summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2025-07-07wifi: mt76: mt7921: prevent decap offload config before STA initializationDeren Wu
The decap offload configuration should only be applied after the STA has been successfully initialized. Attempting to configure it earlier can lead to corruption of the MAC configuration in the chip's hardware state. Add an early check for `msta->deflink.wcid.sta` to ensure the station peer is properly initialized before proceeding with decapsulation offload configuration. Cc: stable@vger.kernel.org Fixes: 24299fc869f7 ("mt76: mt7921: enable rx header traslation offload") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Link: https://patch.msgid.link/f23a72ba7a3c1ad38ba9e13bb54ef21d6ef44ffb.1748149855.git.deren.wu@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-07-07wifi: mt76: mt7925: prevent NULL pointer dereference in ↵Deren Wu
mt7925_sta_set_decap_offload() Add a NULL check for msta->vif before accessing its members to prevent a kernel panic in AP mode deployment. This also fix the issue reported in [1]. The crash occurs when this function is triggered before the station is fully initialized. The call trace shows a page fault at mt7925_sta_set_decap_offload() due to accessing resources when msta->vif is NULL. Fix this by adding an early return if msta->vif is NULL and also check wcid.sta is ready. This ensures we only proceed with decap offload configuration when the station's state is properly initialized. [14739.655703] Unable to handle kernel paging request at virtual address ffffffffffffffa0 [14739.811820] CPU: 0 UID: 0 PID: 895854 Comm: hostapd Tainted: G [14739.821394] Tainted: [C]=CRAP, [O]=OOT_MODULE [14739.825746] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) [14739.831577] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [14739.838538] pc : mt7925_sta_set_decap_offload+0xc0/0x1b8 [mt7925_common] [14739.845271] lr : mt7925_sta_set_decap_offload+0x58/0x1b8 [mt7925_common] [14739.851985] sp : ffffffc085efb500 [14739.855295] x29: ffffffc085efb500 x28: 0000000000000000 x27: ffffff807803a158 [14739.862436] x26: ffffff8041ececb8 x25: 0000000000000001 x24: 0000000000000001 [14739.869577] x23: 0000000000000001 x22: 0000000000000008 x21: ffffff8041ecea88 [14739.876715] x20: ffffff8041c19ca0 x19: ffffff8078031fe0 x18: 0000000000000000 [14739.883853] x17: 0000000000000000 x16: ffffffe2aeac1110 x15: 000000559da48080 [14739.890991] x14: 0000000000000001 x13: 0000000000000000 x12: 0000000000000000 [14739.898130] x11: 0a10020001008e88 x10: 0000000000001a50 x9 : ffffffe26457bfa0 [14739.905269] x8 : ffffff8042013bb0 x7 : ffffff807fb6cbf8 x6 : dead000000000100 [14739.912407] x5 : dead000000000122 x4 : ffffff80780326c8 x3 : 0000000000000000 [14739.919546] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff8041ececb8 [14739.926686] Call trace: [14739.929130] mt7925_sta_set_decap_offload+0xc0/0x1b8 [mt7925_common] [14739.935505] ieee80211_check_fast_rx+0x19c/0x510 [mac80211] [14739.941344] _sta_info_move_state+0xe4/0x510 [mac80211] [14739.946860] sta_info_move_state+0x1c/0x30 [mac80211] [14739.952116] sta_apply_auth_flags.constprop.0+0x90/0x1b0 [mac80211] [14739.958708] sta_apply_parameters+0x234/0x5e0 [mac80211] [14739.964332] ieee80211_add_station+0xdc/0x190 [mac80211] [14739.969950] nl80211_new_station+0x46c/0x670 [cfg80211] [14739.975516] genl_family_rcv_msg_doit+0xdc/0x150 [14739.980158] genl_rcv_msg+0x218/0x298 [14739.983830] netlink_rcv_skb+0x64/0x138 [14739.987670] genl_rcv+0x40/0x60 [14739.990816] netlink_unicast+0x314/0x380 [14739.994742] netlink_sendmsg+0x198/0x3f0 [14739.998664] __sock_sendmsg+0x64/0xc0 [14740.002324] ____sys_sendmsg+0x260/0x298 [14740.006242] ___sys_sendmsg+0xb4/0x110 Cc: stable@vger.kernel.org Link: https://github.com/morrownr/USB-WiFi/issues/603 [1] Fixes: b859ad65309a ("wifi: mt76: mt7925: add link handling in mt7925_sta_set_decap_offload") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Link: https://patch.msgid.link/35aedbffa050e98939264300407a52ba4e236d52.1748149855.git.deren.wu@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-07-07wifi: mt76: mt7925: fix incorrect scan probe IE handling for hw_scanMing Yen Hsieh
The IEs should be processed and filled into the command tlv separately according to each band. Cc: stable@vger.kernel.org Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250616063649.1100503-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-07-07wifi: mt76: mt7925: fix invalid array index in ssid assignment during hw scanMichael Lo
Update the destination index to use 'n_ssids', which is incremented only when a valid SSID is present. Previously, both mt76_connac_mcu_hw_scan() and mt7925_mcu_hw_scan() used the loop index 'i' for the destination array, potentially leaving gaps if any source SSIDs had zero length. Cc: stable@vger.kernel.org Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Michael Lo <michael.lo@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250612062046.160598-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-07-07wifi: mt76: mt7925: fix the wrong config for tx interruptMing Yen Hsieh
MT_INT_TX_DONE_MCU_WM may cause tx interrupt to be mishandled during a reset failure, leading to the reset process failing. By using MT_INT_TX_DONE_MCU instead of MT_INT_TX_DONE_MCU_WM, the handling of tx interrupt is improved. Cc: stable@vger.kernel.org Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250612060931.135635-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-07-07wifi: mt76: Remove RCU section in mt7996_mac_sta_rc_work()Lorenzo Bianconi
Since mt7996_mcu_add_rate_ctrl() and mt7996_mcu_set_fixed_field() can't run in atomic context, move RCU critical section in mt7996_mcu_add_rate_ctrl() and mt7996_mcu_set_fixed_field(). This patch fixes a 'sleep while atomic' issue in mt7996_mac_sta_rc_work(). Fixes: 0762bdd30279 ("wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-by: Ben Greear <greearb@candelatech.com> Link: https://patch.msgid.link/20250605-mt7996-sleep-while-atomic-v1-5-d46d15f9203c@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-07-07wifi: mt76: Move RCU section in mt7996_mcu_add_rate_ctrl()Lorenzo Bianconi
Since mt76_mcu_skb_send_msg() routine can't be executed in atomic context, move RCU section in mt7996_mcu_add_rate_ctrl() and execute mt76_mcu_skb_send_msg() in non-atomic context. This is a preliminary patch to fix a 'sleep while atomic' issue in mt7996_mac_sta_rc_work(). Fixes: 0762bdd30279 ("wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250605-mt7996-sleep-while-atomic-v1-4-d46d15f9203c@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-07-07wifi: mt76: Move RCU section in mt7996_mcu_add_rate_ctrl_fixed()Lorenzo Bianconi
Since mt7996_mcu_set_fixed_field() can't be executed in a RCU critical section, move RCU section in mt7996_mcu_add_rate_ctrl_fixed() and run mt7996_mcu_set_fixed_field() in non-atomic context. This is a preliminary patch to fix a 'sleep while atomic' issue in mt7996_mac_sta_rc_work(). Fixes: 0762bdd30279 ("wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250605-mt7996-sleep-while-atomic-v1-3-d46d15f9203c@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-07-07wifi: mt76: Move RCU section in mt7996_mcu_set_fixed_field()Lorenzo Bianconi
Since mt76_mcu_skb_send_msg() routine can't be executed in atomic context, move RCU section in mt7996_mcu_set_fixed_field() and execute mt76_mcu_skb_send_msg() in non-atomic context. This is a preliminary patch to fix a 'sleep while atomic' issue in mt7996_mac_sta_rc_work(). Fixes: 0762bdd30279 ("wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250605-mt7996-sleep-while-atomic-v1-2-d46d15f9203c@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-07-07wifi: mt76: Assume __mt76_connac_mcu_alloc_sta_req runs in atomic contextLorenzo Bianconi
Rely on GFP_ATOMIC flag in __mt76_connac_mcu_alloc_sta_req since it can run in atomic context. This is a preliminary patch to fix a 'sleep while atomic' issue in mt7996_mac_sta_rc_work(). Fixes: 0762bdd30279 ("wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250605-mt7996-sleep-while-atomic-v1-1-d46d15f9203c@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-07-07wifi: rt2x00: fix remove callback type mismatchFelix Fietkau
The function is used as remove callback for a platform driver. It was missed during the conversion from int to void Fixes: 0edb555a65d1 ("platform: Make platform_driver::remove() return void") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/20250706092053.97724-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-07wifi: mwifiex: discard erroneous disassoc frames on STA interfaceVitor Soares
When operating in concurrent STA/AP mode with host MLME enabled, the firmware incorrectly sends disassociation frames to the STA interface when clients disconnect from the AP interface. This causes kernel warnings as the STA interface processes disconnect events that don't apply to it: [ 1303.240540] WARNING: CPU: 0 PID: 513 at net/wireless/mlme.c:141 cfg80211_process_disassoc+0x78/0xec [cfg80211] [ 1303.250861] Modules linked in: 8021q garp stp mrp llc rfcomm bnep btnxpuart nls_iso8859_1 nls_cp437 onboard_us [ 1303.327651] CPU: 0 UID: 0 PID: 513 Comm: kworker/u9:2 Not tainted 6.16.0-rc1+ #3 PREEMPT [ 1303.335937] Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT) [ 1303.343588] Workqueue: MWIFIEX_RX_WORK_QUEUE mwifiex_rx_work_queue [mwifiex] [ 1303.350856] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1303.357904] pc : cfg80211_process_disassoc+0x78/0xec [cfg80211] [ 1303.364065] lr : cfg80211_process_disassoc+0x70/0xec [cfg80211] [ 1303.370221] sp : ffff800083053be0 [ 1303.373590] x29: ffff800083053be0 x28: 0000000000000000 x27: 0000000000000000 [ 1303.380855] x26: 0000000000000000 x25: 00000000ffffffff x24: ffff000002c5b8ae [ 1303.388120] x23: ffff000002c5b884 x22: 0000000000000001 x21: 0000000000000008 [ 1303.395382] x20: ffff000002c5b8ae x19: ffff0000064dd408 x18: 0000000000000006 [ 1303.402646] x17: 3a36333a61623a30 x16: 32206d6f72662063 x15: ffff800080bfe048 [ 1303.409910] x14: ffff000003625300 x13: 0000000000000001 x12: 0000000000000000 [ 1303.417173] x11: 0000000000000002 x10: ffff000003958600 x9 : ffff000003625300 [ 1303.424434] x8 : ffff00003fd9ef40 x7 : ffff0000039fc280 x6 : 0000000000000002 [ 1303.431695] x5 : ffff0000038976d4 x4 : 0000000000000000 x3 : 0000000000003186 [ 1303.438956] x2 : 000000004836ba20 x1 : 0000000000006986 x0 : 00000000d00479de [ 1303.446221] Call trace: [ 1303.448722] cfg80211_process_disassoc+0x78/0xec [cfg80211] (P) [ 1303.454894] cfg80211_rx_mlme_mgmt+0x64/0xf8 [cfg80211] [ 1303.460362] mwifiex_process_mgmt_packet+0x1ec/0x460 [mwifiex] [ 1303.466380] mwifiex_process_sta_rx_packet+0x1bc/0x2a0 [mwifiex] [ 1303.472573] mwifiex_handle_rx_packet+0xb4/0x13c [mwifiex] [ 1303.478243] mwifiex_rx_work_queue+0x158/0x198 [mwifiex] [ 1303.483734] process_one_work+0x14c/0x28c [ 1303.487845] worker_thread+0x2cc/0x3d4 [ 1303.491680] kthread+0x12c/0x208 [ 1303.495014] ret_from_fork+0x10/0x20 Add validation in the STA receive path to verify that disassoc/deauth frames originate from the connected AP. Frames that fail this check are discarded early, preventing them from reaching the MLME layer and triggering WARN_ON(). This filtering logic is similar with that used in the ieee80211_rx_mgmt_disassoc() function in mac80211, which drops disassoc frames that don't match the current BSSID (!ether_addr_equal(mgmt->bssid, sdata->vif.cfg.ap_addr)), ensuring only relevant frames are processed. Tested on: - 8997 with FW 16.68.1.p197 Fixes: 36995892c271 ("wifi: mwifiex: add host mlme for client mode") Cc: stable@vger.kernel.org Signed-off-by: Vitor Soares <vitor.soares@toradex.com> Reviewed-by: Jeff Chen <jeff.chen_1@nxp.con> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://patch.msgid.link/20250701142643.658990-1-ivitro@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-06wifi: rtw89: Enable the new rtw89_8852bu moduleBitterblue Smith
Enable compilation of the new rtw89_8852bu module. Tested mostly in station mode, and a little bit in AP mode. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/627e9e92-6f10-45de-a340-19b10d7bad82@gmail.com
2025-07-06wifi: rtw89: Add rtw8852bu.cBitterblue Smith
This is the entry point for the new rtw89_8852bu module. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/bac25b31-8146-4738-b8f2-eba66c51f3d8@gmail.com
2025-07-06wifi: rtw89: 8852b: Add rtw8852b_hfc_param_ini_usbBitterblue Smith
"hfc" means "hci fc" which is "Host Control Interface Flow Control". These are some parameters needed for RTL8852BU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/40dd1597-27d8-4316-ac3b-4bf7ff9f3e2f@gmail.com
2025-07-06wifi: rtw89: 8852b: Add rtw8852b_dle_mem_usb3Bitterblue Smith
"dle" could be "Data Link Engine" or "Double Link Engine". These are some parameters needed for RTL8852BU. In this case the same parameters are used for USB 2 and USB 3. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/7224021b-4fb5-44bc-aeb1-3a6fd3625f2a@gmail.com
2025-07-06wifi: rtw89: 8852b: Fix rtw8852b_pwr_{on,off}_func() for USBBitterblue Smith
There are a few differences in the power on/off functions between PCIE and USB. The changes in the power off function in particular are needed for the RTL8832BU to be able to power on again after it's powered off. While the RTL8832BU appears to work without the changes in the power on function, it's probably best to implement them, in case they are needed in some situations. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/c12da54f-88e6-4b11-8587-36f9cac13bf3@gmail.com
2025-07-06wifi: rtw89: 8852bx: Accept USB devices and load their MAC addressBitterblue Smith
Make __rtw8852bx_read_efuse() accept USB devices and load the MAC address from the correct offset. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/1f58d168-67a9-4d86-9e6a-73789c7a59f4@gmail.com
2025-07-04wifi: rtw89: enter power save mode aggressivelyChin-Yen Lee
Currently the driver allows the WiFi chip enter power save mode by checking the transmitting and receiving traffic is very low per two seconds. But it's hard for some applications to enter power save mode, like video streaming, which sends burst traffic regularly for other side to buffer and only send little traffic at most time. So adjust the criteria to enter power save while lower than 10Mbps and check it per 100ms. Thus WiFi chip could reduce power consumption under these applications. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250701073839.31905-1-pkshih@realtek.com
2025-07-04wifi: rtw89: Enable the new USB modulesBitterblue Smith
Enable compilation of the new rtw89_usb and rtw89_8851bu modules. Tested mostly in station mode, and a little bit in AP mode. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/4968a9d5-02c8-4d35-a5ad-b75ece8f5d36@gmail.com
2025-07-04wifi: rtw89: Add rtw8851bu.cBitterblue Smith
This is the entry point for the new rtw89_8851bu module. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/9d40c265-2982-4073-84a3-d3781defdbca@gmail.com
2025-07-04wifi: rtw89: Add usb.{c,h}Bitterblue Smith
Add basic USB support. No TX/RX aggregation, no switching to USB 3 mode. RTL8851BU and RTL8832BU work. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/f9ad1664-2d63-4a8f-88bf-c7b7bececbfe@gmail.com
2025-07-04wifi: rtw89: Add some definitions for USBBitterblue Smith
Add various register and bit definitions which will be used by the new USB driver. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/5812bb0c-20d0-48df-916d-25225eee8132@gmail.com
2025-07-04wifi: rtw89: Fix rtw89_mac_power_switch() for USBBitterblue Smith
Clear some bits in some registers in order to allow RTL8851BU to power on. This is done both when powering on and when powering off because that's what the vendor driver does. Also tested with RTL8832BU and RTL8832CU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/a39da939-d640-4486-ad38-f658f220afc8@gmail.com
2025-07-04wifi: rtw89: 8851b: Modify rtw8851b_pwr_{on,off}_func() for USBBitterblue Smith
There are a few differences in the power on/off functions between PCIE and USB. While the RTL8851BU appears to work without these changes, it's probably best to implement them, in case they are needed in some situations. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/469f6882-1859-464d-8a84-9ef1b6c8ce3e@gmail.com
2025-07-04wifi: rtw89: Hide some errors when the device is unpluggedBitterblue Smith
A few unnecessary error messages are printed when the device is unplugged. "read swsi busy" in particular can appear ~1000 times when RTL8851BU is unplugged. Add a new flag RTW89_FLAG_UNPLUGGED and print some error messages only when this flag is not set. The new USB driver will set the flag when the device is unplugged. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/cc18b739-6f38-4c1a-a681-1e2a0d4ed60d@gmail.com
2025-07-04wifi: rtw89: Add extra TX headroom for USBBitterblue Smith
In the case of USB the TX descriptor is transmitted in the same buffer as the 802.11 frame, so add the required headroom. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/91fb7579-60e5-4a06-8007-3312639beea6@gmail.com
2025-07-04wifi: rtw89: Disable deep power saving for USB/SDIOBitterblue Smith
Disable deep power saving for USB and SDIO because rtw89_mac_send_rpwm() is called in atomic context and accessing hardware registers results in "scheduling while atomic" errors. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/0f49eceb-0de0-47e2-ba36-3c6a0dddd17d@gmail.com
2025-07-04wifi: rtw89: Add rtw8851b_hfc_param_ini_usbBitterblue Smith
"hfc" means "hci fc" which is "Host Control Interface Flow Control". These are some parameters needed for RTL8851BU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/a0dec631-de05-4302-9ef1-e730eb233f08@gmail.com
2025-07-04wifi: rtw89: Add rtw8851b_dle_mem_usb{2,3}Bitterblue Smith
Add rtw8851b_dle_mem_usb2 and rtw8851b_dle_mem_usb3 and their various quotas and sizes in struct rtw89_mac_size_set. "dle" could be "Data Link Engine" or "Double Link Engine". These are some parameters needed for RTL8851BU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/91622304-614e-4e91-bf2f-7688cf44070b@gmail.com
2025-07-04wifi: rtw89: Make hfc_param_ini in rtw89_chip_info an arrayBitterblue Smith
USB and SDIO will need different sets of values, so make hfc_param_ini in struct rtw89_chip_info an array. Also make param_ini a pointer instead of copying the struct. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/1356f901-9ebf-451e-827f-50dd3efda534@gmail.com
2025-07-04wifi: rtw89: Make dle_mem in rtw89_chip_info an arrayBitterblue Smith
USB 2, USB 3, and SDIO will need different sets of values compared to PCIe. Add a new dle_type member in struct rtw89_hci_info and make dle_mem in struct rtw89_chip_info an array to hold the four different sets of values. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/c9152735-dbc4-4473-ae29-a79625cfbf78@gmail.com
2025-07-04wifi: rtw89: 8851b: Accept USB devices and load their MAC addressBitterblue Smith
Make rtw8851b_read_efuse() accept USB devices and load the MAC address from the correct offset. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/6b2a1382-3be4-4038-8005-cf96922e4332@gmail.com
2025-07-04wifi: rtw89: 8851b: rfk: update IQK to 0x14Ping-Ke Shih
Update IQK along with TX/RX clock to 960MHz and 1920MHz to improve performance. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250627035338.16637-1-pkshih@realtek.com
2025-07-04wifi: rtw89: 8851b: rfk: update DPK to 0x11Ping-Ke Shih
Update DPK with TX/RX clock to 960MHz and 1920MHz, which improve performance on certain chips. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250627035328.16577-1-pkshih@realtek.com
2025-07-04wifi: rtw89: 8851b: update NCTL 0xBPing-Ke Shih
To support new commands in DPK 0x11, update NCTL to version 0xB. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250627035201.16416-5-pkshih@realtek.com
2025-07-04wifi: rtw89: 8851b: adjust ADC setting for RF calibrationPing-Ke Shih
To get expected result of RF calibration at runtime, adjust ADC setting ahead for coming changes of RF calibration. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250627035201.16416-4-pkshih@realtek.com
2025-07-04wifi: rtw89: 8851b: set ADC bandwidth select according to calibration valuePing-Ke Shih
To handle hardware characteristic of ADC, calibrate the function and add a efuse field to record result, which driver uses it to set proper value accordingly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250627035201.16416-3-pkshih@realtek.com
2025-07-04wifi: rtw89: 8851b: rfk: extend DPK path_ok type to u8Ping-Ke Shih
Originally the type of path_ok is bool to denote that DPK is ready on certain path and can be enabled. For RTL8851B, hardware design can support more than one calibration set, so use type u8 instead to record the hardware set in current use. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250627035201.16416-2-pkshih@realtek.com
2025-07-04wifi: rtw88: coex: Use bitwise instead of arithmetic operator for flagsPei Xiao
This silences the following coccinelle warning: WARNING: sum of probable bitmasks, consider | Compile tested only. Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/c68a8642c325f626ac34ccee71d9d9aa69f0c92c.1750733428.git.xiaopei01@kylinos.cn
2025-07-03wifi: mt76: mt7925: fix off by one in mt7925_mcu_hw_scan()Dan Carpenter
The ssid->ssids[] and sreq->ssids[] arrays have MT7925_RNR_SCAN_MAX_BSSIDS elements so this >= needs to be > to prevent an out of bounds access. Fixes: 8284815ca161 ("wifi: mt76: mt7925: add RNR scan support for 6GHz") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/aDVT2tPhG_8T0Qla@stanley.mountain Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-07-03wifi: mt76: mt7915: mcu: re-init MCU before loading FW patchDavid Bauer
Restart the MCU and release the patch semaphore before loading the MCU patch firmware from the host. This fixes failures upon error recovery in case the semaphore was previously taken and never released by the host. This happens from time to time upon triggering a full-chip error recovery. Under this circumstance, the hardware restart fails and the radio is rendered inoperational. Signed-off-by: David Bauer <mail@david-bauer.net> Link: https://patch.msgid.link/20250402004528.1036715-3-mail@david-bauer.net Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-07-03wifi: mt76: mt7915: mcu: lower default timeoutDavid Bauer
The default timeout set in mt76_connac2_mcu_fill_message of 20 seconds leads to excessive stalling in case messages are lost. Testing showed that a smaller timeout of 5 seconds is sufficient in normal operation. Signed-off-by: David Bauer <mail@david-bauer.net> Link: https://patch.msgid.link/20250402004528.1036715-1-mail@david-bauer.net Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-07-03wifi: mt76: mt7915: mcu: increase eeprom command timeoutDavid Bauer
Increase the timeout for MCU_EXT_CMD_EFUSE_BUFFER_MODE command. Regular retries upon hardware-recovery have been observed. Increasing the timeout slightly remedies this problem. Signed-off-by: David Bauer <mail@david-bauer.net> Link: https://patch.msgid.link/20250402004528.1036715-2-mail@david-bauer.net Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-07-03wifi: iwlwifi: Fix error code in iwl_op_mode_dvm_start()Dan Carpenter
Preserve the error code if iwl_setup_deferred_work() fails. The current code returns ERR_PTR(0) (which is NULL) on this path. I believe the missing error code potentially leads to a use after free involving debugfs. Fixes: 90a0d9f33996 ("iwlwifi: Add missing check for alloc_ordered_workqueue") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/a7a1cd2c-ce01-461a-9afd-dbe535f8df01@sabinyo.mountain Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-07-02wifi: ath12k: add extended NSS bandwidth support for 160 MHzPradeep Kumar Chitrapu
Currently rx and tx MCS map for 160 MHz under HE capabilities are not updating properly, when 160 MHz is configured with NSS lesser than max NSS support. Fix this by utilizing nss_ratio_enabled and nss_ratio_info fields sent by firmware in service ready event. However, if firmware advertises EXT NSS BW support in VHT caps as 1(1x2) and when nss_ratio_info indicates 1:1, reset the EXT NSS BW Support in VHT caps to 0 which indicates 1x1. This is to avoid incorrectly choosing 1:2 NSS ratio when using the default VHT caps advertised by firmware. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20250701010408.1257201-10-quic_pradeepc@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-02wifi: ath12k: add support for 160 MHz bandwidthPradeep Kumar Chitrapu
Add support to configure maximum NSS in 160 MHz bandwidth. Firmware advertises support for handling NSS ratio information as a part of service ready ext event using nss_ratio_enabled flag. Save this information in ath12k_pdev_cap to calculate NSS ratio. Additionally, reorder the code by moving ath12k_peer_assoc_h_phymode() before ath12k_peer_assoc_h_vht() to ensure that arg->peer_phymode correctly reflects the bandwidth in the max NSS calculation. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20250701010408.1257201-9-quic_pradeepc@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-02wifi: ath12k: clean up 80P80 supportPradeep Kumar Chitrapu
Clean up unused 80P80 references as hardware does not support it. This is applicable to both QCN9274 and WCN7850. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20250701010408.1257201-8-quic_pradeepc@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-02wifi: ath12k: add support for setting fixed HE rate/GI/LTFPradeep Kumar Chitrapu
Add support to set fixed HE rate/GI/LTF values using nl80211. Reuse parts of the existing code path already used for HT/VHT to implement the new helpers symmetrically, similar to how HT/VHT is handled. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Co-developed-by: Muna Sinada <quic_msinada@quicinc.com> Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Link: https://patch.msgid.link/20250701010408.1257201-7-quic_pradeepc@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-02wifi: ath12k: generate rx and tx mcs maps for supported HE mcsPradeep Kumar Chitrapu
Generate rx and tx mcs maps in ath12k_mac_set_hemcsmap() based on number of supported tx/rx chains and set them in supported mcs/nss for HE capabilities. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Co-developed-by: Muna Sinada <quic_msinada@quicinc.com> Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20250701010408.1257201-5-quic_pradeepc@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
generated by cgit (git 2.34.1) at 2025-09-15 09:46:36 +0000