summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2016-02-01Merge 4.5-rc2 into tty-nextGreg Kroah-Hartman
We want the tty/serial fixes in here as well to make merges easier. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28tty: Use termios c_*flag macrosPeter Hurley
Expressions of the form "tty->termios.c_*flag & FLAG" are more clearly expressed with the termios flags macros, I_FLAG(), C_FLAG(), O_FLAG(), and L_FLAG(). Convert treewide. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28Merge tag 'usb-serial-4.5-rc2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.5-rc2 Here are two fixes of crashes in the visor driver that could be triggered using bad (malicious) descriptors, a fix for two memory leaks in the new mxu11x0 driver, and an interface-blacklist fix for the option driver. Included are also some new device ids. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-01-27tty: Fix tty_init_termios() declarationPeter Hurley
tty_init_termios() never returns an error; re-declare as void. Remove unnecessary error handling from callers. Remove extern declarations of tty_free_termios() and free_tty_struct() and re-declare in file scope. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27wusb: Use skcipherHerbert Xu
This patch replaces uses of blkcipher with skcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-25USB: option: fix Cinterion AHxx enumerationJohn Ernberg
In certain kernel configurations where the cdc_ether and option drivers are compiled as modules there can occur a race condition in enumeration. This causes the option driver to enumerate the ethernet(wwan) interface as usb-serial interfaces. usb-devices output for the modem: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=0055 Rev=00.00 S: Manufacturer=Cinterion S: Product=AHx C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=10mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether Signed-off-by: John Ernberg <john.ernberg@actia.se> Fixes: 1941138e1c02 ("USB: added support for Cinterion's products...") Cc: stable <stable@vger.kernel.org> # v3.9: 8ff10bdb14a52 Signed-off-by: Johan Hovold <johan@kernel.org>
2016-01-25USB: mxu11x0: fix memory leak on usb_serial private dataMathieu OTHACEHE
On nominal execution, private data allocated on port_probe and attach are never freed. Add port_remove and release callbacks to free them respectively. Signed-off-by: Mathieu OTHACEHE <m.othacehe@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-01-25USB: serial: ftdi_sio: add support for Yaesu SCU-18 cableGreg Kroah-Hartman
Harald Linden reports that the ftdi_sio driver works properly for the Yaesu SCU-18 cable if the device ids are added to the driver. So let's add them. Reported-by: Harald Linden <harald.linden@7183.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-01-25USB: serial: option: Adding support for Telit LE922Daniele Palmas
This patch adds support for two PIDs of LE922. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-01-25USB: serial: visor: fix crash on detecting device without write_urbsVladis Dronov
The visor driver crashes in clie_5_attach() when a specially crafted USB device without bulk-out endpoint is detected. This fix adds a check that the device has proper configuration expected by the driver. Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Fixes: cfb8da8f69b8 ("USB: visor: fix initialisation of UX50/TH55 devices") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-01-25USB: visor: fix null-deref at probeJohan Hovold
Fix null-pointer dereference at probe should a (malicious) Treo device lack the expected endpoints. Specifically, the Treo port-setup hack was dereferencing the bulk-in and interrupt-in urbs without first making sure they had been allocated by core. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-01-25USB: cp210x: add ID for IAI USB to RS485 adaptorPeter Dedecker
Added the USB serial console device ID for IAI Corp. RCB-CV-USB USB to RS485 adaptor. Signed-off-by: Peter Dedecker <peter.dedecker@hotmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-01-24usb: hub: do not clear BOS field during reset deviceDu, Changbin
In function usb_reset_and_verify_device, the old BOS descriptor may still be used before allocating a new one. (usb_unlocked_disable_lpm function uses it under the situation that it fails to disable lpm.) So we cannot set the udev->bos to NULL before that, just keep what it was. It will be overwrite when allocating a new one. Crash log: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffff8171f98d>] usb_enable_link_state+0x2d/0x2f0 Call Trace: [<ffffffff8171ed5b>] ? usb_set_lpm_timeout+0x12b/0x140 [<ffffffff8171fcd1>] usb_enable_lpm+0x81/0xa0 [<ffffffff8171fdd8>] usb_disable_lpm+0xa8/0xc0 [<ffffffff8171fe1c>] usb_unlocked_disable_lpm+0x2c/0x50 [<ffffffff81723933>] usb_reset_and_verify_device+0xc3/0x710 [<ffffffff8172c4ed>] ? usb_sg_wait+0x13d/0x190 [<ffffffff81724743>] usb_reset_device+0x133/0x280 [<ffffffff8179ccd1>] usb_stor_port_reset+0x61/0x70 [<ffffffff8179cd68>] usb_stor_invoke_transport+0x88/0x520 Signed-off-by: Du, Changbin <changbin.du@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24cdc-acm:exclude Samsung phone 04e8:685dOliver Neukum
This phone needs to be handled by a specialised firmware tool and is reported to crash irrevocably if cdc-acm takes it. Signed-off-by: Oliver Neukum <oneukum@suse.com> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb: cdc-acm: send zero packet for intel 7260 modemLu Baolu
For Intel 7260 modem, it is needed for host side to send zero packet if the BULK OUT size is equal to USB endpoint max packet length. Otherwise, modem side may still wait for more data and cannot give response to host side. Signed-off-by: Konrad Leszczynski <konrad.leszczynski@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb: cdc-acm: handle unlinked urb in acm read callbackLu Baolu
In current acm driver, the bulk-in callback function ignores the URBs unlinked in usb core. This causes unexpected data loss in some cases. For example, runtime suspend entry will unlinked all urbs and set urb->status to -ENOENT even those urbs might have data not processed yet. Hence, data loss occurs. This patch lets bulk-in callback function handle unlinked urbs to avoid data loss. Signed-off-by: Tang Jian Qiang <jianqiang.tang@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable@vger.kernel.org Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb-misc: sisusbvga: fix error pathPeter Senna Tschudin
Remove a call to dev_err() that was reporting an unsuccesful call to kmalloc(), as reporting memory allocation failures is redundant. Instead of logging the error, clean up previously allocated resources and abort the probe with -ENOMEM. Before this change sisusb->SiS_Pr could be dereferenced even if null after failure of memory allocation. Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb-misc: sisusbvga: Remove memory allocation logsPeter Senna Tschudin
This patch remove three calls to dev_err() from sisusb_probe() as reporting memory allocation failures is redundant: - Remove a call to dev_err() that was reporting unsuccesful call to kzalloc(). - Remove two calls to dev_err() that were reporting unsuccesful calls to kmalloc(). One call to dev_err() reporting memory allocation is left unchanged as the last patch of the series removes it. Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb-misc: sisusbvga: Remove null test before calls to kfree()Peter Senna Tschudin
This patch removes null test before calls to kfree() as kfree() can handle null pointers safely. Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb-misc: sisusbvga: Fix coding style: remove assignment from if testsPeter Senna Tschudin
The file drivers/usb/misc/sisusbvga/sisusb.c had 6 assignments inside if tests. This patch move the assignment outside the test. The changes also fix the remaining 2 lines that were over 80 characters. Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb-misc: sisusbvga: Fix coding style: braces, parenthesis, commentPeter Senna Tschudin
The file drivers/usb/misc/sisusbvga/sisusb.c contained coding style issues reported by checkpatch. This patch fixes the following errors: - 12 WARNING: braces {} are not necessary for single statement blocks - 04 ERROR: return is not a function, parentheses are not required - 03 ERROR: do not initialise statics to 0 - 1 WARNING: else is not generally useful after a break or return - 1 WARNING: braces {} are not necessary for any arm of this statement - 1 WARNING: Block comments use * on subsequent lines One case in which braces are not necessary is left unchanged as other patch of the series will fix it. Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb-misc: sisusbvga: Fix coding style: vertical whitespace changesPeter Senna Tschudin
This patch fixes whitespace coding style issues that can't be fixed without adding newlines. This patch fixes the following checkpatch warnings: - 20 ERROR: trailing statements should be on next line - 15 WARNING: line over 80 characters - 03 WARNING: Missing a blank line after declarations - 01 ERROR: space required after that ',' Five lines over 80 characters are left. The first three wont change as the fix would require split the cast and variable name in different lines which makes the code less readable. The last two will be fixed by other patch in the series. Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb-misc: sisusbvga: Fix coding style: horizontal whitespace changesPeter Senna Tschudin
This patch fixes whitespace coding style issues that can be fixed within a single line. This patch fixes the following checkpatch warnings: - 83 ERROR: space required after that ',' - 13 ERROR: switch and case should be at the same indent - 08 WARNING: please, no spaces at the start of a line - 03 ERROR: space required before the open parenthesis '(' - 04 WARNING: suspect code indent for conditional statements - 01 WARNING: space prohibited between function name and open parenthesis - 01 ERROR: spaces required around that '=' - 01 ERROR: code indent should use tabs where possible Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24USB: host: use to_platform_deviceGeliang Tang
Use to_platform_device() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24USB: core, wusbcore: use bus_to_hcdGeliang Tang
Use bus_to_hcd() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24USB: core, devio: use to_usb_deviceGeliang Tang
Use to_usb_device() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24USB: uas: add full support for RESPONSE IUOliver Neukum
Some devices send response IUs when you'd expect a sense IU. As a response to a wrong LUN that is within spec. We cannot get away without handling for response IUs. This version fixes the issues Hans raised. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb: gadget: rndis: use list_for_each_entry_safeGeliang Tang
Use list_for_each_entry_safe() instead of list_for_each_safe() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb: chipidea: debug: use list_for_each_entryGeliang Tang
Use list_for_each_entry() instead of list_for_each() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb: host: u132-hcd: use list_for_each_entryGeliang Tang
Use list_for_each_entry() instead of list_for_each() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb: host: oxu210hp-hcd: use list_for_each_entry_safeGeliang Tang
Use list_for_each_entry_safe() instead of list_for_each_safe() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb: host: max3421-hcd: use list_for_each_entry*Geliang Tang
Use list_for_each_entry*() instead of list_for_each*() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb: host: fotg210: use list_for_each_entry_safeGeliang Tang
Use list_for_each_entry_safe() instead of list_for_each_safe() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24ehci-hcd: Disable memory-write-invalidate when the driver is removedJia-Ju Bai
The driver calls pci_set_mwi to enable memory-write-invalidate when it is initialized, but does not call pci_clear_mwi when it is removed. Many other drivers calls pci_clear_mwi when pci_set_mwi is called, such as r8169, 8139cp and e1000. This patch adds a function "ehci_pci_remove" to remove the pci driver. This function calls pci_clear_mwi and usb_hcd_pci_remove, which can fix the problem. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24ehci-hcd: Cleanup memory resources when ehci_halt failsJia-Ju Bai
The driver calls ehci_mem_init to allocate memory resources. But these resources are not freed when ehci_halt fails. This patch adds "ehci_mem_cleanup" in error handling code to fix this problem. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb: host: ehci-msm: Register usb shutdown functionAzriel Samson
Registering usb_hcd_platform_shutdown to be called during shutdown. This is a generic function that performs the generic host stack's shutdown. It ensures that USB operations do not continue while kexec boots a new kernel. Signed-off-by: Azriel Samson <asamson@codeaurora.org> Signed-off-by: Timur Tabi <timur@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb: host: ehci-msm: Fix register initializationJack Pham
The default value for the 'transceiver select' field of the PORTSC register may not always be correct. Previously the phy-msm-usb driver would do this for us, but since ehci-msm can now be instantiated standalone without any PHY driver, the register needs to be explicitly initialized to ULPI mode to properly communicate with the PHY. This is not readily apparent, as firmware or bootloader code also happen to pre-initialize this for us. However, it can manifest when performing a driver unbind/rebind as follows: cd /sys/bus/platform/drivers/msm_hsusb_host echo QCOM8040:00 > unbind echo QCOM8040:00 > bind The EHCI core executes a controller reset as part of this, and as a result the register in question would revert to its default state and must be re-initialized properly. Furthermore this may be useful in the future when adding PM suspend/resume support. Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Timur Tabi <timur@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb: host: ehci-msm: Add support for ACPI probingJack Pham
Allow the EHCI MSM driver to probe against an ACPI enumerated device with ID QCOM8040. Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Timur Tabi <timur@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb: host: ehci-msm: Remove dependency on OTG PHYJack Pham
Currently the EHCI MSM driver has a hard dependency to be created by an OTG layer, namely the phy-msm-usb driver. In some cases or board configurations we want to allow the EHCI host to be instantiated without OTG capability. Instead, relax the dependency on having an OTG PHY being present and call usb_add_hcd() directly. Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Timur Tabi <timur@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb: host: ehci-msm: Allow LS devices to workJack Pham
Disable the silicon quirk which is normally enabled for HSIC host mode. This would otherwise prevent low speed devices from enumerating properly. Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24USB: bcma: separate code initializing USB 2.0 coreRafał Miłecki
This splits one big probing function into two smaller ones. The main one is now responsible for the generic stuff: allocating memory & enabling power using GPIO. The new one contains code that is specific to the USB 2.0 bcma core. This will allow adding support for the USB 3.0 bcma core (handling XHCI) in the future. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24USB: bcma: make helper creating platform dev more genericRafał Miłecki
Having "bool ohci" argument in bcma_hcd_create_pdev function limited it to support two cases only (OHCI and EHCI) and put too much logic in it. Lets make caller pass all required data. This adds few extra arguments to the function call but will allow us to reuse this code and handle more cases in the future (e.g. add XHCI support). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb: core: use kbasename() instead of open-coded variantAndy Shevchenko
kbasename() helper is dedicated to find a last part of the filename or pathname. USB core uses open-coded variant of that helper. Replace some lines of code by kbasename() call. The current users do not have trailing slash and we are on the safe side to make such change. I dig a history of the code under question up and found the patch [1] that brought it along with the same to tty layer. The check for trailing slash looks like copy'n'paste thing and I consider it as redundant. [1] http://www.kernel.org/pub/linux/kernel//people/akpm/patches/2.5/2.5.69/2.5.69-mm3/broken-out/linus.patch Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24drivers/usb/host/fsl: Port USB EHCI host driver for LS102xASriram Dash
Change Power architecture specific APIs such as in_be32/out_be32 for registers read/write. Instead using ioread/writebe32 which are defined for power as well as arm architecture Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Sriram Dash <sriram.dash@freescale.com> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24drivers/usb/host: fsl: Set DMA_MASK of usb platform deviceSriram Dash
Set DMA_MASK of usb platform device properly. Signed-off-by: Sriram Dash <sriram.dash@freescale.com> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb: Support USB 3.1 extended port status requestMathias Nyman
usb 3.1 extend the hub get-port-status request by adding different request types. the new request types return 4 additional bytes called extended port status, these bytes are returned after the regular portstatus and portchange values. The extended port status contains a speed ID for the currently used sublink speed. A table of supported Speed IDs with details about the link is provided by the hub in the device descriptor BOS SuperSpeedPlus device capability Sublink Speed Attributes. Support this new request. Ask for the extended port status after port reset if hub supports USB 3.1. If link is running at SuperSpeedPlus set the device speed to USB_SPEED_SUPER_PLUS Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb: add device descriptor for usb 3.1 root hubMathias Nyman
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb: show speed "10000" in sysfs for USB 3.1 SuperSpeedPlus devicesMathias Nyman
The same way as SuperSpeed devices show "5000" as device speed we wan't to show "10000" as the default speed for SuperSpeedPlus devices in sysfs. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb: set USB 3.1 roothub device speed to USB_SPEED_SUPER_PLUSMathias Nyman
A hcd roothub that supports HCD_USB31 is running at SuperSpeedPlus speed Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devicesMathias Nyman
Add a new USB_SPEED_SUPER_PLUS device speed, and make sure usb core can handle the new speed. In most cases the behaviour is the same as with USB_SPEED_SUPER SuperSpeed devices. In a few places we add a "Plus" string to inform the user of the new speed. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-26 08:57:26 +0000