summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath12k
AgeCommit message (Collapse)Author
2024-05-20wifi: ath12k: dynamic VLAN supportMuna Sinada
Add support for dynamic VLAN. VLAN group traffic is encapsulated and encrypted in mac80211 and driver needs to set flags for the VLAN group traffic to skip hardware encapsulation and encryption. VLAN group traffic utilizes ext MSDU and HTT Metadata to set encapsulation type to RAW and encryption type to OPEN in order to inform firmware to skip hardware encapsulation and encryption. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240515192830.995013-1-quic_msinada@quicinc.com
2024-05-17wifi: ath12k: fix ack signal strength calculationLingbo Kong
Currently, the calculation of ack signal strength is incorrect. This is because before calculating the ack signal strength, ath12k need to determine whether the hardware and firmware support db2dbm. If the hardware and firmware support db2dbm, do not need to add noise floor, otherwise, need to add noise floor. Besides, the value of ack_rssi passed by firmware to ath12k should be a signed number, so change its type to s8. This patch affects QCN9274 and WCN7850 because they have the same issue. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240511030917.65811-1-quic_lingbok@quicinc.com
2024-05-16wifi: ath12k: use correct MAX_RADIOSKarthikeyan Periyasamy
The current value of the MAX_RADIOS definition is 3. This is incorrect because no device supports more than 2 radios. An incorrect MAX_RADIOS value can lead to: - unnecessary memory allocation for pdev related entities. - invalid pdev id validation. - Misconceptions for code readers. Therefore, modify the MAX_RADIOS definition as 2. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240514063412.3483723-3-quic_periyasa@quicinc.com
2024-05-16wifi: ath12k: remove duplicate definition of MAX_RADIOSKarthikeyan Periyasamy
Remove the duplicate definition of MAX_RADIOS from the core header file. No functional changes, compile tested only. Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240514063412.3483723-2-quic_periyasa@quicinc.com
2024-05-16wifi: ath12k: remove redundant peer delete for WCN7850Kang Yang
ath12k_mac_op_unassign_vif_chanctx() will do peer delete for WCN7850's monitor interface. But for host no need to do peer create/delete for monitor interface because firmware doesn't require it, QCN9274 is the same. Also, the first judgement is true only for WCN7850, so this logic won't affect QCN9274 at any time. So remove this peer delete. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240510111238.1113-1-quic_kangyang@quicinc.com
2024-05-16wifi: ath12k: Fix tx completion ring (WBM2SW) setup failureNithyanantham Paramasivam
We observe intermittent ping failures from the access point (AP) to station (STA) in any mode (AP-STA or Mesh) configured. Specifically, the transmission completion status is not received at tx completion ring id 4 (WBM2SW ring4) for the packets transmitted via TCL DATA ring id 3. This prevents freeing up tx descriptors and leads to buffer exhaustion. Currently, during initialization of the WBM2SW ring, we are directly mapping the ring number to the ring mask to obtain the ring mask group index. This approach is causing setup failures for WBM2SW ring 4. Similarly, during runtime, when receiving incoming transmission completion status, the validation of the ring number by mapping the interrupted ring mask. This is resulting in validation failure. Thereby preventing entry into the completion handler ath12k_dp_tx_completion_handler(). The existing design assumed that the ring numbers would always be sequential and could be directly mapped with the ring mask. However, this assumption does not hold true for WBM2SW ring 4. Therefore, modify the design such that, instead of mapping the ring number, the ring ID is mapped with the ring mask. According to this design: 1. During initialization of the WBM2SW ring, mapping the ring ID to the ring mask will ensure obtaining the correct ring mask group ID. 2. During runtime, validating the interrupted ring mask group ID within the transmission completion group is sufficient. This approach allows the ring ID to be derived from the interrupted ring mask and enables entry into the completion handler. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Nithyanantham Paramasivam <quic_nithp@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240510070427.206152-1-quic_nithp@quicinc.com
2024-05-16wifi: ath12k: skip sending vdev down for channel switchAloka Dixit
Remove the unnecessary WMI vdev down operation as firmware internally does so already as part of WMI vdev restart. Repeated vdev down results in a firmware crash during channel switch operation when multiple BSSID advertisements are enabled: ath12k_pci 0000:06:00.0: firmware crashed: MHI_CB_SYS_ERROR ath12k_pci 0000:06:00.0: failed to send WMI_VDEV_SET_PARAM_CMDID ath12k_pci 0000:06:00.0: failed to set vdev 5 HE MU mode: -108 param_value 7b ath12k_pci 0000:06:00.0: failed to set he mode vdev 5 ath12k_pci 0000:06:00.0: failed to restart vdev 5: -108 ath12k_pci 0000:06:00.0: failed to send WMI_VDEV_SET_PARAM_CMDID ath12k_pci 0000:06:00.0: failed to set vdev 4 HE MU mode: -108 param_value 7b ath12k_pci 0000:06:00.0: failed to set he mode vdev 4 ath12k_pci 0000:06:00.0: failed to restart vdev 4: -108 ath12k_pci 0000:06:00.0: failed to send WMI_VDEV_SET_PARAM_CMDID Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508202912.11902-10-quic_alokad@quicinc.com
2024-05-16wifi: ath12k: add EMA beacon supportAloka Dixit
Add new function ath12k_mac_setup_bcn_tmpl_ema() which retrieves a list of EMA (Enhanced Multi-BSSID Advertisements) beacon templates from mac80211 and sends all to firmware. Add support to send EMA configurations to firmware by adding a new parameter 'ema_params' in struct wmi_bcn_tmpl_cmd. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508202912.11902-9-quic_alokad@quicinc.com
2024-05-16wifi: ath12k: add MBSSID beacon supportAloka Dixit
- A single beacon template is used for one multiple BSSID group as only one interface from group transmits the beacons. But firmware requires the host to send this template each time a nontransmitted interface is brought up. Hence, modify existing logic to retrieve the template from vif context of the transmitting interface. Also, firmware crashes if host sends a template for a nontransmitted interface which is already up, add a check to avoid this. - Set rsnie_present and wpaie_present fields for nontransmitted VAPs. - Send offset to the multiple BSSID element in the beacon template firmware. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508202912.11902-8-quic_alokad@quicinc.com
2024-05-16wifi: ath12k: refactor arvif security parameter configurationAloka Dixit
Configure security parameters in a separate function to make it easier to support setting the same for nontransmitted profiles. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508202912.11902-7-quic_alokad@quicinc.com
2024-05-16wifi: ath12k: configure MBSSID parameters in AP modeAloka Dixit
Include MBSSID parameters in WMI vdev up operation. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508202912.11902-6-quic_alokad@quicinc.com
2024-05-16wifi: ath12k: create a structure for WMI vdev up parametersAloka Dixit
Host needs to send multiple BSSID configurations to firmware for each vdev in ath12k_wmi_vdev_up() for AP mode. This function accepts individual input parameters hence any new argument will require changes to all callers. Most of these will use default value (0 or NULL). Create a structure for the function arguments and include objects with all members initialized to zero to minimize future changes. Tested-on : QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508202912.11902-5-quic_alokad@quicinc.com
2024-05-16wifi: ath12k: rename MBSSID fields in wmi_vdev_up_cmdAloka Dixit
Rename trans_bssid to tx_vdev_bssid to make it similar to vdev_bssid. Rename profile_num to nontx_profile_cnt, and profile_idx to nontx_profile_idx which make it clear that these configurations correspond to nontransmitted MBSSID profiles. These members are currently unused in the driver. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508202912.11902-4-quic_alokad@quicinc.com
2024-05-16wifi: ath12k: configure MBSSID params in vdev create/startAloka Dixit
Configure multiple BSSID flags and vdev_id of the transmited profile in vdev create/start commands depending on the service bit WMI_TLV_SERVICE_MBSS_PARAM_IN_VDEV_START_SUPPORT. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508202912.11902-3-quic_alokad@quicinc.com
2024-05-16wifi: ath12k: advertise driver capabilities for MBSSID and EMAAloka Dixit
Advertise the driver support for multiple BSSID (MBSSID) and enhanced multi-BSSID advertisements (EMA) by setting extended capabilities. Configure mbssid_max_interfaces and ema_max_profile_periodicity fields in structure wiphy which are used to advertise maximum number of interfaces and profile periodicity supported by the driver. Add new WMI fields to configure maximum vdev count supported for MBSSID and profile periodicity in case of EMA. Set WMI_RSRC_CFG_FLAGS2_CALC_NEXT_DTIM_COUNT_SET flag to allow firmware to track and update the DTIM counts for each nontransmitted profile. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508202912.11902-2-quic_alokad@quicinc.com
2024-05-16wifi: ath12k: support SMPS configuration for 6 GHzPradeep Kumar Chitrapu
Parse SMPS configuration from IEs and configure. Without this, SMPS is not enabled for 6 GHz band. This is disabled for WCN7850 as hardware does not support it. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508173655.22191-7-quic_pradeepc@quicinc.com
2024-05-16wifi: ath12k: refactor SMPS configurationPradeep Kumar Chitrapu
Move fetching SMPS value to a new function and use u16_get_bits to extract it from capabilities. This will help in extending the functionality when SMPS support in 6 GHz band gets added in subsequent patches. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508173655.22191-6-quic_pradeepc@quicinc.com
2024-05-16wifi: ath12k: add 6 GHz params in peer assoc commandPradeep Kumar Chitrapu
Currently A-MPDU aggregation parameters are not being configured during peer association for 6 GHz band. Hence, extract these parameters from station's capabilities received in association request and send to firmware. Without this, A-MPDU aggregation is not happening in 6 GHz band. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Co-developed-by: Avula Sri Charan <quic_asrichar@quicinc.com> Signed-off-by: Avula Sri Charan <quic_asrichar@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508173655.22191-5-quic_pradeepc@quicinc.com
2024-05-16wifi: ath12k: fix survey dump collection in 6 GHzPradeep Kumar Chitrapu
When ath12k receives survey request, choose the 6 GHz band when enabled. Without this, survey requests do not include any 6 GHz band results, leading to failures in auto channel selection. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508173655.22191-4-quic_pradeepc@quicinc.com
2024-05-16wifi: ath12k: Correct 6 GHz frequency value in rx statusPradeep Kumar Chitrapu
The frequency in the rx status is currently being filled incorrectly for the 6 GHz band. The channel number received is invalid in this case, resulting in packet drops. Fix this issue by correcting the frequency calculation. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508173655.22191-3-quic_pradeepc@quicinc.com
2024-05-16wifi: ath12k: add channel 2 into 6 GHz channel listPradeep Kumar Chitrapu
Add support for the 6 GHz channel 2 with center frequency 5935 MHz and operating class 136 per IEEE Std 802.11ax-2021, Table E-4. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508173655.22191-2-quic_pradeepc@quicinc.com
2024-05-13wifi: ath12k: allocate dummy net_device dynamicallyBreno Leitao
Embedding net_device into structures prohibits the usage of flexible arrays in the net_device structure. For more details, see the discussion at [1]. Un-embed the net_device from struct ath12k_ext_irq_grp by converting it into a pointer. Then use the leverage alloc_netdev_dummy() to allocate the net_device object at ath12k_pci_ext_irq_config(). The free of the device occurs at ath12k_pci_free_ext_irq(). Link: https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/ [1] Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508095410.1923198-1-leitao@debian.org
2024-05-13wifi: ath12k: initialize 'ret' in ath12k_dp_rxdma_ring_sel_config_wcn7850()Jeff Johnson
smatch flagged the following issue: drivers/net/wireless/ath/ath12k/dp_rx.c:4065 ath12k_dp_rxdma_ring_sel_config_wcn7850() error: uninitialized symbol 'ret'. In ath12k_dp_rxdma_ring_sel_config_wcn7850() if it were ever the case that ab->hw_params->num_rxdma_per_pdev was 0 then 'ret' would be uninitialized when it is returned. This should never be the case, but to be safe and to quiet smatch, add an initializer to the declaration of 'ret'. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240504-ath12k_dp_rxdma_ring_sel_config_wcn7850-ret-v1-2-44d2843a2857@quicinc.com
2024-05-13wifi: ath12k: fix misspelling of "dma" in num_rxmda_per_pdevJeff Johnson
The ath12k_hw_params member num_rxmda_per_pdev contains a misspelling of "dma" so fix it. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240504-ath12k_dp_rxdma_ring_sel_config_wcn7850-ret-v1-1-44d2843a2857@quicinc.com
2024-05-13wifi: ath12k: avoid double SW2HW_MACID conversionKarthikeyan Periyasamy
Currently, ath12k_wmi_pdev_dma_ring_cfg() fails due to an invalid pdev_id parameter passed to the WMI_PDEV_DMA_RING_CFG_REQ_CMDID WMI command. This invalid pdev_id is caused by a double conversion of the MAC ID. Since the the caller of ath12k_wmi_pdev_dma_ring_cfg() already performs the MAC ID conversion, it is unnecessary to do it again within the function. To fix this, remove the software (SW) to hardware (HW) MAC ID conversion from ath12k_wmi_pdev_dma_ring_cfg() to avoid this redundant conversion. Found in code review. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240506173017.597715-1-quic_periyasa@quicinc.com
2024-05-13wifi: ath12k: initialize 'ret' in ath12k_qmi_load_file_target_mem()Jeff Johnson
smatch flagged the following issue: drivers/net/wireless/ath/ath12k/qmi.c:2619 ath12k_qmi_load_file_target_mem() error: uninitialized symbol 'ret'. The reality is that 'ret' is initialized in every path through ath12k_qmi_load_file_target_mem() except one, the case where the input 'len' is 0, and hence the "while (remaining)" loop is never entered. But to make sure this case is also handled, add an initializer to the declaration of 'ret'. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240504-qmi_load_file_target_mem-v1-1-069fc44c45eb@quicinc.com
2024-05-07wifi: ath12k: remove invalid peer create logicKang Yang
In ath12k_mac_op_assign_vif_chanctx(), there is a logic to create peer using ar->mac_addr for a STA vdev. This is invalid because a STA vdev should have a peer created using AP's MAC address. Besides, if we run into that logic, it means a peer has already been created earlier, we should not create it again. So remove it. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240429081525.983-6-quic_kangyang@quicinc.com
2024-05-07wifi: ath12k: avoid duplicated vdev downKang Yang
ath12k_mac_op_unassign_vif_chanctx() will do vdev down in function ath12k_mac_monitor_stop(). So no need to do vdev down again. remove the duplicated one. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240429081525.983-4-quic_kangyang@quicinc.com
2024-05-07wifi: ath12k: avoid duplicated vdev stopKang Yang
ath12k_mac_op_unassign_vif_chanctx() will do vdev stop in ath12k_mac_monitor_stop(). This ath12k_mac_vdev_stop() will do vdev stop again, then might trigger firmware crash. So add judgement to avoid duplicated vdev stop. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: c9e4e41e71ff ("wifi: ath12k: move peer delete after vdev stop of station for WCN7850") Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240429081525.983-3-quic_kangyang@quicinc.com
2024-05-07wifi: ath12k: remove unused variable monitor_flagsKang Yang
monitor_flags is defined in struct ath12k. Although it is changed in some places, but it is not actually used. So remove related code. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240429081525.983-2-quic_kangyang@quicinc.com
2024-05-07wifi: ath12k: Remove unused tcl_*_ring configurationTamizh Chelvam Raja
Currently memory allocation for multiple hardware rings done in host as these memory will be used by firmware/hardware. But in case of tcl_cmd_ring and tcl_status_ring neither firmware nor hardware uses host allocated memory and it uses memory allocated by firmware itself. So avoid tcl_cmd_ring and tcl_status_ring setup in host. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240430091414.2486196-4-quic_tamizhr@quicinc.com
2024-05-07wifi: ath12k: Remove unsupported tx monitor handlingTamizh Chelvam Raja
Currently tx monitor is not supported in driver. So remove the tx monitor ring configuration, allocation and handling. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240430091414.2486196-3-quic_tamizhr@quicinc.com
2024-05-07wifi: ath12k: fix calling correct function for rx monitor modeTamizh Chelvam Raja
Currently in ath12k_dp_tx_htt_monitor_mode_ring_config() ath12k_dp_tx_htt_tx_monitor_mode_ring_config() function wrongly called twice. Fix that by calling ath12k_dp_tx_htt_rx_monitor_mode_ring_config(). Currently monitor mode is disabled in driver so the change is compile tested and boot sequence verified. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240430091414.2486196-2-quic_tamizhr@quicinc.com
2024-05-03wifi: ath12k: drop failed transmitted frames from metric calculation.Karthikeyan Kathirvel
In mesh node traffic, internal firmware-transmitted failures are reported as transmitted failures in mesh metric calculation, leading to the breakage of the mesh link. Fix the issue by dropping the internal firmware-transmitted failures before updating the TX completion status to mac80211, in order to prevent false failure averaging in mesh metric calculation. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240430074313.885807-3-quic_kathirve@quicinc.com
2024-05-03wifi: ath12k: Don't drop tx_status in failure caseSven Eckelmann
When a station idles for a long time, hostapd will try to send a QoS Null frame to the station as "poll". NL80211_CMD_PROBE_CLIENT is used for this purpose. And the skb will be added to ack_status_frame - waiting for a completion via ieee80211_report_ack_skb(). But when the peer was already removed before the tx_complete arrives, the peer will be missing. And when using dev_kfree_skb_any (instead of going through mac80211), the entry will stay inside ack_status_frames thus not clean up related information in its internal data structures. This IDR will therefore run full after 8K request were generated for such clients. At this point, the access point will then just stall and not allow any new clients because idr_alloc() for ack_status_frame will fail. ieee80211_free_txskb() on the other hand will (when required) call ieee80211_report_ack_skb() and make sure that (when required) remove the entry from the ack_status_frame and clean up related information in its internal data structures. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com> Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Link: https://lore.kernel.org/r/20230802-ath11k-ack_status_leak-v2-1-c0af729d6229@narfation.org Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240430074313.885807-2-quic_kathirve@quicinc.com
2024-05-03wifi: ath12k: add multi device support for WBM idle ring buffer setupKarthikeyan Periyasamy
Currently, inter device MLO is not supported. Therefore, the WBM idle ring buffers choose the implicit return buffer manager (DEV0_IDLE_DESC_LIST). However, this implicit return buffer manager design is not meeting the requirements to support inter device MLO. In inter device MLO, multiple devices participate. The device specific WBM idle ring buffers transmit to multiple device REO rings. To distinguish between device specific WBM idle buffers, the setup configuration need to choose a different return buffer manager based on the unique identifier (device index). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240430165811.1377182-5-quic_periyasa@quicinc.com
2024-05-03wifi: ath12k: Introduce device indexKarthikeyan Periyasamy
Introduce a device index parameter in the ath12k_base structure. This value is used as unique identifier for devices involved in Inter-device MLO. It is also used to configure the MLO parameter within the QMI host capability send request. While currently set to zero, future logic will be added for inter device support to populate this parameter with non-zero values. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240430165811.1377182-4-quic_periyasa@quicinc.com
2024-05-03wifi: ath12k: Refactor idle ring descriptor setupKarthikeyan Periyasamy
Currently, the WBM idle ring descriptor setup uses implicit value HAL_RX_BUF_RBM_WBM_DEV0_IDLE_DESC_LIST for the return buffer manager parameter. To support inter-device MLO (Multi-link operation), this parameter needs to be configure dynamically based on the device identifier within the MLO group. Therefore, introduce a new argument to the helper function ath12k_hal_set_link_desc_addr(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240430165811.1377182-3-quic_periyasa@quicinc.com
2024-05-03wifi: ath12k: Replace "chip" with "device" in hal Rx return buffer managerKarthikeyan Periyasamy
Prefer the term "device" over "chip". Therefore, modify the relevant terms in hal Rx return buffer manager to use "device" instead. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240430165811.1377182-2-quic_periyasa@quicinc.com
2024-05-03wifi: ath12k: Add lock to protect the hardware stateKarthikeyan Periyasamy
Currently, hardware state is not protected across the reconfigure operations. However, in single wiphy models, multiple radio/links is exposed as a MAC hardware (ieee80211_hw) through the driver hardware abstraction (ath12k_hw) layer. In such scenario, we need to protect hardware state across the multiple radio/link at the driver hardware abstraction (ath12k_hw) layer. Therefore, introduce a new mutex in the ath12k_hw layer. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240425090307.3233434-4-quic_periyasa@quicinc.com
2024-05-03wifi: ath12k: Refactor the hardware stateKarthikeyan Periyasamy
Currently, in multi wiphy models, the mac80211 hardware state is maintained within the radio/link structure. However, in single wiphy models, the mac80211 hardware state is needed at the hardware abstraction layer (ath12k_hw). Therefore, move the hardware state from the radio/link structure to the hardware abstraction layer (ath12k_hw). Additionally, update the naming convention of the state enums to enhance clarity and consistency. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240425090307.3233434-3-quic_periyasa@quicinc.com
2024-05-03wifi: ath12k: Refactor the hardware recovery procedureKarthikeyan Periyasamy
Currently, in multi-wiphy models, the recovery handler access mac80211 HW from the radio/link structure. This will be incorrect for single wiphy model, as they will hold multiple link/radio structures. To fix this, access mac80211 HW based on the number of hardware in the SoC/chip. This approach makes the recovery handler compatible with both multi wiphy and single wiphy models. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240425090307.3233434-2-quic_periyasa@quicinc.com
2024-05-02wifi: ath12k: fix the problem that down grade phy mode operationLingbo Kong
Currently, when using WCN7850 or QCN9274 as AP, ath12k always performs down grade phy mode operation regardless of whether the firmware supports EHT capability or not and then vdev will start in HE mode. When stations that support EHT capability try to connect to the AP, the AP will set phy mode to EHT after receiving the association request packet, and then send WMI_PEER_ASSOC_CMDID command to firmware, AP’s firmware will crash. This is because when the ath12k_mac_copy_sband_iftype_data() function handles EHT capability, it does not copy the EHT capability into the iftype[band][type] array according to the interface type. So, interface type should not be used as an index to get eht_cap in ath12k_mac_check_down_grade_phy_mode() function. To address this issue, use types_mask to select the eht_cap in ath12k_mac_check_down_grade_phy_mode() function. This patch affects QCN9274 and WCN7850 because they have the same issue. Hostapd log: wlo1: STA 02:03:7f:37:12:34 IEEE 802.11: Could not set STA to kernel driver Kernel log: [270894.816076] ath12k_pci 0000:03:00.0: failed to send WMI_PEER_SET_PARAM cmd [270894.816111] ath12k_pci 0000:03:00.0: failed to setup peer SMPS for vdev 0: -108 [270894.816122] ath12k_pci 0000:03:00.0: Failed to associate station: 02:03:7f:37:12:34 [270894.843389] ieee80211 phy5: Hardware restart was requested [270894.843517] ath12k_pci 0000:03:00.0: failed to lookup peer 02:03:7f:37:12:34 on vdev 0 [270894.843616] ath12k_pci 0000:03:00.0: failed to send WMI_PEER_DELETE cmd [270894.843650] ath12k_pci 0000:03:00.0: failed to delete peer vdev_id 0 addr 02:03:7f:37:12:34 ret -108 [270894.843663] ath12k_pci 0000:03:00.0: Failed to delete peer: 02:03:7f:37:12:34 for VDEV: 0 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240425083837.5340-1-quic_lingbok@quicinc.com
2024-04-30wifi: ath12k: fix flush failure in recovery scenariosBaochen Qiang
Commit eaf9f17b861b ("wifi: ath12k: relocate ath12k_dp_pdev_pre_alloc() call") moves ath12k_dp_pdev_pre_alloc() from ath12k_core_start() to ath12k_mac_allocate(), resulting in ath12k_mac_flush() failure in recovery scenarios: [ 6849.684104] ath12k_pci 0000:04:00.0: pdev 0 successfully recovered [ 6854.907320] ath12k_pci 0000:04:00.0: failed to flush transmit queue 0 [ 6860.027353] ath12k_pci 0000:04:00.0: failed to flush transmit queue 0 [ 6865.143385] ath12k_pci 0000:04:00.0: failed to flush transmit queue 0 This is because, with ath12k_dp_pdev_pre_alloc() moved to ath12k_mac_allocate(), dp->num_tx_pending is not reset due to ATH12K_FLAG_REGISTERED set in recovery scenarios. So a possible fix would be to reset that counter at some proper point, just like the old design. But considering that the counter tracks number of packets pending to be freed or returned to mac80211, forcefully reset it might make it hard to expose some real issues. For example if somehow ath12k fails to free/return some TX packets, we don't know that because no warnings any more. That is to say we should not reset that counter during recovery (which is already done due to above commit), instead should decrease it each time a packet is freed/returned. Currently almost each related function has this logic implemented, except ath12k_dp_cc_cleanup(). So add the same there to fix this issue. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240426015434.94840-1-quic_bqiang@quicinc.com
2024-04-30wifi: ath12k: check M3 buffer size as well whey trying to reuse itBaochen Qiang
Currently in recovery/resume cases, we do not free M3 buffer but instead will reuse it. This is done by checking m3_mem->vaddr: if it is not NULL we believe M3 buffer is ready and go ahead to reuse it. Note that m3_mem->size is not checked. This is safe for now because currently M3 reuse logic only gets executed in recovery/resume cases and the size keeps unchanged in either of them. However ideally the size should be checked as well, to make the code safer. So add the check there. Now if that check fails, free old M3 buffer and reallocate a new one. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Fixes: 303c017821d8 ("wifi: ath12k: fix kernel crash during resume") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240425021740.29221-1-quic_bqiang@quicinc.com
2024-04-24wifi: ath12k: set mlo_capable_flags based on QMI PHY capabilityRaj Kumar Bhagat
Currently, mlo_capable_flags is set to zero if dualmac device is detected based on One Time Programmable (OTP) register value. This is not generic and in future dualmac devices may support Single Link Operation (SLO) and Multi Link Operation (MLO). Thus, set mlo_capable_flags based on 'single_chip_mlo_support' parameter from QMI PHY capability response message from the firmware. Also, add check on mlo_capable_flags to disable MLO parameter in the host capability QMI request message. If the firmware does not respond with this optional parameter 'single_chip_mlo_support' in QMI PHY capability response, default ab->mlo_capable_flags is used. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1 Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240418125609.3867730-3-quic_rajkbhag@quicinc.com
2024-04-24wifi: ath12k: read single_chip_mlo_support parameter from QMI PHY capabilityRaj Kumar Bhagat
New parameter 'single_chip_mlo_support' was added in QMI PHY capability response message. This is an optional parameter added in QCN9274 firmware. This parameter states if the firmware supports Single-Link Operation (SLO) and Multi-Link Operation (MLO) within the same device. If single_chip_mlo_support = 1, then intra device SLO/MLO is supported in the firmware. If single_chip_mlo_support = 0, then intra device SLO/MLO is not supported in the firmware. Hence, add support to read 'single_chip_mlo_support' parameter from the QMI PHY capability response message. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1 Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240418125609.3867730-2-quic_rajkbhag@quicinc.com
2024-04-24wifi: ath12k: add support to handle beacon miss for WCN7850Kang Yang
When AP goes down or too far away without indication to STA, beacon miss will be detected. Then for WCN7850's firmware, it will use roam event to send beacon miss to host. If STA doesn't handle the beacon miss, will keep the fake connection and unable to roam. So add support for WCN7850 to trigger disconnection from AP when receiving this event from firmware. It has to be noted that beacon miss event notification for QCN9274 to be handled in a separate patch as it uses STA kickout WMI event to notify beacon miss and the current STA kickout event is processed as low_ack. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Reviewed-by: Nicolas Escande <nico.escande@gmail.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240412094447.2063-1-quic_kangyang@quicinc.com
2024-04-23wifi: ath12k: ACPI band edge channel power supportLingbo Kong
Currently, ath12k does not have the ability to set band edge channel power for WCN7850. In order to support this, ath12k gets band edge channel power table in ath12k_acpi_dsm_get_data() function and sets pdev_id and param_type_id, then finally sends these data and WMI_PDEV_SET_BIOS_INTERFACE_CMDID to firmware to set band edge channel power. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240422033054.979-5-quic_lingbok@quicinc.com
2024-04-23wifi: ath12k: ACPI CCA threshold supportLingbo Kong
Currently, ath12k does not have the ability to adjust Clear Channel Assessment (CCA) threshold values to meet the regulatory requirements. Get the values from ACPI and send them to the firmware using ath12k_wmi_set_bios_cmd() function. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240422033054.979-4-quic_lingbok@quicinc.com
generated by cgit (git 2.34.1) at 2025-09-22 23:51:10 +0000