| Age | Commit message (Collapse) | Author |
|---|
|
We prepare same number of sbitmap as the number of streams. Use the
returned sbitmap number as index to the selected stream for a usbg_cmd.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/169f67261162c16342bc8543db93c259b05ead0b.1733876548.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Only allocate up to UASP_SS_EP_COMP_NUM_STREAMS number of session tags.
We should not be using more than UASP_SS_EP_COMP_NUM_STREAMS of tags due
to the number of commands limit we imposed. Each command uses a unique
tag. Any more than that is unnecessary. By limiting it, we can detect an
issue in our driver immediately should we run out of session tags.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/017016ffcab2f3c284d863fc42483b83dbd21b35.1733876548.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently the default bMaxBurst is 0. Set default bMaxBurst to 15 (i.e.
16 bursts) to Data IN and OUT endpoints to improve performance. It
should be fine for a controller that supports less than 16 bursts. It
should be able to negotiate properly with the host at packet level for
the end of burst.
If the controller can't handle a burst of 16, and high performance isn't
important, the user can use BOT protocol from mass_storage gadget driver
instead.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/9d6265db4d138e542f281988362bc4392b034d43.1733876548.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some old builds of Microsoft Windows 10 UASP class driver reject UASP
device with stream count of 2^4. To keep compatibility with both Linux
and Windows, let's increase the stream count to 2^5. Also, internal
tests show that stream count of 2^5 increases performance slightly.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/23bf7f5cb04da691fd6ba0a77babee9ad3195f44.1733876548.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The duplicate kmalloc here is causing memory leak. The request
preparation in bot_send_write_request is also done in
usbg_prepare_w_request. Remove the duplicate work.
Fixes: c52661d60f63 ("usb-gadget: Initial merge of target module for UASP + BOT")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/f4f26c3d586cde0d46f8c3bcb4e8ae32311b650d.1733876548.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Match usb endpoint using fullspeed endpoint descriptor to make sure the
wMaxPacketSize for fullspeed descriptors is automatically configured.
Fixes: c52661d60f63 ("usb-gadget: Initial merge of target module for UASP + BOT")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/e4507bc824aed6e7c7f5a718392ab6a7c1480a7f.1733876548.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Check to make sure that the GetInterface and SetInterface are for valid
interface. Return proper alternate setting number on GetInterface.
Fixes: 0b8b1a1fede0 ("usb: gadget: f_tcm: Provide support to get alternate setting in tcm function")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ffd91b4640945ea4d3b4f4091cf1abbdbd9cf4fc.1733876548.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We submitted the command with TARGET_SCF_ACK_KREF, which requires
acknowledgment of command completion. If the command fails, make sure to
decrement the ref count.
Fixes: cff834c16d23 ("usb-gadget/tcm: Convert to TARGET_SCF_ACK_KREF I/O krefs")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/3c667b4d9c8b0b580346a69ff53616b6a74cfea2.1733876548.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When respond with check_condition error status, clear from_transport
input so the target layer can translate the sense reason reported by
f_tcm.
Fixes: c52661d60f63 ("usb-gadget: Initial merge of target module for UASP + BOT")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/b2a5577efe7abd0af0051229622cf7d3be5cdcd0.1733876548.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Don't prematurely free the command. Wait for the status completion of
the sense status. It can be freed then. Otherwise we will double-free
the command.
Fixes: cff834c16d23 ("usb-gadget/tcm: Convert to TARGET_SCF_ACK_KREF I/O krefs")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ae919ac431f16275e05ec819bdffb3ac5f44cbe1.1733876548.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This commit addresses an issue related to below kernel panic where
panic_on_warn is enabled. It is caused by the unnecessary use of WARN_ON
in functionsfs_bind, which easily leads to the following scenarios.
1.adb_write in adbd 2. UDC write via configfs
================= =====================
->usb_ffs_open_thread() ->UDC write
->open_functionfs() ->configfs_write_iter()
->adb_open() ->gadget_dev_desc_UDC_store()
->adb_write() ->usb_gadget_register_driver_owner
->driver_register()
->StartMonitor() ->bus_add_driver()
->adb_read() ->gadget_bind_driver()
<times-out without BIND event> ->configfs_composite_bind()
->usb_add_function()
->open_functionfs() ->ffs_func_bind()
->adb_open() ->functionfs_bind()
<ffs->state !=FFS_ACTIVE>
The adb_open, adb_read, and adb_write operations are invoked from the
daemon, but trying to bind the function is a process that is invoked by
UDC write through configfs, which opens up the possibility of a race
condition between the two paths. In this race scenario, the kernel panic
occurs due to the WARN_ON from functionfs_bind when panic_on_warn is
enabled. This commit fixes the kernel panic by removing the unnecessary
WARN_ON.
Kernel panic - not syncing: kernel: panic_on_warn set ...
[ 14.542395] Call trace:
[ 14.542464] ffs_func_bind+0x1c8/0x14a8
[ 14.542468] usb_add_function+0xcc/0x1f0
[ 14.542473] configfs_composite_bind+0x468/0x588
[ 14.542478] gadget_bind_driver+0x108/0x27c
[ 14.542483] really_probe+0x190/0x374
[ 14.542488] __driver_probe_device+0xa0/0x12c
[ 14.542492] driver_probe_device+0x3c/0x220
[ 14.542498] __driver_attach+0x11c/0x1fc
[ 14.542502] bus_for_each_dev+0x104/0x160
[ 14.542506] driver_attach+0x24/0x34
[ 14.542510] bus_add_driver+0x154/0x270
[ 14.542514] driver_register+0x68/0x104
[ 14.542518] usb_gadget_register_driver_owner+0x48/0xf4
[ 14.542523] gadget_dev_desc_UDC_store+0xf8/0x144
[ 14.542526] configfs_write_iter+0xf0/0x138
Fixes: ddf8abd25994 ("USB: f_fs: the FunctionFS driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Akash M <akash.m5@samsung.com>
Link: https://lore.kernel.org/r/20241219125221.1679-1-akash.m5@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
crash caused by port being null
Considering that in some extreme cases, when performing the
unbinding operation, gserial_disconnect has cleared gser->ioport,
which triggers gadget reconfiguration, and then calls gs_read_complete,
resulting in access to a null pointer. Therefore, ep is disabled before
gserial_disconnect sets port to null to prevent this from happening.
Call trace:
gs_read_complete+0x58/0x240
usb_gadget_giveback_request+0x40/0x160
dwc3_remove_requests+0x170/0x484
dwc3_ep0_out_start+0xb0/0x1d4
__dwc3_gadget_start+0x25c/0x720
kretprobe_trampoline.cfi_jt+0x0/0x8
kretprobe_trampoline.cfi_jt+0x0/0x8
udc_bind_to_driver+0x1d8/0x300
usb_gadget_probe_driver+0xa8/0x1dc
gadget_dev_desc_UDC_store+0x13c/0x188
configfs_write_iter+0x160/0x1f4
vfs_write+0x2d0/0x40c
ksys_write+0x7c/0xf0
__arm64_sys_write+0x20/0x30
invoke_syscall+0x60/0x150
el0_svc_common+0x8c/0xf8
do_el0_svc+0x28/0xa0
el0_svc+0x24/0x84
Fixes: c1dca562be8a ("usb gadget: split out serial core")
Cc: stable <stable@kernel.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Link: https://lore.kernel.org/r/TYUPR06MB621733B5AC690DBDF80A0DCCD2042@TYUPR06MB6217.apcprd06.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently afunc_bind sets std_ac_if_desc.bNumEndpoints to 1 if
controls (mute/volume) are enabled. During next afunc_bind call,
bNumEndpoints would be unchanged and incorrectly set to 1 even
if the controls aren't enabled.
Fix this by resetting the value of bNumEndpoints to 0 on every
afunc_bind call.
Fixes: eaf6cbe09920 ("usb: gadget: f_uac2: add volume and mute support")
Cc: stable <stable@kernel.org>
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Link: https://lore.kernel.org/r/20241211115915.159864-1-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The meaning of this value is already used in several places,
but with constant values and comments to explain it separately.
It's better to have a central place to do this then use the macro
in those places for better readability.
Signed-off-by: Dingyan Li <18500469033@163.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20241030083858.46907-1-18500469033@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
accessing null pointer
Considering that in some extreme cases,
when u_serial driver is accessed by multiple threads,
Thread A is executing the open operation and calling the gs_open,
Thread B is executing the disconnect operation and calling the
gserial_disconnect function,The port->port_usb pointer will be set to NULL.
E.g.
Thread A Thread B
gs_open() gadget_unbind_driver()
gs_start_io() composite_disconnect()
gs_start_rx() gserial_disconnect()
... ...
spin_unlock(&port->port_lock)
status = usb_ep_queue() spin_lock(&port->port_lock)
spin_lock(&port->port_lock) port->port_usb = NULL
gs_free_requests(port->port_usb->in) spin_unlock(&port->port_lock)
Crash
This causes thread A to access a null pointer (port->port_usb is null)
when calling the gs_free_requests function, causing a crash.
If port_usb is NULL, the release request will be skipped as it
will be done by gserial_disconnect.
So add a null pointer check to gs_start_io before attempting
to access the value of the pointer port->port_usb.
Call trace:
gs_start_io+0x164/0x25c
gs_open+0x108/0x13c
tty_open+0x314/0x638
chrdev_open+0x1b8/0x258
do_dentry_open+0x2c4/0x700
vfs_open+0x2c/0x3c
path_openat+0xa64/0xc60
do_filp_open+0xb8/0x164
do_sys_openat2+0x84/0xf0
__arm64_sys_openat+0x70/0x9c
invoke_syscall+0x58/0x114
el0_svc_common+0x80/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x38/0x68
Fixes: c1dca562be8a ("usb gadget: split out serial core")
Cc: stable@vger.kernel.org
Suggested-by: Prashanth K <quic_prashk@quicinc.com>
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Acked-by: Prashanth K <quic_prashk@quicinc.com>
Link: https://lore.kernel.org/r/TYUPR06MB62178DC3473F9E1A537DCD02D2362@TYUPR06MB6217.apcprd06.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The UMP Function Block info m1.0 field (represented by is_midi1 sysfs
entry) is an enumeration from 0 to 2, while the midi2 gadget driver
incorrectly copies it to the corresponding snd_ump_block_info.flags
bits as-is. This made the wrong bit flags set when m1.0 = 2.
This patch corrects the wrong interpretation of is_midi1 bits.
Fixes: 29ee7a4dddd5 ("usb: gadget: midi2: Add configfs support")
Cc: stable@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20241127070213.8232-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.
Scripted using
git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
do
awk -i inplace '
/^#define EXPORT_SYMBOL_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/^#define MODULE_IMPORT_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/MODULE_IMPORT_NS/ {
$0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
}
/EXPORT_SYMBOL_NS/ {
if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &&
$0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &&
$0 !~ /^my/) {
getline line;
gsub(/[[:space:]]*\\$/, "");
gsub(/[[:space:]]/, "", line);
$0 = $0 " " line;
}
$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
"\\1(\\2, \"\\3\")", "g");
}
}
{ print }' $file;
done
Requested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Ensure type safety by using min_t() instead of casted min().
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Link: https://lore.kernel.org/r/20241112155817.3512577-2-snovitoll@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After an initial range change on the insigned int alt being > 1
the only possible values for alt are 0 or 1. Therefore the else
statement for values other than 0 or 1 is redundant and can be
removed. Replace the else if (all == 1) check with just an else.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/5f54ffd0-b5fe-4203-a626-c166becad362@gmail.com
Link: https://lore.kernel.org/r/20241107133348.22762-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the streamoff call was triggered by some previous disconnect
or userspace application shutdown the uvc_function_setup_continue
should not be called and the state should not be overwritten.
For this situation the set_alt(0) was never called and the streaming ep
has no USB_GADGET_DELAYED_STATUS pending.
Since the state then was already updated before we also omit the state
update.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240403-uvc_request_length_by_interval-v7-9-e224bb1035f0@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch is adding trace events for each request that is being
enqueued into the hw and will be completed. This way it is possible
to track the fill status of the gadget hardware and find potential
issues.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240403-uvc_request_length_by_interval-v7-8-e224bb1035f0@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
uvc_queue_setup
We set the minimum amount of v4l2 buffers that is possibly be pending
to UVCG_STREAMING_MIN_BUFFERS which is two. This way the driver will
always have at least one frame pending to be encoded while the other
is being enqueued in the hardware.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240403-uvc_request_length_by_interval-v7-7-e224bb1035f0@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Compressed formats generate content depending amount of data that is set
in the vb2 buffer by the payload_size. When streaming those formats it
is better to scatter that smaller data over all requests. This patch is
doing that by introducing the calculated req_payload_size which is
updated by each frame. It the uses this amount of data to fill the
isoc requests instead of the video->req_size.
For uncompressed formats it will not make a difference since the payload
size will be equal to the imagesize. Therefore the code will have no
effecta as req_payload_size will be equal to req_size.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240403-uvc_request_length_by_interval-v7-6-e224bb1035f0@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch is removing the initial imprecise and limited calculation of
requests needed to be used from the queue_setup callback. It instead
introduces the uvc_video_prep_requests function which is called
immediately before the request allocation.
With the information of the usb frame interval length it is possible to
calculate the number of requests needed during one frame duration.
Based on the calculated number of requests and the imagesize we
calculate the actual size per request. This calculation has the benefit
that the frame data is equally distributed over all allocated requests.
When the req_size is not in the range for the actually configured
max_req_size configured for the overall bandwidth we fallback
to use the max_req_size instead.
Since this calculations are only important for isoc transfers we just
use max_request_size for bulk and skip it.
As video->req_size will be recalculated on every video_enable resetting
it to 0 is not necessary anymore.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240403-uvc_request_length_by_interval-v7-5-e224bb1035f0@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The uvc gadget driver is lacking the information which frame interval
was set by the host. We add this information by implementing the g_parm
and s_parm callbacks.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240403-uvc_request_length_by_interval-v7-4-e224bb1035f0@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We install an kthread with pfifo priority that is iterating over all
prepared requests and keeps the isoc queue busy. This way it will be
scheduled with the same priority as the interrupt handler.
As the kthread is triggered with video_enable it will immediately
queue some zero length requests into the hw if there is no buffer data
available. It also watches the level of needed zero length requests in
the hardware not to fall under the UVCG_REQ_MAX_ZERO_COUNT threshold.
This way we can drop the function uvc_video_ep_queue_initial_requests
entirely.
By using the kthread to do the actual request handling the interrupt
handler will not be running into the time consuming and eventually
locking work of actually enqueueing the requests back into its own
pipeline. This work can now even be scheduled on another cpu.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240403-uvc_request_length_by_interval-v7-3-e224bb1035f0@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The complete handler will at least be called after 16 requests have
completed, but will still handle all finisher requests. Since we have
to maintain a costant filling in the isoc queue we ensure this by
adding zero length requests.
By counting the amount enqueued requests we can ensure that the queue is
never underrun and only need to get active if the queue is running
critical. This patch is setting 32 as the critical level, which
is twice the request amount that is needed to create interrupts.
To properly solve the amount of zero length requests that needs to
be held in the hardware after one interrupt needs to be measured
and depends on the runtime of the first enqueue run after the interrupt
triggered. For now we just use twice the amount of requests between an
interrupt.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240403-uvc_request_length_by_interval-v7-2-e224bb1035f0@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since the req_free list will updated if enqueuing one request was not
possible it will be added back to the free list. With every available
free request in the queue it is a valid case for the pump worker to use
it and continue the pending bufferdata into requests for the req_ready
list.
Fixes: 6acba0345b68 ("usb:gadget:uvc Do not use worker thread to pump isoc usb requests")
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240403-uvc_request_length_by_interval-v7-1-e224bb1035f0@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for frame-based frame format, which can be used to support
multiple formats like H264 or H265, in addition to MJPEG and YUV frames.
The frame-based format is set to H264 by default, but it can be updated
to other formats by modifying the GUID through the guid configfs
attribute. Different structures are used for all three formats, as
H264 has a different structure compared to MJPEG and uncompressed
formats. These structures will be passed to the frame make function
based on the active format, using a common frame structure with
additional parameters needed only for frame-based formats. These
parameters are handled at runtime in the UVC driver.
Signed-off-by: Akash Kumar <quic_akakum@quicinc.com>
Link: https://lore.kernel.org/r/20240927152138.31416-1-quic_akakum@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The configfs store callback should return the number of bytes consumed
not the total number of bytes we actually stored. These could differ if
for example the passed in string had a newline we did not store.
If the returned value does not match the number of bytes written the
writer might assume a failure or keep trying to write the remaining bytes.
For example the following command will hang trying to write the final
newline over and over again (tested on bash 2.05b):
echo foo > function_name
Fixes: 993a44fa85c1 ("usb: gadget: f_uac2: allow changing interface name via configfs")
Cc: stable <stable@kernel.org>
Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com>
Link: https://lore.kernel.org/r/20241006232637.4267-1-kgroeneveld@lenbrook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the extra semicolon after the
do {} while (0) in UVC_COPY_DESCRIPTOR macro.
Fix the following checkpatch.pl warning
WARNING: do {} while (0) macros should not be semicolon terminated
+#define UVC_COPY_DESCRIPTOR(mem, dst, desc) \
+ do { \
+ memcpy(mem, desc, (desc)->bLength); \
+ *(dst)++ = mem; \
+ mem += (desc)->bLength; \
+ } while (0);
Signed-off-by: Abhishek Tamboli <abhishektamboli9@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Link: https://lore.kernel.org/r/20241013142511.9946-1-abhishektamboli9@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function strcpy() is depreciated and potentially unsafe. It performs
no bounds checking on the destination buffer. This could result in
linear overflows beyond the end of the buffer, leading to all kinds of
misbehaviors. The safe replacement is strscpy() [1].
this fixes checkpatch warning:
WARNING: Prefer strscpy over strcpy
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1]
Signed-off-by: Abdul Rahim <abdul.rahim@myyahoo.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240914231756.503521-1-abdul.rahim@myyahoo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We move the func_utils.h header to include/linux/usb to be
able to compile function drivers outside of the
drivers/usb/gadget/function directory.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240116-ml-topic-u9p-v12-1-9a27de5160e0@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace kthread_create/wake_up_process() with kthread_run()
to simplify the code.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20240903014249.3098082-1-lihongbo22@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The bInterfaceProtocol is hardcoded to USB_CDC_ACM_PROTO_AT_V25TER. This
will lead to problems with ModemManger which will gladly try to probe
that port as a modem if the gadget also has a network function.
ModemManager will try to send AT commands to the ACM port. Make the
bInterfaceProtocol configurable. For this, track the number of instances
and only allow write to the property if there are no intances (yet).
This will also set bFunctionProtocol to the same value, see commit
5c8db070b448 ("USB: Change acm_iad_descriptor bFunctionProtocol to
USB_CDC_ACM_PROTO_AT_V25TER") for more details.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20240825180446.3757073-1-mwalle@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit "6acba0345b68 usb:gadget:uvc Do not use worker thread to pump
isoc usb requests", pump work could only be queued in uvc_video_complete()
and uvc_v4l2_qbuf(). If VIDIOC_QBUF is executed before VIDIOC_STREAMON,
we can only depend on uvc_video_complete() to queue pump work. However,
this requires some free requests in req_ready list. If req_ready list is
empty all the time, pump work will never be queued and video datas will
never be pumped to usb controller. Actually, this situation could happen
when run uvc-gadget with static image:
$ ./uvc-gadget -i 1080p.jpg uvc.0
When capture image from this device, the user app will always block there.
The issue is uvc driver has queued video buffer before streamon, but the
req_ready list is empty all the time after streamon. This will queue pump
work in uvcg_video_enable() to fill some request to req_ready list so the
uvc device could work properly.
Fixes: 6acba0345b68 ("usb:gadget:uvc Do not use worker thread to pump isoc usb requests")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240814112537.2608949-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While supporting GET_REPORT is a mandatory request per the HID
specification the current implementation of the GET_REPORT request responds
to the USB Host with an empty reply of the request length. However, some
USB Hosts will request the contents of feature reports via the GET_REPORT
request. In addition, some proprietary HID 'protocols' will expect
different data, for the same report ID, to be to become available in the
feature report by sending a preceding SET_REPORT to the USB Device that
defines what data is to be presented when that feature report is
subsequently retrieved via GET_REPORT (with a very fast < 5ms turn around
between the SET_REPORT and the GET_REPORT).
There are two other patch sets already submitted for adding GET_REPORT
support. The first [1] allows for pre-priming a list of reports via IOCTLs
which then allows the USB Host to perform the request, with no further
userspace interaction possible during the GET_REPORT request. And another
[2] which allows for a single report to be setup by userspace via IOCTL,
which will be fetched and returned by the kernel for subsequent GET_REPORT
requests by the USB Host, also with no further userspace interaction
possible.
This patch, while loosely based on both the patch sets, differs by allowing
the option for userspace to respond to each GET_REPORT request by setting
up a poll to notify userspace that a new GET_REPORT request has arrived. To
support this, two extra IOCTLs are supplied. The first of which is used to
retrieve the report ID of the GET_REPORT request (in the case of having
non-zero report IDs in the HID descriptor). The second IOCTL allows for
storing report responses in a list for responding to requests.
The report responses are stored in a list (it will be either added if it
does not exist or updated if it exists already). A flag (userspace_req) can
be set to whether subsequent requests notify userspace or not.
Basic operation when a GET_REPORT request arrives from USB Host:
- If the report ID exists in the list and it is set for immediate return
(i.e. userspace_req == false) then response is sent immediately,
userspace is not notified
- The report ID does not exist, or exists but is set to notify userspace
(i.e. userspace_req == true) then notify userspace via poll:
- If userspace responds, and either adds or update the response in
the list and respond to the host with the contents
- If userspace does not respond within the fixed timeout (2500ms)
but the report has been set prevously, then send 'old' report
contents
- If userspace does not respond within the fixed timeout (2500ms)
and the report does not exist in the list then send an empty
report
Note that userspace could 'prime' the report list at any other time.
While this patch allows for flexibility in how the system responds to
requests, and therefore the HID 'protocols' that could be supported, a
drawback is the time it takes to service the requests and therefore the
maximum throughput that would be achievable. The USB HID Specification
v1.11 itself states that GET_REPORT is not intended for periodic data
polling, so this limitation is not severe.
Testing on an iMX8M Nano Ultra Lite with a heavy multi-core CPU loading
showed that userspace can typically respond to the GET_REPORT request
within 1200ms - which is well within the 5000ms most operating systems seem
to allow, and within the 2500ms set by this patch.
[1] https://lore.kernel.org/all/20220805070507.123151-2-sunil@amarulasolutions.com/
[2] https://lore.kernel.org/all/20220726005824.2817646-1-vi@endrift.com/
Signed-off-by: David Sands <david.sands@biamp.com>
Signed-off-by: Chris Wulff <chris.wulff@biamp.com>
Link: https://lore.kernel.org/r/20240817142850.1311460-2-crwulff@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix potential dereferencing of ERR_PTR() in find_format_by_pix()
and uvc_v4l2_enum_format().
Fix the following smatch errors:
drivers/usb/gadget/function/uvc_v4l2.c:124 find_format_by_pix()
error: 'fmtdesc' dereferencing possible ERR_PTR()
drivers/usb/gadget/function/uvc_v4l2.c:392 uvc_v4l2_enum_format()
error: 'fmtdesc' dereferencing possible ERR_PTR()
Also, fix similar issue in uvc_v4l2_try_format() for potential
dereferencing of ERR_PTR().
Signed-off-by: Abhishek Tamboli <abhishektamboli9@gmail.com>
Link: https://lore.kernel.org/r/20240815102202.594812-1-abhishektamboli9@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This changes the UAPI to align with disussion of alt settings work.
fu_name is renamed to fu_vol_name, and alt settings mode names
are removed for now in favor of future work where they will be
settable in subdirectories for each alt mode.
discussion thread for api changes for alt mode settings:
https://lore.kernel.org/linux-usb/35be4668-58d3-894a-72cf-de1afaacae45@ivitera.com/T/
Signed-off-by: Chris Wulff <crwulff@gmail.com>
Link: https://lore.kernel.org/r/20240804002912.3293177-2-crwulff@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the ability for the USB FunctionFS (FFS) gadget driver to be able
to create Device Firmware Upgrade (DFU) functional descriptors. [1]
This patch allows implementation of DFU in userspace using the
FFS gadget. The DFU protocol uses the control pipe (ep0) for all
messaging so only the addition of the DFU functional descriptor
is needed in the kernel driver.
The DFU functional descriptor is written to the ep0 file along with
any other descriptors during FFS setup. DFU requires an interface
descriptor followed by the DFU functional descriptor.
This patch includes documentation of the added descriptor for DFU
and conversion of some existing documentation to kernel-doc format
so that it can be included in the generated docs.
An implementation of DFU 1.1 that implements just the runtime descriptor
using the FunctionFS gadget (with rebooting into u-boot for DFU mode)
has been tested on an i.MX8 Nano.
An implementation of DFU 1.1 that implements both runtime and DFU mode
using the FunctionFS gadget has been tested on Xilinx Zynq UltraScale+.
Note that for the best performance of firmware update file transfers, the
userspace program should respond as quick as possible to the setup packets.
[1] https://www.usb.org/sites/default/files/DFU_1.1.pdf
Signed-off-by: David Sands <david.sands@biamp.com>
Co-developed-by: Chris Wulff <crwulff@gmail.com>
Signed-off-by: Chris Wulff <crwulff@gmail.com>
Link: https://lore.kernel.org/r/20240811000004.1395888-2-crwulff@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This makes all string descriptors configurable for the UAC2 gadget
so the user can configure names of terminals and controls. Alt mode
names are not included for now and will be in future work related
to adding alternate settings.
discussion thread for api changes for alt mode settings:
https://lore.kernel.org/linux-usb/35be4668-58d3-894a-72cf-de1afaacae45@ivitera.com/T/
Signed-off-by: Chris Wulff <chris.wulff@biamp.com>
Link: https://lore.kernel.org/r/20240804001923.3279431-2-crwulff@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the usb fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert array initializers to C99 syntax by adding the '=' after
each designated initializer.
Fix the following smatch warnings:
drivers/usb/gadget/function/u_audio.c:1117:20:
warning: obsolete array initializer, use C99 syntax
drivers/usb/gadget/function/u_audio.c:1124:28:
warning: obsolete array initializer, use C99 syntax
drivers/usb/gadget/function/u_audio.c:1131:19:
warning: obsolete array initializer, use C99 syntax
drivers/usb/gadget/function/u_audio.c:1138:27:
warning: obsolete array initializer, use C99 syntax
drivers/usb/gadget/function/u_audio.c:1145:25:
warning: obsolete array initializer, use C99 syntax
Also, fix two checkpatch.pl warnings:
WARNING: please, no spaces at the start of a line
+ [UAC_FBACK_CTRL] = {$
WARNING: please, no spaces at the start of a line
+ [UAC_MUTE_CTRL] = {$
Signed-off-by: Abhishek Tamboli <abhishektamboli9@gmail.com>
Reviewed-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240801190209.500373-1-abhishektamboli9@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ``alt`` parameter was used as a way to differentiate between
f->disable() and f->set_alt(). As the code paths diverge quite a bit,
pull out the f->disable() code from ffs_func_set_alt(), everything will
become clearer and less error prone. No change in functionality
intended.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240802140428.2000312-3-tudor.ambarus@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
