summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2019-11-29ath11k: Advertise MPDU start spacing as no restrictionVenkateswara Naralasetty
Adverise MPDU start spacing as no restriction in ht capabilities, Since IPQ8074 hw support all sorts of mpdu start spcing. With this observed minor uplink performance improvement in lower data frame size case with Veriwave clients. Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath11k: Update tx and rx chain count properly on drv_set_antennaSriram R
Set the number of tx and rx chains properly on drv_set_antenna(). This will ensure the related ht/vht/he caps are properly recalculated based on the tx/rx chains set. Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath11k: add necessary peer assoc params in wmi dbgSriram R
Add necessary peer assoc params in WMI debug message while sending the peer assoc command to firmware to aid in debugging. Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath11k: unlock mutex during failure in qmi fw readyGovindaraj Saminathan
qmi firmware ready event start to initialize the core modules and the sequence executed with mutex lock. In case of any failure mutex should be unlocked otherwise it will hang during the recovery. Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath11k: add support for controlling tx power to a stationMaharaja Kennadyrajan
This patch will add the support to control the transmit power for traffic to a station associated with the AP. Underlying firmware will enforce that the maximum tx power will be based on the regulatory requirements. If the user given transmit power is greater than the allowed tx power in the given channel, then the firmware will use the maximum tx power in the same channel. Max and Min tx power values will depends on number of tx chain masks. The allowed tx power range values are from 6 to 23. When 0 is sent to the firmware as tx power, it will revert to the default tx power for the station. Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath11k: update bawindow size in delba processVenkateswara Naralasetty
Currenly in delba process calling ath11k_peer_rx_tid_delete() updates reo with desc invalid and add tid queue to the flush list. If station send data traffic without addba req and before tid flush, hw gives those packets as invalid desc reo error. Since we are dropping these invalid desc packets results in traffic stall. This patch fix this issue by updating the reo queue with bawindow size 1 instead of tid removal in delba process. Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath11k: avoid use_after_free in ath11k_dp_rx_msdu_coalesce APIKarthikeyan Periyasamy
Accessing already stored first msdu data after the skb expand trigger use_after_free, since first msdu got deleted. so do the descriptor copy operation before the skb expand operation. Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath11k: avoid burst time conversion logicKarthikeyan Periyasamy
WMI_VDEV_SET_WMM_PARAMS commmand expects the txoplimit param in the units of 32 microseconds. convert the txop unit from 32 microseconds to absolute microseconds leads to the higher burst values which is incorrect. so no need to convert the txop unit from 32 microseconds to absolute microseconds. Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath11k: pktlog: fix sending/using the pdev idAnilkumar Kolli
Fixes sending the pdev id(0,1,2 for mac0, mac1, mac2) to FW in wmi cmd pktlog enable/disable. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath11k: qmi clean up in ath11k_qmi_wlanfw_wlan_cfg_send()Anilkumar Kolli
Use pipe_id id instead of ret in for loop. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath11k: qmi clean up ce and HTC service config updateAnilkumar Kolli
Copy CE and htc service configs for all pipes. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath11k: tracing: fix ath11k tracingAnilkumar Kolli
Add missing tracing subsystem define. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath10k: enable wow feature for sdio chipWen Gong
sdio does not support wow, this patch is to enable it. When system enter sleep state, if wowlan is enabled, then sdio chip will keep power if platform support keep power, after resume, it will not need to re-load firmware again. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath10k: change log level for mpdu status of sdio chipWen Gong
Change log level from warn to dbg level of mpdu status of sdio chip. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00007-QCARMSWP-1. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath10k: set WMI_PEER_AUTHORIZE after a firmware crashWen Gong
After the firmware crashes ath10k recovers via ieee80211_reconfig(), which eventually leads to firmware configuration and including the encryption keys. However, because there is no new auth/assoc and 4-way-handshake, and firmware set the authorize flag after 4-way-handshake, so the authorize flag in firmware is not set in firmware without 4-way-handshake. This will lead to a failure of data transmission after recovery done when using encrypted connections like WPA-PSK. Set authorize flag after installing keys to firmware will fix the issue. This was noticed by testing firmware crashing using simulate_fw_crash debugfs file. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00007-QCARMSWP-1. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath10k: set max mtu to 1500 for sdio chipWen Gong
For sdio chip, the max credit size in firmware is 1556, the 1556 include payload, ieee80211 header, htt header, htc header. So it need to set the max mtu to 1500 to forbidden TX packet which exceed 1500 form application. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00017-QCARMSWP-1. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath10k: enable firmware log by default for sdioWen Gong
On SDIO chips the firmware log does not impact performance. To make it easier to debug firmware problems keep it enabled on the firmware. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath11k: Fix target crash due to WBM_IDLE_LINK ring desc shortageVasanthakumar Thiagarajan
Make sure the number of WBM_IDLE_LINK ring descriptors is power of 2. This increases the number of descriptors to 32k from the current ~18k to fix the target assert because of the shortage in the descriptors in WBM_IDLE_LINK ring. Remove unnecessary power of 2 calculation in ath11k_dp_link_desc_setup() as it is not required after this change. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath11k: Fixing TLV length issue in peer pktlog WMI commandVikas Patel
TLV length was 0 for TLV tag 'WMI_TAG_ARRAY_STRUCT' causing Q6 to crash when trying to configure pktlog filter via debugfs. Signed-off-by: Vikas Patel <vikpatel@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath11k: Fix skb_panic observed during msdu coalescingSriram R
skb_panic is hit during msdu coalescing whenever enough tailroom is not allocated based on the remaining msdu length which is spread across in different rx buffers. Compute the extra length for resizing the skb based on the total msdu length and the msdu length of the first buffer. Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath11k: remove unused tx ring countersPradeep Kumar Chitrapu
remove unused counter to avoid taking locks inorder to optimize cpu load. Using Flamegraph, cpu usage of ath11k_dp_tx() observed to be decreased from 5.58% to 3.74% with iperf traffic running with 80MHz bandwidth ap mode. Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath11k: avoid WMM param truncationKarthikeyan Periyasamy
In conf_tx() mac operation callback, we are truncating the tx params cw_min and cw_max due to lower data type cast. so modified the data type of cwmin and cwmax to avoid the trucation issue. Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath11k: optimize RX path latencyJohn Crispin
This patch drops ath11k_hal_rx_parse_dst_ring_desc(). This function was creating a huge amount of load, which lead to a signifcant latency delay when processing data in the RX path. Pegging the processing on a specific core and running perf --top we get the following output when running HE80 at a fixed bandwidth of 1gbit. with patch 19.19% [ath11k] [k] ath11k_dp_process_rx 5.02% [ath11k] [k] ath11k_dp_rx_tid_del_func 4.39% [kernel] [k] v7_dma_inv_range 4.15% [kernel] [k] __slab_alloc.constprop.1 4.03% [kernel] [k] dev_gro_receive 3.86% [kernel] [k] tcp_gro_receive 3.07% [ip_tables] [k] ipt_do_table 2.96% [kernel] [k] dma_cache_maint_page without patch 21.64% [ath11k] [k] ath11k_hal_rx_parse_dst_ring_desc 10.80% [ath11k] [k] ath11k_dp_process_rx 3.77% [kernel] [k] v7_dma_inv_range 3.48% [kernel] [k] dev_gro_receive 3.32% [ath11k] [k] ath11k_dp_rx_tid_del_func 3.17% [mac80211] [k] ieee80211_rx_napi 2.70% [kernel] [k] dma_cache_maint_page 2.65% [mac80211] [k] ieee80211_sta_ps_transition When removing the the bandwidth limit and rerunning the test we see an overall throughput improvement of 3-400mbit when running 4x4 HE80. Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath11k: update tcl cmd descriptor parameters for STA modeAnilkumar Kolli
It is observed that ath11k STA mode UL throughput is low. This is due to packets delivered to FW from TCL instead of TQM. TCL AST search fail causes packet delivered to FW, fix this by properly configuring the TCL address search type and ast_hash. STA UL throughput is improved 10times with 11AC AP. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath11k: fix wmi service ready ext tlv parsingAnilkumar Kolli
The current ath11k driver failed to parse wmi_tlv_svc_rdy_ext_parse if there is change in wmi_mac_phy_capabilities length with below error. ath11k c000000.wifi1: failed to extract mac caps, idx :0 ath11k c000000.wifi1: failed to parse tlv -22 This is needed to get firmware version WLAN.HK.2.0.0.1-00240-QCAHKSWPL_SILICONZ-1 working. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath11k: fix resource leak in ath11k_mac_sta_stateKarthikeyan Periyasamy
Handled the error case with proper resource cleanup and moved the handling into a separate function from ath11k_mac_sta_state. Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath11k: Fix htt stats sounding info and pdev cca statsGanesh Sesetti
The Previous configuartion of htt stats sounding info and pdev cca stats are invalid due to that getting time out error. Changing htt stats sounding info value from 0xFF to 0x00 and htt pdev cca stats from 0x10 to 0x00 Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-28net: macb: add missed tasklet_killChuhong Yuan
This driver forgets to kill tasklet in remove. Add the call to fix it. Fixes: 032dc41ba6e2 ("net: macb: Handle HRESP error") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-28Merge branch 'pci/resource'Bjorn Helgaas
- Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) * pci/resource: PCI: Do not use bus number zero from EA capability PCI: Avoid double hpmemsize MMIO window assignment PCI: Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters PCI: Add PCI_STD_NUM_BARS for the number of standard BARs PCI: Fix missing bridge dma_ranges resource list cleanup PCI: Protect pci_reassign_bridge_resources() against concurrent addition/removal
2019-11-28ath9k: use iowrite32 over __raw_writelChristian Lamparter
This patch changes the ath9k_pci_owl_loader to use the same iowrite32 memory accessor that ath9k_pci is using to communicate with the PCI(e) chip. This will fix endian issues that came up during testing with loaned AVM Fritz!Box 7360 (Lantiq MIPS SoCs + AR9287). Fixes: 5a4f2040fd07 ("ath9k: add loader for AR92XX (and older) pci(e)") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-28mwifiex: fix possible heap overflow in mwifiex_process_country_ie()Ganapathi Bhat
mwifiex_process_country_ie() function parse elements of bss descriptor in beacon packet. When processing WLAN_EID_COUNTRY element, there is no upper limit check for country_ie_len before calling memcpy. The destination buffer domain_info->triplet is an array of length MWIFIEX_MAX_TRIPLET_802_11D(83). The remote attacker can build a fake AP with the same ssid as real AP, and send malicous beacon packet with long WLAN_EID_COUNTRY elemen (country_ie_len > 83). Attacker can force STA connect to fake AP on a different channel. When the victim STA connects to fake AP, will trigger the heap buffer overflow. Fix this by checking for length and if found invalid, don not connect to the AP. This fix addresses CVE-2019-14895. Reported-by: huangwen <huangwenabc@gmail.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: "This is mostly to fix the iwlwifi regression: 1) Flush GRO state properly in iwlwifi driver, from Alexander Lobakin. 2) Validate TIPC link name with properly length macro, from John Rutherford. 3) Fix completion init and device query timeouts in ibmvnic, from Thomas Falcon. 4) Fix SKB size calculation for netlink messages in psample, from Nikolay Aleksandrov. 5) Similar kind of fix for OVS flow dumps, from Paolo Abeni. 6) Handle queue allocation failure unwind properly in gve driver, we could try to release pages we didn't allocate. From Jeroen de Borst. 7) Serialize TX queue SKB list accesses properly in mscc ocelot driver. From Yangbo Lu" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: net: usb: aqc111: Use the correct style for SPDX License Identifier net: phy: Use the correct style for SPDX License Identifier net: wireless: intel: iwlwifi: fix GRO_NORMAL packet stalling net: mscc: ocelot: use skb queue instead of skbs list net: mscc: ocelot: avoid incorrect consuming in skbs list gve: Fix the queue page list allocated pages count net: inet_is_local_reserved_port() port arg should be unsigned short openvswitch: fix flow command message size net: phy: dp83869: Fix return paths to return proper values net: psample: fix skb_over_panic net: usbnet: Fix -Wcast-function-type net: hso: Fix -Wcast-function-type net: port < inet_prot_sock(net) --> inet_port_requires_bind_service(net, port) ibmvnic: Serialize device queries ibmvnic: Bound waits for device queries ibmvnic: Terminate waiting device threads after loss of service ibmvnic: Fix completion structure initialization net-sctp: replace some sock_net(sk) with just 'net' net: Fix a documentation bug wrt. ip_unprivileged_port_start tipc: fix link name length check
2019-11-27net: usb: aqc111: Use the correct style for SPDX License IdentifierNishad Kamdar
This patch corrects the SPDX License Identifier style in header files related to drivers for USB Network devices. This patch gives an explicit block comment to the SPDX License Identifier. Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-27net: phy: Use the correct style for SPDX License IdentifierNishad Kamdar
This patch corrects the SPDX License Identifier style in header files related to PHY Layer for Ethernet drivers. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). This patch also gives an explicit block comment to the SPDX License Identifier. Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-27net: wireless: intel: iwlwifi: fix GRO_NORMAL packet stallingAlexander Lobakin
Commit 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()") has applied batched GRO_NORMAL packets processing to all napi_gro_receive() users, including mac80211-based drivers. However, this change has led to a regression in iwlwifi driver [1][2] as it is required for NAPI users to call napi_complete_done() or napi_complete() and the end of every polling iteration, whilst iwlwifi doesn't use NAPI scheduling at all and just calls napi_gro_flush(). In that particular case, packets which have not been already flushed from napi->rx_list stall in it until at least next Rx cycle. Fix this by adding a manual flushing of the list to iwlwifi driver right before napi_gro_flush() call to mimic napi_complete() logics. I prefer to open-code gro_normal_list() rather than exporting it for 2 reasons: * to prevent from using it and napi_gro_flush() in any new drivers, as it is the *really* bad way to use NAPI that should be avoided; * to keep gro_normal_list() static and don't lose any CC optimizations. I also don't add the "Fixes:" tag as the mentioned commit was only a trigger that only exposed an improper usage of NAPI in this particular driver. [1] https://lore.kernel.org/netdev/PSXP216MB04388962C411CD0B17A86F47804A0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM [2] https://bugzilla.kernel.org/show_bug.cgi?id=205647 Signed-off-by: Alexander Lobakin <alobakin@dlink.ru> Acked-by: Luca Coelho <luciano.coelho@intel.com> Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Tested-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Reviewed-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-27Merge tag 'driver-core-5.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "big" set of driver core patches for 5.5-rc1 There's a few minor cleanups and fixes in here, but the majority of the patches in here fall into two buckets: - debugfs api cleanups and fixes - driver core device link support for boot dependancy issues The debugfs api cleanups are working to slowly refactor the debugfs apis so that it is even harder to use incorrectly. That work has been happening for the past few kernel releases and will continue over time, it's a long-term project/goal The driver core device link support missed 5.4 by just a bit, so it's been sitting and baking for many months now. It's from Saravana Kannan to help resolve the problems that DT-based systems have at boot time with dependancy graphs and kernel modules. Turns out that no one has actually tried to build a generic arm64 kernel with loads of modules and have it "just work" for a variety of platforms (like a distro kernel). The big problem turned out to be a lack of dependency information between different areas of DT entries, and the work here resolves that problem and now allows devices to boot properly, and quicker than a monolith kernel. All of these patches have been in linux-next for a long time with no reported issues" * tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (68 commits) tracing: Remove unnecessary DEBUG_FS dependency of: property: Add device link support for interrupt-parent, dmas and -gpio(s) debugfs: Fix !DEBUG_FS debugfs_create_automount of: property: Add device link support for "iommu-map" of: property: Fix the semantics of of_is_ancestor_of() i2c: of: Populate fwnode in of_i2c_get_board_info() drivers: base: Fix Kconfig indentation firmware_loader: Fix labels with comma for builtin firmware driver core: Allow device link operations inside sync_state() driver core: platform: Declare ret variable only once cpu-topology: declare parse_acpi_topology in <linux/arch_topology.h> crypto: hisilicon: no need to check return value of debugfs_create functions driver core: platform: use the correct callback type for bus_find_device firmware_class: make firmware caching configurable driver core: Clarify documentation for fwnode_operations.add_links() mailbox: tegra: Fix superfluous IRQ error message net: caif: Fix debugfs on 64-bit platforms mac80211: Use debugfs_create_xul() helper media: c8sectpfe: no need to check return value of debugfs_create functions of: property: Add device link support for iommus, mboxes and io-channels ...
2019-11-27net: mscc: ocelot: use skb queue instead of skbs listYangbo Lu
Convert to use skb queue instead of the list of skbs. The skb queue could provide protection with lock. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-27net: mscc: ocelot: avoid incorrect consuming in skbs listYangbo Lu
Break the matching loop when find the matching skb for TX timestamp. This is to avoid consuming more skbs incorrectly. The timestamp ID is from 0 to 3 while the FIFO could support 128 timestamps at most. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-27Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "Again another fairly quiet cycle with few notable core code changes and the usual variety of driver bug fixes and small improvements. - Various driver updates and bug fixes for siw, bnxt_re, hns, qedr, iw_cxgb4, vmw_pvrdma, mlx5 - Improvements in SRPT from working with iWarp - SRIOV VF support for bnxt_re - Skeleton kernel-doc files for drivers/infiniband - User visible counters for events related to ODP - Common code for tracking of mmap lifetimes so that drivers can link HW object liftime to a VMA - ODP bug fixes and rework - RDMA READ support for efa - Removal of the very old cxgb3 driver" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (168 commits) RDMA/hns: Delete unnecessary callback functions for cq RDMA/hns: Rename the functions used inside creating cq RDMA/hns: Redefine the member of hns_roce_cq struct RDMA/hns: Redefine interfaces used in creating cq RDMA/efa: Expose RDMA read related attributes RDMA/efa: Support remote read access in MR registration RDMA/efa: Store network attributes in device attributes IB/hfi1: remove redundant assignment to variable ret RDMA/bnxt_re: Fix missing le16_to_cpu RDMA/bnxt_re: Fix stat push into dma buffer on gen p5 devices RDMA/bnxt_re: Fix chip number validation Broadcom's Gen P5 series RDMA/bnxt_re: Fix Kconfig indentation IB/mlx5: Implement callbacks for getting VFs GUID attributes IB/ipoib: Add ndo operation for getting VFs GUID attributes IB/core: Add interfaces to get VF node and port GUIDs net/core: Add support for getting VF GUIDs RDMA/qedr: Fix null-pointer dereference when calling rdma_user_mmap_get_offset RDMA/cm: Use refcount_t type for refcount variable IB/mlx5: Support extended number of strides for Striding RQ IB/mlx4: Update HW GID table while adding vlan GID ...
2019-11-27Merge tag 'mmc-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "These are the updates for MMC and MEMSTICK for v5.5. Note that this also contains quite some additional changes reaching beyond both the MMC and MEMSTICK subsystems. This is primarily because of fixing an old regression for a WiFi driver based on the SDIO interface on an OMAP openpandora board MMC core: - Add CMD13 polling for MMC IOCTLS with R1B response. - Add common DT properties for clk-phase-delays for various speed modes. - Fix size overflow for mmc gp-partitions. - Re-work HW reset for SDIO cards, which also includes a re-work for Marvell's WiFi mwifiex SDIO func driver. MMC host: - jz4740: Add support for X1000 and JZ4760. - jz4740: Add support for 8-bit bus and for low power mode. - mmci: Add support for HW busy timeout for the stm32_sdmmc variant. - owl-mmc: Add driver for Actions Semi Owl SoCs SD/MMC controller. - renesas_sdhi: Add support for r8a774b1. - sdhci_am654: Add support for Command Queuing Engine for J721E. - sdhci-milbeaut: Add driver for the Milbeaut SD controller. - sdhci-of-arasan: Add support for ZynqMP tap-delays. - sdhci-of-arasan: Add support for clk-phase-delays for SD cards. - sdhci-of-arasan: Add support for Intel LGM SDXC. - sdhci-of-aspeed: Allow inversion of the internal card detect signal. - sdhci-of-esdhc: Fixup workaround for erratum A-008171 for tunings. - sdhci-of-at91: Improve support for calibration. - sdhci-pci: Add support for Intel JSL. - sdhci-pci: Add quirk for AMD SDHC Device 0x7906. - tmio: Enable support for erase/discard/trim requests. MMC/OMAP/pandora/wl1251: The TI wl1251 WiFi driver for SDIO on the OMAP openpandora board has been broken since v4.7. To fix the problems, changes have been made cross subsystems, but also to OMAP2 machine code and to openpandora DTS files, as summarized below. Relevant changes have been tagged for stable. - mmc/wl1251: Re-introduce lost SDIO quirks and vendor-id for wl1251 - omap/omap_hsmmc: Remove redundant platform config for openpandora - omap_hsmmc: Initialize non-std SDIO card for wl1251 for pandora - omap/dts/pandora: Specify wl1251 through a child node of mmc3 - wl1251: Add devicetree support for TI wl1251 SDIO" * tag 'mmc-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (73 commits) dt-bindings: mmc: Correct the type of the clk phase properties Revert "mmc: tmio: remove workaround for NON_REMOVABLE" memstick: Fix Kconfig indentation mmc: sdhci-of-arasan: Add support for ZynqMP Platform Tap Delays Setup dt-bindings: mmc: arasan: Document 'xlnx,zynqmp-8.9a' controller firmware: xilinx: Add SDIO Tap Delay nodes mmc: sdhci-of-arasan: Add support to set clock phase delays for SD dt-bindings: mmc: Add optional generic properties for mmc mmc: sdhci-of-arasan: Add sampling clock for a phy to use dt-bindings: mmc: arasan: Update Documentation for the input clock mmc: sdhci-of-arasan: Separate out clk related data to another structure mmc: sdhci: Fix grammar in warning message mmc: sdhci-of-aspeed: add inversion signal presence mmc: sdhci-of-aspeed: enable CONFIG_MMC_SDHCI_IO_ACCESSORS mmc: sdhci_am654: Add Support for Command Queuing Engine to J721E mmc: core: Fix size overflow for mmc partitions mmc: tmio: Add MMC_CAP_ERASE to allow erase/discard/trim requests net: wireless: ti: remove local VENDOR_ID and DEVICE_ID definitions net: wireless: ti: wl1251 use new SDIO_VENDOR_ID_TI_WL1251 definition mmc: core: fix wl1251 sdio quirks ...
2019-11-27ath10k: move non-fatal warn logs to dbg levelGovind Singh
During driver load below warn logs are printed in the console if firmware doesn't support some optional HTC services, ex:pktlog. It is likely some older fw version may not support PKTLOG HTC service as legacy fw uses HTC DATA service for pktlog. Move this log to debug level to remove un-necessary warn message on console. htc.c:803: ath10k_warn(ar, "unsupported HTC service id: %d\n", htc.c:881: ath10k_warn(ar, "unsupported HTC service id: %d\n", Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-27ath11k: add spatial reuse supportJohn Crispin
Trigger the WMI call en/disabling OBSS PD when the bss config changes or we assoc to an AP that broadcasts the IE. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-27ath11k: add TWT supportJohn Crispin
Add target wait time wmi calls to the driver. En/disable the support from when the bss_config changes. We ignore the cmd completion events. Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-27ath11k: add HE supportJohn Crispin
Add basic HE support to the driver. The sband_iftype data is generated from the capabilities read from the FW. Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-27ath11k: Remove dead code while handling amsdu packetsTamizh chelvam
Remove unexecuted code while handling amsdu packets. The same logic is done before calling ath11k_dp_rx_msdu_coalesce Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-27ath11k: fix missed bw conversion in tx completionTamizh chelvam
TX rate stats for the retried packets for a station comes through tx completion events. Assigning hw reported bandwidth information directly to station's txrate bandwidth will cause below warning. Fix this warning by converting the hw reported bandwidth to mac80211 base bandwidth. [ 134.758190] PC is at cfg80211_calculate_bitrate+0x1bc/0x214 [cfg80211] [ 134.765730] LR is at cfg80211_calculate_bitrate+0x1bc/0x214 [cfg80211] [ 134.875014] [<ffffffbffca8d708>] cfg80211_calculate_bitrate+0x1bc/0x214 [cfg80211] [ 134.877192] [<ffffffbffcaa9704>] nl80211_put_sta_rate+0x54/0xf24 [cfg80211] [ 134.884829] [<ffffffbffcaa9d48>] nl80211_put_sta_rate+0x698/0xf24 [cfg80211] [ 134.891687] [<ffffffbffcaaa490>] nl80211_put_sta_rate+0xde0/0xf24 [cfg80211] [ 134.898975] [<ffffffc0004de748>] genl_lock_dumpit+0x30/0x4c [ 134.905998] [<ffffffc0004dc264>] netlink_dump+0xf4/0x248 [ 134.911291] [<ffffffc0004dc910>] __netlink_dump_start+0xe0/0x174 [ 134.916850] [<ffffffc0004df114>] genl_family_rcv_msg+0x130/0x2c0 Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-27ath11k: convert message from info to dbgJohn Crispin
We can regularly see the following message. - "ath11k c000000.wifi1: failed to find the peer with peer_id 4" This happens when the FW starts sending stats for the peer whilst the peer is not fully associated. Convert this info message to a debug one. Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-27ath11k: ignore event 0x6017John Crispin
Everytime a new peer gets associated, we see the following message in the log - ath11k c000000.wifi1: Unknown eventid: 0x6017 Ignore this event for now. We probably need to handle the event properly when we add OMI support. Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-27ath11k: add RX stats support for radiotapJohn Crispin
mac80211 expects the definition of what HE rate info is available inside a struct prepended to the skb. Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-27ftrace: Rework event_create_dir()Peter Zijlstra
Rework event_create_dir() to use an array of static data instead of function pointers where possible. The problem is that it would call the function pointer on module load before parse_args(), possibly even before jump_labels were initialized. Luckily the generated functions don't use jump_labels but it still seems fragile. It also gets in the way of changing when we make the module map executable. The generated function are basically calling trace_define_field() with a bunch of static arguments. So instead of a function, capture these arguments in a static array, avoiding the function call. Now there are a number of cases where the fields are dynamic (syscall arguments, kprobes and uprobes), in which case a static array does not work, for these we preserve the function call. Luckily all these cases are not related to modules and so we can retain the function call for them. Also fix up all broken tracepoint definitions that now generate a compile error. Tested-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20191111132458.342979914@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-17 02:28:38 +0000