| Age | Commit message (Collapse) | Author |
|---|
|
The recent patch to support passive mode converter did not take care the
phy interface configuration in PCI platform data. Hence, converting all
the PCI platform data from plat->interface to plat->phy_interface as the
default mode is meant for PHY.
Fixes: 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt")
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Tested-by: Tan, Tee Min <tee.min.tan@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Without checking for IFF_MULTICAST flag, it is wrong to assume multicast
filtering is always enabled. By checking against IFF_MULTICAST, now
the driver behaves correctly when the multicast support is toggled by below
command:-
ip link set <devname> multicast off|on
Fixes: 0efedbf11f07a ("net: stmmac: xgmac: Fix XGMAC selftests")
Signed-off-by: Tan, Tee Min <tee.min.tan@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Without checking for IFF_MULTICAST flag, it is wrong to assume multicast
filtering is always enabled. By checking against IFF_MULTICAST, now
the driver behaves correctly when the multicast support is toggled by below
command:-
ip link set <devname> multicast off|on
Fixes: 477286b53f55 ("stmmac: add GMAC4 core support")
Signed-off-by: Verma, Aashish <aashishx.verma@intel.com>
Tested-by: Tan, Tee Min <tee.min.tan@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We should always do a read of current value of XGMAC_VLAN_TAG instead of
directly overwriting the register value.
Fixes: 3cd1cfcba26e2 ("net: stmmac: Implement VLAN Hash Filtering in XGMAC")
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It should always do a read of current value of GMAC_VLAN_TAG instead of
directly overwriting the register value.
Fixes: c1be0022df0d ("net: stmmac: Add VLAN HASH filtering support in GMAC4+")
Signed-off-by: Tan, Tee Min <tee.min.tan@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The caller of XDP_SETUP_PROG has already incremented refcnt in
__bpf_prog_get(), so drivers should only increment refcnt by
num_queues - 1.
To fix the issue, update netvsc_xdp_set() to add the correct number
to refcnt.
Hold a refcnt in netvsc_xdp_set()’s other caller, netvsc_attach().
And, do the same in netvsc_vf_setxdp(). Otherwise, every time when VF is
removed and added from the host side, the refcnt will be decreased by one,
which may cause page fault when unloading xdp program.
Fixes: 351e1581395f ("hv_netvsc: Add XDP support")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 7445 switch clocking profiles do not allow us to run the IMP port at
2Gb/sec in a way that it is reliable and consistent. Make sure that the
setting is only applied to the 7278 family.
Fixes: 8f1880cbe8d0 ("net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
b53_configure_vlan() is called by the bcm_sf2 driver upon setup and
indirectly through resume as well. During the initial setup, we are
guaranteed that dev->vlan_enabled is false, so there is no change in
behavior, however during suspend, we may have enabled VLANs before, so we
do want to restore that setting.
Fixes: dad8d7c6452b ("net: dsa: b53: Properly account for VLAN filtering")
Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It forgot to reduce the value of the variable retry in a while loop
in the ethqos_configure() function. It may cause an endless loop and
without timeout.
Fixes: a7c30e62d4b8 ("net: stmmac: Add driver for Qualcomm ethqos")
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Deprecate the generic TLS cap bit, use the new TX-specific
TLS cap bit instead.
Fixes: a12ff35e0fb7 ("net/mlx5: Introduce TLS TX offload hardware bits and structures")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
For a cyclic work queue, when not requesting a completion per WQE,
a single CQE might indicate the completion of several WQEs.
However, in case some WQE in the batch causes an error, then an error
completion is issued, breaking the batch, and pointing to the offending
WQE in the wqe_counter field.
Hence, WQE-specific error CQE handling (like printing, breaking, etc...)
should be performed only for the last WQE in batch.
Fixes: 130c7b46c93d ("net/mlx5e: TX, Dump WQs wqe descriptors on CQE with error events")
Fixes: fd9b4be8002c ("net/mlx5e: RX, Support multiple outstanding UMR posts")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
SA context is allocated at mlx5_fpga_ipsec_create_sa_ctx,
however the counterpart mlx5_fpga_ipsec_delete_sa_ctx function
nullifies sa_ctx pointer without freeing the memory allocated,
hence the memory leak.
Fix by free SA context when the SA is released.
Fixes: d6c4f0298cec ("net/mlx5: Refactor accel IPSec code")
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The function mlx5_fpga_esp_validate_xfrm_attrs is wrongly used
with negative negation as zero value indicates success but it
used as failure return value instead.
Fix by remove the unary not negation operator.
Fixes: 05564d0ae075 ("net/mlx5: Add flow-steering commands for FPGA IPSec implementation")
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
free_match_list could be called when the flow table is already
locked. We need to pass this notation to tree_put_node.
It fixes the following lockdep warnning:
[ 1797.268537] ============================================
[ 1797.276837] WARNING: possible recursive locking detected
[ 1797.285101] 5.5.0-rc5+ #10 Not tainted
[ 1797.291641] --------------------------------------------
[ 1797.299917] handler10/9296 is trying to acquire lock:
[ 1797.307885] ffff889ad399a0a0 (&node->lock){++++}, at:
tree_put_node+0x1d5/0x210 [mlx5_core]
[ 1797.319694]
[ 1797.319694] but task is already holding lock:
[ 1797.330904] ffff889ad399a0a0 (&node->lock){++++}, at:
nested_down_write_ref_node.part.33+0x1a/0x60 [mlx5_core]
[ 1797.344707]
[ 1797.344707] other info that might help us debug this:
[ 1797.356952] Possible unsafe locking scenario:
[ 1797.356952]
[ 1797.368333] CPU0
[ 1797.373357] ----
[ 1797.378364] lock(&node->lock);
[ 1797.384222] lock(&node->lock);
[ 1797.390031]
[ 1797.390031] *** DEADLOCK ***
[ 1797.390031]
[ 1797.403003] May be due to missing lock nesting notation
[ 1797.403003]
[ 1797.414691] 3 locks held by handler10/9296:
[ 1797.421465] #0: ffff889cf2c5a110 (&block->cb_lock){++++}, at:
tc_setup_cb_add+0x70/0x250
[ 1797.432810] #1: ffff88a030081490 (&comp->sem){++++}, at:
mlx5_devcom_get_peer_data+0x4c/0xb0 [mlx5_core]
[ 1797.445829] #2: ffff889ad399a0a0 (&node->lock){++++}, at:
nested_down_write_ref_node.part.33+0x1a/0x60 [mlx5_core]
[ 1797.459913]
[ 1797.459913] stack backtrace:
[ 1797.469436] CPU: 1 PID: 9296 Comm: handler10 Kdump: loaded Not
tainted 5.5.0-rc5+ #10
[ 1797.480643] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS
2.4.3 01/17/2017
[ 1797.491480] Call Trace:
[ 1797.496701] dump_stack+0x96/0xe0
[ 1797.502864] __lock_acquire.cold.63+0xf8/0x212
[ 1797.510301] ? lockdep_hardirqs_on+0x250/0x250
[ 1797.517701] ? mark_held_locks+0x55/0xa0
[ 1797.524547] ? quarantine_put+0xb7/0x160
[ 1797.531422] ? lockdep_hardirqs_on+0x17d/0x250
[ 1797.538913] lock_acquire+0xd6/0x1f0
[ 1797.545529] ? tree_put_node+0x1d5/0x210 [mlx5_core]
[ 1797.553701] down_write+0x94/0x140
[ 1797.560206] ? tree_put_node+0x1d5/0x210 [mlx5_core]
[ 1797.568464] ? down_write_killable_nested+0x170/0x170
[ 1797.576925] ? del_hw_flow_group+0xde/0x1f0 [mlx5_core]
[ 1797.585629] tree_put_node+0x1d5/0x210 [mlx5_core]
[ 1797.593891] ? free_match_list.part.25+0x147/0x170 [mlx5_core]
[ 1797.603389] free_match_list.part.25+0xe0/0x170 [mlx5_core]
[ 1797.612654] _mlx5_add_flow_rules+0x17e2/0x20b0 [mlx5_core]
[ 1797.621838] ? lock_acquire+0xd6/0x1f0
[ 1797.629028] ? esw_get_prio_table+0xb0/0x3e0 [mlx5_core]
[ 1797.637981] ? alloc_insert_flow_group+0x420/0x420 [mlx5_core]
[ 1797.647459] ? try_to_wake_up+0x4c7/0xc70
[ 1797.654881] ? lock_downgrade+0x350/0x350
[ 1797.662271] ? __mutex_unlock_slowpath+0xb1/0x3f0
[ 1797.670396] ? find_held_lock+0xac/0xd0
[ 1797.677540] ? mlx5_add_flow_rules+0xdc/0x360 [mlx5_core]
[ 1797.686467] mlx5_add_flow_rules+0xdc/0x360 [mlx5_core]
[ 1797.695134] ? _mlx5_add_flow_rules+0x20b0/0x20b0 [mlx5_core]
[ 1797.704270] ? irq_exit+0xa5/0x170
[ 1797.710764] ? retint_kernel+0x10/0x10
[ 1797.717698] ? mlx5_eswitch_set_rule_source_port.isra.9+0x122/0x230
[mlx5_core]
[ 1797.728708] mlx5_eswitch_add_offloaded_rule+0x465/0x6d0 [mlx5_core]
[ 1797.738713] ? mlx5_eswitch_get_prio_range+0x30/0x30 [mlx5_core]
[ 1797.748384] ? mlx5_fc_stats_work+0x670/0x670 [mlx5_core]
[ 1797.757400] mlx5e_tc_offload_fdb_rules.isra.27+0x24/0x90 [mlx5_core]
[ 1797.767665] mlx5e_tc_add_fdb_flow+0xaf8/0xd40 [mlx5_core]
[ 1797.776886] ? mlx5e_encap_put+0xd0/0xd0 [mlx5_core]
[ 1797.785562] ? mlx5e_alloc_flow.isra.43+0x18c/0x1c0 [mlx5_core]
[ 1797.795353] __mlx5e_add_fdb_flow+0x2e2/0x440 [mlx5_core]
[ 1797.804558] ? mlx5e_tc_update_neigh_used_value+0x8c0/0x8c0
[mlx5_core]
[ 1797.815093] ? wait_for_completion+0x260/0x260
[ 1797.823272] mlx5e_configure_flower+0xe94/0x1620 [mlx5_core]
[ 1797.832792] ? __mlx5e_add_fdb_flow+0x440/0x440 [mlx5_core]
[ 1797.842096] ? down_read+0x11a/0x2e0
[ 1797.849090] ? down_write+0x140/0x140
[ 1797.856142] ? mlx5e_rep_indr_setup_block_cb+0xc0/0xc0 [mlx5_core]
[ 1797.866027] tc_setup_cb_add+0x11a/0x250
[ 1797.873339] fl_hw_replace_filter+0x25e/0x320 [cls_flower]
[ 1797.882385] ? fl_hw_destroy_filter+0x1c0/0x1c0 [cls_flower]
[ 1797.891607] fl_change+0x1d54/0x1fb6 [cls_flower]
[ 1797.899772] ? __rhashtable_insert_fast.constprop.50+0x9f0/0x9f0
[cls_flower]
[ 1797.910728] ? lock_downgrade+0x350/0x350
[ 1797.918187] ? __radix_tree_lookup+0xa5/0x130
[ 1797.926046] ? fl_set_key+0x1590/0x1590 [cls_flower]
[ 1797.934611] ? __rhashtable_insert_fast.constprop.50+0x9f0/0x9f0
[cls_flower]
[ 1797.945673] tc_new_tfilter+0xcd1/0x1240
[ 1797.953138] ? tc_del_tfilter+0xb10/0xb10
[ 1797.960688] ? avc_has_perm_noaudit+0x92/0x320
[ 1797.968721] ? avc_has_perm_noaudit+0x1df/0x320
[ 1797.976816] ? avc_has_extended_perms+0x990/0x990
[ 1797.985090] ? mark_lock+0xaa/0x9e0
[ 1797.991988] ? match_held_lock+0x1b/0x240
[ 1797.999457] ? match_held_lock+0x1b/0x240
[ 1798.006859] ? find_held_lock+0xac/0xd0
[ 1798.014045] ? symbol_put_addr+0x40/0x40
[ 1798.021317] ? rcu_read_lock_sched_held+0xd0/0xd0
[ 1798.029460] ? tc_del_tfilter+0xb10/0xb10
[ 1798.036810] rtnetlink_rcv_msg+0x4d5/0x620
[ 1798.044236] ? rtnl_bridge_getlink+0x460/0x460
[ 1798.052034] ? lockdep_hardirqs_on+0x250/0x250
[ 1798.059837] ? match_held_lock+0x1b/0x240
[ 1798.067146] ? find_held_lock+0xac/0xd0
[ 1798.074246] netlink_rcv_skb+0xc6/0x1f0
[ 1798.081339] ? rtnl_bridge_getlink+0x460/0x460
[ 1798.089104] ? netlink_ack+0x440/0x440
[ 1798.096061] netlink_unicast+0x2d4/0x3b0
[ 1798.103189] ? netlink_attachskb+0x3f0/0x3f0
[ 1798.110724] ? _copy_from_iter_full+0xda/0x370
[ 1798.118415] netlink_sendmsg+0x3ba/0x6a0
[ 1798.125478] ? netlink_unicast+0x3b0/0x3b0
[ 1798.132705] ? netlink_unicast+0x3b0/0x3b0
[ 1798.139880] sock_sendmsg+0x94/0xa0
[ 1798.146332] ____sys_sendmsg+0x36c/0x3f0
[ 1798.153251] ? copy_msghdr_from_user+0x165/0x230
[ 1798.160941] ? kernel_sendmsg+0x30/0x30
[ 1798.167738] ___sys_sendmsg+0xeb/0x150
[ 1798.174411] ? sendmsg_copy_msghdr+0x30/0x30
[ 1798.181649] ? lock_downgrade+0x350/0x350
[ 1798.188559] ? rcu_read_lock_sched_held+0xd0/0xd0
[ 1798.196239] ? __fget+0x21d/0x320
[ 1798.202335] ? do_dup2+0x2a0/0x2a0
[ 1798.208499] ? lock_downgrade+0x350/0x350
[ 1798.215366] ? __fget_light+0xd6/0xf0
[ 1798.221808] ? syscall_trace_enter+0x369/0x5d0
[ 1798.229112] __sys_sendmsg+0xd3/0x160
[ 1798.235511] ? __sys_sendmsg_sock+0x60/0x60
[ 1798.242478] ? syscall_trace_enter+0x233/0x5d0
[ 1798.249721] ? syscall_slow_exit_work+0x280/0x280
[ 1798.257211] ? do_syscall_64+0x1e/0x2e0
[ 1798.263680] do_syscall_64+0x72/0x2e0
[ 1798.269950] entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel")
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
After a number of suspend and resume cycles, it is possible for the RBUF
to be stuck in Wake-on-LAN mode, despite the MPD enable bit being
cleared which instructed the RBUF to exit that mode.
Avoid creating that problematic condition by clearing the RX_EN and
TX_EN bits in the UniMAC prior to disable the Magic Packet Detector
logic which is guaranteed to make the RBUF exit Wake-on-LAN mode.
Fixes: 83e82f4c706b ("net: systemport: add Wake-on-LAN support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It turned out that on low performance systems the original change can
cause lower tx performance. On a N3450-based mini-PC tx performance
in iperf3 was reduced from 950Mbps to ~900Mbps. Therefore effectively
revert the original change, just use pcie_set_readrq() now instead of
changing the PCIe capability register directly.
Fixes: 2df49d365498 ("r8169: remove fiddling with the PCIe max read request size")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move rx_dropped and rx_errors counters in mvneta_pcpu_stats in order to
avoid possible races updating statistics
Fixes: 562e2f467e71 ("net: mvneta: Improve the buffer allocation method for SWBM")
Fixes: dc35a10f68d3 ("net: mvneta: bm: add support for hardware buffer management")
Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Added debugfs entry to show the tls stats.
Signed-off-by: Devulapally Shiva Krishna <shiva@chelsio.com>
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Return -EAGAIN instead of -ENETDOWN to provide a slightly milder
information to user space so that an application will know to retry the
syscall when __I40E_CONFIG_BUSY bit is set on pf->state.
Fixes: b3873a5be757 ("net/i40e: Fix concurrency issues between config flow and XSK")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20200205045834.56795-2-maciej.fijalkowski@intel.com
|
|
commit cedeac9df4b8 ("qed: Add support for Timestamping the unicast
PTP packets.") handles the timestamping of L4 ptp packets only.
This patch adds driver changes to detect/timestamp both L2/L4 unicast
PTP packets.
Fixes: cedeac9df4b8 ("qed: Add support for Timestamping the unicast PTP packets.")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
GEM_MAX_TX_LEN currently resolves to 0x3FF8 for any IP version supporting
TSO with full 14bits of length field in payload descriptor. But an IP
errata causes false amba_error (bit 6 of ISR) when length in payload
descriptors is specified above 16387. The error occurs because the DMA
falsely concludes that there is not enough space in SRAM for incoming
payload. These errors were observed continuously under stress of large
packets using iperf on a version where SRAM was 16K for each queue. This
errata will be documented shortly and affects all versions since TSO
functionality was added. Hence limit the max length to 0x3FC0 (rounded).
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The IP TSO implementation does NOT require the length to be a
multiple of 8. That is only a requirement for UFO as per IP
documentation. Hence, exit macb_features_check function in the
beginning if the protocol is not UDP. Only when it is UDP,
proceed further to the alignment checks. Update comments to
reflect the same. Also remove dead code checking for protocol
TCP when calculating header length.
Fixes: 1629dd4f763c ("cadence: Add LSO support.")
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot managed to send an IPX packet through bond_alb_xmit()
and af_packet and triggered a use-after-free.
First, bond_alb_xmit() was using ipx_hdr() helper to reach
the IPX header, but ipx_hdr() was using the transport offset
instead of the network offset. In the particular syzbot
report transport offset was 0xFFFF
This patch removes ipx_hdr() since it was only (mis)used from bonding.
Then we need to make sure IPv4/IPv6/IPX headers are pulled
in skb->head before dereferencing anything.
BUG: KASAN: use-after-free in bond_alb_xmit+0x153a/0x1590 drivers/net/bonding/bond_alb.c:1452
Read of size 2 at addr ffff8801ce56dfff by task syz-executor.2/18108
(if (ipx_hdr(skb)->ipx_checksum != IPX_NO_CHECKSUM) ...)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
[<ffffffff8441fc42>] __dump_stack lib/dump_stack.c:17 [inline]
[<ffffffff8441fc42>] dump_stack+0x14d/0x20b lib/dump_stack.c:53
[<ffffffff81a7dec4>] print_address_description+0x6f/0x20b mm/kasan/report.c:282
[<ffffffff81a7e0ec>] kasan_report_error mm/kasan/report.c:380 [inline]
[<ffffffff81a7e0ec>] kasan_report mm/kasan/report.c:438 [inline]
[<ffffffff81a7e0ec>] kasan_report.cold+0x8c/0x2a0 mm/kasan/report.c:422
[<ffffffff81a7dc4f>] __asan_report_load_n_noabort+0xf/0x20 mm/kasan/report.c:469
[<ffffffff82c8c00a>] bond_alb_xmit+0x153a/0x1590 drivers/net/bonding/bond_alb.c:1452
[<ffffffff82c60c74>] __bond_start_xmit drivers/net/bonding/bond_main.c:4199 [inline]
[<ffffffff82c60c74>] bond_start_xmit+0x4f4/0x1570 drivers/net/bonding/bond_main.c:4224
[<ffffffff83baa558>] __netdev_start_xmit include/linux/netdevice.h:4525 [inline]
[<ffffffff83baa558>] netdev_start_xmit include/linux/netdevice.h:4539 [inline]
[<ffffffff83baa558>] xmit_one net/core/dev.c:3611 [inline]
[<ffffffff83baa558>] dev_hard_start_xmit+0x168/0x910 net/core/dev.c:3627
[<ffffffff83bacf35>] __dev_queue_xmit+0x1f55/0x33b0 net/core/dev.c:4238
[<ffffffff83bae3a8>] dev_queue_xmit+0x18/0x20 net/core/dev.c:4278
[<ffffffff84339189>] packet_snd net/packet/af_packet.c:3226 [inline]
[<ffffffff84339189>] packet_sendmsg+0x4919/0x70b0 net/packet/af_packet.c:3252
[<ffffffff83b1ac0c>] sock_sendmsg_nosec net/socket.c:673 [inline]
[<ffffffff83b1ac0c>] sock_sendmsg+0x12c/0x160 net/socket.c:684
[<ffffffff83b1f5a2>] __sys_sendto+0x262/0x380 net/socket.c:1996
[<ffffffff83b1f700>] SYSC_sendto net/socket.c:2008 [inline]
[<ffffffff83b1f700>] SyS_sendto+0x40/0x60 net/socket.c:2004
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The receive frame length calculation uses a wrong mask to calculate the
length of the received frames.
Per spec table 4-1 the length is contained in the FL (Frame Length)
field in bits 30:16.
This didn't show up as an issue so far since frames were limited to
1500 bytes which falls within the 11 bit window.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Our static-static calculation returns a failure if the public key is of
low order. We check for this when peers are added, and don't allow them
to be added if they're low order, except in the case where we haven't
yet been given a private key. In that case, we would defer the removal
of the peer until we're given a private key, since at that point we're
doing new static-static calculations which incur failures we can act on.
This meant, however, that we wound up removing peers rather late in the
configuration flow.
Syzkaller points out that peer_remove calls flush_workqueue, which in
turn might then wait for sending a handshake initiation to complete.
Since handshake initiation needs the static identity lock, holding the
static identity lock while calling peer_remove can result in a rare
deadlock. We have precisely this case in this situation of late-stage
peer removal based on an invalid public key. We can't drop the lock when
removing, because then incoming handshakes might interact with a bogus
static-static calculation.
While the band-aid patch for this would involve breaking up the peer
removal into two steps like wg_peer_remove_all does, in order to solve
the locking issue, there's actually a much more elegant way of fixing
this:
If the static-static calculation succeeds with one private key, it
*must* succeed with all others, because all 32-byte strings map to valid
private keys, thanks to clamping. That means we can get rid of this
silly dance and locking headaches of removing peers late in the
configuration flow, and instead just reject them early on, regardless of
whether the device has yet been assigned a private key. For the case
where the device doesn't yet have a private key, we safely use zeros
just for the purposes of checking for low order points by way of
checking the output of the calculation.
The following PoC will trigger the deadlock:
ip link add wg0 type wireguard
ip addr add 10.0.0.1/24 dev wg0
ip link set wg0 up
ping -f 10.0.0.2 &
while true; do
wg set wg0 private-key /dev/null peer AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA= allowed-ips 10.0.0.0/24 endpoint 10.0.0.3:1234
wg set wg0 private-key <(echo AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=)
done
[ 0.949105] ======================================================
[ 0.949550] WARNING: possible circular locking dependency detected
[ 0.950143] 5.5.0-debug+ #18 Not tainted
[ 0.950431] ------------------------------------------------------
[ 0.950959] wg/89 is trying to acquire lock:
[ 0.951252] ffff8880333e2128 ((wq_completion)wg-kex-wg0){+.+.}, at: flush_workqueue+0xe3/0x12f0
[ 0.951865]
[ 0.951865] but task is already holding lock:
[ 0.952280] ffff888032819bc0 (&wg->static_identity.lock){++++}, at: wg_set_device+0x95d/0xcc0
[ 0.953011]
[ 0.953011] which lock already depends on the new lock.
[ 0.953011]
[ 0.953651]
[ 0.953651] the existing dependency chain (in reverse order) is:
[ 0.954292]
[ 0.954292] -> #2 (&wg->static_identity.lock){++++}:
[ 0.954804] lock_acquire+0x127/0x350
[ 0.955133] down_read+0x83/0x410
[ 0.955428] wg_noise_handshake_create_initiation+0x97/0x700
[ 0.955885] wg_packet_send_handshake_initiation+0x13a/0x280
[ 0.956401] wg_packet_handshake_send_worker+0x10/0x20
[ 0.956841] process_one_work+0x806/0x1500
[ 0.957167] worker_thread+0x8c/0xcb0
[ 0.957549] kthread+0x2ee/0x3b0
[ 0.957792] ret_from_fork+0x24/0x30
[ 0.958234]
[ 0.958234] -> #1 ((work_completion)(&peer->transmit_handshake_work)){+.+.}:
[ 0.958808] lock_acquire+0x127/0x350
[ 0.959075] process_one_work+0x7ab/0x1500
[ 0.959369] worker_thread+0x8c/0xcb0
[ 0.959639] kthread+0x2ee/0x3b0
[ 0.959896] ret_from_fork+0x24/0x30
[ 0.960346]
[ 0.960346] -> #0 ((wq_completion)wg-kex-wg0){+.+.}:
[ 0.960945] check_prev_add+0x167/0x1e20
[ 0.961351] __lock_acquire+0x2012/0x3170
[ 0.961725] lock_acquire+0x127/0x350
[ 0.961990] flush_workqueue+0x106/0x12f0
[ 0.962280] peer_remove_after_dead+0x160/0x220
[ 0.962600] wg_set_device+0xa24/0xcc0
[ 0.962994] genl_rcv_msg+0x52f/0xe90
[ 0.963298] netlink_rcv_skb+0x111/0x320
[ 0.963618] genl_rcv+0x1f/0x30
[ 0.963853] netlink_unicast+0x3f6/0x610
[ 0.964245] netlink_sendmsg+0x700/0xb80
[ 0.964586] __sys_sendto+0x1dd/0x2c0
[ 0.964854] __x64_sys_sendto+0xd8/0x1b0
[ 0.965141] do_syscall_64+0x90/0xd9a
[ 0.965408] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 0.965769]
[ 0.965769] other info that might help us debug this:
[ 0.965769]
[ 0.966337] Chain exists of:
[ 0.966337] (wq_completion)wg-kex-wg0 --> (work_completion)(&peer->transmit_handshake_work) --> &wg->static_identity.lock
[ 0.966337]
[ 0.967417] Possible unsafe locking scenario:
[ 0.967417]
[ 0.967836] CPU0 CPU1
[ 0.968155] ---- ----
[ 0.968497] lock(&wg->static_identity.lock);
[ 0.968779] lock((work_completion)(&peer->transmit_handshake_work));
[ 0.969345] lock(&wg->static_identity.lock);
[ 0.969809] lock((wq_completion)wg-kex-wg0);
[ 0.970146]
[ 0.970146] *** DEADLOCK ***
[ 0.970146]
[ 0.970531] 5 locks held by wg/89:
[ 0.970908] #0: ffffffff827433c8 (cb_lock){++++}, at: genl_rcv+0x10/0x30
[ 0.971400] #1: ffffffff82743480 (genl_mutex){+.+.}, at: genl_rcv_msg+0x642/0xe90
[ 0.971924] #2: ffffffff827160c0 (rtnl_mutex){+.+.}, at: wg_set_device+0x9f/0xcc0
[ 0.972488] #3: ffff888032819de0 (&wg->device_update_lock){+.+.}, at: wg_set_device+0xb0/0xcc0
[ 0.973095] #4: ffff888032819bc0 (&wg->static_identity.lock){++++}, at: wg_set_device+0x95d/0xcc0
[ 0.973653]
[ 0.973653] stack backtrace:
[ 0.973932] CPU: 1 PID: 89 Comm: wg Not tainted 5.5.0-debug+ #18
[ 0.974476] Call Trace:
[ 0.974638] dump_stack+0x97/0xe0
[ 0.974869] check_noncircular+0x312/0x3e0
[ 0.975132] ? print_circular_bug+0x1f0/0x1f0
[ 0.975410] ? __kernel_text_address+0x9/0x30
[ 0.975727] ? unwind_get_return_address+0x51/0x90
[ 0.976024] check_prev_add+0x167/0x1e20
[ 0.976367] ? graph_lock+0x70/0x160
[ 0.976682] __lock_acquire+0x2012/0x3170
[ 0.976998] ? register_lock_class+0x1140/0x1140
[ 0.977323] lock_acquire+0x127/0x350
[ 0.977627] ? flush_workqueue+0xe3/0x12f0
[ 0.977890] flush_workqueue+0x106/0x12f0
[ 0.978147] ? flush_workqueue+0xe3/0x12f0
[ 0.978410] ? find_held_lock+0x2c/0x110
[ 0.978662] ? lock_downgrade+0x6e0/0x6e0
[ 0.978919] ? queue_rcu_work+0x60/0x60
[ 0.979166] ? netif_napi_del+0x151/0x3b0
[ 0.979501] ? peer_remove_after_dead+0x160/0x220
[ 0.979871] peer_remove_after_dead+0x160/0x220
[ 0.980232] wg_set_device+0xa24/0xcc0
[ 0.980516] ? deref_stack_reg+0x8e/0xc0
[ 0.980801] ? set_peer+0xe10/0xe10
[ 0.981040] ? __ww_mutex_check_waiters+0x150/0x150
[ 0.981430] ? __nla_validate_parse+0x163/0x270
[ 0.981719] ? genl_family_rcv_msg_attrs_parse+0x13f/0x310
[ 0.982078] genl_rcv_msg+0x52f/0xe90
[ 0.982348] ? genl_family_rcv_msg_attrs_parse+0x310/0x310
[ 0.982690] ? register_lock_class+0x1140/0x1140
[ 0.983049] netlink_rcv_skb+0x111/0x320
[ 0.983298] ? genl_family_rcv_msg_attrs_parse+0x310/0x310
[ 0.983645] ? netlink_ack+0x880/0x880
[ 0.983888] genl_rcv+0x1f/0x30
[ 0.984168] netlink_unicast+0x3f6/0x610
[ 0.984443] ? netlink_detachskb+0x60/0x60
[ 0.984729] ? find_held_lock+0x2c/0x110
[ 0.984976] netlink_sendmsg+0x700/0xb80
[ 0.985220] ? netlink_broadcast_filtered+0xa60/0xa60
[ 0.985533] __sys_sendto+0x1dd/0x2c0
[ 0.985763] ? __x64_sys_getpeername+0xb0/0xb0
[ 0.986039] ? sockfd_lookup_light+0x17/0x160
[ 0.986397] ? __sys_recvmsg+0x8c/0xf0
[ 0.986711] ? __sys_recvmsg_sock+0xd0/0xd0
[ 0.987018] __x64_sys_sendto+0xd8/0x1b0
[ 0.987283] ? lockdep_hardirqs_on+0x39b/0x5a0
[ 0.987666] do_syscall_64+0x90/0xd9a
[ 0.987903] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 0.988223] RIP: 0033:0x7fe77c12003e
[ 0.988508] Code: c3 8b 07 85 c0 75 24 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 4
[ 0.989666] RSP: 002b:00007fffada2ed58 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[ 0.990137] RAX: ffffffffffffffda RBX: 00007fe77c159d48 RCX: 00007fe77c12003e
[ 0.990583] RDX: 0000000000000040 RSI: 000055fd1d38e020 RDI: 0000000000000004
[ 0.991091] RBP: 000055fd1d38e020 R08: 000055fd1cb63358 R09: 000000000000000c
[ 0.991568] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000002c
[ 0.992014] R13: 0000000000000004 R14: 000055fd1d38e020 R15: 0000000000000001
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the unlikely case a new node could not be allocated, we need to
remove @newnode from @peer->allowedips_list before freeing it.
syzbot reported:
BUG: KASAN: use-after-free in __list_del_entry_valid+0xdc/0xf5 lib/list_debug.c:54
Read of size 8 at addr ffff88809881a538 by task syz-executor.4/30133
CPU: 0 PID: 30133 Comm: syz-executor.4 Not tainted 5.5.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
__kasan_report.cold+0x1b/0x32 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:639
__asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
__list_del_entry_valid+0xdc/0xf5 lib/list_debug.c:54
__list_del_entry include/linux/list.h:132 [inline]
list_del include/linux/list.h:146 [inline]
root_remove_peer_lists+0x24f/0x4b0 drivers/net/wireguard/allowedips.c:65
wg_allowedips_free+0x232/0x390 drivers/net/wireguard/allowedips.c:300
wg_peer_remove_all+0xd5/0x620 drivers/net/wireguard/peer.c:187
wg_set_device+0xd01/0x1350 drivers/net/wireguard/netlink.c:542
genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:717 [inline]
genl_rcv_msg+0x67d/0xea0 net/netlink/genetlink.c:734
netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
genl_rcv+0x29/0x40 net/netlink/genetlink.c:745
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:672
____sys_sendmsg+0x753/0x880 net/socket.c:2343
___sys_sendmsg+0x100/0x170 net/socket.c:2397
__sys_sendmsg+0x105/0x1d0 net/socket.c:2430
__do_sys_sendmsg net/socket.c:2439 [inline]
__se_sys_sendmsg net/socket.c:2437 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x45b399
Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f99a9bcdc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f99a9bce6d4 RCX: 000000000045b399
RDX: 0000000000000000 RSI: 0000000020001340 RDI: 0000000000000003
RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000004
R13: 00000000000009ba R14: 00000000004cb2b8 R15: 0000000000000009
Allocated by task 30103:
save_stack+0x23/0x90 mm/kasan/common.c:72
set_track mm/kasan/common.c:80 [inline]
__kasan_kmalloc mm/kasan/common.c:513 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486
kasan_kmalloc+0x9/0x10 mm/kasan/common.c:527
kmem_cache_alloc_trace+0x158/0x790 mm/slab.c:3551
kmalloc include/linux/slab.h:556 [inline]
kzalloc include/linux/slab.h:670 [inline]
add+0x70a/0x1970 drivers/net/wireguard/allowedips.c:236
wg_allowedips_insert_v4+0xf6/0x160 drivers/net/wireguard/allowedips.c:320
set_allowedip drivers/net/wireguard/netlink.c:343 [inline]
set_peer+0xfb9/0x1150 drivers/net/wireguard/netlink.c:468
wg_set_device+0xbd4/0x1350 drivers/net/wireguard/netlink.c:591
genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:717 [inline]
genl_rcv_msg+0x67d/0xea0 net/netlink/genetlink.c:734
netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
genl_rcv+0x29/0x40 net/netlink/genetlink.c:745
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:672
____sys_sendmsg+0x753/0x880 net/socket.c:2343
___sys_sendmsg+0x100/0x170 net/socket.c:2397
__sys_sendmsg+0x105/0x1d0 net/socket.c:2430
__do_sys_sendmsg net/socket.c:2439 [inline]
__se_sys_sendmsg net/socket.c:2437 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 30103:
save_stack+0x23/0x90 mm/kasan/common.c:72
set_track mm/kasan/common.c:80 [inline]
kasan_set_free_info mm/kasan/common.c:335 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:474
kasan_slab_free+0xe/0x10 mm/kasan/common.c:483
__cache_free mm/slab.c:3426 [inline]
kfree+0x10a/0x2c0 mm/slab.c:3757
add+0x12d2/0x1970 drivers/net/wireguard/allowedips.c:266
wg_allowedips_insert_v4+0xf6/0x160 drivers/net/wireguard/allowedips.c:320
set_allowedip drivers/net/wireguard/netlink.c:343 [inline]
set_peer+0xfb9/0x1150 drivers/net/wireguard/netlink.c:468
wg_set_device+0xbd4/0x1350 drivers/net/wireguard/netlink.c:591
genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:717 [inline]
genl_rcv_msg+0x67d/0xea0 net/netlink/genetlink.c:734
netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
genl_rcv+0x29/0x40 net/netlink/genetlink.c:745
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:672
____sys_sendmsg+0x753/0x880 net/socket.c:2343
___sys_sendmsg+0x100/0x170 net/socket.c:2397
__sys_sendmsg+0x105/0x1d0 net/socket.c:2430
__do_sys_sendmsg net/socket.c:2439 [inline]
__se_sys_sendmsg net/socket.c:2437 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff88809881a500
which belongs to the cache kmalloc-64 of size 64
The buggy address is located 56 bytes inside of
64-byte region [ffff88809881a500, ffff88809881a540)
The buggy address belongs to the page:
page:ffffea0002620680 refcount:1 mapcount:0 mapping:ffff8880aa400380 index:0x0
raw: 00fffe0000000200 ffffea000250b748 ffffea000254bac8 ffff8880aa400380
raw: 0000000000000000 ffff88809881a000 0000000100000020 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88809881a400: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff88809881a480: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
>ffff88809881a500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
^
ffff88809881a580: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff88809881a600: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: wireguard@lists.zx2c4.com
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
drivers/net/netdevsim/dev.c:937:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Generated by: scripts/coccinelle/api/ptr_ret.cocci
Fixes: 6556ff32f12d ("netdevsim: use IS_ERR instead of IS_ERR_OR_NULL for debugfs")
CC: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 0ce5ebd24d25 ("mfd: ioc3: Add driver for SGI IOC3 chip") moved
request_irq() from ioc3_open into probe function, but forgot to remove
free_irq() from ioc3_close.
Fixes: 0ce5ebd24d25 ("mfd: ioc3: Add driver for SGI IOC3 chip")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Use after free in rxrpc_put_local(), from David Howells.
2) Fix 64-bit division error in mlxsw, from Nathan Chancellor.
3) Make sure we clear various bits of TCP state in response to
tcp_disconnect(). From Eric Dumazet.
4) Fix netlink attribute policy in cls_rsvp, from Eric Dumazet.
5) txtimer must be deleted in stmmac suspend(), from Nicolin Chen.
6) Fix TC queue mapping in bnxt_en driver, from Michael Chan.
7) Various netdevsim fixes from Taehee Yoo (use of uninitialized data,
snapshot panics, stack out of bounds, etc.)
8) cls_tcindex changes hash table size after allocating the table, fix
from Cong Wang.
9) Fix regression in the enforcement of session ID uniqueness in l2tp.
We only have to enforce uniqueness for IP based tunnels not UDP
ones. From Ridge Kennedy.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
gtp: use __GFP_NOWARN to avoid memalloc warning
l2tp: Allow duplicate session creation with UDP
r8152: Add MAC passthrough support to new device
net_sched: fix an OOB access in cls_tcindex
qed: Remove set but not used variable 'p_link'
tc-testing: add missing 'nsPlugin' to basic.json
tc-testing: fix eBPF tests failure on linux fresh clones
net: hsr: fix possible NULL deref in hsr_handle_frame()
netdevsim: remove unused sdev code
netdevsim: use __GFP_NOWARN to avoid memalloc warning
netdevsim: use IS_ERR instead of IS_ERR_OR_NULL for debugfs
netdevsim: fix stack-out-of-bounds in nsim_dev_debugfs_init()
netdevsim: fix panic in nsim_dev_take_snapshot_write()
netdevsim: disable devlink reload when resources are being used
netdevsim: fix using uninitialized resources
bnxt_en: Fix TC queue mapping.
bnxt_en: Fix logic that disables Bus Master during firmware reset.
bnxt_en: Fix RDMA driver failure with SRIOV after firmware reset.
bnxt_en: Refactor logic to re-enable SRIOV after firmware reset detected.
net: stmmac: Delete txtimer in suspend()
...
|
|
gtp hashtable size is received by user-space.
So, this hashtable size could be too large. If so, kmalloc will internally
print a warning message.
This warning message is actually not necessary for the gtp module.
So, this patch adds __GFP_NOWARN to avoid this message.
Splat looks like:
[ 2171.200049][ T1860] WARNING: CPU: 1 PID: 1860 at mm/page_alloc.c:4713 __alloc_pages_nodemask+0x2f3/0x740
[ 2171.238885][ T1860] Modules linked in: gtp veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv]
[ 2171.262680][ T1860] CPU: 1 PID: 1860 Comm: gtp-link Not tainted 5.5.0+ #321
[ 2171.263567][ T1860] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 2171.264681][ T1860] RIP: 0010:__alloc_pages_nodemask+0x2f3/0x740
[ 2171.265332][ T1860] Code: 64 fe ff ff 65 48 8b 04 25 c0 0f 02 00 48 05 f0 12 00 00 41 be 01 00 00 00 49 89 47 0
[ 2171.267301][ T1860] RSP: 0018:ffff8880b51af1f0 EFLAGS: 00010246
[ 2171.268320][ T1860] RAX: ffffed1016a35e43 RBX: 0000000000000000 RCX: 0000000000000000
[ 2171.269517][ T1860] RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000000000
[ 2171.270305][ T1860] RBP: 0000000000040cc0 R08: ffffed1018893109 R09: dffffc0000000000
[ 2171.275973][ T1860] R10: 0000000000000001 R11: ffffed1018893108 R12: 1ffff11016a35e43
[ 2171.291039][ T1860] R13: 000000000000000b R14: 000000000000000b R15: 00000000000f4240
[ 2171.292328][ T1860] FS: 00007f53cbc83740(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000
[ 2171.293409][ T1860] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2171.294586][ T1860] CR2: 000055f540014508 CR3: 00000000b49f2004 CR4: 00000000000606e0
[ 2171.295424][ T1860] Call Trace:
[ 2171.295756][ T1860] ? mark_held_locks+0xa5/0xe0
[ 2171.296659][ T1860] ? __alloc_pages_slowpath+0x21b0/0x21b0
[ 2171.298283][ T1860] ? gtp_encap_enable_socket+0x13e/0x400 [gtp]
[ 2171.298962][ T1860] ? alloc_pages_current+0xc1/0x1a0
[ 2171.299475][ T1860] kmalloc_order+0x22/0x80
[ 2171.299936][ T1860] kmalloc_order_trace+0x1d/0x140
[ 2171.300437][ T1860] __kmalloc+0x302/0x3a0
[ 2171.300896][ T1860] gtp_newlink+0x293/0xba0 [gtp]
[ ... ]
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Device 0xa387 also supports MAC passthrough, therefore add it to the
whitelst.
BugLink: https://bugs.launchpad.net/bugs/1827961/comments/30
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/ethernet/qlogic/qed/qed_cxt.c: In function 'qed_qm_init_pf':
drivers/net/ethernet/qlogic/qed/qed_cxt.c:1401:29: warning:
variable 'p_link' set but not used [-Wunused-but-set-variable]
commit 92fae6fb231f ("qed: FW 8.42.2.0 Queue Manager changes")
leave behind this unused variable.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Merge more updates from Andrew Morton:
"The rest of MM and the rest of everything else: hotfixes, ipc, misc,
procfs, lib, cleanups, arm"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (67 commits)
ARM: dma-api: fix max_pfn off-by-one error in __dma_supported()
treewide: remove redundant IS_ERR() before error code check
include/linux/cpumask.h: don't calculate length of the input string
lib: new testcases for bitmap_parse{_user}
lib: rework bitmap_parse()
lib: make bitmap_parse_user a wrapper on bitmap_parse
lib: add test for bitmap_parse()
bitops: more BITS_TO_* macros
lib/string: add strnchrnul()
proc: convert everything to "struct proc_ops"
proc: decouple proc from VFS with "struct proc_ops"
asm-generic/tlb: provide MMU_GATHER_TABLE_FREE
asm-generic/tlb: rename HAVE_MMU_GATHER_NO_GATHER
asm-generic/tlb: rename HAVE_MMU_GATHER_PAGE_SIZE
asm-generic/tlb: rename HAVE_RCU_TABLE_FREE
asm-generic/tlb: add missing CONFIG symbol
asm-gemeric/tlb: remove stray function declarations
asm-generic/tlb: avoid potential double flush
mm/mmu_gather: invalidate TLB correctly on batch allocation failure and flush
powerpc/mmu_gather: enable RCU_TABLE_FREE even for !SMP case
...
|
|
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in
seq_file.h.
Conversion rule is:
llseek => proc_lseek
unlocked_ioctl => proc_ioctl
xxx => proc_xxx
delete ".owner = THIS_MODULE" line
[akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c]
[sfr@canb.auug.org.au: fix kernel/sched/psi.c]
Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au
Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
sdev.c code is merged into dev.c and is not used anymore.
it would be removed.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
vfnum buffer size and binary_len buffer size is received by user-space.
So, this buffer size could be too large. If so, kmalloc will internally
print a warning message.
This warning message is actually not necessary for the netdevsim module.
So, this patch adds __GFP_NOWARN.
Test commands:
modprobe netdevsim
echo 1 > /sys/bus/netdevsim/new_device
echo 1000000000 > /sys/devices/netdevsim1/sriov_numvfs
Splat looks like:
[ 357.847266][ T1000] WARNING: CPU: 0 PID: 1000 at mm/page_alloc.c:4738 __alloc_pages_nodemask+0x2f3/0x740
[ 357.850273][ T1000] Modules linked in: netdevsim veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrx
[ 357.852989][ T1000] CPU: 0 PID: 1000 Comm: bash Tainted: G B 5.5.0-rc5+ #270
[ 357.854334][ T1000] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 357.855703][ T1000] RIP: 0010:__alloc_pages_nodemask+0x2f3/0x740
[ 357.856669][ T1000] Code: 64 fe ff ff 65 48 8b 04 25 c0 0f 02 00 48 05 f0 12 00 00 41 be 01 00 00 00 49 89 47 0
[ 357.860272][ T1000] RSP: 0018:ffff8880b7f47bd8 EFLAGS: 00010246
[ 357.861009][ T1000] RAX: ffffed1016fe8f80 RBX: 1ffff11016fe8fae RCX: 0000000000000000
[ 357.861843][ T1000] RDX: 0000000000000000 RSI: 0000000000000017 RDI: 0000000000000000
[ 357.862661][ T1000] RBP: 0000000000040dc0 R08: 1ffff11016fe8f67 R09: dffffc0000000000
[ 357.863509][ T1000] R10: ffff8880b7f47d68 R11: fffffbfff2798180 R12: 1ffff11016fe8f80
[ 357.864355][ T1000] R13: 0000000000000017 R14: 0000000000000017 R15: ffff8880c2038d68
[ 357.865178][ T1000] FS: 00007fd9a5b8c740(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000
[ 357.866248][ T1000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 357.867531][ T1000] CR2: 000055ce01ba8100 CR3: 00000000b7dbe005 CR4: 00000000000606f0
[ 357.868972][ T1000] Call Trace:
[ 357.869423][ T1000] ? lock_contended+0xcd0/0xcd0
[ 357.870001][ T1000] ? __alloc_pages_slowpath+0x21d0/0x21d0
[ 357.870673][ T1000] ? _kstrtoull+0x76/0x160
[ 357.871148][ T1000] ? alloc_pages_current+0xc1/0x1a0
[ 357.871704][ T1000] kmalloc_order+0x22/0x80
[ 357.872184][ T1000] kmalloc_order_trace+0x1d/0x140
[ 357.872733][ T1000] __kmalloc+0x302/0x3a0
[ 357.873204][ T1000] nsim_bus_dev_numvfs_store+0x1ab/0x260 [netdevsim]
[ 357.873919][ T1000] ? kernfs_get_active+0x12c/0x180
[ 357.874459][ T1000] ? new_device_store+0x450/0x450 [netdevsim]
[ 357.875111][ T1000] ? kernfs_get_parent+0x70/0x70
[ 357.875632][ T1000] ? sysfs_file_ops+0x160/0x160
[ 357.876152][ T1000] kernfs_fop_write+0x276/0x410
[ 357.876680][ T1000] ? __sb_start_write+0x1ba/0x2e0
[ 357.877225][ T1000] vfs_write+0x197/0x4a0
[ 357.877671][ T1000] ksys_write+0x141/0x1d0
[ ... ]
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 79579220566c ("netdevsim: add SR-IOV functionality")
Fixes: 82c93a87bf8b ("netdevsim: implement couple of testing devlink health reporters")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Debugfs APIs return valid pointer or error pointer. it doesn't return NULL.
So, using IS_ERR is enough, not using IS_ERR_OR_NULL.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When netdevsim dev is being created, a debugfs directory is created.
The variable "dev_ddir_name" is 16bytes device name pointer and device
name is "netdevsim<dev id>".
The maximum dev id length is 10.
So, 16bytes for device name isn't enough.
Test commands:
modprobe netdevsim
echo "1000000000 0" > /sys/bus/netdevsim/new_device
Splat looks like:
[ 249.622710][ T900] BUG: KASAN: stack-out-of-bounds in number+0x824/0x880
[ 249.623658][ T900] Write of size 1 at addr ffff88804c527988 by task bash/900
[ 249.624521][ T900]
[ 249.624830][ T900] CPU: 1 PID: 900 Comm: bash Not tainted 5.5.0+ #322
[ 249.625691][ T900] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 249.626712][ T900] Call Trace:
[ 249.627103][ T900] dump_stack+0x96/0xdb
[ 249.627639][ T900] ? number+0x824/0x880
[ 249.628173][ T900] print_address_description.constprop.5+0x1be/0x360
[ 249.629022][ T900] ? number+0x824/0x880
[ 249.629569][ T900] ? number+0x824/0x880
[ 249.630105][ T900] __kasan_report+0x12a/0x170
[ 249.630717][ T900] ? number+0x824/0x880
[ 249.631201][ T900] kasan_report+0xe/0x20
[ 249.631723][ T900] number+0x824/0x880
[ 249.632235][ T900] ? put_dec+0xa0/0xa0
[ 249.632716][ T900] ? rcu_read_lock_sched_held+0x90/0xc0
[ 249.633392][ T900] vsnprintf+0x63c/0x10b0
[ 249.633983][ T900] ? pointer+0x5b0/0x5b0
[ 249.634543][ T900] ? mark_lock+0x11d/0xc40
[ 249.635200][ T900] sprintf+0x9b/0xd0
[ 249.635750][ T900] ? scnprintf+0xe0/0xe0
[ 249.636370][ T900] nsim_dev_probe+0x63c/0xbf0 [netdevsim]
[ ... ]
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Fixes: ab1d0cc004d7 ("netdevsim: change debugfs tree topology")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nsim_dev_take_snapshot_write() uses nsim_dev and nsim_dev->dummy_region.
So, during this function, these data shouldn't be removed.
But there is no protecting stuff in this function.
There are two similar cases.
1. reload case
reload could be called during nsim_dev_take_snapshot_write().
When reload is being executed, nsim_dev_reload_down() is called and it
calls nsim_dev_reload_destroy(). nsim_dev_reload_destroy() calls
devlink_region_destroy() to destroy nsim_dev->dummy_region.
So, during nsim_dev_take_snapshot_write(), nsim_dev->dummy_region()
would be removed.
At this point, snapshot_write() would access freed pointer.
In order to fix this case, take_snapshot file will be removed before
devlink_region_destroy().
The take_snapshot file will be re-created by ->reload_up().
2. del_device_store case
del_device_store() also could call nsim_dev_reload_destroy()
during nsim_dev_take_snapshot_write(). If so, panic would occur.
This problem is actually the same problem with the first case.
So, this problem will be fixed by the first case's solution.
Test commands:
modprobe netdevsim
while :
do
echo 1 > /sys/bus/netdevsim/new_device &
echo 1 > /sys/bus/netdevsim/del_device &
devlink dev reload netdevsim/netdevsim1 &
echo 1 > /sys/kernel/debug/netdevsim/netdevsim1/take_snapshot &
done
Splat looks like:
[ 45.564513][ T975] general protection fault, probably for non-canonical address 0xdffffc000000003a: 0000 [#1] SMP DEI
[ 45.566131][ T975] KASAN: null-ptr-deref in range [0x00000000000001d0-0x00000000000001d7]
[ 45.566135][ T975] CPU: 1 PID: 975 Comm: bash Not tainted 5.5.0+ #322
[ 45.569020][ T975] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 45.569026][ T975] RIP: 0010:__mutex_lock+0x10a/0x14b0
[ 45.570518][ T975] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f
[ 45.570522][ T975] RSP: 0018:ffff888046ccfbf0 EFLAGS: 00010206
[ 45.572305][ T975] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 45.572308][ T975] RDX: 000000000000003a RSI: ffffffffac926440 RDI: 00000000000001d0
[ 45.576843][ T975] RBP: ffff888046ccfd70 R08: ffffffffab610645 R09: 0000000000000000
[ 45.576847][ T975] R10: ffff888046ccfd90 R11: ffffed100d6360ad R12: 0000000000000000
[ 45.578471][ T975] R13: dffffc0000000000 R14: ffffffffae1976c0 R15: 0000000000000168
[ 45.578475][ T975] FS: 00007f614d6e7740(0000) GS:ffff88806c400000(0000) knlGS:0000000000000000
[ 45.581492][ T975] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 45.582942][ T975] CR2: 00005618677d1cf0 CR3: 000000005fb9c002 CR4: 00000000000606e0
[ 45.584543][ T975] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 45.586633][ T975] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 45.589889][ T975] Call Trace:
[ 45.591445][ T975] ? devlink_region_snapshot_create+0x55/0x4a0
[ 45.601250][ T975] ? mutex_lock_io_nested+0x1380/0x1380
[ 45.602817][ T975] ? mutex_lock_io_nested+0x1380/0x1380
[ 45.603875][ T975] ? mark_held_locks+0xa5/0xe0
[ 45.604769][ T975] ? _raw_spin_unlock_irqrestore+0x2d/0x50
[ 45.606147][ T975] ? __mutex_unlock_slowpath+0xd0/0x670
[ 45.607723][ T975] ? crng_backtrack_protect+0x80/0x80
[ 45.613530][ T975] ? wait_for_completion+0x390/0x390
[ 45.615152][ T975] ? devlink_region_snapshot_create+0x55/0x4a0
[ 45.616834][ T975] devlink_region_snapshot_create+0x55/0x4a0
[ ... ]
Fixes: 4418f862d675 ("netdevsim: implement support for devlink region and snapshots")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
devlink reload destroys resources and allocates resources again.
So, when devices and ports resources are being used, devlink reload
function should not be executed. In order to avoid this race, a new
lock is added and new_port() and del_port() call devlink_reload_disable()
and devlink_reload_enable().
Thread0 Thread1
{new/del}_port() {new/del}_port()
devlink_reload_disable()
devlink_reload_disable()
devlink_reload_enable()
//here
devlink_reload_enable()
Before Thread1's devlink_reload_enable(), the devlink is already allowed
to execute reload because Thread0 allows it. devlink reload disable/enable
variable type is bool. So the above case would exist.
So, disable/enable should be executed atomically.
In order to do that, a new lock is used.
Test commands:
modprobe netdevsim
echo 1 > /sys/bus/netdevsim/new_device
while :
do
echo 1 > /sys/devices/netdevsim1/new_port &
echo 1 > /sys/devices/netdevsim1/del_port &
devlink dev reload netdevsim/netdevsim1 &
done
Splat looks like:
[ 23.342145][ T932] DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock))
[ 23.342159][ T932] WARNING: CPU: 0 PID: 932 at kernel/locking/mutex-debug.c:103 mutex_destroy+0xc7/0xf0
[ 23.344182][ T932] Modules linked in: netdevsim openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_dx
[ 23.346485][ T932] CPU: 0 PID: 932 Comm: devlink Not tainted 5.5.0+ #322
[ 23.347696][ T932] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 23.348893][ T932] RIP: 0010:mutex_destroy+0xc7/0xf0
[ 23.349505][ T932] Code: e0 07 83 c0 03 38 d0 7c 04 84 d2 75 2e 8b 05 00 ac b0 02 85 c0 75 8b 48 c7 c6 00 5e 07 96 40
[ 23.351887][ T932] RSP: 0018:ffff88806208f810 EFLAGS: 00010286
[ 23.353963][ T932] RAX: dffffc0000000008 RBX: ffff888067f6f2c0 RCX: ffffffff942c4bd4
[ 23.355222][ T932] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff96dac5b4
[ 23.356169][ T932] RBP: ffff888067f6f000 R08: fffffbfff2d235a5 R09: fffffbfff2d235a5
[ 23.357160][ T932] R10: 0000000000000001 R11: fffffbfff2d235a4 R12: ffff888067f6f208
[ 23.358288][ T932] R13: ffff88806208fa70 R14: ffff888067f6f000 R15: ffff888069ce3800
[ 23.359307][ T932] FS: 00007fe2a3876740(0000) GS:ffff88806c000000(0000) knlGS:0000000000000000
[ 23.360473][ T932] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 23.361319][ T932] CR2: 00005561357aa000 CR3: 000000005227a006 CR4: 00000000000606f0
[ 23.362323][ T932] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 23.363417][ T932] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 23.364414][ T932] Call Trace:
[ 23.364828][ T932] nsim_dev_reload_destroy+0x77/0xb0 [netdevsim]
[ 23.365655][ T932] nsim_dev_reload_down+0x84/0xb0 [netdevsim]
[ 23.366433][ T932] devlink_reload+0xb1/0x350
[ 23.367010][ T932] genl_rcv_msg+0x580/0xe90
[ ...]
[ 23.531729][ T1305] kernel BUG at lib/list_debug.c:53!
[ 23.532523][ T1305] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 23.533467][ T1305] CPU: 2 PID: 1305 Comm: bash Tainted: G W 5.5.0+ #322
[ 23.534962][ T1305] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 23.536503][ T1305] RIP: 0010:__list_del_entry_valid+0xe6/0x150
[ 23.538346][ T1305] Code: 89 ea 48 c7 c7 00 73 1e 96 e8 df f7 4c ff 0f 0b 48 c7 c7 60 73 1e 96 e8 d1 f7 4c ff 0f 0b 44
[ 23.541068][ T1305] RSP: 0018:ffff888047c27b58 EFLAGS: 00010282
[ 23.542001][ T1305] RAX: 0000000000000054 RBX: ffff888067f6f318 RCX: 0000000000000000
[ 23.543051][ T1305] RDX: 0000000000000054 RSI: 0000000000000008 RDI: ffffed1008f84f61
[ 23.544072][ T1305] RBP: ffff88804aa0fca0 R08: ffffed100d940539 R09: ffffed100d940539
[ 23.545085][ T1305] R10: 0000000000000001 R11: ffffed100d940538 R12: ffff888047c27cb0
[ 23.546422][ T1305] R13: ffff88806208b840 R14: ffffffff981976c0 R15: ffff888067f6f2c0
[ 23.547406][ T1305] FS: 00007f76c0431740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000
[ 23.548527][ T1305] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 23.549389][ T1305] CR2: 00007f5048f1a2f8 CR3: 000000004b310006 CR4: 00000000000606e0
[ 23.550636][ T1305] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 23.551578][ T1305] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 23.552597][ T1305] Call Trace:
[ 23.553004][ T1305] mutex_remove_waiter+0x101/0x520
[ 23.553646][ T1305] __mutex_lock+0xac7/0x14b0
[ 23.554218][ T1305] ? nsim_dev_port_del+0x4e/0x140 [netdevsim]
[ 23.554908][ T1305] ? mutex_lock_io_nested+0x1380/0x1380
[ 23.555570][ T1305] ? _parse_integer+0xf0/0xf0
[ 23.556043][ T1305] ? kstrtouint+0x86/0x110
[ 23.556504][ T1305] ? nsim_dev_port_del+0x4e/0x140 [netdevsim]
[ 23.557133][ T1305] nsim_dev_port_del+0x4e/0x140 [netdevsim]
[ 23.558024][ T1305] del_port_store+0xcc/0xf0 [netdevsim]
[ ... ]
Fixes: 75ba029f3c07 ("netdevsim: implement proper devlink reload")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When module is being initialized, __init() calls bus_register() and
driver_register().
These functions internally create various resources and sysfs files.
The sysfs files are used for basic operations(add/del device).
/sys/bus/netdevsim/new_device
/sys/bus/netdevsim/del_device
These sysfs files use netdevsim resources, they are mostly allocated
and initialized in ->probe() function, which is nsim_dev_probe().
But, sysfs files could be executed before ->probe() is finished.
So, accessing uninitialized data would occur.
Another problem is very similar.
/sys/bus/netdevsim/new_device internally creates sysfs files.
/sys/devices/netdevsim<id>/new_port
/sys/devices/netdevsim<id>/del_port
These sysfs files also use netdevsim resources, they are mostly allocated
and initialized in creating device routine, which is nsim_bus_dev_new().
But they also could be executed before nsim_bus_dev_new() is finished.
So, accessing uninitialized data would occur.
To fix these problems, this patch adds flags, which means whether the
operation is finished or not.
The flag variable 'nsim_bus_enable' means whether netdevsim bus was
initialized or not.
This is protected by nsim_bus_dev_list_lock.
The flag variable 'nsim_bus_dev->init' means whether nsim_bus_dev was
initialized or not.
This could be used in {new/del}_port_store() with no lock.
Test commands:
#SHELL1
modprobe netdevsim
while :
do
echo "1 1" > /sys/bus/netdevsim/new_device
echo "1 1" > /sys/bus/netdevsim/del_device
done
#SHELL2
while :
do
echo 1 > /sys/devices/netdevsim1/new_port
echo 1 > /sys/devices/netdevsim1/del_port
done
Splat looks like:
[ 47.508954][ T1008] general protection fault, probably for non-canonical address 0xdffffc0000000021: 0000 I
[ 47.510793][ T1008] KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f]
[ 47.511963][ T1008] CPU: 2 PID: 1008 Comm: bash Not tainted 5.5.0+ #322
[ 47.512823][ T1008] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 47.514041][ T1008] RIP: 0010:__mutex_lock+0x10a/0x14b0
[ 47.514699][ T1008] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f
[ 47.517163][ T1008] RSP: 0018:ffff888059b4fbb0 EFLAGS: 00010206
[ 47.517802][ T1008] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 47.518941][ T1008] RDX: 0000000000000021 RSI: ffffffff85926440 RDI: 0000000000000108
[ 47.519732][ T1008] RBP: ffff888059b4fd30 R08: ffffffffc073fad0 R09: 0000000000000000
[ 47.520729][ T1008] R10: ffff888059b4fd50 R11: ffff88804bb38040 R12: 0000000000000000
[ 47.521702][ T1008] R13: dffffc0000000000 R14: ffffffff871976c0 R15: 00000000000000a0
[ 47.522760][ T1008] FS: 00007fd4be05a740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000
[ 47.523877][ T1008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 47.524627][ T1008] CR2: 0000561c82b69cf0 CR3: 0000000065dd6004 CR4: 00000000000606e0
[ 47.527662][ T1008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 47.528604][ T1008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 47.529531][ T1008] Call Trace:
[ 47.529874][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim]
[ 47.530470][ T1008] ? mutex_lock_io_nested+0x1380/0x1380
[ 47.531018][ T1008] ? _kstrtoull+0x76/0x160
[ 47.531449][ T1008] ? _parse_integer+0xf0/0xf0
[ 47.531874][ T1008] ? kernfs_fop_write+0x1cf/0x410
[ 47.532330][ T1008] ? sysfs_file_ops+0x160/0x160
[ 47.532773][ T1008] ? kstrtouint+0x86/0x110
[ 47.533168][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim]
[ 47.533721][ T1008] nsim_dev_port_add+0x50/0x150 [netdevsim]
[ 47.534336][ T1008] ? sysfs_file_ops+0x160/0x160
[ 47.534858][ T1008] new_port_store+0x99/0xb0 [netdevsim]
[ 47.535439][ T1008] ? del_port_store+0xb0/0xb0 [netdevsim]
[ 47.536035][ T1008] ? sysfs_file_ops+0x112/0x160
[ 47.536544][ T1008] ? sysfs_kf_write+0x3b/0x180
[ 47.537029][ T1008] kernfs_fop_write+0x276/0x410
[ 47.537548][ T1008] ? __sb_start_write+0x215/0x2e0
[ 47.538110][ T1008] vfs_write+0x197/0x4a0
[ ... ]
Fixes: f9d9db47d3ba ("netdevsim: add bus attributes to add new and delete devices")
Fixes: 794b2c05ca1c ("netdevsim: extend device attrs to support port addition and deletion")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver currently only calls netdev_set_tc_queue when the number of
TCs is greater than 1. Instead, the comparison should be greater than
or equal to 1. Even with 1 TC, we need to set the queue mapping.
This bug can cause warnings when the number of TCs is changed back to 1.
Fixes: 7809592d3e2e ("bnxt_en: Enable MSIX early in bnxt_init_one().")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current logic that calls pci_disable_device() in __bnxt_close_nic()
during firmware reset is flawed. If firmware is still alive, we're
disabling the device too early, causing some firmware commands to
not reach the firmware.
Fix it by moving the logic to bnxt_reset_close(). If firmware is
in fatal condition, we call pci_disable_device() before we free
any of the rings to prevent DMA corruption of the freed rings. If
firmware is still alive, we call pci_disable_device() after the
last firmware message has been sent.
Fixes: 3bc7d4a352ef ("bnxt_en: Add BNXT_STATE_IN_FW_RESET state.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bnxt_ulp_start() needs to be called before SRIOV is re-enabled after
firmware reset. Re-enabling SRIOV may consume all the resources and
may cause the RDMA driver to fail to get MSIX and other resources.
Fix it by calling bnxt_ulp_start() first before calling
bnxt_reenable_sriov().
We re-arrange the logic so that we call bnxt_ulp_start() and
bnxt_reenable_sriov() in proper sequence in bnxt_fw_reset_task() and
bnxt_open(). The former is the normal coordinated firmware reset sequence
and the latter is firmware reset while the function is down. This new
logic is now more straight forward and will now fix both scenarios.
Fixes: f3a6d206c25a ("bnxt_en: Call bnxt_ulp_stop()/bnxt_ulp_start() during error recovery.")
Reported-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Put the current logic in bnxt_open() to re-enable SRIOV after detecting
firmware reset into a new function bnxt_reenable_sriov(). This call
needs to be invoked in the firmware reset path also in the next patch.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When running v5.5 with a rootfs on NFS, memory abort may happen in
the system resume stage:
Unable to handle kernel paging request at virtual address dead00000000012a
[dead00000000012a] address between user and kernel address ranges
pc : run_timer_softirq+0x334/0x3d8
lr : run_timer_softirq+0x244/0x3d8
x1 : ffff800011cafe80 x0 : dead000000000122
Call trace:
run_timer_softirq+0x334/0x3d8
efi_header_end+0x114/0x234
irq_exit+0xd0/0xd8
__handle_domain_irq+0x60/0xb0
gic_handle_irq+0x58/0xa8
el1_irq+0xb8/0x180
arch_cpu_idle+0x10/0x18
do_idle+0x1d8/0x2b0
cpu_startup_entry+0x24/0x40
secondary_start_kernel+0x1b4/0x208
Code: f9000693 a9400660 f9000020 b4000040 (f9000401)
---[ end trace bb83ceeb4c482071 ]---
Kernel panic - not syncing: Fatal exception in interrupt
SMP: stopping secondary CPUs
SMP: failed to stop secondary CPUs 2-3
Kernel Offset: disabled
CPU features: 0x00002,2300aa30
Memory Limit: none
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
It's found that stmmac_xmit() and stmmac_resume() sometimes might
run concurrently, possibly resulting in a race condition between
mod_timer() and setup_timer(), being called by stmmac_xmit() and
stmmac_resume() respectively.
Since the resume() runs setup_timer() every time, it'd be safer to
have del_timer_sync() in the suspend() as the counterpart.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"There are a few changes to the core framework this time around, in
addition to the normal collection of driver updates to support new
SoCs, fix incorrect data, and convert various drivers to clk_hw based
APIs.
In the core, we allow clk_ops::init() to return an error code now so
that we can fail clk registration if the callback does something like
fail to allocate memory. We also add a new "terminate" clk_op so that
things done in clk_ops::init() can be undone, e.g. free memory. We
also spit out a warning now when critical clks fail to enable and we
support changing clk rates and enable/disable state through debugfs
when developers compile the kernel themselves.
On the driver front, we get support for what seems like a lot of
Qualcomm and NXP SoCs given that those vendors dominate the diffstat.
There are a couple new drivers for Xilinx and Amlogic SoCs too. The
updates are all small things like fixing the way glitch free muxes
switch parents, avoiding div-by-zero problems, or fixing data like
parent names. See the updates section below for more details.
Finally, the "basic" clk types have been converted to support
specifying parents with clk_hw pointers. This work includes an
overhaul of the fixed-rate clk type to be more modern by using clk_hw
APIs.
Core:
- Let clk_ops::init() return an error code
- Add a clk_ops::terminate() callback to undo clk_ops::init()
- Warn about critical clks that fail to enable or prepare
- Support dangerous debugfs actions on clks with dead code
New Drivers:
- Support for Xilinx Versal platform clks
- Display clk controller on qcom sc7180
- Video clk controller on qcom sc7180
- Graphics clk controller on qcom sc7180
- CPU PLLs for qcom msm8916
- Move qcom msm8974 gfx3d clk to RPM control
- Display port clk support on qcom sdm845 SoCs
- Global clk controller on qcom ipq6018
- Add a driver for BCLK of Freescale SAI cores
- Add cam, vpe and sgx clock support for TI dra7
- Add aess clock support for TI omap5
- Enable clks for CPUfreq on Allwinner A64 SoCs
- Add Amlogic meson8b DDR clock controller
- Add input clocks to Amlogic meson8b controllers
- Add SPIBSC (SPI FLASH) clock on Renesas RZ/A2
- i.MX8MP clk driver support
Updates:
- Convert gpio, fixed-factor, mux, gate, divider basic clks to hw
based APIs
- Detect more PRMCU variants in ux500 driver
- Adjust the composite clk type to new way of describing clk parents
- Fixes for clk controllers on qcom msm8998 SoCs
- Fix gmac main clock for TI dra7
- Move TI dra7-atl clock header to correct location
- Fix hidden node name dependency on TI clkctrl clocks
- Fix Amlogic meson8b mali clock update using the glitch free mux
- Fix Amlogic pll driver division by zero at init
- Prepare for split of Renesas R-Car H3 ES1.x and ES2.0+ config
symbols
- Switch more i.MX clk drivers to clk_hw based APIs
- Disable non-functional divider between pll4_audio_div and
pll4_post_div on imx6q
- Fix watchdog2 clock name typo in imx7ulp clock driver
- Set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M
SoCs
- Suppress bind attrs for i.MX8M clock driver
- Add a big comment in imx8qxp-lpcg driver to tell why
devm_platform_ioremap_resource() shouldn't be used for the driver
- A correction on i.MX8MN usb1_ctrl parent clock setting"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (140 commits)
dt/bindings: clk: fsl,plldig: Drop 'bindings' from schema id
clk: ls1028a: Fix warning on clamp() usage
clk: qoriq: add ls1088a hwaccel clocks support
clk: ls1028a: Add clock driver for Display output interface
dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings
clk: fsl-sai: new driver
dt-bindings: clock: document the fsl-sai driver
clk: composite: add _register_composite_pdata() variants
clk: qcom: rpmh: Sort OF match table
dt-bindings: fix warnings in validation of qcom,gcc.yaml
dt-binding: fix compilation error of the example in qcom,gcc.yaml
clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag
clk: zynqmp: Fix divider calculation
clk: zynqmp: Add support for get max divider
clk: zynqmp: Warn user if clock user are more than allowed
clk: zynqmp: Extend driver for versal
dt-bindings: clock: Add bindings for versal clock driver
clk: ti: clkctrl: Fix hidden dependency to node name
clk: ti: add clkctrl data dra7 sgx
clk: ti: omap5: Add missing AESS clock
...
|
|
Clang warns that ret is used uninitialzed.
And we found that actually the return type should be "int" instead
of "bool".
Fixes: 44bc17f7f5b3 ("rtw88: support wowlan feature for 8822c")
Link: https://github.com/ClangBuiltLinux/linux/issues/850
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Continue the wakeup flow only if no FW CPUs have an error
If we don't check for error in all FW CPUs the driver can think
based on one CPU that the FW is operational and try to access
and send commands.
Also, handle the error_id endianness correctly as le32
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
I changed the API for asking for a session protection but
I omitted the TDLS flows. Fix that now.
Note that for the TDLS flow, we need to block until the
session protection actually starts, so add this option
to iwl_mvm_schedule_session_protection.
This patch fixes a firmware assert in the TDLS flow since
the old TIME_EVENT_CMD is not supported anymore by newer
firwmare versions.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Fixes: fe959c7b2049 ("iwlwifi: mvm: use the new session protection command")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
