summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2017-08-13net: vrf: Drop local rtable and rt6_infoDavid Ahern
The VRF cached rtable and rt6_info for local traffic are no longer needed and actually prevent local traffic through enslaved devices. Remove them. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-13bonding: ratelimit failed speed/duplex update warningAndreas Born
bond_miimon_commit() handles the UP transition for each slave of a bond in the case of MII. It is triggered 10 times per second for the default MII Polling interval of 100ms. For device drivers that do not implement __ethtool_get_link_ksettings() the call to bond_update_speed_duplex() fails persistently while the MII status could remain UP. That is, in this and other cases where the speed/duplex update keeps failing over a longer period of time while the MII state is UP, a warning is printed every MII polling interval. To address these excessive warnings net_ratelimit() should be used. Printing a warning once would not be sufficient since the call to bond_update_speed_duplex() could recover to succeed and fail again later. In that case there would be no new indication what went wrong. Fixes: b5bf0f5b16b9c (bonding: correctly update link status during mii-commit phase) Signed-off-by: Andreas Born <futur.andy@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-13vxlan: change vxlan_[config_]validate() to use netlink_ext_ack for error ↵Girish Moodalbail
reporting The kernel log is not where users expect error messages for netlink requests; as we have extended acks now, we can replace pr_debug() with NL_SET_ERR_MSG_ATTR(). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-13tap: XDP supportJason Wang
This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-13tap: use build_skb() for small packetJason Wang
We use tun_alloc_skb() which calls sock_alloc_send_pskb() to allocate skb in the past. This socket based method is not suitable for high speed userspace like virtualization which usually: - ignore sk_sndbuf (INT_MAX) and expect to receive the packet as fast as possible - don't want to be block at sendmsg() To eliminate the above overheads, this patch tries to use build_skb() for small packet. We will do this only when the following conditions are all met: - TAP instead of TUN - sk_sndbuf is INT_MAX - caller don't want to be blocked - zerocopy is not used - packet size is smaller enough to use build_skb() Pktgen from guest to host shows ~11% improvement for rx pps of tap: Before: ~1.70Mpps After : ~1.88Mpps What's more important, this makes it possible to implement XDP for tap before creating skbs. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11liquidio: moved ptp_enable to octeon_device structureIntiyaz Basha
ptp_enable was a global static variable. Moved this global variable to octeon_device structure and removed extra device id check. Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11mlxsw: make mlxsw_config_profile constBhumika Goyal
Make these structures const as they only stored in the profile field of a mlxsw_driver structure, which is of type const. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11nfp: send control message when MAC representors are createdSimon Horman
The firmware expects a MAC_REPR control message when a MAC representor is created. The driver should expect a PORTMOD message to follow which will provide the link states of the physical port associated with the MAC representor. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11nfp: do not update MTU from BH in flower appSimon Horman
The Flower app may receive a request to update the MTU of a representor netdev upon receipt of a control message from the firmware. This requires the RTNL lock which needs to be taken outside of the packet processing path. As a handling of this correctly seems a little to invasive for a fix simply skip setting the MTU for now. Relevant backtrace: [ 1496.288489] BUG: scheduling while atomic: kworker/0:3/373/0x00000100 [ 1496.294911] dca syscopyarea sysfillrect sysimgblt fb_sys_fops ptp drm mxm_wmi ahci pps_core libahci i2c_algo_bit wmi [last unloaded: nfp] [ 1496.294918] CPU: 0 PID: 373 Comm: kworker/0:3 Tainted: G OE 4.13.0-rc3+ #3 [ 1496.294919] Hardware name: Supermicro X10DRi/X10DRi, BIOS 2.0 12/28/2015 [ 1496.294923] Workqueue: events work_for_cpu_fn [ 1496.294924] Call Trace: [ 1496.294927] <IRQ> [ 1496.294931] dump_stack+0x63/0x82 [ 1496.294935] __schedule_bug+0x54/0x70 [ 1496.294937] __schedule+0x62f/0x890 [ 1496.294941] ? intel_unmap_sg+0x90/0x90 [ 1496.294942] schedule+0x36/0x80 [ 1496.294943] schedule_preempt_disabled+0xe/0x10 [ 1496.294945] __mutex_lock.isra.2+0x445/0x4a0 [ 1496.294947] ? device_is_rmrr_locked+0x12/0x50 [ 1496.294950] ? kfree+0x162/0x170 [ 1496.294952] ? device_is_rmrr_locked+0x12/0x50 [ 1496.294953] ? iommu_should_identity_map+0x50/0xe0 [ 1496.294954] __mutex_lock_slowpath+0x13/0x20 [ 1496.294955] ? iommu_no_mapping+0x48/0xd0 [ 1496.294956] ? __mutex_lock_slowpath+0x13/0x20 [ 1496.294957] mutex_lock+0x2f/0x40 [ 1496.294960] rtnl_lock+0x15/0x20 [ 1496.294979] nfp_flower_cmsg_rx+0xc8/0x150 [nfp] [ 1496.294986] nfp_ctrl_poll+0x286/0x350 [nfp] [ 1496.294989] tasklet_action+0xf6/0x110 [ 1496.294992] __do_softirq+0xed/0x278 [ 1496.294993] irq_exit+0xb6/0xc0 [ 1496.294994] do_IRQ+0x4f/0xd0 [ 1496.294996] common_interrupt+0x89/0x89 Fixes: 948faa46c05b ("nfp: add support for control messages for flower app") Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11wan: dscc4: convert to plain DMA APIAlexey Khoroshilov
Make use the dma_*() interfaces rather than the pci_*() interfaces. Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11wan: dscc4: add checks for dma mapping errorsAlexey Khoroshilov
The driver does not check if mapping dma memory succeed. The patch adds the checks and failure handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net: stmmac: Use the right logging function in stmmac_mdio_registerRomain Perier
Currently, the function stmmac_mdio_register() is only used by stmmac_dvr_probe() from stmmac_main.c, in order to register the MDIO bus and probe information about the PHY. As this function is called before calling register_netdev(), all messages logged from stmmac_mdio_register are prefixed by "(unnamed net_device)". The goal of netdev_info or netdev_err is to dump useful infos about a net_device, when this data structure is partially initialized, there is no point for using these functions. This commit fixes the issue by replacing all netdev_*() by the corresponding dev_*() function for logging. The last netdev_info is replaced by phy_attached_info(), as a valid phydev can be used at this point. Signed-off-by: Romain Perier <romain.perier@collabora.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11fsl/fman: implement several errata workaroundsFlorinel Iordache
Implemented workarounds for the following dTSEC Erratum: A002, A004, A0012, A0014, A004839 on several operations that involve MAC CFG register changes: adjust link, rx pause frames, modify MAC address. Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> Acked-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11hns3pf: Fix some harmless copy and paste bugsDan Carpenter
These were copy and paste bugs, but I believe they are harmless. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11hns3pf: fix hns3_del_tunnel_port()Dan Carpenter
This function has a copy and paste bug so it accidentally calls the add function instead of the delete function. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net: stmmac: dwmac-rk: Add integrated PHY supprot for rk3328David Wu
There are two mac controllers in the rk3328, the one connects to external PHY, and the other one connects to integrated PHY. Like the mac of external PHY, the integrated PHY's mac also needs to configure the related mac registers at GRF. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net: stmmac: dwmac-rk: Add integrated PHY support for rk3228David Wu
There is only one mac controller in rk3228, which could connect to external PHY or integrated PHY, use the grf_com_mux bit15 to route external/integrated PHY. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net: stmmac: dwmac-rk: Add integrated PHY supportDavid Wu
To make integrated PHY work, need to configure the PHY clock, PHY cru reset and related registers. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net: stmmac: dwmac-rk: Remove unwanted code for rk3328_set_to_rmii()David Wu
This is wrong setting for rk3328_set_to_rmii(), so remove it. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net: phy: Add rockchip PHY driver supportDavid Wu
Support integrated ethernet PHY currently. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11forcedeth: replace init_timer_deferrable with setup_deferrable_timerZhu Yanjun
Replace init_timer_deferrable with setup_deferrable_timer to simplify the source code. Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11drivers: net: davinci_mdio: print bus frequencyMaxim Uvarov
Frequency can be adjusted in DT it make sense to print current used value on driver init. Signed-off-by: Max Uvarov <muvarov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11drivers: net: davinci_mdio: remove busy loop on wait user accessMaxim Uvarov
Polling 14 mdio devices on single mdio bus eats 30% of 1Ghz cpu time due to busy loop in wait(). Add small delay to relax cpu. Signed-off-by: Max Uvarov <muvarov@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11bonding: require speed/duplex only for 802.3ad, alb and tlbAndreas Born
The patch c4adfc822bf5 ("bonding: make speed, duplex setting consistent with link state") puts the link state to down if bond_update_speed_duplex() cannot retrieve speed and duplex settings. Assumably the patch was written with 802.3ad mode in mind which relies on link speed/duplex settings. For other modes like active-backup these settings are not required. Thus, only for these other modes, this patch reintroduces support for slaves that do not support reporting speed or duplex such as wireless devices. This fixes the regression reported in bug 196547 (https://bugzilla.kernel.org/show_bug.cgi?id=196547). Fixes: c4adfc822bf5 ("bonding: make speed, duplex setting consistent with link state") Signed-off-by: Andreas Born <futur.andy@googlemail.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11netvsc: keep track of some non-fatal overload conditionsstephen hemminger
Add ethtool statistics for case where send chimmeny buffer is exhausted and driver has to fall back to doing scatter/gather send. Also, add statistic for case where ring buffer is full and receive completions are delayed. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11netvsc: allow controlling send/recv buffer sizestephen hemminger
Control the size of the buffer areas via ethtool ring settings. They aren't really traditional hardware rings, but host API breaks receive and send buffer into chunks. The final size of the chunks are controlled by the host. The default value of send and receive buffer area for host DMA is much larger than it needs to be. Experimentation shows that 4M receive and 1M send is sufficient. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11netvsc: remove unnecessary check for NULL hdrstephen hemminger
The function init_page_array is always called with a valid pointer to RNDIS header. No check for NULL is needed. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11netvsc: remove unnecessary cast of void pointerstephen hemminger
Assignment to a typed pointer is sufficient in C. No cast is needed. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11netvsc: whitespace cleanupstephen hemminger
Fix some minor indentation issues. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11netvsc: no need to allocate send/receive on numa nodestephen hemminger
The send and receive buffers are both per-device (not per-channel). The associated NUMA node is a property of the CPU which is per-channel therefore it makes no sense to force the receive/send buffer to be allocated on a particular node (since it is a shared resource). Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11netvsc: check error return when restoring channels and mtustephen hemminger
If setting new values fails, and the attempt to restore original settings fails. Then log an error and leave device down. This should never happen, but if it does don't go down in flames. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11netvsc: propagate MAC address change to VF slavestephen hemminger
If VF is slaved to synthetic device, then any change to netvsc MAC address should be propagated to the slave device. If slave device doesn't support MAC address change then it should also be an error to attempt to change synthetic NIC MAC address. It also fixes the error unwind in the original code. If give a bad address, the old code would change the device MAC address anyway. Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11netvsc: don't signal host twice if emptystephen hemminger
When hv_pkt_iter_next() returns NULL, it has already called hv_pkt_iter_close(). Calling it twice can lead to extra host signal. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11netvsc: delay setup of VF devicestephen hemminger
When VF device is discovered, delay bring it automatically up in order to allow userspace to some simple changes (like renaming). Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11phylink: Fix an uninitialized variable bugDan Carpenter
"ret" isn't necessarily initialized here. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11liquidio: removed check for queue size alignmentIntiyaz Basha
There is no restriction on queue size alignment. Hence removing check for valid queue size. Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11liquidio: rx/tx queue cleanupIntiyaz Basha
When deleting a queue, clear its corresponding bit in the qmask, vfree its memory, clear out the pointer that's pointing to it, and decrement the queue count. Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <fmanlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net: sched: use newly added classid identity helpersJiri Pirko
Instead of checking handle, which does not have the inner class information and drivers wrongly assume clsact->egress as ingress, use the newly introduced classid identification helpers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11geneve: use netlink_ext_ack for error reporting in rtnl operationsGirish Moodalbail
Add extack error messages for failure paths while creating/modifying geneve devices. Once extack support is added to iproute2, more meaningful and helpful error messages will be displayed making it easy for users to discern what went wrong. Before: ======= $ ip link add gen1 address 0:1:2:3:4:5:6 type geneve id 200 \ remote 192.168.13.2 RTNETLINK answers: Invalid argument After: ====== $ ip link add gen1 address 0:1:2:3:4:5:6 type geneve id 200 \ remote 192.168.13.2 Error: Provided link layer address is not Ethernet Also, netdev_dbg() calls used to log errors associated with Netlink request have been removed. Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11Merge tag 'iwlwifi-next-for-kalle-2017-08-11' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Sencond batch of iwlwifi patches for 4.14 * Some more code moved to a new directory; * Fixes in LED handling; * Some FW API updates; * General fixes and cleanups here and there.
2017-08-11ath9k: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-11ath6kl: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Steve deRosier <derosier@gmail.com> Tested-by: Steve deRosier <derosier@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-11brcm80211: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Mainline had UFO fixes, but UFO is removed in net-next so we take the HEAD hunks. Minor context conflict in bcmsysport statistics bug fix. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-10Merge branches '32bit_lid' and 'irq_affinity' into k.o/merge-testDoug Ledford
Conflicts: drivers/infiniband/hw/mlx5/main.c - Both add new code include/rdma/ib_verbs.h - Both add new code Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-10mwifiex: uap: enable 11d based on userspace configruationXinming Hu
This patch check whether userspace beacon data include country ie, if so then download command to enable 11d setup in firmeare accordingly. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10zd1211rw: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10zd1201: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10rtl8192cu: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10rtl8xxxu: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-14 06:17:29 +0000