summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-02-14drm/amd/display: fix dtm unloadingBhawanpreet Lakha
there was a type in the terminate command. We should be calling psp_dtm_unload() instead of psp_hdcp_unload() Fixes: 143f23053333 ("drm/amdgpu: psp DTM init") Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-14drm/amd/display: fix backwards byte order in rx_caps.Bhawanpreet Lakha
We were using incorrect byte order after we started using the drm_defines So fix it. Fixes: 02837a91ae75 ("drm/amd/display: add and use defines from drm_hdcp.h") Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-14nvme: fix the parameter order for nvme_get_log in nvme_get_fw_slot_infoYi Zhang
nvme fw-activate operation will get bellow warning log, fix it by update the parameter order [ 113.231513] nvme nvme0: Get FW SLOT INFO log error Fixes: 0e98719b0e4b ("nvme: simplify the API for getting log pages") Reported-by: Sujith Pandel <sujith_pandel@dell.com> Reviewed-by: David Milburn <dmilburn@redhat.com> Signed-off-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-14nvme/pci: move cqe check after device shutdownKeith Busch
Many users have reported nvme triggered irq_startup() warnings during shutdown. The driver uses the nvme queue's irq to synchronize scanning for completions, and enabling an interrupt affined to only offline CPUs triggers the alarming warning. Move the final CQE check to after disabling the device and all registered interrupts have been torn down so that we do not have any IRQ to synchronize. Link: https://bugzilla.kernel.org/show_bug.cgi?id=206509 Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-14nvme: prevent warning triggered by nvme_stop_keep_aliveNigel Kirkland
Delayed keep alive work is queued on system workqueue and may be cancelled via nvme_stop_keep_alive from nvme_reset_wq, nvme_fc_wq or nvme_wq. Check_flush_dependency detects mismatched attributes between the work-queue context used to cancel the keep alive work and system-wq. Specifically system-wq does not have the WQ_MEM_RECLAIM flag, whereas the contexts used to cancel keep alive work have WQ_MEM_RECLAIM flag. Example warning: workqueue: WQ_MEM_RECLAIM nvme-reset-wq:nvme_fc_reset_ctrl_work [nvme_fc] is flushing !WQ_MEM_RECLAIM events:nvme_keep_alive_work [nvme_core] To avoid the flags mismatch, delayed keep alive work is queued on nvme_wq. However this creates a secondary concern where work and a request to cancel that work may be in the same work queue - namely err_work in the rdma and tcp transports, which will want to flush/cancel the keep alive work which will now be on nvme_wq. After reviewing the transports, it looks like err_work can be moved to nvme_reset_wq. In fact that aligns them better with transition into RESETTING and performing related reset work in nvme_reset_wq. Change nvme-rdma and nvme-tcp to perform err_work in nvme_reset_wq. Signed-off-by: Nigel Kirkland <nigel.kirkland@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-14nvme/tcp: fix bug on double requeue when send failsAnton Eidelman
When nvme_tcp_io_work() fails to send to socket due to connection close/reset, error_recovery work is triggered from nvme_tcp_state_change() socket callback. This cancels all the active requests in the tagset, which requeues them. The failed request, however, was ended and thus requeued individually as well unless send returned -EPIPE. Another return code to be treated the same way is -ECONNRESET. Double requeue caused BUG_ON(blk_queued_rq(rq)) in blk_mq_requeue_request() from either the individual requeue of the failed request or the bulk requeue from blk_mq_tagset_busy_iter(, nvme_cancel_request, ); Signed-off-by: Anton Eidelman <anton@lightbitslabs.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-14net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples()Guangbin Huang
The IPv6 address defined in struct in6_addr is specified as big endian, but there is no specified endian in struct hclge_fd_rule_tuples, so it will cause a problem if directly use memcpy() to copy ipv6 address between these two structures since this field in struct hclge_fd_rule_tuples is little endian. This patch fixes this problem by using be32_to_cpu() to convert endian of IPv6 address of struct in6_addr before copying. Fixes: d93ed94fbeaf ("net: hns3: add aRFS support for PF") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net: hns3: fix VF bandwidth does not take effect in some caseYonglong Liu
When enabling 4 TC after setting the bandwidth of VF, the bandwidth of VF will resume to default value, because of the qset resources changed in this case. This patch fixes it by using a fixed VF's qset resources according to HNAE3_MAX_TC macro. Fixes: ee9e44248f52 ("net: hns3: add support for configuring bandwidth of VF on the host") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net: hns3: add management table after IMP resetYufeng Mo
In the current process, the management table is missing after the IMP reset. This patch adds the management table to the reset process. Fixes: f5aac71c0327 ("net: hns3: add manager table initialization for hardware") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq: Make cpufreq_global_kobject static
2020-02-14HID: i2c-hid: add Trekstor Surfbook E11B to descriptor overrideKai-Heng Feng
The Surfbook E11B uses the SIPODEV SP1064 touchpad, which does not supply descriptors, so it has to be added to the override list. BugLink: https://bugs.launchpad.net/bugs/1858299 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2020-02-14Merge tag 'drm-intel-next-fixes-2020-02-13' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.6-rc2 Most of these were aimed at a "next fixes" pull already during the merge window, but there were issues with the baseline I used, which resulted in a lot of issues in CI. I've regenerated this stuff piecemeal now, adding gradually to it, and it seems healthy now. Due to the issues this is much bigger than I'd like. But it was obviously necessary to take the time to ensure it's not garbage... Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/878sl6yfrn.fsf@intel.com
2020-02-14Merge tag 'amd-drm-fixes-5.6-2020-02-12' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.6-2020-02-12: amdgpu: - Additional OD fixes for navi - Misc display fixes - VCN 2.5 DPG fix - Prevent build errors on PowerPC on some configs - GDS EDC fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200212224746.3992-1-alexander.deucher@amd.com
2020-02-14Merge tag 'drm-misc-next-fixes-2020-02-07' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-next fixes for v5.6: - Fix build error in drm/edid. - Plug close-after-free race in vgem_gem_create. - Handle CONFIG_DMA_API_DEBUG_SG better in drm/msm. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/551b6183-a581-9d12-10a9-24cd929de425@linux.intel.com
2020-02-14Merge tag 'drm-misc-fixes-2020-02-07' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for v5.6: - Revert allow_fb_modifiers in sun4i, as it causes a regression for DE2 and DE3. - Fix null pointer deref in drm_dp_mst_process_up_req(). Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/672810c3-4212-0a46-337b-2cb855573fd2@linux.intel.com
2020-02-13Input: synaptics - remove the LEN0049 dmi id from topbuttonpad listBenjamin Tissoires
The Yoga 11e is using LEN0049, but it doesn't have a trackstick. Thus, there is no need to create a software top buttons row. However, it seems that the device works under SMBus, so keep it as part of the smbus_pnp_ids. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200115013023.9710-1-benjamin.tissoires@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-02-13Input: synaptics - enable SMBus on ThinkPad L470Gaurav Agrawal
Add touchpad LEN2044 to the list, as it is capable of working with psmouse.synaptics_intertouch=1 Signed-off-by: Gaurav Agrawal <agrawalgaurav@gnome.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/CADdtggVzVJq5gGNmFhKSz2MBwjTpdN5YVOdr4D3Hkkv=KZRc9g@mail.gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-02-13Input: synaptics - switch T470s to RMI4 by defaultLyude Paul
This supports RMI4 and everything seems to work, including the touchpad buttons. So, let's enable this by default. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200204194322.112638-1-lyude@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-02-13Input: gpio_keys - replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20200213002600.GA31916@embeddedor.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-02-13Input: goldfish_events - replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20200213002430.GA31056@embeddedor.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-02-13ACPI: watchdog: Set default timeout in probeMika Westerberg
If the BIOS default timeout for the watchdog is too small userspace may not have enough time to configure new timeout after opening the device before the system is already reset. For this reason program default timeout of 30 seconds in the driver probe and allow userspace to change this from command line or through module parameter (wdat_wdt.timeout). Reported-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-02-13ACPI: watchdog: Fix gas->access_width usageMika Westerberg
ACPI Generic Address Structure (GAS) access_width field is not in bytes as the driver seems to expect in few places so fix this by using the newly introduced macro ACPI_ACCESS_BYTE_WIDTH(). Fixes: b1abf6fc4982 ("ACPI / watchdog: Fix off-by-one error at resource assignment") Fixes: 058dfc767008 ("ACPI / watchdog: Add support for WDAT hardware watchdog") Reported-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Cc: 4.16+ <stable@vger.kernel.org> # 4.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-02-13Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Summary below, but it's all reasonably straightforward. There are some more fixes on the horizon, but nothing disastrous yet. Summary: - Fix build when KASLR is enabled but CONFIG_ARCH_RANDOM is not set - Fix context-switching of SSBS state on systems that implement it - Fix spinlock compiler warning introduced during the merge window - Fix incorrect header inclusion (linux/clk-provider.h) - Use SYSCTL_{ZERO,ONE} instead of rolling our own static variables - Don't scream if optional SMMUv3 PMU irq is missing - Remove some unused function prototypes" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: time: Replace <linux/clk-provider.h> by <linux/of_clk.h> arm64: Fix CONFIG_ARCH_RANDOM=n build perf/smmuv3: Use platform_get_irq_optional() for wired interrupt arm64/spinlock: fix a -Wunused-function warning arm64: ssbs: Fix context-switch when SSBS is present on all CPUs arm64: use shared sysctl constants arm64: Drop do_el0_ia_bp_hardening() & do_sp_pc_abort() declarations
2020-02-13Merge tag 'gpio-v5.6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: - Revert two patches to gpio_do_set_config() and implement the proper solution that works, also drop an unecessary call in set_config() - Fix up the lockdep class for hierarchical IRQ domains. - Remove some bridge code for line directions. - Fix a register access bug in the Xilinx driver. * tag 'gpio-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: sifive: fix static checker warning spmi: pmic-arb: Set lockdep class for hierarchical irq domains gpio: xilinx: Fix bug where the wrong GPIO register is written to gpiolib: remove unnecessary argument from set_config call gpio: bd71828: Remove unneeded defines for GPIO_LINE_DIRECTION_IN/OUT MAINTAINERS: Sort entries in database for GPIO gpiolib: fix gpio_do_set_config() Revert "gpiolib: remove set but not used variable 'config'" Revert "gpiolib: Remove duplicated function gpio_do_set_config()"
2020-02-13wireguard: device: use icmp_ndo_send helperJason A. Donenfeld
Because wireguard is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. This commit adds a small test to the wireguard test suite to ensure that the new functions continue doing the right thing in the context of wireguard. It does this by setting up a condition that will definately evoke an icmp error message from the driver, but along a nat'd path. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13sunvnet: use icmp_ndo_send helperJason A. Donenfeld
Because sunvnet is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. While we're at it, doing the additional route lookup before calling icmp_ndo_send is superfluous, since this is the job of the icmp code in the first place. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13gtp: use icmp_ndo_send helperJason A. Donenfeld
Because gtp is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13drm/msm/dpu: fix BGR565 vs RGB565 confusionRob Clark
The component order between the two was swapped, resulting in incorrect color when games with 565 visual hit the overlay path instead of GPU composition. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-02-13drm/msm/dsi/pll: call vco set rate explicitlyHarigovindan P
For a given byte clock, if VCO recalc value is exactly same as vco set rate value, vco_set_rate does not get called assuming VCO is already set to required value. But Due to GDSC toggle, VCO values are erased in the HW. To make sure VCO is programmed correctly, we forcefully call set_rate from vco_prepare. Signed-off-by: Harigovindan P <harigovi@codeaurora.org> Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-02-13drm/msm/dsi: save pll state before dsi host is powered offHarigovindan P
Save pll state before dsi host is powered off. Without this change some register values gets resetted. Signed-off-by: Harigovindan P <harigovi@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-02-13vt: selection, close sel_buffer raceJiri Slaby
syzkaller reported this UAF: BUG: KASAN: use-after-free in n_tty_receive_buf_common+0x2481/0x2940 drivers/tty/n_tty.c:1741 Read of size 1 at addr ffff8880089e40e9 by task syz-executor.1/13184 CPU: 0 PID: 13184 Comm: syz-executor.1 Not tainted 5.4.7 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Call Trace: ... kasan_report+0xe/0x20 mm/kasan/common.c:634 n_tty_receive_buf_common+0x2481/0x2940 drivers/tty/n_tty.c:1741 tty_ldisc_receive_buf+0xac/0x190 drivers/tty/tty_buffer.c:461 paste_selection+0x297/0x400 drivers/tty/vt/selection.c:372 tioclinux+0x20d/0x4e0 drivers/tty/vt/vt.c:3044 vt_ioctl+0x1bcf/0x28d0 drivers/tty/vt/vt_ioctl.c:364 tty_ioctl+0x525/0x15a0 drivers/tty/tty_io.c:2657 vfs_ioctl fs/ioctl.c:47 [inline] It is due to a race between parallel paste_selection (TIOCL_PASTESEL) and set_selection_user (TIOCL_SETSEL) invocations. One uses sel_buffer, while the other frees it and reallocates a new one for another selection. Add a mutex to close this race. The mutex takes care properly of sel_buffer and sel_buffer_lth only. The other selection global variables (like sel_start, sel_end, and sel_cons) are protected only in set_selection_user. The other functions need quite some more work to close the races of the variables there. This is going to happen later. This likely fixes (I am unsure as there is no reproducer provided) bug 206361 too. It was marked as CVE-2020-8648. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-by: syzbot+59997e8d5cbdc486e6f6@syzkaller.appspotmail.com References: https://bugzilla.kernel.org/show_bug.cgi?id=206361 Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200210081131.23572-2-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-13vt: selection, handle pending signals in paste_selectionJiri Slaby
When pasting a selection to a vt, the task is set as INTERRUPTIBLE while waiting for a tty to unthrottle. But signals are not handled at all. Normally, this is not a problem as tty_ldisc_receive_buf receives all the goods and a user has no reason to interrupt the task. There are two scenarios where this matters: 1) when the tty is throttled and a signal is sent to the process, it spins on a CPU until the tty is unthrottled. schedule() does not really echedule, but returns immediately, of course. 2) when the sel_buffer becomes invalid, KASAN prevents any reads from it and the loop simply does not proceed and spins forever (causing the tty to throttle, but the code never sleeps, the same as above). This sometimes happens as there is a race in the sel_buffer handling code. So add signal handling to this ioctl (TIOCL_PASTESEL) and return -EINTR in case a signal is pending. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200210081131.23572-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-13serial: cpm_uart: call cpm_muram_init before registering consoleRasmus Villemoes
Christophe reports that powerpc 8xx silently fails to 5.6-rc1. It turns out I was wrong about nobody relying on the lazy initialization of the cpm/qe muram in commit b6231ea2b3c6 (soc: fsl: qe: drop broken lazy call of cpm_muram_init()). Rather than reinstating the somewhat dubious lazy call (initializing a currently held spinlock, and implicitly doing a GFP_KERNEL under that spinlock), make sure that cpm_muram_init() is called early enough - I thought the calls from the subsys_initcalls were good enough, but when used by console drivers, that's obviously not the case. cpm_muram_init() is safe to call twice (there's an early return if it is already initialized), so keep the call from cpm_init() - in case SERIAL_CPM_CONSOLE=n. Fixes: b6231ea2b3c6 (soc: fsl: qe: drop broken lazy call of cpm_muram_init()) Reported-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> Link: https://lore.kernel.org/r/20200213114342.21712-1-linux@rasmusvillemoes.dk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-13RDMA/core: Fix protection fault in get_pkey_idx_qp_listLeon Romanovsky
We don't need to set pkey as valid in case that user set only one of pkey index or port number, otherwise it will be resulted in NULL pointer dereference while accessing to uninitialized pkey list. The following crash from Syzkaller revealed it. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 14753 Comm: syz-executor.2 Not tainted 5.5.0-rc5 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:get_pkey_idx_qp_list+0x161/0x2d0 Code: 01 00 00 49 8b 5e 20 4c 39 e3 0f 84 b9 00 00 00 e8 e4 42 6e fe 48 8d 7b 10 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 01 0f 8e d0 00 00 00 48 8d 7d 04 48 b8 RSP: 0018:ffffc9000bc6f950 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff82c8bdec RDX: 0000000000000002 RSI: ffffc900030a8000 RDI: 0000000000000010 RBP: ffff888112c8ce80 R08: 0000000000000004 R09: fffff5200178df1f R10: 0000000000000001 R11: fffff5200178df1f R12: ffff888115dc4430 R13: ffff888115da8498 R14: ffff888115dc4410 R15: ffff888115da8000 FS: 00007f20777de700(0000) GS:ffff88811b100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2f721000 CR3: 00000001173ca002 CR4: 0000000000360ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: port_pkey_list_insert+0xd7/0x7c0 ib_security_modify_qp+0x6fa/0xfc0 _ib_modify_qp+0x8c4/0xbf0 modify_qp+0x10da/0x16d0 ib_uverbs_modify_qp+0x9a/0x100 ib_uverbs_write+0xaa5/0xdf0 __vfs_write+0x7c/0x100 vfs_write+0x168/0x4a0 ksys_write+0xc8/0x200 do_syscall_64+0x9c/0x390 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: d291f1a65232 ("IB/core: Enforce PKey security on QPs") Link: https://lore.kernel.org/r/20200212080651.GB679970@unreal Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Message-Id: <20200212080651.GB679970@unreal>
2020-02-13Merge tag 'fixes-for-v5.6-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: USB: fixes for v5.6-rc1 DWC3 learned that we can't always depend on Event Status bits. A problem was solved which would only surface with scatter list on IN endpoints. DWC2 got a fix for feature requests (both set and clear) and GetStatus request. The serial gadget got a fix for a TX stall bug. Composite framework now works better for SSP devices. * tag 'fixes-for-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: dwc3: debug: fix string position formatting mixup with ret and len usb: gadget: serial: fix Tx stall after buffer overflow usb: gadget: ffs: ffs_aio_cancel(): Save/restore IRQ flags usb: dwc2: Fix SET/CLEAR_FEATURE and GET_STATUS flows usb: dwc2: Fix in ISOC request length checking usb: gadget: composite: Support more than 500mA MaxPower usb: gadget: composite: Fix bMaxPower for SuperSpeedPlus usb: gadget: u_audio: Fix high-speed max packet size usb: dwc3: gadget: Check for IOC/LST bit in TRB->ctrl fields
2020-02-13bcache: remove macro nr_to_fifo_front()Coly Li
Macro nr_to_fifo_front() is only used once in btree_flush_write(), it is unncessary indeed. This patch removes this macro and does calculation directly in place. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-13bcache: Revert "bcache: shrink btree node cache after bch_btree_check()"Coly Li
This reverts commit 1df3877ff6a4810054237c3259d900ded4468969. In my testing, sometimes even all the cached btree nodes are freed, creating gc and allocator kernel threads may still fail. Finally it turns out that kthread_run() may fail if there is pending signal for current task. And the pending signal is sent from OOM killer which is triggered by memory consuption in bch_btree_check(). Therefore explicitly shrinking bcache btree node here does not help, and after the shrinker callback is improved, as well as pending signals are ignored before creating kernel threads, now such operation is unncessary anymore. This patch reverts the commit 1df3877ff6a4 ("bcache: shrink btree node cache after bch_btree_check()") because we have better improvement now. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-13bcache: ignore pending signals when creating gc and allocator threadColy Li
When run a cache set, all the bcache btree node of this cache set will be checked by bch_btree_check(). If the bcache btree is very large, iterating all the btree nodes will occupy too much system memory and the bcache registering process might be selected and killed by system OOM killer. kthread_run() will fail if current process has pending signal, therefore the kthread creating in run_cache_set() for gc and allocator kernel threads are very probably failed for a very large bcache btree. Indeed such OOM is safe and the registering process will exit after the registration done. Therefore this patch flushes pending signals during the cache set start up, specificly in bch_cache_allocator_start() and bch_gc_thread_start(), to make sure run_cache_set() won't fail for large cahced data set. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-13dmaengine: idxd: Fix error handling in idxd_wq_cdev_dev_setup()Dan Carpenter
We can't call kfree(dev) after calling device_register(dev). The "dev" pointer has to be freed using put_device(). Fixes: 42d279f9137a ("dmaengine: idxd: add char driver to expose submission portal to userland") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20200205123248.hmtog7qa2eiqaagh@kili.mountain Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-13RDMA/rxe: Fix soft lockup problem due to using tasklets in softirqZhu Yanjun
When run stress tests with RXE, the following Call Traces often occur watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [swapper/2:0] ... Call Trace: <IRQ> create_object+0x3f/0x3b0 kmem_cache_alloc_node_trace+0x129/0x2d0 __kmalloc_reserve.isra.52+0x2e/0x80 __alloc_skb+0x83/0x270 rxe_init_packet+0x99/0x150 [rdma_rxe] rxe_requester+0x34e/0x11a0 [rdma_rxe] rxe_do_task+0x85/0xf0 [rdma_rxe] tasklet_action_common.isra.21+0xeb/0x100 __do_softirq+0xd0/0x298 irq_exit+0xc5/0xd0 smp_apic_timer_interrupt+0x68/0x120 apic_timer_interrupt+0xf/0x20 </IRQ> ... The root cause is that tasklet is actually a softirq. In a tasklet handler, another softirq handler is triggered. Usually these softirq handlers run on the same cpu core. So this will cause "soft lockup Bug". Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200212072635.682689-8-leon@kernel.org Signed-off-by: Zhu Yanjun <yanjunz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-02-13dmaengine: idxd: fix runaway module ref count on device driver bindDave Jiang
idxd_config_bus_probe() calls try_module_get() but never calls module_put() when it fails. Thus with every failed attempt, the ref count goes up. Add module_put() in failure paths. Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver") Reported-by: Jerry Chen <jerry.t.chen@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/158144296730.41381.12134210685456322434.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-13RDMA/mlx5: Prevent overflow in mmap offset calculationsLeon Romanovsky
The cmd and index variables declared as u16 and the result is supposed to be stored in u64. The C arithmetic rules doesn't promote "(index >> 8) << 16" to be u64 and leaves the end result to be u16. Fixes: 7be76bef320b ("IB/mlx5: Introduce VAR object and its alloc/destroy methods") Link: https://lore.kernel.org/r/20200212072635.682689-10-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-02-13IB/umad: Fix kernel crash while unloading ib_umadYonatan Cohen
When disassociating a device from umad we must ensure that the sysfs access is prevented before blocking the fops, otherwise assumptions in syfs don't hold: CPU0 CPU1 ib_umad_kill_port() ibdev_show() port->ib_dev = NULL dev_name(port->ib_dev) The prior patch made an error in moving the device_destroy(), it should have been split into device_del() (above) and put_device() (below). At this point we already have the split, so move the device_del() back to its original place. kernel stack PF: error_code(0x0000) - not-present page Oops: 0000 [#1] SMP DEBUG_PAGEALLOC PTI RIP: 0010:ibdev_show+0x18/0x50 [ib_umad] RSP: 0018:ffffc9000097fe40 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffffa0441120 RCX: ffff8881df514000 RDX: ffff8881df514000 RSI: ffffffffa0441120 RDI: ffff8881df1e8870 RBP: ffffffff81caf000 R08: ffff8881df1e8870 R09: 0000000000000000 R10: 0000000000001000 R11: 0000000000000003 R12: ffff88822f550b40 R13: 0000000000000001 R14: ffffc9000097ff08 R15: ffff8882238bad58 FS: 00007f1437ff3740(0000) GS:ffff888236940000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000004e8 CR3: 00000001e0dfc001 CR4: 00000000001606e0 Call Trace: dev_attr_show+0x15/0x50 sysfs_kf_seq_show+0xb8/0x1a0 seq_read+0x12d/0x350 vfs_read+0x89/0x140 ksys_read+0x55/0xd0 do_syscall_64+0x55/0x1b0 entry_SYSCALL_64_after_hwframe+0x44/0xa9: Fixes: cf7ad3030271 ("IB/umad: Avoid destroying device while it is accessed") Link: https://lore.kernel.org/r/20200212072635.682689-9-leon@kernel.org Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-02-13mmc: sdhci-msm: Mark sdhci_msm_cqe_disable staticStephen Boyd
This function is not exported and only used in this file. Mark it static. Cc: Ritesh Harjani <riteshh@codeaurora.org> Cc: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Fixes: 87a8df0dce6a ("mmc: sdhci-msm: Add CQHCI support for sdhci-msm") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200206162124.201195-1-swboyd@chromium.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-02-13RDMA/mlx5: Fix async events cleanup flowsYishai Hadas
As in the prior patch, the devx code is not fully cleaning up its event_lists before finishing driver_destroy allowing a later read to trigger user after free conditions. Re-arrange things so that the event_list is always empty after destroy and ensure it remains empty until the file is closed. Fixes: f7c8416ccea5 ("RDMA/core: Simplify destruction of FD uobjects") Link: https://lore.kernel.org/r/20200212072635.682689-7-leon@kernel.org Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-02-13RDMA/core: Add missing list deletion on freeing event queueMichael Guralnik
When the uobject file scheme was revised to allow device disassociation from the file it became possible for read() to still happen the driver destroys the uobject. The old clode code was not tolerant to concurrent read, and when it was moved to the driver destroy it creates a bug. Ensure the event_list is empty after driver destroy by adding the missing list_del(). Otherwise read() can trigger a use after free and double kfree. Fixes: f7c8416ccea5 ("RDMA/core: Simplify destruction of FD uobjects") Link: https://lore.kernel.org/r/20200212072635.682689-6-leon@kernel.org Signed-off-by: Michael Guralnik <michaelgur@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-02-13thunderbolt: Prevent crash if non-active NVMem file is readMika Westerberg
The driver does not populate .reg_read callback for the non-active NVMem because the file is supposed to be write-only. However, it turns out NVMem subsystem does not yet support this and expects that the .reg_read callback is provided. If user reads the binary attribute it triggers NULL pointer dereference like this one: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: bin_attr_nvmem_read+0x64/0x80 kernfs_fop_read+0xa7/0x180 vfs_read+0xbd/0x170 ksys_read+0x5a/0xd0 do_syscall_64+0x43/0x150 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this in the driver by providing .reg_read callback that always returns an error. Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Fixes: e6b245ccd524 ("thunderbolt: Add support for host and device NVM firmware upgrade") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200213095604.1074-1-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-13Merge tag 'usb-serial-5.6-rc2' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.6-rc2 Here's a fix for a ch341 regression in 5.5 which people have started to hit, and a fix for a logic error in an ir-usb error path. Both have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'usb-serial-5.6-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: ch341: fix receiver regression USB: serial: ir-usb: Silence harmless uninitialized variable warning
2020-02-13EDAC/sysfs: Remove csrow objects on errorsRobert Richter
All created csrow objects must be removed in the error path of edac_create_csrow_objects(). The objects have been added as devices. They need to be removed by doing a device_del() *and* put_device() call to also free their memory. The missing put_device() leaves a memory leak. Use device_unregister() instead of device_del() which properly unregisters the device doing both. Fixes: 7adc05d2dc3a ("EDAC/sysfs: Drop device references properly") Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: John Garry <john.garry@huawei.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200212120340.4764-4-rrichter@marvell.com
2020-02-13EDAC/mc: Fix use-after-free and memleaks during device removalRobert Richter
A test kernel with the options DEBUG_TEST_DRIVER_REMOVE, KASAN and DEBUG_KMEMLEAK set, revealed several issues when removing an mci device: 1) Use-after-free: On 27.11.19 17:07:33, John Garry wrote: > [ 22.104498] BUG: KASAN: use-after-free in > edac_remove_sysfs_mci_device+0x148/0x180 The use-after-free is caused by the mci_for_each_dimm() macro called in edac_remove_sysfs_mci_device(). The iterator was introduced with c498afaf7df8 ("EDAC: Introduce an mci_for_each_dimm() iterator"). The iterator loop calls device_unregister(&dimm->dev), which removes the sysfs entry of the device, but also frees the dimm struct in dimm_attr_release(). When incrementing the loop in mci_for_each_dimm(), the dimm struct is accessed again, after having been freed already. The fix is to free all the mci device's subsequent dimm and csrow objects at a later point, in _edac_mc_free(), when the mci device itself is being freed. This keeps the data structures intact and the mci device can be fully used until its removal. The change allows the safe usage of mci_for_each_dimm() to release dimm devices from sysfs. 2) Memory leaks: Following memory leaks have been detected: # grep edac /sys/kernel/debug/kmemleak | sort | uniq -c 1 [<000000003c0f58f9>] edac_mc_alloc+0x3bc/0x9d0 # mci->csrows 16 [<00000000bb932dc0>] edac_mc_alloc+0x49c/0x9d0 # csr->channels 16 [<00000000e2734dba>] edac_mc_alloc+0x518/0x9d0 # csr->channels[chn] 1 [<00000000eb040168>] edac_mc_alloc+0x5c8/0x9d0 # mci->dimms 34 [<00000000ef737c29>] ghes_edac_register+0x1c8/0x3f8 # see edac_mc_alloc() All leaks are from memory allocated by edac_mc_alloc(). Note: The test above shows that edac_mc_alloc() was called here from ghes_edac_register(), thus both functions show up in the stack trace but the module causing the leaks is edac_mc. The comments with the data structures involved were made manually by analyzing the objdump. The data structures listed above and created by edac_mc_alloc() are not properly removed during device removal, which is done in edac_mc_free(). There are two paths implemented to remove the device depending on device registration, _edac_mc_free() is called if the device is not registered and edac_unregister_sysfs() otherwise. The implemenations differ. For the sysfs case, the mci device removal lacks the removal of subsequent data structures (csrows, channels, dimms). This causes the memory leaks (see mci_attr_release()). [ bp: Massage commit message. ] Fixes: c498afaf7df8 ("EDAC: Introduce an mci_for_each_dimm() iterator") Fixes: faa2ad09c01c ("edac_mc: edac_mc_free() cannot assume mem_ctl_info is registered in sysfs.") Fixes: 7a623c039075 ("edac: rewrite the sysfs code to use struct device") Reported-by: John Garry <john.garry@huawei.com> Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: John Garry <john.garry@huawei.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200212120340.4764-3-rrichter@marvell.com
generated by cgit (git 2.34.1) at 2025-09-12 16:20:48 +0000