summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2019-12-19ath11k: Use sizeof_field() instead of FIELD_SIZEOF()Kees Cook
The FIELD_SIZEOF() macro was redundant, and is being removed from the kernel. Since commit c593642c8be0 ("treewide: Use sizeof_field() macro") this is one of the last users of the old macro, so replace it. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-19ath11k: explicitly cast wmi commands to their correct struct typeJohn Crispin
Three of the WMI command handlers were not casting to the right data type. Lets make the code consistent with the other handlers. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-19wil6210: add support for set_cqm_rssi_configDedy Lansky
set_cqm_rssi_config() is used by the kernel to configure connection quality monitor RSSI threshold. wil6210 uses WMI_SET_LINK_MONITOR_CMDID to set the RSSI threshold to FW which in turn reports RSSI threshold changes with WMI_LINK_MONITOR_EVENTID. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-19wil6210: support set_multicast_to_unicast cfg80211 operationAhmad Masri
Wil6210 AP has a separate ring for transmitting multicast packets, multicast packets are transmitted without an ack from the receiver side. Therefore, 802.11 spec defines some low MCS rates for multicat packets. However, there is no guarantee that these packets were really received and handled on the client side. Some applications that rely on multicast packets, may prefer to transmit these packets as a unicast to ensure reliability, and also to ensure better performance with high MCS rates. multicast to unicast is done by duplicating multicast packets to all clients and changing the DA (multicast) to the MAC address of the client. see NL80211_CMD_SET_MULTICAST_TO_UNICAST for more info. Signed-off-by: Ahmad Masri <amasri@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-19wil6210: fix MID valid bits in Rx status messageDedy Lansky
Fix incorrect definitions of MAC ID bits inside Rx status message. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-19wil6210: reduce ucode_debug memory regionDedy Lansky
ucode_debug memory region defined as 4K bytes. Fix this according to Talyn device memory map. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-19wil6210: add verification for cid upper boundAlexei Avshalom Lazar
max_assoc_sta can receive values (from the user or from the FW) that are higher than WIL6210_MAX_CID. Verify that cid doesn't exceed the upper bound of WIL6210_MAX_CID. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-19wil6210: take mem_lock for writing in crash dump collectionAlexei Avshalom Lazar
On some crash dump cases mem_lock is already taken, error returns and crash dump copy fails. In this case wait until mem_lock available instead of failing the operation. Also take the mem_lock for writing to prevent other threads from altering the state of the device while collecting crash dump. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-19wil6210: minimize the time that mem_lock is heldAlexei Avshalom Lazar
mem_lock is taken for the entire wil_reset(). Optimize this by taking mem_lock just before device is being reset and release the lock after FW download. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-19wil6210: dump Rx status message on errorsAhmad Masri
Dump all the Rx status message on different errors to allow more visibility of the case. Signed-off-by: Ahmad Masri <amasri@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-19net/ixgbe: Fix concurrency issues between config flow and XSKMaxim Mikityanskiy
Use synchronize_rcu to wait until the XSK wakeup function finishes before destroying the resources it uses: 1. ixgbe_down already calls synchronize_rcu after setting __IXGBE_DOWN. 2. After switching the XDP program, call synchronize_rcu to let ixgbe_xsk_wakeup exit before the XDP program is freed. 3. Changing the number of channels brings the interface down. 4. Disabling UMEM sets __IXGBE_TX_DISABLED before closing hardware resources and resetting xsk_umem. Check that bit in ixgbe_xsk_wakeup to avoid using the XDP ring when it's already destroyed. synchronize_rcu is called from ixgbe_txrx_ring_disable. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191217162023.16011-5-maximmi@mellanox.com
2019-12-19net/i40e: Fix concurrency issues between config flow and XSKMaxim Mikityanskiy
Use synchronize_rcu to wait until the XSK wakeup function finishes before destroying the resources it uses: 1. i40e_down already calls synchronize_rcu. On i40e_down either __I40E_VSI_DOWN or __I40E_CONFIG_BUSY is set. Check the latter in i40e_xsk_wakeup (the former is already checked there). 2. After switching the XDP program, call synchronize_rcu to let i40e_xsk_wakeup exit before the XDP program is freed. 3. Changing the number of channels brings the interface down (see i40e_prep_for_reset and i40e_pf_quiesce_all_vsi). 4. Disabling UMEM sets __I40E_CONFIG_BUSY, too. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191217162023.16011-4-maximmi@mellanox.com
2019-12-19net/mlx5e: Fix concurrency issues between config flow and XSKMaxim Mikityanskiy
After disabling resources necessary for XSK (the XDP program, channels, XSK queues), use synchronize_rcu to wait until the XSK wakeup function finishes, before freeing the resources. Suspend XSK wakeups during switching channels. If the XDP program is being removed, synchronize_rcu before closing the old channels to allow XSK wakeup to complete. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191217162023.16011-3-maximmi@mellanox.com
2019-12-18net: stmmac: tc: Fix TAPRIO division operationJose Abreu
For ARCHs that don't support 64 bits division we need to use the helpers. Fixes: b60189e0392f ("net: stmmac: Integrate EST with TAPRIO scheduler API") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18mlxsw: spectrum_qdisc: Support offloading of ETS QdiscPetr Machata
Handle TC_SETUP_QDISC_ETS, add a new ops structure for the ETS Qdisc. Invoke the extended prio handlers implemented in the previous patch. For stats ops, invoke directly the prio callbacks, which are not sensitive to differences between PRIO and ETS. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18mlxsw: spectrum_qdisc: Generalize PRIO offload to support ETSPetr Machata
Thanks to the similarity between PRIO and ETS it is possible to simply reuse most of the code for offloading PRIO Qdisc. Extract the common functionality into separate functions, making the current PRIO handlers thin API adapters. Extend the new functions to pass quanta for individual bands, which allows configuring a subset of bands as WRR. Invoke mlxsw_sp_port_ets_set() as appropriate to de/configure WRR-ness and weight of individual bands. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18mlxsw: spectrum: Rename MLXSW_REG_QEEC_HIERARCY_* enumeratorsPetr Machata
These enums want to be named MLXSW_REG_QEEC_HIERARCHY_, but due to a typo lack the second H. That is confusing and complicates searching. But actually the enumerators should be named _HR_, because that is how their enum type is called. So rename them as appropriate. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18mlxsw: spectrum_qdisc: Clarify a commentPetr Machata
Expand the comment at mlxsw_sp_qdisc_prio_graft() to make the problem that this function is trying to handle clearer. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: mmc: Add Frame Preemption counters on GMAC5+ coresJose Abreu
This can be useful for debug. Add these counters on GMAC5+ cores just like we did for XGMAC. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: xgmac3+: Add support for Frame PreemptionJose Abreu
Adds the HW specific support for Frame Preemption on XGMAC3+ cores. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: gmac5+: Add support for Frame PreemptionJose Abreu
Adds the HW specific support for Frame Preemption on GMAC5+ cores. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Add Frame Preemption support using TAPRIO APIJose Abreu
Adds the support for Frame Preemption using TAPRIO API. This works along with EST feature and allows to select if preemptable traffic shall be sent during specific queues opening time. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Integrate EST with TAPRIO scheduler APIJose Abreu
Now that we have the EST code for XGMAC and QoS we can use it with the TAPRIO scheduler. Integrate it into the main driver and use the API to configure the EST feature. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Add basic EST support for XGMACJose Abreu
Adds the support for EST in XGMAC cores. This feature allows to offload scheduling of queues opening time to the IP. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Add basic EST support for GMAC5+Jose Abreu
Adds the support for EST in GMAC5+ cores. This feature allows to offload scheduling of queues opening time to the IP. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Always use TX coalesce timer value when reschedulingJose Abreu
When we have pending packets we re-arm the TX timer with a magic value. This changes the re-arm of the timer from 10us to the user-defined coalesce value. As we support different speeds, having a magic value of 10us can be either too short or to large depending on the speed so we let user configure it. The default value of the timer is 1ms but it can be reconfigured by ethtool. Changes from v1: - Reword commit message (Jakub) Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Let TX and RX interrupts be independently enabled/disabledJose Abreu
By using this mechanism we can get rid of the not so nice method of scheduling TX NAPI when the RX was scheduled. No bandwidth reduction was seen with this change. Changes from v1: - Remove useless comment (Jakub) - Do not bind the TX clean to NAPI budget (Jakub) Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Print more information in DebugFS DMA Capabilities fileJose Abreu
DMA Capabilites have grown but the DebugFS that shows this info has not been updated. Lets add the missing information. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Always arm TX Timer at end of transmission startJose Abreu
If TX Coalesce timer is enabled we should always arm it, otherwise we may hit the case where an interrupt is missed and the TX Queue will timeout. Arming the timer does not necessarly mean it will run the tx_clean() because this function is wrapped around NAPI launcher. Fixes: 9125cdd1be11 ("stmmac: add the initial tx coalesce schema") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Enable 16KB buffer sizeJose Abreu
XGMAC supports maximum MTU that can go to 16KB. Lets add this check in the calculation of RX buffer size. Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: 16KB buffer must be 16 byte alignedJose Abreu
The 16KB RX Buffer must also be 16 byte aligned. Fix it. Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: RX buffer size must be 16 byte alignedJose Abreu
We need to align the RX buffer size to at least 16 byte so that IP doesn't mis-behave. This is required by HW. Changes from v2: - Align UP and not DOWN (David) Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: xgmac: Clear previous RX buffer sizeJose Abreu
When switching between buffer sizes we need to clear the previous value. Fixes: d6ddfacd95c7 ("net: stmmac: Add DMA related callbacks for XGMAC2") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Only the last buffer has the FCS fieldJose Abreu
Only the last received buffer contains the FCS field. Check for end of packet before trying to strip the FCS field. Fixes: 88ebe2cf7f3f ("net: stmmac: Rework stmmac_rx()") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Do not accept invalid MTU valuesJose Abreu
The maximum MTU value is determined by the maximum size of TX FIFO so that a full packet can fit in the FIFO. Add a check for this in the MTU change callback. Also check if provided and rounded MTU does not passes the maximum limit of 16K. Changes from v2: - Align MTU before checking if its valid Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Determine earlier the size of RX bufferJose Abreu
Split Header feature needs to know the size of RX buffer but current code is determining it too late. Fix this by moving the RX buffer computation to earlier stage. Changes from v2: - Do not try to align already aligned buffer size Fixes: 67afd6d1cfdf ("net: stmmac: Add Split Header support and enable it in XGMAC cores") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: selftests: Needs to check the number of Multicast regsJose Abreu
When running the MC and UC filter tests we setup a multicast address that its expected to be blocked. If the number of available multicast registers is zero, driver will always pass the multicast packets which will fail the test. Check if available multicast addresses is enough before running the tests. Fixes: 091810dbded9 ("net: stmmac: Introduce selftests support") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18orinoco: avoid assertion in case of NULL pointerAditya Pakki
In ezusb_init, if upriv is NULL, the code crashes. However, the caller in ezusb_probe can handle the error and print the failure message. The patch replaces the BUG_ON call to error return. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18brcmfmac: Keep OOB wake-interrupt disabled when it shouldn't be enabledDmitry Osipenko
NVIDIA Tegra SoCs do not like when OOB wake is enabled and WiFi interface is in DOWN state during suspend. This results in a CPU hang on programming OOB wake-up state of the GPIO controller during of system's suspend. The solution is trivial: don't enable wake for the OOB interrupt when it should be disabled. This fixes hang on Tegra20 (Acer A500) and Tegra30 (Nexus 7) devices which are using BCM4329 and BCM4330 WiFi chips respectively. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18brcmfmac: Fix memory leak in brcmf_usbdev_qinitNavid Emamdoost
In the implementation of brcmf_usbdev_qinit() the allocated memory for reqs is leaking if usb_alloc_urb() fails. Release reqs in the error handling path. Fixes: 71bb244ba2fd ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18brcmfmac: not set mbss in vif if firmware does not support MBSSWright Feng
With RSDB mode, FMAC and firmware are able to create 2 or more AP, so we should not set mbss in vif structure if firmware does not support MBSS feature. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Soeren Moch <smoch@web.de> Reviewed-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18brcmfmac: add RSDB condition when setting interface combinationsWright Feng
With firmware RSDB feature 1. The maximum support interface is four. 2. The maximum difference channel is two. 3. The maximum interfaces of {station/p2p client/AP} are two. 4. The maximum interface of p2p device is one. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Soeren Moch <smoch@web.de> Reviewed-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18brcmfmac: add support for BCM4359 SDIO chipsetSoeren Moch
BCM4359 is a 2x2 802.11 abgn+ac Dual-Band HT80 combo chip and it supports Real Simultaneous Dual Band feature. Based on a similar patch by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Soeren Moch <smoch@web.de> Acked-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18brcmfmac: make errors when setting roaming parameters non-fatalSoeren Moch
4359 dongles do not support setting roaming parameters (error -52). Do not fail the 80211 configuration in this case. Signed-off-by: Soeren Moch <smoch@web.de> Acked-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18brcmfmac: fix rambase for 4359/9Soeren Moch
Newer 4359 chip revisions need a different rambase address. This fixes firmware download on such devices which fails otherwise. Signed-off-by: Soeren Moch <smoch@web.de> Acked-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18brcmfmac: set F2 blocksize and watermark for 4359Chung-Hsien Hsu
Set F2 blocksize to 256 bytes and watermark to 0x40 for 4359. Also enable and configure F1 MesBusyCtrl. It fixes DMA error while having UDP bi-directional traffic. Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com> [slightly adapted for rebase on mainline linux] Signed-off-by: Soeren Moch <smoch@web.de> Reviewed-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18brcmfmac: reset two D11 cores if chip has two D11 coresWright Feng
There are two D11 cores in RSDB chips like 4359. We have to reset two D11 cores simutaneously before firmware download, or the firmware may not be initialized correctly and cause "fw initialized failed" error. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Soeren Moch <smoch@web.de> Reviewed-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl8192de: use generic rtl_signal_scale_mappingMichael Straube
Function _rtl92de_signal_scale_mapping is identical to the generic version rtl_signal_scale_mapping. Remove _rtl92de_signal_scale_mapping and use the generic function. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl8192cu: use generic rtl_signal_scale_mappingMichael Straube
Function _rtl92c_signal_scale_mapping is identical to the generic version rtl_signal_scale_mapping. Remove _rtl92c_signal_scale_mapping and use the generic function. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl8192ce: use generic rtl_signal_scale_mappingMichael Straube
Function _rtl92ce_signal_scale_mapping is identical to the generic version rtl_signal_scale_mapping. Remove _rtl92ce_signal_scale_mapping and use the generic function. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-14 20:01:49 +0000