summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2011-02-23wl12xx: report invalid TX rate when returning non-TX-ed skbsArik Nemtsov
Report a TX rate idx of -1 and count 0 when returning untransmitted skbs to mac80211 using ieee80211_tx_status(). Otherwise mac80211 tries to use the returned (essentially garbage) status. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-23wl12xx: AP-mode - TX queue per link in ACArik Nemtsov
When operating in AP-mode we require a per link tx-queue. This allows us to implement HW assisted PS mode for links, as well as regulate per-link FW TX blocks consumption. Split each link into ACs to support future QoS for AP-mode. AC queues are emptied in priority and per-link queues are scheduled in a simple round-robin fashion. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-23wl12xx: AP-mode - fix race condition on sta connectionArik Nemtsov
If a sta starts transmitting immediately after authentication, sometimes the FW deauthenticates it. Fix this by marking the sta "in-connection" in FW before sending the autentication response. The "in-connection" entry is automatically removed when connection succeeds or after a timeout. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-23wl12xx: fix potential race condition with TX queue watermarkArik Nemtsov
Check the conditions for the high/low TX queue watermarks when the spin-lock is taken. This prevents race conditions as tx_queue_count and the flag checked are only modified when the spin-lock is taken. The following race was in mind: - Queues are almost full and wl1271_op_tx() will stop the queues, but it doesn't get the spin-lock yet. - (on another CPU) tx_work_locked() dequeues 15 skbs from this queue and tx_queue_count is updated to reflect this - wl1271_op_tx() does not check tx_queue_count after taking the spin-lock and incorrectly stops the queue. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-23wl12xx: always set mac_address when configuring ht capsEliad Peller
The mac_address should be set also when ht caps are disabled. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-23wl12xx: use standard ALIGN() macroEliad Peller
Use the standard ALIGN() macro instead of redefining similar macros. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-23Merge branch 'linus' into x86/platformThomas Gleixner
Reason: Import mainline device tree changes on which further patches depend on or conflict. Trivial conflict in: drivers/spi/pxa2xx_spi_pci.c Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-22Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-02-22Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-02-22Merge branch 'net/ax88796' of git://git.pengutronix.de/git/mkl/linux-2.6David S. Miller
2011-02-22be2net: use hba_port_num instead of port_numAjit Khaparde
Use hba_port_num for phy loopback and ethtool phy identification. From: Suresh R <suresh.reddy@emulex.com> Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22be2net: add code to display temperature of ASICAjit Khaparde
Add support to display temperature of ASIC via ethtool -S From: Somnath K <somnath.kotur@emulex.com> Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22be2net: fix to ignore transparent vlan ids wrongly indicated by NICAjit Khaparde
With transparent VLAN tagging, the ASIC wrongly indicates packets with VLAN ID. Strip them off in the driver. The VLAN Tag to be stripped will be given to the host as an async message. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22be2net: variable name changeAjit Khaparde
change occurances of stats_ioctl_sent to stats_cmd_sent Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22be2net: fixes in ethtool selftestAjit Khaparde
> add missing separator between items in ethtool self_test array > fix reporting of test resluts when link is down and when selftest command fails. From: Suresh R <suresh.reddy@emulex.com> Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22be2net: add new counters to display via ethtool statsAjit Khaparde
New counters: > jabber frame stats > red drop stats Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next-2.6
2011-02-22Merge branch 'fec' of git://git.pengutronix.de/git/ukl/linux-2.6David S. Miller
2011-02-22sfc: lower stack usage in efx_ethtool_self_testEric Dumazet
drivers/net/sfc/ethtool.c: In function ‘efx_ethtool_self_test’: drivers/net/sfc/ethtool.c:613: warning: the frame size of 1200 bytes is larger than 1024 bytes Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22sh: sh_eth: Add support ethtoolNobuhiro Iwamatsu
This commit supports following functions. - get_settings - set_settings - nway_reset - get_msglevel - set_msglevel - get_link - get_strings - get_ethtool_stats - get_sset_count About other function, the device does not support. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22wl12xx: declare support for IEEE80211_HW_REPORTS_TX_ACK_STATUSEliad Peller
The wl12xx fw supports ack status reporting for tx frames, so add the IEEE80211_HW_REPORTS_TX_ACK_STATUS flag to our supported features. Since we do the rate control in the fw, we'll probably want to adjust the STA_LOST_PKT_THRESHOLD heuristics in the future, to account for retransmissions as well. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-22wl12xx: fix MODULE_AUTHOR email addressLuciano Coelho
Change my old email address to the new one in MODULE_AUTHOR. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-22wl12xx: avoid blocking while holding rcu lock on bss info changeArik Nemtsov
Some blocking functions were called while holding the rcu lock for accessing STA information. This can lead to a deadlock. Save the required info beforehand and release the rcu without blocking. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-22wl12xx: fix identification of beacon packets (debug)Eliad Peller
for debugging purposes, wl12xx determines whether a rx packet is a beacon packet. however, it checks only the frame_control subtype without checking the actual packet type, which leads to false identification in some cases. use ieee80211_is_beacon instead. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-22wl12xx: update PLT initialization for new firmwareGery Kahn
In revision > 6.1.3.0.0 the firmware expects memory configuration command as part of boot. This was missing if driver boots in PLT mode. The patch adds the memory configuration command, which fixes PLT commands tx continuous and rx statistics. Signed-off-by: Gery Kahn <geryk@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-22wl12xx: change type from u8 to intDan Carpenter
ret is used to store int types. Using an u8 will break the error handling. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-21ath9k_hw: Fix power on resetSujith Manoharan
Commit "ath9k_hw: add an extra delay when reseting AR_RTC_RESET" added an extra udelay to the reset routine. As the required delay is already present, remove this. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rt2x00: Add support for RT5390 chipRA-Shiang Tu
Add new RT5390 chip support Signed-off-by: Shiang Tu <shiang_tu@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rt2x00: Add/Modify the GPIO register definitionShiang Tu
Revise/Add GPIO register related definitions Signed-off-by: Shiang Tu <shiang_tu@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rt2x00: Add/Modify protection related register definitionsShiang Tu
Make the definition of protection related registers more precisely Signed-off-by: Shiang Tu <shiang_tu@ralinktech.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rt2x00: Remove superfluos empty lineHelmut Schaa
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21Revert "rt2x00 : avoid timestamp for monitor injected frame."Helmut Schaa
This reverts commit e81e0aef32bfa7f593b14479b9c7eaa7196798ac "rt2x00 : avoid timestamp for monitor injected frame." as it breaks proper timestamp insertion into probe responses injected by hostapd for example. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Cc: Benoit PAPILLAULT <benoit.papillault@free.fr> Cc: Alban Browaeys <prahal@yahoo.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rt2x00: Minor optimization for devices with RTS/CTS offloadHelmut Schaa
Only devices that don't have RTS/CTS offload need to check for IEEE80211_TX_RC_USE_RTS_CTS and IEEE80211_TX_RC_USE_CTS_PROTECT. By swapping both conditions we keep the same number of needed conditionals for devices without RTS/CTS offload but save one conditional on devices with RTS/CTS offload. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rt2x00: Fix rt2800 txpower setting to correct valueRA-Jay Hung
TX_PWR_CFG_* setting need to consider below cases -compesate 20M/40M tx power delta for 2.4/5GHZ band -limit maximum EIRP tx power to power_level of regulatory requirement Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rt2x00: Add antenna setting for RT3070/RT3090/RT3390 with RX antenna ↵RA-Jay Hung
diversity support For RT3070/RT3090/RT3390 with RX antenna diversity support, we must select default antenna using gpio control way even if we do not turn on antenna diversity feature. Seperate the meaning of TX/RX chain and antenna. Some chips use 2x2 TX/RX chain but may have 3 RX antennas or 1x1 TX/RX chain but may have 2 RX antennas to do antenna diversity. Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: Remove obsolete/unused macrosLarry Finger
The original code has many macros that are no longer needed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: rtl8192ce: Fix endian warningsLarry Finger
Drivers rtlwifi, and rtl8192ce generate a large number of sparse warnings. This patch fixes most of them. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: Modify build system for rtl8192cuLarry Finger
Modify Kconfig and Makefile to build rtl8192cu. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: rtl8192cu: Add routine trxGeorge
Add routine rtlwifi/rtl8192cu/trx.c. This routine differs from the rtl8192ce file of the same name. Signed-off-by: George <george0505@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: rtl8192cu: Add routine tableGeorge
Add rtlwifi/rtl8192cu/table.c. These tables are different than the ones used in rtl8192ce. Signed-off-by: George <george0505@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: rtl8192cu: Add routine rfGeorge
Add rtlwifi/rtl8192cu/rf.c. This routine is distinct from the one in rtl8192ce with the same name. Signed-off-by: George <george0505@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: rtl8192cu: Add routine phyGeorge
Add the routine rtlwifi/rtl8192cu/phy.c. Most of the code is included from rtlwifi/rtl8192c/phy_common.c. Signed-off-by: George <george0505@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: rtl8192cu: Add routine macGeorge
Add the routine rtlwifi/rtl8192cu/hw.c. Signed-off-by: George <george0505@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: rtl8192cu: Add routine hwGeorge
Add the routine rtlwifi/rtl8192cu/hw.c. This one is distinct from the routine of the same name in rtl8192ce. Signed-off-by: George <george0505@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: rtl8192cu: Add routines dm, fw, led and swGeorge
Add the rtlwifi/rtl8192cu routines for dm.c, fw.c, led.c and sw.c. Where possible, these routines use the corresponding code in rtl8192ce. Signed-off-by: George <george0505@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: Move common parts of rtl8192ce/phy.cLarry Finger
Move common routines from rtlwifi/rtl8192ce/phy.c and .../rtl8192cu/phy.c into rtlwifi/rtl8192c/phy_common.c. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: Modify wifi.h for rtl8192cuLarry Finger
Further merge of parameters needed for rtl8192cu. In addition, some changes needed for rtl8192se and rtl8192de are included and additional Hungarian notation is removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: Add headers for rtl8187cuGeorge
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: George <george0505@realtek.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: Modify some rtl8192ce routines for merging rtl8192cuLarry Finger
Modify some rtl8192ce routines for merging with rtl8192cu. In addition, remove some usage of Hungarian notation. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: Make changes in rtlwifi/rtl8192ce/def.h to support rtl8192cuLarry Finger
This change modifies rtlwifi/rtl8192ce/def.h to handle rtl8192cu. In addition, a couple of routines needed for both drivers are converted to be inline. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-09-13 05:54:11 +0000