summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2020-01-27octeontx2-pf: Add packet transmission supportSunil Goutham
This patch adds the packet transmission support. For a given skb prepares send queue descriptors (SQEs) and pushes them to HW. Here driver doesn't maintain it's own SQ rings, SQEs are pushed to HW using a silicon specific operations called LMTST. From the instuction HW derives the transmit queue number and queues the SQE to that queue. These LMTST instructions are designed to avoid queue maintenance in SW and lockless behavior ie when multiple cores are trying to add SQEs to same queue then HW will takecare of serialization, no need for SW to hold locks. Also supports scatter/gather. Co-developed-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27octeontx2-pf: Receive packet handling supportSunil Goutham
Added receive packet handling (NAPI) support, error stats, RX_ALL capability config option to passon error pkts to stack upon user request. In subsequent patches these error stats will be added to ethttool. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27octeontx2-pf: Setup interrupts and NAPI handlerSunil Goutham
Completion queue (CQ) is the one with which HW notifies SW on a packet reception or transmission. Each of the RQ and SQ are mapped to a unique CQ and again both CQs are mapped to same interrupt ie the CINT. So that each core has one interrupt source in whose handler both Rx and Tx notifications are processed. Also - Registered a NAPI handler for the CINT. - Setup coalescing parameters. - IRQ affinity hints etc Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27octeontx2-pf: Initialize and config queuesSunil Goutham
This patch does the initialization of all queues ie the receive buffer pools, receive and transmit queues, completion or notification queues etc. Allocates all required resources (eg transmit schedulers, receive buffers etc) and configures them for proper functioning of queues. Also sets up receive queue's RED dropping levels. Co-developed-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27octeontx2-pf: Attach NIX and NPA block LFsSunil Goutham
For a PF to function as a NIC, NPA (for Rx buffers, Tx descriptors etc) and NIX (for rcv, send and completion queues) are the minimum resources needed. So request admin function (AF) to attach one each of NIX and NPA block LFs (local functions). Only AF can configure a LF's contexts, so request AF to allocate memory for NPA aura/pool and NIX RQ/SQ/CQ HW contexts. Upon receiving response, save some of the HW constants like number of pointers per stack page, size of send queue buffer (SQBs, where SQEs are queued by HW) e.t.c which are later used to initialize queues. A HW context here is like a state machine maintained for a descriptor queue. eg size, head/tail pointers, irq etc etc. HW maintains this in memory. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27octeontx2-pf: Mailbox communication with AFSunil Goutham
In the resource virtualization unit (RVU) each of the PF and AF (admin function) share a 64KB of reserved memory region for communication. This patch initializes PF <=> AF mailbox IRQs, registers handlers for processing these communication messages. Also adds support to process these messages in both directions ie responses to PF initiated DOWN (PF => AF) messages and AF initiated UP messages (AF => PF). Mbox communication APIs and message formats are defined in AF driver (drivers/net/ethernet/marvell/octeontx2/af), mbox.h from AF driver is included here to avoid duplication. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Aleksey Makarov <amakarov@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27octeontx2-pf: Add Marvell OcteonTX2 NIC driverSunil Goutham
This patch adds template for the Marvell's OcteonTX2 network controller's physical function driver. Just the probe, PCI specific initialization and netdev registration. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-01-27 The following pull-request contains BPF updates for your *net-next* tree. We've added 20 non-merge commits during the last 5 day(s) which contain a total of 24 files changed, 433 insertions(+), 104 deletions(-). The main changes are: 1) Make BPF trampolines and dispatcher aware for the stack unwinder, from Jiri Olsa. 2) Improve handling of failed CO-RE relocations in libbpf, from Andrii Nakryiko. 3) Several fixes to BPF sockmap and reuseport selftests, from Lorenz Bauer. 4) Various cleanups in BPF devmap's XDP flush code, from John Fastabend. 5) Fix BPF flow dissector when used with port ranges, from Yoshiki Komachi. 6) Fix bpffs' map_seq_next callback to always inc position index, from Vasily Averin. 7) Allow overriding LLVM tooling for runqslower utility, from Andrey Ignatov. 8) Silence false-positive lockdep splats in devmap hash lookup, from Amol Grover. 9) Fix fentry/fexit selftests to initialize a variable before use, from John Sperbeck. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27sfc: move mcdi filtering codeAlex Maftei (amaftei)
Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27sfc: create header for mcdi filtering codeAlex Maftei (amaftei)
Moved structs, enums, and added function prototypes. The affected functions are no longer static. Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27sfc: rename mcdi filtering functions/structsAlex Maftei (amaftei)
Minor style fixes included due to name lengths changing. Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27bnxt_en: Add support for devlink info commandVasundhara Volam
Display the following information via devlink info command: - Driver name - Board id - Broad revision - Board Serial number - Board FW version - FW parameter set version - FW App version - FW management version - FW RoCE version Standard output example: $ devlink dev info pci/0000:3b:00.0 pci/0000:3b:00.0: driver bnxt_en serial_number 00-10-18-FF-FE-AD-05-00 versions: fixed: asic.id D802 asic.rev 1 running: fw 216.1.124.0 fw.psid 0.0.0 fw.app 216.1.122.0 fw.mgmt 864.0.32.0 fw.roce 216.1.15.0 [ This version has incorporated changes suggested by Jakub Kicinski to use generic devlink version tags. ] v2: Use fw.psid Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27bnxt_en: Rename switch_id to dsnVasundhara Volam
Instead of switch_id, renaming it to dsn will be more meaningful so that it can be used to display device serial number in follow up patch via devlink_info command. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27bnxt_en: Add support to update progress of flash updateVasundhara Volam
This patch adds status notification to devlink flash update while flashing is in progress. $ devlink dev flash pci/0000:05:00.0 file 103.pkg Preparing to flash Flashing done Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27bnxt_en: Move devlink_register before registering netdevVasundhara Volam
Latest kernels get the phys_port_name via devlink, if ndo_get_phys_port_name is not defined. To provide the phys_port_name correctly, register devlink before registering netdev. Also call devlink_port_type_eth_set() after registering netdev as devlink port updates the netdev structure and notifies user. Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27bnxt_en: Register devlink irrespective of firmware spec versionVasundhara Volam
This will allow to register for devlink port and use port features. Also register params only if firmware spec version is at least 0x10600 which will support reading/setting numbered variables in NVRAM. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27bnxt_en: Refactor bnxt_dl_register()Vasundhara Volam
Define bnxt_dl_params_register() and bnxt_dl_params_unregister() functions and move params register/unregister code to these newly defined functions. This patch is in preparation to register devlink irrespective of firmware spec. version in the next patch. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27bnxt_en: Disable workaround for lost interrupts on 575XX B0 and newer chips.Michael Chan
The hardware bug has been fixed on B0 and newer chips, so disable the workaround on these chips. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27bnxt_en: Periodically check and remove aged-out ntuple filtersPavan Chebbi
Currently the only time we check and remove expired filters is when we are inserting new filters. Improving the aRFS expiry handling by adding code to do the above work periodically. Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27bnxt_en: Do not accept fragments for aRFS flow steering.Michael Chan
In bnxt_rx_flow_steer(), if the dissected packet is a fragment, do not proceed to create the ntuple filter and return error instead. Otherwise we would create a filter with 0 source and destination ports because the dissected ports would not be available for fragments. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27bnxt_en: Support UDP RSS hashing on 575XX chips.Michael Chan
575XX (P5) chips have the same UDP RSS hashing capability as P4 chips, so we can enable it on P5 chips. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27bnxt_en: Remove the setting of dev_port.Michael Chan
The dev_port is meant to distinguish the network ports belonging to the same PCI function. Our devices only have one network port associated with each PCI function and so we should not set it for correctness. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27bnxt_en: Improve bnxt_probe_phy().Michael Chan
If the 2nd parameter fw_dflt is not set, we are calling bnxt_probe_phy() after the firmware has reset. There is no need to query the current PHY settings from firmware as these settings may be different from the ethtool settings that the driver will re-establish later. So return earlier in bnxt_probe_phy() to save one firmware call. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27bnxt_en: Improve link up detection.Michael Chan
In bnxt_update_phy_setting(), ethtool_get_link_ksettings() and bnxt_disable_an_for_lpbk(), we inconsistently use netif_carrier_ok() to determine link. Instead, we should use bp->link_info.link_up which has the true link state. The netif_carrier state may be off during self-test and while the device is being reset and may not always reflect the true link state. By always using bp->link_info.link_up, the code is now more consistent and more correct. Some unnecessary link toggles are now prevented with this patch. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27Merge tag 'wireless-drivers-next-2020-01-26' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.6 Second set of patches for v5.6. Nothing special standing out, smaller new features and fixes allover. Major changes: ar5523 * add support for SMCWUSBT-G2 USB device iwlwifi * support new versions of the FTM FW APIs * support new version of the beacon template FW API * print some extra information when the driver is loaded rtw88 * support wowlan feature for 8822c * add support for WIPHY_WOWLAN_NET_DETECT brcmfmac * add initial support for monitor mode qtnfmac * add module parameter to enable DFS offloading in firmware * add support for STA HE rates * add support for TWT responder and spatial reuse ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27drivers: net: xgene: Fix the order of the arguments of 'alloc_etherdev_mqs()'Christophe JAILLET
'alloc_etherdev_mqs()' expects first 'tx', then 'rx'. The semantic here looks reversed. Reorder the arguments passed to 'alloc_etherdev_mqs()' in order to keep the correct semantic. In fact, this is a no-op because both XGENE_NUM_[RT]X_RING are 8. Fixes: 107dec2749fe ("drivers: net: xgene: Add support for multiple queues") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27bpf, xdp: Remove no longer required rcu_read_{un}lock()John Fastabend
Now that we depend on rcu_call() and synchronize_rcu() to also wait for preempt_disabled region to complete the rcu read critical section in __dev_map_flush() is no longer required. Except in a few special cases in drivers that need it for other reasons. These originally ensured the map reference was safe while a map was also being free'd. And additionally that bpf program updates via ndo_bpf did not happen while flush updates were in flight. But flush by new rules can only be called from preempt-disabled NAPI context. The synchronize_rcu from the map free path and the rcu_call from the delete path will ensure the reference there is safe. So lets remove the rcu_read_lock and rcu_read_unlock pair to avoid any confusion around how this is being protected. If the rcu_read_lock was required it would mean errors in the above logic and the original patch would also be wrong. Now that we have done above we put the rcu_read_lock in the driver code where it is needed in a driver dependent way. I think this helps readability of the code so we know where and why we are taking read locks. Most drivers will not need rcu_read_locks here and further XDP drivers already have rcu_read_locks in their code paths for reading xdp programs on RX side so this makes it symmetric where we don't have half of rcu critical sections define in driver and the other half in devmap. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/1580084042-11598-4-git-send-email-john.fastabend@gmail.com
2020-01-27bpf, xdp: virtio_net use access ptr macro for xdp enable checkJohn Fastabend
virtio_net currently relies on rcu critical section to access the xdp program in its xdp_xmit handler. However, the pointer to the xdp program is only used to do a NULL pointer comparison to determine if xdp is enabled or not. Use rcu_access_pointer() instead of rcu_dereference() to reflect this. Then later when we drop rcu_read critical section virtio_net will not need in special handling. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/1580084042-11598-3-git-send-email-john.fastabend@gmail.com
2020-01-27r8169: don't set min_mtu/max_mtu if not neededHeiner Kallweit
Defaults for min_mtu and max_mtu are set by ether_setup(), which is called from devm_alloc_etherdev(). Let rtl_jumbo_max() only return a positive value if actually jumbo packets are supported. This also allows to remove constant Jumbo_1K which is a little misleading anyway. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27mlxsw: minimal: Fix an error handling path in 'mlxsw_m_port_create()'Christophe JAILLET
An 'alloc_etherdev()' called is not ballanced by a corresponding 'free_netdev()' call in one error handling path. Slighly reorder the error handling code to catch the missed case. Fixes: c100e47caa8e ("mlxsw: minimal: Add ethtool support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27net: socionext: fix xdp_result initialization in netsec_process_rxLorenzo Bianconi
Fix xdp_result initialization in netsec_process_rx in order to not increase rx counters if there is no bpf program attached to the xdp hook and napi_gro_receive returns GRO_DROP Fixes: ba2b232108d3c ("net: netsec: add XDP support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27net: socionext: fix possible user-after-free in netsec_process_rxLorenzo Bianconi
Fix possible use-after-free in in netsec_process_rx that can occurs if the first packet is sent to the normal networking stack and the following one is dropped by the bpf program attached to the xdp hook. Fix the issue defining the skb pointer in the 'budget' loop Fixes: ba2b232108d3c ("net: netsec: add XDP support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27mlx5: Use dev_net netdevice notifier registrationsJiri Pirko
Register the dev_net notifier and allow the per-net notifier to follow the device into different namespace. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27mvneta driver disallow XDP program on hardware buffer managementSven Auhagen
Recently XDP Support was added to the mvneta driver for software buffer management only. It is still possible to attach an XDP program if hardware buffer management is used. It is not doing anything at that point. The patch disallows attaching XDP programs to mvneta if hardware buffer management is used. I am sorry about that. It is my first submission and I am having some troubles with the format of my emails. v4 -> v5: - Remove extra tabs v3 -> v4: - Please ignore v3 I accidentally submitted my other patch with git-send-mail and v4 is correct v2 -> v3: - My mailserver corrupted the patch resubmission with git-send-email v1 -> v2: - Fixing the patches indentation Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-26Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v5.6. Major changes: ar5523 * add support for SMCWUSBT-G2 USB device
2020-01-26iwlegacy: ensure loop counter addr does not wrap and cause an infinite loopColin Ian King
The loop counter addr is a u16 where as the upper limit of the loop is an int. In the unlikely event that the il->cfg->eeprom_size is greater than 64K then we end up with an infinite loop since addr will wrap around an never reach upper loop limit. Fix this by making addr an int. Addresses-Coverity: ("Infinite loop") Fixes: be663ab67077 ("iwlwifi: split the drivers for agn and legacy devices 3945/4965") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtlwifi: btcoex: fix spelling mistake "initilized" -> "initialized"Colin Ian King
There is a spelling mistake in one of the fields in the btc_coexist struct, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtlwifi: rtl8723ae: remove unused variablesYueHaibing
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/dm.c:16:18: warning: ofdmswing_table defined but not used [-Wunused-const-variable=] drivers/net/wireless/realtek/rtlwifi/rtl8723ae/dm.c:56:17: warning: cckswing_table_ch1ch13 defined but not used [-Wunused-const-variable=] drivers/net/wireless/realtek/rtlwifi/rtl8723ae/dm.c:92:17: warning: cckswing_table_ch14 defined but not used [-Wunused-const-variable=] These variable is never used, so remove them. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtlwifi: rtl8192ee: remove unused variablesYueHaibing
drivers/net/wireless/realtek/rtlwifi/rtl8192ee/dm.c:15:18: warning: ofdmswing_table defined but not used [-Wunused-const-variable=] drivers/net/wireless/realtek/rtlwifi/rtl8192ee/dm.c:61:17: warning: cckswing_table_ch1ch13 defined but not used [-Wunused-const-variable=] drivers/net/wireless/realtek/rtlwifi/rtl8192ee/dm.c:97:17: warning: cckswing_table_ch14 defined but not used [-Wunused-const-variable=] These variable is never used, so remove them. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtlwifi: rtl8821ae: remove unused variablesYueHaibing
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:142:17: warning: cckswing_table_ch1ch13 defined but not used [-Wunused-const-variable=] drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:178:17: warning: cckswing_table_ch14 defined but not used [-Wunused-const-variable=] drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:96:18: warning: ofdmswing_table defined but not used [-Wunused-const-variable=] These variable is never used, so remove them. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtlwifi: rtl8188ee: remove redundant assignment to variable condColin Ian King
Variable cond is being assigned with a value that is never read, it is assigned a new value later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26qtnfmac: add support for TWT responder and spatial reuseMikhail Karpenko
Add support for 11ax features: TWT responder and spatial reuse. Add separate structure for spatial reuse parameters and pass this structure to firmware along with other parameters in start_ap command. Pass TWT responder value to firmware. Bump qlink protocol version. Signed-off-by: Mikhail Karpenko <mkarpenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26qtnfmac: add support for STA HE ratesSergey Matyukevich
Add HE rates into STA info. Report HE Rx/Tx MCS if STA supports them. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26qtnfmac: control qtnfmac wireless interfaces bridgingSergey Matyukevich
Bridging qtnfmac interfaces is possible only if the following two conditions are fulfilled: - firmware advertises proper support with QLINK_HW_CAPAB_HW_BRIDGE - kernel is built with CONFIG_NET_SWITCHDEV support Otherwise adding qtnfmac wireless interfaces into the same bridge should not be allowed since packets flooded by kernel may break internal forwarding rules between interfaces. This patch disables adding qtnfmac wireless interfaces into the same bridge if no support is provided either by card or by kernel. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26qtnfmac: add module param to configure DFS offloadSergey Matyukevich
Firmware may support DFS offload. However the final decision on whether to use it or not should be up to the user. So even if firmware supports DFS offload, it should be enabled only if user explicitly requests it. For this purpose introduce kernel param dfs_offload which is disabled by default. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26qtnfmac: cleanup slave_radar access functionSergey Matyukevich
Currently this parameter is global, it is not specific to mac. So this function does not need any input parameters. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26brcmfmac: Remove always false 'idx < 0' statementyuehaibing
idx is declared as u32, it will never less than 0. Signed-off-by: yuehaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: use shorter delay time to poll PS stateYan-Hsuan Chuang
When TX packet arrives, driver should leave deep PS state to make sure the DMA is working. After requested to leave deep PS state, driver needs to poll the PS state to check if the mode has been changed successfully. The driver used to check the state of the hardware every 20 msecs, which means upon the first failure of state check, the CPU is delayed 20 msecs for next check. This is harmful for some time-sensitive applications such as media players. So, use shorter delay time each check from 20 msecs to 100 usecs. The state should be changed in several tries. But we still need to reserve ~15 msecs in total in case of the state just took too long to be changed successfully. If the states of driver and the hardware is not synchronized, the power state could be locked forever, which mean we could never enter/leave the PS state. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: fix potential NULL skb access in TX ISRYan-Hsuan Chuang
Sometimes the TX queue may be empty and we could possible dequeue a NULL pointer, crash the kernel. If the skb is NULL then there is nothing to do, just leave the ISR. And the TX queue should not be empty here, so print an error to see if there is anything wrong for DMA ring. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26brcmfmac: add initial support for monitor modeRafał Miłecki
Report monitor interface availability using cfg80211 and support it in the add_virtual_intf() and del_virtual_intf() callbacks. This new feature is conditional and depends on firmware flagging monitor packets. Receiving monitor frames is already handled by the brcmf_netif_mon_rx(). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-10 16:39:33 +0000