summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2018-09-19net: hns3: Fix cmdq registers initialization issue for vfJian Shen
According to hardware's description, the head pointer register should be written before the tail pointer register while initializing the vf command queue. Otherwise, it may trigger an interrupt even though there is no command received. Fixes: fedd0c15d288 ("net: hns3: Add HNS3 VF IMP(Integrated Management Proc) cmd interface") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: hns3: Fix for setting speed for phy failed problemFuyun Liang
The function of genphy_read_status is that reading phy information from HW and using these information to update SW variable. If user is using ethtool to setting the speed of phy and service task is calling by hclge_get_mac_phy_link, the result of speed setting is uncertain. Because ethtool cmd will modified phydev and hclge_get_mac_phy_link also will modified phydev. Because phy state machine will update phy link periodically, we can just use phydev->link to check the link status. This patch removes function call of genphy_read_status. To ensure accuracy, this patch adds a phy state check. If phy state is not PHY_RUNNING, we consider link is down. Because in some scenarios, phydev->link may be link up, but phy state is not PHY_RUNNING. This is just an intermediate state. In fact, the link is not ready yet. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: hns3: Check hdev state when getting link statusPeng Li
By default, HW link status is up. If hclge_update_link_status is called before net up, driver will print "link up". It is not suitable. hdev state check is needed when getting link status. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: hns3: Set STATE_DOWN bit of hdev state when stopping netFuyun Liang
We clear STATE_DOWN bit of hdev state when starting net, but do not set it again when stopping net. It causes that the net is down, but hdev state is still up. STATE_DOWN bit of hdev state should be set when stopping net. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: hns3: Add support for hns3_nic_netdev_ops.ndo_do_ioctlXi Wang
This patch adds the .ndo_do_ioctl net_device_ops operation to support the PHY MII ioctl for PF driver. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: hns3: Remove packet statistics of publicPeng Li
All pf have permission to read packet statistics of public in hardware, but the read operation will clear registers which cause statistical inaccuracy. This patch removes all packet statistics of public. Signed-off-by: Junxin Chen <chenjunxin1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: hns3: Remove tx budget to clean more TX descriptors in a napiPeng Li
The the actual Tx work is minimal, driver can clean up as more Tx descriptors as possible in a irq. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: hns3: Add unlikely for buf_num checkPeng Li
This patch adds unlikely for buf_num check. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: hns3: Add default irq affinityPeng Li
All irq will float to cpu0 if do not set irq affinity. This patch adds default irq affinity in hns3 driver, users can also change the irq affinity in OS. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: sun: fix return type of ndo_start_xmit functionYueHaibing
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: amd: fix return type of ndo_start_xmit functionYueHaibing
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: broadcom: fix return type of ndo_start_xmit functionYueHaibing
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: xilinx: fix return type of ndo_start_xmit functionYueHaibing
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: toshiba: fix return type of ndo_start_xmit functionYueHaibing
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: marvell: fix return type of ndo_start_xmit functionYueHaibing
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvneta: do not explicitly set the carrier state in openAntoine Tenart
This patch removes the explicit call to netif_carrier_off() in mvneta_open() as this is already handled in phylink_start(). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvpp2: do not explicitly set the carrier state in openAntoine Tenart
This patch removes the explicit call to netif_carrier_off() in PPv2's open() path, as this is now handled in phylink_start(). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: phy: phylink: ensure the carrier is off when starting phylinkAntoine Tenart
Phylink made an assumption about the carrier state being down when calling phylink_start(). If this assumption isn't satisfied, the internal phylink state could misbehave and a net device could end up not being functional. This patch fixes this by explicitly calling netif_carrier_off() in phylink_start(). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvpp2: rename mvpp2_percpu function to mvpp2_threadAntoine Tenart
As the mvpp2_percpu_read/write/... functions aren't really per-cpu but per s/w thread, rename them to include 'thread' instead of 'percpu'. This is a cosmetic patch. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvpp2: handle cases where more CPUs are available than s/w threadsAntoine Tenart
The Marvell PPv2 network controller has 9 internal threads. The driver works fine when there are less CPUs available than threads. This isn't true if more CPUs are available. As this is a valid use case, handle this particular case. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvpp2: map the CPUs to threadsAntoine Tenart
This patch maps all uses of the CPU to threads. All this_cpu calls are replaced, and all smp_processor_id() calls are wrapped into the indirection. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvpp2: do not use the CPU number to access the per-thread registersAntoine Tenart
This patch reworks the Marvell PPv2 driver to stop using directly the CPU number to access per-thread registers. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvpp2: make mvpp2_read_relaxed staticAntoine Tenart
In the Marvell PPv2 driver the mvpp2_read_relaxed function is only used in a single file. Make it static and remove its prototype from the header. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvpp2: make the per-cpu helpers staticAntoine Tenart
The Marvell PPv2 driver has per-cpu functions. As they only are used in the main file, make them static and remove their prototype from the header. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvpp2: cpu should always be unsignedAntoine Tenart
Updates the PPv2 driver so that all CPU variables are unsigned, as it makes no sense to have a negative CPU number. This patch is cosmetic. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvpp2: fix the number of queues per cpu for PPv2.2Antoine Tenart
The Marvell PPv2.2 engine only has 8 Rx queues per CPU, while PPv2.1 has 16 of them. This patch updates the code so that the Rx queues mask width is selected given the version of the network controller used. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvpp2: do not update the queue mode while probingAntoine Tenart
This patch updates the probing function so that the queue mode isn't updated while probing, as the driver would silently end up using a configuration not wanted by the user. The patch adds an extra check to validate the chosen queue mode instead, and the driver will fail to probe if the configuration is invalid. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvpp2: rename the IRQs to match the hardwareAntoine Tenart
This patch renames the IRQs in the Marvell PPv2 driver as their current names match the way they are used in software. But this will change in the future, and those IRQs have nothing to do with Rx/Tx interrupts (this can be configured). The new binding also describe more interrupts as some where left out. The old binding support is kept for backward compatibility. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvpp2: increase the number of s/w threads to 9Antoine Tenart
This patch sets the number of s/w threads to 9, its maximum value, instead of 8. This is not a fix as only 4 of the s/w threads were used so far, but more could be used in the future. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19ravb: remove tx buffer addr 4byte alilgnment restriction for R-Car Gen3Kazuya Mizuguchi
This patch sets from two descriptor to one descriptor because R-Car Gen3 does not have the 4 bytes alignment restriction of the transmission buffer. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: phy: call state machine synchronously in phy_stopHeiner Kallweit
phy_stop() may be called e.g. when suspending, therefore all needed actions should be performed synchronously. Therefore add a synchronous call to the state machine. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: ti: Use FIELD_SIZEOF directly instead of reimplementing its functionzhong jiang
FIELD_SIZEOF is defined as a macro to calculate the specified value. Therefore, We prefer to use the macro rather than calculating its value. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: qede: Use FIELD_SIZEOF directly instead of reimplementing its functionzhong jiang
FIELD_SIZEOF is defined as a macro to calculate the specified value. Therefore, We prefer to use the macro rather than calculating its value. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18sfp: fix oops with ethtool -mRussell King
If a network interface is created prior to the SFP socket being available, ethtool can request module information. This unfortunately leads to an oops: Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = (ptrval) [00000008] *pgd=7c400831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1480 Comm: ethtool Not tainted 4.19.0-rc3 #138 Hardware name: Broadcom Northstar Plus SoC PC is at sfp_get_module_info+0x8/0x10 LR is at dev_ethtool+0x218c/0x2afc Fix this by not filling in the network device's SFP bus pointer until SFP is fully bound, thereby avoiding the core calling into the SFP bus code. Fixes: ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices and sfp cages") Reported-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: mvpp2: fix a txq_done race conditionAntoine Tenart
When no Tx IRQ is available, the txq_done() routine (called from tx_done()) shouldn't be called from the polling function, as in such case it is already called in the Tx path thanks to an hrtimer. This mostly occurred when using PPv2.1, as the engine then do not have Tx IRQs. Fixes: edc660fa09e2 ("net: mvpp2: replace TX coalescing interrupts with hrtimer") Reported-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18ravb: do not write 1 to reserved bitsKazuya Mizuguchi
EtherAVB hardware requires 0 to be written to status register bits in order to clear them, however, care must be taken not to: 1. Clear other bits, by writing zero to them 2. Write one to reserved bits This patch corrects the ravb driver with respect to the second point above. This is done by defining reserved bit masks for the affected registers and, after auditing the code, ensure all sites that may write a one to a reserved bit use are suitably masked. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: wan: remove redundant includezhong jiang
module.h already contained moduleparam.h, so it is safe to remove the redundant include. The issue is detected with the help of Coccinelle. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: ethernet: remove redundant includezhong jiang
module.h already contained moduleparam.h, so it is safe to remove the redundant include. The issue is detected with the help of Coccinelle. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: neterion: vxge: Use linux/io-64-nonatomic-lo-hi.hCorentin Labbe
This patch replace the custom definition of writeq/read and use ones defined in linux/io-64-nonatomic-lo-hi.h. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: neterion: s2io: Use linux/io-64-nonatomic-lo-hi.hCorentin Labbe
This patch replace the custom definition of writeq/read and use ones defined in linux/io-64-nonatomic-lo-hi.h. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: bnxt: Fix a uninitialized variable warning.zhong jiang
Fix the following compile warning: drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c:49:5: warning: ‘nvm_param.dir_type’ may be used uninitialized in this function [-Wmaybe-uninitialized] if (nvm_param.dir_type == BNXT_NVM_PORT_CFG) Signed-off-by: zhong jiang <zhongjiang@huawei.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: ibm: fix return type of ndo_start_xmit functionYueHaibing
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: cavium: fix return type of ndo_start_xmit functionYueHaibing
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: hns3: fix return type of ndo_start_xmit functionYueHaibing
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, also the implementation in this driver has returns 'netdev_tx_t' value, so just change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18Merge tag 'mlx5-fixes-2018-09-17' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2018-09-17 Sorry about the previous submission of this series which was mistakenly marked for net-next, here I am resending with 'net' mark. This series provides three fixes to mlx5 core and mlx5e netdevice driver. Please pull and let me know if there's any problem. For -stable v4.16: ('net/mlx5: Check for SQ and not RQ state when modifying hairpin SQ') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: ethernet: slicoss: remove duplicated include from slic.hYueHaibing
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: emac: fix fixed-link setup for the RTL8363SB switchChristian Lamparter
On the Netgear WNDAP620, the emac ethernet isn't receiving nor xmitting any frames from/to the RTL8363SB (identifies itself as a RTL8367RB). This is caused by the emac hardware not knowing the forced link parameters for speed, duplex, pause, etc. This begs the question, how this was working on the original driver code, when it was necessary to set the phy_address and phy_map to 0xffffffff. But I guess without access to the old PPC405/440/460 hardware, it's not possible to know. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18veth: rename pcpu_vstats as pcpu_lstatsLi RongQing
struct pcpu_vstats and pcpu_lstats have same members and usage, and pcpu_lstats is used in many files, so rename pcpu_vstats as pcpu_lstats to reduce duplicate definition Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: stmmac: Fixup the tail addr setting in xmit pathJose Abreu
Currently we are always setting the tail address of descriptor list to the end of the pre-allocated list. According to databook this is not correct. Tail address should point to the last available descriptor + 1, which means we have to update the tail address everytime we call the xmit function. This should make no impact in older versions of MAC but in newer versions there are some DMA features which allows the IP to fetch descriptors in advance and in a non sequential order so its critical that we set the tail address correctly. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Fixes: f748be531d70 ("stmmac: support new GMAC4") Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: stmmac: Rework coalesce timer and fix multi-queue racesJose Abreu
This follows David Miller advice and tries to fix coalesce timer in multi-queue scenarios. We are now using per-queue coalesce values and per-queue TX timer. Coalesce timer default values was changed to 1ms and the coalesce frames to 25. Tested in B2B setup between XGMAC2 and GMAC5. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Fixes: ce736788e8a ("net: stmmac: adding multiple buffers for TX") Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 10:58:32 +0000