summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2020-01-23net/sonic: Avoid needless receive descriptor EOL flag updatesFinn Thain
The while loop in sonic_rx() traverses the rx descriptor ring. It stops when it reaches a descriptor that the SONIC has not used. Each iteration advances the EOL flag so the SONIC can keep using more descriptors. Therefore, the while loop has no definite termination condition. The algorithm described in the National Semiconductor literature is quite different. It consumes descriptors up to the one with its EOL flag set (which will also have its "in use" flag set). All freed descriptors are then returned to the ring at once, by adjusting the EOL flags (and link pointers). Adopt the algorithm from datasheet as it's simpler, terminates quickly and avoids a lot of pointless descriptor EOL flag changes. Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23net/sonic: Fix receive buffer handlingFinn Thain
The SONIC can sometimes advance its rx buffer pointer (RRP register) without advancing its rx descriptor pointer (CRDA register). As a result the index of the current rx descriptor may not equal that of the current rx buffer. The driver mistakenly assumes that they are always equal. This assumption leads to incorrect packet lengths and possible packet duplication. Avoid this by calling a new function to locate the buffer corresponding to a given descriptor. Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23net/sonic: Fix interface error stats collectionFinn Thain
The tx_aborted_errors statistic should count packets flagged with EXD, EXC, FU, or BCM bits because those bits denote an aborted transmission. That corresponds to the bitmask 0x0446, not 0x0642. Use macros for these constants to avoid mistakes. Better to leave out FIFO Underruns (FU) as there's a separate counter for that purpose. Don't lump all these errors in with the general tx_errors counter as that's used for tx timeout events. On the rx side, don't count RDE and RBAE interrupts as dropped packets. These interrupts don't indicate a lost packet, just a lack of resources. When a lack of resources results in a lost packet, this gets reported in the rx_missed_errors counter (along with RFO events). Don't double-count rx_frame_errors and rx_crc_errors. Don't use the general rx_errors counter for events that already have special counters. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23net/sonic: Use MMIO accessorsFinn Thain
The driver accesses descriptor memory which is simultaneously accessed by the chip, so the compiler must not be allowed to re-order CPU accesses. sonic_buf_get() used 'volatile' to prevent that. sonic_buf_put() should have done so too but was overlooked. Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23net/sonic: Clear interrupt flags immediatelyFinn Thain
The chip can change a packet's descriptor status flags at any time. However, an active interrupt flag gets cleared rather late. This allows a race condition that could theoretically lose an interrupt. Fix this by clearing asserted interrupt flags immediately. Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23net/sonic: Add mutual exclusion for accessing shared stateFinn Thain
The netif_stop_queue() call in sonic_send_packet() races with the netif_wake_queue() call in sonic_interrupt(). This causes issues like "NETDEV WATCHDOG: eth0 (macsonic): transmit queue 0 timed out". Fix this by disabling interrupts when accessing tx_skb[] and next_tx. Update a comment to clarify the synchronization properties. Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23net: fsl/fman: rename IF_MODE_XGMII to IF_MODE_10GMadalin Bucur
As the only 10G PHY interface type defined at the moment the code was developed was XGMII, although the PHY interface mode used was not XGMII, XGMII was used in the code to denote 10G. This patch renames the 10G interface mode to remove the ambiguity. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23net/fsl: treat fsl,erratum-a011043Madalin Bucur
When fsl,erratum-a011043 is set, adjust for erratum A011043: MDIO reads to internal PCS registers may result in having the MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and read data (MDIO_DATA[MDIO_DATA]) is correct. Software may get false read error when reading internal PCS registers through MDIO. As a workaround, all internal MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23qlcnic: Fix CPU soft lockup while collecting firmware dumpManish Chopra
Driver while collecting firmware dump takes longer time to collect/process some of the firmware dump entries/memories. Bigger capture masks makes it worse as it results in larger amount of data being collected and results in CPU soft lockup. Place cond_resched() in some of the driver flows that are expectedly time consuming to relinquish the CPU to avoid CPU soft lockup panic. Signed-off-by: Shahed Shaikh <shshaikh@marvell.com> Tested-by: Yonggen Xu <Yonggen.Xu@dell.com> Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23mlxsw: spectrum_acl: Fix use-after-free during reloadIdo Schimmel
During reload (or module unload), the router block is de-initialized. Among other things, this results in the removal of a default multicast route from each active virtual router (VRF). These default routes are configured during initialization to trap packets to the CPU. In Spectrum-2, unlike Spectrum-1, multicast routes are implemented using ACL rules. Since the router block is de-initialized before the ACL block, it is possible that the ACL rules corresponding to the default routes are deleted while being accessed by the ACL delayed work that queries rules' activity from the device. This can result in a rare use-after-free [1]. Fix this by protecting the rules list accessed by the delayed work with a lock. We cannot use a spinlock as the activity read operation is blocking. [1] [ 123.331662] ================================================================== [ 123.339920] BUG: KASAN: use-after-free in mlxsw_sp_acl_rule_activity_update_work+0x330/0x3b0 [ 123.349381] Read of size 8 at addr ffff8881f3bb4520 by task kworker/0:2/78 [ 123.357080] [ 123.358773] CPU: 0 PID: 78 Comm: kworker/0:2 Not tainted 5.5.0-rc5-custom-33108-gf5df95d3ef41 #2209 [ 123.368898] Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018 [ 123.378456] Workqueue: mlxsw_core mlxsw_sp_acl_rule_activity_update_work [ 123.385970] Call Trace: [ 123.388734] dump_stack+0xc6/0x11e [ 123.392568] print_address_description.constprop.4+0x21/0x340 [ 123.403236] __kasan_report.cold.8+0x76/0xb1 [ 123.414884] kasan_report+0xe/0x20 [ 123.418716] mlxsw_sp_acl_rule_activity_update_work+0x330/0x3b0 [ 123.444034] process_one_work+0xb06/0x19a0 [ 123.453731] worker_thread+0x91/0xe90 [ 123.467348] kthread+0x348/0x410 [ 123.476847] ret_from_fork+0x24/0x30 [ 123.480863] [ 123.482545] Allocated by task 73: [ 123.486273] save_stack+0x19/0x80 [ 123.490000] __kasan_kmalloc.constprop.6+0xc1/0xd0 [ 123.495379] mlxsw_sp_acl_rule_create+0xa7/0x230 [ 123.500566] mlxsw_sp2_mr_tcam_route_create+0xf6/0x3e0 [ 123.506334] mlxsw_sp_mr_tcam_route_create+0x5b4/0x820 [ 123.512102] mlxsw_sp_mr_table_create+0x3b5/0x690 [ 123.517389] mlxsw_sp_vr_get+0x289/0x4d0 [ 123.521797] mlxsw_sp_fib_node_get+0xa2/0x990 [ 123.526692] mlxsw_sp_router_fib4_event_work+0x54c/0x2d60 [ 123.532752] process_one_work+0xb06/0x19a0 [ 123.537352] worker_thread+0x91/0xe90 [ 123.541471] kthread+0x348/0x410 [ 123.545103] ret_from_fork+0x24/0x30 [ 123.549113] [ 123.550795] Freed by task 518: [ 123.554231] save_stack+0x19/0x80 [ 123.557958] __kasan_slab_free+0x125/0x170 [ 123.562556] kfree+0xd7/0x3a0 [ 123.565895] mlxsw_sp_acl_rule_destroy+0x63/0xd0 [ 123.571081] mlxsw_sp2_mr_tcam_route_destroy+0xd5/0x130 [ 123.576946] mlxsw_sp_mr_tcam_route_destroy+0xba/0x260 [ 123.582714] mlxsw_sp_mr_table_destroy+0x1ab/0x290 [ 123.588091] mlxsw_sp_vr_put+0x1db/0x350 [ 123.592496] mlxsw_sp_fib_node_put+0x298/0x4c0 [ 123.597486] mlxsw_sp_vr_fib_flush+0x15b/0x360 [ 123.602476] mlxsw_sp_router_fib_flush+0xba/0x470 [ 123.607756] mlxsw_sp_vrs_fini+0xaa/0x120 [ 123.612260] mlxsw_sp_router_fini+0x137/0x384 [ 123.617152] mlxsw_sp_fini+0x30a/0x4a0 [ 123.621374] mlxsw_core_bus_device_unregister+0x159/0x600 [ 123.627435] mlxsw_devlink_core_bus_device_reload_down+0x7e/0xb0 [ 123.634176] devlink_reload+0xb4/0x380 [ 123.638391] devlink_nl_cmd_reload+0x610/0x700 [ 123.643382] genl_rcv_msg+0x6a8/0xdc0 [ 123.647497] netlink_rcv_skb+0x134/0x3a0 [ 123.651904] genl_rcv+0x29/0x40 [ 123.655436] netlink_unicast+0x4d4/0x700 [ 123.659843] netlink_sendmsg+0x7c0/0xc70 [ 123.664251] __sys_sendto+0x265/0x3c0 [ 123.668367] __x64_sys_sendto+0xe2/0x1b0 [ 123.672773] do_syscall_64+0xa0/0x530 [ 123.676892] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 123.682552] [ 123.684238] The buggy address belongs to the object at ffff8881f3bb4500 [ 123.684238] which belongs to the cache kmalloc-128 of size 128 [ 123.698261] The buggy address is located 32 bytes inside of [ 123.698261] 128-byte region [ffff8881f3bb4500, ffff8881f3bb4580) [ 123.711303] The buggy address belongs to the page: [ 123.716682] page:ffffea0007ceed00 refcount:1 mapcount:0 mapping:ffff888236403500 index:0x0 [ 123.725958] raw: 0200000000000200 dead000000000100 dead000000000122 ffff888236403500 [ 123.734646] raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 [ 123.743315] page dumped because: kasan: bad access detected [ 123.749562] [ 123.751241] Memory state around the buggy address: [ 123.756620] ffff8881f3bb4400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 123.764716] ffff8881f3bb4480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 123.772812] >ffff8881f3bb4500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 123.780904] ^ [ 123.785697] ffff8881f3bb4580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 123.793793] ffff8881f3bb4600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 123.801883] ================================================================== Fixes: cf7221a4f5a5 ("mlxsw: spectrum_router: Add Multicast routing support for Spectrum-2") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23net: convert suitable drivers to use phy_do_ioctl_runningHeiner Kallweit
Convert suitable drivers to use new helper phy_do_ioctl_running. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Timur Tabi <timur@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-22net/mlx5e: Enable all available stats for uplink repsVlad Buslov
Extend stats group array of uplink representor with all stats that are available for PF in legacy mode, besides ipsec and TLS which are not supported. Don't output vport stats for uplink representor because they are already handled by 802_3 group (with different names: {tx|rx}_{bytes|packets}_phy). Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-22net/mlx5e: Create q counters on uplink representorsVlad Buslov
Q counters were disabled for all types of representors to prevent an issue where there is not enough resources to init q counters for 127 representor instances. Enable q counters only for uplink representors to support "rx_out_of_buffer", "rx_if_down_packets" counters in ethtool. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-22net/mlx5e: Convert rep stats to mlx5e_stats_grp-based infraVlad Buslov
In order to support all of the supported stats that are available in legacy mode for switchdev uplink representors, convert rep stats infrastructure to reuse struct mlx5e_stats_grp that is already used when device is in legacy mode. Refactor rep code to use array of mlx5e_stats_grp structures (constructed using macros provided by stats infra) to fill/update stats, instead of fixed hardcoded set of values. This approach allows to easily extend representors with new stats types. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-22net/mlx5e: IPoIB, use separate stats groupsSaeed Mahameed
Don't copy all of the stats groups used for mlx5e ethernet NIC profile, have a separate stats groups for IPoIB with the set of the needed stats only. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-22net/mlx5e: Convert stats groups array to array of group pointersSaeed Mahameed
Convert stats groups array to array of "stats group" pointers to allow sharing and individual selection of groups per profile as illustrated in the next patches. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
2020-01-22net/mlx5e: Declare stats groups via macroSaeed Mahameed
Introduce new macros to declare stats callbacks and groups, for better code reuse and for individual groups selection per profile which will be introduced in next patches. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
2020-01-22net/mlx5e: Profile specific stats groupsSaeed Mahameed
Attach stats groups array to the profiles and make the stats utility functions (get_num, update, fill, fill_strings) generic and use the profile->stats_grps rather the hardcoded NIC stats groups. This will allow future extension to have per profile stats groups. In this patch mlx5e NIC and IPoIB will still share the same stats groups. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
2020-01-22net/mlx5e: Move uplink rep init/cleanup code into own functionsRoi Dayan
Clean up the code and allows to call uplink rep init/cleanup from different location later. To be used later for a new uplink representor mode. Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-22net/mlx5: DR, Allow connecting flow table to a lower/same level tableYevgeny Kliteynik
Allow connecting SW steering source table to a lower/same level destination table. Lifting this limitation is required to support Connection Tracking. Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-22net/mlx5: DR, Modify header copy supportHamdan Igbaria
Modify header supports ADD/SET and from this patch also COPY. Copy allows to copy header fields and metadata. Signed-off-by: Hamdan Igbaria <hamdani@mellanox.com> Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-22net/mlx5: DR, Modify set action limitation extensionHamdan Igbaria
Modify set actions are not supported on both tx and rx, added a check for that. Also refactored the code in a way that every modify action has his own functions, this needed so in the future we could add copy action more smoothly. Signed-off-by: Hamdan Igbaria <hamdani@mellanox.com> Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-22net/mlx5e: Add mlx5e_flower_parse_meta supportwenxu
In the flowtables offload all the devices in the flowtables share the same flow_block. An offload rule will be installed on all the devices. This scenario is not correct. It is no problem if there are only two devices in the flowtable, The rule with ingress and egress on the same device can be reject by driver. But more than two devices in the flowtable will install the wrong rules on hardware. For example: Three devices in a offload flowtables: dev_a, dev_b, dev_c A rule ingress from dev_a and egress to dev_b: The rule will install on device dev_a. The rule will try to install on dev_b but failed for ingress and egress on the same device. The rule will install on dev_c. This is not correct. The flowtables offload avoid this case through restricting the ingress dev with FLOW_DISSECTOR_KEY_META. So the mlx5e driver also should support the FLOW_DISSECTOR_KEY_META parse. Signed-off-by: wenxu <wenxu@ucloud.cn> Acked-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-22net/mlx5: make the symbol 'ESW_POOLS' staticChen Wandun
Fix the following sparse warning: drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_chains.c:35:20: warning: symbol 'ESW_POOLS' was not declared. Should it be static? Fixes: 39ac237ce009 ("net/mlx5: E-Switch, Refactor chains and priorities") Signed-off-by: Chen Wandun <chenwandun@huawei.com> Acked-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-22net/mlx5e: allow TSO on VXLAN over VLAN topologiesDavide Caratti
since mlx5 hardware can segment correctly TSO packets on VXLAN over VLAN topologies, CPU usage can improve significantly if we enable tunnel offloads in dev->vlan_features, like it was done in the past with other NIC drivers (e.g. mlx4, be2net and ixgbe). Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-22net/mlx5e: Fix printk format warningOlof Johansson
Use "%zu" for size_t. Seen on ARM allmodconfig: drivers/net/ethernet/mellanox/mlx5/core/wq.c: In function 'mlx5_wq_cyc_wqe_dump': include/linux/kern_levels.h:5:18: warning: format '%ld' expects argument of type 'long int', but argument 5 has type 'size_t' {aka 'unsigned int'} [-Wformat=] Fixes: 130c7b46c93d ("net/mlx5e: TX, Dump WQs wqe descriptors on CQE with error events") Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-22net: convert additional drivers to use phy_do_ioctlHeiner Kallweit
The first batch of driver conversions missed a few cases where we can use phy_do_ioctl too. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21drivers: net: declance: fix comparing pointer to 0Chen Zhou
Fixes coccicheck warning: ./drivers/net/ethernet/amd/declance.c:611:14-15: WARNING comparing pointer to 0 Replace "skb == 0" with "!skb". Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: cleanup some coding style issueHuazhong Tan
This patch removes some unnecessary return value assignments, some duplicated printing in the caller, refines the judgment of 0 and uses le16_to_cpu to replace __le16_to_cpu. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: remove redundant print on ENOMEMHuazhong Tan
All kmalloc-based functions print enough information on failures. So this patch removes the log in hclge_get_dfx_reg() when returns ENOMEM. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: delete unnecessary blank line and space for cleanupGuangbin Huang
This patch deletes some unnecessary blank lines and spaces to clean up code, and in hclgevf_set_vlan_filter() moves the comment to the front of hclgevf_send_mbx_msg(). Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: rewrite a log in hclge_put_vector()Yonglong Liu
When gets vector fails, hclge_put_vector() should print out the vector instead of vector_id in the log and return the wrong vector_id to its caller. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: refine the input parameter 'size' for snprintf()Guojia Liao
The function snprintf() writes at most size bytes (including the terminating null byte ('\0') to str. Now, We can guarantee that the parameter of size is lager than the length of str to be formatting including its terminating null byte. So it's unnecessary to minus 1 for the input parameter 'size'. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: move duplicated macro definition into headerGuojia Liao
Macro HCLGE_GET_DFX_REG_TYPE_CNT in hclge_dbg_get_dfx_bd_num() and macro HCLGE_DFX_REG_BD_NUM in hclge_get_dfx_reg_bd_num() have the same meaning, so just defines HCLGE_GET_DFX_REG_TYPE_CNT in hclge_main.h. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: set VF's default reset_type to HNAE3_NONE_RESETHuazhong Tan
reset_type means what kind of reset the driver is handling now, so after initializing or reset, the reset_type of VF should be set to HNAE3_NONE_RESET, otherwise, this unknown default value may be a little misleading when the device is running. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: do not reuse pfmemalloc pagesYunsheng Lin
HNS3 driver allocates pages for DMA with dev_alloc_pages(), which calls alloc_pages_node() with the __GFP_MEMALLOC flag. So, in case of OOM condition, HNS3 can get pages with pfmemalloc flag set. So do not reuse the pages with pfmemalloc flag set because those pages are reserved for special cases, such as low memory case. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: limit the error logging in the hns3_clean_tx_ring()Yunsheng Lin
The error log printed by netdev_err() in the hns3_clean_tx_ring() may spam the kernel log. This patch uses hns3_rl_err() to ratelimit the error log in the hns3_clean_tx_ring(). Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: convert suitable network drivers to use phy_do_ioctlHeiner Kallweit
Convert suitable network drivers to use phy_do_ioctl. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: phy: rename phy_do_ioctl to phy_do_ioctl_runningHeiner Kallweit
We just added phy_do_ioctl, but it turned out that we need another version of this function that doesn't check whether net_device is running. So rename phy_do_ioctl to phy_do_ioctl_running. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: replace snprintf with scnprintf in hns3_update_stringsChen Zhou
snprintf returns the number of bytes that would be written, which may be greater than the the actual length to be written. Here use extra code to handle this. scnprintf returns the number of bytes that was actually written, just use scnprintf to simplify the code. Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: replace snprintf with scnprintf in hns3_dbg_cmd_readChen Zhou
The return value of snprintf may be greater than the size of HNS3_DBG_READ_LEN, use scnprintf instead in hns3_dbg_cmd_read. Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20spectrum: Add a delayed work to update SPAN buffsize according to speedJiri Pirko
When PUDE event is handled and the link is up, update the port SPAN buffer size according to the current speed. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20mlxsw: spectrum: Fix SPAN egress mirroring buffer size for Spectrum-2Jiri Pirko
For SPAN egress mirroring buffer size, it is needed to use a different formula for Spectrum and Spectrum-2. Move the buffer size computation to ops and implement new formula for Spectrum-2. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20mlxsw: spectrum_span: Put buffsize update code into helper functionJiri Pirko
Avoid duplication of code that is doing buffsize update and put it into a separate helper function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20mlxsw: spectrum: Push code getting port speed into a helperJiri Pirko
Currently PTP code queries directly PTYS register for port speed from work scheduled upon PUDE event. Since the speed needs to be used for SPAN buffer size computation as well, push the code into a separate helper. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20r8169: use generic ndo_do_ioctl handler phy_do_ioctlHeiner Kallweit
Replace rtl8169_ioctl with new generic function phy_do_ioctl. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20net: stmmac: modified pcs mode support for RGMIIDejin Zheng
snps databook noted that physical coding sublayer (PCS) interface that can be used when the MAC is configured for the TBI, RTBI, or SGMII PHY interface. we have RGMII and SGMII in a SoC and it also has the PCS block. it needs stmmac_init_phy and stmmac_mdio_register function for initializing phy when it used RGMII interface. Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
2020-01-19mlxsw: Add OVERLAY_SMAC_MC trapAmit Cohen
Add a trap for NVE packets that the device decided to drop because their overlay source MAC is multicast. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19mlxsw: Add tunnel devlink-trap supportAmit Cohen
Add the trap IDs and trap group used to report tunnel drops. Register tunnel packet traps and associated tunnel trap group with devlink during driver initialization. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-10 22:51:14 +0000