summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2018-09-03net: hns3: Remove redundant codes of query advertised flow control abilitiyJian Shen
If the advertised flow control ability has been fetched using phy_ethtool_ksettings_get() or hclge_get_link_mode() then it is unnecessary to fetch them again later using hclge_get_flowctrl_adv(). This patch removes it. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net: hns3: Change the dst mac addr of loopback packetYunsheng Lin
Currently, the dst mac addr of loopback packet is the same as the host' mac addr, the SSU component may loop back the packet to host before the packet reaches mac or serdes, which will defect the purpose of mac or serdes selftest. This patch changes it by adding 0x1f to the last byte of dst mac addr. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net: hns3: Only update mac configuation when necessaryYunsheng Lin
Currently only fiber port checks if it is necessay to set the mac through firmware when link is changed, this patch unify the checking to allow the copper port do the checking too. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net: hns3: Preserve vlan 0 in hardware tableYunsheng Lin
When netdev is down, the stack will delete the vlan from hardware including vlan0, which will cause problem when doing loopback selftest when netdev is down. This patch fixes it by always preserving vlan 0 in hardware, because vlan 0 is defalut vlan, which should always be in hardware. Fixes: c39c4d98dc65 ("net: hns3: Add mac loopback selftest support in hns3 driver") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net: hns3: Fix ping exited problem when doing lp selftestYunsheng Lin
When ping is runnig and user executes the loopback selftest, the ping cmd will stop and exit. This patch fixes it by using the hns3_nic_net_open/stop to offline the netdev when doing loopback selftest. Fixes: c39c4d98dc65 ("net: hns3: Add mac loopback selftest support in hns3 driver") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net: hns3: Fix for loopback selftest failed problemYunsheng Lin
Tqp and mac need to be enabled when doing loopback selftest, ae_algo->ops->start/stop is used to do the job, there is a time window between ae_algo->ops->start/stop and loopback setup, which will cause selftest failed problem when there is frame coming in during that time window. This patch fixes it by enabling the tqp and mac during loopback setup process. Fixes: c39c4d98dc65 ("net: hns3: Add mac loopback selftest support in hns3 driver") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net: hns3: Implement shutdown ops in hns3 pci driverYunsheng Lin
This patch implements shutdown ops in hns3 pci driver, which unloads the hns3 driver and set the power state to D3hot. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net: hns3: Fix error of checking used vlan idJian Shen
PF uses hdev->vlan_table to manage the port vlan table. In function hclge_set_vlan_filter_hw(), it checks whether a vlan id has been used, by foreach all the vport bits. It should use macro HCLGE_VPORT_NUM, not VLAN_N_VID as the foreach condition. Fixes: 6c251711b37f ("net: hns3: Disable vf vlan filter when vf vlan table is full") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net: hns3: Fix for multicast failureHuazhong Tan
When the lower 24 bits of the IPV6 link-local addresses at both ends are the same, the multicast MAC address for Neigbour Discovery is the same. The multicast for Neigbour Discovery will fail. This patch fixes it by including the bonding uplink port in the multicast group. Fixes: 46a3df9f9718("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net: hns3: Fix for vf vlan delete failed problemYunsheng Lin
There are only 128 entries in vf vlan table, if user has added more than 128 vlan, fw will ignore it and disable the vf vlan table. So when user deletes the vlan entry that has not been set to vf vlan table, fw will return not found result and driver treat that as error, which will cause vlan delete failed problem. This patch fixes it by returning ok when fw returns not found result. Fixes: 6c251711b37f ("net: hns3: Disable vf vlan filter when vf vlan table is full") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03bnxt_en: Do not adjust max_cp_rings by the ones used by RDMA.Michael Chan
Currently, the driver adjusts the bp->hw_resc.max_cp_rings by the number of MSIX vectors used by RDMA. There is one code path in open that needs to check the true max_cp_rings including any used by RDMA. This code is now checking for the reduced max_cp_rings which will fail when the number of cp rings is very small. To fix this in a clean way, we don't adjust max_cp_rings anymore. Instead, we add a helper bnxt_get_max_func_cp_rings_for_en() to get the reduced max_cp_rings when appropriate. Fixes: ec86f14ea506 ("bnxt_en: Add ULP calls to stop and restart IRQs.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03bnxt_en: Clean up unused functions.Michael Chan
Remove unused bnxt_subtract_ulp_resources(). Change bnxt_get_max_func_irqs() to static since it is only locally used. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03bnxt_en: Fix firmware signaled resource change logic in open.Michael Chan
When the driver detects that resources have changed during open, it should reset the rx and tx rings to 0. This will properly setup the init sequence to initialize the default rings again. We also need to signal the RDMA driver to stop and clear its interrupts. We then call the RoCE driver to restart if a new set of default rings is successfully reserved. Fixes: 25e1acd6b92b ("bnxt_en: Notify firmware about IF state changes.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net/ibm/emac: wrong emac_calc_base call was used by typoIvan Mikhaylov
__emac_calc_base_mr1 was used instead of __emac4_calc_base_mr1 by copy-paste mistake for emac4syn. Fixes: 45d6e545505fd32edb812f085be7de45b6a5c0af ("net/ibm/emac: add 8192 rx/tx fifo size") Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03liquidio: Added delayed work for periodically updating the link statistics.Pradeep Nalla
Signed-off-by: Pradeep Nalla <pradeep.nalla@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03r8169: add support for NCube 8168 network cardAnthony Wong
This card identifies itself as: Ethernet controller [0200]: NCube Device [10ff:8168] (rev 06) Subsystem: TP-LINK Technologies Co., Ltd. Device [7470:3468] Adding a new entry to rtl8169_pci_tbl makes the card work. Link: http://launchpad.net/bugs/1788730 Signed-off-by: Anthony Wong <anthony.wong@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net/mlx5e: IPoIB, Use priv stats in completion rx flowFeras Daoud
Since the RQs are shared between all pkey interfaces, the stats should be taken from where the per-ring stats are stored instead of the parent RQ. Fixes: 4c6c615e3f30 ("net/mlx5e: IPoIB, Add PKEY child interface nic profile") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net/mlx5e: IPoIB, Add ndo stats support for IPoIB child devicesFeras Daoud
Expose RX and TX counters by implementing ndo_get_stats64 operation for child devices. Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net/mlx5e: IPoIB, Add ndo stats support for IPoIB netdevicesFeras Daoud
Expose RX and TX counters by implementing ndo_get_stats64 operation for both parent devices. After this change, all the relevant statistics can be retrieved using ifconfig. Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net/mlx5e: IPoIB, Initialize max_opened_tc in mlx5i_init flowFeras Daoud
Enhanced ipoib does not initialize max_opened_tc causing wrong ethtool statistics. As mlx5e_grp_sw_update_stats relies on this variable, without this change, the TX statistics will not be updated. Fixes: 05909babce53 ("net/mlx5e: Avoid reset netdev stats on configuration changes") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net: dsa: mv88e6xxx: Add SERDES phydev_link_change for 6352Andrew Lunn
The 6352 family has one SERDES interface, which can be used by either port 4 or port 5. Add interrupt support for the SERDES interface, and report when the link status changes. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net: dsa: mv88e6xxx: Fix writing to a PHY page.Andrew Lunn
After changing to the needed page, actually write the value to the register! Fixes: 09cb7dfd3f14 ("net: dsa: mv88e6xxx: describe PHY page and SerDes") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net: nixge: Fix Kconfig warning with OF_MDIOMoritz Fischer
Fix Kconfig warning with OF_MDIO where OF_MDIO was selected unconditionally instead of only when OF is actually enabled. Fixes 7e8d5755be0e ("net: nixge: Add support for 64-bit platforms") Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net: cadence: Fix a sleep-in-atomic-context bug in macb_halt_tx()Jia-Ju Bai
The kernel module may sleep with holding a spinlock. The function call paths (from bottom to top) in Linux-4.16 are: [FUNC] usleep_range drivers/net/ethernet/cadence/macb_main.c, 648: usleep_range in macb_halt_tx drivers/net/ethernet/cadence/macb_main.c, 730: macb_halt_tx in macb_tx_error_task drivers/net/ethernet/cadence/macb_main.c, 721: _raw_spin_lock_irqsave in macb_tx_error_task To fix this bug, usleep_range() is replaced with udelay(). This bug is found by my static analysis tool DSAC. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net: mvneta: reduce smp_processor_id() calling in mvneta_tx_done_gbeJisheng Zhang
In the loop of mvneta_tx_done_gbe(), we call the smp_processor_id() each time, move the call out of the loop to optimize the code a bit. Before the patch, the loop looks like(under arm64): ldr x1, [x29,#120] ... ldr w24, [x1,#36] ... bl 0 <_raw_spin_lock> str w24, [x27,#132] ... After the patch, the loop looks like(under arm64): ... bl 0 <_raw_spin_lock> str w23, [x28,#132] ... where w23 is loaded so be ready before the loop. >From another side, mvneta_tx_done_gbe() is called from mvneta_poll() which is in non-preemptible context, so it's safe to call the smp_processor_id() function once. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net: mvneta: enable NETIF_F_RXCSUM by defaultJisheng Zhang
The code and HW supports NETIF_F_RXCSUM, so let's enable it by default. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net: mvneta: Don't check NETIF_F_GRO ourselfJisheng Zhang
napi_gro_receive() checks NETIF_F_GRO bit as well, if the bit is not set, we will go through GRO_NORMAL in napi_skb_finish(), so fall back to netif_receive_skb_internal(), so we don't need to check NETIF_F_GRO ourself. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net: ethernet: cpsw-phy-sel: prefer phandle for phy selTony Lindgren
The cpsw-phy-sel device is not a child of the cpsw interconnect target module. It lives in the system control module. Let's fix this issue by trying to use cpsw-phy-sel phandle first if it exists and if not fall back to current usage of trying to find the cpsw-phy-sel child. That way the phy sel driver can be a child of the system control module where it belongs in the device tree. Without this fix, we cannot have a proper interconnect target module hierarchy in device tree for things like genpd. Note that deferred probe is mostly not supported by cpsw and this patch does not attempt to fix that. In case deferred probe support is needed, this could be added to cpsw_slave_open() and phy_connect() so they start handling and returning errors. For documenting it, looks like the cpsw-phy-sel is used for all cpsw device tree nodes. It's missing the related binding documentation, so let's also update the binding documentation accordingly. Cc: devicetree@vger.kernel.org Cc: Andrew Lunn <andrew@lunn.ch> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-01net: bgmac: remove set but not used variable 'err'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/broadcom/bgmac.c: In function 'bgmac_dma_alloc': drivers/net/ethernet/broadcom/bgmac.c:619:6: warning: variable 'err' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-01net: dsa: b53: Provide sensible defaultsFlorian Fainelli
The SRAB driver is the default way to communicate with the integrated switch on iProc platforms and the MMAP driver is the way to communicate with the integrated switch on DSL BCM63xx and CM BCM33xx. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-01liquidio: remove set but not used variable 'irh'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/cavium/liquidio/request_manager.c: In function 'lio_process_iq_request_list': drivers/net/ethernet/cavium/liquidio/request_manager.c:383:27: warning: variable 'irh' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-01qed: Lower the severity of a dcbx log message.Sudarsana Reddy Kalluru
Driver displays an error message for each unrecognized dcbx TLV that's received from the peer or configured on the device. It is observed that syslog will be flooded with such messages in certain scenarios e.g., frequent link-flaps/lldp-transactions. Changing the severity of this message to verbose level as it's not an error scenario/message. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-01bnxt_en: remove set but not used variable 'rx_stats'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c: In function 'bnxt_vf_rep_rx': drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c:212:28: warning: variable 'rx_stats' set but not used [-Wunused-but-set-variable] struct bnxt_vf_rep_stats *rx_stats; Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-01net: remove duplicated include from net_failover.cYueHaibing
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-01net: stmmac: Add CBS support in XGMAC2Jose Abreu
XGMAC2 uses the same CBS mechanism as GMAC5, only registers offset changes. Lets use the same TC callbacks and implement the .config_cbs callback in XGMAC2 core. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-01dpaa2-eth: Move DPAA2 Ethernet driver from staging to drivers/netIoana Radulescu
The DPAA2 Ethernet driver supports Freescale/NXP SoCs with DPAA2 (DataPath Acceleration Architecture v2). The driver manages network objects discovered on the fsl-mc bus. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31ibmvnic: Include missing return code checks in reset functionThomas Falcon
Check the return codes of these functions and halt reset in case of failure. The driver will remain in a dormant state until the next reset event, when device initialization will be re-attempted. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()Dexuan Cui
This patch fixes the race between netvsc_probe() and rndis_set_subchannel(), which can cause a deadlock. These are the related 3 paths which show the deadlock: path #1: Workqueue: hv_vmbus_con vmbus_onmessage_work [hv_vmbus] Call Trace: schedule schedule_preempt_disabled __mutex_lock __device_attach bus_probe_device device_add vmbus_device_register vmbus_onoffer vmbus_onmessage_work process_one_work worker_thread kthread ret_from_fork path #2: schedule schedule_preempt_disabled __mutex_lock netvsc_probe vmbus_probe really_probe __driver_attach bus_for_each_dev driver_attach_async async_run_entry_fn process_one_work worker_thread kthread ret_from_fork path #3: Workqueue: events netvsc_subchan_work [hv_netvsc] Call Trace: schedule rndis_set_subchannel netvsc_subchan_work process_one_work worker_thread kthread ret_from_fork Before path #1 finishes, path #2 can start to run, because just before the "bus_probe_device(dev);" in device_add() in path #1, there is a line "object_uevent(&dev->kobj, KOBJ_ADD);", so systemd-udevd can immediately try to load hv_netvsc and hence path #2 can start to run. Next, path #2 offloads the subchannal's initialization to a workqueue, i.e. path #3, so we can end up in a deadlock situation like this: Path #2 gets the device lock, and is trying to get the rtnl lock; Path #3 gets the rtnl lock and is waiting for all the subchannel messages to be processed; Path #1 is trying to get the device lock, but since #2 is not releasing the device lock, path #1 has to sleep; since the VMBus messages are processed one by one, this means the sub-channel messages can't be procedded, so #3 has to sleep with the rtnl lock held, and finally #2 has to sleep... Now all the 3 paths are sleeping and we hit the deadlock. With the patch, we can make sure #2 gets both the device lock and the rtnl lock together, gets its job done, and releases the locks, so #1 and #3 will not be blocked for ever. Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31net: dsa: mv88e6xxx: Share main switch IRQMarek Behún
On some boards the interrupt can be shared between multiple devices. For example on Turris Mox the interrupt is shared between all switches. Signed-off-by: Marek Behun <marek.behun@nic.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31nfp: wait for posted reconfigs when disabling the deviceJakub Kicinski
To avoid leaking a running timer we need to wait for the posted reconfigs after netdev is unregistered. In common case the process of deinitializing the device will perform synchronous reconfigs which wait for posted requests, but especially with VXLAN ports being actively added and removed there can be a race condition leaving a timer running after adapter structure is freed leading to a crash. Add an explicit flush after deregistering and for a good measure a warning to check if timer is running just before structures are freed. Fixes: 3d780b926a12 ("nfp: add async reconfiguration mechanism") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31veth: add software timestampingMichael Walle
Provide a software TX timestamp as well as the ethtool query interface and report the software timestamp capabilities. Tested with "ethtool -T" and two linuxptp instances each bound to a tunnel endpoint. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-09-01 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add AF_XDP zero-copy support for i40e driver (!), from Björn and Magnus. 2) BPF verifier improvements by giving each register its own liveness chain which allows to simplify and getting rid of skip_callee() logic, from Edward. 3) Add bpf fs pretty print support for percpu arraymap, percpu hashmap and percpu lru hashmap. Also add generic percpu formatted print on bpftool so the same can be dumped there, from Yonghong. 4) Add bpf_{set,get}sockopt() helper support for TCP_SAVE_SYN and TCP_SAVED_SYN options to allow reflection of tos/tclass from received SYN packet, from Nikita. 5) Misc improvements to the BPF sockmap test cases in terms of cgroup v2 interaction and removal of incorrect shutdown() calls, from John. 6) Few cleanups in xdp_umem_assign_dev() and xdpsock samples, from Prashant. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-01xsk: i40e: get rid of useless struct xdp_umem_propsMagnus Karlsson
This commit gets rid of the structure xdp_umem_props. It was there to be able to break a dependency at one point, but this is no longer needed. The values in the struct are instead stored directly in the xdp_umem structure. This simplifies the xsk code as well as af_xdp zero-copy drivers and as a bonus gets rid of one internal header file. The i40e driver is also adapted to the new interface in this commit. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-01i40e: fix possible compiler warning in xsk TX pathMagnus Karlsson
With certain gcc versions, it was possible to get the warning "'tx_desc' may be used uninitialized in this function" for the i40e_xmit_zc. This was not possible, however this commit simplifies the code path so that this warning is no longer emitted. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-30i40e: Prevent deleting MAC address from VF when set by PFPatryk Małek
To prevent VF from deleting MAC address that was assigned by the PF we need to check for that scenario when we try to delete a MAC address from a VF. Signed-off-by: Patryk Małek <patryk.malek@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-30i40evf: cancel workqueue sync for adminq when a VF is removedLihong Yang
If a VF is being removed, there is no need to continue with the workqueue sync for the adminq task, thus cancel it. Without this call, when VFs are created and removed right away, there might be a chance for the driver to crash with events stuck in the adminq. Signed-off-by: Lihong Yang <lihong.yang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-30i40e: hold the rtnl lock on clearing interrupt schemePatryk Małek
Hold the rtnl lock when we're clearing interrupt scheme in i40e_shutdown and in i40e_remove. Signed-off-by: Patryk Małek <patryk.malek@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-30i40evf: Don't enable vlan stripping when rx offload is turned onPatryk Małek
With current implementation of i40evf_set_features when user sets any offload via ethtool we set I40EVF_FLAG_AQ_ENABLE_VLAN_STRIPPING as a required aq which triggers driver to call i40evf_enable_vlan_stripping. This shouldn't take place. This patches fixes it by setting the flag only when VLAN offload is turned on. Signed-off-by: Patryk Małek <patryk.malek@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-30i40e: Check and correct speed values for link on openJan Sokolowski
If our card has been put in an unstable state due to other drivers interacting with it, speed settings might be incorrect. If incorrect, forcefully reset them on open to known default values. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-30i40e: report correct statistics when XDP is enabledBjörn Töpel
When XDP is enabled, the driver will report incorrect statistics. Received frames will reported as transmitted frames. This commits fixes the i40e implementation of ndo_get_stats64 (struct net_device_ops), so that iproute2 will report correct statistics (e.g. when running "ip -stats link show dev eth0") even when XDP is enabled. Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Fixes: 74608d17fe29 ("i40e: add support for XDP_TX action") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit (git 2.34.1) at 2025-09-12 02:24:09 +0000