| Age | Commit message (Collapse) | Author |
|---|
|
Since we have a common P2SB accessor in tree we may use it instead of
open coded variants.
Replace custom code by p2sb_bar() call.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM SoC updates from Arnd Bergmann:
"This is the second part of the general SoC updates, containing
everything that did not make it in the initial pull request, or that
came in as a bugfix later.
- Devicetree updates for SoCFPGA, ASPEED, AT91 and Rockchip,
including a new machine using an ASPEED BMC.
- More DT fixes from Krzysztof Kozlowski across platforms
- A new SoC platform for the GXP baseboard management controller,
used in current server products from HPE"
* tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (56 commits)
ARM: configs: Enable more audio support for i.MX
tee: optee: Pass a pointer to virt_addr_valid()
arm64: dts: rockchip: rename Quartz64-A bluetooth gpios
arm64: dts: rockchip: add clocks property to cru node rk3368
arm64: dts: rockchip: add clocks property to cru node rk3308
arm64: dts: rockchip: add clocks to rk356x cru
ARM: dts: rockchip: add clocks property to cru node rk3228
ARM: dts: rockchip: add clocks property to cru node rk3036
ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188
ARM: dts: rockchip: add clocks property to cru node rk3288
ARM: dts: rockchip: Remove "amba" bus nodes from rv1108
ARM: dts: rockchip: add clocks property to cru node rv1108
arm64: dts: sprd: use new 'dma-channels' property
ARM: dts: da850: use new 'dma-channels' property
ARM: dts: pxa: use new 'dma-channels/requests' properties
soc: ixp4xx/qmgr: Fix unused match warning
ARM: ep93xx: Make ts72xx_register_flash() static
ARM: configs: enable support for Kontron KSwitch D10
ep93xx: clock: Do not return the address of the freed memory
arm64: dts: intel: add device tree for n6000
...
|
|
This is a driver for the standard WDT on the RZ/N1 devices. This WDT has
very limited timeout capabilities. However, it can reset the device.
To do so, the corresponding bits in the SysCtrl RSTEN register need to
be enabled. This is not done by this driver.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220427135531.708279-3-jjhiblot@traphandler.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add support for the HPE GXP Watchdog. The GXP asic contains a full
complement of timers one of which is the watchdog timer. The watchdog
timer is 16 bit and has 10ms resolution. The watchdog is created as a
child device of timer since the same register range is used.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
|
|
Sunplus SP7021 requires watchdog timer support.
Add watchdog driver to enable this.
Signed-off-by: Xiantao Hu <xt.hu@cqplus1.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220324031805.61316-3-xt.hu@cqplus1.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add support for BCM4908
- renesas_wdt: add R-Car Gen4 support
- improve watchdog_dev function documentation
- sp5100_tco: replace the cd6h/cd7h port I/O with MMIO accesses during
initialization
- several other small improvements and fixes
* tag 'linux-watchdog-5.18-rc1' of git://www.linux-watchdog.org/linux-watchdog:
Watchdog: sp5100_tco: Enable Family 17h+ CPUs
Watchdog: sp5100_tco: Add initialization using EFCH MMIO
Watchdog: sp5100_tco: Refactor MMIO base address initialization
Watchdog: sp5100_tco: Move timer initialization into function
watchdog: ixp4xx: Implement restart
watchdog: orion_wdt: support pretimeout on Armada-XP
watchdog: allow building BCM7038_WDT for BCM4908
watchdog: renesas_wdt: Add R-Car Gen4 support
dt-bindings: watchdog: renesas-wdt: Document r8a779f0 support
watchdog: Improve watchdog_dev function documentation
watchdog: aspeed: add nowayout support
watchdog: rti-wdt: Add missing pm_runtime_disable() in probe function
watchdog: imx2_wdg: Alow ping on suspend
|
|
BCM4908 is a SoCs family that shares a lot of hardware with BCM63xx
including the watchdog block. Allow building this driver for it.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220209203202.26395-1-zajec5@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Maxim MAX77714 PMIC
Removed Drivers:
- Remove support for ST-Ericsson AB8500 DebugFS
New Device Support:
- Add support for Silergy SY7636A to Simple MFD I2C
- Add support for MediaTek MT6366 PMIC to MT6358 IRQ
- Add support for Charger to Intel PMIC CRC
- Add support for Raptor Lake to Intel LPSS PCI
New Functionality:
- Add support for Reboot to Rockchip RK808
Fix-ups:
- Device Tree changes (includcing YAML conversion) for
silergy,sy7636a, maxim,max77843, google,cros-ec, maxim,max14577,
maxim,max77802, maxim,max77714, qcom,tcsr, qcom,spmi-pmic,
stericsson,ab8500, stericsson,db8500-prcmu,
samsung,exynos5433-lpass, mt6397, syscon, brcm,cru
- Visible to menuconfig; simple-mfd-i2c
- Clean-up or clarify code; max77686, intel_soc_pmic_crc
- Improve error handling; mc13xxx-core, stmfx, asic3
- Pass device information to child devices; iqs62x, intel-lpss-acpi
- Individually identify IRQ domains; intel_soc_pmic_core
- Remove superfluous code; dbx500-prcmu, exynos-lpass
- Staticify and constify; arizona-i2c
- Mark sometimes used data as __maybe_unused; atmel-flexcom
- Account for different ACPI tables on AOSP/Windows platforms; arizona-spi
- Use provided (platform) APIs; ab8500-core
- Trivial (whitespace, spelling); rohm-bd9576"
* tag 'mfd-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (50 commits)
dt-bindings: mfd: syscon: Add microchip,lan966x-cpu-syscon compatible
mfd: bd9576: fix typos in comments
mfd: Use platform_get_irq() to get the interrupt
mfd: db8500-prcmu: Remove unused inline function
mfd: arizona-spi: Add Android board ACPI table handling
mfd: arizona-spi: Split Windows ACPI init code into its own function
mfd: asic3: Add missing iounmap() on error asic3_mfd_probe
MAINTAINERS: Rectify entry for ROHM MULTIFUNCTION BD9571MWV-M PMIC DEVICE DRIVERS
mfd: intel-lpss: Provide an SSP type to the driver
dt-bindings: mfd: brcm,cru: Rename pinctrl node
dt-bindings: Add compatibles for undocumented trivial syscons
mfd: atmel-flexcom: Fix compilation warning
dt-bindings: mfd: Add compatible for the MediaTek MT6366 PMIC
dt-bindings: mfd: samsung,exynos5433-lpass: Convert to dtschema
mfd: exynos-lpass: Drop unneeded syscon.h include
mfd: intel-lpss: Add Intel Raptor Lake PCH-S PCI IDs
mfd: ab8500: Drop debugfs module
mfd: sta2x11: Use GFP_KERNEL instead of GFP_ATOMIC
mfd: ab8500: Rewrite bindings in YAML
mfd: qcom-spmi-pmic: Add pm8953 compatible
...
|
|
The MAX77714 is a MFD chip whose watchdog has the same programming
procedures as the MAX77620 watchdog, but most register offsets and bit
masks are different, as well as some features.
Support the MAX77714 watchdog by adding a variant description table holding
the differences.
All the features implemented by this driver are available on the MAX77714
except for the lack of a WDTOFFC bit. Instead of using a "HAS_*" flag we
handle this by holding in the cnfg_glbl2_cfg_bits struct field the bits
(i.e. the features) to enable in the CNFG_GLBL2 register. These bits differ
among the two models. This implementation allows to avoid any conditional
code, keeping the execution flow unchanged.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
No (active) developer owns this hardware, so let's remove Linux support.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- New device support:
- Watchdog Timer driver for RZ/G2L
- Realtek Otto watchdog timer
- Apple SoC watchdog driver
- Fintek F81966
- Remove BCM63XX_WDT after support for this SoC was added to
BCM7038_WDT
- Improvements of the BCM7038_WDT and s3c2410_wdt code
- Several other fixes and improvements
* tag 'linux-watchdog-5.17-rc1' of git://www.linux-watchdog.org/linux-watchdog: (38 commits)
watchdog: msc313e: Check if the WDT was running at boot
watchdog: Add Apple SoC watchdog driver
dt-bindings: watchdog: Add SM6350 and SM8250 compatible
watchdog: s3c2410: Fix getting the optional clock
watchdog: s3c2410: Use platform_get_irq() to get the interrupt
dt-bindings: watchdog: atmel: Add missing 'interrupts' property
watchdog: mtk_wdt: use platform_get_irq_optional
watchdog: Add Watchdog Timer driver for RZ/G2L
dt-bindings: watchdog: renesas,wdt: Add support for RZ/G2L
watchdog: da9063: Add hard dependency on I2C
watchdog: Add Realtek Otto watchdog timer
dt-bindings: watchdog: Realtek Otto WDT binding
watchdog: s3c2410: Add Exynos850 support
watchdog: da9063: use atomic safe i2c transfer in reset handler
watchdog: davinci: Use div64_ul instead of do_div
watchdog: Remove BCM63XX_WDT
MIPS: BCM63XX: Provide platform data to watchdog device
watchdog: bcm7038_wdt: Add platform device id for bcm63xx-wdt
watchdog: Allow building BCM7038_WDT for BCM63XX
watchdog: bcm7038_wdt: Support platform data configuration
...
|
|
Add support for the watchdog timer found in Apple SoCs. This driver is
also required to reboot these machines.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211211123633.4392-2-sven@svenpeter.dev
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add Watchdog Timer driver for RZ/G2L SoC.
WDT IP block supports normal watchdog timer function and reset
request function due to CPU parity error.
This driver currently supports normal watchdog timer function
and later will add support for reset request function due to
CPU parity error.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211130195357.18626-3-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Commit 5ea29919c294 ("watchdog: da9063: use atomic safe i2c transfer in
reset handler") implements atomic save i2c transfer which uses i2c
functions directly. Add I2C hard dependency which overrides COMPILE_TEST.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 968011a291f3 ("watchdog: da9063: use atomic safe i2c transfer in reset handler")
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211129134938.3273289-1-andrej.picej@norik.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Realtek MIPS SoCs (platform name Otto) have a watchdog timer with
pretimeout notifitication support. The WDT can (partially) hard reset,
or soft reset the SoC.
This driver implements all features as described in the devicetree
binding, except the phase2 interrupt, and also functions as a restart
handler. The cpu reset mode is considered to be a "warm" restart, since
this mode does not reset all peripherals. Being an embedded system
though, the "cpu" and "software" modes will still cause the bootloader
to run on restart.
It is not known how a forced system reset can be disabled on the
supported platforms. This means that the phase2 interrupt will only fire
at the same time as reset, so implementing phase2 is of little use.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/6d060bccbdcc709cfa79203485db85aad3c3beb5.1637252610.git.sander@svanheule.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Now that we can utilize the BCM7038_WDT driver, remove that one which
was not converted to the watchdog APIs. There are a couple of notable
differences with how the bcm7038_wdt driver proceeds:
- bcm63xx_wdt would register with the ad-hoc BCM63xx hardware timer API,
but this would only be used in order to catch the interrupt *before* a
SoC reset and make the kernel "die"
- bcm6xx_wdt would register a software timer and kick it every second in
order to pet the watchdog, thus offering a two step watchdog process.
This is not something that is brought over to the bcm7038_wdt as it is
deemed unnecessary. If user-space cannot pet the watchdog, but a
kernel timer can, the system is still in a bad shape anyway.
bcm7038_wdt is simpler in its behavior and behaves as a standard
watchdog driver and is not making use of any specific platform APIs,
therefore making it more maintainable and extensible.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211112224636.395101-8-f.fainelli@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
CONFIG_BCM63XX denotes the legacy MIPS-based DSL SoCs which utilize the
same piece of hardware as a watchdog, make it possible to select that
driver for those platforms.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211112224636.395101-5-f.fainelli@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Some entries indent their help text with 1 tab + 1 space or 1 tab only
instead of 1 tab + 2 spaces. Add the missing spaces.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211111225852.3128201-7-luca@lucaceresoli.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Enable CONFIG_MEDIATEK_WATCHDOG when ARCH_MEDIATEK is enabled.
On some platforms (e.g. mt8183-pumpkin), watchdog is enabled by
bootloader, so kernel driver needs to be enabled to avoid watchdog
firing and causing reboot part way through kernel boot.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211103230354.915658-1-khilman@baylibre.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
This driver adds initial support for several devices from Siemens. It is
based on a platform driver introduced in an earlier commit.
One of the supported machines does access a GPIO pin to enable the
watchdog. Here we poke GPIO memory because pinctrl does not come up.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211213120502.20661-4-henning.schild@siemens.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This driver is named after the ambition to support more SoCs than
the DB8500. Those were never produced, so cut down the scope and
rename the driver accordingly. Since the Kconfig for the watchdog
defaults to y this will still be built by default.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210922230947.1864357-2-linus.walleij@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Describe better which driver applies to which SoC, to make configuring
kernel for Samsung SoC easier.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210924132930.111443-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
TI AR7 Watchdog Timer is only build for 32bit.
Avoid error like:
In file included from drivers/watchdog/ar7_wdt.c:29:
./arch/mips/include/asm/mach-ar7/ar7.h: In function ‘ar7_is_titan’:
./arch/mips/include/asm/mach-ar7/ar7.h:111:24: error: implicit declaration of function ‘KSEG1ADDR’; did you mean ‘CKSEG1ADDR’? [-Werror=implicit-function-declaration]
111 | return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x24)) & 0xffff) ==
| ^~~~~~~~~
| CKSEG1ADDR
Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible")
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210907024904.4127611-1-liu.yun@linux.dev
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Migrating the driver lets us drop the watchdog misc device boilerplate
and reduces size by 285 lines. It also brings us support for new
functionality like CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED.
This incurs a slight backwards-compatibility break, because the new
kernel watchdog API doesn't support unloading modules for drivers
whose watchdog hardware is reported to be running.
This means following scenario will be no longer supported:
- BIOS has enabled watchdog
- Module is loaded and unloaded without opening watchdog
- module_exit is expected to succeed and disable watchdog HW
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/35d9dbf57b58c5f003cef31dc256ec2fec044524.1628525954.git-series.a.fatoum@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Commit 59d3ae9a5bf6 ("ARM: remove Intel iop33x and iop13xx support")
removes the config ARCH_IOP13XX in ./arch/arm/Kconfig.
Hence, since then, the corresponding iop watchdog timer driver is dead
code. Remove this dead driver.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Compiling sb_watchdog needs to clearly define SIBYTE_HDR_FEATURES.
In arch/mips/sibyte/Platform like:
cflags-$(CONFIG_SIBYTE_BCM112X) += \
-I$(srctree)/arch/mips/include/asm/mach-sibyte \
-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
Otherwise, SIBYTE_HDR_FEATURES is SIBYTE_HDR_FMASK_ALL.
SIBYTE_HDR_FMASK_ALL is mean:
#define SIBYTE_HDR_FMASK_ALL SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL \
| SIBYTE_HDR_FMASK_1480_ALL)
So, If not limited to CPU_SB1, we will get such an error:
arch/mips/include/asm/sibyte/bcm1480_scd.h:261: error: "M_SPC_CFG_CLEAR" redefined [-Werror]
arch/mips/include/asm/sibyte/bcm1480_scd.h:262: error: "M_SPC_CFG_ENABLE" redefined [-Werror]
Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible")
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This rewrites the IXP4xx watchdog driver as follows:
- Spawn the watchdog driver as a platform device from the timer
driver. It's one device in the hardware, and the fact that
Linux splits the handling into two different devices is
a Linux pecularity, and thus it becomes a Linux pecularity
to spawn a separate watchdog driver.
- Spawn the watchdog driver from the timer driver at probe().
This is well after the timer driver as actually registered and
started and we know the register base is available.
- Instead of looping back callbacks to the timer drivers for all
watchdog calls, pass the register base to the watchdog driver
and manage the registers there. The two drivers aren't even
interested in the same register so the spinlock is totally
surplus, delete it.
- Replace pretty much all of the content in the watchdog driver
with a simple, modern watchdog driver utilizing the watchdog
core instead of registering its own misc device and ioctl()
handling.
- Drop module parameters as the same already exist in the
watchdog core.
What remains is a slim elegant (IMO) watchdog driver using the
watchdog core, spawning from device tree or boardfile alike.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210726121214.2572836-1-linus.walleij@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The only known BD70528 use-cases are such that the PMIC is controlled
from separate MCU which is not running Linux. I am not aware of
any Linux driver users. Furthermore, it seems there is no demand for
this IC. Let's ease the maintenance burden and drop the driver. We can
always add it back if there is sudden need for it.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/994d2e374262c3f59f4465c03ef23d3116120778.1621937490.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
It adds a driver for the IP block handling the watchdog timer found for
Mstar MSC313e SoCs and newer.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Co-developed-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210611200801.52139-3-romain.perier@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
This adds the option to use a hrtimer to generate a watchdog pretimeout
event for hardware watchdogs that do not natively support watchdog
pretimeouts.
With this enabled, all watchdogs will appear to have pretimeout support
in userspace. If no pretimeout value is set, there will be no change in
the watchdog's behavior. If a pretimeout value is set for a specific
watchdog that does not have built-in pretimeout support, a timer will be
started that should fire at the specified time before the watchdog
timeout would occur. When the watchdog is successfully pinged, the timer
will be restarted. If the timer is allowed to fire it will generate a
pretimeout event. However because a software timer is used, it may not
be able to fire in every circumstance.
If the watchdog does support a pretimeout natively, that functionality
will be used instead of the hrtimer.
The general design of this feaure was inspired by the software watchdog,
specifically its own pretimeout implementation. However the software
watchdog and this feature are completely independent. They can be used
together; with or without CONFIG_SOFT_WATCHDOG_PRETIMEOUT enabled.
The main advantage of using the hrtimer pretimeout with a hardware
watchdog, compared to running the software watchdog with a hardware
watchdog, is that if the hardware watchdog driver is unable to ping the
watchdog (e.g. due to a bus or communication error), then the hrtimer
pretimeout would still fire whereas the software watchdog would not.
Signed-off-by: Curtis Klein <curtis.klein@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1612383090-27110-1-git-send-email-curtis.klein@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Commit 92c8c16f3457 ("powerpc/embedded6xx: Remove C2K board support")
removed the last selector of CONFIG_MV64X60.
Therefore CONFIG_MV64X60_WDT cannot be selected anymore and
can be removed.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/9c2952bcfaec3b1789909eaa36bbce2afbfab7ab.1616085654.git.christophe.leroy@csgroup.eu
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
s/thershold/threshold
Cc: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210401033209.9929-1-vee.khee.wong@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Change a non-working ftp: URL to https:.
Wrap long lines earlier.
Spell "IP" with capital letters.
Change "it`s" to "it's". The backtick (grave accent) is not an apostrophe.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-watchdog@vger.kernel.org
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210419000704.17745-1-rdunlap@infradead.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add Watchdog support for ROHM BD9576MUF and BD9573MUF PMICs which are
mainly used to power the R-Car series processors. The watchdog is
pinged using a GPIO and enabled using another GPIO. Additionally
watchdog time-out can be configured to HW prior starting the watchdog.
Watchdog timeout can be configured to detect only delayed ping or in
a window mode where also too fast pings are detected.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
"New drivers:
- Intel Keembay Soc
New chip versions:
- sun4i: Add H616 compatible string
- mt8192 wdt support
- more Rockchip compatibles to snps,dw-wdt.yaml
- binding for Qcom SDX55
- r8a779a0 (V3U) support
Removed drivers:
- sirf prima watchdog driver
- sirf atlas watchdog driver
- zte zx watchdog driver
- tango watchdog driver
- coh901 watchdog driver
And several fixes and clean-ups"
* tag 'linux-watchdog-5.12-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits)
watchdog: qcom: Remove incorrect usage of QCOM_WDT_ENABLE_IRQ
watchdog: mei_wdt: request stop on unregister
dt-bindings: watchdog: Add binding for Qcom SDX55
watchdog: remove coh901 driver
watchdog: remove tango driver
watchdog: remove zte zx driver
watchdog: remove sirf atlas driver
watchdog: remove sirf prima driver
watchdog: mt8192: add wdt support
dt-binding: mt8192: add toprgu reset-controller head file
dt-binding: mediatek: mt8192: update mtk-wdt document
dt-binding: mediatek: watchdog: fix the description of compatible
dt-binding: watchdog: add more Rockchip compatibles to snps,dw-wdt.yaml
dt-bindings: watchdog: sun4i: Add H616 compatible string
watchdog: mtk_wdt: Remove mtk_wdt_stop() in probe() to prevent the system freeze and it doesn't reboot by watchdog problem
watchdog: renesas_wdt: add grace period before rebooting
watchdog: stop wdd when watchdog hw running in reboot_notifier
watchdog: ziirave_wdt: remove unused including <linux/version.h>
dt-bindings: watchdog: renesas,wdt: add r8a779a0 (V3U) support
watchdog: renesas_wdt: don't sleep in atomic context
...
|
|
The ST-Ericsson U300 platform is getting removed, so this driver is no
longer needed.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210120162745.61268-6-arnd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The tango platform is getting removed, so the driver is no
longer needed.
Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
Cc: Mans Rullgard <mans@mansr.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mans Rullgard <mans@mansr.com>
Link: https://lore.kernel.org/r/20210120162745.61268-5-arnd@kernel.org
[groeck: Removed devicetree bindings]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The zte zx platform is getting removed, so this driver is no
longer needed.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210120162745.61268-4-arnd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The CSR SiRF prima2/atlas platforms are getting removed, so this driver
is no longer needed.
Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Barry Song <baohua@kernel.org>
Link: https://lore.kernel.org/r/20210120162745.61268-3-arnd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The CSR SiRF prima2/atlas platforms are getting removed, so this driver
is no longer needed.
Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Barry Song <baohua@kernel.org>
Link: https://lore.kernel.org/r/20210120162745.61268-2-arnd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Intel Keembay Soc requires watchdog timer support.
Add watchdog driver to enable this.
Acked-by: Mark Gross <mgross@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/26d74f46ce74488424371dd3e16aa38508fa6c2e.1608141131.git.vijayakannan.ayyathurai@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc130 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Removal of the pnx83xx driver
- Add a binding for A100's watchdog controller
- Add Rockchip compatibles to snps,dw-wdt.yaml
- hpwdt: Disable NMI in Crash Kernel
- Fix potential dereferencing of null pointer in watchdog_core
- Several other small fixes and improvements
* tag 'linux-watchdog-5.11-rc1' of git://www.linux-watchdog.org/linux-watchdog: (23 commits)
watchdog: convert comma to semicolon
watchdog: iTCO_wdt: use dev_*() instead of pr_*() for logging
dt-binding: watchdog: add Rockchip compatibles to snps,dw-wdt.yaml
watchdog: coh901327: add COMMON_CLK dependency
dt-bindings: watchdog: sun4i: Add A100 compatible
watchdog: qcom: Avoid context switch in restart handler
watchdog: iTCO_wdt: use module_platform_device() macro
watchdog: Fix potential dereferencing of null pointer
watchdog: wdat_wdt: Fix missing kerneldoc reported by W=1
watchdog/hpwdt: Reflect changes
watchdog/hpwdt: Disable NMI in Crash Kernel
wdt: sp805: add watchdog_stop on reboot
watchdog: sbc_fitpc2_wdt: add __user annotations
watchdog: geodewdt: remove unneeded break
watchdog: rti-wdt: fix reference leak in rti_wdt_probe
watchdog: qcom_wdt: set WDOG_HW_RUNNING bit when appropriate
watchdog: remove pnx83xx driver
watchdog: stm32_iwdg: don't print an error on probe deferral
watchdog: sprd: change to use usleep_range() instead of busy loop
watchdog: sprd: check busy bit before new loading rather than after that
...
|
|
clang produces a build failure in configurations without COMMON_CLK
when a timeout calculation goes wrong:
arm-linux-gnueabi-ld: drivers/watchdog/coh901327_wdt.o: in function `coh901327_enable':
coh901327_wdt.c:(.text+0x50): undefined reference to `__bad_udelay'
Add a Kconfig dependency to only do build testing when COMMON_CLK
is enabled.
Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201203223358.1269372-1-arnd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Commit 625326ea9c84 ("MIPS: Remove PNX833x alias NXP_STB22x") removed
support for PNX833x, so it's time to remove watchdog driver, too.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201106130508.103598-1-tsbogend@alpha.franken.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
If HAS_IOMEM is not defined and SIRFSOC_WATCHDOG is enabled,
the build fails with the following error.
drivers/watchdog/sirfsoc_wdt.o: in function `sirfsoc_wdt_probe':
sirfsoc_wdt.c:(.text+0x112):
undefined reference to `devm_platform_ioremap_resource'
Reported-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible")
Link: https://lore.kernel.org/r/20201108162550.27660-2-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The following kbuild warning is seen on a system without HAS_IOMEM.
WARNING: unmet direct dependencies detected for MFD_SYSCON
Depends on [n]: HAS_IOMEM [=n]
Selected by [y]:
- ARMADA_37XX_WATCHDOG [=y] && WATCHDOG [=y] && (ARCH_MVEBU || COMPILE_TEST
This results in a subsequent compile error.
drivers/watchdog/armada_37xx_wdt.o: in function `armada_37xx_wdt_probe':
armada_37xx_wdt.c:(.text+0xdc): undefined reference to `devm_ioremap'
Add the missing dependency.
Reported-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Fixes: 54e3d9b518c8 ("watchdog: Add support for Armada 37xx CPU watchdog")
Link: https://lore.kernel.org/r/20201108162550.27660-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Russell said that he is no longer using this machine, and it seems that
nobody else has in a long time, so it's time to say goodbye to it.
As this is the last platform using CONFIG_ARCH_USES_GETTIMEOFFSET,
there are some follow-up patches to remove that as well.
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Pull ARM SoC platform updates from Olof Johansson:
"SoC changes, a substantial part of this is cleanup of some of the
older platforms that used to have a bunch of board files.
In particular:
- Remove non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP
platforms, moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
There are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones are:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
ARM: mstar: Select MStar intc
ARM: stm32: Replace HTTP links with HTTPS ones
ARM: debug: add UART early console support for SD5203
ARM: hisi: add support for SD5203 SoC
ARM: omap3: enable off mode automatically
clk: imx: imx35: Remove mx35_clocks_init()
clk: imx: imx31: Remove mx31_clocks_init()
clk: imx: imx27: Remove mx27_clocks_init()
ARM: imx: Remove unused definitions
ARM: imx35: Retrieve the IIM base address from devicetree
ARM: imx3: Retrieve the AVIC base address from devicetree
ARM: imx3: Retrieve the CCM base address from devicetree
ARM: imx31: Retrieve the IIM base address from devicetree
ARM: imx27: Retrieve the CCM base address from devicetree
ARM: imx27: Retrieve the SYSCTRL base address from devicetree
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: imx: Remove remnant board file support pieces
...
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add Toshiba Visconti watchdog driver
- it87_wdt: add IT8772 + IT8784
- several fixes and improvements
* tag 'linux-watchdog-5.10-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: Add Toshiba Visconti watchdog driver
watchdog: bindings: Add binding documentation for Toshiba Visconti watchdog device
watchdog: it87_wdt: add IT8784 ID
watchdog: sp5100_tco: Enable watchdog on Family 17h devices if disabled
watchdog: sp5100: Fix definition of EFCH_PM_DECODEEN3
watchdog: renesas_wdt: support handover from bootloader
watchdog: imx7ulp: Watchdog should continue running for wait/stop mode
watchdog: rti: Simplify with dev_err_probe()
watchdog: davinci: Simplify with dev_err_probe()
watchdog: cadence: Simplify with dev_err_probe()
watchdog: remove unneeded inclusion of <uapi/linux/sched/types.h>
watchdog: Use put_device on error
watchdog: Fix memleak in watchdog_cdev_register
watchdog: imx7ulp: Strictly follow the sequence for wdog operations
watchdog: it87_wdt: add IT8772 ID
watchdog: pcwd_usb: Avoid GFP_ATOMIC where it is not needed
drivers: watchdog: rdc321x_wdt: Fix race condition bugs
|
