summaryrefslogtreecommitdiff
path: root/drivers/soundwire
AgeCommit message (Collapse)Author
2025-01-29Merge tag 'soundwire-6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: - SoundWire multi lane support to use multiple lanes if supported - Stream handling of DEPREPARED state - AMD wake register programming for power off mode * tag 'soundwire-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: amd: clear wake enable register for power off mode soundwire: generic_bandwidth_allocation: count the bandwidth of active streams only SoundWire: pass stream to compute_params() soundwire: generic_bandwidth_allocation: add lane in sdw_group_params soundwire: generic_bandwidth_allocation: select data lane soundwire: generic_bandwidth_allocation: check required freq accurately soundwire: generic_bandwidth_allocation: correct clk_freq check in sdw_select_row_col Soundwire: generic_bandwidth_allocation: set frame shape on fly Soundwire: stream: program BUSCLOCK_SCALE Soundwire: add sdw_slave_get_scale_index helper soundwire: generic_bandwidth_allocation: skip DEPREPARED streams soundwire: stream: set DEPREPARED state earlier soundwire: add lane_used_bandwidth in struct sdw_bus soundwire: mipi_disco: read lane mapping properties from ACPI soundwire: add lane field in sdw_port_runtime soundwire: bus: Move irq mapping cleanup into devres
2024-12-23soundwire: amd: clear wake enable register for power off modeVijendar Mukunda
As per design for power off mode, clear the wake enable register during resume sequence. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20241203092144.4096986-1-Vijendar.Mukunda@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-23soundwire: generic_bandwidth_allocation: count the bandwidth of active ↵Bard Liao
streams only sdw_compute_group_params() should only count payload bandwidth of the active streams which is in the ENABLED and DISABLED state in the bus. And add the payload bandwidth of the stream that calls sdw_compute_group_params() in sdw_prepare_stream(). Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20241218080155.102405-15-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-23SoundWire: pass stream to compute_params()Bard Liao
The stream parameter will be used in the follow up commit. No function change. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20241218080155.102405-14-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-23soundwire: generic_bandwidth_allocation: add lane in sdw_group_paramsBard Liao
All active streams with the same parameters are grouped together and the params are stored in the sdw_group struct. We compute the required bandwidth for each group. However, each lane has individual bandwidth. Therefore, we should separate different lanes in different params groups. Add lane variable to separate params groups. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20241218080155.102405-13-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-23soundwire: generic_bandwidth_allocation: select data laneBard Liao
If a peripheral supports multi-lane, we can use data lane x to extend the bandwidth. The patch suggests to select data lane x where x > 0 when bandwidth is not enough on data lane 0. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20241218080155.102405-12-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-23soundwire: generic_bandwidth_allocation: check required freq accuratelyBard Liao
Currently, we check curr_dr_freq roughly by "if (curr_dr_freq <= bus->params.bandwidth)" in sdw_compute_bus_params() and check it accurately in sdw_select_row_col(). It works if we only support one freq. But, we need to check it accurately in sdw_select_row_col() to give it a chance to use a higher freq or use multi-lane. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20241218080155.102405-11-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-23soundwire: generic_bandwidth_allocation: correct clk_freq check in ↵Bard Liao
sdw_select_row_col The bits in Column 0 of Rows 0 to 47 are for control word and cannot be used for audio. In practice, entire Column 0 is skipped. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20241218080155.102405-10-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-23Soundwire: generic_bandwidth_allocation: set frame shape on flyBard Liao
We need to recalculate frame shape when sdw bus clock is changed. And need to make sure all Peripherals connected to the Manager support dynamic clock change. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20241218080155.102405-9-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-23Soundwire: stream: program BUSCLOCK_SCALEBard Liao
We need to program bus clock scale to adjust the bus clock if current bus clock doesn't fit the bandwidth. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20241218080155.102405-8-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-23Soundwire: add sdw_slave_get_scale_index helperBard Liao
Currently, we only set peripheral frequency when the peripheral is initialized. However, curr_dr_freq may change to get required bandwidth. For example, curr_dr_freq may increase from 4.8MHz to 9.6MHz when the 4th stream is opened. Add a helper to get the scale index so that we can get the scale index and program it. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20241218080155.102405-7-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-23soundwire: generic_bandwidth_allocation: skip DEPREPARED streamsPierre-Louis Bossart
We should not blindly walk through all the m_rt list, since it will have the side effect of accounting for deprepared streams. This behavior is the result of the split implementation where the dailink hw_free() handles the stream state change and the bit allocation, and the dai hw_free() modifies the m_rt list. The bit allocation ends-up using m_rt entries in zombie state, no longer relevant but still used. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20241218080155.102405-6-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-23soundwire: stream: set DEPREPARED state earlierPierre-Louis Bossart
The existing logic is problematic in that we deprepare all the ports, but still take into account the stream for bit allocation by just walking through the bus->m_rt list. This patch sets the state earlier, so that such DEPREPARED streams can be skipped in the bandwidth allocation (to be implemented in a follow-up patch). Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20241218080155.102405-5-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-23soundwire: mipi_disco: read lane mapping properties from ACPIBard Liao
The DisCo for SoundWire 2.0 added support for the 'mipi-sdw-lane-<n>-mapping' property. Co-developed-by: Chao Song <chao.song@linux.intel.com> Signed-off-by: Chao Song <chao.song@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20241218080155.102405-3-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-23soundwire: add lane field in sdw_port_runtimeBard Liao
Currently, lane_ctrl is always 0. Add a lane field in sdw_port_runtime to indicate the data lane of the data port. They are 0 by default. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20241218080155.102405-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-23soundwire: bus: Move irq mapping cleanup into devresCharles Keepax
Currently the IRQ mapping is disposed off in sdw_drv_remove(), however if the SoundWire device uses devres this can run before the actual device clean up, potentially clearing the mapping whilst it is still in use. Make this devres safe by also moving the sdw_irq_dispose_mapping into devres. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20241205113315.2266313-1-ckeepax@opensource.cirrus.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-02module: Convert symbol namespace to string literalPeter Zijlstra
Clean up the existing export namespace code along the same lines of commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") and for the same reason, it is not desired for the namespace argument to be a macro expansion itself. Scripted using git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file; do awk -i inplace ' /^#define EXPORT_SYMBOL_NS/ { gsub(/__stringify\(ns\)/, "ns"); print; next; } /^#define MODULE_IMPORT_NS/ { gsub(/__stringify\(ns\)/, "ns"); print; next; } /MODULE_IMPORT_NS/ { $0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g"); } /EXPORT_SYMBOL_NS/ { if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) { if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ && $0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ && $0 !~ /^my/) { getline line; gsub(/[[:space:]]*\\$/, ""); gsub(/[[:space:]]/, "", line); $0 = $0 " " line; } $0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/, "\\1(\\2, \"\\3\")", "g"); } } { print }' $file; done Requested-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc Acked-by: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-12-01Get rid of 'remove_new' relic from platform driver structLinus Torvalds
The continual trickle of small conversion patches is grating on me, and is really not helping. Just get rid of the 'remove_new' member function, which is just an alias for the plain 'remove', and had a comment to that effect: /* * .remove_new() is a relic from a prototype conversion of .remove(). * New drivers are supposed to implement .remove(). Once all drivers are * converted to not use .remove_new any more, it will be dropped. */ This was just a tree-wide 'sed' script that replaced '.remove_new' with '.remove', with some care taken to turn a subsequent tab into two tabs to make things line up. I did do some minimal manual whitespace adjustment for places that used spaces to line things up. Then I just removed the old (sic) .remove_new member function, and this is the end result. No more unnecessary conversion noise. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-11-27Merge tag 'soundwire-6.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: - structure optimization of few bus structures and header updates - support for 2.0 disco spec - amd driver updates for acp revision, refactoring code and support for acp6.3 - soft reset support for cadence driver * tag 'soundwire-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (24 commits) soundwire: Minor formatting fixups in sdw.h header soundwire: Update the includes on the sdw.h header soundwire: cadence: clear MCP BLOCK_WAKEUP in init soundwire: cadence: add soft-reset on startup soundwire: intel_auxdevice: add kernel parameter for mclk divider soundwire: mipi-disco: add support for DP0/DPn 'lane-list' property soundwire: mipi-disco: add new properties from 2.0 spec soundwire: mipi-disco: add comment on DP0-supported property soundwire: mipi-disco: add support for peripheral channelprepare timeout soundwire: mipi_disco: add support for clock-scales property soundwire: mipi-disco: add error handling for property array read soundwire: mipi-disco: remove DPn audio-modes soundwire: optimize sdw_dpn_prop soundwire: optimize sdw_dp0_prop soundwire: optimize sdw_slave_prop soundwire: optimize sdw_bus structure soundwire: optimize sdw_master_prop soundwire: optimize sdw_stream_runtime memory layout soundwire: mipi_disco: add MIPI-specific property_read_bool() helpers soundwire: Correct some typos in comments ...
2024-11-14ASoC: Merge up fixesMark Brown
Needed for new Intel board file changes.
2024-10-17soundwire: slave: lookup SDCA version and functionsPierre-Louis Bossart
Use SDCA helpers to get the basic information and store it in the slave context. The information will be optionally be used in codec drivers to register sub-devices for each Function. When platforms are not based on ACPI the helpers do absolutely nothing. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Acked-by: Vinod Koul <vkoul@kernel.org> Link: https://patch.msgid.link/20241016102333.294448-5-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-10-17ASoC/soundwire: remove sdw_slave_extended_idPierre-Louis Bossart
This structure is used to copy information from the 'sdw_slave' structures, it's better to create a flexible array of 'sdw_slave' pointers and directly access the information. This will also help access additional information stored in the 'sdw_slave' structure, such as an SDCA context. This patch does not add new functionality, it only modified how the information is retrieved. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://patch.msgid.link/20241016102333.294448-3-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-10-17soundwire: intel_ace2x: Send PDI stream number during prepareRanjani Sridharan
In the case of a prepare callback after an xrun or when the PCM is restarted after a call to snd_pcm_drain/snd_pcm_drop, avoid reprogramming the SHIM registers but send the PDI stream number so that the link DMA data can be set. This is needed for the case that the DMA data is cleared when the PCM is stopped and restarted without being closed. Link: https://github.com/thesofproject/sof/issues/9502 Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Acked-by: Vinod Koul <vkoul@kernel.org> All: stable@vger.kernel.org # 6.10.x 6.11.x Link: https://patch.msgid.link/20241016032910.14601-4-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-10-11ASoC/SoundWire: Intel: lnl: enable interrupts after first power-up/before ↵Pierre-Louis Bossart
last power-down The HDaudio mlink support makes it more logical to couple interrupt enabling/disabling with power-up/down sequences. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Acked-by: Vinod Koul <vkoul@kernel.org> Link: https://patch.msgid.link/20241007121241.30914-3-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-10-10soundwire: cadence: clear MCP BLOCK_WAKEUP in initPierre-Louis Bossart
Follow recommended programming flows. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20241003094830.119673-3-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-10soundwire: cadence: add soft-reset on startupPierre-Louis Bossart
Follow the recommended programming flows. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20241003094830.119673-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-10soundwire: intel_auxdevice: add kernel parameter for mclk dividerPierre-Louis Bossart
Add a kernel parameter to work-around discrepancies between hardware and platform firmware, it's not unusual to see e.g. 38.4MHz listed in _DSD properties as the SoundWire clock source, but the hardware may be based on a 19.2 MHz mclk source. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20241004021850.9758-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-03soundwire: mipi-disco: add support for DP0/DPn 'lane-list' propertyPierre-Louis Bossart
The SoundWire specification did not clearly require that ports could use all Lanes. Some SoundWire/SDCA peripheral adopters added restrictions on which lanes can be used by what port, and the DisCo for SoundWire 2.1 specification added a 'lane-list' property to model this hardware limitation. When not specified, the ports can use all Lanes. Otherwise, the 'lane-list' indicates which Lanes can be used, sorted by order of preference (most-preferred-first). This patch only reads the properties, the use of this property will come at a later time with multi-lane support. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20241003070650.62787-15-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-03soundwire: mipi-disco: add new properties from 2.0 specPierre-Louis Bossart
The DisCo for SoundWire 2.0 spec adds support for new 'mipi-sdw-sdca-interrupt-register-list' and 'mipi-sdw-commit-register-supported'. This patch only adds the definitions and property reads, but the use of these properties will come at some point in the future when needed. Note a slight conceptual disconnect between the MIPI DisCo definition of a boolean property and the Linux implementation. The latter only checks the presence of the property to set its value to 'true', whereas the MIPI definitions allow for a property with a 'false' value. This patch uses the new introduced mipi_device_property_read_bool() to handle it. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20241003070650.62787-14-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-03soundwire: mipi-disco: add comment on DP0-supported propertyPierre-Louis Bossart
The DisCo for SoundWire 2.0 spec adds support for a new property, but it's not very helpful. Add a comment to explain that it's intentionally ignored. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20241003070650.62787-13-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-03soundwire: mipi-disco: add support for peripheral channelprepare timeoutPierre-Louis Bossart
The DisCo for SoundWire 2.0 spec renamed the 'mipi-sdw-slave-channelprepare-timeout', add support for the new definition in backwards-compatible ways. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20241003070650.62787-12-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-03soundwire: mipi_disco: add support for clock-scales propertyPierre-Louis Bossart
The DisCo for SoundWire 2.0 spec adds support for the 'mipi-sdw-supported-clock-scales' property, which is just a rename. Add in a backwards-compatible manner. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20241003070650.62787-11-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-03soundwire: mipi-disco: add error handling for property array readPierre-Louis Bossart
The existing code assumes that there are no possible errors when using fwnode_property_read_u32_array(), because fwnode_property_count_u32() reads this array to determine its number of elements. We need to also protect the second read to be completely bullet-proof. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20241003070650.62787-10-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-03soundwire: mipi-disco: remove DPn audio-modesPierre-Louis Bossart
The concept of DPn audio-modes was never used by anyone, and was removed from the DisCo for SoundWire 2.0 specification. Remove the definitions and TODO. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20241003070650.62787-9-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-03soundwire: mipi_disco: add MIPI-specific property_read_bool() helpersPierre-Louis Bossart
The existing device/fwnode_property_read_bool() helpers only check if the property is present. The MIPI DisCo for SoundWire specification allows properties to be exposed with a value of 'false'. Using the standard helpers to retrieve the MIPI-defined properties causes all kinds of logical inversions leading to loss of functionality - such as jack detection in clock-stop mode broken when the device properties are read in Realtek codec drivers. This patch adds new MIPI/SoundWire helpers which first check if the property is present, and then return the actual value extracted from platform firmware. Modifying the default property handling was considered as a possible solution, but it could lead to other types of logical inversions breaking 'working' setups. Andy Shevchenko also pointed out that DT keeps values in the BE32 format, it's probably best to avoid endianness complications. The path of least resistance was chosen, with MIPI-specific helpers which can be tested and with no side effects outside of the SoundWire subsystem. Closes: https://github.com/thesofproject/linux/issues/5129 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20241003070650.62787-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-03soundwire: Correct some typos in commentsShen Lichuan
Fixed some confusing spelling errors that were currently identified, the details are as follows: -in the code comments: drivers/soundwire/bus.c:115: enumuration==> enumeration drivers/soundwire/qcom.c:1176: wil ==> will drivers/soundwire/sysfs_slave.c:218: highligh ==> highlight Signed-off-by: Shen Lichuan <shenlichuan@vivo.com> Link: https://lore.kernel.org/r/20240925081134.10248-1-shenlichuan@vivo.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-03soundwire: amd: refactor existing code for acp 6.3 platformVijendar Mukunda
Refactor existing code by adding acp pci revision id coditional checks for ACP 6.3 platform. Rename the macros and structure names with ACP63 tag. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20240924081846.1834612-3-Vijendar.Mukunda@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-03soundwire: amd: pass acp pci revision id as resource dataVijendar Mukunda
Pass ACP pci revision id as resource data and store it in amd SoundWire manager private data structure. This field will be used to differentiate ACP variants. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20240924081846.1834612-2-Vijendar.Mukunda@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-09-23Merge tag 'soundwire-6.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: - bus cleanup for warnings and probe deferral errors suppression - cadence recheck for status with a delayed work - intel interrupt rework on reset exit * tag 'soundwire-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: intel_bus_common: enable interrupts before exiting reset soundwire: cadence: re-check Peripheral status with delayed_work soundwire: bus: clean up probe warnings soundwire: bus: drop unused driver name field soundwire: bus: suppress probe deferral errors
2024-08-19soundwire: intel: add probe-time check on link idPierre-Louis Bossart
In older platforms, the number of links was constant and hard-coded to 4. Newer platforms can have varying number of links, so we need to add a probe-time check to make sure the ACPI-reported information with _DSD properties is aligned with hardware capabilities reported in the SoundWire LCAP register. Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240819005548.5867-3-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-08-18soundwire: intel_bus_common: enable interrupts before exiting resetPierre-Louis Bossart
The existing code enables the Cadence IP interrupts after the bus reset sequence. The problem with this sequence is that it might be pre-empted, giving SoundWire devices time to sync and report as ATTACHED before the interrupts are enabled. In that case, the Cadence IP will not detect a state change and will not throw an interrupt to proceed with the enumeration of a Device0. In our overnight stress tests, we observed that a slight sub-millisecond delay in enabling interrupts after the reset was correlated with detection failures. This problem is more prevalent on the LunarLake silicon, likely due to SOC integration changes, but it was observed on earlier generations as well. This patch reverts the sequence, with the interrupts enabled before performing the bus reset. This removes the race condition and makes sure the Cadence IP is able to detect the presence of a Device0 in all cases. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20240805115003.88035-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-18soundwire: cadence: re-check Peripheral status with delayed_workPierre-Louis Bossart
The SoundWire peripheral enumeration is entirely based on interrupts, more specifically sticky bits tracking state changes. This patch adds a defensive programming check on the actual status reported in PING frames. If for some reason an interrupt was lost or delayed, the delayed work would detect a peripheral change of status after the bus starts. The 100ms defined for the delay is not completely arbitrary, if a Peripheral didn't join the bus within that delay then probably the hardware link is broken, and conversely if the detection didn't happen because of software issues the 100ms is still acceptable in terms of user experience. The overhead of the one-shot workqueue is minimal, and the mutual exclusion ensures that the interrupt and delayed work cannot update the status concurrently. Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20240805114921.88007-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-07-31soundwire: bus: clean up probe warningsJohan Hovold
Clean up the probe warning messages by using a common succinct and greppable format (e.g. without __func__ and with a space after ':'). Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240712140801.24267-4-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-07-31soundwire: bus: drop unused driver name fieldJohan Hovold
The soundwire driver name field is not currently used by any driver (and even appears to never have been used) so drop it. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20240712140801.24267-3-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-07-31soundwire: bus: suppress probe deferral errorsJohan Hovold
Soundwire driver probe errors are currently being logged both by the bus code and driver core: wsa884x-codec sdw:4:0:0217:0204:00:0: Probe of wsa884x-codec failed: -12 wsa884x-codec sdw:4:0:0217:0204:00:0: probe with driver wsa884x-codec failed with error -12 Drop the redundant bus error message, which is also incorrectly being logged on probe deferral: wsa884x-codec sdw:4:0:0217:0204:00:0: Probe of wsa884x-codec failed: -517 Note that no soundwire driver uses the driver struct name field, which will be removed by a follow-on change. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20240712140801.24267-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-07-25Merge tag 'driver-core-6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big set of driver core changes for 6.11-rc1. Lots of stuff in here, with not a huge diffstat, but apis are evolving which required lots of files to be touched. Highlights of the changes in here are: - platform remove callback api final fixups (Uwe took many releases to get here, finally!) - Rust bindings for basic firmware apis and initial driver-core interactions. It's not all that useful for a "write a whole driver in rust" type of thing, but the firmware bindings do help out the phy rust drivers, and the driver core bindings give a solid base on which others can start their work. There is still a long way to go here before we have a multitude of rust drivers being added, but it's a great first step. - driver core const api changes. This reached across all bus types, and there are some fix-ups for some not-common bus types that linux-next and 0-day testing shook out. This work is being done to help make the rust bindings more safe, as well as the C code, moving toward the end-goal of allowing us to put driver structures into read-only memory. We aren't there yet, but are getting closer. - minor devres cleanups and fixes found by code inspection - arch_topology minor changes - other minor driver core cleanups All of these have been in linux-next for a very long time with no reported problems" * tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits) ARM: sa1100: make match function take a const pointer sysfs/cpu: Make crash_hotplug attribute world-readable dio: Have dio_bus_match() callback take a const * zorro: make match function take a const pointer driver core: module: make module_[add|remove]_driver take a const * driver core: make driver_find_device() take a const * driver core: make driver_[create|remove]_file take a const * firmware_loader: fix soundness issue in `request_internal` firmware_loader: annotate doctests as `no_run` devres: Correct code style for functions that return a pointer type devres: Initialize an uninitialized struct member devres: Fix memory leakage caused by driver API devm_free_percpu() devres: Fix devm_krealloc() wasting memory driver core: platform: Switch to use kmemdup_array() driver core: have match() callback in struct bus_type take a const * MAINTAINERS: add Rust device abstractions to DRIVER CORE device: rust: improve safety comments MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER firmware: rust: improve safety comments ...
2024-07-24Merge tag 'soundwire-6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: - Simplification across subsystem using cleanup.h - Support for debugfs to read/write commands - Few Intel and Qualcomm driver updates * tag 'soundwire-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: debugfs: simplify with cleanup.h soundwire: cadence: simplify with cleanup.h soundwire: intel_ace2x: simplify with cleanup.h soundwire: intel_ace2x: simplify return path in hw_params soundwire: intel: simplify with cleanup.h soundwire: intel: simplify return path in hw_params soundwire: amd_init: simplify with cleanup.h soundwire: amd: simplify with cleanup.h soundwire: amd: simplify return path in hw_params soundwire: intel_auxdevice: start the bus at default frequency soundwire: intel_auxdevice: add cs42l43 codec to wake_capable_list drivers:soundwire: qcom: cleanup port maask calculations soundwire: bus: simplify by using local slave->prop soundwire: generic_bandwidth_allocation: change port_bo parameter to pointer soundwire: Intel: clarify Copyright information soundwire: intel_ace2.x: add AC timing extensions for PantherLake soundwire: bus: add stream refcount soundwire: debugfs: add interface to read/write commands
2024-07-19Merge tag 'sound-6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "Lots of changes in this cycle, but mostly for cleanups and refactoring. Significant amount of changes are about DT schema conversions for ASoC at this time while we see other usual suspects, too. Some highlights below: Core: - Re-introduction of PCM sync ID support API - MIDI2 time-base extension in ALSA sequencer API ASoC: - Syncing of features between simple-audio-card and the two audio-graph cards - Support for specifying the order of operations for components within cards to allow quirking for unusual systems - Lots of DT schema conversions - Continued SOF/Intel updates for topology, SoundWire, IPC3/4 - New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5 and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments PCM5242 HD-audio: - More quirks, Intel PantherLake support, senarytech codec support - Refactoring of Cirrus codec component-binding Others: - ALSA control kselftest improvements, and fixes for input value checks in various drivers" * tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (349 commits) kselftest/alsa: Log the PCM ID in pcm-test kselftest/alsa: Use card name rather than number in test names ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360 ALSA: hda/tas2781: Add new quirk for Lenovo Hera2 Laptop ALSA: seq: ump: Skip useless ports for static blocks ALSA: pcm_dmaengine: Don't synchronize DMA channel when DMA is paused ALSA: usb: Use BIT() for bit values ALSA: usb: Fix UBSAN warning in parse_audio_unit() ALSA: hda/realtek: Enable headset mic on Positivo SU C1400 ASoC: tas2781: Add new Kontrol to set tas2563 digital Volume ASoC: codecs: wcd937x: Remove separate handling for vdd-buck supply ASoC: codecs: wcd937x: Remove the string compare in MIC BIAS widget settings ASoC: codecs: wcd937x-sdw: Fix Unbalanced pm_runtime_enable ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschema ASoC: cs530x: Remove bclk from private structure ASoC: cs530x: Calculate proper bclk rate using TDM ASoC: dt-bindings: cirrus,cs4270: Convert to dtschema firmware: cs_dsp: Rename fw_ver to wmfw_ver firmware: cs_dsp: Clarify wmfw format version log message firmware: cs_dsp: Make wmfw and bin filename arguments const char * ...
2024-07-09soundwire: debugfs: simplify with cleanup.hKrzysztof Kozlowski
Allocate the memory with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240703-soundwire-cleanup-h-v1-9-24fa0dbb948f@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-07-09soundwire: cadence: simplify with cleanup.hKrzysztof Kozlowski
Allocate the memory with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240703-soundwire-cleanup-h-v1-8-24fa0dbb948f@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-24 21:16:05 +0000