summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2020-05-12net: dsa: sja1105: deny alterations of dsa_8021q VLANs from the bridgeVladimir Oltean
At the moment, this can never happen. The 2 modes that we operate in do not permit that: - SJA1105_VLAN_UNAWARE: we are guarded from bridge VLANs added by the user by the DSA core. We will later lift this restriction by setting ds->vlan_bridge_vtu = true, and that is where we'll need it. - SJA1105_VLAN_FILTERING_FULL: in this mode, dsa_8021q configuration is disabled. So the user is free to add these VLANs in the 1024-3071 range. The reason for the patch is that we'll introduce a third VLAN awareness state, where both dsa_8021q as well as the bridge are going to call our .port_vlan_add and .port_vlan_del methods. For that, we need a good way to discriminate between the 2. The easiest (and less intrusive way for upper layers) is to recognize the fact that dsa_8021q configurations are always driven by our driver - we _know_ when a .port_vlan_add method will be called from dsa_8021q because _we_ initiated it. So introduce an expect_dsa_8021q boolean which is only used, at the moment, for blacklisting VLANs in range 1024-3071 in the modes when dsa_8021q is active. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12net: dsa: sja1105: keep the VLAN awareness state in a driver variableVladimir Oltean
Soon we'll add a third operating mode to the driver. Introduce a vlan_state to make things more easy to manage, and use it where applicable. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12sfc: siena_check_caps() can be staticEdward Cree
Reported-by: Jakub Kicinski <kuba@kernel.org> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12sfc: actually wire up siena_check_caps()Edward Cree
Assign it to siena_a0_nic_type.check_caps function pointer. Fixes: be904b855200 ("sfc: make capability checking a nic_type function") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12net: ethernet: ti: Remove TI_CPTS_MOD workaroundClay McClure
My recent commit b6d49cab44b5 ("net: Make PTP-specific drivers depend on PTP_1588_CLOCK") exposes a missing dependency in defconfigs that select TI_CPTS without selecting PTP_1588_CLOCK, leading to linker errors of the form: drivers/net/ethernet/ti/cpsw.o: in function `cpsw_ndo_stop': cpsw.c:(.text+0x680): undefined reference to `cpts_unregister' ... That's because TI_CPTS_MOD (which is the symbol gating the _compilation_ of cpts.c) now depends on PTP_1588_CLOCK, and so is not enabled in these configurations, but TI_CPTS (which is the symbol gating _calls_ to the cpts functions) _is_ enabled. So we end up compiling calls to functions that don't exist, resulting in the linker errors. This patch fixes build errors and restores previous behavior by: - ensure PTP_1588_CLOCK=y in TI specific configs and CPTS will be built - remove TI_CPTS_MOD and, instead, add dependencies from CPTS in TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV as below: config TI_CPSW_SWITCHDEV ... depends on TI_CPTS || !TI_CPTS which will ensure proper dependencies PTP_1588_CLOCK -> TI_CPTS -> TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV and build type selection. Note. For NFS boot + CPTS all of above configs have to be built-in. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dan Murphy <dmurphy@ti.com> Cc: Tony Lindgren <tony@atomide.com> Fixes: b6d49cab44b5 ("net: Make PTP-specific drivers depend on PTP_1588_CLOCK") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Clay McClure <clay@daemons.net> [grygorii.strashko@ti.com: rewording, add deps cpsw/netcp from cpts, drop IS_REACHABLE] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12ionic: add more ethtool statsShannon Nelson
Add hardware port stats and a few more driver collected statistics to the ethtool stats output. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12ionic: more ionic name tweaksShannon Nelson
Fix up a few more local names that need an "ionic" prefix. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12ionic: ionic_intr_free parameter changeShannon Nelson
Change the ionic_intr_free parameter from struct ionic_lif to struct ionic since that's what it actually cares about. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12ionic: reset device at probeShannon Nelson
Once we're talking to the device, tell it to reset to be sure we've got a fresh, clean environment. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12ionic: shorter dev cmd wait timeShannon Nelson
Shorten our msleep time while polling for the dev command request to finish. Yes, checkpatch.pl complains that the msleep might actually go longer - that won't hurt, but we'll take the shorter time if we can get it. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12ionic: add support for more xcvr typesShannon Nelson
Add a couple more SFP and QSFP transceiver types to our ethtool get link ksettings. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12ionic: protect vf calls from fw resetShannon Nelson
When going into a firmware upgrade cycle, we set the device as not present to keep some user commands from trying to change the driver while we're only half there. Unfortunately, the ndo_vf_* calls don't check netif_device_present() so we need to add a check in the callbacks. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12ionic: updates to ionic FW api descriptionShannon Nelson
Lots of comment cleanup for better documentation, a few new fields added, and a few minor mistakes fixed up. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12ionic: support longer tx sg listsShannon Nelson
The version 1 Tx queues can use longer SG lists than the original version 0 queues, but we need to check to see if the firmware supports the v1 Tx queues. This implements the queue type query for all queue types, and uses the information to set up for using the longer Tx SG lists. Because the Tx SG list can be longer, we need to limit the max ring length to be sure we stay inside the boundaries of a DMA allocation max size, so we lower the max Tx ring size. The driver sets its highest known version in the Q_IDENTITY command, and the FW returns the highest version that it knows, bounded by the driver's version. The negotiated version number is later used in the Q_INIT commands. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12ionic: call ionic_port_init after fw-upgradeShannon Nelson
Since the fw has been re-inited, we need to refresh the port information dma address so we can see fresh port information. Let's call ionic_port_init again, and tweak it to allow for a call to simply refresh the existing dma address. Fixes: c672412f6172 ("ionic: remove lifs on fw reset") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12ionic: leave netdev mac alone after fw-upgradeShannon Nelson
When running in a bond setup, or some other potential configurations, the netdev mac may have been changed from the default device mac. Since the userland doesn't know about the changes going on under the covers in a fw-upgrade it doesn't know the re-push the mac filter. The driver needs to leave the netdev mac filter alone when rebuilding after the fw-upgrade. Fixes: c672412f6172 ("ionic: remove lifs on fw reset") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12mt76: mt7915: fix possible deadlock in mt7915_stopRyder Lee
make mac_work per phy instead of per device and fix a possible deadlock in mt7915_stop since mt7915_mac_work runs holding mt76 mutex Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: allocate proper size for tlv tagsRyder Lee
Allocating proper memory size according to tlv usage. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: add debugfs to track TxBF statusRyder Lee
Add debug counters to track status of beamformer and beamformee. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: add TxBF capabilitiesRyder Lee
This allows to set HE TxBF runtime stream capabilities Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: add Tx beamformee supportRyder Lee
Enable beamformee support. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: add Tx beamformer supportRyder Lee
Enable TxBF modules and trigger sounding process to support Tx beamformer. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: introduce mt7915_get_he_phy_capRyder Lee
Add a helper to reduce duplicate codes. This is a preliminary patch to add Tx beamforming support. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: usb: cancel ps work stopping the vifLorenzo Bianconi
Cancel possible power_save work before stopping the mt7663u interface Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7663u: add missing register definitionsLorenzo Bianconi
Add missing PLE/PSE base register definitions for mt7663u Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7663u: copy key pointer in mt7663u_mac_write_txwiLorenzo Bianconi
Copy key pointer value before running mt76_tx_status_skb_add() in mt7663u_mac_write_txwi since it will be overwritten setting mt76_tx_cb for probing frames Co-developed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: set runtime stream caps by mt76_phyRyder Lee
This patch can support concurrent dual-band operation. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: enable firmware module debug supportRyder Lee
This allows host driver to get useful information of some important modules. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Chih-Min Chen <chih-min.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: add tsf related callbacksRyder Lee
It is useful for IBSS Mesh to adjust t_clockdrift. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reported-by: Shayne Chen <shayne.chen@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: set peer Tx fixed rate through debugfsRyder Lee
Driver can manually set fixed rate for each peer through debugfs. May use .set_bitrate_mask callback and iterate stations under the current vif to achieve the aim once it supports HE rate. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: add .sta_statistics supportRyder Lee
Add useful debug counters since this generation uses struct rate_info to report HE tx rate. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: add .sta_add_debugfs supportRyder Lee
This generation supports much more per-peer statistics than legacy ones, so add .sta_add_debugfs accordingly. This is convenient to set/get more settings/counters in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: add Rx radiotap header supportRyder Lee
mac80211 expects the definition of what HE rate info is available inside astruct prepended to the skb. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: add HE capabilities support for peersRyder Lee
Set peer's bsic HE capabilities through starec. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Suggested-by: Shihwei Lin <shihwei.lin@mediatek.com> Tested-by: Shayne Chen <shayne.chen@mediatek.com> Tested-by: Chih-Min Chen <chih-min.chen@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Acked-by: Yiwei Chung <yiwei.chung@mediatek.com> Acked-by: YF Luo <yf.luo@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: add HE bss_conf support for interfacesRyder Lee
Add basic HE BSS's info for interfaces. As for the advanced features will be added gradually in the future patches. (i.e. BSS color, TWT, spatial reuse and OFDMA) Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Tested-by: Shayne Chen <shayne.chen@mediatek.com> Tested-by: Chih-Min Chen <chih-min.chen@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Acked-by: Yiwei Chung <yiwei.chung@mediatek.com> Acked-by: YF Luo <yf.luo@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: register per-phy HE capabilities for each interfaceRyder Lee
The capabilities for the HE interfaces are generated from the capabilities reported by the firmware. This should move to common file once we got other HE devices support. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: implement HE per-rate tx power supportRyder Lee
Use firmware support for applying per-rate limit and power offsets. This can support all HE RU types. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Tested-by: Chih-Min Chen <chih-min.chen@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Acked-by: Yiwei Chung <yiwei.chung@mediatek.com> Acked-by: YF Luo <yf.luo@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: enable Rx HE rate reportingRyder Lee
Enable HE rate reporting in Rx path Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: add mac80211 driver for MT7915 PCIe-based chipsetsRyder Lee
Add support for the MediaTek latest generation IEEE 802.11ax 4x4 device MT7915E, which supports concurrent dual-band operation at both 5GHz and 2.4GHz. Note that this patch just add basic part and will add more HE capabilities support in the further patches. The driver supports AP, Station, Mesh and monitor mode. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Chih-Min Chen <chih-min.chen@mediatek.com> Suggested-by: Shihwei Lin <shihwei.lin@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Acked-by: Yiwei Chung <yiwei.chung@mediatek.com> Acked-by: YF Luo <yf.luo@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: add HE phy modes and hardware queueRyder Lee
This is a preliminary patch to support 11ax deivces. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: adjust wcid size to support new 802.11ax generationRyder Lee
The newer 802.11ax devices (i.e. MT7915E) can connect to much more peers than previous generations. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: add Rx stats support for radiotapRyder Lee
HE deivces need to add Rx radiotap header. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: add support for HE RX rate reportingRyder Lee
Add support for encoding and reporting HE RX rates. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: avoid rx reorder buffer overflowRyder Lee
Enlarge slot to support 11ax 256 BA (256 MPDUs in an AMPDU) Signed-off-by: Chih-Min Chen <chih-min.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: scan all channels if not specifiedLorenzo Bianconi
Configure the mcu to scan all available channels if mac80211 does not provide any frequency list Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7663: add support to sched scan with randomise addrSean Wang
Add support to sched scan with randomise addr Co-developed-by: Wan-Feng Jiang <Wan-Feng.Jiang@mediatek.com> Signed-off-by: Wan-Feng Jiang <Wan-Feng.Jiang@mediatek.com> Co-developed-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7663: introduce WoW with net detect supportSean Wang
Introduce WoW with net detect support Co-developed-by: Wan-Feng Jiang <Wan-Feng.Jiang@mediatek.com> Signed-off-by: Wan-Feng Jiang <Wan-Feng.Jiang@mediatek.com> Co-developed-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: fix delta tx power for mt7663Lorenzo Bianconi
Fix mt7663 eeprom definitions for delta tx power parsing Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7663: fix target power parsingLorenzo Bianconi
Fix target parsing from eeprom/efuse partition for 7663 chipsets Fixes: f40ac0f3d3c0 ("mt76: mt7615: introduce mt7663e support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: fix ibss mode for mt7663Lorenzo Bianconi
Fix the following kernel warning adding an adhoc interface to a mt7663e device [ 233.363394] WARNING: CPU: 0 PID: 2345 at drivers/net/wireless/mt76/mt7615/mcu.c:1449 mt7615_mcu_uni_add_bss+0x15f/0x24e [mt7615_common] [ 233.363432] CPU: 0 PID: 2345 Comm: iw Tainted: G W 4.14.171 #12 [ 233.363434] Hardware name: HP Meep/Meep, BIOS Google_Meep.11297.75.0 06/17/2019 [ 233.363436] task: ffff9a1a4020e3c0 task.stack: ffffb9124113c000 [ 233.363441] RIP: 0010:mt7615_mcu_uni_add_bss+0x15f/0x24e [mt7615_common] [ 233.363443] RSP: 0018:ffffb9124113f730 EFLAGS: 00010246 [ 233.363446] RAX: 0000000000000024 RBX: ffff9a1a788c74e8 RCX: 41826d413aea9200 [ 233.363448] RDX: 0000000000000007 RSI: 0000000000000006 RDI: ffff9a1a7fc15418 [ 233.363450] RBP: ffffb9124113f7c0 R08: 0000000000000356 R09: 00000000ffff0a10 [ 233.363452] R10: 0000001000000000 R11: ffffffff93f2a4be R12: 0000000000000000 [ 233.363454] R13: ffff9a1a7383bd48 R14: ffffb9124113f77a R15: 0000000000000000 [ 233.363456] FS: 00007f203314ab80(0000) GS:ffff9a1a7fc00000(0000) knlGS:0000000000000000 [ 233.363458] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 233.363460] CR2: 00005a13d647c950 CR3: 0000000171238000 CR4: 00000000003406f0 [ 233.363462] Call Trace: [ 233.363470] mt7615_bss_info_changed+0x98/0xf4 [mt7615_common] [ 233.363484] ieee80211_bss_info_change_notify+0x139/0x1d4 [mt76_mac80211] [ 233.363496] ieee80211_ibss_disconnect+0x183/0x1bb [mt76_mac80211] [ 233.363507] ieee80211_ibss_leave+0x14/0xa0 [mt76_mac80211] [ 233.363519] __cfg80211_leave_ibss+0xa6/0x13a [cfg80211] [ 233.363528] cfg80211_netdev_notifier_call+0x8b/0x631 [cfg80211] [ 233.363535] ? packet_notifier+0x196/0x1a3 [ 233.363540] raw_notifier_call_chain+0x39/0x58 [ 233.363544] __dev_close_many+0x6b/0xf0 [ 233.363548] dev_close_many+0x62/0xe8 [ 233.363552] ? _raw_spin_unlock_irq+0xe/0x21 [ 233.363555] rollback_registered_many+0xf6/0x35c [ 233.363560] ? __rcu_read_unlock+0x4a/0x4a [ 233.363563] unregister_netdevice_queue+0x7f/0x105 [ 233.363573] ieee80211_del_iface+0x12/0x16 [mt76_mac80211] [ 233.363582] nl80211_del_interface+0xa8/0x124 [cfg80211] [ 233.363588] genl_rcv_msg+0x40b/0x481 [ 233.363592] ? genl_unbind+0xb8/0xb8 [ 233.363595] netlink_rcv_skb+0x85/0xf8 [ 233.363598] genl_rcv+0x28/0x36 [ 233.363601] netlink_unicast+0x165/0x1f8 [ 233.363604] netlink_sendmsg+0x35f/0x3a6 [ 233.363608] sock_sendmsg+0x38/0x48 [ 233.363611] ___sys_sendmsg+0x1bf/0x267 [ 233.363615] ? __inode_wait_for_writeback+0x72/0xd7 [ 233.363619] ? dentry_kill+0x69/0x76 [ 233.363622] ? dput+0xd1/0x170 [ 233.363624] __sys_sendmsg+0x52/0x8f [ 233.363628] do_syscall_64+0x6b/0xf7 [ 233.363632] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 233.363635] RIP: 0033:0x7f2032ca1264 [ 233.363637] RSP: 002b:00007ffec3668e38 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 233.363639] RAX: ffffffffffffffda RBX: 000058f7175e7880 RCX: 00007f2032ca1264 [ 233.363641] RDX: 0000000000000000 RSI: 00007ffec3668e98 RDI: 0000000000000003 [ 233.363643] RBP: 00007ffec3668e70 R08: 0000000000000001 R09: 00007f2032ce1fd0 [ 233.363645] R10: 000058f7175e2010 R11: 0000000000000246 R12: 000058f7175e7740 [ 233.363646] R13: 00007ffec3668ff0 R14: 000058f7175e2350 R15: 00007ffec3668e98 Fixes: f40ac0f3d3c0 ("mt76: mt7615: introduce mt7663e support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-09-14 20:14:11 +0000