241018133446.223516-9-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-22media: rzg2l-cru: Remove `channel` member from `struct rzg2l_cru_csi`Lad Prabhakar
Remove the CSI virtual channel number from `struct rzg2l_cru_csi`. Instead, pass the CSI virtual channel number as an argument to `rzg2l_cru_csi2_setup()`. Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20241018133446.223516-8-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-22media: rzg2l-cru: Retrieve virtual channel informationLad Prabhakar
The RZ/G2L CRU needs to configure the ICnMC.VCSEL bits to specify which virtual channel should be processed from the four available VCs. To retrieve this information from the connected subdevice, the .get_frame_desc() function is called. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20241018133446.223516-7-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-22media: rzg2l-cru: csi2: Implement .get_frame_desc()Lad Prabhakar
The RZ/G2L CRU requires information about which VCx to process data from, among the four available VCs. To obtain this information, the .get_frame_desc() routine is implemented. This routine, in turn, calls .get_frame_desc() on the remote sensor connected to the CSI2 bridge. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20241018133446.223516-6-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-22media: rzg2l-cru: csi2: Use ARRAY_SIZE() in media_entity_pads_init()Lad Prabhakar
The media_entity_pads_init() function was previously hardcoded to use a magic number for the number of pads. Replace the magic number with the ARRAY_SIZE() macro to determine the number of pads dynamically. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20241018133446.223516-5-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-22media: rzg2l-cru: csi2: Mark sink and source pad with MUST_CONNECT flagLad Prabhakar
Mark the sink and source pad with the MEDIA_PAD_FL_MUST_CONNECT flag to ensure pipeline validation fails if it is not connected. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20241018133446.223516-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-22media: rzg2l-cru: Mark sink and source pad with MUST_CONNECT flagLad Prabhakar
Mark the sink and source pad with the MEDIA_PAD_FL_MUST_CONNECT flag to ensure pipeline validation fails if it is not connected. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20241018133446.223516-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-22media: rzg2l-cru: Use RZG2L_CRU_IP_SINK/SOURCE enum entriesLad Prabhakar
Use enum values (`RZG2L_CRU_IP_SINK` and `RZG2L_CRU_IP_SOURCE`) instead of hardcoded array indices. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20241018133446.223516-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-22media: platform: rzg2l-cru: rzg2l-video: Set AXI burst max lengthBiju Das
As per the hardware manual section 35.2.3.26 'AXI Master Transfer Setting Register for CRU Image Data', it is mentioned that to improve the transfer performance of CRU, it is recommended to use AXILEN value '0xf' for AXI burst max length setting for image data. Signed-off-by: Hien Huynh <hien.huynh.px@renesas.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20240905111828.159670-1-biju.das.jz@bp.renesas.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-16media: platform: rzg2l-cru: rzg2l-video: Move request_irq() to probe()Biju Das
Move request_irq() to probe(), in order to avoid requesting IRQ during device start which happens frequently. As this function is in probe(), it is better to replace it with its devm variant for managing the resource efficiently. While at it, drop the IRQF_SHARED flag as currently there is a single user for this IRQ. Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-10-16media: rcar-vin: Add support for RAW10Niklas Söderlund
Some R-Car SoCs are capable of capturing RAW10. Extend the format enumeration, validation and setup to expose and configure for this format if the particular device supports it. The VIN is usually capable of converting from most media bus formats to a range of different pixel formats. However if the input media bus format is a RAW10 format this is not possible so the corresponding pixel output format is forced. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-10-16media: rcar-isp: Add family compatible for R-Car Gen4 familyNiklas Söderlund
Add the Gen4 family compatible. This will be used instead of a SoC specific compatible for the new Gen4 SoC V4M. Two Gen4 boards (V3U and V4H) have already been added prior and their bindings need to be kept for backward compatibility. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-10-16media: rcar-csi2: Add support for R-Car V4MNiklas Söderlund
The V4M is the second Gen4 device that is enabled in the rcar-csi2 driver. There is much overlap with the already supported V4H device. The registers that where new on Gen4 and where added with the V4H prefix are retained and only new registers unique to the V4M are added with the new V4M prefix. This follows the style for when V4H was added which had an overlap with Gen3 registers. The V4M CSI-2 receiver supports D-PHY mode only, either in 1-, 2- or 4-lane configuration. The datasheets do not document lane swapping and is left out for now. While the V4M only supports D-PHY the configuration for it is added in such a way that it can be reused for V4H which supports both C-PHY and D-PHY. No known SoC exists to test the D-PHY configuration on V4H so it's not wired-up. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-10-16media: rcar-csi2: Add documentation for PHY_EN and PHY_MODE registersNiklas Söderlund
Later datasheets add documentation for two magic value used for V4H support. The same registers will also be used for V4M support, document them. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-10-16media: rcar-csi2: Move PHTW write helpersNiklas Söderlund
Prepare for V4M support by moving the PHTW write helpers to the generic write helpers. This is needed as adding V4M support will involve interact with the PHTW register from code that are logically grouped with similar code in such a way that forward declarations of these helpers would otherwise be needed. The functions are moved verbatim. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-10-16media: rcar-csi2: Add helper to lookup mbps settingsNiklas Söderlund
The structure mapping a configuration information to a particular mpbs setting needs to be extended with more information to support future SoCs. Before it is extended reduce code duplication by creating a helper to lookup information from an array of mbps setting, the lookup code has already been copied to two speared locations. While at it rename the structure to make it clear it contains information related to a mbps setting, not just a single register value. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-10-16media: rcar-csi2: Abstract PHTW and PHYPLL register offsetsNiklas Söderlund
Most of the registers used on the R-Car V4M CSI-2 IP are shared with the devices already supported by the rcar-csi2 driver. Two registers which function and layout are the same are however found on different offsets. Prepare for adding support for R-Car V4M by storing the offset to these two registers offsets in the device information structured. This way the code, which is shared between the devices, can be reused when V4M support is added. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-10-16media: rcar-csi2: Allow writing any code and data value to PHTWNiklas Söderlund
The helper to write an array of code and data values to the PHY Test Interface Write Register (PHTW) register uses the case where both code and data are zero as an exit condition. This prevents writing data = 0 and code = 0 to the register. Up until now this has been OK as no such combination where needed, and it was a convenient exit condition. In future writing data = 0 and code = 0 to the PHTW register will be needed. Avoid using an exit condition when writing an array of PHTW values and instead pass the length of the array to the helper. This allows any combination of code and data to be written. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-10-16media: rcar-csi2: Correct field size for PHTW writesNiklas Söderlund
The data and code written thru the Test Interface Write Register (PHTW) register are 8-bit wide, change the datatype used to reflect this. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-10-12media: Switch back to struct platform_driver::remove()Uwe Kleine-König
After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/media to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-10-12media: rcar_drif.c: set lock before calling vb2_queue_init()Hans Verkuil
The vb2_queue_init() will expect the vb2_queue lock pointer to be set in the future. So for those drivers that set the lock later, move it up to before the vb2_queue_init() call. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Cc: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-10-02move asm/unaligned.h to linux/unaligned.hAl Viro
asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-08-28Merge tag 'next-media-20240826' of ↵Hans Verkuil
git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git Improvements to link validation in media graph. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.linuxtv.org/project/linux-media/patch/20240826141040.GC11033@pendragon.ideasonboard.com/
2024-08-26media: renesas: vsp1: Implement .link_validate() for video devicesLaurent Pinchart
The v4l2_subdev_link_validate() helper prints a warning if the .link_validate() operation is not implemented for video devices connected to the subdevs. Implement the operation to silence the warning. Ideally validation of the link between the video device and the subdev should be implemented in that operation. That would however break userspace that does not configure formats on all video devices before starting streaming. While this mode of operation may not be considered valid by the V4L2 API specification (interpretation differ), it is nonetheless supported by the vsp1 driver at the moment and used by at least the vsp1 unit test suite, and possibly other userspace applications. Removing it would be a regression. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2024-08-23media: rcar-vin: Add family compatible for R-Car Gen4 familyNiklas Söderlund
Add the Gen4 family compatible. This will be used instead of a SoC specific compatible for the new Gen4 SoC V4M. Two Gen4 boards (V3U and V4H) have already been added prior and their bindings need to be kept for backward compatibility. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20240704161620.1425409-5-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-08-23media: platform: rzg2l-cru: rzg2l-csi2: Add missing MODULE_DEVICE_TABLEBiju Das
The rzg2l-csi2 driver can be compiled as a module, but lacks MODULE_DEVICE_TABLE() and will therefore not be loaded automatically. Fix this. Fixes: 51e8415e39a9 ("media: platform: Add Renesas RZ/G2L MIPI CSI-2 receiver driver") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20240731164935.308994-1-biju.das.jz@bp.renesas.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-20media: renesas: vsp1: Initialize control handler after subdevLaurent Pinchart
Some VSP modules initialize their control handler after initializing the subdev, while some initialize it before. This makes the code inconsistent and more error prone. Standardize on control initialization after initializing the subdev. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
2024-06-20media: renesas: vsp1: Pass subdev state to entity operationsLaurent Pinchart
To prepare for the removal of the vsp1_entity.state field, pass the state to all entity operations that needs to access it, instead of accessing the state from the entity inside the operation handlers. This lowers the number of accesses to the field. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
2024-06-20media: renesas: vsp1: Name parameters to entity operationsLaurent Pinchart
checkpatch.pl complains when function arguments are not named: WARNING: function definition argument 'struct vsp1_entity *' should also have an identifier name + void (*configure_stream)(struct vsp1_entity *, In preparation for reworking some of the vsp1_entity_operations functions, fix the warnings for the existing ones. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
generated by cgit (git 2.34.1) at 2025-07-28 21:21:30 +0000