summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2011-02-03wl1251: enable beacon early termination while in power-saving modeDavid Gnedt
Port the beacon early termination feature from wl1251 driver version included in the Maemo Fremantle kernel. It is enabled when going to power-saving mode and disabled when leaving power-saving mode. Signed-off-by: David Gnedt <david.gnedt@davizone.at> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-03wl1251: fix 4-byte TX buffer alignmentDavid Gnedt
This implements TX buffer alignment for cloned or too small skb by copying and replacing the original skb. Recent changes in wireless-testing seems to make this really necessary. Signed-off-by: David Gnedt <david.gnedt@davizone.at> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-03wl1251: fix queue stopping/waking for TX pathDavid Gnedt
The queue stopping/waking functionality was broken in a way that could cause the TX to stall if the right circumstances are met. The problem was caused by tx_work, which is scheduled on each TX operation. If the firmware buffer is full, tx_work does nothing. In combinition with stopped queues or non-continues transfers, tx_work is never scheduled again. Moreover the low watermark introduced by 9df86e2e702c6d5547aced7f241addd2d698bb11 never takes effect because of some old code. Solve this by scheduling tx_work every time tx_queue is non-empty and firmware buffer is freed on tx_complete. This also solves a possible but unlikely case: If less frames than the high watermark are queued, but more than firmware buffer can hold. This results in queues staying awake but the only scheduled tx_work doesn't transfer all frames, so the remaining frames are stuck in the queue until more frames get queued and tx_work is scheduled again. Signed-off-by: David Gnedt <david.gnedt@davizone.at> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-03libertas: Prepare stuff for if_spi.c pm supportVasily Khoruzhick
To support suspend/resume in if_spi we need two things: - re-setup fw in lbs_resume(), because if_spi powercycles card; - don't touch hwaddr on second lbs_update_hw_spec() call for same reason; Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-03libertas_spi: Use workqueue in hw_host_to_cardVasily Khoruzhick
Use workqueue to perform SPI xfers, it's necessary to fix nasty "BUG: scheduling while atomic", because spu_write() calls spi_sync() and spi_sync() may sleep, but hw_host_to_card() callback can be called from atomic context. Remove kthread completely, workqueue now does its job. Restore intermediate buffers which were removed in commit 86c34fe89e9cad9e1ba4d1a8bbf98259035f4caf that introduced mentioned bug. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-03Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-02-03wireless, wl1251: Fix potential NULL pointer dereference in ↵Jesper Juhl
wl1251_op_bss_info_changed() In drivers/net/wireless/wl1251/main.c:wl1251_op_bss_info_changed() we make a call to ieee80211_beacon_get() which may return NULL, but we do not check the return value before dereferencing the pointer. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA: Update missed conversion of flush_scheduled_work() RDMA/ucma: Copy iWARP route information on queries RDMA/amso1100: Fix compile warnings RDMA/cxgb4: Set the correct device physical function for iWARP connections RDMA/cxgb4: Limit MAXBURST EQ context field to 256B IB/qib: Hold link for TX SERDES settings mlx4_core: Add ConnectX-3 device IDs
2011-02-02bna: use device model DMA APIIvan Vecera
Use DMA API as PCI equivalents will be deprecated. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-02atl1c: Add missing PCI device IDChuck Ebbert
Commit 8f574b35f22fbb9b5e5f1d11ad6b55b6f35f4533 ("atl1c: Add AR8151 v2 support and change L0s/L1 routine") added support for a new adapter but failed to add it to the PCI device table. Signed-Off-By: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-02iwlagn: overwrite EEPROM chain setting for 6250 devicesWey-Yi Guy
6250 2x2 devices have 2 tx chain and 2 rx chain. For some reason, the EEPROM contain incorrect information and indicate it only has single tx chain. overwrite it with .cfg parameter to make sure both chain 'A' and chain 'B' can be used for transmit and receive Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-02fix typos 'comamnd' -> 'command' in commentsJustin P. Mattock
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
2011-02-01be2net: remove netif_stop_queue being called before register_netdev.Ajit Khaparde
It is illegal to call netif_stop_queue before register_netdev. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-01be2net: fix a crash seen during insmod/rmmod testAjit Khaparde
While running insmod/rmood in a loop, an unnecessary netif_stop_queue causes the system to crash. Remove the netif_stop_queue call and netif_start_queue in the link status update path. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-01bnx2x: multicasts in NPAR modeVladislav Zolotarov
The chip was erroneously configured to accept all multicast frames in a normal (none-promisc) rx mode both on the RSS and on the FCoE L2 rings when in an NPAR mode. This caused packet duplication for every received multicast frame in this mode. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-01depca: Fix warningsAlan Cox
Replace the rather weird use of ++ with + 1 as the value is being assigned Signed-off-by: Alan Cox <alan@linux.intel.com>
2011-02-01Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-02-01vxge: Fix wrong boolean operatorStefan Weil
This error is reported by cppcheck: drivers/net/vxge/vxge-config.c:3693: warning: Mutual exclusion over || always evaluates to true. Did you intend to use && instead? It looks like cppcheck is correct, so fix this. No test was run. Cc: Ramkrishna Vepa <ramkrishna.vepa@exar.com> Cc: Sivakumar Subramani <sivakumar.subramani@exar.com> Cc: Sreenivasa Honnur <sreenivasa.honnur@exar.com> Cc: Jon Mason <jon.mason@exar.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Weil <weil@mail.berlios.de> Acked-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-01Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/wl12xx/spi.c
2011-02-01ath9k: Fix memory leak due to failed PAPRD framesMohammed Shafi Shajakhan
free the skb's when the Tx of PAPRD frames fails and also add a debug message indicating that. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-31enc28j60: Fix reading of transmit status vectorStefan Weil
This error was reported by cppcheck: drivers/net/enc28j60.c:815: error: Using sizeof for array given as function argument returns the size of pointer. The original code reads 4 or 8 bytes instead of TSV_SIZE (= 100) bytes. I just fixed the code, but did not run any tests. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31axnet_cs: reduce delay time at ei_rx_overrunKen Kawasaki
axnet_cs: mdelay of 10ms is too long at ei_rx_overrun. It should be reduced to 2ms. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x, cnic: Consolidate iSCSI/FCoE shared mem logic in bnx2xVladislav Zolotarov
Move all shared mem code to bnx2x to avoid code duplication. bnx2x now performs: - Read the FCoE and iSCSI max connection information. - Read the iSCSI and FCoE MACs from NPAR configuration in shmem. - Block the CNIC for the current function if there is neither FCoE nor iSCSI valid configuration by returning NULL from bnx2x_cnic_probe(). Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Update bnx2x version to 1.62.11-0Yaniv Rosner
Update bnx2x version to 1.62.11-0 Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Remove support for emulation/FPGAYaniv Rosner
Remove unneeded support for emulation/FPGA from the code Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Add CMS functionality for 848x3Yaniv Rosner
Add CMS(Common Mode Sense) functionality for 848x3 as this reduces power consumption and allows a better 10G link stability Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Add support for new PHY BCM84833Yaniv Rosner
Add support for new PHY BCM84833. This PHY is very similar to the BCM84823, only it has different register offset compared to the BCM84823, which needs to be handled correctly. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Enhance SFP+ module controlYaniv Rosner
Add flexible support to control various SFP+ module features either throughout MDIO registers or GPIO pins according to NVRAM configuration Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Add and change some net_dev messagesYaniv Rosner
Add and modify some net dev prints to improve error control Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Fix compilation warning messagesYaniv Rosner
Fix annoying compilation warning, mainly related to static declarations Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Set comments according to preferred Linux styleYaniv Rosner
This patch contains cosmetic changes only of restyling comments according to Linux coding standard, and add comment for get_emac_base function. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Rename CL45 macroYaniv Rosner
This patch contains cosmetic changes only of renaming CL45_WR_OVER_CL22 macro to CL22_WR_OVER_CL45 as it should be. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Fix line indentationYaniv Rosner
This patch contains cosmetic changes only to fix code alignment, and update copyright comment year Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31iiwlagn: remove unused parameterWey-Yi Guy
sco_cmd is not being used, remove it Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-01-31iwlagn: remove unsupported BT SCO commandWey-Yi Guy
During the period of BT coex changes, REPLY_BT_COEX_SCO host command is no longer needed to support SCO/eSCO type of traffic. delete it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-01-31iwlagn: use 2030 macro for 2030 devicesWey-Yi Guy
For 2030 series of devices, 2030 macro need to be used. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-01-31CAN: softing driver depends on IOMEMChuck Ebbert
Without this dependency the softing driver will be buildable on s390, where it fails. Signed-Off-By: Chuck Ebbert <cebbert@redhat.com> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31iwlwifi: fix beacon notification parsingJohannes Berg
The beacon notification changed between 4965 and agn because the embedded TX response changed, but iwlwifi was never updated to know about this. Update it now so the IBSS manager status will be tracked correctly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-01-31iwlwifi: use maximum aggregation sizeJohannes Berg
Use the values from the peer to set up the ucode for the right maximum number of subframes in an aggregate. Since the ucode only tracks this per station, use the minimum across all aggregation sessions with this peer. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-01-31iwlwifi: advertise max aggregate sizeJohannes Berg
Allow peers to size their reorder buffer more accurately by advertising that we'll never send aggregates longer than the default (31). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-01-31iwlwifi: support RSN IBSSJohannes Berg
In order to support RSN IBSS, we need to (ok actually maybe it's just easiest to) disable group key programming so that any group-addressed frames will be decrypted in software which handles the per-station keys for this easily. We could keep the encryption in the device, but that takes more work and seems unnecessary. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-01-31iwlwifi: always support idle mode for agn devicesWey-Yi Guy
For agn devices, always support idle mode which help power consumption in idle unassociated state. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-01-31iwlagn: add IQ inversion support for 2000 series devicesWey-Yi Guy
The I/Q swapping is extremely important and should be dealt with extra care. It will affects OFDM and CCK differently. For 6000/6005/6030 series devices, the I/Q were swapped, and for 2000 series devices, it is in non-swapped status (but its swapped with respected to 6000/6005/6030). so the CSR_GP_DRIVER_REG_BIT_RADIO_IQ_INVER register need to be set to support the correct behavior. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-01-31iwlagn: adjust rate tableWey-Yi Guy
Minor adjustment for rate scale table Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-01-31iwlwifi: check ucode loading error and restartWey-Yi Guy
Driver check alive message from ucode, if it is not ok, then need to restart the loading process. instead of checking multiple places for failure, only need to check in once place when receive alive message from uCode. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-01-31Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-01-31Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/wl12xx/spi.c
2011-01-31wl12xx: fix warning due to missing arg in ampdu_actionLuciano Coelho
Commit 0b01f030d38e00650e2db42da083d8647aad40a5 added a new argument to the ampdu_action operation. The ampdu_action operation in the wl12xx driver currently doesn't have that argument and this generates a warning. This happened during merging of the latest mac80211 patches with the wl12xx BA patches. CC [M] drivers/net/wireless/wl12xx/main.o drivers/net/wireless/wl12xx/main.c:3035: warning: initialization from incompatible pointer type The wl12xx driver doesn't need to do anything about the buf_size argument since the AMPDU TX is fully handled by the firmware. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-31iwlwifi: correct frequency settingsStanislaw Gruszka
After commit 59eb21a6504731fc16db4cf9463065dd61093e08 "cfg80211: Extend channel to frequency mapping for 802.11j" we use uninitialized sband->band when assign channel frequencies, what results that 5GHz channels have erroneous (zero) center_freq value. Patch fixes problem and simplifies code a bit. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-31rt2x00: Move TX/RX work into dedicated workqueueIvo van Doorn
The TX/RX work structures must be able to run independently of other workqueues. This is because mac80211 might use the flush() callback function from various context, which depends on the TX/RX work to complete while the main thread is blocked (until the the TX queues are empty). This should reduce the number of 'Queue %d failed to flush' warnings. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-09-16 15:34:45 +0000