| Age | Commit message (Collapse) | Author |
|---|
|
In case of single staged cs with both first/last indications
set, we reach a scenario where in cs_release function flow
we don't cancel the TDR work before freeing the cs memory,
this lead to kernel OOPs since when the timer expires
the work pointer will be freed already.
In addition treat wait encaps cs "not found" handle
as "OK" for the user in order to keep the user interface
for both legacy and encpas signal/wait features the same.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
We have a potential race where a user interrupt can be received
in between user thread value comparison and before request was
added to wait list. This means that if no consecutive interrupt
will be received, user thread will timeout and fail.
The solution is to add the request to wait list before we
perform the comparison.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
When the f/w runs in secured mode, it can reset the ASIC when certain
events occur. In unsecured mode, the driver asks the f/w to reset the
ASIC for those events.
We need to perform the entire reset procedure but without accessing the
ASIC. i.e. without halting the engines and without sending messages
to the f/w.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Fix 2 areas in the code where it's possible the code will
go to sleep while holding a spinlock.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
copy_from_user might sleep so we can never call it when we have
a spinlock.
Moreover, it is not necessary in waiting for user interrupt, because
if multiple threads will call this function on the same interrupt,
each one will have it's own fence object inside the driver. The
user address might be the same, but it doesn't really matter to us,
as we only read from it.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Checking if the device is operational when entering the function to
wait for user interrupt is not something that is useful or necessary.
It is not done in any other wait_for_cs ioctl path.
If the device becomes non-operational during the wait, the reset
function will make sure the process wait is interrupted.
Instead, move the check to the beginning of hl_wait_ioctl(). It will
block any attempt to wait on CS or user interrupt once the device
is already marked as non-operational.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Because this spinlock is taken in an interrupt handler, we must use
the spin_lock_irqsave/irqrestore version to disable the interrupts
on the local CPU. Otherwise, we can have a potential deadlock (if
the interrupt handler is scheduled to run on the same cpu that the
code who took the lock was running on).
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
On init, the disabled state is cleared right before hw_init and that
causes the device to report on "Operational" state before the device
initialization is finished. Although the char device is not yet exposed
to the user at this stage, the sysfs entries are exposed.
This can cause errors in monitoring applications that use the sysfs
entries.
In order to avoid this, a new state "in device creation" is introduced
to ne reported when the device is not disabled but is still in init
flow.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
It is useful to have the ability to see which user address was pinned
to which physical address during the initial mapping. We already have
all that info stored, but no means to search this data (which may be
quite large).
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
During the integration, the multi-CS requirements were refined:
- The multi CS call shall wait on "per-ASIC" predefined stream masters
instead of set of streams.
- Stream masters are set of QIDs used by the upper SW layers (synapse)
for completion (must be an external/HW queue).
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Various f/w versions have different timeouts, so increase the default
timeout to accommodate all the options.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The address resolution via debugfs was not taking into consideration the
page offset, resulting in a wrong address.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Currently userptr endpoint in debugfs prints out virtual addresses
in the user process memory space, without specifying their owner process
ID. User space virtual address is meaningless without knowing the owner
process.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
For some ASICs, the f/w reads the msg_to_cpu_reg value after
reset, and for some it doesn't.
Therefore, to be sure f/w doesn't read a wrong value after reset, we
need to clear this register before the reset occurs.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In order to better support variants of the same ASIC
the set_pci_regions function is now an ASIC function which
allows each ASIC to implement it internally, thus keeping
all definitions static to the file.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Done as the bar size can exceed 4GB.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Add the server type property to the hl_info_hw_ip_info structure
that is exposed to the user via the INFO IOCTL.
This is needed by the userspace s/w stack to know the connections map
of the internal links that connect the ASIC among themselves inside the
server.
The F/W will tell us, as part of the NIC information, the server type
that the GAUDI is located in.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
This warning is redundant as we will print a notice in case the device
is still in use after the FD was closed. No need to print the same
message per context.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
This commit is the second part of the encapsulated signals feature.
It contains the driver support for submission of cs with encapsulated
signals and the wait for them.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The signaling from within encapsulated OP capability is merged into the
existing stream architecture, such that one can trigger multiple
signaling from an encapsulated op, according to the time the event
was done in the graph execution and avoid the need to wait for the
whole encapsulated OP execution to be complete before the stream can
signal.
This commit implements only the reserve/unreserve part.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Currently the SOB reset was in fence release function which happens
only at the CS wraparound during the CS allocation time.
In order to support the new encapsulated signals reservation feature,
we need to move the SOB reset to an earlier phase because this SOB
could reach it's max value very fast using the signal reservation.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
When user sends multiple CSs, waiting for each CS is not efficient
as it involves many user-kernel context switches.
In order to address this issue we add support to "wait on multiple CSs"
using a new uAPI which can wait on maximum of 32 CSs. The new uAPI is
defined using a new flag - WAIT_FOR_MULTI_CS - in the wait_for_cs IOCTL.
The input parameters for this uAPI will be:
@seq: user pointer to an array of up to 32 CS's sequence numbers.
@seq_array_len: length of sequence array.
@timeout_us: timeout for waiting for any CS.
The output paramateres for this API will be:
@status: multi CS ioctl completion status (dedicated status was added as
well).
@flags: bitmap of output flags of the CS.
@cs_completion_map: bitmap for multi CS, if CS sequence that was placed
in index N in input seq array has completed- the N-th
bit in cs_completion_map will be 1, otherwise it will
be 0.
@timestamp_nsec: timestamp of the first completed CS
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
To add proper support for wait-for-multi-CS, locking the CS lock
for each CS fence in the list is not efficient.
Instead, this patch add support to lock the CS lock once to get all
required fences.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The driver quietly handles memory mappings that were not freed so no
need to print a warning about that when user closes the FD.
Accordingly, revise the text that is printed in case the device is
still in use after the user process closed the FD.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
There is a scenario where an ongoing soft reset would race with an
ongoing heartbeat routine, eventually causing heartbeat to fail and
thus to escalate into a hard reset.
With this fix, soft-reset procedure will disable heartbeat CPU messages
and flush the (ongoing) current one before continuing with reset code.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
This is required from any device that is capable to perform DMA.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Each ASIC can have a different offset to add to a host dma address,
to enable the ASIC to access that host memory.
The usage for this can be common code so add this to the asic
property structure.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Recently, the size parameter in userptr structure was change to u64.
As a result, we need to change the type of the local range_size
in device_va_to_pa() to u64 to avoid overflow.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
If hard reset fails after the call to hw_fini and before loading the
linux image to the device, a subsequent call to hw_fini should
communicate via COMMS (or MSG_TO_CPU regs for old FW versions).
However, the driver still tries in this case to communicate via the GIC,
and thus no hard reset is actually done.
To avoid that, the patch clears the linux_loaded flag after every call
to hw_fini.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In case of host-resident MMU, when the page tables pool is destroyed,
its pointer is not nullified correctly.
As a result, on a device fini which happens after a failing reset, the
already destroyed pool is accessed, which leads to a kernel panic.
The patch fixes the setting of the pool pointer to NULL.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
This function will be used for more mmap operations than just
mmaping CBs.
Signed-off-by: Zvika Yehudai <zyehudai@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
missing mutex unlock once driver is giving up killing user processes.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
With the infrastructure in place, monitors and fences dump shall be
implemented.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
To improve the user's ability to debug the case where a workload that
is part of executing training/inference of a topology is getting stuck,
we need to add a 'core dump' each time a CS times-out. The 'core dump'
shall contain all relevant Sync Manager information and corresponding
fence values.
The most recent dumps shall be accessible via debugfs, under
'state_dump' node. Reading from the node will provide the oldest dump
available. Writing an integer value X will discard X dumps, starting
with the oldest one, i.e. subsequent read will now return newer
dumps.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The previous function we used, find_get_pid(), wasn't good in case
the user process was run inside docker.
As a result, we didn't had the PID and we couldn't kill the user
process in case the device got stuck and we needed to reset the
device.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Sometimes we may need to disable optimization of using huge pages
in our memory management code. Add such a flag to the function that
creates the list of physical pages that would be programmed into the
device MMU.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Increase the size variable in the userptr structure to 64-bit. That
variable describes the size of the memory allocation of the user that
is now being mapped into the device. The mapping can be larger than
4GB, so we need to support it.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Same as we handle it in the regular wait for CS, we need to handle the
case where the waiting for user interrupt was interrupted. In that case,
we need to return correct error code to the user.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In device fini there was missing a call to release all pending user
interrupts. That can cause a process to be stuck inside the driver's
IOCTL of wait for interrupts, in case the device is removed or
simulator is killed at the same time.
In addition, also call to remove inactive codec job was missing.
Moreover, to prevent such errors in the future (where code is added
to reset path but not to device fini), we moved some common parts
to two dedicated functions:
cleanup_resources
take_release_locks
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In case user interrupt arrived but the completion value is less than
the target value, we want to retry the wait.
However, before the retry we must reinitialize the completion object,
under spin-lock, so the wait function won't exit immediately because
the completion object is already completed (from the previous
interrupt).
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
We don't use typedefs so the enum name shouldn't end with _t
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Update recent changes made in firmware header files, which contain
a minor COMMS protocol change and new error status definitions.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
A new user flag is required to make memory map hint mandatory, in
contrast to the current situation where it is best effort.
This is due to the requirement to map certain data to specific
pre-determined device virtual address ranges.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Add support for pre-determined driver-reserved device VA address ranges.
This is needed for future ASIC support where some contents must be
mapped into these pre-determined ranges because the H/W will be
configured using these ranges.
In case the user asks to map a VA without a hint address, avoid
allocating the device VA from the reserved ranges.
Make sure the validation checks of the hint address take into account
situation where the DRAM page size is not pow of 2.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
There is code related to hard-reset, which is done in gaudi specific
code. However, this code can be used by future ASICs and therefore it
is better to move it to the common code section.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In preparation for a new feature that allows the user to reserve
signals ahead of submissions, we need to change a current assumption
in the code.
Currently, the driver uses 2 SOBs to support signal CS. When the first
SOB reaches max value, the driver switches to the other one and assumes
that when it will need to switch back to the first one, all of the
signals have already been handled.
This assumption won't hold when the new feature will be added, because
using signal reservation, the driver can reach the max SOB value very
fast.
The change is to add a validity check when submitting a signal CS, to
make sure the previous SOB is available (all the signals attached to
it indeed finished).
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
We introduce a new type of reset which is reset upon device release.
This reset is very similar to soft reset except the fact it is
performed only upon device release and not upon user sysfs request
nor TDR.
The purpose of this reset is to make sure the device is returned to
IDLE state after the current user has finished working with the device.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
To be able to debug long-running CS better, without changing the
userspace code, we are adding a new option through debugfs interface
to skip the reset of the device in case of CS timeout.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
fix a spelling error in comment
Signed-off-by: Zvika Yehudai <zyehudai@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
There was a rogue #ifdef that crept into the upstream code for
backwards compatibility which isn't needed of course.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
