summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath12k
AgeCommit message (Collapse)Author
2024-11-30wifi: ath12k: add ath12k_ab_to_ah() and ath12k_ab_set_ah()Karthikeyan Periyasamy
Currently, one or more ath12k_hw is part of a device (struct ath12k_base) but in future, it would be part of device group abstraction (struct ath12k_hw_group), i.e., when multiple radios (ar) across different devices can be combined together in a device group (struct ath12k_hw_group). In order to facilitate the above transition, introduce helpers ath12k_ab_to_ah() and ath12k_ab_set_ah() to get and set values of ath12k_hw respectively. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241128165026.2618331-3-kvalo@kernel.org
2024-11-30wifi: ath12k: Refactor core startupKarthikeyan Periyasamy
In the upcoming hardware device group abstraction radios across different devices can be grouped together to support multi-link operation and register as a device group to mac80211. Currently, ath12k_mac_allocate() and ath12k_mac_register() are part of ath12k_core_start() and ath12k_core_pdev_create() respectively and are based on per device (struct ath12k_base). These APIs can be decoupled and moved out to ath12k_core_qmi_firmware_ready() itself. This refactor is helpful for device group abstraction when mac80211 allocate and register will be changed from per device (struct ath12k_base) to per device group (struct ath12k_hw_group). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241128165026.2618331-2-kvalo@kernel.org
2024-11-29wifi: ath12k: ath12k_mac_op_sta_rc_update(): use mac80211 provided link idKalle Valo
There's a todo comment to use mac80211 provided link id. As mac80211 now provides it use it in ath12k and remove the comment. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241126171139.2350704-11-kvalo@kernel.org
2024-11-29wifi: ath12k: ath12k_mac_op_set_key(): fix uninitialized symbol 'ret'Kalle Valo
Dan reported that in some cases the ret variable could be uninitialized. Fix that by removing the out label entirely and returning zero explicitly on succesful cases. Also remove the unnecessary else branches to follow more the style used in ath12k and now it's easier to see the error handling. No functional changes. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/7e7afd00-ad84-4744-8d94-416bab7e7dd9@stanley.mountain/ Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241126171139.2350704-10-kvalo@kernel.org
2024-11-29wifi: ath12k: defer vdev creation for MLORameshkumar Sundaram
Currently for single radio devices (ah->num_radio == 1) ath12k_mac_op_add_interface() creates vdev and later hw scan and assign_vif_chanctx uses the same. For MLO, vdev create request should carry ML address which will not be known during ath12k_mac_op_add_interface() as vif will be marked as ML only after links are added to it. If hw scan is requested, the vdev will be deleted post hw scan and subsequent assign_vif_chanctx call will create new vdev with ML address. But in certain cases assign_vif_chanctx could be called without any prior hw scan request and reusing the previously created vdev causes a non-ML vdev to be used for an ML vif and firmware operates the vdev in non-ML mode. Fix this by deferring vdev creation for interface until hw scan or assign_vif_chanctx request is received from mac80211. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241126171139.2350704-9-kvalo@kernel.org
2024-11-29wifi: ath12k: ath12k_bss_assoc(): MLO supportAditya Kumar Singh
Currently, the ath12k_bss_assoc() function handles only deflink station connections. To support multi-link station connections, make the necessary changes to retrieve the required information from the link-level members. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241126171139.2350704-8-kvalo@kernel.org
2024-11-29wifi: ath12k: do not return invalid link id for scan linkSriram R
When a scan request is received, driver selects a link id for which the arvif can be mapped. Same link is also used for getting the link conf address. Currently, we return 0 as link id for a non ML vif, which is correct since that is the default link id. Also when any of the link vif is active and the scan request is for a channel in the active link we return its link id. But, when we don't hit both of the above cases (i.e not a ML vif or no active link vif for the channel is present) we currently return 0 as the link id. Bu the problemis that this might not work out always, eg., when only one link (eg. linkid = 1) is added to vif, then we won't find any link conf for link id 0 in the vif resulting in scan failure. During AP bringup, such scan failure causes bringup issues. Hence avoid sending link id 0 as default. Rather use a default link for scan and default link address for the same. This scan vdev will either be deleted if another scan is requested on same vif or when AP is broughtup on same link or during interface cleanup. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241126171139.2350704-7-kvalo@kernel.org
2024-11-29wifi: ath12k: ath12k_mac_station_add(): fix potential rx_stats leakRameshkumar Sundaram
If peer creation fails ar->rx_stats needs to be freed in error handling. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241126171139.2350704-6-kvalo@kernel.org
2024-11-29wifi: ath12k: ath12k_mac_op_ampdu_action(): MLO supportSriram R
Apply tid queue setup based on all link stations on receiving ampdu action params for an ML Station. Modify ath12k_get_ar_by_vif() to fetch ar based on link arvif inside ahvif. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241126171139.2350704-5-kvalo@kernel.org
2024-11-29wifi: ath12k: ath12k_mac_op_flush(): MLO supportSriram R
Currently when tx flush is requested for an vif only packets corresponding to deflink are flushed, with MLO multiple link arvif could be affiliated to the ML vif and packets corresponding to all of them should be flushed. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Maharaja Kennadyrajan <quic_mkenna@quicinc.com> Signed-off-by: Maharaja Kennadyrajan <quic_mkenna@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241126171139.2350704-4-kvalo@kernel.org
2024-11-29wifi: ath12k: ath12k_mac_op_tx(): MLO supportSriram R
For a frame transmission for an ML vif, mac80211 mentions transmit link id in the tx control info. Use it to convert the RA/TA to the corresponding link sta and link vif address before enqueueing the frame for transmission. For 802.3 data frames, always enqueue the frame on the primary (assoc) link id. Firmware does the link selection, builds 802.11 header and therefore the address translation too. Also ensure right link vif is used for WMI based management transmission and add comments to document when RCU read lock is held. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241126171139.2350704-3-kvalo@kernel.org
2024-11-29wifi: ath12k: convert struct ath12k::wmi_mgmt_tx_work to struct wiphy_workKalle Valo
To simplify locking for the next patches convert struct ath12k::wmi_mgmt_tx_work to use wiphy_work. After this ath12k_mgmt_over_wmi_tx_work() is called with wiphy_lock() taken. In ath12k_core_suspend() we need to take wiphy_lock() because ath12k_mac_wait_tx_complete() requires it. Also add lockdep_assert_wiphy() to document when wiphy_lock() is held. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241126171139.2350704-2-kvalo@kernel.org
2024-11-25wifi: ath12k: Use mac80211 sta's link_sta instead of deflinkSriram R
Currently mac80211's struct ieee80211_sta deflink is used to fetch any sta related configurations in driver. With MLO multiple link sta's (struct ieee80211_link_sta) are affiliated to an ML sta and corresponding link configs are present in sta->link[]. Fetch link sta of corresponding link from ML sta and use the same for configurations. Add ath12k_mac_get_link_sta() helper to fetch ieee80211_link_sta from arsta. But as ath12k_mac_op_sta_rc_update() is called in atomic context the helper cannot be used and instead rcu_dereference() has to be called directly. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241121155806.1862733-9-kvalo@kernel.org
2024-11-25wifi: ath12k: Use mac80211 vif's link_conf instead of bss_confSriram R
Currently mac80211 vif's bss_conf is used to fetch any vif related configurations in driver but with MLO multiple links are affiliated to a vif and corresponding link configs are present in vif->link_conf[]. Fetch link_conf for corresponding link from vif and use the same for configurations. Add ath12k_mac_get_link_bss_conf() helper to fetch link_conf from arvif. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241121155806.1862733-8-kvalo@kernel.org
2024-11-25wifi: ath12k: modify chanctx iterators for MLORameshkumar Sundaram
Currently ath12k's chanctx iterator functions use deflink of given ahvif and bss_conf of corresponding vif to make sure the iterator returns intended vif. An ML vif can have multiple affiliated links each having its own channel context, hence iterate through the links of the given ahvif and use the link objects (arvif and link_conf) to make sure the chan ctx iterator returns intended link of the given vif. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241121155806.1862733-7-kvalo@kernel.org
2024-11-25wifi: ath12k: add reo queue lookup table for ML peersRameshkumar Sundaram
Currently reoqueue tid setup uses lookup table (LUT) during peer association, but for ML peer there will be multiple link peers (belonging to different underlying firmware) affiliated to each other. Hence the reo queue should be setup only on one of the links which is the primary link. Add changes to create separate ML reo queue lookup table for ML peers and use the same while setting up rx tid for ML peer's primary link. For ML peers use ml_peer_id instead of peer_id to setup/lookup the reo queue entry in the LUT. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241121155806.1862733-6-kvalo@kernel.org
2024-11-25wifi: ath12k: use arsta instead of staSriram R
Currently, struct ieee80211_sta (sta) is used for many WMI and mac80211 ops but for multi link station, driver should use struct ath12k_link_sta (arsta) instead of sta. Add changes to use arsta object for WMI commands and other mac80211 ops. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241121155806.1862733-5-kvalo@kernel.org
2024-11-25wifi: ath12k: add primary link for data path operationsSriram R
In case of Multi-link operation, data path peer setup and tid setup should be done only for primary link of multi-link station. Add changes to introduce primary link is peer. Currently, association link will be considered as primary link. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241121155806.1862733-4-kvalo@kernel.org
2024-11-25wifi: ath12k: support change_sta_links() mac80211 opSriram R
Add ath12k_mac_op_change_sta_links() for adding and removing link station. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241121155806.1862733-3-kvalo@kernel.org
2024-11-25wifi: ath12k: Add MLO station state change handlingSriram R
Add changes to handle multi-link station state change with proper link handling and add code changes for ML peer creation, peer deletion. In ath12k_mac_assign_link_sta() initialise all arsta fields first and only then call rcu_assign_pointer(). This is to make sure that readers don't have access to arsta which is still modified. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241121155806.1862733-2-kvalo@kernel.org
2024-11-21wifi: ath12k: Fix inappropriate use of print_array_to_buf_index()Roopni Devanathan
Currently in ath12k_htt_print_tx_pdev_mumimo_grp_stats_tlv() the htt_stats_buf->ul_mumimo_grp_best_usrs array is printed using print_array_to_buf_index() with a stats_index of 1. This is meant to convey the semantic that first entry in ul_mumimo_grp_best_usrs is associated with user 1. However, unlike some of the other "usr" arrays which have that semantic, ul_mumimo_grp_best_usrs does not have that semantic. Instead the first entry corresponds to user 0. Fix the issue by calling the API - print_array_to_buf(), instead of print_array_to_buf_index(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241118035722.1755373-1-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-21wifi: ath12k: Fix endianness issue in struct hal_tlv_64_hdrP Praneesh
struct hal_tlv_64_hdr has a 64-bit member that should be in little-endian format, but the current definition uses host byte order. Fix this by changing the definition and updating the corresponding helper functions used for the byte order conversion. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241119164516.756478-1-quic_ppranees@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-20wifi: ath12k: Support MBSSID Control Frame StatsSidhanta Sahu
Add support to request MBSSID control frame stats from firmware through HTT stats type 54. These stats give information such as basic trigger, BSR trigger, multi-user RTS and uplink MUMIMO trigger within and across various BSS. Note: WCN7850 firmware version - WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not support HTT stats type 54. Sample output: ------------- echo 54 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_MBSSID_CTRL_FRAME_STATS_TLV: mac_id = 0 basic_trigger_across_bss = 0 basic_trigger_within_bss = 0 bsr_trigger_across_bss = 0 bsr_trigger_within_bss = 0 mu_rts_across_bss = 0 mu_rts_within_bss = 0 ul_mumimo_trigger_across_bss = 0 ul_mumimo_trigger_within_bss = 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sidhanta Sahu <quic_sidhanta@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241105052854.2118987-1-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-20wifi: ath12k: Support Transmit PER Rate StatsDinesh Karthikeyan
Add support to request per rate stats through HTT stats type 40. These stats give information about rates of PPDUs and MPDUs for single user and for OFDMA and MUMIMO technologies corresponding to multiple users. Sample output: ------------- echo 40 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_TX_PER_STATS: PER_STATS_SU: PER per BW: ppdus_tried_su = 0:0 1:0 2:0 3:0 4:0 ppdus_ack_failed_su = 0:0 1:0 2:0 3:0 4:0 mpdus_tried_su = 0:0 1:0 2:0 3:0 4:0 mpdus_failed_su = 0:0 1:0 2:0 3:0 4:0 PER per NSS: ppdus_tried_su = 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 ppdus_ack_failed_su = 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 mpdus_tried_su = 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 mpdus_failed_su = 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 PER per MCS: ppdus_tried_su = 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 8:0 9:0 10:0 11:0 12:0 13:0 ppdus_ack_failed_su = 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 8:0 9:0 10:0 11:0 12:0 13:0 mpdus_tried_su = 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 8:0 9:0 10:0 11:0 12:0 13:0 mpdus_failed_su = 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 8:0 9:0 10:0 11:0 12:0 13:0 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241115062854.1919672-5-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-20wifi: ath12k: Support SoC Common StatsDinesh Karthikeyan
Add support to request SoC stat from firmware through HTT stat type 38. This stat gives drop count of SoC. Note: MCC firmware version - WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not support tag HTT_STATS_SOC_TXRX_STATS_COMMON_TAG(125). Sample output: ------------- echo 38 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_SOC_COMMON_STATS_TLV: soc_drop_count = 0x0000000000000000 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241115062854.1919672-4-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-20wifi: ath12k: Support phy counter and TPC statsDinesh Karthikeyan
Add support to request counters and Transmission Power Control (TPC) stats through HTT stats type 37. These stats give information about counters like received packet count, CRC pass count, error count, transmit abort count, etc., about counter reset like reset cause, channel frequency, number and mode, channel flags, etc., about TPC like transmit power scale, maximum transmit power, gain cap, EIRP, etc. Note: MCC firmware version - WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not support HTT stats type 37, i.e., the firmware does not respond to the command requesting stats. Sample output: ------------- echo 37 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_PHY_STATS_TLV: bdf_nf_chain[0] = -92 bdf_nf_chain[1] = -94 bdf_nf_chain[2] = -94 bdf_nf_chain[3] = -93 ..... HTT_PHY_COUNTERS_TLV: rx_ofdma_timing_err_cnt = 18068 rx_cck_fail_cnt = 0 mactx_abort_cnt = 2612 macrx_abort_cnt = 0 ..... HTT_PHY_RESET_STATS_TLV: pdev_id = 0 chan_mhz = 0 chan_band_center_freq1 = 0 chan_band_center_freq2 = 0 ..... HTT_PHY_RESET_COUNTERS_TLV: pdev_id = 0 cf_active_low_fail_cnt = 0 cf_active_low_pass_cnt = 0 phy_off_through_vreg_cnt = 0 ..... HTT_PHY_TPC_STATS_TLV: pdev_id = 0 tx_power_scale = 0 tx_power_scale_db = 0 min_negative_tx_power = 0 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241115062854.1919672-3-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-20wifi: ath12k: Support Downlink Pager StatsDinesh Karthikeyan
Add support to request downlink pager stats from firmware through HTT stats type 36. These stats give paging information like number of pages, their timestamp, number of locked and free pages, synchronous and asynchronous locked pages. Note: MCC firmware version - WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 responds to the event requesting stats, but it does not give any data. Sample output: ------------- echo 36 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_DLPAGER_STATS_TLV: ASYNC locked pages = 2 SYNC locked pages = 0 Total locked pages = 2 Total free pages = 127 LOCKED PAGES HISTORY last_locked_page_idx = 0 Index - 0 ; Page Number - 8495 ; Num of pages - 1 ; Timestamp - 4031009360us Index - 1 ; Page Number - 7219 ; Num of pages - 2 ; Timestamp - 885379515us Index - 2 ; Page Number - 0 ; Num of pages - 0 ; Timestamp - 0us Index - 3 ; Page Number - 0 ; Num of pages - 0 ; Timestamp - 0us ..... UNLOCKED PAGES HISTORY last_unlocked_page_idx = 0 Index - 0 ; Page Number - 7144 ; Num of pages - 2 ; Timestamp - 4032070008us Index - 1 ; Page Number - 7214 ; Num of pages - 2 ; Timestamp - 885379512us Index - 2 ; Page Number - 0 ; Num of pages - 0 ; Timestamp - 0us Index - 3 ; Page Number - 0 ; Num of pages - 0 ; Timestamp - 0us ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241115062854.1919672-2-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-12wifi: ath12k: Fix for out-of bound access errorKarol Przybylski
Selfgen stats are placed in a buffer using print_array_to_buf_index() function. Array length parameter passed to the function is too big, resulting in possible out-of bound memory error. Decreasing buffer size by one fixes faulty upper bound of passed array. Discovered in coverity scan, CID 1600742 and CID 1600758 Signed-off-by: Karol Przybylski <karprzy7@gmail.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241105101132.374372-1-karprzy7@gmail.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-06wifi: ath12k: Add MLO peer assoc command supportSriram R
Add changes to send MLO peer assoc command with partner link details and primary umac details. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241101151705.165987-9-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-06wifi: ath12k: add helper to find multi-link stationSriram R
Multi-link stations are identified in driver using the multi-link peer id and they have ATH12K_PEER_ML_ID_VALID bit set in the id. Add a helper to find multi-link station using the multi-link peer id. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241101151705.165987-8-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-06wifi: ath12k: add multi-link flag in peer create commandSriram R
Driver should indicate to firmware whether a peer is multi-link or not in peer create command using multi-link flag. Add changes to support WMI_TAG_MLO_PEER_CREATE_PARAMS in WMI_PEER_CREATE_CMDID. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241101151705.165987-7-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-06wifi: ath12k: Add helpers for multi link peer creation and deletionSriram R
Add helper functions for multi link peer addition and deletion. And add address validation to ensure we are not creating link peers (belonging to different clients) with same MLD address. To aid in this validation for faster lookup, add a new list of ML peers to struct ath12k_hw::ml_peers and use the same for parsing for the above address validation use cases. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241101151705.165987-6-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-06wifi: ath12k: introduce ath12k_hw_warn()Kalle Valo
In the following patch we need to use ath12k_warn() but don't easily have access to struct ath12k_base (ab) but do have access to struct ath12k_hw (ah). So add a new warning helper ath12_hw_warn() which takes the latter but the log output is still identical but uses the struct device pointer stored to struct ath12k_hw. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241101151705.165987-5-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-06wifi: ath12k: Refactor sta state machineSriram R
Refactor ath12k_mac_op_sta_state(), with generic wrappers which can be used for both multi link stations and non-ML stations. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241101151705.165987-4-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-06wifi: ath12k: MLO vdev bringup changesSriram R
Add changes to add the link vdevs dynamically whenever a channel is assigned from mac80211 for a link vdev. During vdev create, update ML address of the vdev to firmware using the new WMI parameter (WMI_TAG_MLO_VDEV_CREATE_PARAMS). During vdev start, notify the firmware that this link vdev is newly added and also indicate all its known partners so that the firmware can take necessary actions to internally update the partners on the new link being added. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241101151705.165987-3-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-06wifi: ath12k: ath12k_mac_vdev_create(): use goto for error handlingKalle Valo
In commit 477cabfdb776 ("wifi: ath12k: modify link arvif creation and removal for MLO") I had accidentally left one personal TODO comment about using goto instead of ret. Switch to use goto to be consistent with the error handling in the function. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241101151705.165987-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-06wifi: ath12k: mark QMI driver event helpers as noinlineJeff Johnson
As described in [1], compiling the ath12k driver using clang with KASAN enabled warns about some functions with excessive stack usage, with the worst case being: drivers/net/wireless/ath/ath12k/qmi.c:3546:13: warning: stack frame size (2456) exceeds limit (1024) in 'ath12k_qmi_driver_event_work' [-Wframe-larger-than] Nathan [2] highlighted work done by Arnd [3] to address similar issues in other portions of the kernel. ath12k_qmi_driver_event_work() itself is a pretty lightweight function, but it dispatches to several other functions which do the real work: ath12k_qmi_driver_event_work() ath12k_qmi_event_server_arrive() ath12k_qmi_host_cap_send() ath12k_qmi_event_mem_request() ath12k_qmi_respond_fw_mem_request() ath12k_qmi_event_load_bdf() ath12k_qmi_request_target_cap() ath12k_qmi_load_bdf_qmi() ath12k_qmi_wlanfw_m3_info_send() Mark all of those underlying functions as 'noinline_for_stack' to prevent them from being inlined in ath12k_qmi_driver_event_work(), thereby eliminating the excessive stack usage. Link: https://msgid.link/bc214795-1c51-4cb7-922f-67d6ef98bff2@quicinc.com # [1] Link: https://msgid.link/20241025223321.GA3647469@thelio-3990X # [2] Link: https://lore.kernel.org/all/?q=f:arnd@kernel.org+Wframe-larger-than # [3] Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241028-ath12k_qmi_driver_event_work-v1-1-0d532eb593fa@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-31Merge tag 'ath-next-20241030' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath ath.git patches for v6.13 This development cycle featured phase 1 of patches to ath12k to support the new 802.11be MLO feature, along with other ath12k feature patches. In older drivers, support for some additional devices were added. And there was the usual set of bug fixes and cleanups across most drivers. Per-driver highlights: ath12k * Switch to using wiphy_lock() and remove ar->conf_mutex * Convert struct ath12k_sta::update_wk to use struct wiphy_work * Add phase 1 of 802.11be MLO support * Add firmware coredump collection support * Add debugfs support for a multitude of statistics * Fix host representation of multiple hal_rx structs * Fix use-after-free in ath12k_dp_cc_cleanup() * Skip Rx TID cleanup for self peer * Fix warning and crash when unloading in a VM * Convert CE interrupt handling from tasklet to BH workqueue * Fix A-MSDU indication in monitor mode ath11k * Fix double free issue during SRNG deinit * Enable firmware diagnostic events for WCN6750 * Fix CE offset address calculation for WCN6750 during SSR * Fix stack frame size warning in ath11k_vif_wow_set_wakeups() * Document the inputs for ath11k on WCN6855 ath10k * Fix multiple stack frame size warnings * Fix invalid VHT parameters in supported_vht_mcs_rate_nss* structs * Avoid NULL pointer error during SDIO remove ath5k * Add support for Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A
2024-10-25wifi: ath12k: convert tasklet to BH workqueue for CE interruptsRaj Kumar Bhagat
Currently in Ath12k, tasklet is used to handle the BH context of CE interrupts. However the tasklet is marked deprecated and has some design flaws. To replace tasklets, BH workqueue support has been added. BH workqueue behaves similarly to regular workqueues except that the queued work items are executed in the BH context. Hence, convert the tasklet to BH workqueue for handling CE interrupts in the BH context. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241022072406.3231450-1-quic_rajkbhag@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-23wifi: ath12k: fix A-MSDU indication in monitor modeKang Yang
In monitor mode, host will reap MSDUs and then the MSDUs with same PPDU ID will be aggregated into an A-MSDU in ath12k_dp_mon_rx_merg_msdus(). However, ath12k_dp_mon_rx_merg_msdus() doesn't calculate the total length of the A-MSDU. This causes Wireshark to display the A-MSDU incorrectly. Therefore, need to add calculation of the A-MSDU length. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241022110831.974-9-quic_kangyang@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-23wifi: ath12k: use tail MSDU to get MSDU informationKang Yang
When receiving a packet in monitor mode, hardware will fill status information msdu_end for MSDUs. Then host can use these status information to get specific information about this packet, such as l3 offset, bandwidth, mcs, packet type. If this packet is composed of multiple MSDUs, then hardware will only fill status information for the last(tail) MSDU. At this time, MSDU information is uncertain for others MSDUs. But current code use the first MSDU in monitor mode, so will get the wrong information. Fix it by getting msdu information from last(tail) msdu. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241022110831.974-8-quic_kangyang@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-23wifi: ath12k: delete NSS and TX power setting for monitor vdevKang Yang
ath12k_mac_monitor_vdev_create() will set NSS and TX power to firmware for monitor vdev. But firmware doesn't need them for monitor mode. So delete them as a cleanup. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Link: https://patch.msgid.link/20241022110831.974-7-quic_kangyang@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-23wifi: ath12k: fix struct hal_rx_mpdu_startKang Yang
Current struct hal_rx_mpdu_start in hal_rx.h is not matched with hardware descriptor definition. This hardware descriptor definition is determined by hardware. Host shall follow it. So update struct hal_rx_mpdu_start and related code. Both QCN9274 and WCN7850 need this modification. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241022110831.974-6-quic_kangyang@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-23wifi: ath12k: fix struct hal_rx_phyrx_rssi_legacy_infoKang Yang
Current struct hal_rx_phyrx_rssi_legacy_info in hal_rx.h is not matched with hardware descriptor definition. This hardware descriptor definition is determined by hardware. Host shall follow it. So update struct hal_rx_phyrx_rssi_legacy_info and related code. Both QCN9274 and WCN7850 need this modification. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241022110831.974-5-quic_kangyang@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-23wifi: ath12k: fix struct hal_rx_ppdu_startKang Yang
Current struct hal_rx_ppdu_start in hal_rx.h is not matched with hardware descriptor definition. This hardware descriptor definition is determined by hardware. Host shall follow it. So update struct hal_rx_ppdu_start and related code. Both QCN9274 and WCN7850 need this modification. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Link: https://patch.msgid.link/20241022110831.974-4-quic_kangyang@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-23wifi: ath12k: fix struct hal_rx_ppdu_end_user_statsKang Yang
Current struct hal_rx_ppdu_end_user_stats in hal_rx.h is not matched with hardware descriptor definition. This hardware descriptor definition is determined by hardware. Host shall follow it. So update struct hal_rx_ppdu_end_user_stats and related code. Both QCN9274 and WCN7850 need this modification. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241022110831.974-3-quic_kangyang@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-23wifi: ath12k: remove unused variable monitor_presentKang Yang
Variable monitor_present is not used yet and will not be used in future monitor mode. So delete it as cleanup. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Link: https://patch.msgid.link/20241022110831.974-2-quic_kangyang@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-23wifi: mac80211: call rate_control_rate_update() for link STAJohannes Berg
In order to update the right link information, call the update rate_control_rate_update() with the right link_sta, and then pass that through to the driver's sta_rc_update() method. The software rate control still doesn't support it, but that'll be skipped by not having a rate control ref. Since it now operates on a link sta, rename the driver method. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241007144851.5851b6b5fd41.Ibdf50d96afa4b761dd9b9dfd54a1147e77a75329@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-22wifi: ath12k: fix warning when unbindingJose Ignacio Tornos Martinez
If there is an error during some initialization related to firmware, the buffers dp->tx_ring[i].tx_status are released. However this is released again when the device is unbinded (ath12k_pci), and we get: WARNING: CPU: 0 PID: 2098 at mm/slub.c:4689 free_large_kmalloc+0x4d/0x80 Call Trace: free_large_kmalloc ath12k_dp_free ath12k_core_deinit ath12k_pci_remove ... The issue is always reproducible from a VM because the MSI addressing initialization is failing. In order to fix the issue, just set the buffers to NULL after releasing in order to avoid the double free. cc: stable@vger.kernel.org Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Link: https://patch.msgid.link/20241017181004.199589-3-jtornosm@redhat.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-22wifi: ath12k: fix crash when unbindingJose Ignacio Tornos Martinez
If there is an error during some initialization related to firmware, the function ath12k_dp_cc_cleanup is called to release resources. However this is released again when the device is unbinded (ath12k_pci), and we get: BUG: kernel NULL pointer dereference, address: 0000000000000020 at RIP: 0010:ath12k_dp_cc_cleanup.part.0+0xb6/0x500 [ath12k] Call Trace: ath12k_dp_cc_cleanup ath12k_dp_free ath12k_core_deinit ath12k_pci_remove ... The issue is always reproducible from a VM because the MSI addressing initialization is failing. In order to fix the issue, just set to NULL the released structure in ath12k_dp_cc_cleanup at the end. cc: stable@vger.kernel.org Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Link: https://patch.msgid.link/20241017181004.199589-2-jtornosm@redhat.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
generated by cgit (git 2.34.1) at 2025-09-22 05:35:30 +0000