summaryrefslogtreecommitdiff
path: root/drivers/misc
AgeCommit message (Collapse)Author
2018-08-02mei: define dma ring buffer sizes for PCH12 HW and newerAlexander Usyskin
Define dma ring buffer sizes for PCH12 (CLN HW and newer) Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-02mei: restrict dma ring support to hbm version 2.1Tomas Winkler
Only a firmware with version 2.1 and above supports dma ring feature. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-02mei: hbm: introduce dma bit in the message headerTomas Winkler
Add dma_ring bit in the mei message header for conveying that the message data itself are on the dma ring. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-02mei: hbm: define dma ring setup protocolTomas Winkler
The protocol defines how to setup an I/O ring on top of host memory to utilize the device DMA engine for faster transport. Three memory buffers are allocated. A Host circular buffer for from the Host to Device communication. A Device circular buffer for from Device to the Host communication. And finally a Control block where the pointers for the both circular buffers are managed. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-02mei: add support for variable length mei headers.Tomas Winkler
Remove header size knowledge from me and txe hw layers, this requires to change the write handler to accept header and its length as well as data and its length. HBM messages are fixed to use basic header, hence we add mei_hbm2slots() that converts HBM message length and mei message header, while mei_data2slots() converts data length directly to the slots. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25eeprom: at24: Add support for address-width propertyAlan Chiang
Provide a flexible way to determine the addressing bits of eeprom. Pass the addressing bits to driver through address-width property. Signed-off-by: Alan Chiang <alanx.chiang@intel.com> Signed-off-by: Andy Yeh <andy.yeh@intel.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2018-07-24mei: add mei_msg_hdr_init wrapper.Tomas Winkler
Wrap the mei header boilerplate initialization code in mei_msg_hdr_init function. On the way remove 'completed' field from mei_cl_cb structure as this information is already included in the header and is local to particular fragment. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-24mei: move hbuf_depth from the mei device to the hw modulesTomas Winkler
The host buffer depth is hardware specific so it's better to handle it inside the me and txe hw modules. In me the depth is read from register in txe it's a constant number. The value is now retrieved via mei_hbuf_depth accessor, while it replaces mei_hbuf_max_len. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-24mei: cleanup slots to data conversionsTomas Winkler
Cleanup conversions between slots and data. Define MEI_SLOT_SIZE instead of using 4 or sizeof(u32) across the source code. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull vfs fixes from Al Viro: "Fix several places that screw up cleanups after failures halfway through opening a file (one open-coding filp_clone_open() and getting it wrong, two misusing alloc_file()). That part is -stable fodder from the 'work.open' branch. And Christoph's regression fix for uapi breakage in aio series; include/uapi/linux/aio_abi.h shouldn't be pulling in the kernel definition of sigset_t, the reason for doing so in the first place had been bogus - there's no need to expose struct __aio_sigset in aio_abi.h at all" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: aio: don't expose __aio_sigset in uapi ocxlflash_getfile(): fix double-iput() on alloc_file() failures cxl_getfile(): fix double-iput() on alloc_file() failures drm_mode_create_lease_ioctl(): fix open-coded filp_clone_open()
2018-07-19cxl: Fix wrong comparison in cxl_adapter_context_get()Vaibhav Jain
Function atomic_inc_unless_negative() returns a bool to indicate success/failure. However cxl_adapter_context_get() wrongly compares the return value against '>=0' which will always be true. The patch fixes this comparison to '==0' there by also fixing this compile time warning: drivers/misc/cxl/main.c:290 cxl_adapter_context_get() warn: 'atomic_inc_unless_negative(&adapter->contexts_num)' is unsigned Fixes: 70b565bbdb91 ("cxl: Prevent adapter reset if an active context exists") Cc: stable@vger.kernel.org # v4.9+ Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-19pci_endpoint_test: Add 2 ioctl commandsGustavo Pimentel
Add MSI-X support and update driver documentation accordingly. Add 2 new IOCTL commands: - Allow to reconfigure driver IRQ type in runtime. - Allow to retrieve current driver IRQ type configured. Add IRQ type validation before executing the READ/WRITE/COPY tests. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-07-19pci-epf-test/pci_endpoint_test: Add MSI-X supportGustavo Pimentel
Add MSI-X support and update driver documentation accordingly. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-07-19pci-epf-test/pci_endpoint_test: Use irq_type module parameterGustavo Pimentel
Add new driver parameter to allow interruption type selection. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-07-19pci-epf-test/pci_endpoint_test: Cleanup PCI_ENDPOINT_TEST memspaceGustavo Pimentel
Cleanup PCI_ENDPOINT_TEST memspace (by moving the interrupt number away from command section). Add IRQ_TYPE register to identify the triggered ID interrupt required for the READ/WRITE/COPY tests and raise IRQ test commands. Update documentation accordingly. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-07-19Merge branch 'topic/ppc-kvm' into nextMichael Ellerman
Merge in some commits we're sharing with the KVM tree. I manually propagated the change from commit d3d4ffaae439 ("powerpc/powernv/ioda2: Reduce upper limit for DMA window size") into pci-ioda-tce.c. Conflicts: arch/powerpc/include/asm/cputable.h arch/powerpc/platforms/powernv/pci-ioda.c arch/powerpc/platforms/powernv/pci.h
2018-07-16misc: vexpress/syscfg: Use devm_ioremap_resource() to map memorySudeep Holla
Instead of checking the return value of platform_get_resource(), we can use devm_ioremap_resource() which has the NULL pointer check and the memory region requesting. devm_ioremap_resource is designed to replace calls to devm_request_mem_region followed by devm_ioremap, so let's use the same. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16drivers/misc: Aspeed LPC snoop output using misc chardevRobert Lippert
Provides the data bytes snooped over the LPC snoop bus to userspace as a (blocking) misc character device. Bytes output from the host using LPC I/O transactions to the snooped port can be watched or retrieved from the character device using a simple command like this: ~# od -w1 -A n -t x1 /dev/aspeed-lpc-snoop0 10 de ad c0 ff ee Signed-off-by: Robert Lippert <rlippert@google.com> Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Benjamin Fair <benjaminfair@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16mei: bus: suppress sign-compare warningsTomas Winkler
Comparison between signed and unsigned warnings and associated type promotion may cause error condition not be detected. The type promotion issue in mei bus was addressed by two patches: commit b40b3e9358fb ("mei: bus: type promotion bug in mei_nfc_if_version()") commit cf1ed2c59b98 ("mei: bus: type promotion bug in mei_fwver()") Now it is possible to suppress the warning, by adding proper casting to move out of radar. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16Merge 4.18-rc5 into char-misc-nextGreg Kroah-Hartman
We want the char-misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16powerpc/64s: Remove POWER9 DD1 supportNicholas Piggin
POWER9 DD1 was never a product. It is no longer supported by upstream firmware, and it is not effectively supported in Linux due to lack of testing. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> [mpe: Remove arch_make_huge_pte() entirely] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-12mei: fix ssize_t to int assignment in read and write ops.Tomas Winkler
Use ssize_t for rets variables in mei_write(), mei_read(), and mei_cl_write() as well as change the return type of mei_cl_write() to ssize_t, to prevent assignment of possible 64bit size_t to int 32 bit variable. As by product also eliminate warning drivers/misc/mei/client.c:1702:11: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-12mei: use correct type for counter variable in for loopsTomas Winkler
In for loops use same type for counter variable as has the limiting variable. drivers/misc/mei/bus-fixup.c:489:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] drivers/misc/mei/hw-txe.c:725:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] drivers/misc/mei/hw-txe.c:744:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-12mei: check for error returned from mei_hbuf_empty_slots()Tomas Winkler
mei_hbuf_empty_slots() may return with an error in case of circular buffer overflow. This type of error may be caused only by a bug. However currently, the error won't be detected due signed type promotion in comparison to u32. We add explicit check for less then zero and explicit cast in comparison to suppress singn-compare warning. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-12cxl_getfile(): switch to alloc_file_pseudo()Al Viro
Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-12alloc_file(): switch to passing O_... flags instead of FMODE_... modeAl Viro
... so that it could set both ->f_flags and ->f_mode, without callers having to set ->f_flags manually. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-12mei: don't update offset in writeAlexander Usyskin
MEI enables writes of complete messages only while read can be performed in parts, hence write should not update the file offset to not break interleaving partial reads with writes. Cc: <stable@vger.kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-12mei: bus: type promotion bug in mei_fwver()Tomas Winkler
if __mei_cl_recv() returns a negative then "bytes_recv" type is promoted to a high positive value in comparison with size_t evaluated by MKHI_FWVER_LEN(1). It results in error condition not to be detected. Cc: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 9078ad92ef86 ("mei: expose fw version to sysfs") Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-12mei: bus: type promotion bug in mei_nfc_if_version()Dan Carpenter
We accidentally removed the check for negative returns without considering the issue of type promotion. The "if_version_length" variable is type size_t so if __mei_cl_recv() returns a negative then "bytes_recv" is type promoted to a high positive value and treated as success. Cc: <stable@vger.kernel.org> Fixes: 582ab27a063a ("mei: bus: fix received data size check in NFC fixup") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-10cxl_getfile(): fix double-iput() on alloc_file() failuresAl Viro
Doing iput() after path_put() is wrong. Cc: stable@vger.kernel.org Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-07misc: ti-st: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07tsl2550: fix lux1_input error in low lightMatt Ranostay
ADC channel 0 photodiode detects both infrared + visible light, but ADC channel 1 just detects infrared. However, the latter is a bit more sensitive in that range so complete darkness or low light causes a error condition in which the chan0 - chan1 is negative that results in a -EAGAIN. This patch changes the resulting lux1_input sysfs attribute message from "Resource temporarily unavailable" to a user-grokable lux value of 0. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07misc: mic: fix passing the current timeArnd Bergmann
I noticed that the mic driver passes a 'struct timespec64' as part of a message into an attached device, where it is used to set the current system time. This won't actually work if one of the two sides runs a 32-bit kernel and the other runs a 64-bit kernel, since the structure layout is different between the two. I found this while replacing calls to the deprecated do_settimeofday64() interface with the modern ktime_get_real_ts() variant, but it seems appropriate to address both at the same time here. To make sure we have a sane structure, let's define our own structure using the layout of the 64-bit kernel. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07misc: mic: mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07sgi-xp: xpc_partition: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07eeprom: at25: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07misc: ibmvmc: Use GFP_ATOMIC under spin lockWei Yongjun
The function alloc_dma_buffer() is called from ibmvmc_add_buffer(), in which a spin lock be held here, so we should use GFP_ATOMIC when a lock is held. Fixes: 0eca353e7ae7 ("misc: IBM Virtual Management Channel Driver (VMC)") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07vmci: type promotion bug in qp_host_get_user_memory()Dan Carpenter
The problem is that if get_user_pages_fast() fails and returns a negative error code, it gets type promoted to a high positive value and treated as a success. Fixes: 06164d2b72aa ("VMCI: queue pairs implementation.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07ibmasm: don't write out of bounds in read handlerJann Horn
This read handler had a lot of custom logic and wrote outside the bounds of the provided buffer. This could lead to kernel and userspace memory corruption. Just use simple_read_from_buffer() with a stack buffer. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-06misc: sram: enable clock before registering regionsJohan Hovold
Make sure to enable the clock before registering regions and exporting partitions to user space at which point we must be prepared for I/O. Fixes: ee895ccdf776 ("misc: sram: fix enabled clock leak on error path") Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-06misc: sram: fix resource leaks in probe error pathJohan Hovold
Make sure to disable clocks and deregister any exported partitions before returning on late probe errors. Note that since commit ee895ccdf776 ("misc: sram: fix enabled clock leak on error path"), partitions are deliberately exported before enabling the clock so we stick to that logic here. A follow up patch will address this. Fixes: 2ae2e28852f2 ("misc: sram: add Atmel securam support") Cc: stable <stable@vger.kernel.org> # 4.9 Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03mei: discard messages from not connected client during power down.Alexander Usyskin
This fixes regression introduced by commit 8d52af6795c0 ("mei: speed up the power down flow") In power down or suspend flow a message can still be received from the FW because the clients fake disconnection. In normal case we interpret messages w/o destination as corrupted and link reset is performed in order to clean the channel, but during power down link reset is already in progress resulting in endless loop. To resolve the issue under power down flow we discard messages silently. Cc: <stable@vger.kernel.org> 4.16+ Fixes: 8d52af6795c0 ("mei: speed up the power down flow") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199541 Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03mei: expose fw version to sysfsAlexander Usyskin
The ME FW version is constantly used by detection and update tools. To improve the reliability and simplify these tools provide a sysfs interface to access version of the platform ME firmware in the following format: <platform>:<major>.<minor>.<milestone>.<build>. There can be up to three such blocks for different FW components. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03mei: add optional timeout to internal bus recvAlexander Usyskin
Add optional timeout to internal bus recv function to enable break out of internal flows in case of no answer from FW. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03mei: remove unused MEI_IAMTHIF_STALL_TIMER defineAlexander Usyskin
MEI_IAMTHIF_STALL_TIMER is unused now and can be safely removed. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03eeprom: idt_89hpesx: remove redundant variable csrval_lenColin Ian King
Variable csrval_len is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'csrval_len' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03misc: rtsx: make several functions staticColin Ian King
Several helper functions are local to the source and do not need to be in global scope, so make them static. Cleans up sparse warnings: symbol 'rtsx_pm_power_saving' was not declared. Should it be static? symbol 'rtsx_set_l1off_sub_cfg_d0' was not declared. Should it be static? symbol 'rtsx_pm_full_on' was not declared. Should it be static? symbol 'rtsx_comm_set_ltr_latency' was not declared. Should it be static? symbol 'rtsx_pci_process_ocp' was not declared. Should it be static? symbol 'rtsx_pci_process_ocp_interrupt' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03misc: vmci: remove redundant variable is_localColin Ian King
Variable is_local is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'is_local' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03misc: ti-st: remove redundant variable 'type'Colin Ian King
Variable type is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'type' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03sgi-xp: remove redundant pointers ch and rpColin Ian King
The pointers ch and rp are set but are never used hence they are redundant and can be removed. Cleans up clang warnings: warning: variable 'ch' set but not used [-Wunused-but-set-variable] warning: variable 'rp' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-14 14:57:12 +0000