summaryrefslogtreecommitdiff
path: root/drivers/usb/serial
AgeCommit message (Collapse)Author
2013-07-24usb: serial: option: Add ONYX 3G device supportEnrico Mioso
This patch adds support for the ONYX 3G device (version 1) from ALFA NETWORK. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24USB: ti_usb_3410_5052: fix dynamic-id matchingJohan Hovold
The driver failed to take the dynamic ids into account when determining the device type and therefore all devices were detected as 2-port devices when using the dynamic-id interface. Match on the usb-serial-driver field instead of doing redundant id-table searches. Reported-by: Anders Hammarquist <iko@iko.pp.se> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: ti_usb_3410_5052: remove vendor/product module parametersJohan Hovold
Remove the vendor and product module parameters which were added a long time ago when we did not have the dynamic sysfs interface to add new device ids (and which isn't limited to five new vid/pid pair). A vid/pid pair can be added dynamically using sysfs, for example: echo 0451 1234 >/sys/bus/usb-serial/drivers/ti_usb_3410_5052_1/new_id for 1-port adapters, or echo 0451 1234 >/sys/bus/usb-serial/drivers/ti_usb_3410_5052_2/new_id for 2-port adapters. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: ti_usb_3410_5052: remove unused wait queueJohan Hovold
The write wait queue is never added to since commit f1175daa5 ("USB: ti_usb_3410_5052: kill custom closing_wait"). Remove it completely. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: ti_usb_3410_5052: kill private fifoJohan Hovold
Kill private write fifo and use the already allocated port write fifo instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: safe_serial: remove vendor/product module parametersJohan Hovold
Remove the vendor and product module parameters which were added a long time ago when we did not have the dynamic sysfs interface to add new device ids (and which isn't limited to a single new vid/pid pair). A vid/pid pair can be added dynamically using sysfs, for example: echo 04dd 1234 >/sys/bus/usb-serial/drivers/safe_serial/new_id Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: mos7840: remove broken chase implementationJohan Hovold
Remove broken "chase" implementation which was supposed to be used to drain the write buffers at break. The chase implementation slept on a wait queue which was never woken up (i.e. no hardware buffers were queried), and thus amounted to nothing more than polling chars_in_buffer, something which has already been taken care of by the tty layer. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: io_ti: move port initialisation to probeJohan Hovold
Move port initialisation code from open to probe where it belongs. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: io_ti: kill private fifoJohan Hovold
Kill private write fifo and use the already allocated port write fifo instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: io_edgeport: remove unused definesJohan Hovold
Remove unused timeout defines. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: ftdi_sio: remove unused definesJohan Hovold
Remove some unused defines. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: ftdi_sio: remove vendor/product module parametersJohan Hovold
Remove the vendor and product module parameters which were added a long time ago when we did not have the dynamic sysfs interface to add new device ids (and which isn't limited to a single new vid/pid pair). A vid/pid pair can be added dynamically using sysfs, for example: echo 0403 1234 >/sys/bus/usb-serial/drivers/ftdi_sio/new_id Also fix up the in-code comment that got the sysfs path wrong. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: ftdi_sio: remove redundant raise of DTR/RTS at openJohan Hovold
Do not raise DTR/RTS a second time in set_termios at open -- this has already been taken care of by the tty layer. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: ftdi_sio: clean up device initialisationJohan Hovold
Do not use zeroed termios data to determine when to unconditionally configure the device at open. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: oti6858: do not call set_termios with uninitialised dataJohan Hovold
Make sure set_termios is not called with uninitialised data at open. The old termios struct is currently not used, but pass NULL instead to avoid future problems (e.g. stack data leak). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: pl2303: remove debugging noiseJohan Hovold
Only log the tty_flags in process_read_urb on errors. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: pl2303: clean up set_termiosJohan Hovold
Clean up set_termios somewhat. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: pl2303: clean up baud-rate handlingJohan Hovold
Clean up baud-rate handling somewhat. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: pl2303: refactor baud-rate handlingJohan Hovold
Break out baud-rate handling from set_termios. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: console: remove unnecessary operations testJohan Hovold
Remove unnecessary tests for open and write operations as these are set to the generic implementations by usb-serial core if left unset by a subdriver. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: console: use dev_dbgJohan Hovold
Use dev_dbg for debugging. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: serial: set drain delay at port probeJohan Hovold
The port drain delay is constant and should be set at port probe rather than open. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: serial: clean up dtr_rtsJohan Hovold
Since commit 957dacae ("TTY: fix DTR not being dropped on hang up") dtr_rts is no longer called for uninitialised ports (e.g. after a disconnect), which removes the need to grab the disconnect mutex. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: serial: remove hupping check from tiocmiwaitJohan Hovold
Since commit 31ca020b ("TTY: wake up processes last at hangup") there no longer any need to check the hupping flag in the generic tiocmiwait implementation, so remove it. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: serial: remove defensive test from set_termiosJohan Hovold
Remove defensive test from set_termios which is never called with a NULL tty. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23usb: option: add TP-LINK MA260Bjørn Mork
Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: option: add D-Link DWM-152/C1 and DWM-156/C1Alexandr \"Sky\" Ivanov
Adding support for D-Link DWM-152/C1 and DWM-156/C1 devices. DWM-152/C1: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=07d1 ProdID=3e01 Rev= 0.00 S: Product=USB Configuration S: SerialNumber=1234567890ABCDEF C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms DWM-156/C1: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=07d1 ProdID=3e02 Rev= 0.00 S: Product=DataCard Device S: SerialNumber=1234567890ABCDEF C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Alexandr Ivanov <alexandr.sky@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-22USB: cp210x: add MMB and PI ZigBee USB Device SupportSami Rahman
Added support for MMB Networks and Planet Innovation Ingeni ZigBee USB devices using customized Silicon Labs' CP210x.c USB to UART bridge drivers with PIDs: 88A4, 88A5. Signed-off-by: Sami Rahman <sami.rahman@mmbresearch.com> Tested-by: Sami Rahman <sami.rahman@mmbresearch.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-22usb: cp210x support SEL C662 Vendor/DeviceBarry Grussling
This patch adds support for the Schweitzer Engineering Laboratories C662 USB cable based off the CP210x driver. Signed-off-by: Barry Grussling <barry@grussling.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-22USB: option: append Petatel NP10T device to GSM modems listDaniil Bolsun
This patch was tested on 3.10.1 kernel. Same models of Petatel NP10T modems have different device IDs. Unfortunately they have no additional revision information on a board which may treat them as different devices. Currently I've seen only two NP10T devices with various IDs. Possibly Petatel NP10T list will be appended upon devices with new IDs will appear. Signed-off-by: Daniil Bolsun <dan.bolsun@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-22usb: serial: cp210x: Add USB ID for Netgear Switches embedded serial adapterLuiz Angelo Daros de Luca
This adds NetGear Managed Switch M4100 series, M5300 series, M7100 series USB ID (0846:0110) to the cp210x driver. Without this, the serial adapter is not recognized in Linux. Description was obtained from an Netgear Eng. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-24USB: option,qcserial: move Novatel Gobi1K IDs to qcserialDan Williams
These devices are all Gobi1K devices (according to the Windows INF files) and should be handled by qcserial instead of option. Their network port is handled by qmi_wwan. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-24Merge 3.10-rc7 into usb-nextGreg Kroah-Hartman
We want the USB fixes and other good stuff in this branch as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-19USB: serial: ti_usb_3410_5052: new device id for Abbot strip port cableAnders Hammarquist
Add product id for Abbott strip port cable for Precision meter which uses the TI 3410 chip. Signed-off-by: Anders Hammarquist <iko@iko.pp.se> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17USB: serial: increase the number of devices we supportGreg Kroah-Hartman
We had the limit of 255 USB to serial devices on one system for almost 15 years, with no complaints. But now it's time to move on from these tiny "baby" systems, and bump the number up to 512, which should last us a few more years: "512 is a nice number" -- Tobias Winter Note, this is still a static value, and uses up tty core memory with this many tty devices allocated. Converting the driver to use TTY_DRIVER_DYNAMIC_DEV is the next thing to do in order to remove this limitation. Reported-by: Tobias Winter <tobias@linuxdingsda.de> Tested-by: Tobias Winter <tobias@linuxdingsda.de> Reviewed-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17USB: serial: make minor allocation dynamicGreg Kroah-Hartman
This moves the allocation of minor device numbers from a static array to be dynamic, using the idr interface. This means that you could potentially get "gaps" in a minor number range for a single USB serial device with multiple ports, but all should still work properly. We remove the 'minor' field from the usb_serial structure, as it no longer makes any sense for it (use the field in the usb_serial_port structure if you really want to know this number), and take the fact that we were overloading a number in this field to determine if we had initialized the minor numbers or not, and just use a flag variable instead. Note, we still have the limitation of 255 USB to serial devices in the system, as that is all we are registering with the TTY layer at this point in time. Tested-by: Tobias Winter <tobias@linuxdingsda.de> Reviewed-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17Merge 3.10-rc6 into usb-nextGreg Kroah-Hartman
We want the fixes in this branch as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-10USB: serial: ports: add minor and port numberGreg Kroah-Hartman
The usb_serial_port structure had the number field, which was the minor number for the port, which almost no one really cared about. They really wanted the number of the port within the device, which you had to subtract from the minor of the parent usb_serial_device structure. To clean this up, provide the real minor number of the port, and the number of the port within the serial device separately, as these numbers might not be related in the future. Bonus is that this cleans up a lot of logic in the drivers, and saves lines overall. Tested-by: Tobias Winter <tobias@linuxdingsda.de> Reviewed-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -- drivers/staging/serqt_usb2/serqt_usb2.c | 21 +++-------- drivers/usb/serial/ark3116.c | 2 - drivers/usb/serial/bus.c | 6 +-- drivers/usb/serial/console.c | 2 - drivers/usb/serial/cp210x.c | 2 - drivers/usb/serial/cypress_m8.c | 4 +- drivers/usb/serial/digi_acceleport.c | 6 --- drivers/usb/serial/f81232.c | 5 +- drivers/usb/serial/garmin_gps.c | 6 +-- drivers/usb/serial/io_edgeport.c | 58 ++++++++++++-------------------- drivers/usb/serial/io_ti.c | 21 ++++------- drivers/usb/serial/keyspan.c | 29 +++++++--------- drivers/usb/serial/metro-usb.c | 4 +- drivers/usb/serial/mos7720.c | 37 +++++++++----------- drivers/usb/serial/mos7840.c | 52 +++++++++------------------- drivers/usb/serial/opticon.c | 2 - drivers/usb/serial/pl2303.c | 2 - drivers/usb/serial/quatech2.c | 7 +-- drivers/usb/serial/sierra.c | 2 - drivers/usb/serial/ti_usb_3410_5052.c | 10 ++--- drivers/usb/serial/usb-serial.c | 7 ++- drivers/usb/serial/usb_wwan.c | 2 - drivers/usb/serial/whiteheat.c | 20 +++++------ include/linux/usb/serial.h | 6 ++- 24 files changed, 133 insertions(+), 180 deletions(-)
2013-06-10USB: pl2303: fix device initialisation at openJohan Hovold
Do not use uninitialised termios data to determine when to configure the device at open. This also prevents stack data from leaking to userspace in the OOM error path. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-10USB: spcp8x5: fix device initialisation at openJohan Hovold
Do not use uninitialised termios data to determine when to configure the device at open. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-10USB: f81232: fix device initialisation at openJohan Hovold
Do not use uninitialised termios data to determine when to configure the device at open. This also prevents stack data from leaking to userspace. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-08Merge 3.10-rc5 into usb-nextGreg Kroah-Hartman
We need the changes in this branch. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06USB: option,zte_ev: move most ZTE CDMA devices to zte_evDan Williams
Per some ZTE Linux drivers I found for the AC2716, the following patch moves most ZTE CDMA devices from option to zte_ev. The blacklist stuff that option does is not required with zte_ev, because it doesn't implement any of the send_setup hooks which the blacklist suppressed. I did not move the 2718 over because I could not find any ZTE Linux drivers for that device, nor even any Windows drivers. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06USB: option: blacklist network interface on Huawei E1820Bjørn Mork
The mode used by Windows for the Huawei E1820 will use the same ff/ff/ff class codes for both serial and network functions. Reported-by: Graham Inggs <graham.inggs@uct.ac.za> Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06USB: whiteheat: fix broken port configurationJohan Hovold
When configuring the port (e.g. set_termios) the port minor number rather than the port number was used in the request (and they only coincide for minor number 0). Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-05USB: serial: fix TIOCMIWAIT return valueJohan Hovold
Fix regression introduced by commit 143d9d9616 ("USB: serial: add tiocmiwait subdriver operation") which made the ioctl operation return ENODEV rather than ENOIOCTLCMD when a subdriver TIOCMIWAIT implementation is missing. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-04USB: mos7720: fix hardware flow controlJohan Hovold
The register access to enable hardware flow control depends on the device port number and not the port minor number. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-04USB: keyspan: remove unused endpoint-array accessJohan Hovold
Remove the no longer used endpoint-array access completely. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-04USB: keyspan: fix bogus array indexJohan Hovold
The outcont_endpoints array was indexed using the port minor number (which can be greater than the array size) rather than the device port number. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-04USB: zte_ev: fix broken openJohan Hovold
Remove bogus port-number check in open and close, which prevented this driver from being used with a minor number different from zero. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-16 16:19:17 +0000