| Age | Commit message (Collapse) | Author |
|---|
|
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it, simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Axe Yang <axe.yang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240307114348.3643034-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This commit disables PM runtime in dwcmshc_remove() to avoid the
error message below when reloading the sdhci-of-dwcmshc.ko
sdhci-dwcmshc MLNXBF30:00: Unbalanced pm_runtime_enable!
Fixes: 48fe8fadbe5e ("mmc: sdhci-of-dwcmshc: Add runtime PM operations")
Reviewed-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Liming Sun <limings@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/b9155963ffb12d18375002bf9ac9a3f98b727fc8.1710854108.git.limings@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
HS200 mode
"PM runtime functions" was been added in sdhci-omap driver in commit
f433e8aac6b9 ("mmc: sdhci-omap: Implement PM runtime functions") along
with "card power off and enable aggressive PM" in commit 3edf588e7fe0
("mmc: sdhci-omap: Allow SDIO card power off and enable aggressive PM").
Since then, the sdhci-omap driver doesn't work using mmc-hs200 mode
due to the tuning values being lost during a pm transition.
As for the sdhci_am654 driver, request a new tuning sequence before
suspend (sdhci_omap_runtime_suspend()), otherwise the device will
trigger cache flush error:
mmc1: cache flush error -110 (ETIMEDOUT)
mmc1: error -110 doing aggressive suspend
followed by I/O errors produced by fdisk -l /dev/mmcblk1boot1:
I/O error, dev mmcblk1boot0, sector 64384 op 0x0:(READ) flags 0x80700 phys_seg 1
prio class 2
I/O error, dev mmcblk1boot1, sector 64384 op 0x0:(READ) flags 0x80700 phys_seg 1
prio class 2
I/O error, dev mmcblk1boot1, sector 64384 op 0x0:(READ) flags 0x0 phys_seg 1
prio class 2
Buffer I/O error on dev mmcblk1boot1, logical block 8048, async page read
I/O error, dev mmcblk1boot0, sector 64384 op 0x0:(READ) flags 0x0 phys_seg 1
prio class 2
Buffer I/O error on dev mmcblk1boot0, logical block 8048, async page read
Don't re-tune if auto retuning is supported in HW (when SDHCI_TUNING_MODE_3
is available).
Link: https://lore.kernel.org/all/2e5f1997-564c-44e4-b357-6343e0dae7ab@smile.fr
Fixes: f433e8aac6b9 ("mmc: sdhci-omap: Implement PM runtime functions")
Signed-off-by: Romain Naour <romain.naour@skf.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240315234444.816978-1-romain.naour@smile.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This release sees some exciting changes from David Lechner which
implements some optimisations that have been talked about for a long
time which allows client drivers to pre-prepare SPI messages for
repeated or low latency use. This lets us move work out of latency
sensitive paths and avoid repeating work for frequently performed
operations. As well as being useful in itself this will also be used
in future to allow controllers to directly trigger SPI operations (eg,
from interrupts).
Otherwise this release has mostly been focused on cleanups, plus a
couple of new devices:
- Support for pre-optimising messages
- A big set of updates from Uwe Kleine-König moving drivers to use
APIs with more modern terminology for controllers
- Major overhaul of the s3c64xx driver
- Support for Google GS101 and Samsung Exynos850"
* tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (122 commits)
spi: Introduce SPI_INVALID_CS and is_valid_cs()
spi: Fix types of the last chip select storage variables
spi: Consistently use BIT for cs_index_mask
spi: Exctract spi_dev_check_cs() helper
spi: Exctract spi_set_all_cs_unused() helper
spi: s3c64xx: switch exynos850 to new port config data
spi: s3c64xx: switch gs101 to new port config data
spi: s3c64xx: deprecate fifo_lvl_mask, rx_lvl_offset and port_id
spi: s3c64xx: get rid of the OF alias ID dependency
spi: s3c64xx: introduce s3c64xx_spi_set_port_id()
spi: s3c64xx: let the SPI core determine the bus number
spi: s3c64xx: allow FIFO depth to be determined from the compatible
spi: s3c64xx: retrieve the FIFO depth from the device tree
spi: s3c64xx: determine the fifo depth only once
spi: s3c64xx: allow full FIFO masks
spi: s3c64xx: define a magic value
spi: dt-bindings: introduce FIFO depth properties
spi: axi-spi-engine: use struct_size() macro
spi: axi-spi-engine: use __counted_by() attribute
spi: axi-spi-engine: remove p from struct spi_engine_message_state
...
|
|
Commit e519f0bb64ef ("ARM/mmc: Convert old mmci-omap to GPIO descriptors")
moved Nokia N810 MMC power up/down from the board file into the MMC driver.
The change removed some delays, and ordering without a valid reason.
Restore power up/down to match the original code. This matters only on N810
where the 2nd GPIO is in use. Other boards will see an additional delay but
that should be a lesser concern than omitting delays altogether.
Fixes: e519f0bb64ef ("ARM/mmc: Convert old mmci-omap to GPIO descriptors")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Message-ID: <20240223181439.1099750-6-aaro.koskinen@iki.fi>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
After a deferred probe, GPIO descriptor lookup will fail with EBUSY. Fix by
using managed descriptors.
Fixes: e519f0bb64ef ("ARM/mmc: Convert old mmci-omap to GPIO descriptors")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Message-ID: <20240223181439.1099750-5-aaro.koskinen@iki.fi>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The lookup is done before host->dev is initialized. It will always just
fail silently, and the MMC behaviour is totally unpredictable as the switch
is left in an undefined state. Fix that.
Fixes: e519f0bb64ef ("ARM/mmc: Convert old mmci-omap to GPIO descriptors")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Message-ID: <20240223181439.1099750-4-aaro.koskinen@iki.fi>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
It is not super obvious why the driver sometimes uses an ERR_PTR for the
current mrq. Explain why in comments.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240305105623.3379-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Since driver doesn't handle any DMA requests, drop any use of DMA bits,
such as DMA direction. Instead, use MMC_DATA_WRITE flag directly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240304184830.1319526-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it, simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240304175606.1200076-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add support for Hi3798MV200 specific extension.
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Link: https://lore.kernel.org/r/20240229-b4-mmc-hi3798mv200-v7-5-10c03f316285@outlook.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The alias is not used and should be removed.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Link: https://lore.kernel.org/r/20240229-b4-mmc-hi3798mv200-v7-2-10c03f316285@outlook.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Parsing dt usually happens very early, sometimes even before the struct
mmc_host has been allocated (e.g. dw_mci_probe() and dw_mci_parse_dt() in
dw_mmc.c). Looking at the source of mmc_of_parse_clk_phase(), it's actually
not needed to have an initialized mmc_host, let's therefore pass a struct
device* to it instead.
Also update the only current user, sdhci-of-aspeed.
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Link: https://lore.kernel.org/r/20240229-b4-mmc-hi3798mv200-v7-1-10c03f316285@outlook.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
function
This looks strange to call release_mem_region() in a remove function
without any request_mem_region() in the probe or "struct resource"
somewhere.
So remove the corresponding code.
Fixes: 3a96dff0f828 ("mmc: SD/MMC Host Controller for Wondermedia WM8505/WM8650")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/bb0bb1ed1e18de55e8c0547625bde271e64b8c31.1708983064.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Merge the mmc fixes for v6.8-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.9.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
With the to-be-fixed commit, the reset_work handler cleared 'host->mrq'
outside of the spinlock protected critical section. That leaves a small
race window during execution of 'tmio_mmc_reset()' where the done_work
handler could grab a pointer to the now invalid 'host->mrq'. Both would
use it to call mmc_request_done() causing problems (see link below).
However, 'host->mrq' cannot simply be cleared earlier inside the
critical section. That would allow new mrqs to come in asynchronously
while the actual reset of the controller still needs to be done. So,
like 'tmio_mmc_set_ios()', an ERR_PTR is used to prevent new mrqs from
coming in but still avoiding concurrency between work handlers.
Reported-by: Dirk Behme <dirk.behme@de.bosch.com>
Closes: https://lore.kernel.org/all/20240220061356.3001761-1-dirk.behme@de.bosch.com/
Fixes: df3ef2d3c92c ("mmc: protect the tmio_mmc driver against a theoretical race")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Reviewed-by: Dirk Behme <dirk.behme@de.bosch.com>
Cc: stable@vger.kernel.org # 3.0+
Link: https://lore.kernel.org/r/20240305104423.3177-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Merge the mmc fixes for v6.8-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.9.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
AC5X spec says PHY init complete bit must be polled until zero.
We see cases in which timeout can take longer than the standard
calculation on AC5X, which is expected following the spec comment above.
According to the spec, we must wait as long as it takes for that bit to
toggle on AC5X.
Cap that with 100 delay loops so we won't get stuck forever.
Fixes: 06c8b667ff5b ("mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Elad Nachman <enachman@marvell.com>
Link: https://lore.kernel.org/r/20240222191714.1216470-3-enachman@marvell.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Each time SD/mmc phy is initialized, at times, in some of
the attempts, phy fails to completes its initialization
which results into timeout error. Per the HW spec, it is
a pre-requisite to ensure a stable SD clock before a phy
initialization is attempted.
Fixes: 06c8b667ff5b ("mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Elad Nachman <enachman@marvell.com>
Link: https://lore.kernel.org/r/20240222200930.1277665-1-enachman@marvell.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The introduction of sg_miter was a bit sloppy as it didn't
exactly mimic the semantics of the old code on multiblock reads
and writes: these like you to:
- Advance to the first sglist entry *before* starting to read
any blocks from the card.
- Advance and check availability of the next entry *right after*
processing one block.
Not checking if we have more sglist entries right after
reading a block will lead to this not being checked until we
return to the callback to read out more blocks, i.e. until the
next interrupt arrives. Since the last block is the last one
(no more data will arrive) there will not be a next interrupt,
and we will be waiting forever resulting in a timeout for
command 18 when reading multiple blocks.
The same bug was fixed also in the writing of multiple blocks.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 27b57277d9ba ("mmc: sh_mmcif: Use sg_miter for PIO")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240221-fix-sh-mmcif-v2-2-5e521eb25ae4@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
All the sglist iterations happen in the *threaded* interrupt handler and
that context is not atomic, so don't request an atomic sglist miter. Using
an atomic miter results in "BUG: scheduling while atomic" splats.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 27b57277d9ba ("mmc: sh_mmcif: Use sg_miter for PIO")
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240221-fix-sh-mmcif-v2-1-5e521eb25ae4@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The sg_miter used to loop over the returned sglist from a
transfer in the esdhc subdriver for SDHCI can be called
from atomic context so the miter needs to be atomic.
sdhci_request_done() is always called from process context,
either as a work or as part of the threaded interrupt handler,
but the one case when we are actually calling .request_done()
from an atomic context is in sdhci_irq().
Fix this by flagging the miter atomic so we always use
kmap_atomic().
Fixes: e8a167b84886 ("mmc: sdhci-esdhc-mcf: Use sg_miter for swapping")
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240228-fix-sdhci-esdhc-mcf-2-v2-1-4ebb3fd691ea@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add support for the mmc controller in the Sophgo CV1800B and SG2002
with corresponding new compatible strings. Implement custom sdhci_ops.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20240217144202.3808-3-jszhang@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Commit 32f18e596141 ("mmc: improve API to make clear hw_reset callback
is for cards") made it clear that the hw_reset callback is intended for
resetting the card. Remove the .card_hw_reset callback from the
meson-mx-sdhc-mmc driver because it's purpose is to reset the SDHC
controller (FIFOs, PHY, DMA interface, ...).
While here also rename and change the argument of meson_mx_sdhc_hw_reset
so it cannot be called by accident as a replacement for card_hw_reset in
the future.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20240217100200.1494980-3-martin.blumenstingl@googlemail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Now that devm_clk_hw_get_clk() has been available for a while we can
resolve an older TODO where this API did not exist yet. No functional
changes intended.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20240217100200.1494980-2-martin.blumenstingl@googlemail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The sg_miter conversion left a dangling unused variable.
Drop it.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402142042.vg0lnLdb-lkp@intel.com/
Fixes: ed01d210fd91 ("mmc: davinci_mmc: Use sg_miter for PIO")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240215-mmc-fix-davinci-v1-1-a593678ca7bf@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Merge the mmc fixes for v6.8-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.9.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Turning on CONFIG_DMA_API_DEBUG_SG results in the following warning:
DMA-API: mmci-pl18x 48220000.mmc: cacheline tracking EEXIST,
overlapping mappings aren't supported
WARNING: CPU: 1 PID: 51 at kernel/dma/debug.c:568
add_dma_entry+0x234/0x2f4
Modules linked in:
CPU: 1 PID: 51 Comm: kworker/1:2 Not tainted 6.1.28 #1
Hardware name: STMicroelectronics STM32MP257F-EV1 Evaluation Board (DT)
Workqueue: events_freezable mmc_rescan
Call trace:
add_dma_entry+0x234/0x2f4
debug_dma_map_sg+0x198/0x350
__dma_map_sg_attrs+0xa0/0x110
dma_map_sg_attrs+0x10/0x2c
sdmmc_idma_prep_data+0x80/0xc0
mmci_prep_data+0x38/0x84
mmci_start_data+0x108/0x2dc
mmci_request+0xe4/0x190
__mmc_start_request+0x68/0x140
mmc_start_request+0x94/0xc0
mmc_wait_for_req+0x70/0x100
mmc_send_tuning+0x108/0x1ac
sdmmc_execute_tuning+0x14c/0x210
mmc_execute_tuning+0x48/0xec
mmc_sd_init_uhs_card.part.0+0x208/0x464
mmc_sd_init_card+0x318/0x89c
mmc_attach_sd+0xe4/0x180
mmc_rescan+0x244/0x320
DMA API debug brings to light leaking dma-mappings as dma_map_sg and
dma_unmap_sg are not correctly balanced.
If an error occurs in mmci_cmd_irq function, only mmci_dma_error
function is called and as this API is not managed on stm32 variant,
dma_unmap_sg is never called in this error path.
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Fixes: 46b723dd867d ("mmc: mmci: add stm32 sdmmc variant")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240207143951.938144-1-christophe.kerello@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use existing typedef for dma_filter_fn to avoid duplicating type
definition.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240208202137.630281-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The variable id is being initialized with a value that is never
read, it is being re-assigned later on. The initialization is
redundant and can be removed.
Cleans up clang scan build warning:
drivers/mmc/host/wbsd.c:1287:4: warning: Value stored to 'id'
is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240205191310.1848561-1-colin.i.king@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use sg_miter iterator instead of sg_virt() and custom code
to loop over the scatterlist. The memory iterator will do
bounce buffering if the page happens to be located in high memory,
which the driver may or may not be using.
Suggested-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-mmc/20240122073423.GA25859@lst.de/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240127-mmc-proper-kmap-v2-9-d8e732aa97d1@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use sg_miter iterator instead of sg_virt() and custom code
to loop over the scatterlist. The memory iterator will do
bounce buffering if the page happens to be located in high memory,
which the driver may or may not be using.
Suggested-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-mmc/20240122073423.GA25859@lst.de/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240127-mmc-proper-kmap-v2-8-d8e732aa97d1@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use the scatterlist memory iterator instead of just
dereferencing virtual memory using sg_virt().
This make highmem references work properly.
Suggested-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-mmc/20240122073423.GA25859@lst.de/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240127-mmc-proper-kmap-v2-7-d8e732aa97d1@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use the scatterlist memory iterator instead of just
dereferencing virtual memory using sg_virt().
This make highmem references work properly.
Since this driver is using a worker, no atomic trickery
is needed.
Suggested-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-mmc/20240122073423.GA25859@lst.de/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240127-mmc-proper-kmap-v2-6-d8e732aa97d1@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use the scatterlist memory iterator instead of just
dereferencing virtual memory using sg_virt().
This make highmem references work properly.
This driver also has a bug in the PIO sglist handling that
is fixed as part of the patch: it does not travers the
list of scatterbuffers: it will just process the first
item in the list. This is fixed by augmenting the logic
such that we do not process more than one sgitem
per IRQ instead of counting down potentially the whole
length of the request.
We can suspect that the PIO path is quite untested.
Suggested-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-mmc/20240122073423.GA25859@lst.de/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240127-mmc-proper-kmap-v2-5-d8e732aa97d1@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use the scatterlist memory iterator instead of just
dereferencing virtual memory using sg_virt().
This make highmem references work properly.
Suggested-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-mmc/20240122073423.GA25859@lst.de/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240127-mmc-proper-kmap-v2-4-d8e732aa97d1@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The whole scatterlist chain is submitted to the DMA engine,
but the code is written to just account for the length of
the first sg entry.
When the DMA transfer is finished, all the data in the
request has been transferred, account for this instead.
This only works because the moxart_request() function isn't
checking that all data was transferred and will
unconditionally issue mmc_request_done() after returning
successfully from moxart_transfer_dma().
Keep the assignment of accounted bytes in .bytes_xfered
but move it after the completion where we know it has
actually happened.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240127-mmc-proper-kmap-v2-3-d8e732aa97d1@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The same code is in two places and we will add a third place.
Break this out into its own function.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240127-mmc-proper-kmap-v2-2-d8e732aa97d1@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use the scatterlist memory iterator instead of just
dereferencing virtual memory using sg_virt().
This make highmem references work properly.
Suggested-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-mmc/20240122073423.GA25859@lst.de/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240127-mmc-proper-kmap-v2-1-d8e732aa97d1@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.
To be able to remove these compatibility macros push the renaming into
this driver.
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/a9c95759cf77a19c160d1d497c76ac5770c67684.1707324794.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
by BIOS
Driver shall switch clock source from DLL clock to
OPE clock when power off card to ensure that card
can be identified with OPE clock by BIOS.
Signed-off-by: Fred Ai <fred.ai@bayhubtech.com>
Fixes:4be33cf18703 ("mmc: sdhci-pci-o2micro: Improve card input timing at SDR104/HS200 mode")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240203102908.4683-1-fredaibayhubtech@126.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem changes
for 6.8-rc1.
Other than lots of binder driver changes (as you can see by the merge
conflicts) included in here are:
- lots of iio driver updates and additions
- spmi driver updates
- eeprom driver updates
- firmware driver updates
- ocxl driver updates
- mhi driver updates
- w1 driver updates
- nvmem driver updates
- coresight driver updates
- platform driver remove callback api changes
- tags.sh script updates
- bus_type constant marking cleanups
- lots of other small driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits)
android: removed duplicate linux/errno
uio: Fix use-after-free in uio_open
drivers: soc: xilinx: add check for platform
firmware: xilinx: Export function to use in other module
scripts/tags.sh: remove find_sources
scripts/tags.sh: use -n to test archinclude
scripts/tags.sh: add local annotation
scripts/tags.sh: use more portable -path instead of -wholename
scripts/tags.sh: Update comment (addition of gtags)
firmware: zynqmp: Convert to platform remove callback returning void
firmware: turris-mox-rwtm: Convert to platform remove callback returning void
firmware: stratix10-svc: Convert to platform remove callback returning void
firmware: stratix10-rsu: Convert to platform remove callback returning void
firmware: raspberrypi: Convert to platform remove callback returning void
firmware: qemu_fw_cfg: Convert to platform remove callback returning void
firmware: mtk-adsp-ipc: Convert to platform remove callback returning void
firmware: imx-dsp: Convert to platform remove callback returning void
firmware: coreboot_table: Convert to platform remove callback returning void
firmware: arm_scpi: Convert to platform remove callback returning void
firmware: arm_scmi: Convert to platform remove callback returning void
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Don't force a retune before eMMC RPMB switch
- Add optional HS400 tuning in HS400es initialization
- Add a sysfs node to for write-protect-group-size
- Add re-tuning test to the mmc-test module
- Use mrq.sbc to support close-ended ioctl requests
MMC host:
- mmci: Add support for SDIO in-band irqs for the stm32 variant
- mmc_spi: Remove broken support custom DMA mapped buffers
- mtk-sd: Improve and extend the support for tunings
- renesas_sdhi: Document support for the RZ/Five variant
- sdhci_am654: Drop support for the ti,otap-del-sel DT property
- sdhci-brcmstb: Add support for the brcm 74165b0 variant
- sdhci-msm: Add compatibles for IPQ4019 and IPQ8074
- sdhci-of-dwcmshc: Add support for the T-Head TH1520 variant
- sdhci-xenon: Add support for the Marvell ac5 variant"
* tag 'mmc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (27 commits)
mmc: xenon: Add ac5 support via bounce buffer
dt-bindings: mmc: add Marvell ac5
mmc: sdhci-brcmstb: add new sdhci reset sequence for brcm 74165b0
dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 74165b0
mmc: core: Do not force a retune before RPMB switch
mmc: core: Add HS400 tuning in HS400es initialization
mmc: sdhci_omap: Fix TI SoC dependencies
mmc: sdhci_am654: Fix TI SoC dependencies
mmc: core: Add wp_grp_size sysfs node
mmc: mmc_test: Add re-tuning test
mmc: mmc_spi: remove custom DMA mapped buffers
dt-bindings: mmc: sdhci-msm: document dedicated IPQ4019 and IPQ8074
dt-bindings: mmc: synopsys-dw-mshc: add iommus for Intel SocFPGA
mmc: mtk-sd: Extend number of tuning steps
dt-bindings: mmc: mtk-sd: add tuning steps related property
mmc: sdhci-omap: don't misuse kernel-doc marker
mmc: mtk-sd: Increase the verbosity of msdc_track_cmd_data
mmc: core: Use mrq.sbc in close-ended ffu
mmc: sdhci_am654: Drop lookup for deprecated ti,otap-del-sel
mmc: sdhci-of-dwcmshc: Use logical OR instead of bitwise OR in dwcmshc_probe()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A moderately busy release for SPI, the main core update was the
merging of support for multiple chip selects, used in some flash
configurations. There were also big overhauls for the AXI SPI Engine
and PL022 drivers, plus some new device support for ST.
There's a few patches for other trees, API updates to allow the
multiple chip select support and one of the naming modernisations
touched a controller embedded in the USB code.
- Support for multiple chip selects.
- A big overhaul for the AXI SPI engine driver, modernising it and
adding a bunch of new features.
- Modernisation of the PL022 driver, fixing some issues with
submitting messages while in atomic context in the process.
- Many drivers were converted to use new APIs which avoid outdated
terminology for devices and controllers.
- Support for ST Microelectronics STM32F7 and STM32MP25, and Renesas
RZ/Five"
* tag 'spi-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (83 commits)
spi: stm32: add st,stm32mp25-spi compatible supporting STM32MP25 soc
dt-bindings: spi: stm32: add st,stm32mp25-spi compatible
spi: stm32: use dma_get_slave_caps prior to configuring dma channel
spi: axi-spi-engine: fix struct member doc warnings
spi: pl022: update description of internal_cs_control()
spi: pl022: delete description of cur_msg
spi: dw: Remove Intel Thunder Bay SOC support
spi: dw: Remove Intel Thunder Bay SOC support
spi: sh-msiof: Enforce fixed DTDL for R-Car H3
spi: ljca: switch to use devm_spi_alloc_host()
spi: cs42l43: switch to use devm_spi_alloc_host()
spi: zynqmp-gqspi: switch to use modern name
spi: zynq-qspi: switch to use modern name
spi: xtensa-xtfpga: switch to use modern name
spi: xlp: switch to use modern name
spi: xilinx: switch to use modern name
spi: xcomm: switch to use modern name
spi: uniphier: switch to use modern name
spi: topcliff-pch: switch to use modern name
spi: wpcm-fiu: switch to use devm_spi_alloc_host()
...
|
|
AC5/X/IM SOCs has a variant of the Xenon eMMC controller,
in which only 31-bit of addressing pass from the controller
on the AXI bus.
Since we cannot guarantee that only buffers from the first 2GB
of memory will reach the driver, the driver is configured for
SDMA mode, without 64-bit mode, overriding the DMA mask to 34-bit
to support the DDR memory mapping, which starts at offset 8GB.
Signed-off-by: Elad Nachman <enachman@marvell.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240104173033.2836110-1-enachman@marvell.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
74165b0 shall use a new sdio controller core version which
requires a different reset sequence. For core reset we use
sdhci_reset. For CMD and/or DATA reset added a new function
to also enable SDHCI clocks SDHCI_CLOCK_CARD_EN
SDHCI_CLOCK_INT_EN along with the SDHCI_RESET_CMD and/or
SDHCI_RESET_DATA fields.
Signed-off-by: Kamal Dasu <kdasu@broadcom.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240103222338.31447-3-kamal.dasu@broadcom.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Merge the mmc fixes for v6.7-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.8.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Some eMMC devices that do not close the auto clk gate after hw reset will
cause eMMC initialization to fail. Let's fix this.
Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Fixes: ff874dbc4f86 ("mmc: sdhci-sprd: Disable CLK_AUTO when the clock is less than 400K")
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231204064934.21236-1-wenchao.chen@unisoc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The sdhci_omap is specific to older TI SoCs, update the
dependencies for those SoCs and compile testing. While we're
at it update the text to reflect the wider range of
supported TI SoCS the driver now supports.
Fixes: 7d326930d352 ("mmc: sdhci-omap: Add OMAP SDHCI driver")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20231220135950.433588-2-pbrobinson@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The sdhci_am654 is specific to recent TI SoCs, update the
dependencies for those SoCs and compile testing. While we're
at it update the text to reflect the wider range of
supported TI SoCS the driver now supports.
Fixes: 41fd4caeb00b ("mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20231220135950.433588-1-pbrobinson@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
