summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath12k
AgeCommit message (Collapse)Author
2025-02-26wifi: ath12k: Improve BSS discovery with hidden SSID in 6 GHz bandRamasamy Kaliappan
Currently, sometimes, the station is unable to identify the configured AP SSID in its scan results when the AP is not broadcasting its name publicly and has a hidden SSID. Currently, channel dwell time for an ath12k station is 30 ms. Sometimes, station can send broadcast probe request to AP close to the end of dwell time. In some of these cases, before AP sends a response to the received probe request, the dwell time on the station side would come to an end. So, the station will move to scan next channel and will not be able to acknowledge the unicast probe response. Resolve this issue by increasing station's channel dwell time to 70 ms, so that the it remains on the same channel for a longer period. This would increase the station's chance of receiving probe response from the AP. The station will then send a response acknowledgment back to the AP, thus leading to successful scan and BSS discovery. With an increased dwell time, scan would take longer than it takes now. But, this fix is an improvement for hidden SSID scan issue. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250207060005.153835-1-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-24wifi: ath12k: Add NULL check to validate tpc_statsRoopni Devanathan
While processing TPC stats received from firmware, there are chances that the tpc_stats might not be filled and the data is not available. This can happen under two scenarios. First, when firmware sends a non-zero event count before event count 0. When this happens, tpc_stats will be checked for data before memory allocation and the tpc_stats will be unavailable. Second, when memory allocation failed when event count received is 0 and the firmware still sends a non-zero event. When this happens, memory will not be allocated for tpc_stats though event count is 0, so when non-zero event count is received, tpc_stats will be empty. There are checks to validate if tpc_stats variable is filled that are used in two subsequent places, but these are placed after tpc_stats is dereference without checking if it is NULL or has valid data. Fix this by removing the mentioned checks and adding a NULL check after assigning tpc_stats to check if it is valid. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Closes: https://scan7.scan.coverity.com/#/project-view/52668/11354?selectedIssue=1637145 Fixes: f0c3bb78e42f ("wifi: ath12k: Add Support to Parse TPC Event from Firmware") Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250221041250.769491-1-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-24wifi: ath12k: use link specific bss_conf as well in ath12k_mac_vif_cache_flush()Baochen Qiang
Commit 3952657848c0 ("wifi: ath12k: Use mac80211 vif's link_conf instead of bss_conf") aims at, where applicable, replacing all usage of vif's bss_conf with link specific bss_conff, but missed one instance in ath12k_mac_vif_cache_flush(). This results in wrong configurations passed to ath12k_mac_bss_info_changed() when the link in question is not the default link. Change to use the link specific bss_conf to fix this issue. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Fixes: 3952657848c0 ("wifi: ath12k: Use mac80211 vif's link_conf instead of bss_conf") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://patch.msgid.link/20241209024146.3282-1-quic_bqiang@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-20wifi: ath12k: Add missing htt_metadata flag in ath12k_dp_tx()Nicolas Escande
When AP-VLAN support was added, the HTT_TCL_META_DATA_VALID_HTT flag was not added to the tx_info's meta_data_flags. Without this flag the firmware seems to reject all the broadcast (ap-vlan) frames. So add the flag, just as ath11k did it in the downstream QSDK project[1]. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Fixes: 26dd8ccdba4d ("wifi: ath12k: dynamic VLAN support") Signed-off-by: Nicolas Escande <nico.escande@gmail.com> Link: https://git.codelinaro.org/clo/qsdk/oss/system/feeds/wlan-open/-/blob/win.wlan_host_opensource.3.0.r24/patches/ath11k/207-ath11k-Add-support-for-dynamic-vlan.patch # [1] Link: https://patch.msgid.link/20250124113331.93476-1-nico.escande@gmail.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-20wifi: ath12k: remove redundant declaration of ath12k_dp_rx_h_find_peer()P Praneesh
The current code in dp_rx.h declares the ath12k_dp_rx_h_find_peer() twice. Fix this by removing one of the redundant declarations of ath12k_dp_rx_h_find_peer() to ensure that the function is declared only once. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com> Link: https://patch.msgid.link/20250219053640.223734-1-praneesh.p@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-18wifi: ath12k: cleanup ath12k_mac_mlo_ready()Ethan Carter Edwards
There is a possibility for an uninitialized *ret* variable to be returned in some code paths. This explicitly returns 0 without an error. Also removes goto that returned *ret* and simply returns in place. Closes: https://scan5.scan.coverity.com/#/project-view/63541/10063?selectedIssue=1642337 Fixes: b716a10d99a2 ("wifi: ath12k: enable MLO setup and teardown from core") Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250210-ath12k-uninit-v2-1-3596f28dd380@ethancedwards.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Support Received FSE StatsDinesh Karthikeyan
Add support to request received Finite State Entropy stats from firmware through HTT stats type 28. These stats give software and hardware FSE stats such as cache entry count, full cache count, current and peak occupancy count, pending search counts, etc. Sample output: ------------- echo 28 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_STATS_RX_FSE_STATS_TLV: === Software RX FSE STATS === Enable count = 0 Disable count = 0 Cache invalidate entry count = 0 Full cache invalidate count = 0 === Hardware RX FSE STATS === Cache hits count = 0 Cache no. of searches = 0 Cache occupancy peak count: [0] = 0 [1-16] = 0 [17-32] = 0 [33-48] = 0 [49-64] = 0 [65-80] = 0 [81-96] = 0 [97-112] = 0 [113-127] = 0 [128] = 0 Cache occupancy current count: [0] = 0 [1-16] = 0 [17-32] = 0 [33-48] = 0 [49-64] = 0 [65-80] = 0 [81-96] = 0 [97-112] = 0 [113-127] = 0 [128] = 0 Cache search square count: [0] = 0 [1-50] = 0 [51-100] = 0 [101-200] = 0 [201-255] = 0 [256] = 0 Cache search peak pending count: [0] = 0 [1-2] = 0 [3-4] = 0 [Greater/Equal to 5] = 0 Cache search tot pending count: [0] = 0 [1-2] = 0 [3-4] = 0 [Greater/Equal to 5] = 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250204064417.3671928-6-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Support Uplink MUMIMO Trigger StatsRoopni Devanathan
Add support to request uplink MUMIMO trigger stats from firmware through HTT stats type 27. These stats give information about bandwidth, RSSI of signal received, dB mean of pilots received, etc., of all users. Note: MCC firmware version WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not support tags HTT_STATS_RX_PDEV_UL_TRIG_STATS_TAG(94) and HTT_STATS_RX_PDEV_UL_OFDMA_USER_STATS_TAG(95), currently. Sample output: ------------- echo 27 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_RX_PDEV_UL_MUMIMO_TRIG_STATS_TLV: mac_id = 0 rx_11ax_ul_mumimo = 0 ul_mumimo_rx_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ul_mumimo_rx_gi_0 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ul_mumimo_rx_gi_1 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ..... ul_mumimo_rx_nss = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 ul_mumimo_rx_bw = 0:0, 1:0, 2:0, 3:0 half_ul_mumimo_rx_bw = 0:0, 1:0, 2:0, 3:0 quarter_ul_mumimo_rx_bw = 0:0, 1:0, 2:0, 3:0 ul_mumimo_rx_stbc = 0 ul_mumimo_rx_ldpc = 0 rx_ul_mumimo_rssi_in_dbm: chain0 = 0:6, 1:0, 2:0, 3:0 rx_ul_mumimo_rssi_in_dbm: chain1 = 0:0, 1:0, 2:0, 3:0 ..... rx_ul_mumimo_target_rssi: user_0 = 0:-128, 1:-128, 2:-128, 3:-128 rx_ul_mumimo_target_rssi: user_1 = 0:-128, 1:-128, 2:-128, 3:-128 ..... rx_ul_mumimo_fd_rssi: user_0 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ul_mumimo_fd_rssi: user_1 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 ..... rx_ulmumimo_pilot_evm_db_mean: user_0 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ulmumimo_pilot_evm_db_mean: user_1 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 ..... ul_mumimo_basic_trigger_rx_qos_null_only = 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250204064417.3671928-5-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Support Uplink OFDMA Trigger StatsDinesh Karthikeyan
Add support to request uplink trigger stats from firmware through HTT stats type 26. These stats give information about uplink OFDMA bandwidth, received RSSI, power headroom, QoS, data size, PPDU info and pass/fail info for each user. Note: MCC firmware version WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not support tags HTT_STATS_RX_PDEV_UL_TRIG_STATS_TAG(94) and HTT_STATS_RX_PDEV_UL_OFDMA_USER_STATS_TAG(95), currently. Sample output: ------------- echo 26 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_RX_PDEV_UL_TRIGGER_STATS_TLV: mac_id = 0 rx_11ax_ul_ofdma = 0 ul_ofdma_rx_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_gi[0] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_gi[1] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_gi[2] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_gi[3] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_nss = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 ul_ofdma_rx_bw = 0:0, 1:0, 2:0, 3:0 half_ul_ofdma_rx_bw = 0:0, 1:0, 2:0, 3:0 quarter_ul_ofdma_rx_bw = 0:0, 1:0, 2:0, 3:0 ..... HTT_RX_PDEV_UL_OFDMA_USER_STAS_TLV: rx_ulofdma_non_data_ppdu_0 = 0 rx_ulofdma_data_ppdu_0 = 0 rx_ulofdma_mpdu_ok_0 = 0 rx_ulofdma_mpdu_fail_0 = 0 rx_ulofdma_non_data_nusers_0 = 0 rx_ulofdma_data_nusers_0 = 0 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250204064417.3671928-4-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Support Latency StatsDinesh Karthikeyan
Add support to request latency stats from firmware through HTT stats type 25. These stats give information about count of transmitted and received MAC Protocol Data Units(PDU) and Service Data Units(SDU) and other latency stats. Sample output: ------------- echo 25 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_STATS_LATENCY_CTX_TLV: duration = 0 tx_msdu_cnt = 0 tx_mpdu_cnt = 0 rx_msdu_cnt = 0 rx_mpdu_cnt = 0 HTT_STATS_LATENCY_PROF_TLV: Latency name = PROF_SCH_ENQ_TQM_CMDS count = 0 minimum = 4294967295 maximum = 0 ..... HTT_STATS_LATENCY_CNT_TLV: prof_enable_cnt = 39 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250204064417.3671928-3-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Support Sounding StatsDinesh Karthikeyan
Add support to request sounding stats from firmware through HTT stats type 22. These stats give sounding information of different Wi-Fi standards, channel vector upload status and correlation details. Sample output: ------------- echo 22 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_TX_AC_SOUNDING_STATS_TLV: ac_cbf_20 = IBF: 0, SU_SIFS: 0, SU_RBO: 0, MU_SIFS: 0, MU_RBO: 0 ac_cbf_40 = IBF: 0, SU_SIFS: 0, SU_RBO: 0, MU_SIFS: 0, MU_RBO: 0 ..... Sounding User_0 = 20MHz: 0, 40MHz: 0, 80MHz: 0, 160MHz: 0 Sounding User_1 = 20MHz: 0, 40MHz: 0, 80MHz: 0, 160MHz: 0 ..... HTT_TX_AX_SOUNDING_STATS_TLV: ax_cbf_20 = IBF: 0, SU_SIFS: 0, SU_RBO: 0, MU_SIFS: 0, MU_RBO: 0 ax_cbf_40 = IBF: 0, SU_SIFS: 0, SU_RBO: 0, MU_SIFS: 0, MU_RBO: 0 ..... Sounding User_0 = 20MHz: 0, 40MHz: 0, 80MHz: 0, 160MHz: 0 Sounding User_1 = 20MHz: 0, 40MHz: 0, 80MHz: 0, 160MHz: 0 ..... HTT_TX_BE_SOUNDING_STATS_TLV: be_cbf_20 = IBF: 0, SU_SIFS: 0, SU_RBO: 0, MU_SIFS: 0, MU_RBO: 0 be_cbf_40 = IBF: 0, SU_SIFS: 0, SU_RBO: 0, MU_SIFS: 0, MU_RBO: 0 ..... Sounding User_0 = 20MHz: 0, 40MHz: 0, 80MHz: 0, 160MHz: 0, 320MHz: 0 Sounding User_1 = 20MHz: 0, 40MHz: 0, 80MHz: 0, 160MHz: 0, 320MHz: 0 ..... CV UPLOAD HANDLER STATS: cv_nc_mismatch_err = 0 cv_fcs_err = 0 cv_frag_idx_mismatch = 0 cv_invalid_peer_id = 0 ..... CV QUERY STATS: cv_total_query = 0 cv_total_pattern_query = 0 cv_total_bw_query = 0 cv_invalid_bw_coding = 0 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250204064417.3671928-2-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Enable MLO for single split-phy PCI deviceAaradhana Sahu
The single split-phy PCI device can perform multi-link operation (MLO) within its own radio, and the MLO-supporting firmware also supports MLO for split-phy PCI devices. Therefore, enable MLO for the single split-phy PCI device. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250207050327.360987-4-quic_aarasahu@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Remove dependency on single_chip_mlo_support for mlo_capable flagAaradhana Sahu
The mlo_capable flag in structure ath12k_hw_group indicate that a device is capable of operating in multi-link mode. Currently this is enabled based on single_chip_mlo_support advertised by the firmware within ath12k_qmi_phy_cap_send(). Since the firmware advertises multi-link operation (MLO) support through the ATH12K_FW_FEATURE_MLO feature in firmware-2.bin, there is no need to rely on the QMI phy capability (single_chip_mlo_support). Therefore remove the dependency on single_chip_mlo_support to set mlo_capable flag. Below is the impact on single split-phy PCI device with and without this patch: Note: This patch does not change the existing behavior of the single split-phy PCI device. 1. Driver without this patch + firmware with single_chip_mlo_support as false: MLO is not enabled. 2. Driver without this patch + firmware with single_chip_mlo_support as true: MLO works fine. 3. Driver with this patch + firmware with single_chip_mlo_support as false: MLO is not enabled. 4. Driver with this patch + firmware with single_chip_mlo_support as true: MLO works fine. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250207050327.360987-3-quic_aarasahu@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Enable MLO setup ready and teardown commands for single ↵Aaradhana Sahu
split-phy device When multi-link operation(MLO) is enabled through follow-up patches in the single split-phy device, the firmware expects hardware links (hw_links) information from the driver. If driver does not send WMI multi-link setup and ready command to the firmware during MLO setup for single split-phy device, the firmware will be unaware of the hw_links component of the multi-link operation. This may lead to firmware assert during multi-link association. Therefore, enable WMI setup, ready and teardown commands for single split-phy PCI device. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250207050327.360987-2-quic_aarasahu@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Fix locking in "QMI firmware ready" error pathsBart Van Assche
If ag->mutex has been locked, unlock it before returning. If it has not been locked, do not unlock it before returning. These bugs have been detected by the Clang thread-safety analyzer. Cc: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Cc: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Fixes: ee146e11b4d9 ("wifi: ath12k: refactor core start based on hardware group") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250206221317.3845663-1-bvanassche@acm.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Add support for MLO Multicast handling in driverBalamurugan Mahalingam
For MLO netdevice, the broadcast frame should be transmitted with the same sequence number on all the links. Per IEEE 802.11be-2024 section 10.3.2.14.2 "Transmitter requirements", An AP MLD shall use SNS11 in Table 10-5 (Transmitter sequence number spaces) maintained by the MLD to determine the sequence number of a group addressed data frame that is transmitted by an AP affiliated with the AP MLD so that the same group addressed Data frame transmitted over multiple links by the AP MLD uses the same sequence number for transmission on each link. Currently the MLO multicast handling is done in the mac80211 layer. Enable support for handling MLO Multicast in the driver to update the hardware descriptors in a custom way to handle the multicast frames. Firmware expects the MLO multicast frames to the submitted to the hardware with special vdev_id (actual vdev_id + 128) to recognize it as a host inspected frame to avoid using the reinjected path and it also uses the multicast global sequence number (GSN) provided by the host in the HTT metadata to process and transmit it with the same sequence number. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250203212647.2694566-3-quic_bmahalin@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Update HTT_TCL_METADATA version and bit mask definitionsBalamurugan Mahalingam
Update the HTT_TCL_METADATA version to the latest version (2) as the bit definitions have changed a little to support more features. This new version allows the host to submit a packet with more information to the firmware. Firmware uses this additional information to do special processing for certain frames. All the firmware binaries available in upstream/public are compatible with this HTT version update. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250203212647.2694566-2-quic_bmahalin@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: handle link removal in change_vif_links()Aditya Kumar Singh
Currently, the link interface is deleted during channel unassignment, which does not align with mac80211 link handling. Therefore, add changes to only perform vdev stop during channel unassignment. The actual vdev deletion will occur in change_vif_links(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1.97421.5 # Nicolas Escande Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Link: https://patch.msgid.link/20250204-unlink_link_arvif_from_chanctx-v2-8-764fb5973c1a@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: allocate new links in change_vif_links()Aditya Kumar Singh
Currently, links in an interface are allocated during channel assignment via assign_vif_chanctx(). Conversely, links are deleted during channel unassignment via unassign_vif_chanctx(). However, deleting links during channel unassignment does not comply with mac80211 link handling. Therefore, this process should be managed within change_vif_links(). To maintain symmetry, link addition should also be handled in change_vif_links(). Hence, add changes to allocate link arvif in change_vif_links(). Creating the link interface on firmware will still be done during channel assignment. And since link will be created but channel might not be assigned, there is a need now to test is_created flag in ath12k_mac_mlo_get_vdev_args() before accessing link_conf or else link bring up will fail. A subsequent change will handle link removal part. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1.97421.5 # Nicolas Escande Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Link: https://patch.msgid.link/20250204-unlink_link_arvif_from_chanctx-v2-7-764fb5973c1a@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: relocate a few functions in mac.cAditya Kumar Singh
An upcoming change will invoke ath12k_mac_init_arvif(), ath12k_mac_assign_link_vif(), ath12k_mac_unassign_link_vif(), and ath12k_mac_remove_link_interface() from a line located above their current definition. Hence, relocate these functions to above so that these can be invoked later on. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1.97421.5 # Nicolas Escande Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Link: https://patch.msgid.link/20250204-unlink_link_arvif_from_chanctx-v2-6-764fb5973c1a@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: use arvif instead of link_conf in ath12k_mac_set_key()Aditya Kumar Singh
Currently, in ath12k_mac_set_key(), if sta is not present, the address is retrieved from link_conf's bssid or addr member, depending on the interface type. When operating as an ML station and during shutdown, link_conf will not be available. This can result in the following error: ath12k_pci 0004:01:00.0: unable to access bss link conf in set key for vif AA:BB:CC:DD:EE:FF link 1 The primary purpose of accessing link_conf is to obtain the address for finding the peer. However, since arvif is always valid in this call, it can be used instead. Add change to use arvif instead of link_conf. A subsequent change will expose this issue but since tear down will give error, this is included first. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1.97421.5 # Nicolas Escande Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Link: https://patch.msgid.link/20250204-unlink_link_arvif_from_chanctx-v2-5-764fb5973c1a@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: remove redundant logic for initializing arvifAditya Kumar Singh
The current logic for initializing arvif is present in both the add interface operation callback and ath12k_mac_assign_link_vif(). The former handles deflink initialization, while the latter is responsible for other links. This redundancy could be avoided by using a common helper function. Hence, add a new helper ath12k_mac_init_arvif() which initializes a given arvif. Since synchronizing rcu is not required after adding a rcu pointer, remove that now. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1.97421.5 # Nicolas Escande Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Link: https://patch.msgid.link/20250204-unlink_link_arvif_from_chanctx-v2-4-764fb5973c1a@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: remove redundant vif settings during link interface creationAditya Kumar Singh
Currently, vif level settings are done in ath12k_mac_assign_link_vif() as well as in ath12k_mac_op_add_interface(). Since it is vif level settings, doing this on per link does not make sense and it contributes to redundant code. Get rid of this redundant code from ath12k_mac_assign_link_vif(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1.97421.5 # Nicolas Escande Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Link: https://patch.msgid.link/20250204-unlink_link_arvif_from_chanctx-v2-3-764fb5973c1a@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: introduce ath12k_generic_dbg()Aditya Kumar Singh
There might be instances where ath12k_dbg() is needed, but access to struct ath12k_base (ab) is not readily available. To address this, add support to print the debug message using printk() when ab is not present. To avoid the need to explicitly pass NULL each time, introduce a new macro ath12k_generic_dbg() which resolves to ath12k_dbg() with ab set to NULL. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1.97421.5 # Nicolas Escande Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Link: https://patch.msgid.link/20250204-unlink_link_arvif_from_chanctx-v2-2-764fb5973c1a@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: eliminate redundant debug mask check in ath12k_dbg()Aditya Kumar Singh
The current implementation includes a debug mask check both in the macro expansion and in the function __ath12k_dbg(), which is unnecessary. Simplify the code by removing the redundant check from the helper function __ath12k_dbg(). While at this, rename the first argument in macro from ar to ab since the first argument name in the function __ath12k_dbg() is ab. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1.97421.5 # Nicolas Escande Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Link: https://patch.msgid.link/20250204-unlink_link_arvif_from_chanctx-v2-1-764fb5973c1a@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Add peer extended Rx statistics debugfs supportKarthikeyan Periyasamy
Currently, peer extended Rx statistics are not supported. Therefore, expose peer extended Rx statistics support through debugfs, allowing users to enable or disable the collection of statistics information. After that the statistics information can be dumped through debugfs. Below are the debugfs commands exposed. Enable/Disable: echo <1/0> > /sys/kernel/debug/ieee80211/phyX/ath12k/ext_rx_stats Dump: cat /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/stations/<peer MAC addr>/rx_stats Sample output: ============== RX peer stats: Num of MSDUs: 1087 Num of MSDUs with TCP L4: 0 Num of MSDUs with UDP L4: 13 Num of other MSDUs: 1074 Num of MSDUs part of AMPDU: 363 Num of MSDUs not part of AMPDU: 724 Num of MSDUs using STBC: 0 Num of MSDUs beamformed: 0 Num of MPDUs with FCS ok: 695 Num of MPDUs with FCS error: 0 preamble: 11A 395 11B 0 11N 0 11AC 0 11AX 692 11BE 0 reception type: SU 1087 MU_MIMO 0 MU_OFDMA 0 MU_OFDMA_MIMO 0 TID(0-15) Legacy TID(16):690 1 0 0 1 0 0 0 0 0 0 0 0 0 0 0 395 RX Duration:39537 DCM: 0 RU26: 0 RU52: 0 RU106: 0 RU242: 0 RU484: 0 RU996: 0 RX success packet stats: EHT stats: MCS 0: 0 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 0 MCS 7: 0 MCS 8: 0 MCS 9: 0 MCS 10: 0 MCS 11: 0 MCS 12: 0 MCS 13: 0 MCS 14: 0 MCS 15: 0 HE stats: MCS 0: 1 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 66 MCS 7: 46 MCS 8: 46 MCS 9: 34 MCS 10: 28 MCS 11: 471 VHT stats: MCS 0: 0 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 0 MCS 7: 0 MCS 8: 0 MCS 9: 0 HT stats: MCS 0: 0 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 0 MCS 7: 0 MCS 8: 0 MCS 9: 0 MCS 10: 0 MCS 11: 0 MCS 12: 0 MCS 13: 0 MCS 14: 0 MCS 15: 0 MCS 16: 0 MCS 17: 0 MCS 18: 0 MCS 19: 0 MCS 20: 0 MCS 21: 0 MCS 22: 0 MCS 23: 0 MCS 24: 0 MCS 25: 0 MCS 26: 0 MCS 27: 0 MCS 28: 0 MCS 29: 0 MCS 30: 0 MCS 31: 0 Legacy stats: 1 Mbps: 0 2 Mbps: 0 5.5 Mbps: 0 6 Mbps: 395 9 Mbps: 0 11 Mbps: 0 12 Mbps: 0 18 Mbps: 0 24 Mbps: 0 36 Mbps: 0 48 Mbps: 0 54 Mbps: 0 NSS stats: 1x1: 1086 2x2: 0 3x3: 0 4x4: 0 5x5: 0 6x6: 0 7x7: 0 8x8: 0 GI: 0.8 us 0 0.4 us 396 1.6 us 691 3.2 us 0 BW: 20 MHz 785 40 MHz 2 80 MHz 300 160 MHz 0 320 MHz 0 20 Mhz gi 1 us 1x1 : 6:5 7:3 8:3 9:4 10:4 11:374 12:391 40 Mhz gi 1 us 1x1 : 12:2 80 Mhz gi 1 us 1x1 : 6:61 7:43 8:43 9:30 10:24 11:97 12:2 RX success byte stats: EHT stats: MCS 0: 0 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 0 MCS 7: 0 MCS 8: 0 MCS 9: 0 MCS 10: 0 MCS 11: 0 MCS 12: 0 MCS 13: 0 MCS 14: 0 MCS 15: 0 HE stats: MCS 0: 41 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 1435 MCS 7: 943 MCS 8: 697 MCS 9: 533 MCS 10: 492 MCS 11: 8159 VHT stats: MCS 0: 0 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 0 MCS 7: 0 MCS 8: 0 MCS 9: 0 HT stats: MCS 0: 0 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 0 MCS 7: 0 MCS 8: 0 MCS 9: 0 MCS 10: 0 MCS 11: 0 MCS 12: 0 MCS 13: 0 MCS 14: 0 MCS 15: 0 MCS 16: 0 MCS 17: 0 MCS 18: 0 MCS 19: 0 MCS 20: 0 MCS 21: 0 MCS 22: 0 MCS 23: 0 MCS 24: 0 MCS 25: 0 MCS 26: 0 MCS 27: 0 MCS 28: 0 MCS 29: 0 MCS 30: 0 MCS 31: 0 Legacy stats: 1 Mbps: 0 2 Mbps: 0 5.5 Mbps: 0 6 Mbps: 16195 9 Mbps: 0 11 Mbps: 0 12 Mbps: 0 18 Mbps: 0 24 Mbps: 0 36 Mbps: 0 48 Mbps: 0 54 Mbps: 0 NSS stats: 1x1: 28454 2x2: 0 3x3: 0 4x4: 0 5x5: 0 6x6: 0 7x7: 0 8x8: 0 GI: 0.8 us 0 0.4 us 16236 1.6 us 12259 3.2 us 0 BW: 20 MHz 24108 40 MHz 82 80 MHz 4305 160 MHz 0 320 MHz 0 20 Mhz gi 1 us 1x1 : 6:205 7:123 8:123 9:164 10:164 11:7257 12:16031 40 Mhz gi 1 us 1x1 : 12:82 80 Mhz gi 1 us 1x1 : 6:1230 7:820 8:574 9:369 10:328 11:902 12:82 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com> Signed-off-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250206013854.174765-10-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Refactor the format of peer rate table informationBalamurugan Mahalingam
Currently, peer rate table information involves complex computation for the rate index to update the rate table. To simplify this process, avoid the rate index calculation by defining the rate table with bandwidth, GI, NSS, MCS. Therefore, update the rate information based on the bandwidth, GI, NSS and MCS information from the TLV data of monitor status Rx path. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250206013854.174765-9-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Add EHT MCS support in Extended Rx statisticsBalamurugan Mahalingam
Currently, EHT MCS information is not populated. Therefore, add the EHT MCS counter array to the peer rate statistics and update the EHT MCS statistics from the status TLV data in the monitor Rx path. In the future, this information will be used in the peer extended Rx statistics dump. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250206013854.174765-8-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: fix the ampdu id fetch in the HAL_RX_MPDU_START TLVP Praneesh
Currently, ampdu id is update with peer id mask which is incorrect. Therefore, update the ampdu id with PPDU id mask value. Also move the ampdu_id field inside the user stats since it is a user id based statistics. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250206013854.174765-7-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Update the peer id in PPDU end user stats TLVKarthikeyan Periyasamy
Currently, peer id get reported in the PPDU end user TLV tag. But the monitor status handler is inherited from ath11k, but it was not updated to incorporate the changes made to ath12k 802.11be hardware architecture. Therefore, update the peer id from the PPDU end user TLV data to get latest peer id update, it helps to populate accurate peer information on the statistics data. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250206013854.174765-6-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Add HAL_PHYRX_OTHER_RECEIVE_INFO TLV parsing supportKarthikeyan Periyasamy
Currently, monitor is not enabled. However, in the future, the monitor will be enabled. Therefore, add the necessary HAL_PHYRX_OTHER_RECEIVE_INFO TLV parsing support in the monitor Rx path, which helps to populate the extended Rx statistics. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250206013854.174765-5-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Add HAL_RX_PPDU_START_USER_INFO TLV parsing supportKarthikeyan Periyasamy
Currently, monitor is not enabled. However, in the future, the monitor will be enabled. Therefore, add necessary HAL_RX_PPDU_START_USER_INFO TLV parsing support in monitor Rx path, which help to populate the EHT radiotap data. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250206013854.174765-4-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Add HAL_PHYRX_GENERIC_EHT_SIG TLV parsing supportKarthikeyan Periyasamy
Currently, monitor is not enabled. However, in the future, the monitor will be enabled. Therefore, add the necessary HAL_PHYRX_GENERIC_EHT_SIG TLV parsing support in monitor Rx path, which help to populate the EHT radiotap data. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250206013854.174765-3-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Add HAL_PHYRX_GENERIC_U_SIG TLV parsing supportKarthikeyan Periyasamy
Currently, monitor is not enabled. However, in the future, the monitor will be enabled. Therefore, add the necessary HAL_PHYRX_GENERIC_U_SIG TLV parsing support in monitor Rx path, which help to populate the EHT radiotap data. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250206013854.174765-2-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: add support of station average signal strengthNicolas Escande
This adds support for reporting to the kernel the average rssi. This is done the same way as it was done in ath11k. A simple ewma (with the same parameters) is updated with each rssi update. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Nicolas Escande <nico.escande@gmail.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250201211301.357985-1-nico.escande@gmail.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath12k: Add Support to Calculate and Display TPC ValuesSowmiya Sree Elavalagan
Transmit Power Control(TPC) stats should display per chain TPC value per radio. Add debugfs support to read and display TPC stats type and TPC stats. Take power values for each preamble type, rate and NSS combination from a particular index from each power arrays based on number of chains, NSS, modes, MCS and tx beamforming enabled/disabled parameters. Minimum of the values taken from reg power table, rates and Conformance Test Limit(CTL) array table should give the TPC which is in 0.25 dBm steps. Sample Output: ------------- echo 1 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/tpc_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/tpc_stats *************** TPC config ************** * powers are in 0.25 dBm steps reg domain-22 chan freq-5955 power limit-126 max reg-domain Power-252 No.of tx chain-4 No.of rates-1164 **************** SU WITH TXBF **************** TPC values for Active chains Rate idx Preamble Rate code 1-Chain 2-Chain 3-Chain 4-Chain 4 OFDM 0x000 39 15 1 -9 5 OFDM 0x001 39 15 1 -9 ..... 12 HT20 0x200 40 16 2 -8 13 HT20 0x201 40 16 2 -8 ..... 44 HT40 0x200 88 88 88 88 45 HT40 0x201 88 88 88 88 ..... 76 VHT20 0x300 40 16 2 -8 77 VHT20 0x301 40 16 2 -8 ..... 172 VHT40 0x300 88 88 88 88 173 VHT40 0x301 88 88 88 88 ..... 412 HE20 0x400 88 88 88 88 413 HE20 0x401 88 88 88 88 ..... 508 HE40 0x400 76 76 76 76 509 HE40 0x401 76 76 76 76 ..... 748 EHT20 0x50e 88 88 88 88 749 EHT20 0x50f 88 88 88 88 ..... 812 EHT40 0x50e 88 88 88 88 813 EHT40 0x50f 88 88 88 88 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250130061104.962124-3-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath12k: Add Support to Parse TPC Event from FirmwareSowmiya Sree Elavalagan
Host receives four Transmit Power Control(TPC) events from firmware on sending TPC request. Fixed param TLV is present as part of all event to indicate the event count and end of event. TPC config parameters along with regulatory power array comes as first event. Rates array comes as second and third event as it cannot be packed in single event. Conformance Test Limit (CTL) power array comes as the fourth event. Firmware packs different sets of array params which includes array length and type inside master TLV as different subtlvs. And the actual content of array is packed one after the other inside a separate TLV as single buffer. Parse various events and save it in local structures. Create tpc_stats file using debugfs to store these local structures. Create function to handle TPC stats read to relay the information to the user. Command usage: cat > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/tpc_stats Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250130061104.962124-2-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath12k: Dump additional PDEV receive rate HTT statsLingbo Kong
Support to dump additional PDEV receive rate stats through HTT debugfs stats type 30. Sample output: ------------------ echo 30 > /sys/kernel/debug/ath12k/pci-0000\:03\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:03\:00.0/mac0/htt_stats HTT_RX_PDEV_RATE_EXT_STATS_TLV: rssi_mgmt_in_dbm = -48 rx_stbc_ext = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ul_ofdma_rx_mcs_ext = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 rx_11ax_su_txbf_mcs_ext = 0:0, 1:0, 2:0, 3:0, 4:0, 5:9, 6:72, 7:41, 8:1, 9:0, 10:0, 11:0, 12:0, 13:0 rx_11ax_mu_txbf_mcs_ext = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 rx_11ax_dl_ofdma_mcs_ext = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 rx_bw_ext = 0:1395, 1:0, 2:0, 3:0, 4:0 rx_su_punctured_mode = 0:0, 1:0, 2:0, 3:0, 4:0 rx_mcs_ext = 0:0, 1:0, 2:0, 3:0, 4:0, 5:14, 6:149, 7:44, 8:1, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0 rx_gi_ext[0] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:14, 6:149, 7:44, 8:1, 9:0, 10:0, 11:0, 12:0, 13:0 rx_gi_ext[1] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 rx_gi_ext[2] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 rx_gi_ext[3] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ul_ofdma_rx_gi_ext[0] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ul_ofdma_rx_gi_ext[1] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ul_ofdma_rx_gi_ext[2] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ul_ofdma_rx_gi_ext[3] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250113071758.19589-4-quic_lingbok@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath12k: Dump PDEV receive rate HTT statsLingbo Kong
Support to dump PDEV receive rate stats through HTT debugfs stats type 10. Sample output: ----------------- echo 10 > /sys/kernel/debug/ath12k/pci-0000\:03\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:03\:00.0/mac0/htt_stats HTT_RX_PDEV_RATE_STATS_TLV: mac_id = 0 nsts = 0 rx_ldpc = 96 rts_cnt = 0 rssi_mgmt = 4294967240 rssi_data = 4294967250 rssi_comb = 4294967239 rssi_in_dbm = -46 rx_evm_nss_count = 0 rx_evm_pilot_count = 0 rx_11ax_su_ext = 0 rx_11ac_mumimo = 0 rx_11ax_mumimo = 0 rx_11ax_ofdma = 0 txbf = 0 rx_su_ndpa = 0 rx_mu_ndpa = 0 rx_br_poll = 0 rx_active_dur_us_low = 1000106 rx_active_dur_us_high = 0 rx_11ax_ul_ofdma = 0 ul_ofdma_rx_stbc = 0 ul_ofdma_rx_ldpc = 0 per_chain_rssi_pkt_type = 0x88 rx_nss = 0:40, 1:56, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_dcm = 0:0, 1:0, 2:0, 3:0, 4:0 rx_stbc = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 rx_bw = 0:1175, 1:0, 2:0, 3:0 rx_pream = 0:435, 1:644, 2:0, 3:0, 4:96, 5:0, 6:0 rx_11ax_su_txbf_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 rx_11ax_mu_txbf_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 rx_legacy_cck_rate = 0:641, 1:0, 2:3, 3:0 rx_legacy_ofdm_rate = 0:267, 1:0, 2:72, 3:0, 4:96, 5:0, 6:0, 7:0 ul_ofdma_rx_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_nss = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 ul_ofdma_rx_bw = 0:0, 1:0, 2:0, 3:0 rx_ulofdma_non_data_ppdu = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ulofdma_data_ppdu = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ulofdma_mpdu_ok = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ulofdma_mpdu_fail = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ulofdma_non_data_nusers = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ulofdma_data_nusers = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_11ax_dl_ofdma_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 rx_11ax_dl_ofdma_ru = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0 rx_ulmumimo_non_data_ppdu = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ulmumimo_data_ppdu = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ulmumimo_mpdu_ok = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ulmumimo_mpdu_fail = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_mcs = 0:0, 1:0, 2:0, 3:0, 4:28, 5:8, 6:37, 7:21, 8:2, 9:0, 10:0, 11:0, 12:0, 13:0 pilot_evm_db[0] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0 pilot_evm_db[1] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0 pilot_evm_db[2] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0 pilot_evm_db[3] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0 pilot_evm_db[4] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0 pilot_evm_db[5] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0 pilot_evm_db[6] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0 pilot_evm_db[7] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0 pilot_evm_db_mean = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rssi_chain_in_db[0] = 0: 196, 1: 29, 2: 29, 3: 29 rssi_chain_in_db[1] = 0: 196, 1: 29, 2: 29, 3: 29 rssi_chain_in_db[2] = 0: 128, 1: 128, 2: 128, 3: 128 rssi_chain_in_db[3] = 0: 128, 1: 128, 2: 128, 3: 128 rssi_chain_in_db[4] = 0: 128, 1: 128, 2: 128, 3: 128 rssi_chain_in_db[5] = 0: 128, 1: 128, 2: 128, 3: 128 rssi_chain_in_db[6] = 0: 128, 1: 128, 2: 128, 3: 128 rssi_chain_in_db[7] = 0: 128, 1: 128, 2: 128, 3: 128 rx_gi[0] = 0:0, 1:0, 2:0, 3:0, 4:28, 5:8, 6:37, 7:21, 8:2, 9:0, 10:0, 11:0 rx_gi[1] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 rx_gi[2] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 rx_gi[3] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_gi[0] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_gi[1] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_gi[2] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_gi[3] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 rx_ul_fd_rssi: nss[0] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ul_fd_rssi: nss[1] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ul_fd_rssi: nss[2] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ul_fd_rssi: nss[3] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ul_fd_rssi: nss[4] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ul_fd_rssi: nss[5] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ul_fd_rssi: nss[6] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ul_fd_rssi: nss[7] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_per_chain_rssi_in_dbm[0] = 0:-60, 1:29, 2:29, 3:29 rx_per_chain_rssi_in_dbm[1] = 0:-60, 1:29, 2:29, 3:29 rx_per_chain_rssi_in_dbm[2] = 0:-128, 1:-128, 2:-128, 3:-128 rx_per_chain_rssi_in_dbm[3] = 0:-128, 1:-128, 2:-128, 3:-128 rx_per_chain_rssi_in_dbm[4] = 0:-128, 1:-128, 2:-128, 3:-128 rx_per_chain_rssi_in_dbm[5] = 0:-128, 1:-128, 2:-128, 3:-128 rx_per_chain_rssi_in_dbm[6] = 0:-128, 1:-128, 2:-128, 3:-128 rx_per_chain_rssi_in_dbm[7] = 0:-128, 1:-128, 2:-128, 3:-128 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250113071758.19589-3-quic_lingbok@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath12k: Dump PDEV transmit rate HTT statsLingbo Kong
Support to dump PDEV transmit rate stats through HTT debugfs stats type 9. Sample output: ------------------------- echo 9 > /sys/kernel/debug/ath12k/pci-0000\:03\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:03\:00.0/mac0/htt_stats HTT_TX_PDEV_RATE_STATS_TLV: mac_id = 0 tx_ldpc = 1088 ac_mu_mimo_tx_ldpc = 0 ax_mu_mimo_tx_ldpc = 0 ofdma_tx_ldpc = 0 rts_cnt = 941 rts_success = 180 ack_rssi = 4294967168 Legacy CCK Rates: 1 Mbps: 830, 2 Mbps: 0, 5.5 Mbps: 0, 12 Mbps: 0 Legacy OFDM Rates: 6 Mbps: 942, 9 Mbps: 0, 12 Mbps: 0, 18 Mbps: 0 24 Mbps: 0, 36 Mbps: 0, 48 Mbps: 0, 54 Mbps: 0 HE LTF: 1x: 0, 2x: 957, 4x: 132 tx_mcs = 0:342, 1:260, 2:171, 3:148, 4:31, 5:34, 6:93, 7:10, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0 ax_mu_mimo_tx_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ofdma_tx_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 tx_nss = 1:754, 2:335, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 ac_mu_mimo_tx_nss = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 ax_mu_mimo_tx_nss = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 ofdma_tx_nss = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 tx_bw = 0:1089, 1:0, 2:0, 3:0, 4:0 tx_stbc = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 tx_gi[0] = 0:210, 1:260, 2:171, 3:148, 4:31, 5:34, 6:93, 7:10, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 tx_gi[1] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 tx_gi[2] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 tx_gi[3] = 0:132, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ac_mu_mimo_tx_gi[0] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ac_mu_mimo_tx_gi[1] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ac_mu_mimo_tx_gi[2] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ac_mu_mimo_tx_gi[3] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ax_mu_mimo_tx_gi[0] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ax_mu_mimo_tx_gi[1] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ax_mu_mimo_tx_gi[2] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ax_mu_mimo_tx_gi[3] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ofdma_tx_gi[0] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ofdma_tx_gi[1] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ofdma_tx_gi[2] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ofdma_tx_gi[3] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 tx_su_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 tx_mu_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ac_mu_mimo_tx_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ac_mu_mimo_tx_bw = 0:0, 1:0, 2:0, 3:0 ax_mu_mimo_tx_bw = 0:0, 1:0, 2:0, 3:0 ofdma_tx_bw = 0:0, 1:0, 2:0, 3:0 tx_pream = 0:942, 1:830, 2:0, 3:0, 4:1850, 5:0, 6:0 tx_dcm = 0:131, 1:0, 2:0, 3:0, 4:0 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250113071758.19589-2-quic_lingbok@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath12k: Add support for reading variant from ACPI to download board ↵Lingbo Kong
data file Currently, ath12k does not support reading variant from ACPI board data filename extension for downloading board data file. To address this issue, obtain the string of the ACPI data filename extension and use it as part of the string to search for the board data file from board-2.bin. This patch will not affect QCN9274, because only WCN7850 supports ACPI. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20250113074810.29729-5-quic_lingbok@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath12k: Adjust the timing to access ACPI tableLingbo Kong
Currently, the timing for accessing the ACPI table is inappropriate. Due to special ACPI requirements, the ACPI table must be obtained before downloading the board data file. Therefore, adjust the timing for accessing the ACPI table accordingly. This patch will not affect QCN9274, because only WCN7850 supports ACPI. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20250113074810.29729-4-quic_lingbok@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath12k: Add Support for enabling or disabling specific features based ↵Lingbo Kong
on ACPI bitflag Currently, ath12k does not support enable or disable specific features by ACPI bitflag. To address this issue, obtain the ACPI bitflag value and use it to selectively enable or disable specific features. This patch will not affect QCN9274, because only WCN7850 supports ACPI. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20250113074810.29729-3-quic_lingbok@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath12k: Add support for obtaining the buffer type ACPI function bitmapLingbo Kong
Currently, ath12k does not support obtaining the buffer type ACPI function bitmap. To solve this issue, change the code to support obtaining the buffer type ACPI function bitmap. This patch will not affect QCN9274, because only WCN7850 supports ACPI. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20250113074810.29729-2-quic_lingbok@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath12k: handle ath12k_mac_ieee80211_sta_bw_to_wmi() for link staAditya Kumar Singh
Currently ath12k_mac_ieee80211_sta_bw_to_wmi() handles the bandwidth from sta's deflink member. This works only for non-ML station. Now that MLO support is there, extend this function to use link sta instead of deflink. Additionally, in ath12k_mac_handle_link_sta_state(), the link sta structure is not accessible, making it difficult to fetch the bandwidth there. However, ath12k_mac_station_assoc() does reference the link sta structure. Therefore, move the initial assignment of the arsta bandwidth member to ath12k_mac_station_assoc(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Link: https://patch.msgid.link/20250110-fix_link_sta_bandwidth_update-v1-2-61b6f3ef2ea3@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath12k: relocate ath12k_mac_ieee80211_sta_bw_to_wmi()Aditya Kumar Singh
An upcoming change will invoke ath12k_mac_ieee80211_sta_bw_to_wmi() from a line located above its current definition. Hence, relocate it to above so that it can be invoked later on. No functionality changes. Compile tested only. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Link: https://patch.msgid.link/20250110-fix_link_sta_bandwidth_update-v1-1-61b6f3ef2ea3@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath12k: Avoid napi_sync() before napi_enable()Avula Sri Charan
In case of MHI error a reset work will be queued which will try napi_disable() after napi_synchronize(). As the napi will be only enabled after qmi_firmware_ready event, trying napi_synchronize() before napi_enable() will result in indefinite sleep in case of a firmware crash in QMI init sequence. To avoid this, introduce napi_enabled flag to check if napi is enabled or not before calling napi_synchronize(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Avula Sri Charan <quic_asrichar@quicinc.com> Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250124090058.3194299-1-quic_tamizhr@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath12k: prevent CSA counter to reach 0 and hit WARN_ON_ONCEAditya Kumar Singh
Currently, when the driver receives a channel switch count WMI event from the firmware with a count greater than 1, it calls ieee80211_beacon_update_cntdwn(). If the beacon transmission fails, the event will be received again with the previous count value. In this scenario, the host decrements the mac80211 counter again, causing it to move ahead of the firmware counter. Ultimately, when the firmware count reaches 1, the mac80211 counter will reach zero, triggering a WARN_ON_ONCE(). Therefore, there is a need to check the count value in the event. Hence to fix this, maintain the current ongoing counter in arvif. If the count in the event does not match the expected value, silently discard the event. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20250124-ath12k_mlo_csa-v2-4-420c42fcfecf@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath12k: update the latest CSA counterAditya Kumar Singh
At present, the driver configures the firmware to send the Channel Switch (CS) count event only when the count reaches zero during a Channel Switch Announcement (CSA). For frames managed by the upper layer, where the driver does not update the counter, the CS count in these frames remains unchanged throughout the entire CSA period. This is because the upper layer is not aware of the latest ongoing count. Indicating same count value throughout the CSA time is wrong and could lead to connection instabilities. Fix this by configuring firmware to send CS count event for every count and then accordingly decrementing the count in mac80211. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20250124-ath12k_mlo_csa-v2-3-420c42fcfecf@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath12k: fix handling of CSA offsets in beacon template commandAditya Kumar Singh
The driver is informed of the counter offsets in the beacon during CSA through the ieee80211_mutable_offsets structure. According to the documentation for the cntdwn_counter_offs member, "This array can contain zero values which should be ignored." However, the current implementation uses these values unconditionally, without checking for zeros. Whenever CSA is active, these offsets are guaranteed to be set. Therefore, add a check for CSA active status before setting the CSA switch count offsets. This ensures that the offsets are only set when CSA is active, preventing incorrect configurations. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20250124-ath12k_mlo_csa-v2-2-420c42fcfecf@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
generated by cgit (git 2.34.1) at 2025-09-21 06:02:04 +0000