summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2011-12-07MIPS: Alchemy: Au1300 SoC supportManuel Lauss
Add basic support for the Au1300 variant(s): - New GPIO/Interrupt controller - DBDMA ids - USB setup - MMC support - enable various PSC drivers - detection code. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2866/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2011-12-06treewide: Fix comment and string typo 'bufer'Paul Bolle
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2011-12-02treewide: Fix typos in various parts of the kernel, and fix some comments.Justin P. Mattock
The below patch fixes some typos in various parts of the kernel, as well as fixes some comments. Please let me know if I missed anything, and I will try to get it changed and resent. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-01Merge branch 'for-usb-linus' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus * 'for-usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci: Revert "xHCI: reset-on-resume quirk for NEC uPD720200" xHCI: fix bug in xhci_clear_command_ring()
2011-12-01usb: ftdi_sio: add PID for Propox ISPcable IIIMarcin Kościelnicki
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-01Revert "xHCI: reset-on-resume quirk for NEC uPD720200"Sarah Sharp
This reverts commit df711fc9962b9491af2b92bd0d21ecbfefe4e5fa. The commit added a reset-on-resume quirk because the NEC chipset stopped responding to commands about 30 minutes after a system resume from suspend. We thought it was a chipset issue, but it turns out that the xHCI driver was zeroing out the link TRB after a successful context restore during resume. The host controller would fall off the command ring sometime later, causing it to not respond to new commands. The link TRB issue has been fixed with commit 158886cd2cf4599e04f9b7e10cb767f5f39b14f1 "xHCI: fix bug in xhci_clear_command_ring()", so revert the reset-on-resume quirk, as it's not necessary. Commit df711fc9962b9491af2b92bd0d21ecbfefe4e5fa was marked for stable trees back to 2.6.37, but according to my mail, it has not made it into Linus' tree or the stable trees yet. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Julian Sikorski <belegdol@gmail.com> Cc: Andiry Xu <andiry.xu@amd.com>
2011-12-01xHCI: fix bug in xhci_clear_command_ring()Andiry Xu
When system enters suspend, xHCI driver clears command ring by writing zero to all the TRBs. However, this also writes zero to the Link TRB, and the ring is mangled. This may cause driver accesses wrong memory address and the result is unpredicted. When clear the command ring, keep the last Link TRB intact, only clear its cycle bit. This should fix the "command ring full" issue reported by Oliver Neukum. This should be backported to stable kernels as old as 2.6.37, since the commit 89821320 "xhci: Fix command ring replay after resume" is merged. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Oliver Neukum <oneukum@suse.de>
2011-11-30USB: ohci-s3c2410: add PM supportJingoo Han
This patch adds power management support such as suspend and resume functions. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29ARM: at91/udc: use gpio_is_valid to check the gpioJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-29ARM: at91/ohci: use gpio_is_valid to check the gpioJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-29usb: gadget: fsl_udc: fix dequeuing a request in progressLi Yang
The original implementation of dequeuing a request in progress is not correct. Change to use a correct process and also clean up the related functions a little bit. Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29usb: fsl_mxc_udc.c: Remove compile-time dependency of MX35 SoC typeFabio Estevam
In order to support multiple SoC kernel image, compile-time dependency on a specific SoC type should be avoided. fsl_udc_clk_finalize is already protected by cpu_is_mx35(), so remove the compile-time check for CONFIG_SOC_IMX35. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29usb: fsl_mxc_udc.c: Fix build issue by including missing header fileFabio Estevam
Fix the following build error: CC [M] drivers/usb/gadget/fsl_mxc_udc.o drivers/usb/gadget/fsl_mxc_udc.c: In function 'fsl_udc_clk_finalize': drivers/usb/gadget/fsl_mxc_udc.c:98: error: implicit declaration of function 'readl' drivers/usb/gadget/fsl_mxc_udc.c:100: error: implicit declaration of function 'writel' This error is caused by the follwing commit: (16fcb63: arm/imx: remove mx31_setup_weimcs( ) from mx31.h) ,which removed '#include <linux/io.h>' from mx31.h. fsl_mxc_udc.c includes <mach/hardware.h>, which in turns includes mx31.h, so that's the reason fsl_mxc_udc.c built fine previously. Instead of relying on the indirect inclusion of the linux/io.h header file, include it directly in fsl_mxc_udc.c. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29USB: fsl_udc_core: use usb_endpoint_xfer_isoc to judge ISO XFERPeter Chen
Some ISO gadgets, like audio, has SYNC attribute as well as USB_ENDPOINT_XFER_ISOC for their bmAttributes at ISO endpoint descriptor. So, it needs to use usb_endpoint_xfer_isoc to judge ISO XFER. Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29usb: udc: Fix gadget driver's speed check in various UDC driversMichal Nazarewicz
Several UDC drivers had a gadget driver's speed sanity check of the form of: driver->speed != USB_SPEED_HIGH or: driver->speed != USB_SPEED_HIGH && driver->speed != USB_SPEED_FULL As more and more gadget drivers support USB SuperSpeed, driver->speed may be set to USB_SPEED_SUPER and UDC driver should handle such gadget correctly. The above checks however fail to recognise USB_SPEED_SUPER as a valid speed. This commit changes the two checks to: driver->speed < USB_SPEED_HIGH or: driver->speed < USB_SPEED_FULL respectively. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Reported-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29usb: gadget: fix g_serial regressionRobert Jarzmik
Commit "usb: gadget: use config_ep_by_speed() instead of ep_choose()" broke g_serial in "non ACM nor OBEX" mode. Apply a trivial fix on usb endpoints discovery. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29usb: renesas_usbhs: fixup driver speedKuninori Morimoto
This patch cares latest USB_SPEED_SUPER support. renesas_usbhs can not use super-speed, but can use full/high speed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29usb: renesas_usbhs: fixup gadget.dev.driver when udc_stop.Kuninori Morimoto
current renesas_usbhs is using new style udc_start/stop from af1d7056a5c1e5eaaf807ddd1423101db84668d0 (usb: gadget: renesas: convert to new style). But current renesas_usbhs driver didn't care about gadget.dev.driver when udc_stop. it cause rmmod oops. This patch care it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29usb: renesas_usbhs: fixup signal the driver that cable was disconnectedKuninori Morimoto
current renesas_usbhs is using new style udc_start/stop from af1d7056a5c1e5eaaf807ddd1423101db84668d0 (usb: gadget: renesas: convert to new style). cable disconnected signal was needed. This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29usb: renesas_usbhs: fixup device_register timingKuninori Morimoto
current renesas_usbhs is using new style udc_start/stop from af1d7056a5c1e5eaaf807ddd1423101db84668d0 (usb: gadget: renesas: convert to new style). But bind() function will fail if it was called before device_register() (or device_add()). This patch modifies this issue. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29usb: musb: PM: fix context save/restore in suspend/resume pathKevin Hilman
Currently the driver tries to save context in the suspend path, but will cause an abort if the device is already runtime suspended. This happens, for example, if MUSB loaded/compiled-in, in host mode, but no USB devices are attached. MUSB will be runtime suspended, but then attempting a system suspend will crash due to the context save being attempted while the device is disabled. On OMAP, as of v3.1, the driver's ->runtime_suspend() callback will be called late in the suspend path (by the PM domain layer) if the driver is not already runtime suspended, ensuring a full shutdown. Therefore, the context save is not needed in the ->suspend() method since it will be called in the ->runtime_suspend() method anyways (similarily for resume.) NOTE: this leaves the suspend/resume methods basically empty (with some FIXMEs and comments, but I'll leave it to the maintainers to decide whether to remove them. Cc: stable@vger.kernel.org Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29EHCI : Fix a regression in the ISO schedulerMatthieu CASTET
Fix a regression that was introduced by commit 811c926c538f7e8d3c08b630dd5844efd7e000f6 (USB: EHCI: fix HUB TT scheduling issue with iso transfer). We detect an error if next == start, but this means uframe 0 can't be allocated anymore for iso transfer... Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-28xHCI: reset-on-resume quirk for NEC uPD720200Andiry Xu
Julian Sikorski reports NEC uPD720200 does not work stable after suspend and resume. Re-initialize the host in xhci_resume(). This should be backported to stable kernels as old as 2.6.37. The kernel will need to include commit c877b3b2ad5cb9d4fe523c5496185cc328ff3ae9 "xhci: Add reset on resume quirk for asrock p67 host" for this patch to work. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Reported-by: Julian Sikorski <belegdol@gmail.com> Tested-by: Julian Sikorski <belegdol@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2011-11-28usb: convert drivers/usb/* to use module_platform_driver()Axel Lin
This patch converts the drivers in drivers/usb/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Felipe Balbi <balbi@ti.com> Cc: Li Yang <leoli@freescale.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26usb/isp1760: Fix race condition memory leakArvid Brodin
This fixes a memory leak reported by Catalin Marinas: schedule_ptds() is called from isp1760_irq() and removes the qh from the controlqhs queue but ep->hcpriv still points to the qh and therefore it is not freed. Shortly after this, the isp1760_endpoint_disable() function sets ep->hcpriv to NULL and calls schedule_ptds() but since the corresponding qh is no longer in the queue, it is simply forgotten and reported by kmemleak. With this patch, the qh is always freed at endpoint_disable, instead, and the corresponding entry removed from the queue head list. While I was at it, I also replaced the lines in isp1760_endpoint_disable() that removed remaining qtds from the qh with a WARN_ON check for non-empty qh, in line with earlier comments from Alan Stern (linux-usb list, 2011-07-20). Signed-off-by: Arvid Brodin <arvid.brodin@enea.com> Tested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26usb/isp1760: Simpler queue head list code.Arvid Brodin
Small code refactoring to ease the real fix in patch #2. Signed-off-by: Arvid Brodin <arvid.brodin@enea.com> Tested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26xHCI: Adding #define values used for hub descriptorAman Deep
xhci-hub used some numerical values for initialisation of root hub descriptors. #define values are addded in usb 2.0 hub specification file and these values are used for root hub characteristics initialisation. Also use some #defines in places where magic numbers are being used. Signed-off-by: Aman Deep <amandeep3986@gmail.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26USB: OTG should be linked before HostNeil Zhang
For OTG controller, the host driver will call function otg_get_transceiver to get the otg transceiver, so we need to init the OTG driver before HOST. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26USB: serial: ftdi_sio: Handle the old_termios == 0 case e.g. uart_resume_port()Andrew Worsley
Handle null old_termios in ftdi_set_termios() calls from uart_resume_port(). Signed-off-by: Andrew Worsley <amworsley@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26USB: remove BKL commentsDavidlohr Bueso
The BKL is a gonner. Signed-off-by: Davidlohr Bueso <dave@gnu.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26USB: whci-hcd: fix endian conversion in qset_clear()Dan Carpenter
qset->qh.link is an __le64 field and we should be using cpu_to_le64() to fill it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26USB: usb-storage: unusual_devs entry for Kingston DT 101 G2Qinglin Ye
Kingston DT 101 G2 replies a wrong tag while transporting, add an unusal_devs entry to ignore the tag validation. Signed-off-by: Qinglin Ye <yestyle@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26usb: option: add SIMCom SIM5218Veli-Pekka Peltola
Tested with SIM5218EVB-KIT evaluation kit. Signed-off-by: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26usb: option: add Huawei E353 controlling interfacesDirk Nehring
This patch creates the missing controlling devices for the Huawei E353 HSPA+ stick. Signed-off-by: Dirk Nehring <dnehring@gmx.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26Merge 3.2-rc3 into usb-linusGreg Kroah-Hartman
This pulls in the latest USB bugfixes and helps a few of the drivers merge nicer in the future due to changes in both branches. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-23Merge branch 'pm-freezer' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc into pm-freezer * 'pm-freezer' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc: (24 commits) freezer: fix wait_event_freezable/__thaw_task races freezer: kill unused set_freezable_with_signal() dmatest: don't use set_freezable_with_signal() usb_storage: don't use set_freezable_with_signal() freezer: remove unused @sig_only from freeze_task() freezer: use lock_task_sighand() in fake_signal_wake_up() freezer: restructure __refrigerator() freezer: fix set_freezable[_with_signal]() race freezer: remove should_send_signal() and update frozen() freezer: remove now unused TIF_FREEZE freezer: make freezing() test freeze conditions in effect instead of TIF_FREEZE cgroup_freezer: prepare for removal of TIF_FREEZE freezer: clean up freeze_processes() failure path freezer: kill PF_FREEZING freezer: test freezable conditions while holding freezer_lock freezer: make freezing indicate freeze condition in effect freezer: use dedicated lock instead of task_lock() + memory barrier freezer: don't distinguish nosig tasks on thaw freezer: remove racy clear_freeze_flag() and set PF_NOFREEZE on dead tasks freezer: rename thaw_process() to __thaw_task() and simplify the implementation ...
2011-11-22net: remove netdev_alloc_page and use __GFP_COLDEric Dumazet
Given we dont use anymore the struct net_device *dev argument, and this interface brings litle benefit, remove netdev_{alloc|free}_page(), to debloat include/linux/skbuff.h a bit. (Some drivers used a mix of these interfaces and alloc_pages()) When allocating a page given to device for DMA transfer (device to memory), it makes sense to use a cold one (__GFP_COLD) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-21Merge branch 'usb-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (48 commits) USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c USB: option: add PID of Huawei E173s 3G modem OHCI: final fix for NVIDIA problems (I hope) USB: option: release new PID for ZTE 3G modem usb: Netlogic: Fix HC_LENGTH call in ehci-xls.c USB: storage: ene_ub6250: fix compile warnings USB: option: add id for 3G dongle Model VT1000 of Viettel USB: serial: pl2303: rm duplicate id USB: pch_udc: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor USB: pch_udc: Support new device LAPIS Semiconductor ML7831 IOH usb-storage: Accept 8020i-protocol commands longer than 12 bytes USB: quirks: adding more quirky webcams to avoid squeaky audio powerpc/usb: fix type cast for address of ioremap to compatible with 64-bit USB: at91: at91-ohci: fix set/get power USB: cdc-acm: Fix disconnect() vs close() race USB: add quirk for Logitech C600 web cam USB: EHCI: fix HUB TT scheduling issue with iso transfer USB: XHCI: resume root hubs when the controller resumes USB: workaround for bug in old version of GCC USB: ark3116 initialisation fix ...
2011-11-21usb_storage: don't use set_freezable_with_signal()Tejun Heo
The current implementation of set_freezable_with_signal() is buggy and tricky to get right. usb-storage is the only user and its use can be avoided trivially. All usb-storage wants is to be able to sleep with timeout and get woken up if freezing() becomes true. This can be trivially implemented by doing interruptible wait w/ freezing() included in the wait condition. There's no reason to use set_freezable_with_signal(). Perform interruptible wait on freezing() instead of using set_freezable_with_signal(), which is scheduled for removal. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (86 commits) ipv4: fix redirect handling ping: dont increment ICMP_MIB_INERRORS sky2: fix hang in napi_disable sky2: enforce minimum ring size bonding: Don't allow mode change via sysfs with slaves present f_phonet: fix page offset of first received fragment stmmac: fix pm functions avoiding sleep on spinlock stmmac: remove spin_lock in stmmac_ioctl. stmmac: parameters auto-tuning through HW cap reg stmmac: fix advertising 1000Base capabilties for non GMII iface stmmac: use mdelay on timeout of sw reset sky2: version 1.30 sky2: used fixed RSS key sky2: reduce default Tx ring size sky2: rename up/down functions sky2: pci posting issues sky2: fix hang on shutdown (and other irq issues) r6040: fix check against MCRO_HASHEN bit in r6040_multicast_list MAINTAINERS: change email address for shemminger pch_gbe: Move #include of module.h ...
2011-11-20HID/usbled: add support for Dream Cheeky DL100B Mailbox Friends AlertDan Delaney
Adding support for Dream Cheeky DL1800B Friend Alert device. Signed-off-by: Dan Delaney <drdelaney@loclhst.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-18usb: dwc3: fix a warningAlessandro Rubini
The previous patch left an unused variable, I apologize. Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18usb: dwc3: use debugfs_print_regs32()Alessandro Rubini
This a use example of the regs32 utilities in debugfs, although this fuse use ":" as separator between name and value, and debugs uses "=" (as it looked to me a more common practice). Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18USB: Fix Corruption issue in USB ftdi driver ftdi_sio.cAndrew Worsley
Fix for ftdi_set_termios() glitching output ftdi_set_termios() is constantly setting the baud rate, data bits and parity unnecessarily on every call, . When called while characters are being transmitted can cause the FTDI chip to corrupt the serial port bit stream output by stalling the output half a bit during the output of a character. Simple fix by skipping this setting if the baud rate/data bits/parity are unchanged. Signed-off-by: Andrew Worsley <amworsley@gmail.com> Cc: stable <stable@vger.kernel.org> ---- I had a brief run with strace on the getty and it was doing ioctl()s on each call but it didn't look relavant to the problem. I think the issue is that XON/XOFF flow control was being implmented via hardware - for the ixoff to allow the user to use XON/XOFF to control output. Unfortunately it would send 3 Control URBs updating all of the settings after each piece of input I am trying to work around the issue of gmail messing with the tab/spacing by submitting via SMTP via gmail which I believe should fix the issue. The patch is against v3.2-rc2 and compiles - but no additional testing in this kernel has been done. Thanks Andrew Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18USB: option: add PID of Huawei E173s 3G modemFerenc Wagner
Signed-off-by: Ferenc Wagner <wferi@niif.hu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18OHCI: final fix for NVIDIA problems (I hope)Alan Stern
Problems with NVIDIA's OHCI host controllers persist. After looking carefully through the spec, I finally realized that when a controller is reset it then automatically goes into a SUSPEND state in which it is completely quiescent (no DMA and no IRQs) and from which it will not awaken until the system puts it into the OPERATIONAL state. Therefore there's no need to worry about controllers being in the RESET state for extended periods, or remaining in the OPERATIONAL state during system shutdown. The proper action for device initialization is to put the controller into the RESET state (if it's not there already) and then to issue a software reset. Similarly, the proper action for device shutdown is simply to do a software reset. This patch (as1499) implements such an approach. It simplifies initialization and shutdown, and allows the NVIDIA shutdown-quirk code to be removed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Andre "Osku" Schmidt <andre.osku.schmidt@googlemail.com> Tested-by: Arno Augustin <Arno.Augustin@web.de> Cc: stable <stable@vger.kernel.org> [after tested in 3.2 for a while] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18USB: option: release new PID for ZTE 3G modemzheng.zhijian@zte.com.cn
This patch adds new PIDs for ZTE 3G modem, after we confirm it and tested. Thanks for Dan's work at kernel option devier. Signed-off-by: Alvin.Zheng <zheng.zhijian@zte.com.cn> Signed-off-by: wsalvin <wsalvin@yahoo.com.cn> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18usb: Netlogic: Fix HC_LENGTH call in ehci-xls.cJayachandran C
Fix compile error, HC_LENGTH now takes two parameters and ehci needs to be passed as the first parameter. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit (git 2.34.1) at 2025-09-13 10:03:18 +0000