summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-01-20Merge tag 'v5.5-rc7' into efi/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-19drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU listsAmol Grover
inst->handles is traversed using list_for_each_entry_rcu outside an RCU read-side critical section but under the protection of knav_dev_lock. Hence, add corresponding lockdep expression to silence false-positive lockdep warnings, and harden RCU lists. Add macro for the corresponding lockdep expression. Link: https://lore.kernel.org/r/20200118042433.4968-1-frextrite@gmail.com Signed-off-by: Amol Grover <frextrite@gmail.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-20Merge tag 'drm-msm-next-2020-01-14' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next + sc7180 display + DSI support + a618 (sc7180) support + more UBWC (bandwidth compression) support + various cleanups to handle devices that use vs don't use zap fw, etc + usual random cleanups and fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGvv03ifuP0tp7-dmqZtr1iS=s8Vc=az8BNGtEoSMD-dkw@mail.gmail.com
2020-01-20Backmerge v5.5-rc7 into drm-nextDave Airlie
msm needs 5.5-rc4, go to the latest. Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-01-19ubi: Fix an error pointer dereference in error handling codeDan Carpenter
If "seen_pebs = init_seen(ubi);" fails then "seen_pebs" is an error pointer and we try to kfree() it which results in an Oops. This patch re-arranges the error handling so now it only frees things which have been allocated successfully. Fixes: daef3dd1f0ae ("UBI: Fastmap: Add self check to detect absent PEBs") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-01-19Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
2020-01-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix non-blocking connect() in x25, from Martin Schiller. 2) Fix spurious decryption errors in kTLS, from Jakub Kicinski. 3) Netfilter use-after-free in mtype_destroy(), from Cong Wang. 4) Limit size of TSO packets properly in lan78xx driver, from Eric Dumazet. 5) r8152 probe needs an endpoint sanity check, from Johan Hovold. 6) Prevent looping in tcp_bpf_unhash() during sockmap/tls free, from John Fastabend. 7) hns3 needs short frames padded on transmit, from Yunsheng Lin. 8) Fix netfilter ICMP header corruption, from Eyal Birger. 9) Fix soft lockup when low on memory in hns3, from Yonglong Liu. 10) Fix NTUPLE firmware command failures in bnxt_en, from Michael Chan. 11) Fix memory leak in act_ctinfo, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits) cxgb4: reject overlapped queues in TC-MQPRIO offload cxgb4: fix Tx multi channel port rate limit net: sched: act_ctinfo: fix memory leak bnxt_en: Do not treat DSN (Digital Serial Number) read failure as fatal. bnxt_en: Fix ipv6 RFS filter matching logic. bnxt_en: Fix NTUPLE firmware command failures. net: systemport: Fixed queue mapping in internal ring map net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec net: dsa: sja1105: Don't error out on disabled ports with no phy-mode net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset net: hns: fix soft lockup when there is not enough memory net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key() net/sched: act_ife: initalize ife->metalist earlier netfilter: nat: fix ICMP header corruption on ICMP errors net: wan: lapbether.c: Use built-in RCU list checking netfilter: nf_tables: fix flowtable list del corruption netfilter: nf_tables: fix memory leak in nf_tables_parse_netdev_hooks() netfilter: nf_tables: remove WARN and add NLA_STRING upper limits netfilter: nft_tunnel: ERSPAN_VERSION must not be null netfilter: nft_tunnel: fix null-attribute check ...
2020-01-19Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Two runtime PM fixes and one leak fix" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: iop3xx: Fix memory leak in probe error path i2c: tegra: Properly disable runtime PM on driver's probe error i2c: tegra: Fix suspending in active runtime PM state
2020-01-19mlxsw: Add OVERLAY_SMAC_MC trapAmit Cohen
Add a trap for NVE packets that the device decided to drop because their overlay source MAC is multicast. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19mlxsw: Add tunnel devlink-trap supportAmit Cohen
Add the trap IDs and trap group used to report tunnel drops. Register tunnel packet traps and associated tunnel trap group with devlink during driver initialization. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19mlxsw: spectrum_trap: Reorder cases according to enum orderAmit Cohen
Move L3_DROPS case to appear after L2_DROPS case. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19mlxsw: Add ECN configurations with IPinIP tunnelsAmit Cohen
Initialize ECN mapping registers during router init according to INET_ECN_encapsulate() and INET_ECN_decapsulate(). For IP-in-IP encapsulation, this is required to ensure that ECN bits in the underlay are set in accordance with the kernel. For decapsulation, this is required to ensure that packets with invalid ECN combination in underlay and overlay are trapped to the kernel and not forwarded. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19mlxsw: reg: Add Tunneling IPinIP Decapsulation ECN Mapping RegisterAmit Cohen
This register configures the actions that are done during IPinIP decapsulation based on the ECN bits. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19mlxsw: reg: Add Tunneling IPinIP Encapsulation ECN Mapping RegisterAmit Cohen
This register performs mapping from overlay ECN to underlay ECN during IPinIP encapsulation. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19mlxsw: Add NON_ROUTABLE trapAmit Cohen
Add a trap for packets that the device decided to drop because they are not supposed to be routed. For example, IGMP queries can be flooded by the device in layer 2 and reach the router. Such packets should not be routed and instead dropped. Signed-off-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19mlxsw: Add irif and erif disabled trapsAmit Cohen
IRIF_DISABLED and ERIF_DISABLED are driver specific traps. Packets are dropped for these reasons when they need to be routed through/from existing router interfaces (RIF) which are disabled. Add devlink driver-specific traps and mlxsw trap IDs used to report these traps. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19Merge branch 'for-net-next' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 E-Switch chains and prios This series has two parts, 1) A merge commit with mlx5-next branch that include updates for mlx5 HW layouts needed for this and upcoming submissions. 2) From Paul, Increase the number of chains and prios Currently the Mellanox driver supports offloading tc rules that are defined on the first 4 chains and the first 16 priorities. The restriction stems from the firmware flow level enforcement requiring a flow table of a certain level to point to a flow table of a higher level. This limitation may be ignored by setting the ignore_flow_level bit when creating flow table entries. Use unmanaged tables and ignore flow level to create more tables than declared by fs_core steering. Manually manage the connections between the tables themselves. HW table is instantiated for every tc <chain,prio> tuple. The miss rule of every table either jumps to the next <chain,prio> table, or continues to slow_fdb. This logic is realized by following this sequence: 1. Create an auto-grouped flow table for the specified priority with reserved entries Reserved entries are allocated at the end of the flow table. Flow groups are evaluated in sequence and therefore it is guaranteed that the flow group defined on the last FTEs will be the last to evaluate. Define a "match all" flow group on the reserved entries, providing the platform to add table miss actions. 2. Set the miss rule action to jump to the next <chain,prio> table or the slow_fdb. 3. Link the previous priority table to point to the new table by updating its miss rule. Please pull and let me know if there's any problem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19cxgb4: reject overlapped queues in TC-MQPRIO offloadRahul Lakkireddy
A queue can't belong to multiple traffic classes. So, reject any such configuration that results in overlapped queues for a traffic class. Fixes: b1396c2bd675 ("cxgb4: parse and configure TC-MQPRIO offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19cxgb4: fix Tx multi channel port rate limitRahul Lakkireddy
T6 can support 2 egress traffic management channels per port to double the total number of traffic classes that can be configured. In this configuration, if the class belongs to the other channel, then all the queues must be bound again explicitly to the new class, for the rate limit parameters on the other channel to take effect. So, always explicitly bind all queues to the port rate limit traffic class, regardless of the traffic management channel that it belongs to. Also, only bind queues to port rate limit traffic class, if all the queues don't already belong to an existing different traffic class. Fixes: 4ec4762d8ec6 ("cxgb4: add TC-MATCHALL classifier egress offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19net: phy: adin: fix a warning about msleepDejin Zheng
found a warning by the following command: ./scripts/checkpatch.pl -f drivers/net/phy/adin.c WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.rst #628: FILE: drivers/net/phy/adin.c:628: + msleep(10); Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19net: dsa: felix: Allow PHY to AN 10/100/1000 with 2500 serdes linkAlex Marginean
If the serdes link is set to 2500 using interfce type 2500base-X, lower link speeds over on the line side should still be supported. Rate adaptation is done out of band, in our case using AQR PHYs this is done using flow control. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19net: dsa: felix: Handle PAUSE RX regardless of AN resultAlex Marginean
Flow control is used with 2500Base-X and AQR PHYs to do rate adaptation between line side 100/1000 links and MAC running at 2.5G. This is independent of the flow control configuration settled on line side though AN. In general, allowing the MAC to handle flow control even if not negotiated with the link partner should not be a problem, so the patch just enables it in all cases. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19Merge tag 'iio-for-5.6b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of new device support, features and minor fixes for IIO in the 5.6 cycle Just a small set this time. As we are very near the merge window, I've rolled a few fixes in here rather than adding noise just before release. A short delay here will do little harm. New device support * adis16480 - Add support for adis16490. After earlier rework this is simple ID plus chip info. Features * kxcjk1013 - mount matrix support. * lsm_6dsx - mount matrix support. Cleanups / minor or late breaking fixes * ad7124 - add support to ad-sigma-delta and use it in this driver to allow the the interrupt type to be IRQF_TRIGGER_LOW unlike most other devices using this framework. * adis - use delay structure now available in SPI to handle transfer delays - introduce a timeouts structure to allow support of new devices * ak8975 - drop platform data support. No one is using it and it adds complexity. - use device_get_match_data rather than open coding much the same thing. * dht11 - drop meaningless todo * at91-samad2_adc - switch to dma_request_chan * altas-sensor - add a helper function to compute number of channels. Needed for new device support that is under review. * bma400 - add a lower bound check on scale. * inv_mpu6050 - add support for temperature data in the fifos for all chips. - support an odd situation where a board supports only interrupt triggering on both edges. * st_lsm6dsx - check and handle potential error return. * st_sensors - fix some values for the LSM9DS0 which is ever so slightly different from other devices using the same whoami value. - switch over to generic functions from dt ones, avoiding need for separate ACPI support. * stm32-adc - switch to dma_request_chan - suppress an error print in deferred probe case. * stm32-dac - drop private data structure element for reset controller as only used in probe. - reflect more cleanly that the reset controller is optional whilst ensuring that if is specified any errors are caught. * stm32-dfsdm - switch to dma_request_chan - fix missing application of formatting to single conversions. - ensure the sampling rate is updated when the oversampling ratio is changed. * tag 'iio-for-5.6b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (29 commits) iio: dac: stm32-dac: better handle reset controller failures iio: dac: stm32-dac: use reset controller only at probe time dt-bindings: iio: accel: kxcjk1013: Document mount-matrix property iio: accel: kxcjk1013: Support orientation matrix iio: imu: st_lsm6dsx: add mount matrix support iio: adc: stm32-adc: don't print an error on probe deferral dt-bindings: iio: adis16480: add compatible entry for ADIS16490 iio: imu: adis16480: Add support for ADIS16490 iio: accel: bma400: prevent setting accel scale too low iio: imu/mpu6050: support dual-edge IRQ iio: imu: inv_mpu6050: add fifo temperature data support iio: magnetometer: ak8975: Convert to use device_get_match_data() iio: magnetometer: ak8975: Get rid of platform data iio: adc: ad7124: Set IRQ type to falling iio: adc: ad-sigma-delta: Allow custom IRQ flags iio: imu: adis: use new `delay` structure for SPI transfer delays iio: adc: stm32-dfsdm: adapt sampling rate to oversampling ratio iio: adc: stm32-dfsdm: fix single conversion iio: st_sensors: Make use of device properties iio: st_sensors: Drop redundant parameter from st_sensors_of_name_probe() ...
2020-01-19mtd: spi-nor: Add support for at25sl321Michael Walle
This was tested in single, dual and quad mode on a custom board with the NXP FlexSPI controller. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-01-19mtd: spi-nor: Add support for w25q32jwmMichael Walle
Add support for the Winbond W25Q32JW-xM flashes. These have a programmable QE bit. There is also the W25Q32JW-xQ variant which shares the ID with the W25Q32DW and W25Q32FW parts. The W25Q32JW-xQ has the QE bit hard strapped to 1, thus don't support the /HOLD and /WP pins. This was tested in single, dual and quad mode on a custom board with the NXP FlexSPI controller. Also the BP bits as well as the TB bit were tested. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-01-18Merge tag 'mtd/fixes-for-5.5-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fixes from Miquel Raynal: "Raw NAND: - GPMI: Fix the suspend/resume SPI-NOR: - Fix quad enable on Spansion like flashes - Fix selection of 4-byte addressing opcodes on Spansion" * tag 'mtd/fixes-for-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: gpmi: Restore nfc timing setup after suspend/resume mtd: rawnand: gpmi: Fix suspend/resume problem mtd: spi-nor: Fix quad enable for Spansion like flashes mtd: spi-nor: Fix selection of 4-byte addressing opcodes on Spansion
2020-01-18Merge tag 'drm-fixes-2020-01-19' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Back from LCA2020, fixes wasn't too busy last week, seems to have quieten down appropriately, some amdgpu, i915, then a core mst fix and one fix for virtio-gpu and one for rockchip: core mst: - serialize down messages and clear timeslots are on unplug amdgpu: - Update golden settings for renoir - eDP fix i915: - uAPI fix: Remove dash and colon from PMU names to comply with tools/perf - Fix for include file that was indirectly included - Two fixes to make sure VMA are marked active for error capture virtio: - maintain obj reservation lock when submitting cmds rockchip: - increase link rate var size to accommodate rates" * tag 'drm-fixes-2020-01-19' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: Reorder detect_edp_sink_caps before link settings read. drm/amdgpu: update goldensetting for renoir drm/dp_mst: Have DP_Tx send one msg at a time drm/dp_mst: clear time slots for ports invalid drm/i915/pmu: Do not use colons or dashes in PMU names drm/rockchip: fix integer type used for storing dp data rate drm/i915/gt: Mark ring->vma as active while pinned drm/i915/gt: Mark context->state vma as active while pinned drm/i915/gt: Skip trying to unbind in restore_ggtt_mappings drm/i915: Add missing include file <linux/math64.h> drm/virtio: add missing virtio_gpu_array_lock_resv call
2020-01-18Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Ingo Molnar: "Fix a recent regression in the Ingenic SoCs irqchip driver that floods the syslog" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/ingenic: Get rid of the legacy IRQ domain
2020-01-18Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "Three EFI fixes: - Fix a slow-boot-scrolling regression but making sure we use WC for EFI earlycon framebuffer mappings on x86 - Fix a mixed EFI mode boot crash - Disable paging explicitly before entering startup_32() in mixed mode bootup" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efistub: Disable paging at mixed mode entry efi/libstub/random: Initialize pointer variables to zero for mixed mode efi/earlycon: Fix write-combine mapping on x86
2020-01-18Merge tag 's390-5.5-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix printing misleading Secure-IPL enabled message when it is not. - Fix a race condition between host ap bus and guest ap bus doing device reset in crypto code. - Fix sanity check in CCA cipher key function (CCA AES cipher key support), which fails otherwise. * tag 's390-5.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/setup: Fix secure ipl message s390/zcrypt: move ap device reset from bus to driver code s390/zcrypt: Fix CCA cipher key gen with clear key value function
2020-01-18Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three fixes in drivers with no impact to core code. The mptfusion fix is enormous because the driver API had to be rethreaded to pass down the necessary iocp pointer, but once that's done a significant chunk of code is deleted. The other two patches are small" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mptfusion: Fix double fetch bug in ioctl scsi: storvsc: Correctly set number of hardware queues for IDE disk scsi: fnic: fix invalid stack access
2020-01-18Merge tag 'char-misc-5.5-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are some small fixes for 5.5-rc7 Included here are: - two lkdtm fixes - coresight build fix - Documentation update for the hw process document All of these have been in linux-next with no reported issues" * tag 'char-misc-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Documentation/process: Add Amazon contact for embargoed hardware issues lkdtm/bugs: fix build error in lkdtm_UNSET_SMEP lkdtm/bugs: Make double-fault test always available coresight: etm4x: Fix unused function warning
2020-01-18Merge tag 'staging-5.5-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver fixes from Greg KH: "Here are some small staging and iio driver fixes for 5.5-rc7 All of them are for some small reported issues. Nothing major, full details in the shortlog. All have been in linux-next with no reported issues" * tag 'staging-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: comedi: ni_routes: allow partial routing information staging: comedi: ni_routes: fix null dereference in ni_find_route_source() iio: light: vcnl4000: Fix scale for vcnl4040 iio: buffer: align the size of scan bytes to size of the largest element iio: chemical: pms7003: fix unmet triggered buffer dependency iio: imu: st_lsm6dsx: Fix selection of ST_LSM6DS3_ID iio: adc: ad7124: Fix DT channel configuration
2020-01-18Merge tag 'usb-5.5-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver fixes from Greg KH: "Here are some small USB driver and core fixes for 5.5-rc7 There's one fix for hub wakeup issues and a number of small usb-serial driver fixes and device id updates. The hub fix has been in linux-next for a while with no reported issues, and the usb-serial ones have all passed 0-day with no problems" * tag 'usb-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: quatech2: handle unbound ports USB: serial: keyspan: handle unbound ports USB: serial: io_edgeport: add missing active-port sanity check USB: serial: io_edgeport: handle unbound ports on URB completion USB: serial: ch341: handle unbound port at reset_resume USB: serial: suppress driver bind attributes USB: serial: option: add support for Quectel RM500Q in QDL mode usb: core: hub: Improved device recognition on remote wakeup USB: serial: opticon: fix control-message timeouts USB: serial: option: Add support for Quectel RM500Q USB: serial: simple: Add Motorola Solutions TETRA MTP3xxx and MTP85xx
2020-01-18iio: dac: stm32-dac: better handle reset controller failuresEtienne Carriere
Use devm_reset_control_get_optional_exclusive() instead of devm_reset_control_get_exclusive() as reset controller is optional. Nevertheless if reset controller is expected but reports an error, propagate the error code to the caller. In such case a nice error trace is emitted unless we're deferring the probe operation. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-01-18iio: dac: stm32-dac: use reset controller only at probe timeEtienne Carriere
This change removes the reset controller reference from the local DAC instance since it is used only at probe time. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-01-18iio: accel: kxcjk1013: Support orientation matrixDmitry Osipenko
Hardware could be physically mounted in any possible direction and userpspace needs to be aware of the mounting orientation in order to process sensor's data correctly. In particular this helps iio-sensor-proxy to report display's orientation properly on a phone/tablet devices. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-01-18iio: imu: st_lsm6dsx: add mount matrix supportMartin Kepplinger
Allow to read the mount-matrix device tree property and provide the mount_matrix file for userspace to read. Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-01-18iio: adc: stm32-adc: don't print an error on probe deferralEtienne Carriere
Do not print an error trace when deferring probe for some resource. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-01-18Merge tag 'soundwire-5.6-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next Vinod writes: soundwire updates for v5.6-rc1 This round we have bunch of updates to interfaces for ASoC (audio) subsystem by Intel and a new Qualcomm controller driver Details - Updates for sdw_slave interfaces for ASoC - Updates to cadence library and intel driver - New Soundwire controller for Qualcomm masters - Rework of device number assignment * tag 'soundwire-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (27 commits) dt-bindings: soundwire: fix example soundwire: cadence: fix kernel-doc parameter descriptions soundwire: intel: report slave_ids for each link to SOF driver soundwire: intel: fix factor of two in MCLK handling soundwire: bus: fix device number leak on errors soundwire: cadence: remove useless variable incrementation soundwire: cadence: update kernel-doc parameter descriptions soundwire: qcom: add support for SoundWire controller dt-bindings: soundwire: add bindings for Qcom controller soundwire: bus: check first if Slaves become UNATTACHED soundwire: cadence_master: handle multiple status reports per Slave soundwire: cadence_master: remove config update for interrupt setting soundwire: cadence_master: log more useful information during timeouts soundwire: cadence_master: clear interrupt status before enabling interrupt soundwire: cadence_master: filter out bad interrupts soundwire: stream: remove redundant pr_err traces soundwire: intel: add clock stop quirks soundwire: intel: add mutex for shared SHIM register access soundwire: intel: add prototype for WAKEEN interrupt processing soundwire: intel: add link_list to handle interrupts with a single thread ...
2020-01-18bnxt_en: Do not treat DSN (Digital Serial Number) read failure as fatal.Michael Chan
DSN read can fail, for example on a kdump kernel without PCIe extended config space support. If DSN read fails, don't set the BNXT_FLAG_DSN_VALID flag and continue loading. Check the flag to see if the stored DSN is valid before using it. Only VF reps creation should fail without valid DSN. Fixes: 03213a996531 ("bnxt: move bp->switch_id initialization to PF probe") Reported-by: Marc Smith <msmith626@gmail.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-18bnxt_en: Fix ipv6 RFS filter matching logic.Michael Chan
Fix bnxt_fltr_match() to match ipv6 source and destination addresses. The function currently only checks ipv4 addresses and will not work corrently on ipv6 filters. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-18bnxt_en: Fix NTUPLE firmware command failures.Michael Chan
The NTUPLE related firmware commands are sent to the wrong firmware channel, causing all these commands to fail on new firmware that supports the new firmware channel. Fix it by excluding the 3 NTUPLE firmware commands from the list for the new firmware channel. Fixes: 760b6d33410c ("bnxt_en: Add support for 2nd firmware message channel.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-18iio: imu: adis16480: Add support for ADIS16490Stefan Popa
The ADIS16490 is part of the same family with ADIS16495 and ADIS16497, the main difference is the temperature, accelerometer and gyroscope scales. Datasheet: Link: https://www.analog.com/media/en/technical-documentation/data-sheets/adis16490.pdf Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-01-18iio: accel: bma400: prevent setting accel scale too lowDan Carpenter
This puts an upper bound on "val2" but it also needs to have a lower bound (BMA400_SCALE_MIN). Fixes: 465c811f1f20 ("iio: accel: Add driver for the BMA400") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-01-18iio: imu/mpu6050: support dual-edge IRQMichał Mirosław
Make mpu6050 usable on platforms which provide only any-edge interrupts. One example of this kind of platform is AT91SAM9G45 Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-01-18iio: imu: inv_mpu6050: add fifo temperature data supportJean-Baptiste Maneyrol
Add support of temperature data in fifo for all chips. Enable unification of scan elements for icm20602. Add macros for generating scan elements. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-01-18iio: magnetometer: ak8975: Convert to use device_get_match_data()Andy Shevchenko
Convert to use device_get_match_data() instead of open coded variant. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-01-18iio: magnetometer: ak8975: Get rid of platform dataAndy Shevchenko
Since IIO framework supports device property API and driver has been moved already to the use of GPIO descriptors the logical continuation is to get rid of platform data completely. We are on the safe side here since there are no users of it in the kernel. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-01-18iio: adc: ad7124: Set IRQ type to fallingAlexandru Tachici
Ad7124 data-sheet specifies that the falling edge of the DOUT line should be used for an interrupt. The current irq flag (IRQF_TRIGGER_LOW) used will cause unwanted behaviour. When enabling the interrupt it will fire once because the DOUT line is already low. This will make the driver to read an unfinished conversion from the chip. This patch sets the irq type to the one specified in the data-sheet. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit (git 2.34.1) at 2025-09-24 07:06:01 +0000