summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2011-02-21rt2x00: Remove superfluos empty lineHelmut Schaa
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21Revert "rt2x00 : avoid timestamp for monitor injected frame."Helmut Schaa
This reverts commit e81e0aef32bfa7f593b14479b9c7eaa7196798ac "rt2x00 : avoid timestamp for monitor injected frame." as it breaks proper timestamp insertion into probe responses injected by hostapd for example. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Cc: Benoit PAPILLAULT <benoit.papillault@free.fr> Cc: Alban Browaeys <prahal@yahoo.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rt2x00: Minor optimization for devices with RTS/CTS offloadHelmut Schaa
Only devices that don't have RTS/CTS offload need to check for IEEE80211_TX_RC_USE_RTS_CTS and IEEE80211_TX_RC_USE_CTS_PROTECT. By swapping both conditions we keep the same number of needed conditionals for devices without RTS/CTS offload but save one conditional on devices with RTS/CTS offload. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rt2x00: Fix rt2800 txpower setting to correct valueRA-Jay Hung
TX_PWR_CFG_* setting need to consider below cases -compesate 20M/40M tx power delta for 2.4/5GHZ band -limit maximum EIRP tx power to power_level of regulatory requirement Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rt2x00: Add antenna setting for RT3070/RT3090/RT3390 with RX antenna ↵RA-Jay Hung
diversity support For RT3070/RT3090/RT3390 with RX antenna diversity support, we must select default antenna using gpio control way even if we do not turn on antenna diversity feature. Seperate the meaning of TX/RX chain and antenna. Some chips use 2x2 TX/RX chain but may have 3 RX antennas or 1x1 TX/RX chain but may have 2 RX antennas to do antenna diversity. Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: Remove obsolete/unused macrosLarry Finger
The original code has many macros that are no longer needed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: rtl8192ce: Fix endian warningsLarry Finger
Drivers rtlwifi, and rtl8192ce generate a large number of sparse warnings. This patch fixes most of them. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: Modify build system for rtl8192cuLarry Finger
Modify Kconfig and Makefile to build rtl8192cu. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: rtl8192cu: Add routine trxGeorge
Add routine rtlwifi/rtl8192cu/trx.c. This routine differs from the rtl8192ce file of the same name. Signed-off-by: George <george0505@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: rtl8192cu: Add routine tableGeorge
Add rtlwifi/rtl8192cu/table.c. These tables are different than the ones used in rtl8192ce. Signed-off-by: George <george0505@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: rtl8192cu: Add routine rfGeorge
Add rtlwifi/rtl8192cu/rf.c. This routine is distinct from the one in rtl8192ce with the same name. Signed-off-by: George <george0505@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: rtl8192cu: Add routine phyGeorge
Add the routine rtlwifi/rtl8192cu/phy.c. Most of the code is included from rtlwifi/rtl8192c/phy_common.c. Signed-off-by: George <george0505@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: rtl8192cu: Add routine macGeorge
Add the routine rtlwifi/rtl8192cu/hw.c. Signed-off-by: George <george0505@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: rtl8192cu: Add routine hwGeorge
Add the routine rtlwifi/rtl8192cu/hw.c. This one is distinct from the routine of the same name in rtl8192ce. Signed-off-by: George <george0505@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: rtl8192cu: Add routines dm, fw, led and swGeorge
Add the rtlwifi/rtl8192cu routines for dm.c, fw.c, led.c and sw.c. Where possible, these routines use the corresponding code in rtl8192ce. Signed-off-by: George <george0505@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: Move common parts of rtl8192ce/phy.cLarry Finger
Move common routines from rtlwifi/rtl8192ce/phy.c and .../rtl8192cu/phy.c into rtlwifi/rtl8192c/phy_common.c. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: Modify wifi.h for rtl8192cuLarry Finger
Further merge of parameters needed for rtl8192cu. In addition, some changes needed for rtl8192se and rtl8192de are included and additional Hungarian notation is removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: Add headers for rtl8187cuGeorge
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: George <george0505@realtek.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: Modify some rtl8192ce routines for merging rtl8192cuLarry Finger
Modify some rtl8192ce routines for merging with rtl8192cu. In addition, remove some usage of Hungarian notation. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: Make changes in rtlwifi/rtl8192ce/def.h to support rtl8192cuLarry Finger
This change modifies rtlwifi/rtl8192ce/def.h to handle rtl8192cu. In addition, a couple of routines needed for both drivers are converted to be inline. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: Make changes in rtlwifi/rtl8192ce/reg.h to support rtl8192cuLarry Finger
This change modifies rtlwifi/rtl8192ce/reg.h to support rtl8192cu. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21ath9k: Implement op_flush()Vasanthakumar Thiagarajan
When op_flush() is called with no drop (drop=false), the driver tries to tx as many frames as possible in about 100ms on every hw queue. During this time period frames from sw queue are also scheduled on to respective hw queue. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21wl12xx: fix sdio_test kconfig/build errorsRandy Dunlap
The wl12xx sdio_test code uses wl12xx_get_platform_data, which is only present when WL12*_SDIO is enabled, so make WL12XX_SDIO_TEST depend on WL12XX_SDIO so that the needed interface will be present. sdio_test.c:(.devinit.text+0x13178): undefined reference to `wl12xx_get_platform_data' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Luciano Coelho <luciano.coelho@nokia.com> Cc: Roger Quadros <roger.quadros@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21ath5k: Enable AR2315 chipset recognitionWojciech Dubowik
Enable recognition of AR2315 chipsets in ath5k driver. Reported-by: Simon Morgenthaler <s.morgenthaler@students.unibe.ch> Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21ar9170usb: mark the old driver as obsoleteChristian Lamparter
AR9170USB will be replaced by carl9170 in the foreseeable future [2.6.40]. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21p54pci: update receive dma buffers before and after processingChristian Lamparter
Documentation/DMA-API-HOWTO.txt states: "DMA transfers need to be synced properly in order for the cpu and device to see the most uptodate and correct copy of the DMA buffer." Cc: <stable@kernel.org> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rt2x00: Fix WPA TKIP Michael MIC failures.Gertjan van Wingerde
As reported and found by Johannes Stezenbach: rt2800{pci,usb} do not report the Michael MIC in RXed frames, but do check the Michael MIC in hardware. Therefore we have to report to mac80211 that the received frame does not include the Michael MIC. https://bugzilla.kernel.org/show_bug.cgi?id=16608 Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21iwlagn: Support new 5000 microcode.Fry, Donald H
New iwlwifi-5000 microcode requires driver support for API version 5. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-21ath5k: Fix fast channel switchingNick Kossifidis
Fast channel change fixes: a) Always set OFDM timings b) Don't re-activate PHY c) Enable only NF calibration, not AGC https://bugzilla.kernel.org/show_bug.cgi?id=27382 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21iwlwifi: split the drivers for agn and legacy devices 3945/4965Wey-Yi Guy
Intel WiFi devices 3945 and 4965 now have their own driver in the folder drivers/net/wireless/iwlegacy Add support to build these drivers independently of the driver for AGN devices. Selecting the 3945 builds iwl3945.ko and iwl_legacy.ko, and selecting the 4965 builds iwl4965.ko and iwl_legacy.ko. iwl-legacy.ko contains code shared between both devices. The 3945 is an ABG/BG device, with no support for 802.11n. The 4965 is a 2x3 ABGN device. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Acked-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-21Revert "iwlwifi: split the drivers for agn and legacy devices 3945/4965"Wey-Yi Guy
This reverts commit aa833c4b1a928b8d3c4fcc2faaa0d6b81ea02b56.
2011-02-21iwlwifi: split the drivers for agn and legacy devices 3945/4965Wey-Yi Guy
Intel WiFi devices 3945 and 4965 now have their own driver in the folder drivers/net/wireless/iwlegacy Add support to build these drivers independently of the driver for AGN devices. Selecting the 3945 builds iwl3945.ko and iwl_legacy.ko, and selecting the 4965 builds iwl4965.ko and iwl_legacy.ko. iwl-legacy.ko contains code shared between both devices. The 3945 is an ABG/BG device, with no support for 802.11n. The 4965 is a 2x3 ABGN device. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Acked-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-21iwlwifi: enable 2-wire bt coex support for non-combo deviceWey-Yi Guy
For non-combo devices, 2-wire BT coex is needed to make sure BT coex still function with external BT devices Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-21iwlwifi: Loading correct uCode again when fail to loadWey-Yi Guy
During uCode loading, if the reply_alive come back with "failure", try to load the same uCode again. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-21iwlwifi: Limit number of firmware reloadWey-Yi Guy
If device has serious problem and cause firmware can not recover itself. Keep reloading firmware will not help, it can only fill up the syslog and lock up the system because busy reloading. Introduce the limit reload counter, if the reload reach the maximum within the pre-defined duration;stop the reload operation. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-21Merge branch 'master' into for-2.6.39Tejun Heo
2011-02-19Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: Documentation/feature-removal-schedule.txt drivers/net/e1000e/netdev.c net/xfrm/xfrm_policy.c
2011-02-18Merge ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville
Conflicts: drivers/bluetooth/ath3k.c drivers/bluetooth/btusb.c
2011-02-18ath9k_hw: Updates for AR9485 1.1 chipsets.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ath9k_htc: Fix a compilation warning.Vivek Natarajan
Initialize caldata to avoid compilation warning. CC [M] drivers/net/wireless/ath/ath9k/htc_drv_main.o drivers/net/wireless/ath/ath9k/htc_drv_main.c: In function ‘ath9k_htc_config’: drivers/net/wireless/ath/ath9k/htc_drv_main.c:172: warning: ‘caldata’ may be used uninitialized in this function drivers/net/wireless/ath/ath9k/htc_drv_main.c:172: note: ‘caldata’ was declared here Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18p54: implement flush callbackChristian Lamparter
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18p54: Fix compile warningLarry Finger
If any of the p54-based drivers are built with CONFIG_P54_LEDS not defined, the following warning is generated: CC [M] drivers/net/wireless/p54/main.o drivers/net/wireless/p54/main.c: In function ‘p54_register_common’: drivers/net/wireless/p54/main.c:614:21: warning: unused variable ‘priv’ Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ath5k: move external function definitions to a header fileBob Copeland
Johannes pointed out the mess of external function prototypes in the mac80211-ops.c file. Woe to anyone who changes these functions... Signed-off-by: Bob Copeland <me@bobcopeland.com> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ath5k: Correct channel setting for AR2317 chipNikolay Ledovskikh
Correct channel setting function must be used for AR2317. When I tested ahb patch on bullet2 all seemed to work fine, but it couldn't connect another host (using ibss for example). During an analysis I observed that it's transmitting on another channel. I looked into madwifi code and understood that the problem is in channel setting function. So atheros RF2317 not fully handled in the current ath5k version and must be patched. Signed-off-by: Nikolay Ledovskikh <nledovskikh@gmail.com> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18wireless: rt2x00: rt2800pci.c: add two idsXose Vazquez Perez
taken two RT35XX EDIMAX from DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217 Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-15ath9k: Fix ath9k prevents CPU to enter C3 statesMohammed Shafi Shajakhan
The DMA latency issue is observed only in Intel pinetrail platforms but in the driver we had a default PM-QOS value of 55. This caused unnecessary power consumption and battery drain in other platforms. Remove the pm-qos thing in the driver code and address the throughput issue in Intel pinetrail platfroms in user space using any one of the scripts in below links: http://www.kernel.org/pub/linux/kernel/people/mcgrof/scripts/cpudmalatency.c http://johannes.sipsolutions.net/files/netlatency.c.txt More details can be found in the following bugzilla link: https://bugzilla.kernel.org/show_bug.cgi?id=27532 This reverts the following commits: 98c316e348bedffa730e6f1e4baeb8a3c3e0f28b 4dc3530df7c0428b41c00399a7ee8c929406d181 10598c124ecabbbfd7522f74de19b8f7d52a1bee Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14iwlwifi: Delete iwl3945_good_plcp_health.David S. Miller
Fixes this build warning: drivers/net/wireless/iwlwifi/iwl-3945.c:411:13: warning: 'iwl3945_good_plcp_health' defined but not used As per Johannes Berg. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-14p54spi: update sample eepromChristian Lamparter
Commit: "p54: enhance rssi->dBm database import" changed the way how the driver deals with the rssical data. A new data format was necessary and hence this patch. NOTE: (for users with a custom eeprom binary) I spent some time updating p54tools to support the new format too: => (git available from) http://git.kernel.org/?p=linux/kernel/git/chr/p54tools.git It now comes with a simplistic script "n800_rssi2v2.sh" which can be used to automate the conversion. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14p54: enhance rssi->dBm database importChristian Lamparter
This patch fixes several shortcomings of the previous implementation. Features of the rewrite include: * handles undocumented "0x0000" word at the start of the frequency table. (Affected some early? DELL 1450 USB devices and my Symbol 5GHz miniPCI card.) * supports more than just one reference point per band. (Also needed for the Symbol card.) * ships with default values in case the eeprom data is damaged, absent or unsupported. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
generated by cgit (git 2.34.1) at 2025-09-12 04:11:50 +0000