summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2011-02-11ixgbe: DCB, only reprogram HW if the FCoE priority is changedJohn Fastabend
If the FCoE priority is not changing do not set the RESET and APP_UPCHG bits. This causes unneeded HW resets and which can cause unneeded LLDP frames and negotiations. The current check is not sufficient because the FCoE priority can change twice during a negotiation which results in the bits being set. This occurs when the switch changes the priority or when the link is reset with switches that do not include the APP priority until after PFC has been negotiated. This results in set_app being called with the local APP priority. Then the negotiation completes and set_app is called again with the peer APP priority. The check fails so the device is reset and the above occurs again resulting in an endless loop of resets. By only resetting the device if the APP priority has really changed we short circuit the loop. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11igb: Enable PF side of SR-IOV support for i350 devicesCarolyn Wyborny
This patch adds full support for SR-IOV by enabling the PF side. VF side has already been committed. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11e1000e: return appropriate errors for 'ethtool -r'Bruce Allan
...when invoked while interface is not up or when auto-negotiation is disabled as done by other drivers. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11e1000e: use correct pointer when memcpy'ing a 2-dimensional arrayBruce Allan
*e1000_gstrings_test is not the same size as e1000_gstrings_test. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11e1000e: replace unbounded sprintf with snprintfBruce Allan
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-10tg3: Expand 5719 workaroundMatt Carlson
As a precautionary measure, expand the fix submitted in commit 4d163b75e979833979cc401ae433cb1d7743d57e entitled "tg3: Fix 5719 A0 tx completion bug" to apply to all 5719 revisions. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits) virtio_net: Add schedule check to napi_enable call x25: Do not reference freed memory. pch_can: fix tseg1/tseg2 setting issue isdn: hysdn: Kill (partially buggy) CVS regision log reporting. can: softing_cs needs slab.h pch_gbe: Fix the issue which a driver locks when rx offload is set by ethtool netfilter: nf_conntrack: set conntrack templates again if we return NF_REPEAT pch_can: fix module reload issue with MSI pch_can: fix rmmod issue pch_can: fix 800k comms issue net: Fix lockdep regression caused by initializing netdev queues too early. net/caif: Fix dangling list pointer in freed object on error. USB CDC NCM errata updates for cdc_ncm host driver CDC NCM errata updates for cdc.h ixgbe: update version string ixgbe: cleanup variable initialization ixgbe: limit VF access to network traffic ixgbe: fix for 82599 erratum on Header Splitting ixgbe: fix variable set but not used warnings by gcc 4.6 e1000: add support for Marvell Alaska M88E1118R PHY ...
2011-02-10virtio_net: Add schedule check to napi_enable callBruce Rogers
Under harsh testing conditions, including low memory, the guest would stop receiving packets. With this patch applied we no longer see any problems in the driver while performing these tests for extended periods of time. Make sure napi is scheduled subsequent to each napi_enable. Signed-off-by: Bruce Rogers <brogers@novell.com> Signed-off-by: Olaf Kirch <okir@suse.de> Cc: stable@kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-09pch_can: fix tseg1/tseg2 setting issueTomoya MORINAGA
Previous patch "[PATCH 1/3] pch_can: fix 800k comms issue" is wrong. I should have modified tseg1_min not tseg2_min. This patch reverts tseg2_min to 1 and set tseg1_min to 2. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-09iwlwifi: fix ack health for WiFi/BT combo devicesStanislaw Gruszka
Combo devices have TX statistics on different place, because struct statistics_rx_bt and struct statistics_rx have different size. User proper values on combo devices instead of random data. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09iwlwifi: cleanup iwl_good_ack_healthStanislaw Gruszka
Make ack health code easies to read. Compared to previous code, we do not print debug messages when expected_ack_cnt_delta == 0 and also do check against negative deltas. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09iwlwifi: cleanup iwl_recover_from_statisticsStanislaw Gruszka
No functional change, make recover from statistics code easies to read. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09ath9k: Remove redundant beacon_intervalSteve Brown
The variable appears in both ath_softc and ath_beacon_config. The struct ath_beacon_config is embedded in ath_softc. The redundant variable was added by commit id 57c4d7b4c4986037be51476b8e3025d5ba18d8b8. Signed-off-by: Steve Brown <sbrown@cortland.com> Reviewed-by: Mohammed Shafi <shafi.ath9k@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09ath9k: Add debug info for configuring power level.Ben Greear
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09ath9k: Print channel-type in chan-change dbg message.Ben Greear
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09can: softing_cs needs slab.hRandy Dunlap
From: Randy Dunlap <randy.dunlap@oracle.com> softing_cs.c uses kzalloc & kfree, so it needs to include linux/slab.h. drivers/net/can/softing/softing_cs.c:234: error: implicit declaration of function 'kfree' drivers/net/can/softing/softing_cs.c:271: error: implicit declaration of function 'kzalloc' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-09iwl3945: remove plcp checkStanislaw Gruszka
Patch fixes: https://bugzilla.redhat.com/show_bug.cgi?id=654599 Many users report very low speed problem on 3945 devices, this patch fixes problem, but only for some of them. For unknown reason, sometimes after hw scanning, device is not able to receive frames at high rate. Since plcp health check may request hw scan to "reset radio", performance problem start to be observable after update kernel to .35, where plcp check was introduced. Bug reporter confirmed that removing plcp check fixed problem for him. Reported-and-tested-by: SilvioTO <silviotoya@yahoo.it> Cc: stable@kernel.org # 2.6.35+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09pch_gbe: Fix the issue which a driver locks when rx offload is set by ethtoolToshiharu Okada
This driver will be in a deadlock, When the rx offload is set by ethtool. The pch_gbe_reinit_locked function was modified. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-08Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/e1000e/netdev.c
2011-02-08wl12xx: set supported_rates after associationEliad Peller
Instead of looking for supported_rates change on every tx packet, just extract the supported_rates after association completes (station only). Remove wl1271.sta_rate_set and WL1271_FLAG_STA_RATES_CHANGED which are not used anymore. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-08wl12xx: use the conf struct instead of macros for memory configurationEliad Peller
make the configuration management more flexible by using the conf struct, rather than predefined macros. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-08wl12xx: move to new firmware (6.1.3.50.49)Eliad Peller
This patch adds support for the new wl12xx firmware (Rev 6.1.3.50.49) Since this fw is not backward compatible with previous fw versions, a new fw (with different name) is being fetched. (the patch is big because it contains all the required fw api changes. splitting it into multiple patches will result in corrupted intermediate commits) Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-08wl12xx: mcp2.5 - add config_ps acxEliad Peller
mcp2.5 uses this acx to configure the fw only once, rather than passing the params in every enter psm command. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-08pch_can: fix module reload issue with MSITomoya
Currently, in case reload pch_can, pch_can not to be able to catch interrupt. The cause is bus-master is not set in pch_can. Thus, add enabling bus-master processing. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-08pch_can: fix rmmod issueTomoya
Currently, when rmmod pch_can, kernel failure occurs. The cause is pci_iounmap executed before pch_can_reset. Thus pci_iounmap moves after pch_can_reset. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-08pch_can: fix 800k comms issueTomoya
Currently, 800k comms fails since prop_seg set zero. (EG20T PCH CAN register of prop_seg must be set more than 1) To prevent prop_seg set to zero, change tseg2_min 1 to 2. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-08net: Kill NETEVENT_PMTU_UPDATE.David S. Miller
Nobody actually does anything in response to the event, so just kill it off. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-08USB CDC NCM errata updates for cdc_ncm host driverAlexey Orishko
Specification links: - CDC NCM errata link: http://www.usb.org/developers/devclass_docs/NCM10_012011.zip - CDC and WMC errata link: http://www.usb.org/developers/devclass_docs/CDC1.2_WMC1.1_012011.zip Changes: - driver updated to match cdc.h header with errata changes - added support for USB_CDC_SET_NTB_INPUT_SIZE control request with 8 byte length - fixes to comply with specification: send only control requests supported by device, set number of datagrams for IN direction, connection speed structure update, etc. - packet loss fixed for tx direction; misleading flag renamed. - adjusted hard_mtu value. Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-08Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-02-08Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-2.6
2011-02-08Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-02-08ixgbe: update version stringDon Skidmore
This will synchronize the version string with that of the latest source forge driver which shares its functionality. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-08ixgbe: cleanup variable initializationDon Skidmore
The ixgbe_fcoe_ddp_get function wasn't initializing one of its variables and this was producing compiler warnings. This patch cleans that up. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-08ixgbe: limit VF access to network trafficAlexander Duyck
This change fixes VM pool allocation issues based on MAC address filtering, as well as limits the scope of VF access to promiscuous mode. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-08ixgbe: fix for 82599 erratum on Header SplittingDon Skidmore
We have found a hardware erratum on 82599 hardware that can lead to unpredictable behavior when Header Splitting mode is enabled. So we are no longer enabling this feature on affected hardware. Please see the 82599 Specification Update for more information. CC: stable@kernel.org Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-08ixgbe: fix variable set but not used warnings by gcc 4.6Emil Tantilov
Caught with gcc 4.6 -Wunused-but-set-variable Remove unused napi_vectors variable. Fix the use of reset_bit in ixgbe_reset_hw_X540() Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-08e1000: add support for Marvell Alaska M88E1118R PHYFlorian Fainelli
This patch adds support for Marvell Alask M88E188R PHY chips. Support for other M88* PHYs is already there, so there is nothing more to add than its PHY id. CC: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-08e1000e: tx_timeout should not increment for non-hang eventsJesse Brandeburg
Currently the driver increments the tx_timeout counter (an error counter) when simply resetting the part with outstanding transmit work pending. This is an unnecessary count of an error, when all we should be doing is just resetting the part and discarding the transmits. With this change the only increment of tx_timeout is when the stack calls the watchdog reset function due to a true Tx timeout. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-08m68knommu: Remove dependencies on nonexistent M68KNOMMUGeert Uytterhoeven
M68KNOMMU is set nowhere. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-02-07ath9k: Update comments for not parsing DTIM periodMohammed Shafi Shajakhan
Add few comments for not parsing DTIM period from mac80211 Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-07ath5k: Fix fast channel switchingNick Kossifidis
Fast channel change fixes: a) Always set OFDM timings b) Don't re-activate PHY c) Enable only NF calibration, not AGC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-07iwlagn: Re-enable RF_KILL interrupt when downDon Fry
With commit 554d1d027b19265c4aa3f718b3126d2b86e09a08 only one RF_KILL interrupt will be seen by the driver when the interface is down. Re-enable the interrupt when it occurs to see all transitions. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-07enic: Clean up: Remove support for an older version of hardwareVasanthy Kolluri
Remove support for an older version (A1) of hardware Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-07enic: Bug Fix: Reorder firmware devcmds - CMD_INIT and CMD_IG_VLAN_REWRITE_MODEVasanthy Kolluri
Firmware requires CMD_IG_VLAN_REWRITE_MODE be issued before a CMD_INIT. Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-07enic: Bug Fix: Fix return values of enic_add/del_station_addr routinesVasanthy Kolluri
Fix enic_add/del_station_addr routines to return appropriate error code when an invalid address is added or deleted. Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-07enic: Clean up: Organize devcmd wrapper routinesVasanthy Kolluri
Organize the wrapper routines for firmware devcmds into a separate file. Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-07enic: Decouple mac address registration and deregistration from port profile ↵Roopa Prabhu
set operation This patch removes VM mac address registration and deregistration code during port profile set operation. We can delay mac address registration until enic_open. Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-06bnx2x: Proper netdev->ndo_set_rx_mode() implementation.Vladislav Zolotarov
Completed the bnx2x_set_rx_mode() to a proper netdev->ndo_set_rx_mode implementation: - Added a missing configuration of a unicast MAC addresses list. - Changed bp->dma_lock from being a mutex to a spinlock as long as it's taken under netdev->addr_list_lock now. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-06bnx2x: Duplication in promisc modeVladislav Zolotarov
Prevent packets duplication for frames targeting FCoE L2 ring: packets were arriving to stack from both L2 RSS and from FCoE L2 in a promiscuous mode. Configure FCoE L2 ring to DROP_ALL rx mode, when interface is configured to PROMISC, and to accept only unicast frames, when interface is configured to ALL_MULTI. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-06bnx2x: MTU for FCoE L2 ringVladislav Zolotarov
Always configure an FCoE L2 ring with a mini-jumbo MTU size (2500). To do that we had to move the rx_buf_size parameter from per function level to a per ring level. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-15 07:27:37 +0000