summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2017-08-08brcmfmac: set wpa_auth to WPA_AUTH_DISABLED in AP/OPEN security modeWright Feng
When setting wpa_auth to WPA_AUTH_NONE(1) in AP mode with WEP security, firmware will set privacy bit and add WPA OUI in VENDOR IE in beacon and probe response. The security type in softAP beacons confuse the supplicant in client side, and the user client will see [WPA-?] in supplicant scan result. So we set WPA_AUTH_DISABLED in softAP mode with OPEN security. Signed-off-by: Wright Feng <wright.feng@cypress.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08mwifiex: p2p: use separate device addressXinming Hu
Per below statement about p2p device address in WFA P2P spec $2.4.3: The P2P Device Address of a P2P Device shall be its globally administered MAC address, or its globally administered MAC address with the locally administered bit set. This patch follow above statement, using a separate device address for p2p interface Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08mwifiex: wrapper wps ie in pass through tlvXinming Hu
This patch wrapper wps ie in pass through tlv, so that firmware could parse correctly. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08mwifiex: Do not change bss_num in change_virtual_intfXinming Hu
Commit 4d7ab36f0c47 ("mwifiex: Do not change bss_type in change_virtual_intf") kept original bss_type unchanged. bss_num should keep the same style, in this way. Unique tuple (bss_type, bss_num) will be able to locate the right priv structure. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08mwifiex: replace netif_carrier_on/off by netif_device_attach/dettachGanapathi Bhat
Driver is doing netif_carrier_off during suspend, which will set the IFF_LOWER_UP flag to 0. As a result certain applications will think this as a real carrier down and behave accordingly. This will cause issues like loss of IP address, for example. To fix this use netif_device_dettach during suspend. Fixes: 0026b32d723e ('mwifiex: fix Tx timeout issue during suspend test') Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: RTS threshold configurationKarun Eagalapati
Provision is added for configuring RTS threshold by sending vap dynamic update frame to firmware. Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: buffer available interrupt handlingKarun Eagalapati
BUFFER_AVAILABLE interrupt is sent by firmware to indicate change in buffer status. We should check buffer status while handling this interrupt. Currently buffer status is checked only while dequeueing packets. This patch fixes a data traffic stuck problem observed occasionally. Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: buffer full check optimizationKarun Eagalapati
We get buffer full event from firmware whenever Tx queue is full Host should stop writing packets after this and resume after buffer free event. Buffer status checking is optimized for once in 4 times if BUFF_FULL condition is not set, otherwise once for every packet. Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: rename sdio_read_buffer_status_registerKarun Eagalapati
rsi_sdio_check_buffer_status would be the appropriate name for this function as we are checking hardware buffers availability status. Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: add support for U-APSD power saveKarun Eagalapati
This patch adds support for U-APSD power save. Configuration frame is downloaded to firmware with default settings and support is advertised to mac80211 Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: add support for legacy power saveKarun Eagalapati
This patch adds support for legacy power save. Necessary configuration frames are downloaded to firmware when power save is enabled/disabled Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: update set_antenna command framePavani Muthyala
TX command frame set_antenna is modified to use common descriptor structure. Also it's subframe type is set. Signed-off-by: Pavani Muthyala <pavani.muthyala@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: add support for rf-kill functionalityPavani Muthyala
This patch implements rfkill_poll handler. Also, necessary changes are done in interface up and down handler to support rfkill functionality. Signed-off-by: Pavani Muthyala <pavani.muthyala@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: fix uninitialized descriptor pointer issuePrameela Rani Garnepudi
This patch fixes the uninitialized descriptor pointer issue in function rsi_send_internal_mgmt_frame(). Descriptor should point to start of the skb data. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 9a629fafe7d8 ("rsi: immediate wakeup bit and priority for TX command packets") Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08ath9k: make ath_ps_ops structures as constBhumika Goyal
ath_ps_ops structures are only stored as a reference in the ps_ops field of a ath_common structure. This field is of type const, so make the structures as const. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-08wcn36xx: Introduce mutual exclusion of fw configurationBjorn Andersson
As the association status changes the driver needs to configure the hardware. This is done based on information in the "sta" acquired by ieee80211_find_sta(), which requires the caller to ensure that the "sta" is valid while its being used; generally by entering an rcu read section. But the operations acting on the "sta" has to communicate with the firmware and may therefor sleep, resulting in the following report: [ 31.418190] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238 [ 31.425919] in_atomic(): 0, irqs_disabled(): 0, pid: 34, name: kworker/u8:1 [ 31.434609] CPU: 0 PID: 34 Comm: kworker/u8:1 Tainted: G W 4.12.0-rc4-next-20170607+ #993 [ 31.441002] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) [ 31.450380] Workqueue: phy0 ieee80211_iface_work [ 31.457226] Call trace: [ 31.461830] [<ffffff8008088c58>] dump_backtrace+0x0/0x260 [ 31.464004] [<ffffff8008088f7c>] show_stack+0x14/0x20 [ 31.469557] [<ffffff8008392e70>] dump_stack+0x98/0xb8 [ 31.474592] [<ffffff80080e4330>] ___might_sleep+0xf0/0x118 [ 31.479626] [<ffffff80080e43a8>] __might_sleep+0x50/0x88 [ 31.485010] [<ffffff80088ff9a4>] mutex_lock+0x24/0x60 [ 31.490479] [<ffffff8008595c38>] wcn36xx_smd_set_link_st+0x30/0x130 [ 31.495428] [<ffffff8008591ed8>] wcn36xx_bss_info_changed+0x148/0x448 [ 31.501504] [<ffffff80088ab3c4>] ieee80211_bss_info_change_notify+0xbc/0x118 [ 31.508102] [<ffffff80088f841c>] ieee80211_assoc_success+0x664/0x7f8 [ 31.515220] [<ffffff80088e13d4>] ieee80211_rx_mgmt_assoc_resp+0x144/0x2d8 [ 31.521555] [<ffffff80088e1e20>] ieee80211_sta_rx_queued_mgmt+0x190/0x698 [ 31.528239] [<ffffff80088bc44c>] ieee80211_iface_work+0x234/0x368 [ 31.535011] [<ffffff80080d81ac>] process_one_work+0x1cc/0x340 [ 31.541086] [<ffffff80080d8368>] worker_thread+0x48/0x430 [ 31.546814] [<ffffff80080de448>] kthread+0x108/0x138 [ 31.552195] [<ffffff8008082ec0>] ret_from_fork+0x10/0x50 In order to ensure that the "sta" remains alive (and consistent) for the duration of bss_info_changed() mutual exclusion has to be ensured with sta_remove(). This is done by introducing a mutex to cover firmware configuration changes, which is made to also ensure mutual exclusion between other operations changing the state or configuration of the firmware. With this we can drop the rcu read lock. Cc: stable@vger.kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-08ath10k: switch to use new generic UUID APIAndy Shevchenko
There are new types and helpers that are supposed to be used in new code. As a preparation to get rid of legacy types and API functions do the conversion here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-08ath10k: fix memory leak in rx ring buffer allocationRakesh Pillai
The rx ring buffers are added to a hash table if firmware support full rx reorder. If the full rx reorder support flag is not set before allocating the rx ring buffers, none of the buffers are added to the hash table. There is a race condition between rx ring refill and rx buffer replenish from napi poll. The interrupts are enabled in hif start, before the rx ring is refilled during init. We replenish buffers from napi poll due to the interrupts which get enabled after hif start. Hence before the entire rx ring is refilled during the init, the napi poll replenishes a few buffers in steps of 100 buffers per attempt. During this rx ring replenish from napi poll, the rx reorder flag has not been set due to which the replenished buffers are not added to the hash table Set the rx full reorder support flag before we allocate the rx ring buffer to avoid the memory leak. Signed-off-by: Rakesh Pillai <pillair@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-08ath10k: ath10k_htt_rx_amsdu_allowed() use ath10k_dbg()Gabriel Craciunescu
Each time we get disconnected from AP we get flooded with messages like: ... ath10k_pci 0000:03:00.0: no channel configured; ignoring frame(s)! <until ratelimit kicks in> ath10k_warn: 155 callbacks suppressed ... Use ath10k_dbg() here too. Signed-off-by: Gabriel Craciunescu <nix.or.die@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-07net: vrf: Add extack messages for newlink failuresDavid Ahern
Add extack error messages for failure paths creating vrf devices. Once extack support is added to iproute2, we go from the unhelpful: $ ip li add foobar type vrf RTNETLINK answers: Invalid argument to: $ ip li add foobar type vrf Error: VRF table id is missing Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07qed: Fix a memory allocation failure test in 'qed_mcp_cmd_init()'Christophe Jaillet
We allocate 'p_info->mfw_mb_cur' and 'p_info->mfw_mb_shadow' but we check 'p_info->mfw_mb_addr' instead of 'p_info->mfw_mb_cur'. 'p_info->mfw_mb_addr' is never 0, because it is initiliazed a few lines above in 'qed_load_mcp_offsets()'. Update the test and check the result of the 2 'kzalloc()' instead. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: Move FDB dump implementation inside DSAArkadi Sharshevsky
>From all switchdev devices only DSA requires special FDB dump. This is due to lack of ability for syncing the hardware learned FDBs with the bridge. Due to this it is removed from switchdev and moved inside DSA. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: Remove support for MDB dump from DSA's driversArkadi Sharshevsky
This is done as a preparation before removing support for MDB dump from DSA core. The MDBs are synced with the bridge and thus there is no need for special dump operation support. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: Remove support for vlan dump from DSA's driversArkadi Sharshevsky
This is done as a preparation before removing support for vlan dump from DSA core. The vlans are synced with the bridge and thus there is no need for special dump operation support. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: Remove prepare phase for FDBArkadi Sharshevsky
The prepare phase for FDB add is unneeded because most of DSA devices can have failures during bus transactions (SPI, I2C, etc.), thus, the prepare phase cannot guarantee success of the commit stage. The support for learning FDB through notification chain, which will be introduced in the following patches, will provide the ability to notify back the bridge about successful offload. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: Change DSA slave FDB API to be switchdev independentArkadi Sharshevsky
In order to support FDB add/del to be on a notifier chain the slave API need to be changed to be switchdev independent. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07hamradio: baycom: make hdlcdrv_ops constBhumika Goyal
Make hdlcdrv_ops structures const as they are only passed to hdlcdrv_register function. The corresponding argument is of type const, so make the structures const. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: hns3: fix spelling mistake: "capabilty" -> "capability"Colin Ian King
Trivial fix to spelling mistake in dev_err error message and also split overly long line to avoid a checkpatch warning. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: lan9303: refactor lan9303_get_ethtool_statsEgil Hjelmeland
In lan9303_get_ethtool_stats: Get rid of 0x400 constant magic by using new lan9303_read_switch_reg() inside loop. Reduced scope of two variables. Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: lan9303: Rename lan9303_xxx_packet_processing()Egil Hjelmeland
The lan9303_enable_packet_processing, lan9303_disable_packet_processing functions operate on port, so the names should reflect that. And to align with lan9303_disable_processing(), rename: lan9303_enable_packet_processing -> lan9303_enable_processing_port lan9303_disable_packet_processing -> lan9303_disable_processing_port Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: lan9303: Simplify lan9303_xxx_packet_processing() usageEgil Hjelmeland
Simplify usage of lan9303_enable_packet_processing, lan9303_disable_packet_processing() Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: lan9303: define LAN9303_NUM_PORTS 3Egil Hjelmeland
Will be used instead of '3' in upcomming patches. Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: lan9303: Change lan9303_xxx_packet_processing() port param.Egil Hjelmeland
lan9303_enable_packet_processing, lan9303_disable_packet_processing() Pass port number (0,1,2) as parameter instead of port offset. Because other functions in the module pass port numbers. And to enable simplifications in following patch. Introduce lan9303_write_switch_port(). Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07ibmvnic: Report rx buffer return codes as netdev_dbgJohn Allen
Reporting any return code for a receive buffer as an "rx error" only produces alarming noise and the only values that have been observed to be used in this field are not error conditions. Change this to a netdev_dbg with a more descriptive message. Signed-off-by: John Allen <jallen@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07Merge tag 'wireless-drivers-next-for-davem-2017-08-07' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.14 The first wireless-drivers-next pull request for 4.14. I'm submitting this unusally late in the cycle as my vacation postponed this. But even if this is late there's not still that much new features, mostly cleanup or fixes. Major changes: ath10k * preparation for wcn3990 support iwlwifi * Reorganization of the code into separate directories continues qtnfmac * regulatory support updates * add get_channel, dump_survey and channel_switch cfg80211 handlers ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07hns3: fix unused function warningArnd Bergmann
Without CONFIG_PCI_IOV, we get a harmless warning about an unused function: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:2273:13: error: 'hclge_disable_sriov' defined but not used [-Werror=unused-function] The #ifdefs in this driver are obviously wrong, so this just removes them and uses an IS_ENABLED() check that does the same thing correctly in a more readable way. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07Merge tag 'mlx5-shared-2017-08-07' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Saeed Mahameed says: ==================== mlx5-shared-2017-08-07 This series includes some mlx5 updates for both net-next and rdma trees. From Saeed, Core driver updates to allow selectively building the driver with or without some large driver components, such as - E-Switch (Ethernet SRIOV support). - Multi-Physical Function Switch (MPFs) support. For that we split E-Switch and MPFs functionalities into separate files. From Erez, Delay mlx5_core events when mlx5 interfaces, namely mlx5_ib, registration is taking place and until it completes. From Rabie, Increase the maximum supported flow counters. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07asix: Fix small memory leak in ax88772_unbind()Dean Jenkins
When Ethernet frames span mulitple URBs, the netdev buffer memory pointed to by the asix_rx_fixup_info structure remains allocated during the time gap between the 2 executions of asix_rx_fixup_internal(). This means that if ax88772_unbind() is called within this time gap to free the memory of the parent private data structure then a memory leak of the part filled netdev buffer memory will occur. Therefore, create a new function asix_rx_fixup_common_free() to free the memory of the netdev buffer and add a call to asix_rx_fixup_common_free() from inside ax88772_unbind(). Consequently when an unbind occurs part way through receiving an Ethernet frame, the netdev buffer memory that is holding part of the received Ethernet frame will now be freed. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07asix: Ensure asix_rx_fixup_info members are all resetDean Jenkins
There is a risk that the members of the structure asix_rx_fixup_info become unsynchronised leading to the possibility of a malfunction. For example, rx->split_head was not being set to false after an error was detected so potentially could cause a malformed 32-bit Data header word to be formed. Therefore add function reset_asix_rx_fixup_info() to reset all the members of asix_rx_fixup_info so that future processing will start with known initial conditions. Also, if (skb->len != offset) becomes true then call reset_asix_rx_fixup_info() so that the processing of the next URB starts with known initial conditions. Without the call, the check does nothing which potentially could lead to a malfunction when the next URB is processed. In addition, for robustness, call reset_asix_rx_fixup_info() before every error path's "return 0". This ensures that the next URB is processed from known initial conditions. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07asix: Add rx->ax_skb = NULL after usbnet_skb_return()Dean Jenkins
In asix_rx_fixup_internal() there is a risk that rx->ax_skb gets reused after passing the Ethernet frame into the network stack via usbnet_skb_return(). The risks include: a) asynchronously freeing rx->ax_skb after passing the netdev buffer to the NAPI layer which might corrupt the backlog queue. b) erroneously reusing rx->ax_skb such as calling skb_put_data() multiple times which causes writing off the end of the netdev buffer. Therefore add a defensive rx->ax_skb = NULL after usbnet_skb_return() so that it is not possible to free rx->ax_skb or to apply skb_put_data() too many times. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: sched: get rid of struct tc_to_netdevJiri Pirko
Get rid of struct tc_to_netdev which is now just unnecessary container and rather pass per-type structures down to drivers directly. Along with that, consolidate the naming of per-type structure variables in cls_*. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: sched: change return value of ndo_setup_tc for driver supporting mqprio ↵Jiri Pirko
only Change the return value from -EINVAL to -EOPNOTSUPP. The rest of the drivers have it like that, so be aligned. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: sched: move prio into cls_commonJiri Pirko
prio is not cls_flower specific, but it is meaningful for all classifiers. Seems that only mlxsw cares about the value. Obviously, cls offload in other drivers is broken. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: sched: push cls related args into cls_common structureJiri Pirko
As ndo_setup_tc is generic offload op for whole tc subsystem, does not really make sense to have cls-specific args. So move them under cls_common structurure which is embedded in all cls structs. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07hns3pf: don't check handle during mqprio offloadJiri Pirko
Similar to the rest offloaders of mqprio, no need to check handle. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07nfp: change flows in apps that offload ndo_setup_tcJiri Pirko
Change the flows a bit in preparation of follow-up changes in ndo_setup_tc args. Also, change the error code to align with the rest of the drivers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07mlxsw: spectrum: rename cls arg in matchall processingJiri Pirko
To sync-up with the naming in the rest of the driver, rename the cls arg. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07mlxsw: spectrum: push cls_flower and cls_matchall setup_tc processing into ↵Jiri Pirko
separate functions Let mlxsw_sp_setup_tc be a splitter for specific setup_tc types and push out cls_flower and cls_matchall specific codes into separate functions. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07mlx5e_rep: push cls_flower setup_tc processing into a separate functionJiri Pirko
Let mlx5e_rep_setup_tc (former mlx5e_rep_ndo_setup_tc) be a splitter for specific setup_tc types and push out cls_flower specific code into a separate function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07mlx5e: push cls_flower and mqprio setup_tc processing into separate functionsJiri Pirko
Let mlx5e_setup_tc (former mlx5e_ndo_setup_tc) be a splitter for specific setup_tc types and push out cls_flower and mqprio specific codes into separate functions. Also change the return values so they are the same as in the rest of the drivers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-18 01:33:05 +0000