summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/sh-sci.c
AgeCommit message (Collapse)Author
2015-06-23sh-sci: Get register size from platform deviceYoshinori Sato
There is much SCI of SoC having within, and the register size is also different in everyone. So get from platform device. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Acked-by: by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2015-06-23sh-sci: Add h8300 SCIYoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-05-10serial: sh-sci: Remove obsolete comment about overrun detectionGeert Uytterhoeven
The code it refers to was removed in commit b545e4f40613be70 ("serial: sh-sci: Compute overrun_bit without using baud rate algo"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-10serial: sh-sci: Don't set SCLSR bits in the SCxSR error maskGeert Uytterhoeven
error_mask is the union of all error indicating bits in the SCxSR register, while overrun_mask may apply to a different register (SCLSR), depending on the SCI variant. Hence overrun_mask should only be ORed into error_mask if it applies to the SCxSR register. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-10serial: sh-sci: Use the correct register for overrun checksGeert Uytterhoeven
The various SCI implementations use 3 different methods to signal overrun errors: - Bit SCI_ORER in register SCxSR on SCI, - Bit SCIFA_ORER in register SCxSR on SCIFA and SCIFB, and SCIF on SH7705/SH7720/SH7721, - Bit SCLSR_ORER in (optional!) register SCLSR on (H)SCIF. However: 1. sci_handle_fifo_overrun() a. handles (H)SCIF and SCIFA/SCIFB only, b. treats SCIF on SH7705/SH7720/SH7721 incorrectly, 2. sci_mpxed_interrupt() a. treats SCIF on SH7705/SH7720/SH7721 incorrectly, b. ignores that not all SCIFs have the SCLSR register, causing "Invalid register access" WARN()ings. To fix the above: 1. Determine and store the correct register enum during initialization, 2. Replace the duplicated buggy switch statements by using the stored register enum, 3. Add the missing existence check to sci_mpxed_interrupt(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-10serial: sh-sci: Replace hardcoded overrun bit valuesGeert Uytterhoeven
Add the missing overrun bit definition for (H)SCIF. Replace overrun_bit by overrun_mask, so we can use the existing defines instead of hardcoded values. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-10serial: sh-sci: Add SCIFA/B SCPCR register definitionsGeert Uytterhoeven
Add the register definitions for the Serial Port Control and Data Registers on SCIFA/SCIFB, which are needed for RTS/CTS pin control. Extracted from patches by Magnus Damm <damm+renesas@opensource.se>. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26serial: sh-sci: Update calculation of timeout for DMANobuhiro Iwamatsu
The current calculation method in the case of 9600bps, rounding error occurs has become setting that occur timeout faster than the required time. When we use 9600bps, 32byte buffer, 10 bit (CS8) and 100 HZ, it becomes 3 jiffies (30msec). In fact it is necessary 33msec. This updates to the calculation that are not actually less than the value set by the rounding error. Also, this is nothing will be calculated value when there is no load. If there are a lot of case load, overrun error will occur immediately. This is by the buffer size to be calculated twice the DMA buffer, and add the change of setting a sufficient time-out value. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26serial: sh-sci: Add overrun handling of SCIFA and SCIFBNobuhiro Iwamatsu
SCIFA and SCIFB can detect the overrun, but it does not support. This adds overrun handling of SCIFA and SCIFB. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-02serial: sh-sci: Fix R-Car SCIF and HSCIF overrun handlingHisashi Nakamura
When fifo overrun happened, the interrupt status refers to SCLSR register in R-Car SCIF and HSCIF. Thus, overrun handling takes SCLSR register into account. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-02serial: sh-sci: Use dev_dbg() to log an error messageYoshihiro Kaneko
Since the driver cannot return from overrun error if characters are output during overrun process, use dev_dbg() instead of dev_notice() to log the error message of overrun in syslog. Based on a patch by Hisashi Nakamura. Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-02sh-sci: extend PM methodsSergei Shtylyov
In order to make it possible to restore from hibernation not only in Linux but also in e.g. U-Boot, we have to use sci_{suspend|remove}() for the PM {freeze| thaw|restore}() methods. It's handy to achieve this by using SIMPLE_DEV_PM_OPS() macro, however we have to annotate sci_{suspend|remove}() with '__maybe_unused' in order to avoid compilation warnings when CONFIG_PM_SLEEP is undefined. Based on orignal patch by Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-11-25serial: sh-sci: Change checking for error rate of HSCIFNobuhiro Iwamatsu
This changes negative values of error rate to be checked, because these values are valid as error rate. And this changes in the process of adopting a value close to 0. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-20tty: serial: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-15serial: sh-sci: use dmaengine_terminate_all() APIVinod Koul
The drivers should use dmaengine_terminate_all() API instead of accessing the device_control which will be deprecated soon Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-17serial: sh-sci: Add calculation recive margin for HSCIFNobuhiro Iwamatsu
When the error of the same bit rate is detected, we will need to select the recive margin is large. Current code holds the minimum error, it does not have to check the recive margin. This adds this calculation. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17serial: sh-sci: Fix range check of bit-rate for HSCIFNobuhiro Iwamatsu
If bit-rate calculation result of HSCIF is expect 255 from 0, driver does not calculate error bit. However, we need to round the value to calculate error bit in the case of negative value. This rounds the value of bit-rate using clamp(), and bit-rate is the case of negative value, it enables the calculation of the error bit. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17serial: sh-sci: Updated calculation of bit error rate and bit rateNobuhiro Iwamatsu
Currently, the decimal point is discarded calculation of BRR. Therefore, it can not calculate a value close to the correct value. This patch fixes this problem by using DIV_ROUND_CLOSEST. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09serial: treewide: Remove empty implementations of enable_ms()Alexander Shiyan
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-01Merge tag 'tty-3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver update from Greg KH: "Here's the big tty/serial driver update for 3.15-rc1. Nothing major, a number of serial driver updates and a few tty core fixes as well. All have been in linux-next for a while" * tag 'tty-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits) tty/serial: omap: empty the RX FIFO at the end of half-duplex TX tty/serial: omap: fix RX interrupt enable/disable in half-duplex TX serial: sh-sci: Neaten dev_<level> uses serial: sh-sci: Replace hardcoded 3 by UART_PM_STATE_OFF serial: sh-sci: Add more register documentation serial: sh-sci: Remove useless casts serial: sh-sci: Replace printk() by pr_*() serial_core: Avoid NULL pointer dereference in uart_close() serial_core: Get a reference for port->tty in uart_remove_one_port() serial: clps711x: Give a chance to perform useful tasks during wait loop serial_core: Grammar s/ports/port's/ serial_core: Spelling s/contro/control/ serial: efm32: properly namespace location property serial: max310x: Add missing #include <linux/uaccess.h> synclink: fix info leak in ioctl serial: 8250: Clean up the locking for -rt serial: 8250_pci: change BayTrail default uartclk serial: 8250_pci: more BayTrail error-free bauds serial: sh-sci: Add missing call to uart_remove_one_port() in failure path serial_core: Unregister console in uart_remove_one_port() ...
2014-03-19cpufreq: remove unused notifier: CPUFREQ_{SUSPENDCHANGE|RESUMECHANGE}Viresh Kumar
Two cpufreq notifiers CPUFREQ_RESUMECHANGE and CPUFREQ_SUSPENDCHANGE have not been used for some time, so remove them to clean up code a bit. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> [rjw: Changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-17serial: sh-sci: Neaten dev_<level> usesJoe Perches
Add missing newlines and coalesce formats. Realign arguments. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17serial: sh-sci: Replace hardcoded 3 by UART_PM_STATE_OFFGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17serial: sh-sci: Add more register documentationGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17serial: sh-sci: Remove useless castsGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17serial: sh-sci: Replace printk() by pr_*()Geert Uytterhoeven
Make banner const while we're at it Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28serial: sh-sci: Add missing call to uart_remove_one_port() in failure pathGeert Uytterhoeven
If cpufreq_register_notifier() fails, we have to remove the port added by sci_probe_single(), which is not done by sci_cleanup_single(). Else the serial port stays active from the point of view of the serial subsystem, and it may crash when userspace getty is started, or when the loadable driver module is unloaded. This was introduced by commit 6dae14216c85eea13db7b12c469475c5d30e5499 ("serial: sh-sci: Fix probe error paths"). Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: sh-sci: Fix cast warningJingoo Han
Fix the following compile warning about cast to pointer from integer of different size. drivers/tty/serial/sh-sci.c:2021:19: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-24serial: sh-sci: Add OF supportBastian Hecht
Extend the driver to with support for SCIx device tree bindings. A minimal set of features is supported, additional properties can be added later should the need to describe more device features arise. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Remove platform data mapbase and irqs fieldsLaurent Pinchart
The fields are not used anymore by board files, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Remove platform data scbrr_algo_id fieldLaurent Pinchart
The field isn't set by any board, remote it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Rework baud rate calculationLaurent Pinchart
Computing the baud rate register value requires knowledge of the hardware sampling rate. This information is currently encoded in a baud rate calculation algorithm ID passed through platform data. However, it can be derived from the port type directly in most cases. Compute the sampling rate internally in the driver if the baud rate calculation algorithm ID isn't specified, and allow platforms to override the sampling rate through platform data in special cases (this is only required for SCIFA ports on sh7723 and sh7724, the reason needs to be investigated). Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Compute overrun_bit without using baud rate algoLaurent Pinchart
The overrun bit index is a property of the hardware. It's currently computed based on a different and unrelated hardware property, the baud rate calculation algorithm. Compute it using hardware identification information only. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Remove unused GPIO request codeLaurent Pinchart
The driver requests at initialization time GPIOs passed through platform data. No platform makes use of this feature, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Move overrun_bit and error_mask fields out of pdataLaurent Pinchart
None of the fields is ever set by board code, and both of them are set in the driver at probe time. Move them out of struct plat_sci_port to struct sci_port. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Support resources passed through platform resourcesLaurent Pinchart
Memory and IRQ resources are currently passed to the driver through platform data. Support passing them through the standard platform resources mechanism instead. This deprecates platform data resources. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Don't check IRQ in verify port operationLaurent Pinchart
The IRQ number can't be modified by the user as the port is fixed. There's no need to check the new IRQ number as it will be ignored by the core. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Set the UPF_FIXED_PORT flagLaurent Pinchart
The base address, IRQ and baud rate generator parent clock rate can't be changed by userspace. Mark the port as fixed. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Remove duplicate interrupt check in verify port opLaurent Pinchart
The driver checks if the interrupt number is greater than nr_irqs and returns an error in that case. The same check is already performed by the caller, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Simplify baud rate calculation algorithmsLaurent Pinchart
Rewrite the baud rate register value calculations in easier to read forms. The computed value isn't modified. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Remove baud rate calculation algorithm 5Laurent Pinchart
The algorithm isn't used, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Sort headers alphabeticallyLaurent Pinchart
This helps locating duplicates. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-14serial: sh-sci: Convert to clk_prepare/unprepareLaurent Pinchart
Turn clk_enable() and clk_disable() calls into clk_prepare_enable() and clk_disable_unprepare() to get ready for the migration to the common clock framework. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-14serial: sh-sci: Don't enable/disable port from within break timerLaurent Pinchart
The break timer accesses hardware registers and thus requires the port to be enabled. It currently ensures this by enabling the port at the beginning of the timer handler, and disabling it at the end. However, the enable/disable operations call the runtime PM sync functions, which are not allowed in atomic context. The current situation is thus broken. This change relies on non-atomic code to enable/disable the port. The break timer will only be started from the IRQ handler, which already runs with the port enabled. We just need to ensure that the port won't be disabled with the timer running, and that's easily done by just cancelling the timer in the port disable function. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-12serial: sh-sci: Fix warnings due to improper casts and printk formatsLaurent Pinchart
Use the %zu and %pad printk specifiers to print size_t and dma_addr_t variables, and cast pointers to uintptr_t instead of unsigned int where applicable. This fixes warnings on platforms where pointers and/or dma_addr_t have a different size than int. Cc: linux-serial@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-25serial: sh: use DMA_COMPLETE for dma completion statusVinod Koul
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-08-02serial: sh-sci: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-31serial: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-26serial: sh-sci: Initialise variables before access in sci_set_termios()Simon Horman
This change addresses two warnings that are flagged by gcc relating to potential access to the ssr and cks variables while they are uninitialised. I have addressed this by initialising the values to the defaults present in sci_baud_calc_hscif(). It is my analysis that cks is always initialised if used but that without this change ssr may be accessed while uninitialised. The code altered by this patch was introduced by commit f303b364b41d3fc5bf879799128958400b7859aa ("serial: sh-sci: HSCIF support"). Reported-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit (git 2.34.1) at 2025-07-27 23:31:58 +0000