summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2018-08-30i40e: static analysis report from communityMartyna Szapar
Static analysis tools report a problem from original driver submission. Removing unnecessary check in condition. Signed-off-by: Martyna Szapar <martyna.szapar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-30i40evf: set IFF_UNICAST_FLT flag for the VFLihong Yang
Set IFF_UNICAST_FLT flag for the VF to prevent it from entering promiscuous mode when macvlan is added to the VF. Signed-off-by: Lihong Yang <lihong.yang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-30i40e: use correct length for strncpyMitch Williams
Caught by GCC 8. When we provide a length for strncpy, we should not include the terminating null. So we must tell it one less than the size of the destination buffer. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-30i40evf: Validate the number of queues a PF sendsPaul M Stillwell Jr
A PF can send any number of queues to the VF and the VF may not be able to support that many. Check to see that the number of queues is less than or equal to the max number of queues the VF can have. Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-30i40evf: Change a VF mac without reloading the VF driverPaweł Jabłoński
Add possibility to change a VF mac address from host side without reloading the VF driver on the guest side. Without this patch it is not possible to change the VF mac because executing i40evf_virtchnl_completion function with VIRTCHNL_OP_GET_VF_RESOURCES opcode resets the VF mac address to previous value. Signed-off-by: Paweł Jabłoński <pawel.jablonski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-30i40evf: update ethtool stats code and use helper functionsJacob Keller
Fix a bug in the way we handled VF queues, by always showing stats for the maximum number of queues, even if they aren't allocated. It is not safe to change the number of strings reported to ethtool, as grabbing statistics occurs over multiple ethtool ops for which the rtnl_lock() cannot be held the entire time. Avoid this by always reporting queue stats for the maximum number of queues in the netdevice. Share some of the helper functionality for adding stats with the PF code in i40e_ethtool_stats.h This should reduce the chance of potential future bugs, and make adding new statistics easier. Note for the queue stats, unlike the PF driver we do not keep an array of queue pointers, but an array of queues, so care must be taken to avoid accessing queue memory that hasn't yet been allocated. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-30i40e: move ethtool stats boiler plate code to i40e_ethtool_stats.hJacob Keller
Move the boiler plate structures and helper functions we recently added into their own header file, so that the complete collection is located together. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-30i40e: convert queue stats to i40e_stats arrayJacob Keller
Use an i40e_stats array to handle the queue stats, instead of coding similar functionality separately. Because of how the queue stats are accessed on some kernels, we can't easily use i40e_add_ethtool_stats. Instead, implement a separate helper, i40e_add_queue_stats, which we'll use instead. This helper will correctly implement the u64_stats_fetch_begin_irq logic and allow retries until successful. We share the most complex code by re-using i40e_add_one_ethtool_stat. This logic additionally easily supports skipping disabled rings by using a ternary operator before calling the u64_stats_fetch_begin_irq() function, so that we correctly zero-out the stats values without having to perform two separate sections of code. This significantly reduces the boiler plate code in i40e_get_ethtool_stats, and helps keep the complex logic contained to as few functions as possible. With this patch, we've finally converted all the statistics to use the helpers and the i40e_stats function. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-29Merge tag 'mac80211-next-for-davem-2018-08-29' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Only a few changes at this point: * new channels in 60 GHz * clarify (average) ACK signal reporting API * expose ieee80211_send_layer2_update() for all drivers * start/stop mac80211's TXQs properly when required * avoid regulatory restore with IE ignoring * spelling: contidion -> condition * fully implement WFA Multi-AP backhaul ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29net: mvpp2: initialize port of_node pointerBaruch Siach
Without a valid of_node in struct device we can't find the mvpp2 port device by its DT node. Specifically, this breaks of_find_net_device_by_node(). For example, the Armada 8040 based Clearfog GT-8K uses Marvell 88E6141 switch connected to the &cp1_eth2 port: &cp1_mdio { ... switch0: switch0@4 { compatible = "marvell,mv88e6085"; ... ports { ... port@5 { reg = <5>; label = "cpu"; ethernet = <&cp1_eth2>; }; }; }; }; Without this patch, dsa_register_switch() returns -EPROBE_DEFER because of_find_net_device_by_node() can't find the device_node of the &cp1_eth2 device. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29vxlan: reduce dirty cache line in vxlan_find_macLi RongQing
vxlan_find_mac() unconditionally set f->used for every packet, this causes a cache miss for every packet, since remote, hlist and used of vxlan_fdb share the same cache line, which are accessed when send every packets. so f->used is set only if not equal to jiffies, to reduce dirty cache line times, this gives 3% speed-up with small packets. Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29liquidio: remove obsolete functions and data structuresFelix Manlunas
1. Remove unused functions and data structures. 2. Change the sending of the remaining soft commands to synchronous. Signed-off-by: Weilin Chang <weilin.chang@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29liquidio: change octnic_ctrl_pkt to do synchronous soft commandsFelix Manlunas
1. Change struct octnic_ctrl_pkt to support synchronous operation. 2. Change code which use structure octnic_ctrl_pkt to send sc's synchronously. Signed-off-by: Weilin Chang <weilin.chang@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29liquidio: make soft command calls synchronousFelix Manlunas
1. Add wait_for_sc_completion_timeout() for waiting the response and handling common response errors 2. Send sc's synchronously: remove unused callback function, and context structure; use wait_for_sc_completion_timeout() to wait its response. Signed-off-by: Weilin Chang <weilin.chang@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29liquidio: improve soft command handlingFelix Manlunas
1. Set LIO_SC_MAX_TMO_MS as the maximum timeout value for a soft command (sc). All sc's use this value as a hard timeout value. Add expiry_time in struct octeon_soft_command to keep the hard timeout value. The field wait_time and timeout in struct octeon_soft_command will be obsoleted in the last patch of this patch series. 2. Add processing a synchronous sc in sc response thread lio_process_ordered_list. The memory allocated for a synchronous sc will be freed by lio_process_ordered_list() to the sc pool. 3. Add two response lists for lio_process_ordered_list to process the storage allocated for sc's: OCTEON_DONE_SC_LIST response list keeps all sc's which will be freed to the pool after their requestors have finished processing the responses. OCTEON_ZOMBIE_SC_LIST response list keeps all sc's which have got LIO_SC_MAX_TMO_MS timeout. When an sc gets a hard timeout, lio_process_order_list() will recheck its status 1 ms later. If the status has not updated by the firmware at that time, the sc will be removed from OCTEON_DONE_SC_LIST response list to OCTEON_ZOMBIE_SC_LIST response list. The sc's in the OCTEON_ZOMBIE_SC_LIST response list will be freed when the driver is unloaded. Signed-off-by: Weilin Chang <weilin.chang@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29net: nixge: Add support for 64-bit platformsMoritz Fischer
Add support for 64-bit platforms to driver. The hardware only supports 32-bit register accesses so the accesses need to be split up into two writes when setting the current and tail descriptor values. Signed-off-by: Moritz Fischer <mdf@kernel.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29net: bcmgenet: use MAC link status for fixed phyDoug Berger
When using the fixed PHY with GENET (e.g. MOCA) the PHY link status can be determined from the internal link status captured by the MAC. This allows the PHY state machine to use the correct link state with the fixed PHY even if MAC link event interrupts are missed when the net device is opened. Fixes: 8d88c6ebb34c ("net: bcmgenet: enable MoCA link state change detection") Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29liquidio: fix race condition in instruction completion processingRick Farrington
In lio_enable_irq, the pkt_in_done count register was being cleared to zero. However, there could be some completed instructions which were not yet processed due to budget and limit constraints. So, only write this register with the number of actual completions that were processed. Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29liquidio: remove unnecessary delay when processing IQ responsesRick Farrington
Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-298390/etherh: convert to ethtool_{get, set}_link_ksettingsMichal Kubecek
This is the last in-tree driver using the old {get,set}_settings API. Note: this is only build tested. I don't have the hardware at hand; as it's 10Mb/s half duplex device and driver can be built only for one subplatform of 32-bit ARM (Acorn RiscPC), it may be difficult to find someone who does. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29net: thunderbolt: Convert to use SPDX identifierMika Westerberg
This gets rid of the licence boilerblate in favor of SPDX identifier which only takes a single line comment. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29net: ethernet: Convert to using %pOFn instead of device_node.nameRob Herring
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: "David S. Miller" <davem@davemloft.net> Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Salil Mehta <salil.mehta@huawei.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Felix Fietkau <nbd@openwrt.org> Cc: John Crispin <john@phrozen.org> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Nelson Chang <nelson.chang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: netdev@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29net: stmmac: build the dwmac-socfpga platform driver for Stratix10Dinh Nguyen
The Stratix10 SoC is an AARCH64 based platform that shares the same ethernet controller that is on other SoCFPGA platforms. Build the platform driver. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29sh_eth: Add R7S9210 supportChris Brandt
Add support for the R7S9210 which is part of the RZ/A2 series. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29net: hns: add netif_carrier_off before change speed and duplexPeng Li
If there are packets in hardware when changing the speed or duplex, it may cause hardware hang up. This patch adds netif_carrier_off before change speed and duplex in ethtool_ops.set_link_ksettings, and adds netif_carrier_on after complete the change. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29net: hns: add the code for cleaning pkt in chipPeng Li
If there are packets in hardware when changing the speed or duplex, it may cause hardware hang up. This patch adds the code for waiting chip to clean the all pkts(TX & RX) in chip when the driver uses the function named "adjust link". This patch cleans the pkts as follows: 1) close rx of chip, close tx of protocol stack. 2) wait rcb, ppe, mac to clean. 3) adjust link 4) open rx of chip, open tx of protocol stack. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devicesAzat Khuzhin
I have two Ethernet adapters: r8169 0000:03:01.0 eth0: RTL8169sb/8110sb, 00:14:d1:14:2d:49, XID 10000000, IRQ 18 r8169 0000:01:00.0 eth0: RTL8168e/8111e, 64:66:b3:11:14:5d, XID 2c200000, IRQ 30 And after upgrading from linux 4.15 [1] to linux 4.18+ [2] RTL8169sb failed to receive any packets. tcpdump shows a lot of checksum mismatch. [1]: a0f79386a4968b4925da6db2d1daffd0605a4402 [2]: 0519359784328bfa92bf0931bf0cff3b58c16932 (4.19 merge window opened) I started bisecting and the found that [3] breaks it. According to [4]: "For 8110S, 8110SB, and 8110SC series, the initial value of RxConfig needs to be set after the tx/rx is enabled." So I moved rtl_init_rxcfg() after enabling tx/rs and now my adapter works (RTL8168e works too). [3]: 3559d81e76bfe3803e89f2e04cf6ef7ab4f3aace [4]: e542a2269f232d61270ceddd42b73a4348dee2bb ("r8169: adjust the RxConfig settings.") Also drop "rx" from rtl_set_rx_tx_config_registers(), since it does nothing with it already. Fixes: 3559d81e76bfe3803e89f2e04cf6ef7ab4f3aace ("r8169: simplify rtl_hw_start_8169") Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Signed-off-by: Azat Khuzhin <a3at.mail@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29Revert "net: stmmac: Do not keep rearming the coalesce timer in stmmac_xmit"Jerome Brunet
This reverts commit 4ae0169fd1b3c792b66be58995b7e6b629919ecf. This change in the handling of the coalesce timer is causing regression on (at least) amlogic platforms. Network will break down very quickly (a few seconds) after starting a download. This can easily be reproduced using iperf3 for example. The problem has been reported on the S805, S905, S912 and A113 SoCs (Realtek and Micrel PHYs) and it is likely impacting all Amlogics platforms using Gbit ethernet No problem was seen with the platform using 10/100 only PHYs (GXL internal) Reverting change brings things back to normal and allows to use network again until we better understand the problem with the coalesce timer. Cc: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29i40e: add AF_XDP zero-copy Tx supportMagnus Karlsson
This patch adds zero-copy Tx support for AF_XDP sockets. It implements the ndo_xsk_async_xmit netdev ndo and performs all the Tx logic from a NAPI context. This means pulling egress packets from the Tx ring, placing the frames on the NIC HW descriptor ring and completing sent frames back to the application via the completion ring. The regular XDP Tx ring is used for AF_XDP as well. This rationale for this is as follows: XDP_REDIRECT guarantees mutual exclusion between different NAPI contexts based on CPU id. In other words, a netdev can XDP_REDIRECT to another netdev with a different NAPI context, since the operation is bound to a specific core and each core has its own hardware ring. As the AF_XDP Tx action is running in the same NAPI context and using the same ring, it will also be protected from XDP_REDIRECT actions with the exact same mechanism. As with AF_XDP Rx, all AF_XDP Tx specific functions are added to i40e_xsk.c. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-08-29i40e: move common Tx functions to i40e_txrx_common.hMagnus Karlsson
This patch prepares for the upcoming zero-copy Tx functionality, by moving common functions and refactor chunks of code into re-usable functions, used both by the regular path and zero-copy path. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-08-29i40e: add AF_XDP zero-copy Rx supportBjörn Töpel
This patch adds zero-copy Rx support for AF_XDP sockets. Instead of allocating buffers of type MEM_TYPE_PAGE_SHARED, the Rx frames are allocated as MEM_TYPE_ZERO_COPY when AF_XDP is enabled for a certain queue. All AF_XDP specific functions are added to a new file, i40e_xsk.c. Note that when AF_XDP zero-copy is enabled, the XDP action XDP_PASS will allocate a new buffer and copy the zero-copy frame prior passing it to the kernel stack. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-08-29i40e: move common Rx functions to i40e_txrx_common.hBjörn Töpel
This patch prepares for the upcoming zero-copy Rx functionality, by moving/changing linkage of common functions, used both by the regular path and zero-copy path. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-08-29i40e: refactor Rx path for re-useBjörn Töpel
In this commit, the Rx path is refactored some, as a step torwards the introduction AF_XDP Rx zero-copy. The page re-use counter is moved into the i40e_reuse_rx_page, instead of bumping the counter in many places. The Rx buffer page clearing is moved for better readability. Lastely, functions to update statistics and bump the XDP Tx ring are introduced. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-08-29i40e: added queue pair disable/enable functionsBjörn Töpel
Add functions for queue pair enable/disable. Instead of resetting the whole device, only the affected queue pair is disabled or enabled. This plumbing is used in a later commit, when zero-copy AF_XDP support is introduced. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-08-28nfp: make RTsym users handle absolute symbols correctlyJakub Kicinski
Make the RTsym users access the size via the helper, which takes care of special handling of absolute symbols. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Francois H. Theron <francois.theron@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-28nfp: support access to absolute RTsymsJakub Kicinski
Add support in nfpcore for reading the absolute RTsyms. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Francois H. Theron <francois.theron@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-28nfp: convert all RTsym users to use new read/write helpersJakub Kicinski
Convert all users of RTsym to the new set of helpers which handle all targets correctly. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Francois H. Theron <francois.theron@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-28nfp: convert existing RTsym helpers to full target decodingJakub Kicinski
Make nfp_rtsym_{read,write}_le() and nfp_rtsym_map() use the new target resolution helpers to allow accessing in-cache symbols. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Francois H. Theron <francois.theron@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-28nfp: pass cpp_id to nfp_cpp_map_area()Jakub Kicinski
Align nfp_cpp_map_area() with other CPP-level APIs and pass encoded cpp_id/dest rather than target, action, domain tuple. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Francois H. Theron <francois.theron@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-28nfp: add RTsym access helpersJakub Kicinski
RTsyms may have special encodings for more complex symbol types. For example symbols which are placed in external memory unit's cache directly, constants or local memory. Add set of helpers which will check for those special encodings and handle them correctly. For now only add direct cache accesses, we don't have a need to access the other ones in foreseeable future. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Francois H. Theron <francois.theron@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-28nfp: add basic errors messages to target logicJakub Kicinski
Add error prints to CPP target encoding/decoding logic, otherwise it's quite hard to pin point the reasons why read or write operations fail. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Francois H. Theron <francois.theron@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-28nfp: save the MU locality field offsetJakub Kicinski
We will soon need the MU locality field offset much more often than just for decoding MIP address. Save it in nfp_cpp for quick access. Note that we can already reuse the target config from nfp_cpp, no need to do the XPB read. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Francois H. Theron <francois.theron@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-28nfp: refactor the per-chip PCIe configJakub Kicinski
Use a switch statement instead of ifs for code dependent on chip version. While at it make sure we fail for unknown chip revisions. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-28nfp: add support for NFP5000Jakub Kicinski
Add NFP5000 to supported chips, the chip is backward compatible with NFP4000 and NFP6000, so core PCIe code needs to handle it the same way as 4k and 6k. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-28nfp: abm: look up MAC addresses via management FWJakub Kicinski
In multi-host scenarios Management FW may allocate MAC addresses at runtime, we have to use the indirect lookup to find them. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-28nfp: add support for indirect HWinfo lookupJakub Kicinski
Management FW can adjust some of the information in the HWinfo table at runtime. In some cases reading the table directly will not yield correct results. Add a NSP command for looking up information. Up until now we weren't making use of any of the values which may get adjusted. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-28nfp: interpret extended FW load result codesJakub Kicinski
To enable easier FW distribution NFP can now automatically select between FW stored on the flash and loaded from the kernel. If FW loading policy is set to auto it will compare the versions of FW from the host and from the flash and load the newer one. If FW type doesn't match (e.g. one advanced application vs another) the FW from the host takes precedence, unless one of them is the basic NIC firmware, in which case the non-basic-NIC FW is selected. This automatic selection mechanism requires we inform user what the verdict was. Print a message to the logs explaining the decision and the reason. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-28nfp: attempt FW load from flashJakub Kicinski
Flash may contain a default NFP application FW. This application can either be put there by the user (with ethtool -f) or shipped with the card. If file system FW is not found, attempt to load this flash stored app FW. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-28nfp: encapsulate NSP command arguments into structsJakub Kicinski
There is already a fair number of arguments to nfp_nsp_command() family of functions. Encapsulate them into structures to make adding new ones easier. No functional changes. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-28Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2018-08-28 This series contains new features and implementation updates for the ice driver. Anirudh reworks the current flex programming logic to add support for a second flex descriptor profile. Updated the transmit scheduler code to handle changes to the spec, specifically the firmware expects a 4KB buffer at all times so fix the default scheduler topology buffer size. Also the maximum children per node per layer is replaced by maximum sibling group size. Adds a check to ensure a reset is not in progress before exercising a control queue operation. Refactored the switch rule management functions and structures to simply the logic and to add a common function to search for a rule entry and add a new rule entry. Refactored the VSI allocation, deletion and rebuild flow so that on reset we can restore all the filters that were previously added. Did some spring cleaning of define names and macros. Dan updates the admin queue command for requesting resource ownership to the latest specification by adding new enum's and change the locks. Zhenning optimizes the driver by using the existing buffer in a structure directly versus a local array. Chinh implements handlers for ethtool for get and set link settings. Sudheer implements transmit hang/timeout detection and malicious driver detection in the driver. Md Fahad Iqbal implements the get and set bridge mode operations. Hieu adds the ability for firmware logging during initialization. Brett updates the driver to only enable VSI transmit and receive pruning when VLAN 0 is active, and when VLAN 0 is removed/not active, pruning is disabled. Akeem adds a flag to use for stopping the service task. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 04:31:59 +0000