summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2020-05-30net: dsa: sja1105: fix port mirroring for P/Q/R/SVladimir Oltean
The dynamic configuration interface for the General Params and the L2 Lookup Params tables was copy-pasted between E/T devices and P/Q/R/S devices. Nonetheless, these interfaces are bitwise different. The driver is using dynamic reconfiguration of the General Parameters table for the port mirroring feature, which was therefore broken on P/Q/R/S. Note that this patch can't be backported easily very far to stable trees (since it conflicts with some other development done since the introduction of the driver). So the Fixes: tag is purely informational. Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30net: dsa: sja1105: suppress -Wmissing-prototypes in sja1105_static_config.cVladimir Oltean
Newer compilers complain with W=1 builds that there are non-static functions defined in sja1105_static_config.c that don't have a prototype, because their prototype is defined in sja1105.h which this translation unit does not include. I don't entirely understand what is the point of these warnings, since in principle there's nothing wrong with that. But let's move the prototypes to a header file that _is_ included by sja1105_static_config.c, since that will make these warnings go away. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30Merge tag 'mlx5-cleanup-2020-05-29' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-cleanup-2020-05-29 Accumulated cleanup patches and sparse warning fixes for mlx5 driver. 1) sync with mlx5-next branch 2) Eli Cohen declares mpls_entry_encode() helper in mpls.h as suggested by Jakub Kicinski and David Ahern, and use it in mlx5 3) Jesper Fixes xdp data_meta setup in mlx5 4) Many sparse and build warnings cleanup ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30net: hns3: remove some unused codes in hns3_nic_set_features()Huazhong Tan
NETIF_F_HW_VLAN_CTAG_FILTER is not set in netdev->hw_feature for the HNS3 driver, so the handler of NETIF_F_HW_VLAN_CTAG_FILTER in hns3_nic_set_features() won't be called, remove it. Reported-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30net: hns3: fix two coding style issues in hclgevf_main.cHuazhong Tan
Remove a redundant blank line in hclgevf_cmd_set_promisc_mode(), and fix a reverse xmas tree coding style issue in hclgevf_set_rss_tc_mode(). Reported-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30net: hns3: fix an incorrect comment for num_tqps in struct hclgevf_devHuazhong Tan
struct hclgevf_dev stands for VF device, its field num_tqps indicates the number of VF's task queue pairs, so the comment is incorrect, replace 'PF' with 'VF'. Reported-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30net: hns3: remove two unused macros in hclgevf_cmd.cHuazhong Tan
Macro hclgevf_ring_to_dma_dir and hclgevf_is_csq defined in hclgevf_cmd.c, but not used, so remove them. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30net: hns3: remove an unused macro hclge_is_csqHuazhong Tan
Macro hclge_is_csq defined in hcgle_cmd.c has not been used, so remove it. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30net: hns3: fix a print format issue in hclge_mac_mdio_config()Huazhong Tan
Use %d to print int variable 'ret' in hclge_mac_mdio_config(). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v5.8. Major changes: ath9k * allow receive of broadcast Action frames ath9k_htc * allow receive of broadcast Action frames
2020-05-30ath11k: clear DCM max constellation tx valueMuna Sinada
According to 11ax spec. draft 4.0. DCM Max Constellation Tx data field should be set to "Reserved" for an AP, therefore bit is cleared. Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1590707417-29672-1-git-send-email-msinada@codeaurora.org
2020-05-30ath11k: reset trigger frame MAC padding durationMuna Sinada
The value was 3 and it's reserved value. Corrected to maintain fw defaults. Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1590706483-27609-1-git-send-email-msinada@codeaurora.org
2020-05-30ath10k: Remove ath10k_qmi_register_service_notifier() declarationDouglas Anderson
The ath10k/qmi.h header file contains a declaration for the function ath10k_qmi_register_service_notifier(). This function doesn't exist. Remove the declaration. This patch is a no-op and was just found by code inspection. Fixes: ba94c753ccb4 ("ath10k: add QMI message handshake for wcn3990 client") Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200528122105.1.I31937dce728b441fd72cbe23447bc4710fd56ddb@changeid
2020-05-30ath9k_htc: Set RX filter based to allow broadcast Action frame RXJouni Malinen
Advertise support for multicast frame registration and update the RX filter based on the recently added FIF_MCAST_ACTION to allow broadcast Action frames to be received. This is needed for Device Provisioning Protocol (DPP) use cases that use broadcast Public Action frames. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200426084733.7889-2-jouni@codeaurora.org
2020-05-30ath9k: Set RX filter based to allow broadcast Action frame RXJouni Malinen
Advertise support for multicast frame registration and update the RX filter based on the recently added FIF_MCAST_ACTION to allow broadcast Action frames to be received. This is needed for Device Provisioning Protocol (DPP) use cases that use broadcast Public Action frames. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200426084733.7889-1-jouni@codeaurora.org
2020-05-29net/mlx5e: Make mlx5e_dcbnl_ops staticSaeed Mahameed
Fix sparse warning: drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c:988:29: error: symbol 'mlx5e_dcbnl_ops' was not declared. Should it be static? Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29net/mlx5e: en_tc: Fix cast to restricted __be32 warningSaeed Mahameed
Fixes sparse warnings: warning: cast to restricted __be32 warning: restricted __be32 degrades to integer Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com>
2020-05-29net/mlx5e: en_tc: Fix incorrect type in initializer warningsSaeed Mahameed
Fix some trivial warnings of the type: warning: incorrect type in initializer (different base types) Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com>
2020-05-29net/mlx5: Accel: fpga tls fix cast to __be64 and incorrect argument typesSaeed Mahameed
tls handle and rcd_sn are actually big endian and not in host format. Fix that. Fix the following sparse warnings: drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls.c:177:21: warning: cast to restricted __be64 drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls.c:178:52: warning: incorrect type in argument 2 (different base types) expected unsigned int [usertype] handle got restricted __be32 [usertype] handle Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29net/mlx5: cmd: Fix memset with byte count warningSaeed Mahameed
Fix sparse warning: drivers/net/ethernet/mellanox/mlx5/core/cmd.c:1949:15: warning: memset with byte count of 271720 mlx5_cmd_stats array is too big to be held inline in mlx5_cmd. Allocate it separately. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29net/mlx5: DR: Fix incorrect type in return expressionSaeed Mahameed
dr_ste_crc32_calc() calculates crc32 and should return it in HW format. It is being used to calculate a u32 index, hence we force the return value of u32 to avoid the sparse warning: drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.c:115:16: warning: incorrect type in return expression (different base types) expected unsigned int got restricted __be32 [usertype] Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com>
2020-05-29net/mlx5: DR: Fix cast to restricted __be32Saeed Mahameed
raw_ip actual type is __be32 and not u32. Fix that and get rid of the warning. drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.c:906:31: warning: cast to restricted __be32 Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com>
2020-05-29net/mlx5: DR: Fix incorrect type in argumentSaeed Mahameed
HW spec objects should receive a void ptr to work on, the MLX5_SET/GET macro will know how to handle it. No need to provide explicit or wrong pointer type in this case. warning: incorrect type in argument 1 (different base types) expected unsigned long long const [usertype] *sw_action got restricted __be64 [usertype] *[assigned] sw_action Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com>
2020-05-29net/mlx5e: Use generic API to build MPLS labelEli Cohen
Make use of generic API mpls_entry_encode() to build mpls label and get rid of local function. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29net/mlx5: reduce stack usage in qp_read_fieldArnd Bergmann
Moving the mlx5_ifc_query_qp_out_bits structure on the stack was a bit excessive and now causes the compiler to complain on 32-bit architectures: drivers/net/ethernet/mellanox/mlx5/core/debugfs.c: In function 'qp_read_field': drivers/net/ethernet/mellanox/mlx5/core/debugfs.c:274:1: error: the frame size of 1104 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Revert the previous patch partially to use dynamically allocation as the code did before. Unfortunately there is no good error handling in case the allocation fails. Fixes: 57a6c5e992f5 ("net/mlx5: Replace hand written QP context struct with automatic getters") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29net/mlx5e: Don't use err uninitialized in mlx5e_attach_decapNathan Chancellor
Clang warns: drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:3712:6: warning: variable 'err' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] if (IS_ERR(d->pkt_reformat)) { ^~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:3718:6: note: uninitialized use occurs here if (err) ^~~ drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:3712:2: note: remove the 'if' if its condition is always true if (IS_ERR(d->pkt_reformat)) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:3670:9: note: initialize the variable 'err' to silence this warning int err; ^ = 0 1 warning generated. It is not wrong, err is only ever initialized in if statements but this one is not in one. Initialize err to 0 to fix this. Fixes: 14e6b038afa0 ("net/mlx5e: Add support for hw decapsulation of MPLS over UDP") Link: https://github.com/ClangBuiltLinux/linux/issues/1037 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29net/mlx5: Kconfig: Fix spelling typoSaeed Mahameed
"mdoe"->"mode" Fixes: d956873f908c ("net/mlx5e: Introduce kconfig var for TC support") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
2020-05-29mlx5: fix xdp data_meta setup in mlx5e_fill_xdp_buffJesper Dangaard Brouer
The helper function xdp_set_data_meta_invalid() must be called after setting xdp->data as it depends on it. The bug was introduced in the cited patch below, and cause the kernel to crash when using BPF helper bpf_xdp_adjust_head() on mlx5 driver. Fixes: 39d6443c8daf ("mlx5, xsk: Migrate to new MEM_TYPE_XSK_BUFF_POOL") Reported-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29drivers/net/ibmvnic: Update VNIC protocol version reportingThomas Falcon
VNIC protocol version is reported in big-endian format, but it is not byteswapped before logging. Fix that, and remove version comparison as only one protocol version exists at this time. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29nfp: flower: fix incorrect flag assignmentLouis Peens
A previous refactoring missed some locations the flags were renamed but not moved from the previous flower_ext_feats to the new flower_en_feats variable. This lead to the FLOW_MERGE and LAG features not being enabled. Fixes: e09303d3c4d9 ("nfp: flower: renaming of feature bits") Signed-off-by: Louis Peens <louis.peens@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29net: ethernet: dwmac: add ethernet glue logic for NXP imx8 chipFugang Duan
NXP imx8 family like imx8mp/imx8dxl chips support Synopsys MAC 5.10a IP. This patch adds settings for NXP imx8 glue layer: - clocks - dwmac address width - phy interface mode selection - adjust rgmii txclk rate v2: - adjust code sequences in order to have reverse christmas tree local variable ordering. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29stmmac: platform: add "snps, dwmac-5.10a" IP compatible stringFugang Duan
Add "snps,dwmac-5.10a" compatible string for 5.10a version that can avoid to define some plat data in glue layer. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29net: dsa: sja1105: avoid invalid state in sja1105_vlan_filteringVladimir Oltean
Be there 2 switches spi/spi2.0 and spi/spi2.1 in a cross-chip setup, both under the same VLAN-filtering bridge, both in the SJA1105_VLAN_BEST_EFFORT state. If we try to change the VLAN state of one of the switches (to SJA1105_VLAN_FILTERING_FULL) we get the following error: devlink dev param set spi/spi2.1 name best_effort_vlan_filtering value false cmode runtime [ 38.325683] sja1105 spi2.1: Not allowed to overcommit frame memory. L2 memory partitions and VL memory partitions share the same space. The sum of all 16 memory partitions is not allowed to be larger than 929 128-byte blocks (or 910 with retagging). Please adjust l2-forwarding-parameters-table.part_spc and/or vl-forwarding-parameters-table.partspc. [ 38.356803] sja1105 spi2.1: Invalid config, cannot upload This is because the spi/spi2.1 switch doesn't support tagging anymore in the SJA1105_VLAN_FILTERING_FULL state, so it doesn't need to have any retagging rules defined. Great, so it can use more frame memory (retagging consumes extra memory). But the built-in low-level static config checker from the sja1105 driver says "not so fast, you've increased the frame memory to non-retagging values, but you still kept the retagging rules in the static config". So we need to rebuild the VLAN table immediately before re-uploading the static config, operation which will take care, based on the new VLAN state, of removing the retagging rules. Fixes: 3f01c91aab92 ("net: dsa: sja1105: implement VLAN retagging for dsa_8021q sub-VLANs") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29Merge branch 'mlx5-next' of ↵Saeed Mahameed
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux net/mlx5: Add ability to read and write ECE options net/mlx5: Add support for RDMA TX FT headers modifying net/mlx5: Move iseg access helper routines close to mlx5_core driver net/mlx5: Cleanup mlx5_ifc_fte_match_set_misc2_bits net/mlx5: Add support in forward to namespace {IB/net}/mlx5: Simplify don't trap code net/mlx5: Replace zero-length array with flexible-array Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta()Pablo Neira Ayuso
The drivers reports EINVAL to userspace through netlink on invalid meta match. This is confusing since EINVAL is usually reserved for malformed netlink messages. Replace it by more meaningful codes. Fixes: 6d65bc64e232 ("net/mlx5e: Add mlx5e_flower_parse_meta support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29net/mlx5e: Fix MLX5_TC_CT dependenciesVlad Buslov
Change MLX5_TC_CT config dependencies to include MLX5_ESWITCH instead of MLX5_CORE_EN && NET_SWITCHDEV, which are already required by MLX5_ESWITCH. Without this change mlx5 fails to compile if user disables MLX5_ESWITCH without also manually disabling MLX5_TC_CT. Fixes: 4c3844d9e97e ("net/mlx5e: CT: Introduce connection tracking") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29net/mlx5e: Properly set default values when disabling adaptive moderationTal Gilboa
Add a call to mlx5e_reset_rx/tx_moderation() when enabling/disabling adaptive moderation, in order to select the proper default values. In order to do so, we separate the logic of selecting the moderation values and setting moderion mode (CQE/EQE based). Fixes: 0088cbbc4b66 ("net/mlx5e: Enable CQE based moderation on TX CQ") Fixes: 9908aa292971 ("net/mlx5e: CQE based moderation") Signed-off-by: Tal Gilboa <talgi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29net/mlx5e: Fix arch depending casting issue in FECAya Levin
Change type of active_fec to u32 to match the type expected by mlx5e_get_fec_mode. Copy active_fec and configured_fec values to unsigned long before preforming bitwise manipulations. Take the same approach when configuring FEC over 50G link modes: copy the policy into an unsigned long and only than preform bitwise operations. Fixes: 2132b71f78d2 ("net/mlx5e: Advertise globaly supported FEC modes") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29net/mlx5e: Remove warning "devices are not on same switch HW"Maor Dickman
On tunnel decap rule insertion, the indirect mechanism will attempt to offload the rule on all uplink representors which will trigger the "devices are not on same switch HW, can't offload forwarding" message for the uplink which isn't on the same switch HW as the VF representor. The above flow is valid and shouldn't cause warning message, fix by removing the warning and only report this flow using extack. Fixes: 321348475d54 ("net/mlx5e: Fix allowed tc redirect merged eswitch offload cases") Signed-off-by: Maor Dickman <maord@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29net/mlx5e: Fix stats update for matchall classifierRoi Dayan
It's bytes, packets, lastused. Fixes: fcb64c0f5640 ("net/mlx5: E-Switch, add ingress rate support") Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29net/mlx5: Fix crash upon suspend/resumeMark Bloch
Currently a Linux system with the mlx5 NIC always crashes upon hibernation - suspend/resume. Add basic callbacks so the NIC could be suspended and resumed. Fixes: 9603b61de1ee ("mlx5: Move pci device handling from mlx5_ib to mlx5_core") Tested-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29net: phy: marvell: unlock after phy_select_page() failureDan Carpenter
We need to call phy_restore_page() even if phy_select_page() fails. Otherwise we are holding the phy_lock_mdio_bus() lock. This requirement is documented at the start of the phy_select_page() function. Fixes: a618e86da91d ("net : phy: marvell: Speedup TDR data retrieval by only changing page once") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29net: phy: mscc: fix PHYs using the vsc8574_probeAntoine Tenart
PHYs using the vsc8574_probe fail to be initialized and their config_init return -EIO leading to errors like: "could not attach PHY: -5". This is because when the conversion of the MSCC PHY driver to use the shared PHY package helpers was done, the base address retrieval and the base PHY read and write helpers in the driver were modified. In particular, the base address retrieval logic was moved from the config_init to the probe. But the vsc8574_probe was forgotten. This patch fixes it. Fixes: deb04e9c0ff2 ("net: phy: mscc: use phy_package_shared") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Michael Walle <michael@walle.cc> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29net: ethernet: mtk-star-emac: remove unused variableBartosz Golaszewski
The desc pointer is set but not used. Remove it. Reported-by: kbuild test robot <lkp@intel.com> Fixes: 8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver") Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29Merge branch '10GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2020-05-28 This series contains updates to e1000, e1000e, igc, igb, ixgbe and i40e. Takashi Iwai, from SUSE, replaces some uses of snprintf() with scnprintf() since the succeeding calls may go beyond the given buffer limit in i40e. Jesper Dangaard Brouer fixes up code comments in i40e_xsk.c Xie XiuQi, from Huawei, fixes a signed-integer-overflow warning ixgbe driver. Jason Yan, from Huawei, converts '==' expression to bool to resolve warnings, also fixed a warning for assigning 0/1 to a bool variable in the ixgbe driver. Converts functions that always return 0 to void in the igb and i40e drivers. YueHaibing, from Hauwei, cleans up dead code in ixgbe driver. Sasha cleans up more dead code which is not used in the igc driver. Added receive error counter to reflect the total number of non-filtered packets received with errors. Fixed a register define name to properly reflect the register address being used. Andre updates the igc driver to reject NFC rules that have multiple matches, which is not supported in i225 devices. Updates the total number of NFC rules supported and added a code comment to explain what is supported. Punit Agrawal, from Toshiba, relaxes the condition to trigger a reset for ME, which was leading to inconsistency between the state of the hardware as expected by the driver in e1000e. Hari, from the Linux community, cleaned up a code comment in the e1000 driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29vmxnet3: use correct hdr reference when packet is encapsulatedRonak Doshi
'Commit dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload support")' added support for encapsulation offload. However, while preparing inner tso packet, it uses reference to outer ip headers. This patch fixes this issue by using correct reference for inner headers. Fixes: dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload support") Signed-off-by: Ronak Doshi <doshir@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29Merge tag 'iwlwifi-next-for-kalle-2020-05-29' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Third set of iwlwifi patches intended for v5.8 * Update range request API; * Add ACPI DSM support; * Support enabling 5.2GHz bands in Indonesia via ACPI; * Bump FW API version to 56; * TX queues refactoring started; * Fix one memory leak; * Some other small fixes and clean-ups; # gpg: Signature made Fri 29 May 2020 10:38:28 AM EEST using RSA key ID 1A3CC5FA # gpg: Good signature from "Luciano Roth Coelho (Luca) <luca@coelho.fi>" # gpg: aka "Luciano Roth Coelho (Intel) <luciano.coelho@intel.com>"
2020-05-29Merge tag 'mt76-for-kvalo-2020-05-28' of https://github.com/nbd168/wirelessKalle Valo
mt76 patches for 5.8 * fixes for sparse warnings * DBDC fixes * mt7663 remain-on-channel support * mt7915 spatial reuse support * mt7915 radiotap fix * station wcid allocation fix * mt7663 powersave fix * mt7663 scan fix * mt7611n support * cleanup # gpg: Signature made Thu 28 May 2020 07:02:21 PM EEST using DSA key ID 02A76EF5 # gpg: Good signature from "Felix Fietkau <nbd@nbd.name>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 75D1 1A7D 91A7 710F 4900 42EF D77D 141D 02A7 6EF5
2020-05-29mwifiex: Add support for NL80211_ATTR_MAX_AP_ASSOC_STAPali Rohár
SD8997 firmware sends TLV_TYPE_MAX_CONN with struct hw_spec_max_conn to inform kernel about maximum number of p2p connections and stations in AP mode. During initialization of SD8997 wifi chip kernel prints warning: mwifiex_sdio mmc0:0001:1: Unknown GET_HW_SPEC TLV type: 0x217 This patch adds support for parsing TLV_TYPE_MAX_CONN (0x217) and sets appropriate cfg80211 member 'max_ap_assoc_sta' from retrieved structure. It allows userspace to retrieve NL80211_ATTR_MAX_AP_ASSOC_STA attribute. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200521123559.29028-1-pali@kernel.org
2020-05-29mwifiex: Parse all API_VER_ID propertiesPali Rohár
During initialization of SD8997 wifi chip kernel prints warnings: mwifiex_sdio mmc0:0001:1: Unknown api_id: 3 mwifiex_sdio mmc0:0001:1: Unknown api_id: 4 This patch adds support for parsing all api ids provided by SD8997 firmware. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200521123444.28957-1-pali@kernel.org
generated by cgit (git 2.34.1) at 2025-09-13 06:47:12 +0000