| Age | Commit message (Collapse) | Author |
|---|
|
This error indicates a problem in the security initialization inside
the f/w so we need to stop the device loading because it won't be
usable.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
If we read all FF from the boot status register, then something is
totally wrong and there is no point of reading specific errors.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Currently the user cannot interpret the PLL information based on index
as its exposed as an integer.
This commit exposes ASIC specific PLL indexes and maps it to a generic
FW compatible index.
Signed-off-by: Bharat Jauhari <bjauhari@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
We need to print a message to the kernel log in case we encounter
an unknown error in the f/w boot to help the user understand what
happened.
In addition, we shouldn't print unknown error in case of known errors.
Moreover, in case of warnings/info, we shouldn't return -EIO that will
fail the initialization and mark the device as disabled
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
As part of the securing GAUDI, the F/W will configure the PCI iATU
regions. If the driver identifies a secured PCI ID, it will know to
skip iATU configuration in a very early stage.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
As F/ security indication must be available before driver approaches
PCI bus, F/W security should be derived from PCI id rather than be
fetched during boot handshake with F/W.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
DRAM scrubbing can take time hence it adds to latency during allocation.
To minimize latency during initialization, scrubbing is moved to release
call.
In case scrubbing fails it means the device is in a bad state,
hence HARD reset is initiated.
Signed-off-by: Bharat Jauhari <bjauhari@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In order to minimize hard coded values between F/W and the driver, we
send msi-x indexes dynamically to the F/W.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In case of multiple ECC errors, FW will set the DEVICE_UNUSABLE bit.
On boot-up, the driver will therefore fail inserting the device.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Prefer the use of strscpy when copying the ASIC name into a char array,
to prevent accidentally exceeding the array's length.
In addition, strlcpy is frowned upon so replace it.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
When trying to debug program, the user often needs to
dump large parts of the device's DRAM, which can reach to tens of GBs.
Because reading from the device's internal memory through the PCI BAR
is extremely slow, the debug can take hours.
Instead, we can provide the user to copy data through one of the DMA
engines. This will make the operation much faster.
Currently, only GAUDI is supported.
In GAUDI, we need to find a PCI DMA engine that is IDLE and set the
DMA as secured to be able to bypass our MMU as we currently don't
map the temporary buffer to the MMU.
Example bash one-line to dump entire HBM to file (~2 minutes):
for (( i=0x0; i < 0x800000000; i+=0x8000000 )); do \
printf '0x%x\n' $i | sudo tee /sys/kernel/debug/habanalabs/hl0/addr ; \
echo 0x8000000 | sudo tee /sys/kernel/debug/habanalabs/hl0/dma_size ; \
sudo cat /sys/kernel/debug/habanalabs/hl0/data_dma >> hbm.txt ; done
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
There is a need to allow to user to send command submissions with
custom timeout as some CS take longer than the max timeout that is
used by default.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The new approach is based on the notion that the relative
current power consumption is in relation of proportionality
to device's true utilization.
Utilization info ranges between [0,100]%
Currently, dc_power values are hard-coded.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In order to use minimum of hard coded values common to LKD and F/W
a dynamic method to work with PLLs is introduced in this patch.
Formerly asic specific PLL numbering is now common for all asics.
To be backward compatible a bit in dev status is defined, if the bit is
not set LKD will keep working with old PLL numbering.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In order to shorten the time cs lock is being held, we move any
possible work outside of the cs lock.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Add a little sleep between page unmappings in case mapping of
large number of host pages failed, in order to
avoid soft lockup bug during the rollback.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In order to have a better debuggability we allow debugfs access
to user mmu mapped host memory. Non-user host memory access will be
rejected.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
fixed the following coccicheck:
./drivers/misc/habanalabs/common/sysfs.c:347:60-61: WARNING opportunity
for kobj_to_dev()
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
if reset is due to heartbeat, device CPU is no responsive in which
case no point sending PCI disable message to it.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
As there are incorrect assumptions in which some of the
initialization and data path flows cannot sleep, most allocations
are being done using GFP_ATOMIC.
We modify the code to use GFP_ATOMIC only when realy needed, as
sleepable flow should use GFP_KERNEL.
In addition add a fallback to allocate memory using GFP_KERNEL,
once ATOMIC allocation fails.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Add driver implementation for reading the current power from the device
CPU F/W.
Signed-off-by: Sagiv Ozeri <sozeri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Improve "vm" debugfs node to print also the virtual addresses which are
currently mapped to HW blocks in the device.
Signed-off-by: Sagiv Ozeri <sozeri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
For simplicity, use a single bringup flag indicating which FW
binaries should loaded to device.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Timeout in wait for interrupt is in 32-bit variable so we need to use
the correct maximum value to compare.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In order to support command submissions from user space, the driver
need to add support for user interrupt completions. The driver will
allow multiple user threads to wait for an interrupt and perform
a comparison with a given user address once interrupt expires.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In order to support user interrupts, driver must enable all MSI-X
interrupts for any case user will trigger them. We differentiate
between a valid user interrupt and a non valid one.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Because our graph contains network operations, we need to account
for delay in the network.
5 seconds timeout per CS is not enough to account for that.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Notify to the user that although he closed the FD, the device is
still in use because there are live CS and/or memory mappings (mmaps).
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Move the field to correct location in structure and remove comment.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
After any reset (soft or hard) the device (the engines/QMANs) should
be idle. If they are not idle, fail the reset. If it is soft-reset,
the driver will try to do hard-reset automatically. If it is hard-reset,
the driver will make the device non-operational.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The device is actually released only after the refcnt of the hpriv
structure is 0, which means all its contexts were closed.
If we reset the device while a context is still open, there are
possibilities for unexpected behavior and crashes. For example, if the
process has a mapping of a register block that is now currently being
reset, and the process writes/reads to that block during the reset,
the device can get stuck.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In order to support command submissions that are done directly from
user space, the driver must perform soft reset once user closes its FD.
In case the soft reset fails or device is not idle, a hard reset should
be performed.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
when user uses virtual addresses to access dram through debugfs,
driver translate this address to physical and use it
for the access through the pcie bar.
in case dram page size is different than the dmmu
page size, we need to have special treatment
for adding the page offset to the actual address, which
is to use the dram page size mask to fetch the page offset
from the virtual address, instead of the dmmu last hop shift.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
A device can be removed from the PCI subsystem while a process holds the
file descriptor opened.
In such a case, the driver attempts to kill the process, but as it is
still possible that the process will be alive after this step, the
device removal will complete, and we will end up with a process object
that points to a device object which was already released.
To prevent the usage of this released device object, disable the
following file operations for this process object, and avoid the cleanup
steps when the file descriptor is eventually closed.
The latter is just a best effort, as memory leak will occur.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The refcount of the "hl_fpriv" structure is not used for the control
device, and thus hl_hpriv_put() is not called when releasing this
device.
This results with no call to put_pid(), so add it explicitly in
hl_device_release_ctrl().
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The dentry for the created debugfs file was being saved, but never used
anywhere. As the pointer isn't needed for anything, and the debugfs
files are being properly removed by removing the parent directory,
remove the saved pointer as well, saving a tiny bit of memory and logic.
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tomer Tayar <ttayar@habana.ai>
Cc: Moti Haimovski <mhaimovski@habana.ai>
Cc: Omer Shpigelman <oshpigelman@habana.ai>
Cc: Ofir Bitton <obitton@habana.ai>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
hl_eq_inc_ptr() is not called from anywhere outside irq.c so mark
it as static
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc/whatever driver subsystem updates
for 5.12-rc1. Over time it seems like this tree is collecting more and
more tiny driver subsystems in one place, making it easier for those
maintainers, which is why this is getting larger.
Included in here are:
- coresight driver updates
- habannalabs driver updates
- virtual acrn driver addition (proper acks from the x86 maintainers)
- broadcom misc driver addition
- speakup driver updates
- soundwire driver updates
- fpga driver updates
- amba driver updates
- mei driver updates
- vfio driver updates
- greybus driver updates
- nvmeem driver updates
- phy driver updates
- mhi driver updates
- interconnect driver udpates
- fsl-mc bus driver updates
- random driver fix
- some small misc driver updates (rtsx, pvpanic, etc.)
All of these have been in linux-next for a while, with the only
reported issue being a merge conflict due to the dfl_device_id
addition from the fpga subsystem in here"
* tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
spmi: spmi-pmic-arb: Fix hw_irq overflow
Documentation: coresight: Add PID tracing description
coresight: etm-perf: Support PID tracing for kernel at EL2
coresight: etm-perf: Clarify comment on perf options
ACRN: update MAINTAINERS: mailing list is subscribers-only
regmap: sdw-mbq: use MODULE_LICENSE("GPL")
regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ
regmap: sdw: use _no_pm functions in regmap_read/write
soundwire: intel: fix possible crash when no device is detected
MAINTAINERS: replace my with email with replacements
mhi: Fix double dma free
uapi: map_to_7segment: Update example in documentation
uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED
drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue
firewire: replace tricky statement by two simple ones
vme: make remove callback return void
firmware: google: make coreboot driver's remove callback return void
firmware: xilinx: Use explicit values for all enum values
sample/acrn: Introduce a sample of HSM ioctl interface usage
virt: acrn: Introduce an interface for Service VM to control vCPU
...
|
|
git://anongit.freedesktop.org/drm/drm
Pull follow_pfn() updates from Daniel Vetter:
"Fixes around VM_FPNMAP and follow_pfn:
- replace mm/frame_vector.c by get_user_pages in misc/habana and
drm/exynos drivers, then move that into media as it's sole user
- close race in generic_access_phys
- s390 pci ioctl fix of this series landed in 5.11 already
- properly revoke iomem mappings (/dev/mem, pci files)"
* tag 'topic/iomem-mmap-vs-gup-2021-02-22' of git://anongit.freedesktop.org/drm/drm:
PCI: Revoke mappings like devmem
PCI: Also set up legacy files only after sysfs init
sysfs: Support zapping of binary attr mmaps
resource: Move devmem revoke code to resource framework
/dev/mem: Only set filp->f_mapping
PCI: Obey iomem restrictions for procfs mmap
mm: Close race in generic_access_phys
media: videobuf2: Move frame_vector into media subsystem
mm/frame-vector: Use FOLL_LONGTERM
misc/habana: Use FOLL_LONGTERM for userptr
misc/habana: Stop using frame_vector helpers
drm/exynos: Use FOLL_LONGTERM for g2d cmdlists
drm/exynos: Stop using frame_vector helpers
|
|
When user gives us a block address to get its ID to mmap it, he also
needs to get from us the block size to pass to the driver in the mmap
function.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
when reading CPU_BOOT_DEV_STS0 reg after FW reports SRAM AVAILABLE the
value in the register might not yet be updated by FW.
to overcome this issue another "up-to-date" read of this register is
done at the end of CPU queues init.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Only after the initialization of the device is done, the driver is
ready to receive events from the F/W. The driver can't handle events
before that because of races so it will ignore events. In case of
a fatal event, the driver won't know about it and the device will be
operational although it shouldn't be.
Same logic should be applied after hard-reset.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
User must be aware of the available CQs when it needs to use them.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Current messaging communictaion protocol with cpucp can get out
of sync due to coherency issues. In order to improve the protocol
reliability, we modify the protocol to expect a different
acknowledgment for every packet sent to cpucp.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Need to add ull suffix to constant when doing shift of constant
into 64-bit variables
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
We introduce a new mechanism named Staged Submission.
This mechanism allows the user to send a whole CS in pieces.
Each CS will not require completion rather than the
last CS. Timeout timer will be triggered upon reception of the first
CS in group.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Currently this API uses single 64 bits mask for engines idle indication.
Recently, it was observed that more bits are needed for some ASICs.
This patch modifies the use of the idle mask and the idle_extensions
mask.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In order to support staged submission feature, we need to
distinguish on which command submission we want to receive
timeout and for which we want to receive completion.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
For future ASIC support the driver allows user to map certain regions
in the device's configuration space for direct access from userspace.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In mmu debugfs node show un-scrambled physical addresses.
before read/write through data nodes, need to unscramble the
physical address before using it for pci transaction.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
